Do not build International by default
[exim.git] / doc / doc-txt / OptionLists.txt
CommitLineData
495ae4b0
PH
1LISTS OF EXIM OPTIONS
2---------------------
3
0bd1a913 4This file contains complete lists of four kinds of Exim option:
495ae4b0
PH
5
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
10 (Local/eximon.conf).
11
22380b86 12This file was last updated for Exim release 4.72.
495ae4b0
PH
13
14
151. RUN TIME OPTIONS
16-------------------
17
18As Exim has developed, new options have been added at each major release. For
19the most part, backwards compatibility has been maintained, and obsolete
20options continue to be recognized. However, incompatible changes took place at
21releases 3.00, and 4.00. In both cases, several groups of options were
22amalgamated into new, extended options, and obsolete options were removed.
23
24The table below contains a complete list of all Exim's current options, along
25with their types, default values, and where they can be used. String options
26that are expanded before use are marked with *. Host lists, domain lists, and
27address lists are always expanded. In some cases the defaults are not fixed
28values, or not short enough to fit in the table. These are indicated by +. Some
29other default values are determined when the Exim binary is compiled; these are
30indicated by ++.
31
32For options that are specific to a particular driver, the fourth column
33contains the driver name, for example, appendfile. Otherwise, it contains
34
35 . `main' for options that appear in the main section of Exim's configuration
36 file;
37
38 . `authenticators' for generic options that apply to any authenticator;
39
40 . `routers' for generic options that apply to any router;
41
42 . `transports' for generic options that apply to any transport.
43
44The fifth column contains the version of Exim in which the option was added, or
45substantially changed. Where no number is given, the option has been in Exim
46since the very early releases. The routers were completely reorganised for
47release 4.00, and so no router options are shown as earlier than 4.00, though
48in fact some of them were inherited from earlier versions.
49
50-----------------------------------------------------------------------------------------
b1770b6e 51accept_8bitmime boolean true main 1.60 changed to true in 4.80
495ae4b0 52acl_not_smtp string* unset main 4.11
54cdb463 53acl_not_smtp_mime string* unset main 4.51 with content scan
495ae4b0
PH
54acl_smtp_auth string* unset main 4.00
55acl_smtp_connect string* unset main 4.11
56acl_smtp_data string* unset main 4.00
16722631
JH
57acl_smtp_data_prdr string* unset main 4.82 with expreimental_prdr
58acl_smtp_dkim string* unset main 4.70 unless disable_dkim
495ae4b0
PH
59acl_smtp_etrn string* unset main 4.00
60acl_smtp_expn string* unset main 4.00
61acl_smtp_helo string* unset main 4.20
62acl_smtp_mail string* unset main 4.11
63acl_smtp_mailauth string* unset main 4.21
54cdb463 64acl_smtp_mime string* unset main 4.50 with content scan
495ae4b0
PH
65acl_smtp_predata string* unset main 4.43
66acl_smtp_quit string* unset main 4.43
67acl_smtp_rcpt string* unset main 4.00
68acl_smtp_starttls string* unset main 4.11
69acl_smtp_vrfy string* unset main 4.00
70address_data string* unset routers 4.00
48c7f9e2 71address_retry_include_sender boolean true smtp 4.64
495ae4b0
PH
72address_test boolean true routers 4.14
73admin_groups string list unset main 3.02
74allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75allow_commands string list* unset pipe 1.89
76allow_defer boolean false redirect 4.00
77allow_fail boolean false redirect 4.00
78allow_filter boolean false redirect 4.00
79allow_freeze boolean false redirect 4.00
80allow_fifo boolean false appendfile 3.13
81allow_localhost boolean false smtp 1.73
82allow_mx_to_ip boolean false main 3.14
83allow_symlink boolean false appendfile
84allow_utf8_domains boolean false main 4.14
85auth_advertise_hosts host list "*" main 4.00
86authenticated_sender string* unset smtp 4.14
382afc6b 87authenticated_sender_force boolean false smtp 4.61
495ae4b0
PH
88authenticate_hosts host list unset smtp 3.13
89auto_thaw time 0s main
54cdb463 90av_scanner string* + main 4.50 with content scan
495ae4b0
PH
91batch_id string unset appendfile 4.00
92 unset lmtp 4.00
93 unset pipe 4.00
94batch_max integer 100 appendfile
95 100 lmtp 3.20
96 100 pipe
97bcc string* unset autoreply
98bi_command string unset main
99body_only boolean false transports 2.05
100bounce_message_file string unset main 4.00
101bounce_message_text string unset main 4.00
102bounce_return_body boolean true main 4.23
103bounce_return_message boolean true main 4.00
104bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
105bounce_sender_authentication string unset main 4.00
106callout_domain_negative_expire time 3h main 4.11
107callout_domain_positive_expire time 7d main 4.11
108callout_negative_expire time 2h main 4.11
109callout_positive_expire time 24h main 4.11
110callout_random_local_part string* + main 4.11
111cannot_route_message string* unset routers 4.11
112caseful_local_part boolean false routers 4.00
113cc string* unset autoreply
114check_ancestor boolean false redirect 4.00
115check_group boolean false appendfile
116 + redirect 4.00
117check_local_user boolean false routers 4.00
118check_log_inodes integer 0 main
119check_log_space integer 0 main
120check_owner boolean true appendfile 3.14
121 + redirect 4.00
d1e83bff 122check_rfc2047_length boolean true main 4.60
495ae4b0
PH
123check_secondary_mx boolean false dnslookup 4.00
124check_spool_inodes integer 0 main
125check_spool_space integer 0 main
126check_string string "From " appendfile 3.03
127 unset pipe 3.03
128check_srv string* unset dnslookup 4.31
8669f003 129client_condition string* unset authenticators 4.68
4730f942 130client_ignore_invalid_base64 boolean false plaintext 4.61
495ae4b0
PH
131client_name string* + cram_md5 3.10
132client_secret string* unset cram_md5 3.10
133client_send string* unset plaintext 3.10
134command string* unset lmtp 3.20
135 unset pipe
136 unset queryprogram 4.00
137command_group string unset queryprogram 4.00
138command_timeout time 5m smtp
139command_user string unset queryprogram 4.00
140condition string* unset routers 4.00
141connect_timeout time 0s smtp 1.60
142connection_max_messages integer 500 smtp 4.00 replaces batch_max
143create_directory boolean true appendfile
144create_file string "anywhere" appendfile
145current_directory string unset transports 4.00
146 unset queryprogram 4.00
147daemon_smtp_ports string unset main 1.75 pluralised in 4.21
4aee0225
PH
148daemon_startup_retries int 9 main 4.52
149daemon_startup_sleep time 30s main 4.52
495ae4b0
PH
150data string unset redirect 4.00
151data_timeout time 5m smtp
152debug_print string* unset authenticators 4.00
153 unset routers 4.00
154 unset transports 2.00
155delay_after_cutoff boolean true smtp
156delay_warning time list 24h main
157delay_warning_condition string* + main 1.73
158deliver_drop_privilege boolean false main 4.00
159deliver_queue_load_max fixed-point unset main 1.70
160delivery_date_add boolean false transports
161delivery_date_remove boolean true main
22380b86
PP
162dkim_canon string* unset smtp 4.70
163dkim_domain string list* unset smtp 4.72
164dkim_private_key string* unset smtp 4.70
165dkim_selector string* unset smtp 4.70
166dkim_sign_headers string* (RFC4871) smtp 4.70
167dkim_strict string* unset smtp 4.70
168dkim_verify_signers string* $dkim_signers main 4.70
495ae4b0 169directory string* unset appendfile
f324b55d 170directory_file string* + appendfile
495ae4b0
PH
171directory_mode octal-integer 0700 appendfile
172directory_transport string* unset redirect 4.00
7e66e54d 173disable_ipv6 boolean false main 4.61
495ae4b0 174disable_logging boolean false routers 4.11
7e66e54d 175 false transports 4.11
16722631
JH
176dmarc_forensic_sender string unset main 4.82 if experimental_dmarc
177dmarc_history_file string unset main 4.82 if experimental_dmarc
178dmarc_tld_file string unset main 4.82 if experimental_dmarc
495ae4b0
PH
179dns_again_means_nonexist domain list unset main 1.89
180dns_check_names_pattern string + main 2.11
068aaea8
PH
181dns_csa_search_limit integer 5 main 4.60
182dns_csa_use_reverse boolean true main 4.60
72c9e342 183dns_dnssec_ok integer -1 main 4.82
e682570f 184dns_dane_ok integer -1 main 4.83
495ae4b0
PH
185dns_ipv4_lookup boolean false main 3.20
186dns_qualify_single boolean true smtp
187dns_retrans time 0s main 1.60
188dns_retry integer 0 main 1.60
189dns_search_parents boolean false smtp
bdff9439 190dns_use_edns0 integer -1 main 4.76
495ae4b0
PH
191domains domain list unset routers 4.00
192driver string unset authenticators
193 unset routers 4.00
194 unset transports
195drop_cr boolean false main 4.00 became a no-op in 4.21
2c422e6f 196dscp string unset smtp 4.82
f89d2485 197dsn_from string* + main 4.67
495ae4b0
PH
198envelope_to_add boolean false transports
199envelope_to_remove boolean true main
200environment string* unset pipe 2.95
201errors_copy string list* unset main
202errors_reply_to string unset main
203errors_to string* unset routers 4.00
204escape_string string ">From " appendfile 3.03
205 unset pipe 3.03
206exim_group string ++ main
207exim_path string ++ main
208exim_user string ++ main
209expn boolean true routers
210extra_local_interfaces string unset main 4.21
211extract_addresses_remove_arguments boolean true main 1.92
212fail_verify boolean false routers
213fail_verify_recipient boolean false routers 4.00
214fail_verify_sender boolean false routers 4.00
215fallback_hosts string list unset routers 4.00
216 unset smtp
217file string* unset appendfile
218 unset autoreply
219 unset redirect 4.00
220file_expand boolean false autoreply
221file_format string unset appendfile 3.03
222file_must_exist boolean false appendfile
223file_optional boolean false autoreply
224file_transport string* unset redirect 4.00
4608d683 225filter_prepend_home boolean true redirect 4.63
495ae4b0
PH
226final_timeout time 10m smtp
227finduser_retries integer 0 main
228forbid_blackhole boolean false redirect 4.00
23c7ff99 229forbid_exim_filter boolean false redirect 4.44
495ae4b0
PH
230forbid_fail boolean false redirect 4.00
231forbid_file boolean false redirect 4.00
232forbid_filter_existstest boolean false redirect 4.00
233forbid_filter_logwrite boolean false redirect 4.00
234forbid_filter_lookup boolean false redirect 4.00
235forbid_filter_perl boolean false redirect 4.00
236forbid_filter_readfile boolean false redirect 4.00
237forbid_filter_readsocket boolean false redirect 4.11
238forbid_filter_reply boolean false redirect 4.00
239forbid_filter_run boolean false redirect 4.00
240forbid_include boolean false redirect 4.00
241forbid_pipe boolean false redirect 4.00
23c7ff99 242forbid_sieve_filter boolean false redirect 4.44
5abeaa6e 243forbid_smtp_code boolean false redirect 4.63
700d22f3 244force_command boolean false pipe 4.82
495ae4b0 245freeze_exec_fail boolean false pipe 1.89
2799857c 246freeze_signal boolean false pipe 4.75
495ae4b0
PH
247freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
248from string* unset autoreply
249gecos_name string* unset main
250gecos_pattern string unset main
251gethostbyname boolean false smtp
2519e60d 252gnutls_allow_auto_pkcs11 boolean false main 4.82
22380b86 253gnutls_compat_mode boolean unset main 4.70
17c76198
PP
254gnutls_require_kx string* unset main 4.67 deprecated, warns
255 string* unset smtp 4.67 deprecated, warns
256gnutls_require_mac string* unset main 4.67 deprecated, warns
257 string* unset smtp 4.67 deprecated, warns
258gnutls_require_protocols string* unset main 4.67 deprecated, warns
259 string* unset smtp 4.67 deprecated, warns
495ae4b0
PH
260group string + routers 4.00
261 unset transports 4.00 replaces local option in some transports
262header_line_maxsize integer 0 (unset) main 4.14
263header_maxsize integer 1M main 4.14
264headers string* unset autoreply
265headers_add string* unset routers 4.00
266 unset transports
267headers_charset string ++ main 4.21
268headers_only boolean false transports 2.05
269headers_remove string* unset routers 4.00
270 unset transports
271headers_rewrite string unset transports 3.20
272helo_accept_junk_hosts host list unset main 3.00
273helo_allow_chars string "" main 4.02
274helo_lookup_domains domain list unset main 4.00
275helo_data string* "$primary_hostname" smtp 3.21
276helo_try_verify_hosts host list unset main 4.00
277helo_verify_hosts host list unset main 1.73
278hide_child_in_errmsg false redirect 4.00
279hold_domains domain list unset main 1.70
280home_directory string* unset transports 4.00 replaces individual options
c456d9bb 281host_all_ignored string "defer" manualroute 4.67
495ae4b0
PH
282host_find_failed string "freeze" manualroute 4.00
283host_lookup host list unset main 3.00
284host_lookup_order string list "bydns:byaddr" main 4.30
285host_reject_connection host list unset main 4.00
286hosts string unset iplookup 4.00
287 string list* unset smtp
288hosts_avoid_esmtp host list unset smtp 4.21
c51b8e75 289hosts_avoid_pipelining host list unset smtp 4.67
495ae4b0
PH
290hosts_avoid_tls host list unset smtp 3.20
291hosts_connection_nolog host list unset main 4.43
292hosts_max_try integer 5 smtp 3.20
533244af 293hosts_max_try_hardlimit integer 50 smtp 4.50
495ae4b0
PH
294hosts_nopass_tls host list unset smtp 4.00
295hosts_override boolean false smtp 2.11
296hosts_randomize boolean false manualroute 4.00
297 false smtp 3.14
298hosts_require_auth host list unset smtp 4.00
16722631 299hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
495ae4b0
PH
300hosts_require_tls host list unset smtp 3.20
301hosts_treat_as_local domain list unset main 1.95
302hosts_try_auth host list unset smtp 4.00
16722631 303hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
595028e4 304ibase_servers string unset main 4.23
495ae4b0
PH
305ignore_bounce_errors_after time 0s main 4.00
306ignore_eacces boolean false redirect 4.00
307ignore_enotdir boolean false redirect 4.00
308ignore_fromline_hosts host list unset main
309ignore_fromline_local boolean false main 2.05
310ignore_status boolean false pipe
311ignore_target_hosts host list unset routers 4.00
312include_directory string unset redirect 4.00
313initgroups false routers 4.00
314interface string list unset smtp 1.70
315keep_malformed time 4d main
316keepalive boolean true smtp 2.05
317ldap_default_servers string list unset main 3.02
318ldap_version int 2 or 3 main 4.14
319local_from_check boolean true main 3.14
320local_from_prefix string unset main 3.14
321local_from_suffix string unset main 3.14
322local_interfaces string list unset main 1.60
323local_part_prefix string unset routers 4.00 replaces prefix
324local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
325local_part_suffix string unset routers 4.00 replaces suffix
326local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
327local_parts string list* unset routers 4.00
328local_scan_timeout time 5m main 4.03
329local_sender_retain boolean false main 4.00
330localhost_number string unset main
331lock_fcntl_timeout time 0s appendfile 3.14
332lock_flock_timeout time 0s appendfile 4.11
333lock_interval time 3s appendfile
334lock_retries integer 10 appendfile
335lockfile_mode octal-integer 0600 appendfile
336lockfile_timeout time 30m appendfile
337log string* unset autoreply
338log_as_local boolean + routers 4.00
339log_file_path string list ++ main
340log_defer_output boolean false pipe 1.89
341log_fail_output boolean false pipe 1.60
342log_output boolean false pipe 1.60
343log_selector string unset main 4.00
344log_timezone boolean false main 4.11
345lookup_open_max integer 25 main 2.05
346mailbox_filecount string* unset appendfile 4.43
347mailbox_size string* unset appendfile 4.43
348maildir_format boolean false appendfile 1.70
349maildir_retries integer 10 appendfile 1.70
350maildir_tag string* unset appendfile 1.92
76ba6b0a 351maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
d6629cdc 352maildirfolder_create_regex string unset appendfile 4.62
495ae4b0
PH
353mailstore_format boolean false appendfile 2.00
354mailstore_prefix string* unset appendfile 2.00
355mailstore_suffix string* unset appendfile 2.00
356match_directory string* unset localuser
357max_output integer 20K pipe
358max_rcpt integer 100 smtp 1.60
359max_user_name_length integer 0 main
360mbx_format boolean false appendfile 2.10
ddea74fa 361message_body_newlines boolean false main 4.68
495ae4b0
PH
362message_body_visible integer 500 main
363message_id_header_domain string* unset main 4.11
364message_id_header_text string* unset main
365message_logs boolean true main 4.10
366message_prefix string* + appendfile 4.00 replaces prefix
367 string* unset pipe 4.00 replaces prefix
1c098beb 368message_size_limit integer 50M main
495ae4b0
PH
369 0 transports 2.05
370message_suffix string* + appendfile 4.00 replaces suffix
371 string* unset pipe 4.00 replaces suffix
372mode octal-integer 0600 appendfile
373 0600 autoreply
374mode_fail_narrower boolean true appendfile 1.70
375modemask octal-integer 022 redirect 4.00
376more boolean true routers 4.00
377move_frozen_messages boolean false main 3.09
378multi_domain boolean true smtp
379mx_domains domain list unset dnslookup 4.00
380mx_fail_domains domain list unset dnslookup 4.43
381mysql_servers string list unset main 3.03
382never_users string list unset main
383notify_comsat boolean false appendfile
384once string* unset autoreply
385once_file_size integer 0 autoreply 3.20
386once_repeat time 0s autoreply 2.95
387one_time boolean false redirect 4.00
3ecab157 388openssl_options string +no_sslv2 main 4.73 default changed in 4.80
495ae4b0
PH
389optional boolean false iplookup 4.00
390oracle_servers string unset main 4.00
391owners string list unset redirect 4.00
392owngroups string list unset redirect 4.00
393pass_on_timeout boolean false routers 4.00
394pass_router string unset routers 4.00
395path string "/usr/bin" pipe
396percent_hack_domains domain list unset main
397perl_at_start boolean false main 2.10
398perl_startup string unset main 2.10
22380b86 399permit_coredump boolean false pipe 4.73
495ae4b0
PH
400pgsql_servers string list unset main 3.14
401pid_file_path string ++ main
402pipe_as_creator boolean false pipe
403pipe_transport string* unset redirect 4.00
404pipelining_advertise_hosts host list "*" main 4.14
405port integer 0 iplookup 4.00
406 string "smtp" smtp
407preserve_message_logs boolean false main
16722631 408prdr_enable boolean false main 4.82 if experimental_prdr
495ae4b0
PH
409primary_hostname string + main
410print_topbitchars boolean false main 1.89
411process_log_path string unset main 4.21
412prod_requires_admin boolean true main 1.70
413protocol string "udp" iplookup 4.00
414 string "smtp" smtp 3.20
415public_name string unset authenticators 3.10
416qualify_domain string + main
417 string* unset redirect 4.31
418qualify_preserve_domain boolean false redirect 4.00
419qualify_recipient string + main
420qualify_single boolean true dnslookup 4.00
421query string* + iplookup 4.00
422queue_domains domain list unset main 4.00
423queue_list_requires_admin boolean true main 1.95
424queue_only boolean false main
425queue_only_file string unset main 2.05
426queue_only_load fixed-point unset main
8669f003 427queue_only_load_latch boolean true main 4.68
495ae4b0
PH
428queue_only_override boolean true main 4.21
429queue_run_in_order boolean false main 1.70
430queue_run_max integer 5 main
431queue_smtp_domains domain list unset main
432quota string* unset appendfile 1.60
433quota_directory string* unset appendfile 4.11
434quota_filecount integer 0 appendfile 2.05
435quota_is_inclusive boolean true appendfile 3.20
436quota_size_regex string unset appendfile 3.14
437quota_warn_message string* + appendfile 2.10
438quota_warn_threshold string* 0 appendfile 2.10
439rcpt_include_affixes boolean false transports 4.21
440receive_timeout time 0s main 4.00 replacing accept_timeout
441received_header_text string* + main
442received_headers_max integer 30 main
443recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
444recipients_max integer 0 main 1.60
445recipients_max_reject boolean false main 1.70
446redirect_router string unset routers 4.00
447remote_max_parallel integer 1 main
448remote_sort_domains domain list unset main 4.00 replacing remote_sort
449repeat_use boolean true redirect 4.00
450reply_to string* unset autoreply 2.05
451reply_transport string* unset redirect 4.00
452require_files string list* unset routers 4.00
453reroute string* unset iplookup 4.00
454response_pattern string unset iplookup 4.00
455restrict_to_path boolean false pipe
456retry_data_expire time 7d main 3.03
457retry_include_ip_address boolean true smtp 1.92
458retry_interval_max time 24h main
459retry_use_local_part boolean + routers 4.00
460 + transports 4.00 replacing individual options
461return_fail_output boolean false pipe 1.60
462return_message boolean false autoreply
463return_output boolean false pipe
464return_path string* unset transports 2.05
465return_path_add boolean false transports
466return_path_remove boolean true main
467return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
468rewrite boolean true redirect 4.00
469rewrite_headers boolean true dnslookup 4.00
470rfc1413_hosts host list * main
8def5aaf 471rfc1413_query_timeout time 5s main
495ae4b0
PH
472router_home_directory string* unset routers 4.11
473route_data string* unset manualroute 4.00
474route_list string list unset manualroute 4.00
475same_domain_copy_routing boolean false dnslookup 4.00
476search_parents boolean false dnslookup 4.00
477self string "freeze" routers 4.00
478sender_unqualified_hosts host list unset main
479senders address list unset routers 4.00
480serialize_hosts host list unset smtp 1.60
481server_advertise_condition string* unset authenticators 4.14
b1770b6e 482server_channelbinding bool false gsasl 4.80
16ff981e 483server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
b1770b6e
PP
484server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
485server_keytab string* unset heimdal_gssapi 4.80
495ae4b0 486server_mail_auth_condition string* unset authenticators 3.22
b1770b6e
PP
487server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
488server_password string unset gsasl 4.80
495ae4b0 489server_prompts string* unset plaintext 3.10
b1770b6e
PP
490server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
491server_scram_iter string* unset gsasl 4.80
492server_scram_salt string* unset gsasl 4.80
495ae4b0 493server_secret string* unset cram_md5 3.10
b1770b6e 494server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
495ae4b0
PH
495server_set_id string* unset authenticators 3.10
496shadow_condition string* unset transports
497shadow_transport string unset transports
498size_addition integer 1024 smtp 1.91
499skip_syntax_errors boolean false redirect 4.00
500smtp_accept_keepalive boolean true main
501smtp_accept_max integer 20 main
502smtp_accept_max_nonmail integer 10 main 4.11
503smtp_accept_max_nonmail_hosts host list * main 4.14
504smtp_accept_max_per_connection integer 1000 main 4.00
505smtp_accept_max_per_host integer 0 main 2.05
506smtp_accept_queue integer 0 main
507smtp_accept_queue_per_connection integer 10 main 2.03
508smtp_accept_reserve integer 0 main
509smtp_active_hostname string* unset main 4.33
510smtp_banner string* + main
511smtp_check_spool_space boolean true main 2.10
512smtp_connect_backlog integer 5 main
513smtp_enforce_sync boolean true main 4.00
514smtp_etrn_command string* unset main 1.92
515smtp_etrn_serialize boolean true main 1.89
516smtp_load_reserve fixed-point unset main
517smtp_max_synprot_errors integer 3 main 4.30
518smtp_max_unknown_commands integer 3 main 4.14
519smtp_ratelimit_hosts host list unset main 4.00
520smtp_ratelimit_mail string unset main 4.00
521smtp_ratelimit_rcpt string unset main 4.00
522smtp_receive_timeout time 5m main
523smtp_reserve_hosts host list unset main
524smtp_return_error_details boolean false main 4.11
525socket string* unset lmtp 4.11
22380b86 526spamd_address string* + main 4.50 with content scan
495ae4b0
PH
527split_spool_directory boolean false main 1.70
528spool_directory string ++ main
31480e42 529sqlite_lock_timeout time 5s main 4.53
38a0a95f 530strict_acl_vars boolean false main 4.64
495ae4b0
PH
531srv_fail_domains domain list unset dnslookup 4.43
532strip_excess_angle_brackets boolean false main
533strip_trailing_dot boolean false main
534subject string* unset autoreply
535syntax_errors_text string* unset redirect 4.00
536syntax_errors_to string unset redirect 4.00
537syslog_duplication boolean true main 4.21
538syslog_facility string unset main 4.20
539syslog_processname string "exim" main 4.20
540syslog_timestamp boolean true main 4.00
541system_filter string unset main 4.00 replacing message_filter
542system_filter_directory_transport string unset main 4.00 replacing message_filter
543system_filter_file_transport string unset main 4.00 replacing message_filter
544system_filter_group string unset main 4.00 replacing message_filter
545system_filter_pipe_transport string unset main 4.00 replacing message_filter
546system_filter_reply_transport string unset main 4.00 replacing message_filter
547system_filter_user string unset main 4.00 replacing message_filter
548tcp_nodelay boolean true main 4.23
549 true smtp 4.23
5dc43717 550tcp_wrappers_daemon_name string* ++ main 4.73
495ae4b0
PH
551temp_errors string list + pipe 1.95
552text string* unset autoreply
553timeout time 5m lmtp 3.20
554 1h pipe
555 1h queryprogram 4.00
556 5s iplookup 4.00
2e2a30b4 557timeout_defer boolean false pipe 4.51
495ae4b0
PH
558timeout_frozen_after time 0s main 3.20
559timezone string + main 3.15
560tls_advertise_hosts host list * main 3.20
561tls_certificate string* unset main 3.20
562 unset smtp 3.20
e11808ae 563tls_dh_max_bits integer 2236 main 4.80
2c422e6f 564tls_dh_min_bits integer 1024 smtp 4.82
495ae4b0 565tls_dhparam string* unset main 3.20
16722631 566tls_ocsp_file string* unset main 4.80 if experimental_ocsp
495ae4b0
PH
567tls_on_connect_ports string unset main 4.43
568tls_privatekey string* unset main 3.20
569 unset smtp 3.20
570tls_remember_emstp boolean false main 4.21
571tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
572 string* unset main 4.33
b1770b6e 573tls_sni string* unset main 4.80
495ae4b0
PH
574tls_tempfail_tryclear boolean true smtp 4.05
575tls_try_verify_hosts host list unset main 4.00
576tls_verify_certificates string* unset main 3.20
577 unset smtp 3.20
578tls_verify_hosts host list unset main 3.20
579to string* unset autoreply
580translate_ip_address string unset routers 4.00
581transport string* unset routers 4.00
582transport_current_directory string unset routers 4.00
583transport_home_directory string unset routers 4.00
584transport_filter string unset transports
585transport_filter_timeout time 5m transports 4.30
586trusted_groups string list unset main
587trusted_users string list unset main
588umask octal-integer 022 pipe
589unknown_login string unset main
590unknown_username string unset main
591unseen boolean false routers 4.00
592untrusted_set_sender boolean false main 3.20
593use_bsmtp boolean false appendfile 4.00
594 false pipe 4.00
595use_crlf boolean false appendfile 1.89
596 false pipe 1.89
597use_fcntl_lock boolean + appendfile 1.70
598use_flock_lock boolean + appendfile 4.11
599use_lockfile boolean + appendfile
600use_mbx_lock boolean + appendfile 2.10
601use_shell boolean false pipe 1.70
602user string + routers 4.00
603 unset transports 4.00 replaces individual options
604uucp_from_pattern string + main 1.75
605uucp_from_sender string* "$1" main 1.75
606verify boolean true routers 4.00
607verify_only boolean false routers 4.00
608verify_recipient boolean true routers 4.00
609verify_sender boolean true routers 4.00
610warn_message_file string unset main 4.00
611widen_domains string list unset dnslookup 4.00
612write_rejectlog boolean true main 4.31
613
614
615
6162. COMMAND LINE OPTIONS
617-----------------------
618
619The table below contains a complete list of all Exim's command line options.
620Those marked with # are available only to trusted users, those marked with +
621are available only to admin users, and those marked with * exist only to
622provide compatibility with Sendmail.
623
624-- Terminate options
625--help Give a little help (not a lot)
4b2241d2 626--version Give version information (alias for -bV)
495ae4b0
PH
627-B * Ignored
628-bd + Start daemon
629-bdf + Start daemon and run it in the foreground
630-be Test string expansion
328895cc 631-bem Test string expansion, read test message first
495ae4b0
PH
632-bF Test system filter file
633-bf Test user filter file
634-bfd Set domain for filter testing
635-bfl Set local part for filter testing
636-bfp Set local part prefix for filter testing
637-bfs Set local part suffix for filter testing
638-bh Test incoming SMTP call, omitting callouts
639-bhc Test incoming SMTP call, with callouts
640-bi * Run <command>bi_command</command>
54c90be1 641-bI:help Show list of accepted -bI:<tag> options
495ae4b0 642-bm Accept message on standard input
22380b86 643-bmalware + Invoke configured malware scanning against supplied filename
495ae4b0
PH
644-bnq Don't qualify addresses in locally submitted messages
645-bP Show configuration option settings
646-bp + List the queue
647-bpa + ... with generated addresses as well
648-bpc + ... but just show a count of messages
649-bpr + ... do not sort
650-bpra + ... with generated addresses, unsorted
651-bpru + ... only undelivered addresses, unsorted
652-bpu + ... only undelivered addresses
653-brt Test retry rules
654-brw Test rewriting rules
655-bS Read batch SMTP on standard input
656-bs Run SMTP on standard input and output
657-bt Test address directing and routing
658-bV Verify version number
659-bv Test recipient address verification
660-bvs Test sender address verification
9ee44efb 661-bw + Inetd wait mode
495ae4b0
PH
662-C + Use alternate configuration file
663-D + Define macro for configuration file
3d235903
PH
664-d + Turn on debugging output
665-dd + Ditto, but if a daemon, not for subprocesses
495ae4b0
PH
666-dropcr Remove CR character in input: became a no-op in 4.21
667-E Internal use only
668-ex * Synonym for -oex (for several different x)
669-F Set calling user name
670-f # Set calling user address
671-G * Ignored
672-h * Ignored
673-i Dot does not terminate message
674-M + Force deliver specific message
675-Mar + Add recipient to message
676-MC Internal use only
677-MCA Internal use only
678-MCP Internal use only
679-MCQ Internal use only
680-MCS Internal use only
681-MCT Internal use only
682-Mc + Deliver specific message
683-Mes + Edit message sender
684-Mf + Freeze message(s)
685-Mg + Give up (bounce) message(s)
686-Mmad + Mark all recipients delivered
687-Mmd + Mark one recipient delivered
688-Mrm + Remove message(s) (no bounce)
328895cc 689-Mset + Load message's variables when testing with -be
495ae4b0
PH
690-Mt + Thaw message(s)
691-Mvb + View message body
22380b86 692-Mvc + View entire message in RFC 2822 format
495ae4b0
PH
693-Mvh + View message header
694-Mvl + View message log
695-m * Ignored
696-N + Deliver without transporting
697-n * Ignored
698-O * Ignored
699-oA * Supply argument for <option>-bi</option>
700-oB Set max messages down one connection
701-odb Background delivery
702-odf Foreground delivery
703-odi Foreground delivery
704-odq Queue message; do not deliver
705-odqs ... do not do SMTP deliveries
706-oee Error sent by mail; zero return code
707-oem Error sent by mail; non-zero return code
708-oep Error written to standard error stream
709-oeq * Error written to standard error stream
710-oew * Error sent by mail; non-zero return code
711-oi Dot does not terminate message
712-oitrue * Dot does not terminate message
713-oMa # Supply host address
714-oMaa # Supply authenticator name
715-oMai # Supply authenticated id
716-oMas # Supply authenticated sender
717-oMi # Supply interface address
d2af03f4 718-oMm # Supply message reference
495ae4b0
PH
719-oMr # Supply protocol name
720-oMs # Supply host name
721-oMt # Supply ident string
722-om * Ignored
723-oo * Ignored
724-oP * Specify path for daemon's pid file
725-or Timeout non-SMTP messages
726-os Timeout for SMTP messages
727-ov * Verbose; same as -v
728-oX Alternative port for daemon
729-pd Delay Perl interpreter start
730-ps Do not delay Perl interpreter start
731-p<r>:<s> * Same as -oMr <r> -oMs <s>
732-q + Run the queue )
733-qf + ... force delivery ) Other combinations are
734-qff + ... and include frozen messages ) possible. The syntax is
735-qi + ... initial deliveries only )
736-ql + ... local deliveries only ) -q[q][f][f][i|l][time]
737-qq + Two-stage queue run )
738-qR * Same as -R
739-qS * Same as -S
740-R Select by recipient in queue run
741-Rf ... with forcing
742-Rff ... and frozen messages
743-Rr ... using regular expression
744-Rrf ... with forcing
745-Rrff ... and frozen messages
746-r * Synonym for -f
747-S Select by sender in queue run
748-Sf ... with forcing
749-Sff ... and frozen messages
750-Sr ... using regular expression
751-Srf ... with forcing
752-Srff ... and frozen messages
753-Tqt * Used by Exim test suite; not recognized in normal use
754-t Take recipients from header lines
755-ti * Same as -t -i
756-tls-on-connect Do TLS on startup (for legacy clients)
757-U * Ignored
758-v Verbose - shows SMTP dialogue and other delivery info
759-x Ignored (AIX compatibility)
760
761
7623. BUILD TIME OPTIONS FOR EXIM
763------------------------------
764
76ba6b0a
PP
765The table below contains a "mostly" complete list of options that can be
766set in Local/Makefile when building Exim. The only items not included are
767those whose names can be trivially derived from rules stated below.
768
769More information about individual options can be found in src/EDITME and
770OS/Makefile-Default.
495ae4b0
PH
771
772The second column below gives the type of option:
773
774 . `system' means the option is concerned with the operating system;
775
776 . `driver' means the option selects a driver to be included in the binary;
777
778 . `lookup' means the option selects a lookuptype to be included in the binary;
779
780 . `mandatory' means the option is required to be supplied;
781
782 . `recommended' means the option is recommended to be supplied;
783
784 . `optional' means what it says;
785
786Those marked with * are specialized and are unlikely to be required in most
787installations. Those that are marked with ** are commonly set in OS-specific
788Makefiles. If you use any of these in your Local/Makefile, you may need to
789reproduce some of the OS-specific settings. For example, in the Makefile for
790Solaris (which is actually called OS/Makefile-SunOS5), there is
791
792 LIBS=-lsocket -lnsl -lkstat
793
794If you use LIBS to add extra libraries, you must also include the OS ones in
795your setting. It is better, in this particular case, to use EXTRALIBS, which is
796empty by default, and is provided for just this reason. Of course, if you do
797actually want to modify a setting from the OS-specific file, there is nothing
798to stop you overriding it in your Local/Makefile.
799
76ba6b0a
PP
800When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
801you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
802libraries specific only to that module. These rules are only used where the
803relevant lookup is a module. These options are not explicitly listed below.
804
805Variables with names endined `_PC' are used for pkg-config integration; setting
806the value to the name of a pkg-config package will cause Exim's build system to
807query the --cflags and --libs for the given name, when building anything
808dependent upon the component associated with the `_PC' variable. For lookups,
809if the lookup is dynamically loaded, then this *replaces* the use of the
810corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
811is statically loaded into Exim, the results will be inserted into the
812"LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
813will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
814only listed below for the TLS implementation cases.
815
816
495ae4b0
PH
817Option Type Description
818------------------------------------------------------------------------------
819
820ALT_CONFIG_PREFIX optional restricts location of -C files
495ae4b0
PH
821APPENDFILE_MODE optional*
822APPENDFILE_DIRECTORY_MODE optional*
823APPENDFILE_LOCKFILE_MODE optional*
824AR system command to build a library
825AUTH_CRAM_MD5 driver include cram_md5 authenticator
068aaea8 826AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
76ba6b0a
PP
827AUTH_GSASL driver include GNU SASL authenticator
828AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
829AUTH_LIBS system library linkage for authenticators
495ae4b0
PH
830AUTH_PLAINTEXT driver include plaintext authenticator
831AUTH_SPA driver include SPA (NTLM) authenticator
f78eb7c6 832AUTH_VARS=3 optional* number of $auth variables
495ae4b0
PH
833BASENAME_COMMAND system** path to basename
834BASE_62=62 optional* not normally changed for Unix
835BIN_DIRECTORY mandatory Exim binary directory
836CC system** C compiler
837CFLAGS system** flags for C compiler
35110e70 838CFLAGS_DYNAMIC system** extra flags needed for .so modules
495ae4b0
PH
839CHGRP_COMMAND system** path to chgrp
840CHOWN_COMMAND system** path to chown
841COMPRESS_COMMAND system path to a compress command
842COMPRESS_SUFFIX system suffix added to compressed files
843CONFIGURE_FILE mandatory Exim runtime configuration file
844CONFIGURE_FILE_USE_EUID optional*
845CONFIGURE_FILE_USE_NODE optional*
35edf2ff 846CONFIGURE_GROUP optional* alternate group for configuration file
495ae4b0
PH
847CONFIGURE_OWNER optional* alternate owner for configuration file
848CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
849DBMLIB optional** location of DBM library
850DB_DIRECTORY_MODE optional* mode for hints directory
851DB_LOCKFILE_MODE optional* mode for hints lock files
852DB_LOCK_TIMEOUT optional* timeout for hints lock files
853DB_MODE optional* mode for hints files
96c065cb 854DEFAULT_CRYPT optional default crypt() function
495ae4b0
PH
855DELIVER_IN_BUFFER_SIZE optional*
856DELIVER_OUT_BUFFER_SIZE optional*
22380b86 857DISABLE_DKIM optional disables DKIM support
1f4a55da 858DISABLE_DNSSEC optional disables attempts to use DNSSEC
495ae4b0
PH
859DISABLE_D_OPTION optional disables -D option
860ERRNO_QUOTA optional* error code for system quota failures
861EXICYCLOG_MAX optional number of old log files to keep
862EXIMDB_DIRECTORY_MODE optional* for hints database directory
863EXIMDB_LOCKFILE_MODE optional* for hints lock files
864EXIMDB_MODE optional* mode for hints files
865EXIMON_TEXTPOP system**
866EXIM_CHMOD optional*
867EXIM_GROUP mandatory group to use for Exim
868EXIM_MONITOR optional set to eximon.bin to compile
869EXIM_PERL optional
870EXIM_USER mandatory user to use for Exim
871EXIWHAT_EGREP_ARG system** to find Exim processes from ps
872EXIWHAT_KILL_SIGNAL system** -SIGUSER1 or numerical equivalent
873EXIWHAT_MULTIKILL_CMD system**
874EXIWHAT_MULTIKILL_ARG system**
875EXIWHAT_PS_ARG system** to list all processes
876EXIWHAT_PS_CMD system** path to ps command
39257585 877EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
495ae4b0
PH
878EXTRALIBS system additional libraries
879EXTRALIBS_EXIM system additional libraries for Exim only
880EXTRALIBS_EXIMON system additional libraries for the monitor
881FIXED_NEVER_USERS optional can't override at runtime
882HAVE_ICONV system the iconv() function is available
883HAVE_IPV6 system include IPv6 support
884HEADERS_CHARSET optional charset for decoded header lines
885HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
886HEADER_MAXSIZE optional* max memory for message header
887HOSTNAME_COMMAND system** path to hostname command
888INCLUDE system path to include files
889INFO_DIRECTORY optional directory for Info documentation
890INPUT_DIRECTORY_MODE optional mode for input directory
891IPV6_INCLUDE system additional includes for IPv6
892IPV6_LIBS system additional libraries for IPv6
893LDAP_LIB_TYPE optional type of LDAP library
894LFLAGS system** link editor flags
895LIBIDENTCFLAGS system C flags when compiling libident
896LIBIDENTNAME system name for libident library
897LIBRESOLV system** library for DNS resolver
898LIBS system** additional libraries
899LIBS_EXIM system** additional libraries for Exim ony
900LIBS_EXIMON system** additional libraries for monitor
901LOCAL_SCAN_SOURCE optional location of local_scan() source
902LOG_DIRECTORY_MODE optional mode for log directory
903LOG_FILE_PATH optional path to log files
904LOG_MODE optional mode for log files
905LOOKUP_CDB lookup include cdb lookup
906LOOKUP_DBM lookup include dbm lookup
907LOOKUP_DNSDB lookup include dnsdb lookup
908LOOKUP_DSEARCH lookup include dsearch lookup
909LOOKUP_INCLUDE lookup include files for lookups
910LOOKUP_LDAP lookup include ldap lookup
911LOOKUP_LIBS lookup include libraries for lookups
912LOOKUP_LSEARCH lookup include all lsearch lookups
35110e70 913LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
495ae4b0
PH
914LOOKUP_MYSQL lookup include mysql lookup
915LOOKUP_NIS lookup include nis lookup
916LOOKUP_NISPLUS lookup include nisplus lookup
917LOOKUP_ORACLE lookup include oracle lookup
918LOOKUP_PGSQL lookup include pgsql lookup
919LOOKUP_TESTDB lookup*
920LOOKUP_WHOSON lookup include whoson lookup
35110e70
PP
921LOOKUP_*_INCLUDE optional* include files for dynamic module
922LOOKUP_*_LIBS optional* libraries for dynamic module
495ae4b0
PH
923MAKE_SHELL optional* shell to use for make
924MAX_FILTER_SIZE optional* max file size for filter files
925MAX_INCLUDE_SIZE optional* max file size for :include: files
926MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
927MAX_NAMED_LIST optional* max named lists of a given type
928MAX_INTERFACES system maximum network interfaces
929MSGLOG_DIRECTORY_MODE optional* mode for message log directory
930MV_COMMAND system path to mv command
931NO_SYMLINK optional install doesn't make 'exim" symlink
6a6084f8
PP
932PCRE_CONFIG system* use pcre-config for PCRE support
933PCRE_LIBS system* library for using PCRE
495ae4b0
PH
934PERL_CC system* compiler for Perl interface code
935PERL_CCOPTS system* flags for same
936PERL_COMMAND system path to Perl
937PERL_LIBS system* library for compiling Perl interface
938PID_FILE_PATH optional path to daemon's pid file
939RADIUS_CONFIG_FILE optional path to Radius config file
940RADIUS_LIB_TYPE optional type of RADIUS library
941RANLIB system** path to ranlib command
942RM_COMMAND system path to rm command
943ROUTER_ACCEPT driver include accept router
944ROUTER_DNSLOOKUP driver include dnslookup router
945ROUTER_MANUALROUTE driver include manualroute router
946ROUTER_IPLITERAL driver include ipliteral router
947ROUTER_IPLOOKUP driver include iplookup router
948ROUTER_REDIRECT driver include redirect router
949ROUTER_QUERYPROGRAM driver include queryprogram router
950SPOOL_DIRECTORY recommended path to spool directory
951SPOOL_DIRECTORY_MODE optional mode of spool directory
952SPOOL_MODE optional mode of spool files
953STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
954STRIP_COMMAND optional* can be used to strp binaries
955SUPPORT_A6 optional* support A6 DNS records
956SUPPORT_CRYPTEQ optional support crypteq (if no auths)
957SUPPORT_MAILDIR optional support for maildir delivery
958SUPPORT_MAILSTORE optional support for mailstore delivery
959SUPPORT_MBX optional support for MBX delivery
960SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
961SUPPORT_PAM optional support for PAM authentication
962SUPPORT_TLS optional support for TLS encryption over SMTP
963SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
964SYSLOG_LOG_PID optional add pid to syslog lines
965SYSLOG_LONG_LINES optional do not split long syslog lines
966SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
35110e70 967TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
495ae4b0
PH
968TIMEZONE_DEFAULT optional default for timezone option
969TLS_INCLUDE optional path to include files for TLS
970TLS_LIBS optional additional libraries for TLS
971TMPDIR system value for TMPDIR environment variable
972TRANSPORT_APPENDFILE driver include appendfile transport
973TRANSPORT_AUTOREPLY driver include autoreply transport
974TRANSPORT_LMTP driver include lmtp transport
975TRANSPORT_PIPE driver include pipe transport
976TRANSPORT_SMTP driver include smtp transport
35110e70 977TRUSTED_CONFIG_LIST optional config files safe to retain privileges
495ae4b0
PH
978USE_DB system** use native DB interface
979USE_GNUTLS optional use GnuTLS instead of OpenSSL
76ba6b0a
PP
980USE_GNUTLS_PC optional probably "gnutls"
981USE_OPENSSL_PC optional probably "openssl"
495ae4b0
PH
982USE_READLINE optional try to load libreadline for -be
983USE_TCP_WRAPPERS system link with tcpwrappers
984USE_TDB optional use the tdb DB interface
35110e70 985WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
22380b86 986WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
495ae4b0
PH
987X11 system** X11 base directory
988X11_LD_LIB system** X11 link library
989XINCLUDE system** X11 include directory
990XLFLAGS system** X11 link time flags
991ZCAT_COMMAND system path to zcat command
992
993
9944. BUILD TIME OPTIONS FOR EXIMON
995--------------------------------
996
997The table below contains a complete list of options that can be set in
998Local/eximon.conf when building the Exim monitor. Where the default is shown as
999** it means that the text string is too long to fit in the table and is instead
1000given below. A blank default means that there is no default value.
1001
1002ACTION_OUTPUT=no show output for every action
1003ACTION_QUEUE_UPDATE=yes update queue display after actions
1004BODY_MAX=20000 maximum body display
1005DOMAIN= domain to strip from window title
1006LOG_BUFFER=20K buffer for log tail
1007LOG_DEPTH=300 depth of log subwindow
1008LOG_FONT=** font for log display
1009LOG_STRIPCHARTS=** patterns for stripcharts
1010LOG_WIDTH=950 width of log subwindow
1011MENU_EVENT='Shift<Btn1Down>' keypress for menu
1012MIN_HEIGHT=162 minimum window height
1013MIN_WIDTH=103 minimum window width
1014QUALIFY_DOMAIN= local domain to strip from addresses
1015QUEUE_DEPTH=200 depth of queue subwindow
1016QUEUE_FONT=$LOG_FONT font for queue display
1017QUEUE_INTERVAL=300 queue refresh interval
1018QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1019QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1020QUEUE_WIDTH=950 width of queue subwindow
1021SIZE_STRIPCHART= request partition size stripchart
1022SIZE_STRIPCHART_NAME=space name for size stripchart
1023START_SMALL=no if yes, start with small window
1024STRIPCHART_INTERVAL=60 stripchart refresh interval
1025TEXT_DEPTH=200 depth of text windows
1026WINDOW_TITLE="${hostname} eximon" window title
1027
1028The default for LOG_FONT is
1029
1030 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1031
1032and the default for LOG_STRIPCHARTS is
1033
1034 LOG_STRIPCHARTS='/ <= /in/
1035 / => /out/
1036 / => .+ R=local/local/
1037 / => .+ T=[^ ]*smtp/smtp/'
1038
1039That is, there are four stripcharts, named in, out, local, and smtp. The first
1040counts message arrivals, the second counts all deliveries, the third counts
1041deliveries where the router's name starts with "local", and the fourth counts
1042deliveries where the transport name contains "smtp".
1043
1044**** End of OptionLists ****