Commit | Line | Data |
---|---|---|
495ae4b0 PH |
1 | New Features in Exim |
2 | -------------------- | |
3 | ||
38a0a95f PH |
4 | This file contains descriptions of new features that have been added to Exim. |
5 | Before a formal release, there may be quite a lot of detail so that people can | |
6 | test from the snapshots or the CVS before the documentation is updated. Once | |
7 | the documentation is updated, this file is reduced to a short list. | |
8 | ||
6ece2e77 TL |
9 | Version 4.83 |
10 | ------------ | |
11 | ||
a3c86431 TL |
12 | 1. If built with the EXPERIMENTAL_PROXY feature enabled, Exim can be |
13 | configured to expect an initial header from a proxy that will make the | |
14 | actual external source IP:host be used in exim instead of the IP of the | |
15 | proxy that is connecting to it. | |
16 | ||
770747fd MFM |
17 | 2. New verify option header_names_ascii, which will check to make sure |
18 | there are no non-ASCII characters in header names. Exim itself handles | |
19 | those non-ASCII characters, but downstream apps may not, so Exim can | |
20 | detect and reject if those characters are present. | |
21 | ||
b9c2e32f AR |
22 | 3. New expansion operator ${utf8clean:string} to replace malformed UTF8 |
23 | codepoints with valid ones. | |
24 | ||
b1f8e4f8 JH |
25 | 4. New malware type "sock". Talks over a Unix or TCP socket, sending one |
26 | command line and matching a regex against the return data for trigger | |
27 | and a second regex to extract malware_name. The mail spoofile name can | |
28 | be included in the command line. | |
29 | ||
dc4dc04e JH |
30 | 5. The smtp transport now supports options "tls_verify_hosts" and |
31 | "tls_try_verify_hosts". If either is set the certificate verification | |
32 | is split from the encryption operation. The default remains that a failed | |
33 | verification cancels the encryption. | |
214042d2 | 34 | |
deae092e HS |
35 | 6. New SERVERS override of default ldap server list. In the ACLs, an ldap |
36 | lookup can now set a list of servers to use that is different from the | |
37 | default list. | |
38 | ||
8d91c6dc LT |
39 | 7. New command-line option -C for exiqgrep to specify alternate exim.conf |
40 | file when searching the queue. | |
41 | ||
2b4a568d JH |
42 | 8. EXPERIMENTAL_OCSP now supports GnuTLS also, if you have version 3.1.3 |
43 | or later of that. | |
44 | ||
578897ea JH |
45 | 9. Support for DNSSEC on outbound connections. |
46 | ||
6ece2e77 | 47 | |
2c422e6f | 48 | Version 4.82 |
98a90c36 PP |
49 | ------------ |
50 | ||
51 | 1. New command-line option -bI:sieve will list all supported sieve extensions | |
52 | of this Exim build on standard output, one per line. | |
53 | ManageSieve (RFC 5804) providers managing scripts for use by Exim should | |
54 | query this to establish the correct list to include in the protocol's | |
55 | SIEVE capability line. | |
56 | ||
12f69989 PP |
57 | 2. If the -n option is combined with the -bP option, then the name of an |
58 | emitted option is not output, only the value (if visible to you). | |
59 | For instance, "exim -n -bP pid_file_path" should just emit a pathname | |
60 | followed by a newline, and no other text. | |
61 | ||
54c90be1 PP |
62 | 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now |
63 | has a "tls_dh_min_bits" option, to set the minimum acceptable number of | |
64 | bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites) | |
65 | acceptable for security. (Option accepted but ignored if using OpenSSL). | |
66 | Defaults to 1024, the old value. May be lowered only to 512, or raised as | |
67 | far as you like. Raising this may hinder TLS interoperability with other | |
68 | sites and is not currently recommended. Lowering this will permit you to | |
69 | establish a TLS session which is not as secure as you might like. | |
70 | ||
71 | Unless you really know what you are doing, leave it alone. | |
72 | ||
1f4a55da | 73 | 4. If not built with DISABLE_DNSSEC, Exim now has the main option |
0fbd9bff | 74 | dns_dnssec_ok; if set to 1 then Exim will initialise the resolver library |
1f4a55da PP |
75 | to send the DO flag to your recursive resolver. If you have a recursive |
76 | resolver, which can set the Authenticated Data (AD) flag in results, Exim | |
0fbd9bff PP |
77 | can now detect this. Exim does not perform validation itself, instead |
78 | relying upon a trusted path to the resolver. | |
1f4a55da PP |
79 | |
80 | Current status: work-in-progress; $sender_host_dnssec variable added. | |
81 | ||
36a3ae5f PP |
82 | 5. DSCP support for outbound connections: on a transport using the smtp driver, |
83 | set "dscp = ef", for instance, to cause the connections to have the relevant | |
13363eba PP |
84 | DSCP (IPv4 TOS or IPv6 TCLASS) value in the header. |
85 | ||
86 | Similarly for inbound connections, there is a new control modifier, dscp, | |
87 | so "warn control = dscp/ef" in the connect ACL, or after authentication. | |
88 | ||
89 | Supported values depend upon system libraries. "exim -bI:dscp" to list the | |
90 | ones Exim knows of. You can also set a raw number 0..0x3F. | |
36a3ae5f | 91 | |
f4ee74ac PP |
92 | 6. The -G command-line flag is no longer ignored; it is now equivalent to an |
93 | ACL setting "control = suppress_local_fixups". The -L command-line flag | |
94 | is now accepted and forces use of syslog, with the provided tag as the | |
95 | process name. A few other flags used by Sendmail are now accepted and | |
96 | ignored. | |
97 | ||
976b7e9f JH |
98 | 7. New cutthrough routing feature. Requested by a "control = cutthrough_delivery" |
99 | ACL modifier; works for single-recipient mails which are recieved on and | |
100 | deliverable via SMTP. Using the connection made for a recipient verify, | |
101 | if requested before the verify, or a new one made for the purpose while | |
102 | the inbound connection is still active. The bulk of the mail item is copied | |
103 | direct from the inbound socket to the outbound (as well as the spool file). | |
104 | When the source notifies the end of data, the data acceptance by the destination | |
105 | is negociated before the acceptance is sent to the source. If the destination | |
106 | does not accept the mail item, for example due to content-scanning, the item | |
107 | is not accepted from the source and therefore there is no need to generate | |
108 | a bounce mail. This is of benefit when providing a secondary-MX service. | |
109 | The downside is that delays are under the control of the ultimate destination | |
110 | system not your own. | |
111 | ||
112 | The Recieved-by: header on items delivered by cutthrough is generated | |
042eb971 | 113 | early in reception rather than at the end; this will affect any timestamp |
976b7e9f JH |
114 | included. The log line showing delivery is recorded before that showing |
115 | reception; it uses a new ">>" tag instead of "=>". | |
06a6f4ed | 116 | |
976b7e9f JH |
117 | To support the feature, verify-callout connections can now use ESMTP and TLS. |
118 | The usual smtp transport options are honoured, plus a (new, default everything) | |
119 | hosts_verify_avoid_tls. | |
120 | ||
121 | New variable families named tls_in_cipher, tls_out_cipher etc. are introduced | |
122 | for specific access to the information for each connection. The old names | |
123 | are present for now but deprecated. | |
124 | ||
fcc8e047 | 125 | Not yet supported: IGNOREQUOTA, SIZE, PIPELINING. |
976b7e9f | 126 | |
a64a3dfa JH |
127 | 8. New expansion operators ${listnamed:name} to get the content of a named list |
128 | and ${listcount:string} to count the items in a list. | |
98a90c36 | 129 | |
2519e60d | 130 | 9. New global option "gnutls_allow_auto_pkcs11", defaults false. The GnuTLS |
a5f239e4 PP |
131 | rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11 |
132 | modules. For some situations this is desirable, but we expect admin in | |
133 | those situations to know they want the feature. More commonly, it means | |
134 | that GUI user modules get loaded and are broken by the setuid Exim being | |
135 | unable to access files specified in environment variables and passed | |
136 | through, thus breakage. So we explicitly inhibit the PKCS11 initialisation | |
137 | unless this new option is set. | |
138 | ||
2519e60d TL |
139 | Some older OS's with earlier versions of GnuTLS might not have pkcs11 ability, |
140 | so have also added a build option which can be used to build Exim with GnuTLS | |
141 | but without trying to use any kind of PKCS11 support. Uncomment this in the | |
142 | Local/Makefile: | |
143 | ||
144 | AVOID_GNUTLS_PKCS11=yes | |
145 | ||
3e8abda0 | 146 | 10. The "acl = name" condition on an ACL now supports optional arguments. |
bef3ea7f JH |
147 | New expansion item "${acl {name}{arg}...}" and expansion condition |
148 | "acl {{name}{arg}...}" are added. In all cases up to nine arguments | |
149 | can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL. | |
150 | Variable $acl_narg contains the number of arguments. If the ACL sets | |
151 | a "message =" value this becomes the result of the expansion item, | |
152 | or the value of $value for the expansion condition. If the ACL returns | |
153 | accept the expansion condition is true; if reject, false. A defer | |
154 | return results in a forced fail. | |
a5f239e4 | 155 | |
846726c5 JH |
156 | 11. Routers and transports can now have multiple headers_add and headers_remove |
157 | option lines. The concatenated list is used. | |
158 | ||
e7568d51 TL |
159 | 12. New ACL modifier "remove_header" can remove headers before message gets |
160 | handled by routers/transports. | |
161 | ||
3a796370 JH |
162 | 13. New dnsdb lookup pseudo-type "a+". A sequence of "a6" (if configured), |
163 | "aaaa" and "a" lookups is done and the full set of results returned. | |
164 | ||
362145b5 JH |
165 | 14. New expansion variable $headers_added with content from ACL add_header |
166 | modifier (but not yet added to messsage). | |
167 | ||
bd0fff00 | 168 | 15. New 8bitmime status logging option for received messages. Log field "M8S". |
3c0a92dc | 169 | |
c8e2fc1e JH |
170 | 16. New authenticated_sender logging option, adding to log field "A". |
171 | ||
181d9bf8 JH |
172 | 17. New expansion variables $router_name and $transport_name. Useful |
173 | particularly for debug_print as -bt commandline option does not | |
2a47f028 | 174 | require privilege whereas -d does. |
181d9bf8 | 175 | |
fd98a5c6 JH |
176 | 18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a |
177 | proposed extension to SMTP from Eric Hall. | |
178 | ||
700d22f3 PP |
179 | 19. The pipe transport has gained the force_command option, to allow |
180 | decorating commands from user .forward pipe aliases with prefix | |
181 | wrappers, for instance. | |
182 | ||
fcc8e047 JH |
183 | 20. Callout connections can now AUTH; the same controls as normal delivery |
184 | connections apply. | |
185 | ||
b1f37849 TL |
186 | 21. Support for DMARC, using opendmarc libs, can be enabled. It adds new |
187 | options: dmarc_forensic_sender, dmarc_history_file, and dmarc_tld_file. | |
188 | It adds new expansion variables $dmarc_ar_header, $dmarc_status, | |
189 | $dmarc_status_text, and $dmarc_used_domain. It adds a new acl modifier | |
190 | dmarc_status. It adds new control flags dmarc_disable_verify and | |
191 | dmarc_enable_forensic. | |
192 | ||
193 | 22. Add expansion variable $authenticated_fail_id, which is the username | |
194 | provided to the authentication method which failed. It is available | |
195 | for use in subsequent ACL processing (typically quit or notquit ACLs). | |
196 | ||
7142daca PP |
197 | 23. New ACL modifer "udpsend" can construct a UDP packet to send to a given |
198 | UDP host and port. | |
199 | ||
200 | 24. New ${hexquote:..string..} expansion operator converts non-printable | |
201 | characters in the string to \xNN form. | |
202 | ||
1a7b746d TL |
203 | 25. Experimental TPDA (Transport Post Delivery Action) function added. |
204 | Patch provided by Axel Rau. | |
205 | ||
4dd78911 TL |
206 | 26. Experimental Redis lookup added. Patch provided by Warren Baker. |
207 | ||
181d9bf8 | 208 | |
b1770b6e | 209 | Version 4.80 |
c1e794ba PP |
210 | ------------ |
211 | ||
212 | 1. New authenticator driver, "gsasl". Server-only (at present). | |
213 | This is a SASL interface, licensed under GPL, which can be found at | |
214 | http://www.gnu.org/software/gsasl/. | |
215 | This system does not provide sources of data for authentication, so | |
3b4f55a3 | 216 | careful use needs to be made of the conditions in Exim. |
c1e794ba | 217 | |
97753960 PP |
218 | 2. New authenticator driver, "heimdal_gssapi". Server-only. |
219 | A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME | |
220 | is no longer honoured for setuid programs by Heimdal. Use the | |
221 | "server_keytab" option to point to the keytab. | |
222 | ||
252e0c7b PP |
223 | 3. The "pkg-config" system can now be used when building Exim to reference |
224 | cflags and library information for lookups and authenticators, rather | |
225 | than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and | |
7e6a8985 PP |
226 | "LOOKUP_LIBS" directly. Similarly for handling the TLS library support |
227 | without adjusting "TLS_INCLUDE" and "TLS_LIBS". | |
252e0c7b | 228 | |
6a6084f8 PP |
229 | In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to |
230 | find the headers and libraries for PCRE. | |
231 | ||
f1e05cc7 | 232 | 4. New expansion variable $tls_bits. |
20aa9dbd | 233 | |
4a6a987a PP |
234 | 5. New lookup type, "dbmjz". Key is an Exim list, the elements of which will |
235 | be joined together with ASCII NUL characters to construct the key to pass | |
3b4f55a3 PP |
236 | into the DBM library. Can be used with gsasl to access sasldb2 files as |
237 | used by Cyrus SASL. | |
4a6a987a | 238 | |
da3ad30d PP |
239 | 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1. |
240 | ||
241 | Avoid release 1.0.1a if you can. Note that the default value of | |
242 | "openssl_options" is no longer "+dont_insert_empty_fragments", as that | |
243 | increased susceptibility to attack. This may still have interoperability | |
244 | implications for very old clients (see version 4.31 change 37) but | |
245 | administrators can choose to make the trade-off themselves and restore | |
246 | compatibility at the cost of session security. | |
247 | ||
7be682ca PP |
248 | 7. Use of the new expansion variable $tls_sni in the main configuration option |
249 | tls_certificate will cause Exim to re-expand the option, if the client | |
250 | sends the TLS Server Name Indication extension, to permit choosing a | |
251 | different certificate; tls_privatekey will also be re-expanded. You must | |
252 | still set these options to expand to valid files when $tls_sni is not set. | |
3f0945ff PP |
253 | |
254 | The SMTP Transport has gained the option tls_sni, which will set a hostname | |
255 | for outbound TLS sessions, and set $tls_sni too. | |
256 | ||
257 | A new log_selector, +tls_sni, has been added, to log received SNI values | |
258 | for Exim as a server. | |
259 | ||
9cbad13b PP |
260 | 8. The existing "accept_8bitmime" option now defaults to true. This means |
261 | that Exim is deliberately not strictly RFC compliant. We're following | |
262 | Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default. | |
263 | Those who disagree, or know that they are talking to mail servers that, | |
264 | even today, are not 8-bit clean, need to turn off this option. | |
265 | ||
9ee44efb PP |
266 | 9. Exim can now be started with -bw (with an optional timeout, given as |
267 | -bw<timespec>). With this, stdin at startup is a socket that is | |
268 | already listening for connections. This has a more modern name of | |
269 | "socket activation", but forcing the activated socket to fd 0. We're | |
270 | interested in adding more support for modern variants. | |
271 | ||
eae0036b | 272 | 10. ${eval } now uses 64-bit values on supporting platforms. A new "G" suffix |
97d17305 JH |
273 | for numbers indicates multiplication by 1024^3. |
274 | ||
17c76198 PP |
275 | 11. The GnuTLS support has been revamped; the three options gnutls_require_kx, |
276 | gnutls_require_mac & gnutls_require_protocols are no longer supported. | |
277 | tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority | |
278 | string, documentation for which is at: | |
42bfef1e | 279 | http://www.gnutls.org/manual/html_node/Priority-Strings.html |
17c76198 PP |
280 | |
281 | SNI support has been added to Exim's GnuTLS integration too. | |
282 | ||
af3498d6 PP |
283 | For sufficiently recent GnuTLS libraries, ${randint:..} will now use |
284 | gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness. | |
285 | ||
53947857 | 286 | 12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file |
3f7eeb86 PP |
287 | is now available. If the contents of the file are valid, then Exim will |
288 | send that back in response to a TLS status request; this is OCSP Stapling. | |
289 | Exim will not maintain the contents of the file in any way: administrators | |
290 | are responsible for ensuring that it is up-to-date. | |
291 | ||
292 | See "experimental-spec.txt" for more details. | |
293 | ||
eae0036b PP |
294 | 13. ${lookup dnsdb{ }} supports now SPF record types. They are handled |
295 | identically to TXT record lookups. | |
296 | ||
2605c55b | 297 | 14. New expansion variable $tod_epoch_l for higher-precision time. |
c1e794ba | 298 | |
3375e053 PP |
299 | 15. New global option tls_dh_max_bits, defaulting to current value of NSS |
300 | hard-coded limit of DH ephemeral bits, to fix interop problems caused by | |
301 | GnuTLS 2.12 library recommending a bit count higher than NSS supports. | |
302 | ||
a799883d PP |
303 | 16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier. |
304 | Option can now be a path or an identifier for a standard prime. | |
305 | If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23". | |
306 | Set to "historic" to get the old GnuTLS behaviour of auto-generated DH | |
307 | primes. | |
308 | ||
3ecab157 | 309 | 17. SSLv2 now disabled by default in OpenSSL. (Never supported by GnuTLS). |
f0f5a555 PP |
310 | Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL |
311 | install was not built with OPENSSL_NO_SSL2 ("no-ssl2"). | |
312 | ||
9e45c72b | 313 | |
3ce96ada TF |
314 | Version 4.77 |
315 | ------------ | |
316 | ||
317 | 1. New options for the ratelimit ACL condition: /count= and /unique=. | |
318 | The /noupdate option has been replaced by a /readonly option. | |
319 | ||
061b7ebd PP |
320 | 2. The SMTP transport's protocol option may now be set to "smtps", to |
321 | use SSL-on-connect outbound. | |
322 | ||
9e949f00 PP |
323 | 3. New variable $av_failed, set true if the AV scanner deferred; ie, when |
324 | there is a problem talking to the AV scanner, or the AV scanner running. | |
325 | ||
39257585 PP |
326 | 4. New expansion conditions, "inlist" and "inlisti", which take simple lists |
327 | and check if the search item is a member of the list. This does not | |
328 | support named lists, but does subject the list part to string expansion. | |
329 | ||
330 | 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was | |
331 | built, Exim no longer performs string expansion on the second string of | |
332 | the match_* expansion conditions: "match_address", "match_domain", | |
333 | "match_ip" & "match_local_part". Named lists can still be used. | |
334 | ||
7c6d71af | 335 | |
e97d1f08 PP |
336 | Version 4.76 |
337 | ------------ | |
338 | ||
339 | 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on | |
340 | or off in the resolver library. | |
341 | ||
342 | ||
bc19a55b PP |
343 | Version 4.75 |
344 | ------------ | |
345 | ||
346 | 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there | |
347 | is now LDAP/TLS support, given sufficiently modern OpenLDAP client | |
348 | libraries. The following global options have been added in support of | |
349 | this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key, | |
350 | ldap_cipher_suite, ldap_require_cert, ldap_start_tls. | |
351 | ||
2fe76745 PP |
352 | 2. The pipe transport now takes a boolean option, "freeze_signal", default |
353 | false. When true, if the external delivery command exits on a signal then | |
354 | Exim will freeze the message in the queue, instead of generating a bounce. | |
355 | ||
f1e5fef5 PP |
356 | 3. Log filenames may now use %M as an escape, instead of %D (still available). |
357 | The %M pattern expands to yyyymm, providing month-level resolution. | |
358 | ||
332f5cf3 PP |
359 | 4. The $message_linecount variable is now updated for the maildir_tag option, |
360 | in the same way as $message_size, to reflect the real number of lines, | |
361 | including any header additions or removals from transport. | |
362 | ||
29cfeb94 PP |
363 | 5. When contacting a pool of SpamAssassin servers configured in spamd_address, |
364 | Exim now selects entries randomly, to better scale in a cluster setup. | |
365 | ||
bc19a55b | 366 | |
a01ba081 PP |
367 | Version 4.74 |
368 | ------------ | |
369 | ||
1670ef10 PP |
370 | 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux) |
371 | the flaw permitted the Exim run-time user to cause root to append to | |
372 | arbitrary files of the attacker's choosing, with the content based | |
373 | on content supplied by the attacker. | |
374 | ||
375 | 2. Exim now supports loading some lookup types at run-time, using your | |
a01ba081 PP |
376 | platform's dlopen() functionality. This has limited platform support |
377 | and the intention is not to support every variant, it's limited to | |
378 | dlopen(). This permits the main Exim binary to not be linked against | |
379 | all the libraries needed for all the lookup types. | |
380 | ||
381 | ||
77bb000f PP |
382 | Version 4.73 |
383 | ------------ | |
384 | ||
2cfd3221 PP |
385 | NOTE: this version is not guaranteed backwards-compatible, please read the |
386 | items below carefully | |
387 | ||
77bb000f PP |
388 | 1. A new main configuration option, "openssl_options", is available if Exim |
389 | is built with SSL support provided by OpenSSL. The option allows | |
390 | administrators to specify OpenSSL options to be used on connections; | |
391 | typically this is to set bug compatibility features which the OpenSSL | |
392 | developers have not enabled by default. There may be security | |
393 | consequences for certain options, so these should not be changed | |
394 | frivolously. | |
395 | ||
a29e5231 PP |
396 | 2. A new pipe transport option, "permit_coredumps", may help with problem |
397 | diagnosis in some scenarios. Note that Exim is typically installed as | |
398 | a setuid binary, which on most OSes will inhibit coredumps by default, | |
43236f35 | 399 | so that safety mechanism would have to be overridden for this option to |
a29e5231 PP |
400 | be able to take effect. |
401 | ||
8544e77a PP |
402 | 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless |
403 | Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes | |
404 | Note that this switches Exim to use a new API ("INSTREAM") and a future | |
405 | release of ClamAV will remove support for the old API ("STREAM"). | |
406 | ||
407 | The av_scanner option, when set to "clamd", now takes an optional third | |
408 | part, "local", which causes Exim to pass a filename to ClamAV instead of | |
409 | the file content. This is the same behaviour as when clamd is pointed at | |
410 | a Unix-domain socket. For example: | |
411 | ||
412 | av_scanner = clamd:192.0.2.3 1234:local | |
413 | ||
491fab4c PP |
414 | ClamAV's ExtendedDetectionInfo response format is now handled. |
415 | ||
8544e77a PP |
416 | 4. There is now a -bmalware option, restricted to admin users. This option |
417 | takes one parameter, a filename, and scans that file with Exim's | |
418 | malware-scanning framework. This is intended purely as a debugging aid | |
419 | to ensure that Exim's scanning is working, not to replace other tools. | |
a9622bc6 PP |
420 | Note that the ACL framework is not invoked, so if av_scanner references |
421 | ACL variables without a fallback then this will fail. | |
8544e77a | 422 | |
83e029d5 PP |
423 | 5. There is a new expansion operator, "reverse_ip", which will reverse IP |
424 | addresses; IPv4 into dotted quad, IPv6 into dotted nibble. Examples: | |
425 | ||
426 | ${reverse_ip:192.0.2.4} | |
427 | -> 4.2.0.192 | |
428 | ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3} | |
429 | -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2 | |
430 | ||
ed7f7860 PP |
431 | 6. There is a new ACL control called "debug", to enable debug logging. |
432 | This allows selective logging of certain incoming transactions within | |
433 | production environments, with some care. It takes two options, "tag" | |
434 | and "opts"; "tag" is included in the filename of the log and "opts" | |
435 | is used as per the -d<options> command-line option. Examples, which | |
436 | don't all make sense in all contexts: | |
437 | ||
438 | control = debug | |
439 | control = debug/tag=.$sender_host_address | |
440 | control = debug/opts=+expand+acl | |
441 | control = debug/tag=.$message_exim_id/opts=+expand | |
442 | ||
10385c15 PP |
443 | 7. It has always been implicit in the design and the documentation that |
444 | "the Exim user" is not root. src/EDITME said that using root was | |
445 | "very strongly discouraged". This is not enough to keep people from | |
446 | shooting themselves in the foot in days when many don't configure Exim | |
447 | themselves but via package build managers. The security consequences of | |
448 | running various bits of network code are severe if there should be bugs in | |
449 | them. As such, the Exim user may no longer be root. If configured | |
450 | statically, Exim will refuse to build. If configured as ref:user then Exim | |
451 | will exit shortly after start-up. If you must shoot yourself in the foot, | |
452 | then henceforth you will have to maintain your own local patches to strip | |
453 | the safeties off. | |
454 | ||
06a6f4ed | 455 | 8. There is a new expansion condition, bool_lax{}. Where bool{} uses the ACL |
6a8de854 PP |
456 | condition logic to determine truth/failure and will fail to expand many |
457 | strings, bool_lax{} uses the router condition logic, where most strings | |
458 | do evaluate true. | |
459 | Note: bool{00} is false, bool_lax{00} is true. | |
460 | ||
06a6f4ed | 461 | 9. Routers now support multiple "condition" tests. |
532be449 | 462 | |
5dc43717 JJ |
463 | 10. There is now a runtime configuration option "tcp_wrappers_daemon_name". |
464 | Setting this allows an admin to define which entry in the tcpwrappers | |
465 | config file will be used to control access to the daemon. This option | |
466 | is only available when Exim is built with USE_TCP_WRAPPERS. The | |
467 | default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME | |
468 | build option. | |
469 | ||
79d4bc3d PP |
470 | 11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now |
471 | the Exim run-time user, instead of root. | |
472 | ||
2cfd3221 PP |
473 | 12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and |
474 | is forced on. This is mitigated by the new build option | |
90b6341f | 475 | TRUSTED_CONFIG_LIST which defines a list of configuration files which |
7f7f0545 DW |
476 | are trusted; one per line. If a config file is owned by root and matches |
477 | a pathname in the list, then it may be invoked by the Exim build-time | |
478 | user without Exim relinquishing root privileges. | |
2cfd3221 PP |
479 | |
480 | 13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically | |
481 | trusted to supply -D<Macro[=Value]> overrides on the command-line. Going | |
90b6341f DW |
482 | forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that |
483 | include the main config. As a transition mechanism, we are temporarily | |
484 | providing a work-around: the new build option WHITELIST_D_MACROS provides | |
43236f35 | 485 | a colon-separated list of macro names which may be overridden by the Exim |
90b6341f DW |
486 | run-time user. The values of these macros are constrained to the regex |
487 | ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values). | |
2cfd3221 | 488 | |
77bb000f | 489 | |
3fc596e4 NM |
490 | Version 4.72 |
491 | ------------ | |
492 | ||
b26eacf1 PP |
493 | 1. TWO SECURITY FIXES: one relating to mail-spools which are globally |
494 | writable, the other to locking of MBX folders (not mbox). | |
495 | ||
496 | 2. MySQL stored procedures are now supported. | |
497 | ||
498 | 3. The dkim_domain transport option is now a list, not a single string, and | |
499 | messages will be signed for each element in the list (discarding | |
500 | duplicates). | |
501 | ||
502 | 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups | |
503 | in the presence of multiple character strings within the RR. Prior to 4.70, | |
504 | only the first string would be returned. The dnsdb lookup now, by default, | |
505 | preserves the pre-4.70 semantics, but also now takes an extended output | |
8f425947 PP |
506 | separator specification. The separator can be followed by a semicolon, to |
507 | concatenate the individual text strings together with no join character, | |
508 | or by a comma and a second separator character, in which case the text | |
509 | strings within a TXT record are joined on that second character. | |
510 | Administrators are reminded that DNS provides no ordering guarantees | |
511 | between multiple records in an RRset. For example: | |
b26eacf1 PP |
512 | |
513 | foo.example. IN TXT "a" "b" "c" | |
514 | foo.example. IN TXT "d" "e" "f" | |
515 | ||
516 | ${lookup dnsdb{>/ txt=foo.example}} -> "a/d" | |
517 | ${lookup dnsdb{>/; txt=foo.example}} -> "def/abc" | |
8f425947 | 518 | ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f" |
b26eacf1 | 519 | |
3fc596e4 | 520 | |
f33253cc NM |
521 | Version 4.70 / 4.71 |
522 | ------------------- | |
65a7d8c3 | 523 | |
7c6d71af | 524 | 1. Native DKIM support without an external library. |
a8c8d6b5 JJ |
525 | (Note that if no action to prevent it is taken, a straight upgrade will |
526 | result in DKIM verification of all signed incoming emails. See spec | |
527 | for details on conditionally disabling) | |
7c6d71af NM |
528 | |
529 | 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha). | |
65a7d8c3 | 530 | |
f33253cc | 531 | 3. There is now a bool{} expansion condition which maps certain strings to |
7d9f747b | 532 | true/false condition values (most likely of use in conjunction with the |
f33253cc NM |
533 | and{} expansion operator). |
534 | ||
535 | 4. The $spam_score, $spam_bar and $spam_report variables are now available | |
536 | at delivery time. | |
537 | ||
538 | 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as | |
539 | options, provided that Exim is invoked by an admin_user. | |
540 | ||
541 | 6. There is a new option gnutls_compat_mode, when linked against GnuTLS, | |
542 | which increases compatibility with older clients at the cost of decreased | |
543 | security. Don't set this unless you need to support such clients. | |
544 | ||
545 | 7. There is a new expansion operator, ${randint:...} which will produce a | |
546 | "random" number less than the supplied integer. This randomness is | |
547 | not guaranteed to be cryptographically strong, but depending upon how | |
548 | Exim was built may be better than the most naive schemes. | |
549 | ||
550 | 8. Exim now explicitly ensures that SHA256 is available when linked against | |
551 | OpenSSL. | |
552 | ||
553 | 9. The transport_filter_timeout option now applies to SMTP transports too. | |
554 | ||
65a7d8c3 | 555 | |
7d9f747b PP |
556 | Version 4.69 |
557 | ------------ | |
558 | ||
559 | 1. Preliminary DKIM support in Experimental. | |
560 | ||
561 | ||
2b85bce7 PH |
562 | Version 4.68 |
563 | ------------ | |
564 | ||
565 | 1. The body_linecount and body_zerocount C variables are now exported in the | |
566 | local_scan API. | |
567 | ||
93655c46 PH |
568 | 2. When a dnslists lookup succeeds, the key that was looked up is now placed |
569 | in $dnslist_matched. When the key is an IP address, it is not reversed in | |
570 | this variable (though it is, of course, in the actual lookup). In simple | |
571 | cases, for example: | |
572 | ||
573 | deny dnslists = spamhaus.example | |
574 | ||
575 | the key is also available in another variable (in this case, | |
576 | $sender_host_address). In more complicated cases, however, this is not | |
577 | true. For example, using a data lookup might generate a dnslists lookup | |
578 | like this: | |
579 | ||
580 | deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|... | |
581 | ||
582 | If this condition succeeds, the value in $dnslist_matched might be | |
583 | 192.168.6.7 (for example). | |
584 | ||
6c512171 PH |
585 | 3. Authenticators now have a client_condition option. When Exim is running as |
586 | a client, it skips an authenticator whose client_condition expansion yields | |
587 | "0", "no", or "false". This can be used, for example, to skip plain text | |
588 | authenticators when the connection is not encrypted by a setting such as: | |
589 | ||
590 | client_condition = ${if !eq{$tls_cipher}{}} | |
591 | ||
592 | Note that the 4.67 documentation states that $tls_cipher contains the | |
593 | cipher used for incoming messages. In fact, during SMTP delivery, it | |
594 | contains the cipher used for the delivery. The same is true for | |
595 | $tls_peerdn. | |
596 | ||
a96603a0 PH |
597 | 4. There is now a -Mvc <message-id> option, which outputs a copy of the |
598 | message to the standard output, in RFC 2822 format. The option can be used | |
599 | only by an admin user. | |
600 | ||
8f240103 PH |
601 | 5. There is now a /noupdate option for the ratelimit ACL condition. It |
602 | computes the rate and checks the limit as normal, but it does not update | |
603 | the saved data. This means that, in relevant ACLs, it is possible to lookup | |
604 | the existence of a specified (or auto-generated) ratelimit key without | |
605 | incrementing the ratelimit counter for that key. | |
606 | ||
607 | In order for this to be useful, another ACL entry must set the rate | |
608 | for the same key somewhere (otherwise it will always be zero). | |
609 | ||
610 | Example: | |
611 | ||
612 | acl_check_connect: | |
613 | # Read the rate; if it doesn't exist or is below the maximum | |
614 | # we update it below | |
615 | deny ratelimit = 100 / 5m / strict / noupdate | |
616 | log_message = RATE: $sender_rate / $sender_rate_period \ | |
617 | (max $sender_rate_limit) | |
618 | ||
619 | [... some other logic and tests...] | |
620 | ||
621 | warn ratelimit = 100 / 5m / strict / per_cmd | |
622 | log_message = RATE UPDATE: $sender_rate / $sender_rate_period \ | |
623 | (max $sender_rate_limit) | |
624 | condition = ${if le{$sender_rate}{$sender_rate_limit}} | |
625 | ||
626 | accept | |
627 | ||
d677b2f2 PH |
628 | 6. The variable $max_received_linelength contains the number of bytes in the |
629 | longest line that was received as part of the message, not counting the | |
630 | line termination character(s). | |
631 | ||
d52120f2 PH |
632 | 7. Host lists can now include +ignore_defer and +include_defer, analagous to |
633 | +ignore_unknown and +include_unknown. These options should be used with | |
634 | care, probably only in non-critical host lists such as whitelists. | |
635 | ||
8669f003 PH |
636 | 8. There's a new option called queue_only_load_latch, which defaults true. |
637 | If set false when queue_only_load is greater than zero, Exim re-evaluates | |
638 | the load for each incoming message in an SMTP session. Otherwise, once one | |
639 | message is queued, the remainder are also. | |
640 | ||
4f054c63 | 641 | 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most |
8f128379 PH |
642 | cases when an SMTP session ends without sending QUIT. However, when Exim |
643 | itself is is bad trouble, such as being unable to write to its log files, | |
644 | this ACL is not run, because it might try to do things (such as write to | |
645 | log files) that make the situation even worse. | |
646 | ||
647 | Like the QUIT ACL, this new ACL is provided to make it possible to gather | |
648 | statistics. Whatever it returns (accept or deny) is immaterial. The "delay" | |
649 | modifier is forbidden in this ACL. | |
650 | ||
651 | When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set | |
652 | to a string that indicates the reason for the termination of the SMTP | |
653 | connection. The possible values are: | |
654 | ||
655 | acl-drop Another ACL issued a "drop" command | |
656 | bad-commands Too many unknown or non-mail commands | |
657 | command-timeout Timeout while reading SMTP commands | |
658 | connection-lost The SMTP connection has been lost | |
659 | data-timeout Timeout while reading message data | |
660 | local-scan-error The local_scan() function crashed | |
661 | local-scan-timeout The local_scan() function timed out | |
662 | signal-exit SIGTERM or SIGINT | |
663 | synchronization-error SMTP synchronization error | |
664 | tls-failed TLS failed to start | |
665 | ||
666 | In most cases when an SMTP connection is closed without having received | |
667 | QUIT, Exim sends an SMTP response message before actually closing the | |
668 | connection. With the exception of acl-drop, the default message can be | |
669 | overridden by the "message" modifier in the NOTQUIT ACL. In the case of a | |
670 | "drop" verb in another ACL, it is the message from the other ACL that is | |
671 | used. | |
672 | ||
b7670459 PH |
673 | 10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of |
674 | servers with individual queries. This is done by starting the query with | |
675 | "servers=x:y:z;", where each item in the list may take one of two forms: | |
676 | ||
677 | (1) If it is just a host name, the appropriate global option (mysql_servers | |
678 | or pgsql_servers) is searched for a host of the same name, and the | |
679 | remaining parameters (database, user, password) are taken from there. | |
680 | ||
681 | (2) If it contains any slashes, it is taken as a complete parameter set. | |
682 | ||
683 | The list of servers is used in exactly the same was as the global list. | |
684 | Once a connection to a server has happened and a query has been | |
685 | successfully executed, processing of the lookup ceases. | |
686 | ||
687 | This feature is intended for use in master/slave situations where updates | |
688 | are occurring, and one wants to update a master rather than a slave. If the | |
689 | masters are in the list for reading, you might have: | |
690 | ||
691 | mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw | |
692 | ||
693 | In an updating lookup, you could then write | |
694 | ||
695 | ${lookup mysql{servers=master; UPDATE ...} | |
696 | ||
697 | If, on the other hand, the master is not to be used for reading lookups: | |
698 | ||
699 | pgsql_servers = slave1/db/name/pw:slave2/db/name/pw | |
700 | ||
701 | you can still update the master by | |
702 | ||
703 | ${lookup pgsql{servers=master/db/name/pw; UPDATE ...} | |
704 | ||
ddea74fa PH |
705 | 11. The message_body_newlines option (default FALSE, for backwards |
706 | compatibility) can be used to control whether newlines are present in | |
707 | $message_body and $message_body_end. If it is FALSE, they are replaced by | |
708 | spaces. | |
709 | ||
2b85bce7 | 710 | |
b4ed4da0 PH |
711 | Version 4.67 |
712 | ------------ | |
713 | ||
714 | 1. There is a new log selector called smtp_no_mail, which is not included in | |
715 | the default setting. When it is set, a line is written to the main log | |
716 | whenever an accepted SMTP connection terminates without having issued a | |
4aa45c31 | 717 | MAIL command. |
b4ed4da0 | 718 | |
431b7361 | 719 | 2. When an item in a dnslists list is followed by = and & and a list of IP |
4aa45c31 PH |
720 | addresses, the behaviour was not clear when the lookup returned more than |
721 | one IP address. This has been solved by the addition of == and =& for "all" | |
93655c46 | 722 | rather than the default "any" matching. |
431b7361 | 723 | |
4aa45c31 PH |
724 | 3. Up till now, the only control over which cipher suites GnuTLS uses has been |
725 | for the cipher algorithms. New options have been added to allow some of the | |
726 | other parameters to be varied. | |
431b7361 | 727 | |
4aa45c31 PH |
728 | 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is |
729 | set, Exim compiles a runtime option called disable_fsync. | |
431b7361 | 730 | |
4aa45c31 | 731 | 5. There is a new variable called $smtp_count_at_connection_start. |
431b7361 | 732 | |
4aa45c31 | 733 | 6. There's a new control called no_pipelining. |
cf8b11a5 | 734 | |
41c7c167 | 735 | 7. There are two new variables called $sending_ip_address and $sending_port. |
4aa45c31 | 736 | These are set whenever an SMTP connection to another host has been set up. |
41c7c167 PH |
737 | |
738 | 8. The expansion of the helo_data option in the smtp transport now happens | |
4aa45c31 | 739 | after the connection to the server has been made. |
41c7c167 | 740 | |
9c57cbc0 | 741 | 9. There is a new expansion operator ${rfc2047d: that decodes strings that |
4aa45c31 | 742 | are encoded as per RFC 2047. |
9c57cbc0 | 743 | |
f3f065bb PH |
744 | 10. There is a new log selector called "pid", which causes the current process |
745 | id to be added to every log line, in square brackets, immediately after the | |
746 | time and date. | |
747 | ||
047bdd8c | 748 | 11. Exim has been modified so that it flushes SMTP output before implementing |
4c590bd1 PH |
749 | a delay in an ACL. It also flushes the output before performing a callout, |
750 | as this can take a substantial time. These behaviours can be disabled by | |
751 | obeying control = no_delay_flush or control = no_callout_flush, | |
4aa45c31 | 752 | respectively, at some earlier stage of the connection. |
047bdd8c | 753 | |
0ce9abe6 | 754 | 12. There are two new expansion conditions that iterate over a list. They are |
4aa45c31 | 755 | called forany and forall. |
0ce9abe6 | 756 | |
0e22dfd1 PH |
757 | 13. There's a new global option called dsn_from that can be used to vary the |
758 | contents of From: lines in bounces and other automatically generated | |
759 | messages ("delivery status notifications" - hence the name of the option). | |
0e22dfd1 | 760 | |
4aa45c31 | 761 | 14. The smtp transport has a new option called hosts_avoid_pipelining. |
c51b8e75 | 762 | |
75b1493f | 763 | 15. By default, exigrep does case-insensitive matches. There is now a -I option |
4aa45c31 | 764 | that makes it case-sensitive. |
29f89cad | 765 | |
4aa45c31 PH |
766 | 16. A number of new features ("addresses", "map", "filter", and "reduce") have |
767 | been added to string expansions to make it easier to process lists of | |
768 | items, typically addresses. | |
29f89cad | 769 | |
c3611384 PH |
770 | 17. There's a new ACL modifier called "continue". It does nothing of itself, |
771 | and processing of the ACL always continues with the next condition or | |
772 | modifier. It is provided so that the side effects of expanding its argument | |
4aa45c31 | 773 | can be used. |
c3611384 | 774 | |
ec95d1a6 | 775 | 18. It is now possible to use newline and other control characters (those with |
4aa45c31 | 776 | values less than 32, plus DEL) as separators in lists. |
ec95d1a6 | 777 | |
b2d5182b PH |
778 | 19. The exigrep utility now has a -v option, which inverts the matching |
779 | condition. | |
780 | ||
c456d9bb | 781 | 20. The host_find_failed option in the manualroute router can now be set to |
4aa45c31 | 782 | "ignore". |
c456d9bb | 783 | |
b4ed4da0 PH |
784 | |
785 | Version 4.66 | |
786 | ------------ | |
787 | ||
788 | No new features were added to 4.66. | |
789 | ||
790 | ||
791 | Version 4.65 | |
792 | ------------ | |
793 | ||
794 | No new features were added to 4.65. | |
795 | ||
38a0a95f PH |
796 | |
797 | Version 4.64 | |
798 | ------------ | |
799 | ||
af561417 PH |
800 | 1. ACL variables can now be given arbitrary names, as long as they start with |
801 | "acl_c" or "acl_m" (for connection variables and message variables), are at | |
802 | least six characters long, with the sixth character being either a digit or | |
883335dc | 803 | an underscore. |
af561417 PH |
804 | |
805 | 2. There is a new ACL modifier called log_reject_target. It makes it possible | |
883335dc | 806 | to specify which logs are used for messages about ACL rejections. |
af561417 PH |
807 | |
808 | 3. There is a new authenticator called "dovecot". This is an interface to the | |
809 | authentication facility of the Dovecot POP/IMAP server, which can support a | |
883335dc | 810 | number of authentication methods. |
af561417 PH |
811 | |
812 | 4. The variable $message_headers_raw provides a concatenation of all the | |
813 | messages's headers without any decoding. This is in contrast to | |
814 | $message_headers, which does RFC2047 decoding on the header contents. | |
815 | ||
883335dc PH |
816 | 5. In a DNS black list, if two domain names, comma-separated, are given, the |
817 | second is used first to do an initial check, making use of any IP value | |
818 | restrictions that are set. If there is a match, the first domain is used, | |
819 | without any IP value restrictions, to get the TXT record. | |
af561417 | 820 | |
883335dc | 821 | 6. All authenticators now have a server_condition option. |
af561417 PH |
822 | |
823 | 7. There is a new command-line option called -Mset. It is useful only in | |
824 | conjunction with -be (that is, when testing string expansions). It must be | |
825 | followed by a message id; Exim loads the given message from its spool | |
883335dc | 826 | before doing the expansions. |
af561417 PH |
827 | |
828 | 8. Another similar new command-line option is called -bem. It operates like | |
883335dc PH |
829 | -be except that it must be followed by the name of a file that contains a |
830 | message. | |
af561417 PH |
831 | |
832 | 9. When an address is delayed because of a 4xx response to a RCPT command, it | |
833 | is now the combination of sender and recipient that is delayed in | |
883335dc | 834 | subsequent queue runs until its retry time is reached. |
af561417 PH |
835 | |
836 | 10. Unary negation and the bitwise logical operators and, or, xor, not, and | |
883335dc | 837 | shift, have been added to the eval: and eval10: expansion items. |
48c7f9e2 | 838 | |
194cc0e4 PH |
839 | 11. The variables $interface_address and $interface_port have been renamed |
840 | as $received_ip_address and $received_port, to make it clear that they | |
841 | relate to message reception rather than delivery. (The old names remain | |
842 | available for compatibility.) | |
843 | ||
883335dc PH |
844 | 12. The "message" modifier can now be used on "accept" and "discard" acl verbs |
845 | to vary the message that is sent when an SMTP command is accepted. | |
4e88a19f | 846 | |
495ae4b0 | 847 | |
4608d683 PH |
848 | Version 4.63 |
849 | ------------ | |
850 | ||
851 | 1. There is a new Boolean option called filter_prepend_home for the redirect | |
38a0a95f | 852 | router. |
4608d683 | 853 | |
45b91596 PH |
854 | 2. There is a new acl, set by acl_not_smtp_start, which is run right at the |
855 | start of receiving a non-SMTP message, before any of the message has been | |
38a0a95f | 856 | read. |
45b91596 | 857 | |
a5bd321b PH |
858 | 3. When an SMTP error message is specified in a "message" modifier in an ACL, |
859 | or in a :fail: or :defer: message in a redirect router, Exim now checks the | |
38a0a95f | 860 | start of the message for an SMTP error code. |
a5bd321b | 861 | |
6ec97b1b | 862 | 4. There is a new parameter for LDAP lookups called "referrals", which takes |
38a0a95f | 863 | one of the settings "follow" (the default) or "nofollow". |
6ec97b1b | 864 | |
e22ca4ac JJ |
865 | 5. Version 20070721.2 of exipick now included, offering these new options: |
866 | --reverse | |
867 | After all other sorting options have bee processed, reverse order | |
868 | before displaying messages (-R is synonym). | |
869 | --random | |
870 | Randomize order of matching messages before displaying. | |
871 | --size | |
872 | Instead of displaying the matching messages, display the sum | |
873 | of their sizes. | |
874 | --sort <variable>[,<variable>...] | |
875 | Before displaying matching messages, sort the messages according to | |
876 | each messages value for each variable. | |
877 | --not | |
878 | Negate the value for every test (returns inverse output from the | |
879 | same criteria without --not). | |
880 | ||
4608d683 | 881 | |
1cce3af8 PH |
882 | Version 4.62 |
883 | ------------ | |
884 | ||
885 | 1. The ${readsocket expansion item now supports Internet domain sockets as well | |
886 | as Unix domain sockets. If the first argument begins "inet:", it must be of | |
887 | the form "inet:host:port". The port is mandatory; it may be a number or the | |
888 | name of a TCP port in /etc/services. The host may be a name, or it may be an | |
889 | IP address. An ip address may optionally be enclosed in square brackets. | |
890 | This is best for IPv6 addresses. For example: | |
891 | ||
892 | ${readsocket{inet:[::1]:1234}{<request data>}... | |
893 | ||
894 | Only a single host name may be given, but if looking it up yield more than | |
895 | one IP address, they are each tried in turn until a connection is made. Once | |
896 | a connection has been made, the behaviour is as for ${readsocket with a Unix | |
897 | domain socket. | |
898 | ||
f7fd3850 PH |
899 | 2. If a redirect router sets up file or pipe deliveries for more than one |
900 | incoming address, and the relevant transport has batch_max set greater than | |
901 | one, a batch delivery now occurs. | |
902 | ||
d6629cdc PH |
903 | 3. The appendfile transport has a new option called maildirfolder_create_regex. |
904 | Its value is a regular expression. For a maildir delivery, this is matched | |
905 | against the maildir directory; if it matches, Exim ensures that a | |
906 | maildirfolder file is created alongside the new, cur, and tmp directories. | |
907 | ||
1cce3af8 | 908 | |
7e66e54d PH |
909 | Version 4.61 |
910 | ------------ | |
911 | ||
4f578862 PH |
912 | The documentation is up-to-date for the 4.61 release. Major new features since |
913 | the 4.60 release are: | |
914 | ||
915 | . An option called disable_ipv6, to disable the use of IPv6 completely. | |
916 | ||
917 | . An increase in the number of ACL variables to 20 of each type. | |
918 | ||
919 | . A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1, | |
920 | $2, $3, (though those are still set) because the numeric variables get used | |
921 | for other things in complicated expansions. | |
922 | ||
843a41e8 | 923 | . The default for rfc1413_query_timeout has been changed from 30s to 5s. |
4f578862 PH |
924 | |
925 | . It is possible to use setclassresources() on some BSD OS to control the | |
926 | resources used in pipe deliveries. | |
927 | ||
928 | . A new ACL modifier called add_header, which can be used with any verb. | |
929 | ||
930 | . More errors are detectable in retry rules. | |
931 | ||
932 | There are a number of other additions too. | |
71fafd95 | 933 | |
7e66e54d | 934 | |
425ae40f | 935 | Version 4.60 |
b5aea5e1 PH |
936 | ------------ |
937 | ||
425ae40f PH |
938 | The documentation is up-to-date for the 4.60 release. Major new features since |
939 | the 4.50 release are: | |
1a46a8c5 | 940 | |
425ae40f | 941 | . Support for SQLite. |
1a46a8c5 | 942 | |
425ae40f | 943 | . Support for IGNOREQUOTA in LMTP. |
1a46a8c5 | 944 | |
425ae40f | 945 | . Extensions to the "submission mode" features. |
1a46a8c5 | 946 | |
425ae40f | 947 | . Support for Client SMTP Authorization (CSA). |
1a46a8c5 | 948 | |
425ae40f | 949 | . Support for ratelimiting hosts and users. |
b5aea5e1 | 950 | |
425ae40f | 951 | . New expansion items to help with the BATV "prvs" scheme. |
b5aea5e1 | 952 | |
425ae40f | 953 | . A "match_ip" condition, that matches an IP address against a list. |
35edf2ff | 954 | |
425ae40f | 955 | There are many more minor changes. |
495ae4b0 PH |
956 | |
957 | **** |