Debug: "kill" option on ACL control=debug. Bug 1831
[exim.git] / src / src / acl.c
CommitLineData
059ec3d9
PH
1/*************************************************
2* Exim - an Internet mail transport agent *
3*************************************************/
4
80fea873 5/* Copyright (c) University of Cambridge 1995 - 2016 */
059ec3d9
PH
6/* See the file NOTICE for conditions of use and distribution. */
7
8/* Code for handling Access Control Lists (ACLs) */
9
10#include "exim.h"
11
12
13/* Default callout timeout */
14
15#define CALLOUT_TIMEOUT_DEFAULT 30
16
17/* ACL verb codes - keep in step with the table of verbs that follows */
18
19enum { ACL_ACCEPT, ACL_DEFER, ACL_DENY, ACL_DISCARD, ACL_DROP, ACL_REQUIRE,
20 ACL_WARN };
21
22/* ACL verbs */
23
f9d04f08
JH
24static uschar *verbs[] = {
25 US"accept",
26 US"defer",
27 US"deny",
28 US"discard",
29 US"drop",
30 US"require",
059ec3d9
PH
31 US"warn" };
32
4e88a19f
PH
33/* For each verb, the conditions for which "message" or "log_message" are used
34are held as a bitmap. This is to avoid expanding the strings unnecessarily. For
35"accept", the FAIL case is used only after "endpass", but that is selected in
36the code. */
37
38static int msgcond[] = {
39 (1<<OK) | (1<<FAIL) | (1<<FAIL_DROP), /* accept */
40 (1<<OK), /* defer */
41 (1<<OK), /* deny */
42 (1<<OK) | (1<<FAIL) | (1<<FAIL_DROP), /* discard */
43 (1<<OK), /* drop */
44 (1<<FAIL) | (1<<FAIL_DROP), /* require */
45 (1<<OK) /* warn */
46 };
059ec3d9
PH
47
48/* ACL condition and modifier codes - keep in step with the table that
71fafd95
PH
49follows, and the cond_expand_at_top and uschar cond_modifiers tables lower
50down. */
059ec3d9 51
71fafd95
PH
52enum { ACLC_ACL,
53 ACLC_ADD_HEADER,
54 ACLC_AUTHENTICATED,
8523533c
TK
55#ifdef EXPERIMENTAL_BRIGHTMAIL
56 ACLC_BMI_OPTIN,
57#endif
71fafd95 58 ACLC_CONDITION,
c3611384 59 ACLC_CONTINUE,
71fafd95 60 ACLC_CONTROL,
6a8f9482
TK
61#ifdef EXPERIMENTAL_DCC
62 ACLC_DCC,
63#endif
8523533c
TK
64#ifdef WITH_CONTENT_SCAN
65 ACLC_DECODE,
66#endif
67 ACLC_DELAY,
80a47a2c
TK
68#ifndef DISABLE_DKIM
69 ACLC_DKIM_SIGNER,
70 ACLC_DKIM_STATUS,
fb2274d4 71#endif
4840604e
TL
72#ifdef EXPERIMENTAL_DMARC
73 ACLC_DMARC_STATUS,
74#endif
71fafd95
PH
75 ACLC_DNSLISTS,
76 ACLC_DOMAINS,
77 ACLC_ENCRYPTED,
78 ACLC_ENDPASS,
79 ACLC_HOSTS,
80 ACLC_LOCAL_PARTS,
81 ACLC_LOG_MESSAGE,
6ea85e9a 82 ACLC_LOG_REJECT_TARGET,
71fafd95 83 ACLC_LOGWRITE,
8523533c
TK
84#ifdef WITH_CONTENT_SCAN
85 ACLC_MALWARE,
86#endif
87 ACLC_MESSAGE,
88#ifdef WITH_CONTENT_SCAN
89 ACLC_MIME_REGEX,
90#endif
870f6ba8 91 ACLC_RATELIMIT,
8523533c
TK
92 ACLC_RECIPIENTS,
93#ifdef WITH_CONTENT_SCAN
94 ACLC_REGEX,
95#endif
e7568d51 96 ACLC_REMOVE_HEADER,
71fafd95
PH
97 ACLC_SENDER_DOMAINS,
98 ACLC_SENDERS,
99 ACLC_SET,
8523533c 100#ifdef WITH_CONTENT_SCAN
8e669ac1 101 ACLC_SPAM,
8523533c
TK
102#endif
103#ifdef EXPERIMENTAL_SPF
104 ACLC_SPF,
65a7d8c3 105 ACLC_SPF_GUESS,
8523533c 106#endif
b0019c78 107 ACLC_UDPSEND,
8523533c 108 ACLC_VERIFY };
059ec3d9 109
c3611384
PH
110/* ACL conditions/modifiers: "delay", "control", "continue", "endpass",
111"message", "log_message", "log_reject_target", "logwrite", and "set" are
112modifiers that look like conditions but always return TRUE. They are used for
113their side effects. */
059ec3d9 114
9a26b6b2
PH
115static uschar *conditions[] = {
116 US"acl",
71fafd95 117 US"add_header",
9a26b6b2 118 US"authenticated",
8523533c
TK
119#ifdef EXPERIMENTAL_BRIGHTMAIL
120 US"bmi_optin",
121#endif
122 US"condition",
c3611384 123 US"continue",
8e669ac1 124 US"control",
6a8f9482
TK
125#ifdef EXPERIMENTAL_DCC
126 US"dcc",
127#endif
8523533c
TK
128#ifdef WITH_CONTENT_SCAN
129 US"decode",
130#endif
131 US"delay",
80a47a2c
TK
132#ifndef DISABLE_DKIM
133 US"dkim_signers",
134 US"dkim_status",
fb2274d4 135#endif
4840604e
TL
136#ifdef EXPERIMENTAL_DMARC
137 US"dmarc_status",
138#endif
6ea85e9a
PH
139 US"dnslists",
140 US"domains",
141 US"encrypted",
142 US"endpass",
143 US"hosts",
144 US"local_parts",
145 US"log_message",
146 US"log_reject_target",
147 US"logwrite",
8523533c
TK
148#ifdef WITH_CONTENT_SCAN
149 US"malware",
150#endif
151 US"message",
152#ifdef WITH_CONTENT_SCAN
153 US"mime_regex",
154#endif
870f6ba8 155 US"ratelimit",
8523533c
TK
156 US"recipients",
157#ifdef WITH_CONTENT_SCAN
158 US"regex",
159#endif
e7568d51 160 US"remove_header",
8523533c
TK
161 US"sender_domains", US"senders", US"set",
162#ifdef WITH_CONTENT_SCAN
163 US"spam",
164#endif
165#ifdef EXPERIMENTAL_SPF
166 US"spf",
65a7d8c3 167 US"spf_guess",
8523533c 168#endif
b0019c78 169 US"udpsend",
059ec3d9 170 US"verify" };
8e669ac1 171
c5fcb476 172
9a26b6b2
PH
173/* Return values from decode_control(); keep in step with the table of names
174that follows! */
175
176enum {
c46782ef 177 CONTROL_AUTH_UNADVERTISED,
3c8b3577 178#ifdef EXPERIMENTAL_BRIGHTMAIL
9a26b6b2 179 CONTROL_BMI_RUN,
3c8b3577 180#endif
ed7f7860 181 CONTROL_DEBUG,
3c8b3577 182#ifndef DISABLE_DKIM
f7572e5a 183 CONTROL_DKIM_VERIFY,
3c8b3577
JH
184#endif
185#ifdef EXPERIMENTAL_DMARC
4840604e
TL
186 CONTROL_DMARC_VERIFY,
187 CONTROL_DMARC_FORENSIC,
3c8b3577 188#endif
13363eba 189 CONTROL_DSCP,
c46782ef
PH
190 CONTROL_ERROR,
191 CONTROL_CASEFUL_LOCAL_PART,
192 CONTROL_CASELOWER_LOCAL_PART,
e4bdf652 193 CONTROL_CUTTHROUGH_DELIVERY,
c46782ef
PH
194 CONTROL_ENFORCE_SYNC,
195 CONTROL_NO_ENFORCE_SYNC,
196 CONTROL_FREEZE,
197 CONTROL_QUEUE_ONLY,
198 CONTROL_SUBMISSION,
199 CONTROL_SUPPRESS_LOCAL_FIXUPS,
3c8b3577 200#ifdef WITH_CONTENT_SCAN
9a26b6b2 201 CONTROL_NO_MBOX_UNSPOOL,
3c8b3577 202#endif
c46782ef
PH
203 CONTROL_FAKEDEFER,
204 CONTROL_FAKEREJECT,
8c5d388a 205#ifdef SUPPORT_I18N
3c8b3577
JH
206 CONTROL_UTF8_DOWNCONVERT,
207#endif
cf8b11a5 208 CONTROL_NO_MULTILINE,
047bdd8c 209 CONTROL_NO_PIPELINING,
4c590bd1
PH
210 CONTROL_NO_DELAY_FLUSH,
211 CONTROL_NO_CALLOUT_FLUSH
c46782ef 212};
9a26b6b2 213
8800895a
PH
214/* ACL control names; keep in step with the table above! This list is used for
215turning ids into names. The actual list of recognized names is in the variable
216control_def controls_list[] below. The fact that there are two lists is a mess
217and should be tidied up. */
9a26b6b2
PH
218
219static uschar *controls[] = {
c46782ef 220 US"allow_auth_unadvertised",
3c8b3577 221#ifdef EXPERIMENTAL_BRIGHTMAIL
9a26b6b2 222 US"bmi_run",
3c8b3577 223#endif
ed7f7860 224 US"debug",
3c8b3577 225#ifndef DISABLE_DKIM
80a47a2c 226 US"dkim_disable_verify",
3c8b3577
JH
227#endif
228#ifdef EXPERIMENTAL_DMARC
4840604e
TL
229 US"dmarc_disable_verify",
230 US"dmarc_enable_forensic",
3c8b3577 231#endif
13363eba 232 US"dscp",
c46782ef
PH
233 US"error",
234 US"caseful_local_part",
235 US"caselower_local_part",
e4bdf652 236 US"cutthrough_delivery",
c46782ef
PH
237 US"enforce_sync",
238 US"no_enforce_sync",
239 US"freeze",
240 US"queue_only",
241 US"submission",
242 US"suppress_local_fixups",
3c8b3577 243#ifdef WITH_CONTENT_SCAN
9a26b6b2 244 US"no_mbox_unspool",
3c8b3577 245#endif
cf8b11a5
PH
246 US"fakedefer",
247 US"fakereject",
8c5d388a 248#ifdef SUPPORT_I18N
3c8b3577
JH
249 US"utf8_downconvert",
250#endif
aa6dc513 251 US"no_multiline_responses",
cf8b11a5 252 US"no_pipelining",
4c590bd1
PH
253 US"no_delay_flush",
254 US"no_callout_flush"
c46782ef 255};
059ec3d9 256
047bdd8c 257/* Flags to indicate for which conditions/modifiers a string expansion is done
059ec3d9
PH
258at the outer level. In the other cases, expansion already occurs in the
259checking functions. */
260
261static uschar cond_expand_at_top[] = {
7421ecab 262 FALSE, /* acl */
3e536984 263 TRUE, /* add_header */
059ec3d9 264 FALSE, /* authenticated */
8523533c
TK
265#ifdef EXPERIMENTAL_BRIGHTMAIL
266 TRUE, /* bmi_optin */
8e669ac1 267#endif
059ec3d9 268 TRUE, /* condition */
c3611384 269 TRUE, /* continue */
059ec3d9 270 TRUE, /* control */
6a8f9482
TK
271#ifdef EXPERIMENTAL_DCC
272 TRUE, /* dcc */
273#endif
8523533c
TK
274#ifdef WITH_CONTENT_SCAN
275 TRUE, /* decode */
276#endif
059ec3d9 277 TRUE, /* delay */
80a47a2c
TK
278#ifndef DISABLE_DKIM
279 TRUE, /* dkim_signers */
280 TRUE, /* dkim_status */
fb2274d4 281#endif
4840604e
TL
282#ifdef EXPERIMENTAL_DMARC
283 TRUE, /* dmarc_status */
284#endif
059ec3d9
PH
285 TRUE, /* dnslists */
286 FALSE, /* domains */
287 FALSE, /* encrypted */
288 TRUE, /* endpass */
289 FALSE, /* hosts */
290 FALSE, /* local_parts */
291 TRUE, /* log_message */
6ea85e9a 292 TRUE, /* log_reject_target */
059ec3d9 293 TRUE, /* logwrite */
8523533c
TK
294#ifdef WITH_CONTENT_SCAN
295 TRUE, /* malware */
296#endif
059ec3d9 297 TRUE, /* message */
8523533c
TK
298#ifdef WITH_CONTENT_SCAN
299 TRUE, /* mime_regex */
300#endif
870f6ba8 301 TRUE, /* ratelimit */
059ec3d9 302 FALSE, /* recipients */
8523533c
TK
303#ifdef WITH_CONTENT_SCAN
304 TRUE, /* regex */
305#endif
e7568d51 306 TRUE, /* remove_header */
059ec3d9
PH
307 FALSE, /* sender_domains */
308 FALSE, /* senders */
309 TRUE, /* set */
8523533c
TK
310#ifdef WITH_CONTENT_SCAN
311 TRUE, /* spam */
312#endif
313#ifdef EXPERIMENTAL_SPF
314 TRUE, /* spf */
65a7d8c3 315 TRUE, /* spf_guess */
8523533c 316#endif
b0019c78 317 TRUE, /* udpsend */
059ec3d9
PH
318 TRUE /* verify */
319};
320
321/* Flags to identify the modifiers */
322
323static uschar cond_modifiers[] = {
324 FALSE, /* acl */
3e536984 325 TRUE, /* add_header */
059ec3d9 326 FALSE, /* authenticated */
8523533c
TK
327#ifdef EXPERIMENTAL_BRIGHTMAIL
328 TRUE, /* bmi_optin */
8e669ac1 329#endif
059ec3d9 330 FALSE, /* condition */
c3611384 331 TRUE, /* continue */
059ec3d9 332 TRUE, /* control */
6a8f9482
TK
333#ifdef EXPERIMENTAL_DCC
334 FALSE, /* dcc */
335#endif
8523533c
TK
336#ifdef WITH_CONTENT_SCAN
337 FALSE, /* decode */
338#endif
059ec3d9 339 TRUE, /* delay */
80a47a2c
TK
340#ifndef DISABLE_DKIM
341 FALSE, /* dkim_signers */
342 FALSE, /* dkim_status */
fb2274d4 343#endif
4840604e
TL
344#ifdef EXPERIMENTAL_DMARC
345 FALSE, /* dmarc_status */
346#endif
059ec3d9
PH
347 FALSE, /* dnslists */
348 FALSE, /* domains */
349 FALSE, /* encrypted */
350 TRUE, /* endpass */
351 FALSE, /* hosts */
352 FALSE, /* local_parts */
353 TRUE, /* log_message */
6ea85e9a 354 TRUE, /* log_reject_target */
8523533c
TK
355 TRUE, /* logwrite */
356#ifdef WITH_CONTENT_SCAN
357 FALSE, /* malware */
358#endif
059ec3d9 359 TRUE, /* message */
8523533c
TK
360#ifdef WITH_CONTENT_SCAN
361 FALSE, /* mime_regex */
362#endif
870f6ba8 363 FALSE, /* ratelimit */
059ec3d9 364 FALSE, /* recipients */
8523533c
TK
365#ifdef WITH_CONTENT_SCAN
366 FALSE, /* regex */
367#endif
e7568d51 368 TRUE, /* remove_header */
059ec3d9
PH
369 FALSE, /* sender_domains */
370 FALSE, /* senders */
371 TRUE, /* set */
8523533c
TK
372#ifdef WITH_CONTENT_SCAN
373 FALSE, /* spam */
374#endif
375#ifdef EXPERIMENTAL_SPF
376 FALSE, /* spf */
65a7d8c3 377 FALSE, /* spf_guess */
8523533c 378#endif
b0019c78 379 TRUE, /* udpsend */
059ec3d9
PH
380 FALSE /* verify */
381};
382
c3611384 383/* Bit map vector of which conditions and modifiers are not allowed at certain
8f128379
PH
384times. For each condition and modifier, there's a bitmap of dis-allowed times.
385For some, it is easier to specify the negation of a small number of allowed
386times. */
059ec3d9
PH
387
388static unsigned int cond_forbids[] = {
389 0, /* acl */
8e669ac1 390
71fafd95 391 (unsigned int)
45b91596 392 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* add_header */
71fafd95 393 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
8ccd00b1 394 #ifndef DISABLE_PRDR
fd98a5c6
JH
395 (1<<ACL_WHERE_PRDR)|
396 #endif
45b91596 397 (1<<ACL_WHERE_MIME)|(1<<ACL_WHERE_NOTSMTP)|
67caae1f 398 (1<<ACL_WHERE_DKIM)|
45b91596 399 (1<<ACL_WHERE_NOTSMTP_START)),
71fafd95 400
45b91596
PH
401 (1<<ACL_WHERE_NOTSMTP)| /* authenticated */
402 (1<<ACL_WHERE_NOTSMTP_START)|
403 (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO),
8e669ac1 404
71fafd95 405 #ifdef EXPERIMENTAL_BRIGHTMAIL
3864bb8e 406 (1<<ACL_WHERE_AUTH)| /* bmi_optin */
8523533c
TK
407 (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
408 (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_MIME)|
8ccd00b1 409 #ifndef DISABLE_PRDR
fd98a5c6
JH
410 (1<<ACL_WHERE_PRDR)|
411 #endif
8e669ac1 412 (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
8523533c
TK
413 (1<<ACL_WHERE_MAILAUTH)|
414 (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
45b91596
PH
415 (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_PREDATA)|
416 (1<<ACL_WHERE_NOTSMTP_START),
71fafd95 417 #endif
8e669ac1 418
059ec3d9 419 0, /* condition */
8e669ac1 420
c3611384
PH
421 0, /* continue */
422
059ec3d9 423 /* Certain types of control are always allowed, so we let it through
2f079f46 424 always and check in the control processing itself. */
8e669ac1 425
059ec3d9 426 0, /* control */
8e669ac1 427
6a8f9482
TK
428 #ifdef EXPERIMENTAL_DCC
429 (unsigned int)
fd98a5c6 430 ~((1<<ACL_WHERE_DATA)| /* dcc */
8ccd00b1 431 #ifndef DISABLE_PRDR
fd98a5c6 432 (1<<ACL_WHERE_PRDR)|
8ccd00b1 433 #endif
fd98a5c6 434 (1<<ACL_WHERE_NOTSMTP)),
6a8f9482
TK
435 #endif
436
71fafd95 437 #ifdef WITH_CONTENT_SCAN
2f079f46
PH
438 (unsigned int)
439 ~(1<<ACL_WHERE_MIME), /* decode */
71fafd95 440 #endif
8523533c 441
8f128379 442 (1<<ACL_WHERE_NOTQUIT), /* delay */
8e669ac1 443
80a47a2c
TK
444 #ifndef DISABLE_DKIM
445 (unsigned int)
446 ~(1<<ACL_WHERE_DKIM), /* dkim_signers */
84330b7b 447
80a47a2c
TK
448 (unsigned int)
449 ~(1<<ACL_WHERE_DKIM), /* dkim_status */
71fafd95 450 #endif
fb2274d4 451
4840604e
TL
452 #ifdef EXPERIMENTAL_DMARC
453 (unsigned int)
454 ~(1<<ACL_WHERE_DATA), /* dmarc_status */
455 #endif
456
379ba7d0
JH
457 /* Explicit key lookups can be made in non-smtp ACLs so pass
458 always and check in the verify processing itself. */
459
460 0, /* dnslists */
059ec3d9 461
2f079f46 462 (unsigned int)
fd98a5c6 463 ~((1<<ACL_WHERE_RCPT) /* domains */
4f6ae5c3 464 |(1<<ACL_WHERE_VRFY)
8ccd00b1 465 #ifndef DISABLE_PRDR
fd98a5c6
JH
466 |(1<<ACL_WHERE_PRDR)
467 #endif
468 ),
059ec3d9 469
45b91596
PH
470 (1<<ACL_WHERE_NOTSMTP)| /* encrypted */
471 (1<<ACL_WHERE_CONNECT)|
472 (1<<ACL_WHERE_NOTSMTP_START)|
059ec3d9 473 (1<<ACL_WHERE_HELO),
8e669ac1 474
059ec3d9 475 0, /* endpass */
8e669ac1 476
45b91596
PH
477 (1<<ACL_WHERE_NOTSMTP)| /* hosts */
478 (1<<ACL_WHERE_NOTSMTP_START),
059ec3d9 479
2f079f46 480 (unsigned int)
fd98a5c6 481 ~((1<<ACL_WHERE_RCPT) /* local_parts */
4f6ae5c3 482 |(1<<ACL_WHERE_VRFY)
2e6afa4f 483 #ifndef DISABLE_PRDR
fd98a5c6
JH
484 |(1<<ACL_WHERE_PRDR)
485 #endif
486 ),
059ec3d9
PH
487
488 0, /* log_message */
8e669ac1 489
6ea85e9a
PH
490 0, /* log_reject_target */
491
059ec3d9 492 0, /* logwrite */
8e669ac1 493
71fafd95 494 #ifdef WITH_CONTENT_SCAN
2f079f46 495 (unsigned int)
fd98a5c6 496 ~((1<<ACL_WHERE_DATA)| /* malware */
8ccd00b1 497 #ifndef DISABLE_PRDR
fd98a5c6 498 (1<<ACL_WHERE_PRDR)|
8ccd00b1 499 #endif
fd98a5c6 500 (1<<ACL_WHERE_NOTSMTP)),
71fafd95 501 #endif
8523533c 502
059ec3d9
PH
503 0, /* message */
504
71fafd95 505 #ifdef WITH_CONTENT_SCAN
2f079f46
PH
506 (unsigned int)
507 ~(1<<ACL_WHERE_MIME), /* mime_regex */
71fafd95 508 #endif
8523533c 509
870f6ba8
TF
510 0, /* ratelimit */
511
2f079f46
PH
512 (unsigned int)
513 ~(1<<ACL_WHERE_RCPT), /* recipients */
059ec3d9 514
71fafd95 515 #ifdef WITH_CONTENT_SCAN
2f079f46 516 (unsigned int)
fd98a5c6 517 ~((1<<ACL_WHERE_DATA)| /* regex */
8ccd00b1 518 #ifndef DISABLE_PRDR
fd98a5c6 519 (1<<ACL_WHERE_PRDR)|
8ccd00b1 520 #endif
fd98a5c6 521 (1<<ACL_WHERE_NOTSMTP)|
2f079f46 522 (1<<ACL_WHERE_MIME)),
71fafd95 523 #endif
8523533c 524
e7568d51
TL
525 (unsigned int)
526 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* remove_header */
527 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
8ccd00b1 528 #ifndef DISABLE_PRDR
fd98a5c6
JH
529 (1<<ACL_WHERE_PRDR)|
530 #endif
e7568d51
TL
531 (1<<ACL_WHERE_MIME)|(1<<ACL_WHERE_NOTSMTP)|
532 (1<<ACL_WHERE_NOTSMTP_START)),
533
059ec3d9
PH
534 (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* sender_domains */
535 (1<<ACL_WHERE_HELO)|
536 (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
537 (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
538 (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY),
539
540 (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* senders */
541 (1<<ACL_WHERE_HELO)|
542 (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
543 (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
544 (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY),
545
546 0, /* set */
547
71fafd95 548 #ifdef WITH_CONTENT_SCAN
2f079f46 549 (unsigned int)
fd98a5c6 550 ~((1<<ACL_WHERE_DATA)| /* spam */
8ccd00b1 551 #ifndef DISABLE_PRDR
fd98a5c6 552 (1<<ACL_WHERE_PRDR)|
8ccd00b1 553 #endif
fd98a5c6 554 (1<<ACL_WHERE_NOTSMTP)),
71fafd95 555 #endif
8523533c 556
71fafd95 557 #ifdef EXPERIMENTAL_SPF
8523533c
TK
558 (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* spf */
559 (1<<ACL_WHERE_HELO)|
560 (1<<ACL_WHERE_MAILAUTH)|
561 (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
45b91596
PH
562 (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY)|
563 (1<<ACL_WHERE_NOTSMTP)|
564 (1<<ACL_WHERE_NOTSMTP_START),
65a7d8c3
NM
565
566 (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* spf_guess */
567 (1<<ACL_WHERE_HELO)|
568 (1<<ACL_WHERE_MAILAUTH)|
569 (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
570 (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY)|
571 (1<<ACL_WHERE_NOTSMTP)|
572 (1<<ACL_WHERE_NOTSMTP_START),
71fafd95 573 #endif
8523533c 574
b0019c78
TF
575 0, /* udpsend */
576
059ec3d9
PH
577 /* Certain types of verify are always allowed, so we let it through
578 always and check in the verify function itself */
579
580 0 /* verify */
059ec3d9
PH
581};
582
583
c5fcb476
PH
584/* Bit map vector of which controls are not allowed at certain times. For
585each control, there's a bitmap of dis-allowed times. For some, it is easier to
586specify the negation of a small number of allowed times. */
587
588static unsigned int control_forbids[] = {
c46782ef
PH
589 (unsigned int)
590 ~((1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)), /* allow_auth_unadvertised */
591
3c8b3577 592#ifdef EXPERIMENTAL_BRIGHTMAIL
8523533c 593 0, /* bmi_run */
3c8b3577 594#endif
c46782ef 595
ed7f7860
PP
596 0, /* debug */
597
3c8b3577 598#ifndef DISABLE_DKIM
80a47a2c 599 (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)| /* dkim_disable_verify */
3c8b3577 600# ifndef DISABLE_PRDR
fd98a5c6 601 (1<<ACL_WHERE_PRDR)|
3c8b3577 602# endif
f7572e5a 603 (1<<ACL_WHERE_NOTSMTP_START),
3c8b3577 604#endif
f7572e5a 605
3c8b3577 606#ifdef EXPERIMENTAL_DMARC
4840604e
TL
607 (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)| /* dmarc_disable_verify */
608 (1<<ACL_WHERE_NOTSMTP_START),
609 (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)| /* dmarc_enable_forensic */
610 (1<<ACL_WHERE_NOTSMTP_START),
3c8b3577 611#endif
4840604e 612
13363eba
PP
613 (1<<ACL_WHERE_NOTSMTP)|
614 (1<<ACL_WHERE_NOTSMTP_START)|
615 (1<<ACL_WHERE_NOTQUIT), /* dscp */
616
c5fcb476 617 0, /* error */
8e669ac1
PH
618
619 (unsigned int)
c5fcb476 620 ~(1<<ACL_WHERE_RCPT), /* caseful_local_part */
8e669ac1
PH
621
622 (unsigned int)
c5fcb476 623 ~(1<<ACL_WHERE_RCPT), /* caselower_local_part */
8e669ac1 624
e4bdf652
JH
625 (unsigned int)
626 0, /* cutthrough_delivery */
627
45b91596
PH
628 (1<<ACL_WHERE_NOTSMTP)| /* enforce_sync */
629 (1<<ACL_WHERE_NOTSMTP_START),
8e669ac1 630
45b91596
PH
631 (1<<ACL_WHERE_NOTSMTP)| /* no_enforce_sync */
632 (1<<ACL_WHERE_NOTSMTP_START),
8e669ac1
PH
633
634 (unsigned int)
c5fcb476
PH
635 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* freeze */
636 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
fd98a5c6 637 // (1<<ACL_WHERE_PRDR)| /* Not allow one user to freeze for all */
e715ad22 638 (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_MIME)),
8e669ac1
PH
639
640 (unsigned int)
c5fcb476
PH
641 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* queue_only */
642 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
fd98a5c6 643 // (1<<ACL_WHERE_PRDR)| /* Not allow one user to freeze for all */
e715ad22 644 (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_MIME)),
8e669ac1
PH
645
646 (unsigned int)
c5fcb476 647 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* submission */
8e669ac1 648 (1<<ACL_WHERE_PREDATA)),
8523533c 649
8800895a
PH
650 (unsigned int)
651 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* suppress_local_fixups */
45b91596
PH
652 (1<<ACL_WHERE_PREDATA)|
653 (1<<ACL_WHERE_NOTSMTP_START)),
8800895a 654
3c8b3577 655#ifdef WITH_CONTENT_SCAN
8e669ac1 656 (unsigned int)
14d57970 657 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* no_mbox_unspool */
e715ad22 658 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
fd98a5c6 659 // (1<<ACL_WHERE_PRDR)| /* Not allow one user to freeze for all */
e715ad22 660 (1<<ACL_WHERE_MIME)),
3c8b3577 661#endif
a6c4ab60 662
8e669ac1 663 (unsigned int)
29aba418
TF
664 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* fakedefer */
665 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
3c8b3577 666#ifndef DISABLE_PRDR
fd98a5c6 667 (1<<ACL_WHERE_PRDR)|
3c8b3577 668#endif
29aba418
TF
669 (1<<ACL_WHERE_MIME)),
670
671 (unsigned int)
a6c4ab60 672 ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* fakereject */
e715ad22 673 (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
3c8b3577 674#ifndef DISABLE_PRDR
fd98a5c6 675 (1<<ACL_WHERE_PRDR)|
3c8b3577 676#endif
e715ad22 677 (1<<ACL_WHERE_MIME)),
8523533c 678
8c5d388a 679#ifdef SUPPORT_I18N
3c8b3577
JH
680 0, /* utf8_downconvert */
681#endif
682
45b91596 683 (1<<ACL_WHERE_NOTSMTP)| /* no_multiline */
cf8b11a5
PH
684 (1<<ACL_WHERE_NOTSMTP_START),
685
686 (1<<ACL_WHERE_NOTSMTP)| /* no_pipelining */
047bdd8c
PH
687 (1<<ACL_WHERE_NOTSMTP_START),
688
689 (1<<ACL_WHERE_NOTSMTP)| /* no_delay_flush */
4c590bd1
PH
690 (1<<ACL_WHERE_NOTSMTP_START),
691
692 (1<<ACL_WHERE_NOTSMTP)| /* no_callout_flush */
45b91596 693 (1<<ACL_WHERE_NOTSMTP_START)
c5fcb476
PH
694};
695
696/* Structure listing various control arguments, with their characteristics. */
059ec3d9
PH
697
698typedef struct control_def {
699 uschar *name;
700 int value; /* CONTROL_xxx value */
059ec3d9
PH
701 BOOL has_option; /* Has /option(s) following */
702} control_def;
703
704static control_def controls_list[] = {
3c8b3577 705 { US"allow_auth_unadvertised", CONTROL_AUTH_UNADVERTISED, FALSE },
8523533c 706#ifdef EXPERIMENTAL_BRIGHTMAIL
3c8b3577 707 { US"bmi_run", CONTROL_BMI_RUN, FALSE },
8523533c 708#endif
3c8b3577 709 { US"debug", CONTROL_DEBUG, TRUE },
80a47a2c 710#ifndef DISABLE_DKIM
3c8b3577 711 { US"dkim_disable_verify", CONTROL_DKIM_VERIFY, FALSE },
f7572e5a 712#endif
4840604e 713#ifdef EXPERIMENTAL_DMARC
3c8b3577
JH
714 { US"dmarc_disable_verify", CONTROL_DMARC_VERIFY, FALSE },
715 { US"dmarc_enable_forensic", CONTROL_DMARC_FORENSIC, FALSE },
4840604e 716#endif
3c8b3577
JH
717 { US"dscp", CONTROL_DSCP, TRUE },
718 { US"caseful_local_part", CONTROL_CASEFUL_LOCAL_PART, FALSE },
719 { US"caselower_local_part", CONTROL_CASELOWER_LOCAL_PART, FALSE },
720 { US"enforce_sync", CONTROL_ENFORCE_SYNC, FALSE },
721 { US"freeze", CONTROL_FREEZE, TRUE },
722 { US"no_callout_flush", CONTROL_NO_CALLOUT_FLUSH, FALSE },
723 { US"no_delay_flush", CONTROL_NO_DELAY_FLUSH, FALSE },
724 { US"no_enforce_sync", CONTROL_NO_ENFORCE_SYNC, FALSE },
725 { US"no_multiline_responses", CONTROL_NO_MULTILINE, FALSE },
726 { US"no_pipelining", CONTROL_NO_PIPELINING, FALSE },
727 { US"queue_only", CONTROL_QUEUE_ONLY, FALSE },
8523533c 728#ifdef WITH_CONTENT_SCAN
3c8b3577 729 { US"no_mbox_unspool", CONTROL_NO_MBOX_UNSPOOL, FALSE },
8523533c 730#endif
3c8b3577
JH
731 { US"fakedefer", CONTROL_FAKEDEFER, TRUE },
732 { US"fakereject", CONTROL_FAKEREJECT, TRUE },
733 { US"submission", CONTROL_SUBMISSION, TRUE },
e4bdf652 734 { US"suppress_local_fixups", CONTROL_SUPPRESS_LOCAL_FIXUPS, FALSE },
3c8b3577 735 { US"cutthrough_delivery", CONTROL_CUTTHROUGH_DELIVERY, FALSE },
8c5d388a 736#ifdef SUPPORT_I18N
3c8b3577
JH
737 { US"utf8_downconvert", CONTROL_UTF8_DOWNCONVERT, TRUE }
738#endif
059ec3d9
PH
739 };
740
e5a9dba6
PH
741/* Support data structures for Client SMTP Authorization. acl_verify_csa()
742caches its result in a tree to avoid repeated DNS queries. The result is an
743integer code which is used as an index into the following tables of
744explanatory strings and verification return codes. */
745
746static tree_node *csa_cache = NULL;
747
748enum { CSA_UNKNOWN, CSA_OK, CSA_DEFER_SRV, CSA_DEFER_ADDR,
749 CSA_FAIL_EXPLICIT, CSA_FAIL_DOMAIN, CSA_FAIL_NOADDR, CSA_FAIL_MISMATCH };
750
751/* The acl_verify_csa() return code is translated into an acl_verify() return
752code using the following table. It is OK unless the client is definitely not
753authorized. This is because CSA is supposed to be optional for sending sites,
754so recipients should not be too strict about checking it - especially because
755DNS problems are quite likely to occur. It's possible to use $csa_status in
756further ACL conditions to distinguish ok, unknown, and defer if required, but
757the aim is to make the usual configuration simple. */
758
759static int csa_return_code[] = {
760 OK, OK, OK, OK,
761 FAIL, FAIL, FAIL, FAIL
762};
763
764static uschar *csa_status_string[] = {
765 US"unknown", US"ok", US"defer", US"defer",
766 US"fail", US"fail", US"fail", US"fail"
767};
768
769static uschar *csa_reason_string[] = {
770 US"unknown",
771 US"ok",
772 US"deferred (SRV lookup failed)",
773 US"deferred (target address lookup failed)",
774 US"failed (explicit authorization required)",
775 US"failed (host name not authorized)",
776 US"failed (no authorized addresses)",
777 US"failed (client address mismatch)"
778};
779
c99ce5c9
TF
780/* Options for the ratelimit condition. Note that there are two variants of
781the per_rcpt option, depending on the ACL that is used to measure the rate.
782However any ACL must be able to look up per_rcpt rates in /noupdate mode,
783so the two variants must have the same internal representation as well as
784the same configuration string. */
785
786enum {
787 RATE_PER_WHAT, RATE_PER_CLASH, RATE_PER_ADDR, RATE_PER_BYTE, RATE_PER_CMD,
788 RATE_PER_CONN, RATE_PER_MAIL, RATE_PER_RCPT, RATE_PER_ALLRCPTS
789};
790
791#define RATE_SET(var,new) \
792 (((var) == RATE_PER_WHAT) ? ((var) = RATE_##new) : ((var) = RATE_PER_CLASH))
793
794static uschar *ratelimit_option_string[] = {
795 US"?", US"!", US"per_addr", US"per_byte", US"per_cmd",
796 US"per_conn", US"per_mail", US"per_rcpt", US"per_rcpt"
797};
798
059ec3d9
PH
799/* Enable recursion between acl_check_internal() and acl_check_condition() */
800
55414b25 801static int acl_check_wargs(int, address_item *, const uschar *, int, uschar **,
f60d98e8 802 uschar **);
059ec3d9
PH
803
804
805/*************************************************
806* Pick out name from list *
807*************************************************/
808
809/* Use a binary chop method
810
811Arguments:
812 name name to find
813 list list of names
814 end size of list
815
816Returns: offset in list, or -1 if not found
817*/
818
819static int
820acl_checkname(uschar *name, uschar **list, int end)
821{
822int start = 0;
823
824while (start < end)
825 {
826 int mid = (start + end)/2;
827 int c = Ustrcmp(name, list[mid]);
828 if (c == 0) return mid;
829 if (c < 0) end = mid; else start = mid + 1;
830 }
831
832return -1;
833}
834
835
836/*************************************************
837* Read and parse one ACL *
838*************************************************/
839
840/* This function is called both from readconf in order to parse the ACLs in the
841configuration file, and also when an ACL is encountered dynamically (e.g. as
842the result of an expansion). It is given a function to call in order to
843retrieve the lines of the ACL. This function handles skipping comments and
844blank lines (where relevant).
845
846Arguments:
847 func function to get next line of ACL
848 error where to put an error message
849
850Returns: pointer to ACL, or NULL
851 NULL can be legal (empty ACL); in this case error will be NULL
852*/
853
854acl_block *
855acl_read(uschar *(*func)(void), uschar **error)
856{
857acl_block *yield = NULL;
858acl_block **lastp = &yield;
859acl_block *this = NULL;
860acl_condition_block *cond;
861acl_condition_block **condp = NULL;
862uschar *s;
863
864*error = NULL;
865
866while ((s = (*func)()) != NULL)
867 {
868 int v, c;
869 BOOL negated = FALSE;
870 uschar *saveline = s;
871 uschar name[64];
872
873 /* Conditions (but not verbs) are allowed to be negated by an initial
874 exclamation mark. */
875
876 while (isspace(*s)) s++;
877 if (*s == '!')
878 {
879 negated = TRUE;
880 s++;
881 }
882
cf00dad6
PH
883 /* Read the name of a verb or a condition, or the start of a new ACL, which
884 can be started by a name, or by a macro definition. */
059ec3d9
PH
885
886 s = readconf_readname(name, sizeof(name), s);
b8dc3e4a 887 if (*s == ':' || (isupper(name[0]) && *s == '=')) return yield;
059ec3d9
PH
888
889 /* If a verb is unrecognized, it may be another condition or modifier that
890 continues the previous verb. */
891
892 v = acl_checkname(name, verbs, sizeof(verbs)/sizeof(char *));
893 if (v < 0)
894 {
895 if (this == NULL)
896 {
4e167a8c
PH
897 *error = string_sprintf("unknown ACL verb \"%s\" in \"%s\"", name,
898 saveline);
059ec3d9
PH
899 return NULL;
900 }
901 }
902
903 /* New verb */
904
905 else
906 {
907 if (negated)
908 {
909 *error = string_sprintf("malformed ACL line \"%s\"", saveline);
910 return NULL;
911 }
912 this = store_get(sizeof(acl_block));
913 *lastp = this;
914 lastp = &(this->next);
915 this->next = NULL;
916 this->verb = v;
917 this->condition = NULL;
918 condp = &(this->condition);
919 if (*s == 0) continue; /* No condition on this line */
920 if (*s == '!')
921 {
922 negated = TRUE;
923 s++;
924 }
925 s = readconf_readname(name, sizeof(name), s); /* Condition name */
926 }
927
928 /* Handle a condition or modifier. */
929
930 c = acl_checkname(name, conditions, sizeof(conditions)/sizeof(char *));
931 if (c < 0)
932 {
933 *error = string_sprintf("unknown ACL condition/modifier in \"%s\"",
934 saveline);
935 return NULL;
936 }
937
938 /* The modifiers may not be negated */
939
940 if (negated && cond_modifiers[c])
941 {
942 *error = string_sprintf("ACL error: negation is not allowed with "
943 "\"%s\"", conditions[c]);
944 return NULL;
945 }
946
947 /* ENDPASS may occur only with ACCEPT or DISCARD. */
948
949 if (c == ACLC_ENDPASS &&
950 this->verb != ACL_ACCEPT &&
951 this->verb != ACL_DISCARD)
952 {
953 *error = string_sprintf("ACL error: \"%s\" is not allowed with \"%s\"",
954 conditions[c], verbs[this->verb]);
955 return NULL;
956 }
957
958 cond = store_get(sizeof(acl_condition_block));
959 cond->next = NULL;
960 cond->type = c;
961 cond->u.negated = negated;
962
963 *condp = cond;
964 condp = &(cond->next);
965
966 /* The "set" modifier is different in that its argument is "name=value"
967 rather than just a value, and we can check the validity of the name, which
38a0a95f
PH
968 gives us a variable name to insert into the data block. The original ACL
969 variable names were acl_c0 ... acl_c9 and acl_m0 ... acl_m9. This was
970 extended to 20 of each type, but after that people successfully argued for
641cb756
PH
971 arbitrary names. In the new scheme, the names must start with acl_c or acl_m.
972 After that, we allow alphanumerics and underscores, but the first character
973 after c or m must be a digit or an underscore. This retains backwards
974 compatibility. */
059ec3d9
PH
975
976 if (c == ACLC_SET)
977 {
47ca6d6c
PH
978 uschar *endptr;
979
38a0a95f
PH
980 if (Ustrncmp(s, "acl_c", 5) != 0 &&
981 Ustrncmp(s, "acl_m", 5) != 0)
47ca6d6c 982 {
38a0a95f
PH
983 *error = string_sprintf("invalid variable name after \"set\" in ACL "
984 "modifier \"set %s\" (must start \"acl_c\" or \"acl_m\")", s);
985 return NULL;
47ca6d6c 986 }
38a0a95f
PH
987
988 endptr = s + 5;
641cb756
PH
989 if (!isdigit(*endptr) && *endptr != '_')
990 {
991 *error = string_sprintf("invalid variable name after \"set\" in ACL "
992 "modifier \"set %s\" (digit or underscore must follow acl_c or acl_m)",
993 s);
994 return NULL;
995 }
996
38a0a95f 997 while (*endptr != 0 && *endptr != '=' && !isspace(*endptr))
47ca6d6c 998 {
38a0a95f
PH
999 if (!isalnum(*endptr) && *endptr != '_')
1000 {
1001 *error = string_sprintf("invalid character \"%c\" in variable name "
1002 "in ACL modifier \"set %s\"", *endptr, s);
1003 return NULL;
1004 }
1005 endptr++;
47ca6d6c 1006 }
47ca6d6c 1007
38a0a95f 1008 cond->u.varname = string_copyn(s + 4, endptr - s - 4);
47ca6d6c 1009 s = endptr;
059ec3d9
PH
1010 while (isspace(*s)) s++;
1011 }
1012
1013 /* For "set", we are now positioned for the data. For the others, only
1014 "endpass" has no data */
1015
1016 if (c != ACLC_ENDPASS)
1017 {
1018 if (*s++ != '=')
1019 {
1020 *error = string_sprintf("\"=\" missing after ACL \"%s\" %s", name,
1021 cond_modifiers[c]? US"modifier" : US"condition");
1022 return NULL;
1023 }
1024 while (isspace(*s)) s++;
1025 cond->arg = string_copy(s);
1026 }
1027 }
1028
1029return yield;
1030}
1031
1032
1033
1034/*************************************************
71fafd95
PH
1035* Set up added header line(s) *
1036*************************************************/
1037
1038/* This function is called by the add_header modifier, and also from acl_warn()
1039to implement the now-deprecated way of adding header lines using "message" on a
1040"warn" verb. The argument is treated as a sequence of header lines which are
1041added to a chain, provided there isn't an identical one already there.
1042
1043Argument: string of header lines
1044Returns: nothing
1045*/
1046
1047static void
55414b25 1048setup_header(const uschar *hstring)
71fafd95 1049{
55414b25 1050const uschar *p, *q;
71fafd95
PH
1051int hlen = Ustrlen(hstring);
1052
b1b05573
JH
1053/* Ignore any leading newlines */
1054while (*hstring == '\n') hstring++, hlen--;
71fafd95 1055
b1b05573 1056/* An empty string does nothing; ensure exactly one final newline. */
71fafd95 1057if (hlen <= 0) return;
96f5fe4c 1058if (hstring[--hlen] != '\n') /* no newline */
55414b25 1059 q = string_sprintf("%s\n", hstring);
96f5fe4c 1060else if (hstring[hlen-1] == '\n') /* double newline */
55414b25
JH
1061 {
1062 uschar * s = string_copy(hstring);
1063 while(s[--hlen] == '\n')
1064 s[hlen+1] = '\0';
1065 q = s;
1066 }
1067else
1068 q = hstring;
71fafd95
PH
1069
1070/* Loop for multiple header lines, taking care about continuations */
1071
55414b25 1072for (p = q; *p != 0; )
71fafd95 1073 {
55414b25
JH
1074 const uschar *s;
1075 uschar * hdr;
71fafd95
PH
1076 int newtype = htype_add_bot;
1077 header_line **hptr = &acl_added_headers;
1078
1079 /* Find next header line within the string */
1080
1081 for (;;)
1082 {
96f5fe4c 1083 q = Ustrchr(q, '\n'); /* we know there was a newline */
71fafd95
PH
1084 if (*(++q) != ' ' && *q != '\t') break;
1085 }
1086
1087 /* If the line starts with a colon, interpret the instruction for where to
1088 add it. This temporarily sets up a new type. */
1089
1090 if (*p == ':')
1091 {
1092 if (strncmpic(p, US":after_received:", 16) == 0)
1093 {
1094 newtype = htype_add_rec;
1095 p += 16;
1096 }
1097 else if (strncmpic(p, US":at_start_rfc:", 14) == 0)
1098 {
1099 newtype = htype_add_rfc;
1100 p += 14;
1101 }
1102 else if (strncmpic(p, US":at_start:", 10) == 0)
1103 {
1104 newtype = htype_add_top;
1105 p += 10;
1106 }
1107 else if (strncmpic(p, US":at_end:", 8) == 0)
1108 {
1109 newtype = htype_add_bot;
1110 p += 8;
1111 }
1112 while (*p == ' ' || *p == '\t') p++;
1113 }
1114
1115 /* See if this line starts with a header name, and if not, add X-ACL-Warn:
1116 to the front of it. */
1117
1118 for (s = p; s < q - 1; s++)
1119 {
1120 if (*s == ':' || !isgraph(*s)) break;
1121 }
1122
55414b25
JH
1123 hdr = string_sprintf("%s%.*s", (*s == ':')? "" : "X-ACL-Warn: ", (int) (q - p), p);
1124 hlen = Ustrlen(hdr);
71fafd95
PH
1125
1126 /* See if this line has already been added */
1127
1128 while (*hptr != NULL)
1129 {
55414b25 1130 if (Ustrncmp((*hptr)->text, hdr, hlen) == 0) break;
71fafd95
PH
1131 hptr = &((*hptr)->next);
1132 }
1133
1134 /* Add if not previously present */
1135
1136 if (*hptr == NULL)
1137 {
1138 header_line *h = store_get(sizeof(header_line));
55414b25 1139 h->text = hdr;
71fafd95
PH
1140 h->next = NULL;
1141 h->type = newtype;
1142 h->slen = hlen;
1143 *hptr = h;
1144 hptr = &(h->next);
1145 }
1146
1147 /* Advance for next header line within the string */
1148
1149 p = q;
1150 }
1151}
1152
1153
1154
e7568d51 1155/*************************************************
362145b5
JH
1156* List the added header lines *
1157*************************************************/
1158uschar *
1159fn_hdrs_added(void)
1160{
1161uschar * ret = NULL;
5f5be492
JH
1162int size = 0;
1163int ptr = 0;
362145b5
JH
1164header_line * h = acl_added_headers;
1165uschar * s;
1166uschar * cp;
362145b5
JH
1167
1168if (!h) return NULL;
1169
1170do
1171 {
1172 s = h->text;
1173 while ((cp = Ustrchr(s, '\n')) != NULL)
1174 {
1175 if (cp[1] == '\0') break;
1176
1177 /* contains embedded newline; needs doubling */
c2f669a4
JH
1178 ret = string_catn(ret, &size, &ptr, s, cp-s+1);
1179 ret = string_catn(ret, &size, &ptr, US"\n", 1);
362145b5
JH
1180 s = cp+1;
1181 }
1182 /* last bit of header */
1183
c2f669a4 1184 ret = string_catn(ret, &size, &ptr, s, cp-s+1); /* newline-sep list */
362145b5 1185 }
6d9cfc47 1186while((h = h->next));
362145b5
JH
1187
1188ret[ptr-1] = '\0'; /* overwrite last newline */
1189return ret;
1190}
1191
1192
1193/*************************************************
e7568d51
TL
1194* Set up removed header line(s) *
1195*************************************************/
1196
1197/* This function is called by the remove_header modifier. The argument is
1198treated as a sequence of header names which are added to a colon separated
1199list, provided there isn't an identical one already there.
1200
1201Argument: string of header names
1202Returns: nothing
1203*/
1204
1205static void
55414b25 1206setup_remove_header(const uschar *hnames)
e7568d51
TL
1207{
1208if (*hnames != 0)
55414b25
JH
1209 acl_removed_headers = acl_removed_headers
1210 ? string_sprintf("%s : %s", acl_removed_headers, hnames)
1211 : string_copy(hnames);
e7568d51
TL
1212}
1213
1214
71fafd95
PH
1215
1216/*************************************************
059ec3d9
PH
1217* Handle warnings *
1218*************************************************/
1219
1220/* This function is called when a WARN verb's conditions are true. It adds to
1221the message's headers, and/or writes information to the log. In each case, this
1222only happens once (per message for headers, per connection for log).
1223
71fafd95
PH
1224** NOTE: The header adding action using the "message" setting is historic, and
1225its use is now deprecated. The new add_header modifier should be used instead.
1226
059ec3d9
PH
1227Arguments:
1228 where ACL_WHERE_xxxx indicating which ACL this is
1229 user_message message for adding to headers
1230 log_message message for logging, if different
1231
1232Returns: nothing
1233*/
1234
1235static void
1236acl_warn(int where, uschar *user_message, uschar *log_message)
1237{
059ec3d9
PH
1238if (log_message != NULL && log_message != user_message)
1239 {
1240 uschar *text;
1241 string_item *logged;
1242
1243 text = string_sprintf("%s Warning: %s", host_and_ident(TRUE),
1244 string_printing(log_message));
1245
1246 /* If a sender verification has failed, and the log message is "sender verify
1247 failed", add the failure message. */
1248
1249 if (sender_verified_failed != NULL &&
1250 sender_verified_failed->message != NULL &&
1251 strcmpic(log_message, US"sender verify failed") == 0)
1252 text = string_sprintf("%s: %s", text, sender_verified_failed->message);
1253
9c7a242c
PH
1254 /* Search previously logged warnings. They are kept in malloc
1255 store so they can be freed at the start of a new message. */
059ec3d9
PH
1256
1257 for (logged = acl_warn_logged; logged != NULL; logged = logged->next)
1258 if (Ustrcmp(logged->text, text) == 0) break;
1259
1260 if (logged == NULL)
1261 {
1262 int length = Ustrlen(text) + 1;
1263 log_write(0, LOG_MAIN, "%s", text);
1264 logged = store_malloc(sizeof(string_item) + length);
1265 logged->text = (uschar *)logged + sizeof(string_item);
1266 memcpy(logged->text, text, length);
1267 logged->next = acl_warn_logged;
1268 acl_warn_logged = logged;
1269 }
1270 }
1271
1272/* If there's no user message, we are done. */
1273
1274if (user_message == NULL) return;
1275
1276/* If this isn't a message ACL, we can't do anything with a user message.
1277Log an error. */
1278
1279if (where > ACL_WHERE_NOTSMTP)
1280 {
1281 log_write(0, LOG_MAIN|LOG_PANIC, "ACL \"warn\" with \"message\" setting "
1282 "found in a non-message (%s) ACL: cannot specify header lines here: "
1283 "message ignored", acl_wherenames[where]);
1284 return;
1285 }
1286
71fafd95
PH
1287/* The code for setting up header lines is now abstracted into a separate
1288function so that it can be used for the add_header modifier as well. */
059ec3d9 1289
71fafd95 1290setup_header(user_message);
059ec3d9
PH
1291}
1292
1293
1294
1295/*************************************************
1296* Verify and check reverse DNS *
1297*************************************************/
1298
1299/* Called from acl_verify() below. We look up the host name(s) of the client IP
1300address if this has not yet been done. The host_name_lookup() function checks
1301that one of these names resolves to an address list that contains the client IP
1302address, so we don't actually have to do the check here.
1303
1304Arguments:
1305 user_msgptr pointer for user message
1306 log_msgptr pointer for log message
1307
1308Returns: OK verification condition succeeded
1309 FAIL verification failed
1310 DEFER there was a problem verifying
1311*/
1312
1313static int
1314acl_verify_reverse(uschar **user_msgptr, uschar **log_msgptr)
1315{
1316int rc;
1317
1318user_msgptr = user_msgptr; /* stop compiler warning */
1319
1320/* Previous success */
1321
1322if (sender_host_name != NULL) return OK;
1323
1324/* Previous failure */
1325
1326if (host_lookup_failed)
1327 {
1328 *log_msgptr = string_sprintf("host lookup failed%s", host_lookup_msg);
1329 return FAIL;
1330 }
1331
1332/* Need to do a lookup */
1333
1334HDEBUG(D_acl)
1335 debug_printf("looking up host name to force name/address consistency check\n");
1336
1337if ((rc = host_name_lookup()) != OK)
1338 {
1339 *log_msgptr = (rc == DEFER)?
1340 US"host lookup deferred for reverse lookup check"
1341 :
1342 string_sprintf("host lookup failed for reverse lookup check%s",
1343 host_lookup_msg);
1344 return rc; /* DEFER or FAIL */
1345 }
1346
1347host_build_sender_fullhost();
1348return OK;
1349}
1350
1351
1352
1353/*************************************************
e5a9dba6
PH
1354* Check client IP address matches CSA target *
1355*************************************************/
1356
1357/* Called from acl_verify_csa() below. This routine scans a section of a DNS
1358response for address records belonging to the CSA target hostname. The section
1359is specified by the reset argument, either RESET_ADDITIONAL or RESET_ANSWERS.
1360If one of the addresses matches the client's IP address, then the client is
1361authorized by CSA. If there are target IP addresses but none of them match
1362then the client is using an unauthorized IP address. If there are no target IP
1363addresses then the client cannot be using an authorized IP address. (This is
1364an odd configuration - why didn't the SRV record have a weight of 1 instead?)
1365
1366Arguments:
1367 dnsa the DNS answer block
1368 dnss a DNS scan block for us to use
1369 reset option specifing what portion to scan, as described above
1370 target the target hostname to use for matching RR names
1371
1372Returns: CSA_OK successfully authorized
1373 CSA_FAIL_MISMATCH addresses found but none matched
1374 CSA_FAIL_NOADDR no target addresses found
1375*/
1376
1377static int
1378acl_verify_csa_address(dns_answer *dnsa, dns_scan *dnss, int reset,
1379 uschar *target)
1380{
1381dns_record *rr;
1382dns_address *da;
1383
1384BOOL target_found = FALSE;
1385
1386for (rr = dns_next_rr(dnsa, dnss, reset);
1387 rr != NULL;
1388 rr = dns_next_rr(dnsa, dnss, RESET_NEXT))
1389 {
1390 /* Check this is an address RR for the target hostname. */
1391
1392 if (rr->type != T_A
1393 #if HAVE_IPV6
1394 && rr->type != T_AAAA
e5a9dba6
PH
1395 #endif
1396 ) continue;
1397
1398 if (strcmpic(target, rr->name) != 0) continue;
1399
1400 target_found = TRUE;
1401
1402 /* Turn the target address RR into a list of textual IP addresses and scan
1403 the list. There may be more than one if it is an A6 RR. */
1404
1405 for (da = dns_address_from_rr(dnsa, rr); da != NULL; da = da->next)
1406 {
1407 /* If the client IP address matches the target IP address, it's good! */
1408
1409 DEBUG(D_acl) debug_printf("CSA target address is %s\n", da->address);
1410
1411 if (strcmpic(sender_host_address, da->address) == 0) return CSA_OK;
1412 }
1413 }
1414
1415/* If we found some target addresses but none of them matched, the client is
1416using an unauthorized IP address, otherwise the target has no authorized IP
1417addresses. */
1418
1419if (target_found) return CSA_FAIL_MISMATCH;
1420else return CSA_FAIL_NOADDR;
1421}
1422
1423
1424
1425/*************************************************
1426* Verify Client SMTP Authorization *
1427*************************************************/
1428
1429/* Called from acl_verify() below. This routine calls dns_lookup_special()
1430to find the CSA SRV record corresponding to the domain argument, or
1431$sender_helo_name if no argument is provided. It then checks that the
1432client is authorized, and that its IP address corresponds to the SRV
1433target's address by calling acl_verify_csa_address() above. The address
1434should have been returned in the DNS response's ADDITIONAL section, but if
1435not we perform another DNS lookup to get it.
1436
1437Arguments:
1438 domain pointer to optional parameter following verify = csa
1439
1440Returns: CSA_UNKNOWN no valid CSA record found
1441 CSA_OK successfully authorized
1442 CSA_FAIL_* client is definitely not authorized
1443 CSA_DEFER_* there was a DNS problem
1444*/
1445
1446static int
55414b25 1447acl_verify_csa(const uschar *domain)
e5a9dba6
PH
1448{
1449tree_node *t;
55414b25
JH
1450const uschar *found;
1451uschar *p;
e5a9dba6
PH
1452int priority, weight, port;
1453dns_answer dnsa;
1454dns_scan dnss;
1455dns_record *rr;
1456int rc, type;
1457uschar target[256];
1458
1459/* Work out the domain we are using for the CSA lookup. The default is the
1460client's HELO domain. If the client has not said HELO, use its IP address
1461instead. If it's a local client (exim -bs), CSA isn't applicable. */
1462
1463while (isspace(*domain) && *domain != '\0') ++domain;
1464if (*domain == '\0') domain = sender_helo_name;
1465if (domain == NULL) domain = sender_host_address;
1466if (sender_host_address == NULL) return CSA_UNKNOWN;
1467
1468/* If we have an address literal, strip off the framing ready for turning it
1469into a domain. The framing consists of matched square brackets possibly
1470containing a keyword and a colon before the actual IP address. */
1471
1472if (domain[0] == '[')
1473 {
55414b25 1474 const uschar *start = Ustrchr(domain, ':');
e5a9dba6
PH
1475 if (start == NULL) start = domain;
1476 domain = string_copyn(start + 1, Ustrlen(start) - 2);
1477 }
1478
1479/* Turn domains that look like bare IP addresses into domains in the reverse
1480DNS. This code also deals with address literals and $sender_host_address. It's
1481not quite kosher to treat bare domains such as EHLO 192.0.2.57 the same as
1482address literals, but it's probably the most friendly thing to do. This is an
1483extension to CSA, so we allow it to be turned off for proper conformance. */
1484
7e66e54d 1485if (string_is_ip_address(domain, NULL) != 0)
e5a9dba6
PH
1486 {
1487 if (!dns_csa_use_reverse) return CSA_UNKNOWN;
1488 dns_build_reverse(domain, target);
1489 domain = target;
1490 }
1491
1492/* Find out if we've already done the CSA check for this domain. If we have,
1493return the same result again. Otherwise build a new cached result structure
1494for this domain. The name is filled in now, and the value is filled in when
1495we return from this function. */
1496
1497t = tree_search(csa_cache, domain);
1498if (t != NULL) return t->data.val;
1499
1500t = store_get_perm(sizeof(tree_node) + Ustrlen(domain));
1501Ustrcpy(t->name, domain);
1502(void)tree_insertnode(&csa_cache, t);
1503
1504/* Now we are ready to do the actual DNS lookup(s). */
1505
28e6ef29 1506found = domain;
e5a9dba6
PH
1507switch (dns_special_lookup(&dnsa, domain, T_CSA, &found))
1508 {
1509 /* If something bad happened (most commonly DNS_AGAIN), defer. */
1510
1511 default:
1512 return t->data.val = CSA_DEFER_SRV;
1513
1514 /* If we found nothing, the client's authorization is unknown. */
1515
1516 case DNS_NOMATCH:
1517 case DNS_NODATA:
1518 return t->data.val = CSA_UNKNOWN;
1519
1520 /* We got something! Go on to look at the reply in more detail. */
1521
1522 case DNS_SUCCEED:
1523 break;
1524 }
1525
1526/* Scan the reply for well-formed CSA SRV records. */
1527
1528for (rr = dns_next_rr(&dnsa, &dnss, RESET_ANSWERS);
1529 rr != NULL;
1530 rr = dns_next_rr(&dnsa, &dnss, RESET_NEXT))
1531 {
1532 if (rr->type != T_SRV) continue;
1533
1534 /* Extract the numerical SRV fields (p is incremented) */
1535
1536 p = rr->data;
1537 GETSHORT(priority, p);
1538 GETSHORT(weight, p);
1539 GETSHORT(port, p);
1540
1541 DEBUG(D_acl)
1542 debug_printf("CSA priority=%d weight=%d port=%d\n", priority, weight, port);
1543
1544 /* Check the CSA version number */
1545
1546 if (priority != 1) continue;
1547
1548 /* If the domain does not have a CSA SRV record of its own (i.e. the domain
1549 found by dns_special_lookup() is a parent of the one we asked for), we check
1550 the subdomain assertions in the port field. At the moment there's only one
1551 assertion: legitimate SMTP clients are all explicitly authorized with CSA
1552 SRV records of their own. */
1553
1dc92d5a 1554 if (Ustrcmp(found, domain) != 0)
e5a9dba6
PH
1555 {
1556 if (port & 1)
1557 return t->data.val = CSA_FAIL_EXPLICIT;
1558 else
1559 return t->data.val = CSA_UNKNOWN;
1560 }
1561
1562 /* This CSA SRV record refers directly to our domain, so we check the value
1563 in the weight field to work out the domain's authorization. 0 and 1 are
1564 unauthorized; 3 means the client is authorized but we can't check the IP
1565 address in order to authenticate it, so we treat it as unknown; values
1566 greater than 3 are undefined. */
1567
1568 if (weight < 2) return t->data.val = CSA_FAIL_DOMAIN;
1569
1570 if (weight > 2) continue;
1571
1572 /* Weight == 2, which means the domain is authorized. We must check that the
1573 client's IP address is listed as one of the SRV target addresses. Save the
1574 target hostname then break to scan the additional data for its addresses. */
1575
1576 (void)dn_expand(dnsa.answer, dnsa.answer + dnsa.answerlen, p,
1577 (DN_EXPAND_ARG4_TYPE)target, sizeof(target));
1578
1579 DEBUG(D_acl) debug_printf("CSA target is %s\n", target);
1580
1581 break;
1582 }
1583
1584/* If we didn't break the loop then no appropriate records were found. */
1585
1586if (rr == NULL) return t->data.val = CSA_UNKNOWN;
1587
1588/* Do not check addresses if the target is ".", in accordance with RFC 2782.
1589A target of "." indicates there are no valid addresses, so the client cannot
1590be authorized. (This is an odd configuration because weight=2 target=. is
1591equivalent to weight=1, but we check for it in order to keep load off the
1592root name servers.) Note that dn_expand() turns "." into "". */
1593
1594if (Ustrcmp(target, "") == 0) return t->data.val = CSA_FAIL_NOADDR;
1595
1596/* Scan the additional section of the CSA SRV reply for addresses belonging
1597to the target. If the name server didn't return any additional data (e.g.
1598because it does not fully support SRV records), we need to do another lookup
1599to obtain the target addresses; otherwise we have a definitive result. */
1600
1601rc = acl_verify_csa_address(&dnsa, &dnss, RESET_ADDITIONAL, target);
1602if (rc != CSA_FAIL_NOADDR) return t->data.val = rc;
1603
1604/* The DNS lookup type corresponds to the IP version used by the client. */
1605
1606#if HAVE_IPV6
1607if (Ustrchr(sender_host_address, ':') != NULL)
1608 type = T_AAAA;
1609else
1610#endif /* HAVE_IPV6 */
1611 type = T_A;
1612
1613
4e0983dc 1614lookup_dnssec_authenticated = NULL;
e5a9dba6
PH
1615switch (dns_lookup(&dnsa, target, type, NULL))
1616 {
1617 /* If something bad happened (most commonly DNS_AGAIN), defer. */
1618
1619 default:
cc00f4af 1620 return t->data.val = CSA_DEFER_ADDR;
e5a9dba6
PH
1621
1622 /* If the query succeeded, scan the addresses and return the result. */
1623
1624 case DNS_SUCCEED:
cc00f4af
JH
1625 rc = acl_verify_csa_address(&dnsa, &dnss, RESET_ANSWERS, target);
1626 if (rc != CSA_FAIL_NOADDR) return t->data.val = rc;
1627 /* else fall through */
e5a9dba6
PH
1628
1629 /* If the target has no IP addresses, the client cannot have an authorized
1630 IP address. However, if the target site uses A6 records (not AAAA records)
1631 we have to do yet another lookup in order to check them. */
1632
1633 case DNS_NOMATCH:
1634 case DNS_NODATA:
cc00f4af 1635 return t->data.val = CSA_FAIL_NOADDR;
e5a9dba6
PH
1636 }
1637}
1638
1639
1640
1641/*************************************************
059ec3d9
PH
1642* Handle verification (address & other) *
1643*************************************************/
1644
89583014 1645enum { VERIFY_REV_HOST_LKUP, VERIFY_CERT, VERIFY_HELO, VERIFY_CSA, VERIFY_HDR_SYNTAX,
770747fd
MFM
1646 VERIFY_NOT_BLIND, VERIFY_HDR_SNDR, VERIFY_SNDR, VERIFY_RCPT,
1647 VERIFY_HDR_NAMES_ASCII
89583014
JH
1648 };
1649typedef struct {
1650 uschar * name;
1651 int value;
1652 unsigned where_allowed; /* bitmap */
1653 BOOL no_options; /* Never has /option(s) following */
1654 unsigned alt_opt_sep; /* >0 Non-/ option separator (custom parser) */
1655 } verify_type_t;
1656static verify_type_t verify_type_list[] = {
7e8360e6 1657 { US"reverse_host_lookup", VERIFY_REV_HOST_LKUP, ~0, FALSE, 0 },
89583014
JH
1658 { US"certificate", VERIFY_CERT, ~0, TRUE, 0 },
1659 { US"helo", VERIFY_HELO, ~0, TRUE, 0 },
1660 { US"csa", VERIFY_CSA, ~0, FALSE, 0 },
1661 { US"header_syntax", VERIFY_HDR_SYNTAX, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), TRUE, 0 },
1662 { US"not_blind", VERIFY_NOT_BLIND, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), TRUE, 0 },
1663 { US"header_sender", VERIFY_HDR_SNDR, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), FALSE, 0 },
1664 { US"sender", VERIFY_SNDR, (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)
1665 |(1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP),
1666 FALSE, 6 },
770747fd
MFM
1667 { US"recipient", VERIFY_RCPT, (1<<ACL_WHERE_RCPT), FALSE, 0 },
1668 { US"header_names_ascii", VERIFY_HDR_NAMES_ASCII, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), TRUE, 0 }
89583014
JH
1669 };
1670
1671
1672enum { CALLOUT_DEFER_OK, CALLOUT_NOCACHE, CALLOUT_RANDOM, CALLOUT_USE_SENDER,
1673 CALLOUT_USE_POSTMASTER, CALLOUT_POSTMASTER, CALLOUT_FULLPOSTMASTER,
1674 CALLOUT_MAILFROM, CALLOUT_POSTMASTER_MAILFROM, CALLOUT_MAXWAIT, CALLOUT_CONNECT,
1675 CALLOUT_TIME
1676 };
1677typedef struct {
1678 uschar * name;
1679 int value;
1680 int flag;
1681 BOOL has_option; /* Has =option(s) following */
1682 BOOL timeval; /* Has a time value */
1683 } callout_opt_t;
1684static callout_opt_t callout_opt_list[] = {
1685 { US"defer_ok", CALLOUT_DEFER_OK, 0, FALSE, FALSE },
1686 { US"no_cache", CALLOUT_NOCACHE, vopt_callout_no_cache, FALSE, FALSE },
1687 { US"random", CALLOUT_RANDOM, vopt_callout_random, FALSE, FALSE },
1688 { US"use_sender", CALLOUT_USE_SENDER, vopt_callout_recipsender, FALSE, FALSE },
1689 { US"use_postmaster", CALLOUT_USE_POSTMASTER,vopt_callout_recippmaster, FALSE, FALSE },
1690 { US"postmaster_mailfrom",CALLOUT_POSTMASTER_MAILFROM,0, TRUE, FALSE },
1691 { US"postmaster", CALLOUT_POSTMASTER, 0, FALSE, FALSE },
1692 { US"fullpostmaster", CALLOUT_FULLPOSTMASTER,vopt_callout_fullpm, FALSE, FALSE },
1693 { US"mailfrom", CALLOUT_MAILFROM, 0, TRUE, FALSE },
1694 { US"maxwait", CALLOUT_MAXWAIT, 0, TRUE, TRUE },
1695 { US"connect", CALLOUT_CONNECT, 0, TRUE, TRUE },
1696 { NULL, CALLOUT_TIME, 0, FALSE, TRUE }
1697 };
1698
1699
1700
059ec3d9
PH
1701/* This function implements the "verify" condition. It is called when
1702encountered in any ACL, because some tests are almost always permitted. Some
1703just don't make sense, and always fail (for example, an attempt to test a host
1704lookup for a non-TCP/IP message). Others are restricted to certain ACLs.
1705
1706Arguments:
1707 where where called from
1708 addr the recipient address that the ACL is handling, or NULL
1709 arg the argument of "verify"
1710 user_msgptr pointer for user message
1711 log_msgptr pointer for log message
1712 basic_errno where to put verify errno
1713
1714Returns: OK verification condition succeeded
1715 FAIL verification failed
1716 DEFER there was a problem verifying
1717 ERROR syntax error
1718*/
1719
1720static int
55414b25 1721acl_verify(int where, address_item *addr, const uschar *arg,
059ec3d9
PH
1722 uschar **user_msgptr, uschar **log_msgptr, int *basic_errno)
1723{
1724int sep = '/';
1725int callout = -1;
1726int callout_overall = -1;
4deaf07d 1727int callout_connect = -1;
059ec3d9
PH
1728int verify_options = 0;
1729int rc;
1730BOOL verify_header_sender = FALSE;
1731BOOL defer_ok = FALSE;
1732BOOL callout_defer_ok = FALSE;
1733BOOL no_details = FALSE;
eafd343b 1734BOOL success_on_redirect = FALSE;
059ec3d9
PH
1735address_item *sender_vaddr = NULL;
1736uschar *verify_sender_address = NULL;
1737uschar *pm_mailfrom = NULL;
1738uschar *se_mailfrom = NULL;
596875b3
PH
1739
1740/* Some of the verify items have slash-separated options; some do not. Diagnose
89583014 1741an error if options are given for items that don't expect them.
596875b3
PH
1742*/
1743
1744uschar *slash = Ustrchr(arg, '/');
55414b25 1745const uschar *list = arg;
059ec3d9 1746uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
89583014 1747verify_type_t * vp;
059ec3d9
PH
1748
1749if (ss == NULL) goto BAD_VERIFY;
1750
1751/* Handle name/address consistency verification in a separate function. */
1752
89583014
JH
1753for (vp= verify_type_list;
1754 (char *)vp < (char *)verify_type_list + sizeof(verify_type_list);
1755 vp++
1756 )
1757 if (vp->alt_opt_sep ? strncmpic(ss, vp->name, vp->alt_opt_sep) == 0
1758 : strcmpic (ss, vp->name) == 0)
1759 break;
1760if ((char *)vp >= (char *)verify_type_list + sizeof(verify_type_list))
1761 goto BAD_VERIFY;
1762
1763if (vp->no_options && slash != NULL)
059ec3d9 1764 {
89583014
JH
1765 *log_msgptr = string_sprintf("unexpected '/' found in \"%s\" "
1766 "(this verify item has no options)", arg);
1767 return ERROR;
059ec3d9 1768 }
89583014 1769if (!(vp->where_allowed & (1<<where)))
059ec3d9 1770 {
89583014
JH
1771 *log_msgptr = string_sprintf("cannot verify %s in ACL for %s", vp->name, acl_wherenames[where]);
1772 return ERROR;
059ec3d9 1773 }
89583014 1774switch(vp->value)
596875b3 1775 {
89583014
JH
1776 case VERIFY_REV_HOST_LKUP:
1777 if (sender_host_address == NULL) return OK;
7e8360e6
JH
1778 if ((rc = acl_verify_reverse(user_msgptr, log_msgptr)) == DEFER)
1779 while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
1780 if (strcmpic(ss, US"defer_ok") == 0)
1781 return OK;
1782 return rc;
059ec3d9 1783
89583014
JH
1784 case VERIFY_CERT:
1785 /* TLS certificate verification is done at STARTTLS time; here we just
1786 test whether it was successful or not. (This is for optional verification; for
1787 mandatory verification, the connection doesn't last this long.) */
e5a9dba6 1788
3703d818
JH
1789 if (tls_in.certificate_verified) return OK;
1790 *user_msgptr = US"no verified certificate";
1791 return FAIL;
e5a9dba6 1792
89583014
JH
1793 case VERIFY_HELO:
1794 /* We can test the result of optional HELO verification that might have
1795 occurred earlier. If not, we can attempt the verification now. */
059ec3d9 1796
3703d818
JH
1797 if (!helo_verified && !helo_verify_failed) smtp_verify_helo();
1798 return helo_verified? OK : FAIL;
059ec3d9 1799
89583014
JH
1800 case VERIFY_CSA:
1801 /* Do Client SMTP Authorization checks in a separate function, and turn the
1802 result code into user-friendly strings. */
1c41c9cc 1803
3703d818
JH
1804 rc = acl_verify_csa(list);
1805 *log_msgptr = *user_msgptr = string_sprintf("client SMTP authorization %s",
89583014 1806 csa_reason_string[rc]);
3703d818
JH
1807 csa_status = csa_status_string[rc];
1808 DEBUG(D_acl) debug_printf("CSA result %s\n", csa_status);
1809 return csa_return_code[rc];
89583014
JH
1810
1811 case VERIFY_HDR_SYNTAX:
1812 /* Check that all relevant header lines have the correct syntax. If there is
1813 a syntax error, we return details of the error to the sender if configured to
1814 send out full details. (But a "message" setting on the ACL can override, as
1815 always). */
1816
1817 rc = verify_check_headers(log_msgptr);
3703d818
JH
1818 if (rc != OK && *log_msgptr)
1819 if (smtp_return_error_details)
1820 *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
1821 else
1822 acl_verify_message = *log_msgptr;
89583014 1823 return rc;
059ec3d9 1824
770747fd
MFM
1825 case VERIFY_HDR_NAMES_ASCII:
1826 /* Check that all header names are true 7 bit strings
1827 See RFC 5322, 2.2. and RFC 6532, 3. */
1828
1829 rc = verify_check_header_names_ascii(log_msgptr);
1830 if (rc != OK && smtp_return_error_details && *log_msgptr != NULL)
1831 *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
1832 return rc;
1833
89583014
JH
1834 case VERIFY_NOT_BLIND:
1835 /* Check that no recipient of this message is "blind", that is, every envelope
1836 recipient must be mentioned in either To: or Cc:. */
059ec3d9 1837
89583014
JH
1838 rc = verify_check_notblind();
1839 if (rc != OK)
1840 {
1841 *log_msgptr = string_sprintf("bcc recipient detected");
1842 if (smtp_return_error_details)
1843 *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
1844 }
1845 return rc;
059ec3d9 1846
89583014
JH
1847 /* The remaining verification tests check recipient and sender addresses,
1848 either from the envelope or from the header. There are a number of
1849 slash-separated options that are common to all of them. */
059ec3d9 1850
89583014
JH
1851 case VERIFY_HDR_SNDR:
1852 verify_header_sender = TRUE;
1853 break;
059ec3d9 1854
89583014
JH
1855 case VERIFY_SNDR:
1856 /* In the case of a sender, this can optionally be followed by an address to use
1857 in place of the actual sender (rare special-case requirement). */
059ec3d9 1858 {
89583014
JH
1859 uschar *s = ss + 6;
1860 if (*s == 0)
1861 verify_sender_address = sender_address;
1862 else
1863 {
1864 while (isspace(*s)) s++;
1865 if (*s++ != '=') goto BAD_VERIFY;
1866 while (isspace(*s)) s++;
1867 verify_sender_address = string_copy(s);
1868 }
059ec3d9 1869 }
89583014
JH
1870 break;
1871
1872 case VERIFY_RCPT:
1873 break;
059ec3d9
PH
1874 }
1875
89583014
JH
1876
1877
596875b3
PH
1878/* Remaining items are optional; they apply to sender and recipient
1879verification, including "header sender" verification. */
059ec3d9
PH
1880
1881while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size))
1882 != NULL)
1883 {
1884 if (strcmpic(ss, US"defer_ok") == 0) defer_ok = TRUE;
1885 else if (strcmpic(ss, US"no_details") == 0) no_details = TRUE;
eafd343b 1886 else if (strcmpic(ss, US"success_on_redirect") == 0) success_on_redirect = TRUE;
059ec3d9
PH
1887
1888 /* These two old options are left for backwards compatibility */
1889
1890 else if (strcmpic(ss, US"callout_defer_ok") == 0)
1891 {
1892 callout_defer_ok = TRUE;
1893 if (callout == -1) callout = CALLOUT_TIMEOUT_DEFAULT;
1894 }
1895
1896 else if (strcmpic(ss, US"check_postmaster") == 0)
1897 {
1898 pm_mailfrom = US"";
1899 if (callout == -1) callout = CALLOUT_TIMEOUT_DEFAULT;
1900 }
1901
1902 /* The callout option has a number of sub-options, comma separated */
1903
1904 else if (strncmpic(ss, US"callout", 7) == 0)
1905 {
1906 callout = CALLOUT_TIMEOUT_DEFAULT;
1907 ss += 7;
1908 if (*ss != 0)
1909 {
1910 while (isspace(*ss)) ss++;
1911 if (*ss++ == '=')
1912 {
55414b25 1913 const uschar * sublist = ss;
059ec3d9
PH
1914 int optsep = ',';
1915 uschar *opt;
1916 uschar buffer[256];
55414b25 1917 while (isspace(*sublist)) sublist++;
8e669ac1 1918
55414b25 1919 while ((opt = string_nextinlist(&sublist, &optsep, buffer, sizeof(buffer)))
059ec3d9
PH
1920 != NULL)
1921 {
89583014 1922 callout_opt_t * op;
438257ba 1923 double period = 1.0F;
059ec3d9 1924
89583014 1925 for (op= callout_opt_list; op->name; op++)
438257ba 1926 if (strncmpic(opt, op->name, Ustrlen(op->name)) == 0)
89583014 1927 break;
059ec3d9 1928
89583014
JH
1929 verify_options |= op->flag;
1930 if (op->has_option)
1931 {
438257ba 1932 opt += Ustrlen(op->name);
4deaf07d
PH
1933 while (isspace(*opt)) opt++;
1934 if (*opt++ != '=')
1935 {
1936 *log_msgptr = string_sprintf("'=' expected after "
89583014 1937 "\"%s\" in ACL verify condition \"%s\"", op->name, arg);
4deaf07d
PH
1938 return ERROR;
1939 }
1940 while (isspace(*opt)) opt++;
89583014
JH
1941 }
1942 if (op->timeval)
1943 {
1944 period = readconf_readtime(opt, 0, FALSE);
1945 if (period < 0)
4deaf07d
PH
1946 {
1947 *log_msgptr = string_sprintf("bad time value in ACL condition "
1948 "\"verify %s\"", arg);
1949 return ERROR;
1950 }
89583014
JH
1951 }
1952
1953 switch(op->value)
1954 {
1955 case CALLOUT_DEFER_OK: callout_defer_ok = TRUE; break;
1956 case CALLOUT_POSTMASTER: pm_mailfrom = US""; break;
1957 case CALLOUT_FULLPOSTMASTER: pm_mailfrom = US""; break;
1958 case CALLOUT_MAILFROM:
1959 if (!verify_header_sender)
1960 {
1961 *log_msgptr = string_sprintf("\"mailfrom\" is allowed as a "
1962 "callout option only for verify=header_sender (detected in ACL "
1963 "condition \"%s\")", arg);
1964 return ERROR;
1965 }
1966 se_mailfrom = string_copy(opt);
1967 break;
1968 case CALLOUT_POSTMASTER_MAILFROM: pm_mailfrom = string_copy(opt); break;
1969 case CALLOUT_MAXWAIT: callout_overall = period; break;
1970 case CALLOUT_CONNECT: callout_connect = period; break;
1971 case CALLOUT_TIME: callout = period; break;
1972 }
059ec3d9
PH
1973 }
1974 }
1975 else
1976 {
1977 *log_msgptr = string_sprintf("'=' expected after \"callout\" in "
1978 "ACL condition \"%s\"", arg);
1979 return ERROR;
1980 }
1981 }
1982 }
1983
1984 /* Option not recognized */
1985
1986 else
1987 {
1988 *log_msgptr = string_sprintf("unknown option \"%s\" in ACL "
1989 "condition \"verify %s\"", ss, arg);
1990 return ERROR;
1991 }
1992 }
1993
1994if ((verify_options & (vopt_callout_recipsender|vopt_callout_recippmaster)) ==
1995 (vopt_callout_recipsender|vopt_callout_recippmaster))
1996 {
1997 *log_msgptr = US"only one of use_sender and use_postmaster can be set "
1998 "for a recipient callout";
1999 return ERROR;
2000 }
2001
2002/* Handle sender-in-header verification. Default the user message to the log
2003message if giving out verification details. */
2004
2005if (verify_header_sender)
2006 {
8e669ac1 2007 int verrno;
059ec3d9 2008 rc = verify_check_header_address(user_msgptr, log_msgptr, callout,
fe5b5d0b
PH
2009 callout_overall, callout_connect, se_mailfrom, pm_mailfrom, verify_options,
2010 &verrno);
2011 if (rc != OK)
8e669ac1 2012 {
fe5b5d0b
PH
2013 *basic_errno = verrno;
2014 if (smtp_return_error_details)
2015 {
2016 if (*user_msgptr == NULL && *log_msgptr != NULL)
2017 *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
2018 if (rc == DEFER) acl_temp_details = TRUE;
2019 }
8e669ac1 2020 }
059ec3d9
PH
2021 }
2022
2023/* Handle a sender address. The default is to verify *the* sender address, but
2024optionally a different address can be given, for special requirements. If the
2025address is empty, we are dealing with a bounce message that has no sender, so
2026we cannot do any checking. If the real sender address gets rewritten during
2027verification (e.g. DNS widening), set the flag to stop it being rewritten again
2028during message reception.
2029
2030A list of verified "sender" addresses is kept to try to avoid doing to much
2031work repetitively when there are multiple recipients in a message and they all
2032require sender verification. However, when callouts are involved, it gets too
2033complicated because different recipients may require different callout options.
2034Therefore, we always do a full sender verify when any kind of callout is
2035specified. Caching elsewhere, for instance in the DNS resolver and in the
2036callout handling, should ensure that this is not terribly inefficient. */
2037
2038else if (verify_sender_address != NULL)
2039 {
2040 if ((verify_options & (vopt_callout_recipsender|vopt_callout_recippmaster))
2041 != 0)
2042 {
2043 *log_msgptr = US"use_sender or use_postmaster cannot be used for a "
2044 "sender verify callout";
2045 return ERROR;
2046 }
2047
2048 sender_vaddr = verify_checked_sender(verify_sender_address);
2049 if (sender_vaddr != NULL && /* Previously checked */
2050 callout <= 0) /* No callout needed this time */
2051 {
2052 /* If the "routed" flag is set, it means that routing worked before, so
2053 this check can give OK (the saved return code value, if set, belongs to a
2054 callout that was done previously). If the "routed" flag is not set, routing
2055 must have failed, so we use the saved return code. */
2056
2057 if (testflag(sender_vaddr, af_verify_routed)) rc = OK; else
2058 {
2059 rc = sender_vaddr->special_action;
2060 *basic_errno = sender_vaddr->basic_errno;
2061 }
2062 HDEBUG(D_acl) debug_printf("using cached sender verify result\n");
2063 }
2064
2065 /* Do a new verification, and cache the result. The cache is used to avoid
2066 verifying the sender multiple times for multiple RCPTs when callouts are not
2067 specified (see comments above).
2068
2069 The cache is also used on failure to give details in response to the first
2070 RCPT that gets bounced for this reason. However, this can be suppressed by
2071 the no_details option, which sets the flag that says "this detail has already
2072 been sent". The cache normally contains just one address, but there may be
2073 more in esoteric circumstances. */
2074
2075 else
2076 {
2077 BOOL routed = TRUE;
2a3eea10 2078 uschar *save_address_data = deliver_address_data;
8e669ac1 2079
059ec3d9 2080 sender_vaddr = deliver_make_addr(verify_sender_address, TRUE);
8c5d388a 2081#ifdef SUPPORT_I18N
3c8b3577
JH
2082 if ((sender_vaddr->prop.utf8_msg = message_smtputf8))
2083 {
2084 sender_vaddr->prop.utf8_downcvt = message_utf8_downconvert == 1;
2085 sender_vaddr->prop.utf8_downcvt_maybe = message_utf8_downconvert == -1;
2086 }
f358d5e0 2087#endif
059ec3d9
PH
2088 if (no_details) setflag(sender_vaddr, af_sverify_told);
2089 if (verify_sender_address[0] != 0)
2090 {
2091 /* If this is the real sender address, save the unrewritten version
2092 for use later in receive. Otherwise, set a flag so that rewriting the
2093 sender in verify_address() does not update sender_address. */
2094
2095 if (verify_sender_address == sender_address)
2096 sender_address_unrewritten = sender_address;
2097 else
2098 verify_options |= vopt_fake_sender;
2099
eafd343b
TK
2100 if (success_on_redirect)
2101 verify_options |= vopt_success_on_redirect;
2102
059ec3d9
PH
2103 /* The recipient, qualify, and expn options are never set in
2104 verify_options. */
2105
2106 rc = verify_address(sender_vaddr, NULL, verify_options, callout,
4deaf07d 2107 callout_overall, callout_connect, se_mailfrom, pm_mailfrom, &routed);
059ec3d9
PH
2108
2109 HDEBUG(D_acl) debug_printf("----------- end verify ------------\n");
2110
2111 if (rc == OK)
2112 {
2113 if (Ustrcmp(sender_vaddr->address, verify_sender_address) != 0)
2114 {
2115 DEBUG(D_acl) debug_printf("sender %s verified ok as %s\n",
2116 verify_sender_address, sender_vaddr->address);
2117 }
2118 else
2119 {
2120 DEBUG(D_acl) debug_printf("sender %s verified ok\n",
2121 verify_sender_address);
2122 }
2123 }
2124 else *basic_errno = sender_vaddr->basic_errno;
2125 }
2126 else rc = OK; /* Null sender */
2127
2128 /* Cache the result code */
2129
2130 if (routed) setflag(sender_vaddr, af_verify_routed);
2131 if (callout > 0) setflag(sender_vaddr, af_verify_callout);
2132 sender_vaddr->special_action = rc;
2133 sender_vaddr->next = sender_verified_list;
2134 sender_verified_list = sender_vaddr;
8e669ac1
PH
2135
2136 /* Restore the recipient address data, which might have been clobbered by
2a3eea10 2137 the sender verification. */
8e669ac1 2138
2a3eea10 2139 deliver_address_data = save_address_data;
059ec3d9 2140 }
8e669ac1 2141
2a3eea10
PH
2142 /* Put the sender address_data value into $sender_address_data */
2143
d43cbe25 2144 sender_address_data = sender_vaddr->prop.address_data;
059ec3d9
PH
2145 }
2146
2147/* A recipient address just gets a straightforward verify; again we must handle
2148the DEFER overrides. */
2149
2150else
2151 {
2152 address_item addr2;
2153
eafd343b
TK
2154 if (success_on_redirect)
2155 verify_options |= vopt_success_on_redirect;
2156
059ec3d9
PH
2157 /* We must use a copy of the address for verification, because it might
2158 get rewritten. */
2159
2160 addr2 = *addr;
2161 rc = verify_address(&addr2, NULL, verify_options|vopt_is_recipient, callout,
4deaf07d 2162 callout_overall, callout_connect, se_mailfrom, pm_mailfrom, NULL);
059ec3d9 2163 HDEBUG(D_acl) debug_printf("----------- end verify ------------\n");
8e669ac1 2164
42855d71 2165 *basic_errno = addr2.basic_errno;
059ec3d9 2166 *log_msgptr = addr2.message;
8e669ac1 2167 *user_msgptr = (addr2.user_message != NULL)?
6729cf78 2168 addr2.user_message : addr2.message;
42855d71
PH
2169
2170 /* Allow details for temporary error if the address is so flagged. */
2171 if (testflag((&addr2), af_pass_message)) acl_temp_details = TRUE;
059ec3d9
PH
2172
2173 /* Make $address_data visible */
d43cbe25 2174 deliver_address_data = addr2.prop.address_data;
059ec3d9
PH
2175 }
2176
2177/* We have a result from the relevant test. Handle defer overrides first. */
2178
2179if (rc == DEFER && (defer_ok ||
2180 (callout_defer_ok && *basic_errno == ERRNO_CALLOUTDEFER)))
2181 {
2182 HDEBUG(D_acl) debug_printf("verify defer overridden by %s\n",
2183 defer_ok? "defer_ok" : "callout_defer_ok");
2184 rc = OK;
2185 }
2186
2187/* If we've failed a sender, set up a recipient message, and point
2188sender_verified_failed to the address item that actually failed. */
2189
2190if (rc != OK && verify_sender_address != NULL)
2191 {
2192 if (rc != DEFER)
059ec3d9 2193 *log_msgptr = *user_msgptr = US"Sender verify failed";
059ec3d9 2194 else if (*basic_errno != ERRNO_CALLOUTDEFER)
059ec3d9 2195 *log_msgptr = *user_msgptr = US"Could not complete sender verify";
059ec3d9
PH
2196 else
2197 {
2198 *log_msgptr = US"Could not complete sender verify callout";
2199 *user_msgptr = smtp_return_error_details? sender_vaddr->user_message :
2200 *log_msgptr;
2201 }
2202
2203 sender_verified_failed = sender_vaddr;
2204 }
2205
2206/* Verifying an address messes up the values of $domain and $local_part,
2207so reset them before returning if this is a RCPT ACL. */
2208
2209if (addr != NULL)
2210 {
2211 deliver_domain = addr->domain;
2212 deliver_localpart = addr->local_part;
2213 }
2214return rc;
2215
2216/* Syntax errors in the verify argument come here. */
2217
2218BAD_VERIFY:
2219*log_msgptr = string_sprintf("expected \"sender[=address]\", \"recipient\", "
770747fd
MFM
2220 "\"helo\", \"header_syntax\", \"header_sender\", \"header_names_ascii\" "
2221 "or \"reverse_host_lookup\" at start of ACL condition "
059ec3d9
PH
2222 "\"verify %s\"", arg);
2223return ERROR;
2224}
2225
2226
2227
2228
2229/*************************************************
2230* Check argument for control= modifier *
2231*************************************************/
2232
2233/* Called from acl_check_condition() below
2234
2235Arguments:
2236 arg the argument string for control=
2237 pptr set to point to the terminating character
2238 where which ACL we are in
2239 log_msgptr for error messages
2240
2241Returns: CONTROL_xxx value
2242*/
2243
2244static int
55414b25 2245decode_control(const uschar *arg, const uschar **pptr, int where, uschar **log_msgptr)
059ec3d9
PH
2246{
2247int len;
2248control_def *d;
2249
2250for (d = controls_list;
2251 d < controls_list + sizeof(controls_list)/sizeof(control_def);
2252 d++)
2253 {
2254 len = Ustrlen(d->name);
2255 if (Ustrncmp(d->name, arg, len) == 0) break;
2256 }
2257
2258if (d >= controls_list + sizeof(controls_list)/sizeof(control_def) ||
2259 (arg[len] != 0 && (!d->has_option || arg[len] != '/')))
2260 {
2261 *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
2262 return CONTROL_ERROR;
2263 }
2264
059ec3d9
PH
2265*pptr = arg + len;
2266return d->value;
2267}
2268
2269
2270
c99ce5c9
TF
2271
2272/*************************************************
2273* Return a ratelimit error *
2274*************************************************/
2275
2276/* Called from acl_ratelimit() below
2277
2278Arguments:
2279 log_msgptr for error messages
2280 format format string
2281 ... supplementary arguments
2282 ss ratelimit option name
2283 where ACL_WHERE_xxxx indicating which ACL this is
2284
2285Returns: ERROR
2286*/
2287
2288static int
2289ratelimit_error(uschar **log_msgptr, const char *format, ...)
2290{
2291va_list ap;
2292uschar buffer[STRING_SPRINTF_BUFFER_SIZE];
2293va_start(ap, format);
2294if (!string_vformat(buffer, sizeof(buffer), format, ap))
2295 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
ef840681 2296 "string_sprintf expansion was longer than " SIZE_T_FMT, sizeof(buffer));
c99ce5c9
TF
2297va_end(ap);
2298*log_msgptr = string_sprintf(
2299 "error in arguments to \"ratelimit\" condition: %s", buffer);
2300return ERROR;
2301}
2302
2303
2304
2305
059ec3d9 2306/*************************************************
870f6ba8
TF
2307* Handle rate limiting *
2308*************************************************/
2309
2310/* Called by acl_check_condition() below to calculate the result
2311of the ACL ratelimit condition.
2312
2313Note that the return value might be slightly unexpected: if the
2314sender's rate is above the limit then the result is OK. This is
2315similar to the dnslists condition, and is so that you can write
2316ACL clauses like: defer ratelimit = 15 / 1h
2317
2318Arguments:
2319 arg the option string for ratelimit=
90fc3069 2320 where ACL_WHERE_xxxx indicating which ACL this is
870f6ba8
TF
2321 log_msgptr for error messages
2322
2323Returns: OK - Sender's rate is above limit
2324 FAIL - Sender's rate is below limit
2325 DEFER - Problem opening ratelimit database
2326 ERROR - Syntax error in options.
2327*/
2328
2329static int
55414b25 2330acl_ratelimit(const uschar *arg, int where, uschar **log_msgptr)
870f6ba8 2331{
c99ce5c9 2332double limit, period, count;
8f240103
PH
2333uschar *ss;
2334uschar *key = NULL;
c99ce5c9 2335uschar *unique = NULL;
870f6ba8 2336int sep = '/';
c99ce5c9
TF
2337BOOL leaky = FALSE, strict = FALSE, readonly = FALSE;
2338BOOL noupdate = FALSE, badacl = FALSE;
2339int mode = RATE_PER_WHAT;
870f6ba8
TF
2340int old_pool, rc;
2341tree_node **anchor, *t;
2342open_db dbblock, *dbm;
c99ce5c9 2343int dbdb_size;
870f6ba8 2344dbdata_ratelimit *dbd;
c99ce5c9 2345dbdata_ratelimit_unique *dbdb;
870f6ba8
TF
2346struct timeval tv;
2347
2348/* Parse the first two options and record their values in expansion
2349variables. These variables allow the configuration to have informative
2350error messages based on rate limits obtained from a table lookup. */
2351
c99ce5c9 2352/* First is the maximum number of messages per period / maximum burst
870f6ba8
TF
2353size, which must be greater than or equal to zero. Zero is useful for
2354rate measurement as opposed to rate limiting. */
2355
2356sender_rate_limit = string_nextinlist(&arg, &sep, NULL, 0);
2357if (sender_rate_limit == NULL)
96f5fe4c
JH
2358 return ratelimit_error(log_msgptr, "sender rate limit not set");
2359
2360limit = Ustrtod(sender_rate_limit, &ss);
2361if (tolower(*ss) == 'k') { limit *= 1024.0; ss++; }
2362else if (tolower(*ss) == 'm') { limit *= 1024.0*1024.0; ss++; }
2363else if (tolower(*ss) == 'g') { limit *= 1024.0*1024.0*1024.0; ss++; }
2364
c99ce5c9
TF
2365if (limit < 0.0 || *ss != '\0')
2366 return ratelimit_error(log_msgptr,
2367 "\"%s\" is not a positive number", sender_rate_limit);
870f6ba8 2368
c99ce5c9 2369/* Second is the rate measurement period / exponential smoothing time
870f6ba8
TF
2370constant. This must be strictly greater than zero, because zero leads to
2371run-time division errors. */
2372
2373sender_rate_period = string_nextinlist(&arg, &sep, NULL, 0);
2374if (sender_rate_period == NULL) period = -1.0;
2375else period = readconf_readtime(sender_rate_period, 0, FALSE);
2376if (period <= 0.0)
c99ce5c9
TF
2377 return ratelimit_error(log_msgptr,
2378 "\"%s\" is not a time value", sender_rate_period);
2379
2380/* By default we are counting one of something, but the per_rcpt,
2381per_byte, and count options can change this. */
2382
2383count = 1.0;
870f6ba8 2384
c99ce5c9 2385/* Parse the other options. */
870f6ba8
TF
2386
2387while ((ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size))
2388 != NULL)
2389 {
2390 if (strcmpic(ss, US"leaky") == 0) leaky = TRUE;
2391 else if (strcmpic(ss, US"strict") == 0) strict = TRUE;
8f240103 2392 else if (strcmpic(ss, US"noupdate") == 0) noupdate = TRUE;
c99ce5c9
TF
2393 else if (strcmpic(ss, US"readonly") == 0) readonly = TRUE;
2394 else if (strcmpic(ss, US"per_cmd") == 0) RATE_SET(mode, PER_CMD);
2395 else if (strcmpic(ss, US"per_conn") == 0)
2396 {
2397 RATE_SET(mode, PER_CONN);
2398 if (where == ACL_WHERE_NOTSMTP || where == ACL_WHERE_NOTSMTP_START)
2399 badacl = TRUE;
2400 }
2401 else if (strcmpic(ss, US"per_mail") == 0)
2402 {
2403 RATE_SET(mode, PER_MAIL);
2404 if (where > ACL_WHERE_NOTSMTP) badacl = TRUE;
2405 }
2406 else if (strcmpic(ss, US"per_rcpt") == 0)
2407 {
2408 /* If we are running in the RCPT ACL, then we'll count the recipients
2409 one by one, but if we are running when we have accumulated the whole
2410 list then we'll add them all in one batch. */
2411 if (where == ACL_WHERE_RCPT)
2412 RATE_SET(mode, PER_RCPT);
2413 else if (where >= ACL_WHERE_PREDATA && where <= ACL_WHERE_NOTSMTP)
2414 RATE_SET(mode, PER_ALLRCPTS), count = (double)recipients_count;
2415 else if (where == ACL_WHERE_MAIL || where > ACL_WHERE_NOTSMTP)
2416 RATE_SET(mode, PER_RCPT), badacl = TRUE;
2417 }
2418 else if (strcmpic(ss, US"per_byte") == 0)
2419 {
2420 /* If we have not yet received the message data and there was no SIZE
2421 declaration on the MAIL comand, then it's safe to just use a value of
2422 zero and let the recorded rate decay as if nothing happened. */
2423 RATE_SET(mode, PER_MAIL);
2424 if (where > ACL_WHERE_NOTSMTP) badacl = TRUE;
2425 else count = message_size < 0 ? 0.0 : (double)message_size;
2426 }
2427 else if (strcmpic(ss, US"per_addr") == 0)
2428 {
2429 RATE_SET(mode, PER_RCPT);
438257ba 2430 if (where != ACL_WHERE_RCPT) badacl = TRUE, unique = US"*";
c99ce5c9
TF
2431 else unique = string_sprintf("%s@%s", deliver_localpart, deliver_domain);
2432 }
2433 else if (strncmpic(ss, US"count=", 6) == 0)
2434 {
2435 uschar *e;
2436 count = Ustrtod(ss+6, &e);
2437 if (count < 0.0 || *e != '\0')
2438 return ratelimit_error(log_msgptr,
2439 "\"%s\" is not a positive number", ss);
2440 }
2441 else if (strncmpic(ss, US"unique=", 7) == 0)
2442 unique = string_copy(ss + 7);
2443 else if (key == NULL)
2444 key = string_copy(ss);
2445 else
2446 key = string_sprintf("%s/%s", key, ss);
870f6ba8
TF
2447 }
2448
c99ce5c9
TF
2449/* Sanity check. When the badacl flag is set the update mode must either
2450be readonly (which is the default if it is omitted) or, for backwards
2451compatibility, a combination of noupdate and strict or leaky. */
2452
2453if (mode == RATE_PER_CLASH)
2454 return ratelimit_error(log_msgptr, "conflicting per_* options");
2455if (leaky + strict + readonly > 1)
2456 return ratelimit_error(log_msgptr, "conflicting update modes");
2457if (badacl && (leaky || strict) && !noupdate)
2458 return ratelimit_error(log_msgptr,
2459 "\"%s\" must not have /leaky or /strict option in %s ACL",
2460 ratelimit_option_string[mode], acl_wherenames[where]);
2461
2462/* Set the default values of any unset options. In readonly mode we
2463perform the rate computation without any increment so that its value
2464decays to eventually allow over-limit senders through. */
2465
2466if (noupdate) readonly = TRUE, leaky = strict = FALSE;
2467if (badacl) readonly = TRUE;
2468if (readonly) count = 0.0;
2469if (!strict && !readonly) leaky = TRUE;
2470if (mode == RATE_PER_WHAT) mode = RATE_PER_MAIL;
870f6ba8 2471
8f240103
PH
2472/* Create the lookup key. If there is no explicit key, use sender_host_address.
2473If there is no sender_host_address (e.g. -bs or acl_not_smtp) then we simply
2474omit it. The smoothing constant (sender_rate_period) and the per_xxx options
2475are added to the key because they alter the meaning of the stored data. */
2476
2477if (key == NULL)
2478 key = (sender_host_address == NULL)? US"" : sender_host_address;
870f6ba8 2479
c99ce5c9 2480key = string_sprintf("%s/%s/%s%s",
8f240103 2481 sender_rate_period,
c99ce5c9
TF
2482 ratelimit_option_string[mode],
2483 unique == NULL ? "" : "unique/",
8f240103 2484 key);
870f6ba8 2485
c99ce5c9
TF
2486HDEBUG(D_acl)
2487 debug_printf("ratelimit condition count=%.0f %.1f/%s\n", count, limit, key);
870f6ba8 2488
8f240103
PH
2489/* See if we have already computed the rate by looking in the relevant tree.
2490For per-connection rate limiting, store tree nodes and dbdata in the permanent
c99ce5c9
TF
2491pool so that they survive across resets. In readonly mode we only remember the
2492result for the rest of this command in case a later command changes it. After
2493this bit of logic the code is independent of the per_* mode. */
870f6ba8 2494
870f6ba8
TF
2495old_pool = store_pool;
2496
c99ce5c9
TF
2497if (readonly)
2498 anchor = &ratelimiters_cmd;
2499else switch(mode) {
2500case RATE_PER_CONN:
870f6ba8
TF
2501 anchor = &ratelimiters_conn;
2502 store_pool = POOL_PERM;
c99ce5c9
TF
2503 break;
2504case RATE_PER_BYTE:
2505case RATE_PER_MAIL:
2506case RATE_PER_ALLRCPTS:
870f6ba8 2507 anchor = &ratelimiters_mail;
c99ce5c9
TF
2508 break;
2509case RATE_PER_ADDR:
2510case RATE_PER_CMD:
2511case RATE_PER_RCPT:
fe0dab11 2512 anchor = &ratelimiters_cmd;
c99ce5c9
TF
2513 break;
2514default:
3399bb60 2515 anchor = NULL; /* silence an "unused" complaint */
c99ce5c9
TF
2516 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
2517 "internal ACL error: unknown ratelimit mode %d", mode);
2518 break;
2519}
870f6ba8 2520
c99ce5c9
TF
2521t = tree_search(*anchor, key);
2522if (t != NULL)
870f6ba8
TF
2523 {
2524 dbd = t->data.ptr;
2525 /* The following few lines duplicate some of the code below. */
8f240103 2526 rc = (dbd->rate < limit)? FAIL : OK;
870f6ba8
TF
2527 store_pool = old_pool;
2528 sender_rate = string_sprintf("%.1f", dbd->rate);
2529 HDEBUG(D_acl)
2530 debug_printf("ratelimit found pre-computed rate %s\n", sender_rate);
2531 return rc;
2532 }
2533
c99ce5c9
TF
2534/* We aren't using a pre-computed rate, so get a previously recorded rate
2535from the database, which will be updated and written back if required. */
870f6ba8
TF
2536
2537dbm = dbfn_open(US"ratelimit", O_RDWR, &dbblock, TRUE);
2538if (dbm == NULL)
2539 {
2540 store_pool = old_pool;
2541 sender_rate = NULL;
2542 HDEBUG(D_acl) debug_printf("ratelimit database not available\n");
2543 *log_msgptr = US"ratelimit database not available";
2544 return DEFER;
2545 }
c99ce5c9
TF
2546dbdb = dbfn_read_with_length(dbm, key, &dbdb_size);
2547dbd = NULL;
870f6ba8
TF
2548
2549gettimeofday(&tv, NULL);
2550
c99ce5c9
TF
2551if (dbdb != NULL)
2552 {
2553 /* Locate the basic ratelimit block inside the DB data. */
2554 HDEBUG(D_acl) debug_printf("ratelimit found key in database\n");
2555 dbd = &dbdb->dbd;
2556
2557 /* Forget the old Bloom filter if it is too old, so that we count each
2558 repeating event once per period. We don't simply clear and re-use the old
2559 filter because we want its size to change if the limit changes. Note that
2560 we keep the dbd pointer for copying the rate into the new data block. */
2561
2562 if(unique != NULL && tv.tv_sec > dbdb->bloom_epoch + period)
2563 {
2564 HDEBUG(D_acl) debug_printf("ratelimit discarding old Bloom filter\n");
2565 dbdb = NULL;
2566 }
2567
2568 /* Sanity check. */
2569
2570 if(unique != NULL && dbdb_size < sizeof(*dbdb))
2571 {
2572 HDEBUG(D_acl) debug_printf("ratelimit discarding undersize Bloom filter\n");
2573 dbdb = NULL;
2574 }
2575 }
2576
2577/* Allocate a new data block if the database lookup failed
2578or the Bloom filter passed its age limit. */
2579
2580if (dbdb == NULL)
2581 {
2582 if (unique == NULL)
2583 {
2584 /* No Bloom filter. This basic ratelimit block is initialized below. */
2585 HDEBUG(D_acl) debug_printf("ratelimit creating new rate data block\n");
2586 dbdb_size = sizeof(*dbd);
2587 dbdb = store_get(dbdb_size);
2588 }
2589 else
2590 {
2591 int extra;
2592 HDEBUG(D_acl) debug_printf("ratelimit creating new Bloom filter\n");
2593
2594 /* See the long comment below for an explanation of the magic number 2.
2595 The filter has a minimum size in case the rate limit is very small;
2596 this is determined by the definition of dbdata_ratelimit_unique. */
2597
2598 extra = (int)limit * 2 - sizeof(dbdb->bloom);
2599 if (extra < 0) extra = 0;
2600 dbdb_size = sizeof(*dbdb) + extra;
2601 dbdb = store_get(dbdb_size);
2602 dbdb->bloom_epoch = tv.tv_sec;
2603 dbdb->bloom_size = sizeof(dbdb->bloom) + extra;
2604 memset(dbdb->bloom, 0, dbdb->bloom_size);
2605
2606 /* Preserve any basic ratelimit data (which is our longer-term memory)
2607 by copying it from the discarded block. */
2608
2609 if (dbd != NULL)
2610 {
2611 dbdb->dbd = *dbd;
2612 dbd = &dbdb->dbd;
2613 }
2614 }
2615 }
2616
2617/* If we are counting unique events, find out if this event is new or not.
2618If the client repeats the event during the current period then it should be
2619counted. We skip this code in readonly mode for efficiency, because any
2620changes to the filter will be discarded and because count is already set to
2621zero. */
2622
2623if (unique != NULL && !readonly)
2624 {
2625 /* We identify unique events using a Bloom filter. (You can find my
2626 notes on Bloom filters at http://fanf.livejournal.com/81696.html)
2627 With the per_addr option, an "event" is a recipient address, though the
2628 user can use the unique option to define their own events. We only count
2629 an event if we have not seen it before.
2630
2631 We size the filter according to the rate limit, which (in leaky mode)
2632 is the limit on the population of the filter. We allow 16 bits of space
2633 per entry (see the construction code above) and we set (up to) 8 of them
2634 when inserting an element (see the loop below). The probability of a false
2635 positive (an event we have not seen before but which we fail to count) is
2636
2637 size = limit * 16
2638 numhash = 8
2639 allzero = exp(-numhash * pop / size)
2640 = exp(-0.5 * pop / limit)
2641 fpr = pow(1 - allzero, numhash)
2642
2643 For senders at the limit the fpr is 0.06% or 1 in 1700
2644 and for senders at half the limit it is 0.0006% or 1 in 170000
2645
2646 In strict mode the Bloom filter can fill up beyond the normal limit, in
2647 which case the false positive rate will rise. This means that the
2648 measured rate for very fast senders can bogusly drop off after a while.
2649
2650 At twice the limit, the fpr is 2.5% or 1 in 40
2651 At four times the limit, it is 31% or 1 in 3.2
2652
2653 It takes ln(pop/limit) periods for an over-limit burst of pop events to
2654 decay below the limit, and if this is more than one then the Bloom filter
2655 will be discarded before the decay gets that far. The false positive rate
2656 at this threshold is 9.3% or 1 in 10.7. */
2657
2658 BOOL seen;
2659 unsigned n, hash, hinc;
2660 uschar md5sum[16];
2661 md5 md5info;
2662
2663 /* Instead of using eight independent hash values, we combine two values
2664 using the formula h1 + n * h2. This does not harm the Bloom filter's
2665 performance, and means the amount of hash we need is independent of the
2666 number of bits we set in the filter. */
2667
2668 md5_start(&md5info);
2669 md5_end(&md5info, unique, Ustrlen(unique), md5sum);
2670 hash = md5sum[0] | md5sum[1] << 8 | md5sum[2] << 16 | md5sum[3] << 24;
2671 hinc = md5sum[4] | md5sum[5] << 8 | md5sum[6] << 16 | md5sum[7] << 24;
2672
2673 /* Scan the bits corresponding to this event. A zero bit means we have
2674 not seen it before. Ensure all bits are set to record this event. */
2675
2676 HDEBUG(D_acl) debug_printf("ratelimit checking uniqueness of %s\n", unique);
2677
2678 seen = TRUE;
2679 for (n = 0; n < 8; n++, hash += hinc)
2680 {
2681 int bit = 1 << (hash % 8);
2682 int byte = (hash / 8) % dbdb->bloom_size;
2683 if ((dbdb->bloom[byte] & bit) == 0)
2684 {
2685 dbdb->bloom[byte] |= bit;
2686 seen = FALSE;
2687 }
2688 }
2689
2690 /* If this event has occurred before, do not count it. */
2691
2692 if (seen)
2693 {
2694 HDEBUG(D_acl) debug_printf("ratelimit event found in Bloom filter\n");
2695 count = 0.0;
2696 }
2697 else
2698 HDEBUG(D_acl) debug_printf("ratelimit event added to Bloom filter\n");
2699 }
2700
2701/* If there was no previous ratelimit data block for this key, initialize
2702the new one, otherwise update the block from the database. The initial rate
2703is what would be computed by the code below for an infinite interval. */
2704
870f6ba8
TF
2705if (dbd == NULL)
2706 {
c99ce5c9
TF
2707 HDEBUG(D_acl) debug_printf("ratelimit initializing new key's rate data\n");
2708 dbd = &dbdb->dbd;
870f6ba8
TF
2709 dbd->time_stamp = tv.tv_sec;
2710 dbd->time_usec = tv.tv_usec;
c99ce5c9 2711 dbd->rate = count;
870f6ba8
TF
2712 }
2713else
2714 {
2715 /* The smoothed rate is computed using an exponentially weighted moving
2716 average adjusted for variable sampling intervals. The standard EWMA for
2717 a fixed sampling interval is: f'(t) = (1 - a) * f(t) + a * f'(t - 1)
2718 where f() is the measured value and f'() is the smoothed value.
2719
2720 Old data decays out of the smoothed value exponentially, such that data n
2721 samples old is multiplied by a^n. The exponential decay time constant p
2722 is defined such that data p samples old is multiplied by 1/e, which means
2723 that a = exp(-1/p). We can maintain the same time constant for a variable
2724 sampling interval i by using a = exp(-i/p).
2725
2726 The rate we are measuring is messages per period, suitable for directly
2727 comparing with the limit. The average rate between now and the previous
2728 message is period / interval, which we feed into the EWMA as the sample.
2729
2730 It turns out that the number of messages required for the smoothed rate
2731 to reach the limit when they are sent in a burst is equal to the limit.
2732 This can be seen by analysing the value of the smoothed rate after N
2733 messages sent at even intervals. Let k = (1 - a) * p/i
2734
2735 rate_1 = (1 - a) * p/i + a * rate_0
2736 = k + a * rate_0
2737 rate_2 = k + a * rate_1
2738 = k + a * k + a^2 * rate_0
2739 rate_3 = k + a * k + a^2 * k + a^3 * rate_0
2740 rate_N = rate_0 * a^N + k * SUM(x=0..N-1)(a^x)
2741 = rate_0 * a^N + k * (1 - a^N) / (1 - a)
2742 = rate_0 * a^N + p/i * (1 - a^N)
2743
2744 When N is large, a^N -> 0 so rate_N -> p/i as desired.
2745
2746 rate_N = p/i + (rate_0 - p/i) * a^N
2747 a^N = (rate_N - p/i) / (rate_0 - p/i)
2748 N * -i/p = log((rate_N - p/i) / (rate_0 - p/i))
2749 N = p/i * log((rate_0 - p/i) / (rate_N - p/i))
2750
2751 Numerical analysis of the above equation, setting the computed rate to
2752 increase from rate_0 = 0 to rate_N = limit, shows that for large sending
2753 rates, p/i, the number of messages N = limit. So limit serves as both the
2754 maximum rate measured in messages per period, and the maximum number of
2755 messages that can be sent in a fast burst. */
2756
2757 double this_time = (double)tv.tv_sec
2758 + (double)tv.tv_usec / 1000000.0;
2759 double prev_time = (double)dbd->time_stamp
2760 + (double)dbd->time_usec / 1000000.0;
870f6ba8
TF
2761
2762 /* We must avoid division by zero, and deal gracefully with the clock going
2763 backwards. If we blunder ahead when time is in reverse then the computed
e5d5a95f 2764 rate will be bogus. To be safe we clamp interval to a very small number. */
870f6ba8 2765
e5d5a95f
TF
2766 double interval = this_time - prev_time <= 0.0 ? 1e-9
2767 : this_time - prev_time;
2768
2769 double i_over_p = interval / period;
2770 double a = exp(-i_over_p);
870f6ba8 2771
c99ce5c9
TF
2772 /* Combine the instantaneous rate (period / interval) with the previous rate
2773 using the smoothing factor a. In order to measure sized events, multiply the
2774 instantaneous rate by the count of bytes or recipients etc. */
2775
870f6ba8
TF
2776 dbd->time_stamp = tv.tv_sec;
2777 dbd->time_usec = tv.tv_usec;
c99ce5c9
TF
2778 dbd->rate = (1 - a) * count / i_over_p + a * dbd->rate;
2779
2780 /* When events are very widely spaced the computed rate tends towards zero.
2781 Although this is accurate it turns out not to be useful for our purposes,
2782 especially when the first event after a long silence is the start of a spam
2783 run. A more useful model is that the rate for an isolated event should be the
2784 size of the event per the period size, ignoring the lack of events outside
2785 the current period and regardless of where the event falls in the period. So,
2786 if the interval was so long that the calculated rate is unhelpfully small, we
2787 re-intialize the rate. In the absence of higher-rate bursts, the condition
2788 below is true if the interval is greater than the period. */
2789
2790 if (dbd->rate < count) dbd->rate = count;
870f6ba8
TF
2791 }
2792
c99ce5c9
TF
2793/* Clients sending at the limit are considered to be over the limit.
2794This matters for edge cases such as a limit of zero, when the client
2795should be completely blocked. */
3348576f 2796
8f240103 2797rc = (dbd->rate < limit)? FAIL : OK;
870f6ba8
TF
2798
2799/* Update the state if the rate is low or if we are being strict. If we
2800are in leaky mode and the sender's rate is too high, we do not update
2801the recorded rate in order to avoid an over-aggressive sender's retry
c99ce5c9
TF
2802rate preventing them from getting any email through. If readonly is set,
2803neither leaky nor strict are set, so we do not do any updates. */
870f6ba8 2804
c99ce5c9 2805if ((rc == FAIL && leaky) || strict)
8f240103 2806 {
c99ce5c9 2807 dbfn_write(dbm, key, dbdb, dbdb_size);
8f240103
PH
2808 HDEBUG(D_acl) debug_printf("ratelimit db updated\n");
2809 }
2810else
2811 {
2812 HDEBUG(D_acl) debug_printf("ratelimit db not updated: %s\n",
c99ce5c9 2813 readonly? "readonly mode" : "over the limit, but leaky");
8f240103
PH
2814 }
2815
870f6ba8
TF
2816dbfn_close(dbm);
2817
c99ce5c9 2818/* Store the result in the tree for future reference. */
870f6ba8 2819
c99ce5c9
TF
2820t = store_get(sizeof(tree_node) + Ustrlen(key));
2821t->data.ptr = dbd;
2822Ustrcpy(t->name, key);
2823(void)tree_insertnode(anchor, t);
870f6ba8
TF
2824
2825/* We create the formatted version of the sender's rate very late in
2826order to ensure that it is done using the correct storage pool. */
2827
2828store_pool = old_pool;
2829sender_rate = string_sprintf("%.1f", dbd->rate);
2830
2831HDEBUG(D_acl)
2832 debug_printf("ratelimit computed rate %s\n", sender_rate);
2833
2834return rc;
2835}
2836
2837
2838
2839/*************************************************
b0019c78
TF
2840* The udpsend ACL modifier *
2841*************************************************/
2842
2843/* Called by acl_check_condition() below.
2844
2845Arguments:
2846 arg the option string for udpsend=
2847 log_msgptr for error messages
2848
2849Returns: OK - Completed.
2850 DEFER - Problem with DNS lookup.
2851 ERROR - Syntax error in options.
2852*/
2853
2854static int
55414b25 2855acl_udpsend(const uschar *arg, uschar **log_msgptr)
b0019c78
TF
2856{
2857int sep = 0;
2858uschar *hostname;
2859uschar *portstr;
2860uschar *portend;
2861host_item *h;
2862int portnum;
b0019c78
TF
2863int len;
2864int r, s;
b1f8e4f8 2865uschar * errstr;
b0019c78
TF
2866
2867hostname = string_nextinlist(&arg, &sep, NULL, 0);
2868portstr = string_nextinlist(&arg, &sep, NULL, 0);
2869
2870if (hostname == NULL)
2871 {
217b0e56 2872 *log_msgptr = US"missing destination host in \"udpsend\" modifier";
b0019c78
TF
2873 return ERROR;
2874 }
2875if (portstr == NULL)
2876 {
217b0e56 2877 *log_msgptr = US"missing destination port in \"udpsend\" modifier";
b0019c78
TF
2878 return ERROR;
2879 }
2880if (arg == NULL)
2881 {
217b0e56 2882 *log_msgptr = US"missing datagram payload in \"udpsend\" modifier";
b0019c78
TF
2883 return ERROR;
2884 }
2885portnum = Ustrtol(portstr, &portend, 10);
2886if (*portend != '\0')
2887 {
217b0e56 2888 *log_msgptr = US"bad destination port in \"udpsend\" modifier";
b0019c78
TF
2889 return ERROR;
2890 }
2891
2892/* Make a single-item host list. */
2893h = store_get(sizeof(host_item));
2894memset(h, 0, sizeof(host_item));
2895h->name = hostname;
2896h->port = portnum;
2897h->mx = MX_NONE;
2898
2899if (string_is_ip_address(hostname, NULL))
2900 h->address = hostname, r = HOST_FOUND;
2901else
2902 r = host_find_byname(h, NULL, 0, NULL, FALSE);
2903if (r == HOST_FIND_FAILED || r == HOST_FIND_AGAIN)
2904 {
217b0e56 2905 *log_msgptr = US"DNS lookup failed in \"udpsend\" modifier";
b0019c78
TF
2906 return DEFER;
2907 }
2908
2909HDEBUG(D_acl)
2910 debug_printf("udpsend [%s]:%d %s\n", h->address, portnum, arg);
2911
b1f8e4f8
JH
2912r = s = ip_connectedsocket(SOCK_DGRAM, h->address, portnum, portnum,
2913 1, NULL, &errstr);
b0019c78 2914if (r < 0) goto defer;
27f9999e 2915len = Ustrlen(arg);
9cb1785a 2916r = send(s, arg, len, 0);
b1f8e4f8
JH
2917if (r < 0)
2918 {
2919 errstr = US strerror(errno);
2920 close(s);
2921 goto defer;
2922 }
2923close(s);
b0019c78
TF
2924if (r < len)
2925 {
2926 *log_msgptr =
2927 string_sprintf("\"udpsend\" truncated from %d to %d octets", len, r);
2928 return DEFER;
2929 }
2930
2931HDEBUG(D_acl)
2932 debug_printf("udpsend %d bytes\n", r);
2933
2934return OK;
2935
2936defer:
b1f8e4f8 2937*log_msgptr = string_sprintf("\"udpsend\" failed: %s", errstr);
b0019c78
TF
2938return DEFER;
2939}
2940
2941
2942
2943/*************************************************
059ec3d9
PH
2944* Handle conditions/modifiers on an ACL item *
2945*************************************************/
2946
2947/* Called from acl_check() below.
2948
2949Arguments:
2950 verb ACL verb
2951 cb ACL condition block - if NULL, result is OK
2952 where where called from
2953 addr the address being checked for RCPT, or NULL
2954 level the nesting level
2955 epp pointer to pass back TRUE if "endpass" encountered
2956 (applies only to "accept" and "discard")
2957 user_msgptr user message pointer
2958 log_msgptr log message pointer
2959 basic_errno pointer to where to put verify error
2960
2961Returns: OK - all conditions are met
2962 DISCARD - an "acl" condition returned DISCARD - only allowed
2963 for "accept" or "discard" verbs
2964 FAIL - at least one condition fails
2965 FAIL_DROP - an "acl" condition returned FAIL_DROP
2966 DEFER - can't tell at the moment (typically, lookup defer,
2967 but can be temporary callout problem)
2968 ERROR - ERROR from nested ACL or expansion failure or other
2969 error
2970*/
2971
2972static int
2973acl_check_condition(int verb, acl_condition_block *cb, int where,
2974 address_item *addr, int level, BOOL *epp, uschar **user_msgptr,
2975 uschar **log_msgptr, int *basic_errno)
2976{
2977uschar *user_message = NULL;
2978uschar *log_message = NULL;
059ec3d9 2979int rc = OK;
8523533c 2980#ifdef WITH_CONTENT_SCAN
0f0c8159 2981int sep = -'/';
8523533c 2982#endif
059ec3d9
PH
2983
2984for (; cb != NULL; cb = cb->next)
2985 {
55414b25 2986 const uschar *arg;
8e669ac1 2987 int control_type;
059ec3d9
PH
2988
2989 /* The message and log_message items set up messages to be used in
2990 case of rejection. They are expanded later. */
2991
2992 if (cb->type == ACLC_MESSAGE)
2993 {
187bc588 2994 HDEBUG(D_acl) debug_printf(" message: %s\n", cb->arg);
059ec3d9
PH
2995 user_message = cb->arg;
2996 continue;
2997 }
2998
2999 if (cb->type == ACLC_LOG_MESSAGE)
3000 {
187bc588 3001 HDEBUG(D_acl) debug_printf("l_message: %s\n", cb->arg);
059ec3d9
PH
3002 log_message = cb->arg;
3003 continue;
3004 }
3005
3006 /* The endpass "condition" just sets a flag to show it occurred. This is
3007 checked at compile time to be on an "accept" or "discard" item. */
3008
3009 if (cb->type == ACLC_ENDPASS)
3010 {
3011 *epp = TRUE;
3012 continue;
3013 }
3014
3015 /* For other conditions and modifiers, the argument is expanded now for some
3016 of them, but not for all, because expansion happens down in some lower level
3017 checking functions in some cases. */
3018
3019 if (cond_expand_at_top[cb->type])
3020 {
3021 arg = expand_string(cb->arg);
3022 if (arg == NULL)
3023 {
3024 if (expand_string_forcedfail) continue;
3025 *log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s",
3026 cb->arg, expand_string_message);
3027 return search_find_defer? DEFER : ERROR;
3028 }
3029 }
3030 else arg = cb->arg;
3031
3032 /* Show condition, and expanded condition if it's different */
3033
3034 HDEBUG(D_acl)
3035 {
3036 int lhswidth = 0;
3037 debug_printf("check %s%s %n",
3038 (!cond_modifiers[cb->type] && cb->u.negated)? "!":"",
3039 conditions[cb->type], &lhswidth);
3040
3041 if (cb->type == ACLC_SET)
3042 {
38a0a95f
PH
3043 debug_printf("acl_%s ", cb->u.varname);
3044 lhswidth += 5 + Ustrlen(cb->u.varname);
059ec3d9
PH
3045 }
3046
3047 debug_printf("= %s\n", cb->arg);
3048
3049 if (arg != cb->arg)
3050 debug_printf("%.*s= %s\n", lhswidth,
3051 US" ", CS arg);
3052 }
3053
3054 /* Check that this condition makes sense at this time */
3055
3056 if ((cond_forbids[cb->type] & (1 << where)) != 0)
3057 {
3058 *log_msgptr = string_sprintf("cannot %s %s condition in %s ACL",
3059 cond_modifiers[cb->type]? "use" : "test",
3060 conditions[cb->type], acl_wherenames[where]);
3061 return ERROR;
3062 }
3063
3064 /* Run the appropriate test for each condition, or take the appropriate
3065 action for the remaining modifiers. */
3066
3067 switch(cb->type)
3068 {
71fafd95
PH
3069 case ACLC_ADD_HEADER:
3070 setup_header(arg);
3071 break;
3072
059ec3d9
PH
3073 /* A nested ACL that returns "discard" makes sense only for an "accept" or
3074 "discard" verb. */
71fafd95 3075
059ec3d9 3076 case ACLC_ACL:
f60d98e8 3077 rc = acl_check_wargs(where, addr, arg, level+1, user_msgptr, log_msgptr);
7421ecab
JH
3078 if (rc == DISCARD && verb != ACL_ACCEPT && verb != ACL_DISCARD)
3079 {
3080 *log_msgptr = string_sprintf("nested ACL returned \"discard\" for "
3081 "\"%s\" command (only allowed with \"accept\" or \"discard\")",
3082 verbs[verb]);
3083 return ERROR;
3084 }
059ec3d9
PH
3085 break;
3086
3087 case ACLC_AUTHENTICATED:
3088 rc = (sender_host_authenticated == NULL)? FAIL :
3089 match_isinlist(sender_host_authenticated, &arg, 0, NULL, NULL, MCL_STRING,
3090 TRUE, NULL);
3091 break;
3092
71fafd95 3093 #ifdef EXPERIMENTAL_BRIGHTMAIL
8523533c
TK
3094 case ACLC_BMI_OPTIN:
3095 {
3096 int old_pool = store_pool;
3097 store_pool = POOL_PERM;
3098 bmi_current_optin = string_copy(arg);
3099 store_pool = old_pool;
3100 }
3101 break;
71fafd95 3102 #endif
8523533c 3103
059ec3d9 3104 case ACLC_CONDITION:
f3766eb5
NM
3105 /* The true/false parsing here should be kept in sync with that used in
3106 expand.c when dealing with ECOND_BOOL so that we don't have too many
3107 different definitions of what can be a boolean. */
51c7471d
JH
3108 if (*arg == '-'
3109 ? Ustrspn(arg+1, "0123456789") == Ustrlen(arg+1) /* Negative number */
3110 : Ustrspn(arg, "0123456789") == Ustrlen(arg)) /* Digits, or empty */
059ec3d9
PH
3111 rc = (Uatoi(arg) == 0)? FAIL : OK;
3112 else
3113 rc = (strcmpic(arg, US"no") == 0 ||
3114 strcmpic(arg, US"false") == 0)? FAIL :
3115 (strcmpic(arg, US"yes") == 0 ||
3116 strcmpic(arg, US"true") == 0)? OK : DEFER;
3117 if (rc == DEFER)
3118 *log_msgptr = string_sprintf("invalid \"condition\" value \"%s\"", arg);
3119 break;
3120
c3611384
PH
3121 case ACLC_CONTINUE: /* Always succeeds */
3122 break;
3123
059ec3d9 3124 case ACLC_CONTROL:
c5fcb476 3125 {
55414b25
JH
3126 const uschar *p = NULL;
3127 control_type = decode_control(arg, &p, where, log_msgptr);
4840604e 3128
55414b25 3129 /* Check if this control makes sense at this time */
f7572e5a 3130
55414b25
JH
3131 if ((control_forbids[control_type] & (1 << where)) != 0)
3132 {
3133 *log_msgptr = string_sprintf("cannot use \"control=%s\" in %s ACL",
3134 controls[control_type], acl_wherenames[where]);
3135 return ERROR;
3136 }
8800895a 3137
55414b25
JH
3138 switch(control_type)
3139 {
3140 case CONTROL_AUTH_UNADVERTISED:
3141 allow_auth_unadvertised = TRUE;
3142 break;
3143
3144 #ifdef EXPERIMENTAL_BRIGHTMAIL
3145 case CONTROL_BMI_RUN:
3146 bmi_run = 1;
3147 break;
3148 #endif
3149
3150 #ifndef DISABLE_DKIM
3151 case CONTROL_DKIM_VERIFY:
3152 dkim_disable_verify = TRUE;
3153 #ifdef EXPERIMENTAL_DMARC
3154 /* Since DKIM was blocked, skip DMARC too */
3155 dmarc_disable_verify = TRUE;
3156 dmarc_enable_forensic = FALSE;
3157 #endif
3158 break;
3159 #endif
3160
3161 #ifdef EXPERIMENTAL_DMARC
3162 case CONTROL_DMARC_VERIFY:
3163 dmarc_disable_verify = TRUE;
3164 break;
3165
3166 case CONTROL_DMARC_FORENSIC:
3167 dmarc_enable_forensic = TRUE;
3168 break;
3169 #endif
3170
3171 case CONTROL_DSCP:
3172 if (*p == '/')
3173 {
3174 int fd, af, level, optname, value;
3175 /* If we are acting on stdin, the setsockopt may fail if stdin is not
3176 a socket; we can accept that, we'll just debug-log failures anyway. */
3177 fd = fileno(smtp_in);
3178 af = ip_get_address_family(fd);
3179 if (af < 0)
3180 {
3181 HDEBUG(D_acl)
3182 debug_printf("smtp input is probably not a socket [%s], not setting DSCP\n",
3183 strerror(errno));
3184 break;
3185 }
3186 if (dscp_lookup(p+1, af, &level, &optname, &value))
3187 {
3188 if (setsockopt(fd, level, optname, &value, sizeof(value)) < 0)
3189 {
3190 HDEBUG(D_acl) debug_printf("failed to set input DSCP[%s]: %s\n",
3191 p+1, strerror(errno));
3192 }
3193 else
3194 {
3195 HDEBUG(D_acl) debug_printf("set input DSCP to \"%s\"\n", p+1);
3196 }
3197 }
3198 else
3199 {
3200 *log_msgptr = string_sprintf("unrecognised DSCP value in \"control=%s\"", arg);
3201 return ERROR;
3202 }
3203 }
3204 else
3205 {
3206 *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
3207 return ERROR;
3208 }
3209 break;
3210
3211 case CONTROL_ERROR:
3212 return ERROR;
3213
3214 case CONTROL_CASEFUL_LOCAL_PART:
3215 deliver_localpart = addr->cc_local_part;
3216 break;
3217
3218 case CONTROL_CASELOWER_LOCAL_PART:
3219 deliver_localpart = addr->lc_local_part;
3220 break;
3221
3222 case CONTROL_ENFORCE_SYNC:
3223 smtp_enforce_sync = TRUE;
3224 break;
3225
3226 case CONTROL_NO_ENFORCE_SYNC:
3227 smtp_enforce_sync = FALSE;
3228 break;
3229
3230 #ifdef WITH_CONTENT_SCAN
3231 case CONTROL_NO_MBOX_UNSPOOL:
3232 no_mbox_unspool = TRUE;
3233 break;
3234 #endif
3235
3236 case CONTROL_NO_MULTILINE:
3237 no_multiline_responses = TRUE;
3238 break;
3239
3240 case CONTROL_NO_PIPELINING:
3241 pipelining_enable = FALSE;
3242 break;
3243
3244 case CONTROL_NO_DELAY_FLUSH:
3245 disable_delay_flush = TRUE;
3246 break;
3247
3248 case CONTROL_NO_CALLOUT_FLUSH:
3249 disable_callout_flush = TRUE;
3250 break;
3251
3252 case CONTROL_FAKEREJECT:
3253 cancel_cutthrough_connection("fakereject");
3254 case CONTROL_FAKEDEFER:
3255 fake_response = (control_type == CONTROL_FAKEDEFER) ? DEFER : FAIL;
3256 if (*p == '/')
3257 {
3258 const uschar *pp = p + 1;
3259 while (*pp != 0) pp++;
3260 fake_response_text = expand_string(string_copyn(p+1, pp-p-1));
3261 p = pp;
3262 }
3263 else
3264 {
3265 /* Explicitly reset to default string */
3266 fake_response_text = US"Your message has been rejected but is being kept for evaluation.\nIf it was a legitimate message, it may still be delivered to the target recipient(s).";
3267 }
3268 break;
ed7f7860 3269
55414b25
JH
3270 case CONTROL_FREEZE:
3271 deliver_freeze = TRUE;
3272 deliver_frozen_at = time(NULL);
3273 freeze_tell = freeze_tell_config; /* Reset to configured value */
3274 if (Ustrncmp(p, "/no_tell", 8) == 0)
3275 {
3276 p += 8;
3277 freeze_tell = NULL;
3278 }
3279 if (*p != 0)
3280 {
3281 *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
3282 return ERROR;
3283 }
3284 cancel_cutthrough_connection("item frozen");
3285 break;
3286
3287 case CONTROL_QUEUE_ONLY:
3288 queue_only_policy = TRUE;
3289 cancel_cutthrough_connection("queueing forced");
3290 break;
3291
3292 case CONTROL_SUBMISSION:
3293 originator_name = US"";
3294 submission_mode = TRUE;
3295 while (*p == '/')
3296 {
3297 if (Ustrncmp(p, "/sender_retain", 14) == 0)
3298 {
3299 p += 14;
3300 active_local_sender_retain = TRUE;
3301 active_local_from_check = FALSE;
3302 }
3303 else if (Ustrncmp(p, "/domain=", 8) == 0)
3304 {
3305 const uschar *pp = p + 8;
3306 while (*pp != 0 && *pp != '/') pp++;
3307 submission_domain = string_copyn(p+8, pp-p-8);
3308 p = pp;
3309 }
3310 /* The name= option must be last, because it swallows the rest of
3311 the string. */
3312 else if (Ustrncmp(p, "/name=", 6) == 0)
3313 {
3314 const uschar *pp = p + 6;
3315 while (*pp != 0) pp++;
3316 submission_name = string_copy(parse_fix_phrase(p+6, pp-p-6,
3317 big_buffer, big_buffer_size));
3318 p = pp;
3319 }
3320 else break;
3321 }
3322 if (*p != 0)
3323 {
3324 *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
3325 return ERROR;
3326 }
3327 break;
e4bdf652 3328
55414b25 3329 case CONTROL_DEBUG:
55414b25 3330 {
b0d68adc
JH
3331 uschar * debug_tag = NULL;
3332 uschar * debug_opts = NULL;
3333 BOOL kill = FALSE;
3334
3335 while (*p == '/')
55414b25 3336 {
b0d68adc
JH
3337 const uschar * pp = p+1;
3338 if (Ustrncmp(pp, "tag=", 4) == 0)
3339 {
3340 for (pp += 4; *pp && *pp != '/';) pp++;
3341 debug_tag = string_copyn(p+5, pp-p-5);
3342 }
3343 else if (Ustrncmp(pp, "opts=", 5) == 0)
3344 {
3345 for (pp += 5; *pp && *pp != '/';) pp++;
3346 debug_opts = string_copyn(p+6, pp-p-6);
3347 }
3348 else if (Ustrncmp(pp, "kill", 4) == 0)
3349 {
3350 for (pp += 4; *pp && *pp != '/';) pp++;
3351 kill = TRUE;
3352 }
3353 else
3354 while (*pp && *pp != '/') pp++;
55414b25
JH
3355 p = pp;
3356 }
b0d68adc
JH
3357
3358 if (kill)
3359 debug_logging_stop();
3360 else
3361 debug_logging_activate(debug_tag, debug_opts);
55414b25 3362 }
55414b25
JH
3363 break;
3364
3365 case CONTROL_SUPPRESS_LOCAL_FIXUPS:
3366 suppress_local_fixups = TRUE;
3367 break;
3368
3369 case CONTROL_CUTTHROUGH_DELIVERY:
a2b89db1 3370#ifndef DISABLE_PRDR
55414b25 3371 if (prdr_requested)
a2b89db1
PP
3372#else
3373 if (0)
3374#endif
55414b25
JH
3375 /* Too hard to think about for now. We might in future cutthrough
3376 the case where both sides handle prdr and this-node prdr acl
3377 is "accept" */
93a6fce2 3378 *log_msgptr = string_sprintf("PRDR on %s reception\n", arg);
5032d1cf
JH
3379 else
3380 {
55414b25
JH
3381 if (deliver_freeze)
3382 *log_msgptr = US"frozen";
3383 else if (queue_only_policy)
3384 *log_msgptr = US"queue-only";
3385 else if (fake_response == FAIL)
3386 *log_msgptr = US"fakereject";
3387 else
3388 {
3389 if (rcpt_count == 1) cutthrough.delivery = TRUE;
3390 break;
3391 }
3392 *log_msgptr = string_sprintf("\"control=%s\" on %s item",
3393 arg, *log_msgptr);
5032d1cf 3394 }
55414b25 3395 return ERROR;
3c8b3577 3396
8c5d388a 3397#ifdef SUPPORT_I18N
3c8b3577
JH
3398 case CONTROL_UTF8_DOWNCONVERT:
3399 if (*p == '/')
3400 {
921dfc11
JH
3401 if (p[1] == '1')
3402 {
3403 message_utf8_downconvert = 1;
3404 addr->prop.utf8_downcvt = TRUE;
3405 addr->prop.utf8_downcvt_maybe = FALSE;
3406 p += 2;
3407 break;
3408 }
3409 if (p[1] == '0')
3410 {
3411 message_utf8_downconvert = 0;
3412 addr->prop.utf8_downcvt = FALSE;
3413 addr->prop.utf8_downcvt_maybe = FALSE;
3414 p += 2;
3415 break;
3416 }
3c8b3577 3417 if (p[1] == '-' && p[2] == '1')
921dfc11
JH
3418 {
3419 message_utf8_downconvert = -1;
3420 addr->prop.utf8_downcvt = FALSE;
3421 addr->prop.utf8_downcvt_maybe = TRUE;
3422 p += 3;
3423 break;
3424 }
3c8b3577
JH
3425 *log_msgptr = US"bad option value for control=utf8_downconvert";
3426 }
3427 else
3428 {
921dfc11
JH
3429 message_utf8_downconvert = 1;
3430 addr->prop.utf8_downcvt = TRUE;
3431 addr->prop.utf8_downcvt_maybe = FALSE;
3432 break;
3c8b3577
JH
3433 }
3434 return ERROR;
8c5d388a 3435#endif
3c8b3577 3436
9171d434 3437 }
55414b25 3438 break;
059ec3d9 3439 }
059ec3d9 3440
6a8f9482
TK
3441 #ifdef EXPERIMENTAL_DCC
3442 case ACLC_DCC:
3443 {
3444 /* Seperate the regular expression and any optional parameters. */
55414b25
JH
3445 const uschar * list = arg;
3446 uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
6a8f9482
TK
3447 /* Run the dcc backend. */
3448 rc = dcc_process(&ss);
3449 /* Modify return code based upon the existance of options. */
3c8b3577 3450 while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
6a8f9482 3451 if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
3c8b3577 3452 rc = FAIL; /* FAIL so that the message is passed to the next ACL */
6a8f9482
TK
3453 }
3454 break;
3455 #endif
3456
71fafd95 3457 #ifdef WITH_CONTENT_SCAN
8523533c
TK
3458 case ACLC_DECODE:
3459 rc = mime_decode(&arg);
3460 break;
71fafd95 3461 #endif
8523533c 3462
059ec3d9
PH
3463 case ACLC_DELAY:
3464 {
3465 int delay = readconf_readtime(arg, 0, FALSE);
3466 if (delay < 0)
3467 {
3468 *log_msgptr = string_sprintf("syntax error in argument for \"delay\" "
3469 "modifier: \"%s\" is not a time value", arg);
3470 return ERROR;
3471 }
3472 else
3473 {
3474 HDEBUG(D_acl) debug_printf("delay modifier requests %d-second delay\n",
3475 delay);
3476 if (host_checking)
3477 {
3478 HDEBUG(D_acl)
3479 debug_printf("delay skipped in -bh checking mode\n");
3480 }
010c2d14 3481
ae9d18bc
JH
3482 /* NOTE 1: Remember that we may be
3483 dealing with stdin/stdout here, in addition to TCP/IP connections.
3484 Also, delays may be specified for non-SMTP input, where smtp_out and
3485 smtp_in will be NULL. Whatever is done must work in all cases.
3486
3487 NOTE 2: The added feature of flushing the output before a delay must
3488 apply only to SMTP input. Hence the test for smtp_out being non-NULL.
3489 */
3490
3491 else
3492 {
3493 if (smtp_out != NULL && !disable_delay_flush)
3494 mac_smtp_fflush();
3495
861a7c51 3496#if !defined(NO_POLL_H) && defined (POLLRDHUP)
ae9d18bc
JH
3497 {
3498 struct pollfd p;
3499 nfds_t n = 0;
3500 if (smtp_out)
3501 {
3502 p.fd = fileno(smtp_out);
3503 p.events = POLLRDHUP;
3504 n = 1;
3505 }
3506 if (poll(&p, n, delay*1000) > 0)
3507 HDEBUG(D_acl) debug_printf("delay cancelled by peer close\n");
3508 }
3509#else
010c2d14
PH
3510 /* It appears to be impossible to detect that a TCP/IP connection has
3511 gone away without reading from it. This means that we cannot shorten
3512 the delay below if the client goes away, because we cannot discover
3513 that the client has closed its end of the connection. (The connection
3514 is actually in a half-closed state, waiting for the server to close its
3515 end.) It would be nice to be able to detect this state, so that the
3516 Exim process is not held up unnecessarily. However, it seems that we
3517 can't. The poll() function does not do the right thing, and in any case
3518 it is not always available.
047bdd8c 3519 */
010c2d14 3520
86b8287f 3521 while (delay > 0) delay = sleep(delay);
ae9d18bc 3522#endif
8e669ac1 3523 }
059ec3d9
PH
3524 }
3525 }
3526 break;
3527
80a47a2c
TK
3528 #ifndef DISABLE_DKIM
3529 case ACLC_DKIM_SIGNER:
9e5d6b55
TK
3530 if (dkim_cur_signer != NULL)
3531 rc = match_isinlist(dkim_cur_signer,
80a47a2c 3532 &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
80a47a2c 3533 else
80a47a2c 3534 rc = FAIL;
71fafd95
PH
3535 break;
3536
80a47a2c
TK
3537 case ACLC_DKIM_STATUS:
3538 rc = match_isinlist(dkim_exim_expand_query(DKIM_VERIFY_STATUS),
3539 &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
71fafd95
PH
3540 break;
3541 #endif
fb2274d4 3542
4840604e
TL
3543 #ifdef EXPERIMENTAL_DMARC
3544 case ACLC_DMARC_STATUS:
4a8ce2d8 3545 if (!dmarc_has_been_checked)
4840604e 3546 dmarc_process();
4a8ce2d8 3547 dmarc_has_been_checked = TRUE;
4840604e
TL
3548 /* used long way of dmarc_exim_expand_query() in case we need more
3549 * view into the process in the future. */
3550 rc = match_isinlist(dmarc_exim_expand_query(DMARC_VERIFY_STATUS),
3551 &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
3552 break;
3553 #endif
3554
059ec3d9 3555 case ACLC_DNSLISTS:
379ba7d0 3556 rc = verify_check_dnsbl(where, &arg, log_msgptr);
059ec3d9
PH
3557 break;
3558
3559 case ACLC_DOMAINS:
3560 rc = match_isinlist(addr->domain, &arg, 0, &domainlist_anchor,
55414b25 3561 addr->domain_cache, MCL_DOMAIN, TRUE, CUSS &deliver_domain_data);
059ec3d9
PH
3562 break;
3563
3564 /* The value in tls_cipher is the full cipher name, for example,
3565 TLSv1:DES-CBC3-SHA:168, whereas the values to test for are just the
3566 cipher names such as DES-CBC3-SHA. But program defensively. We don't know
3567 what may in practice come out of the SSL library - which at the time of
3568 writing is poorly documented. */
3569
3570 case ACLC_ENCRYPTED:
817d9f57 3571 if (tls_in.cipher == NULL) rc = FAIL; else
059ec3d9
PH
3572 {
3573 uschar *endcipher = NULL;
817d9f57
JH
3574 uschar *cipher = Ustrchr(tls_in.cipher, ':');
3575 if (cipher == NULL) cipher = tls_in.cipher; else
059ec3d9
PH
3576 {
3577 endcipher = Ustrchr(++cipher, ':');
3578 if (endcipher != NULL) *endcipher = 0;
3579 }
3580 rc = match_isinlist(cipher, &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL);
3581 if (endcipher != NULL) *endcipher = ':';
3582 }
3583 break;
3584
3585 /* Use verify_check_this_host() instead of verify_check_host() so that
3586 we can pass over &host_data to catch any looked up data. Once it has been
3587 set, it retains its value so that it's still there if another ACL verb
3588 comes through here and uses the cache. However, we must put it into
3589 permanent store in case it is also expected to be used in a subsequent
3590 message in the same SMTP connection. */
3591
3592 case ACLC_HOSTS:
3593 rc = verify_check_this_host(&arg, sender_host_cache, NULL,
55414b25
JH
3594 (sender_host_address == NULL)? US"" : sender_host_address,
3595 CUSS &host_data);
4a452c43
JH
3596 if (rc == DEFER) *log_msgptr = search_error_message;
3597 if (host_data) host_data = string_copy_malloc(host_data);
059ec3d9
PH
3598 break;
3599
3600 case ACLC_LOCAL_PARTS:
3601 rc = match_isinlist(addr->cc_local_part, &arg, 0,
3602 &localpartlist_anchor, addr->localpart_cache, MCL_LOCALPART, TRUE,
55414b25 3603 CUSS &deliver_localpart_data);
059ec3d9
PH
3604 break;
3605
6ea85e9a
PH
3606 case ACLC_LOG_REJECT_TARGET:
3607 {
3608 int logbits = 0;
3609 int sep = 0;
55414b25 3610 const uschar *s = arg;
6ea85e9a 3611 uschar *ss;
4a452c43 3612 while ((ss = string_nextinlist(&s, &sep, big_buffer, big_buffer_size)))
6ea85e9a
PH
3613 {
3614 if (Ustrcmp(ss, "main") == 0) logbits |= LOG_MAIN;
3615 else if (Ustrcmp(ss, "panic") == 0) logbits |= LOG_PANIC;
3616 else if (Ustrcmp(ss, "reject") == 0) logbits |= LOG_REJECT;
3617 else
3618 {
3619 logbits |= LOG_MAIN|LOG_REJECT;
3620 log_write(0, LOG_MAIN|LOG_PANIC, "unknown log name \"%s\" in "
3621 "\"log_reject_target\" in %s ACL", ss, acl_wherenames[where]);
3622 }
3623 }
3624 log_reject_target = logbits;
3625 }
3626 break;
3627
059ec3d9
PH
3628 case ACLC_LOGWRITE:
3629 {
3630 int logbits = 0;
55414b25 3631 const uschar *s = arg;
059ec3d9
PH
3632 if (*s == ':')
3633 {
3634 s++;
3635 while (*s != ':')
3636 {
3637 if (Ustrncmp(s, "main", 4) == 0)
3638 { logbits |= LOG_MAIN; s += 4; }
3639 else if (Ustrncmp(s, "panic", 5) == 0)
3640 { logbits |= LOG_PANIC; s += 5; }
3641 else if (Ustrncmp(s, "reject", 6) == 0)
3642 { logbits |= LOG_REJECT; s += 6; }
3643 else
3644 {
3645 logbits = LOG_MAIN|LOG_PANIC;
3646 s = string_sprintf(":unknown log name in \"%s\" in "
3647 "\"logwrite\" in %s ACL", arg, acl_wherenames[where]);
3648 }
3649 if (*s == ',') s++;
3650 }
3651 s++;
3652 }
3653 while (isspace(*s)) s++;
6ea85e9a
PH
3654
3655
059ec3d9
PH
3656 if (logbits == 0) logbits = LOG_MAIN;
3657 log_write(0, logbits, "%s", string_printing(s));
3658 }
3659 break;
8e669ac1 3660
71fafd95 3661 #ifdef WITH_CONTENT_SCAN
0f0c8159 3662 case ACLC_MALWARE: /* Run the malware backend. */
8523533c 3663 {
6ea85e9a 3664 /* Separate the regular expression and any optional parameters. */
55414b25
JH
3665 const uschar * list = arg;
3666 uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
0f0c8159
JH
3667 uschar *opt;
3668 BOOL defer_ok = FALSE;
3669 int timeout = 0;
3670
55414b25 3671 while ((opt = string_nextinlist(&list, &sep, NULL, 0)))
0f0c8159
JH
3672 if (strcmpic(opt, US"defer_ok") == 0)
3673 defer_ok = TRUE;
3674 else if ( strncmpic(opt, US"tmo=", 4) == 0
3675 && (timeout = readconf_readtime(opt+4, '\0', FALSE)) < 0
3676 )
3677 {
3678 *log_msgptr = string_sprintf("bad timeout value in '%s'", opt);
3679 return ERROR;
3680 }
3681
3682 rc = malware(ss, timeout);
3683 if (rc == DEFER && defer_ok)
3684 rc = FAIL; /* FAIL so that the message is passed to the next ACL */
8523533c
TK
3685 }
3686 break;
3687
3688 case ACLC_MIME_REGEX:
71fafd95 3689 rc = mime_regex(&arg);
8523533c 3690 break;
71fafd95 3691 #endif
059ec3d9 3692
870f6ba8 3693 case ACLC_RATELIMIT:
90fc3069 3694 rc = acl_ratelimit(arg, where, log_msgptr);
870f6ba8
TF
3695 break;
3696
059ec3d9 3697 case ACLC_RECIPIENTS:
55414b25
JH
3698 rc = match_address_list((const uschar *)addr->address, TRUE, TRUE, &arg, NULL, -1, 0,
3699 CUSS &recipient_data);
059ec3d9
PH
3700 break;
3701
71fafd95
PH
3702 #ifdef WITH_CONTENT_SCAN
3703 case ACLC_REGEX:
3704 rc = regex(&arg);
8523533c 3705 break;
71fafd95 3706 #endif
8523533c 3707
e7568d51
TL
3708 case ACLC_REMOVE_HEADER:
3709 setup_remove_header(arg);
3710 break;
3711
059ec3d9
PH
3712 case ACLC_SENDER_DOMAINS:
3713 {
3714 uschar *sdomain;
3715 sdomain = Ustrrchr(sender_address, '@');
3716 sdomain = (sdomain == NULL)? US"" : sdomain + 1;