Commit | Line | Data |
---|---|---|
2c7db3f5 | 1 | $Cambridge: exim/doc/doc-txt/NewStuff,v 1.7 2004/11/05 16:53:28 ph10 Exp $ |
495ae4b0 PH |
2 | |
3 | New Features in Exim | |
4 | -------------------- | |
5 | ||
6 | This file contains descriptions of new features that have been added to Exim, | |
7 | but have not yet made it into the main manual (which is most conveniently | |
8 | updated when there is a relatively large batch of changes). The doc/ChangeLog | |
9 | file contains a listing of all changes, including bug fixes. | |
10 | ||
11 | ||
35edf2ff PH |
12 | Version 4.44 |
13 | ------------ | |
14 | ||
15 | 1. There is a new build-time option called CONFIGURE_GROUP which works like | |
16 | CONFIGURE_OWNER. It specifies one additional group that is permitted for | |
17 | the runtime configuration file when the group write permission is set. | |
18 | ||
69358f02 PH |
19 | 2. The "control=submission" facility has a new option /retain_sender. This |
20 | has the effect of setting local_sender_retain true and local_from_check | |
21 | false for the incoming message in which it is encountered. | |
22 | ||
5131419f PH |
23 | 3. $recipients is now available in the predata ACL (oversight). |
24 | ||
25 | 4. The value of address_data from a sender verification is now available in | |
26 | $sender_address_data in subsequent conditions in the ACL statement. Note: | |
27 | this is just like $address_data. The value does not persist after the end | |
28 | of the current ACL statement. If you want to preserve it, you can use one | |
29 | of the ACL variables. | |
30 | ||
23c7ff99 PH |
31 | 5. The redirect router has two new options: forbid_sieve_filter and |
32 | forbid_exim_filter. When filtering is enabled by allow_filter, these | |
33 | options control which type(s) of filtering are permitted. By default, both | |
34 | Exim and Sieve filters are allowed. | |
35 | ||
4deaf07d PH |
36 | 6. A new option for callouts makes it possible to set a different (usually |
37 | smaller) timeout for making the SMTP connection. The keyword is "connect". | |
38 | For example: | |
39 | ||
40 | verify = sender/callout=5s,connect=1s | |
41 | ||
42 | If not specified, it defaults to the general timeout value. | |
43 | ||
2c7db3f5 PH |
44 | 7. The new variables $sender_verify_failure and $recipient_verify_failure |
45 | contain information about exactly what failed. In an ACL, after one of | |
46 | these failures, the relevant variable contains one of the following words: | |
47 | ||
48 | qualify the address was unqualified (no domain), and the message | |
49 | was neither local nor came from an exempted host; | |
50 | ||
51 | route routing failed; | |
52 | ||
53 | mail routing succeeded, and a callout was attempted; rejection | |
54 | occurred at or before the MAIL command (that is, on initial | |
55 | connection, HELO, or MAIL); | |
56 | ||
57 | recipient the RCPT command in a callout was rejected; | |
58 | ||
59 | postmaster the postmaster check in a callout was rejected. | |
60 | ||
61 | The main use of these variables is expected to be to distinguish between | |
62 | rejections of MAIL and rejections of RCPT. | |
63 | ||
64 | ||
35edf2ff | 65 | |
495ae4b0 PH |
66 | Version 4.43 |
67 | ------------ | |
68 | ||
69 | 1. There is a new Boolean global option called mua_wrapper, defaulting false. | |
70 | This causes Exim to run an a restricted mode, in order to provide a very | |
71 | specific service. | |
72 | ||
73 | Background: On a personal computer, it is a common requirement for all | |
74 | email to be sent to a smarthost. There are plenty of MUAs that can be | |
75 | configured to operate that way, for all the popular operating systems. | |
76 | However, there are MUAs for Unix-like systems that cannot be so configured: | |
77 | they submit messages using the command line interface of | |
78 | /usr/sbin/sendmail. In addition, utility programs such as cron submit | |
79 | messages this way. | |
80 | ||
81 | Requirement: The requirement is for something that can provide the | |
82 | /usr/sbin/sendmail interface and deliver messages to a smarthost, but not | |
83 | provide any queueing or retrying facilities. Furthermore, the delivery to | |
84 | the smarthost should be synchronous, so that if it fails, the sending MUA | |
85 | is immediately informed. In other words, we want something that in effect | |
86 | converts a command-line MUA into a TCP/SMTP MUA. | |
87 | ||
88 | Solutions: There are a number of applications (for example, ssmtp) that do | |
89 | this job. However, people have found them to be lacking in various ways. | |
90 | For instance, some sites want to allow aliasing and forwarding before | |
91 | sending to the smarthost. | |
92 | ||
93 | Using Exim: Exim already had the necessary infrastructure for doing this | |
94 | job. Just a few tweaks were needed to make it behave as required, though it | |
95 | is somewhat of an overkill to use a fully-featured MTA for this purpose. | |
96 | ||
97 | Setting mua_wrapper=true causes Exim to run in a special mode where it | |
98 | assumes that it is being used to "wrap" a command-line MUA in the manner | |
99 | just described. | |
100 | ||
101 | If you set mua_wrapper=true, you also need to provide a compatible router | |
102 | and transport configuration. Typically there will be just one router and | |
103 | one transport, sending everything to a smarthost. | |
104 | ||
105 | When run in MUA wrapping mode, the behaviour of Exim changes in the | |
106 | following ways: | |
107 | ||
108 | (a) A daemon cannot be run, nor will Exim accept incoming messages from | |
109 | inetd. In other words, the only way to submit messages is via the | |
110 | command line. | |
111 | ||
112 | (b) Each message is synchonously delivered as soon as it is received (-odi | |
113 | is assumed). All queueing options (queue_only, queue_smtp_domains, | |
114 | control=queue, control=freeze in an ACL etc.) are quietly ignored. The | |
115 | Exim reception process does not finish until the delivery attempt is | |
116 | complete. If the delivery was successful, a zero return code is given. | |
117 | ||
118 | (c) Address redirection is permitted, but the final routing for all | |
119 | addresses must be to the same remote transport, and to the same list of | |
120 | hosts. Furthermore, the return_address must be the same for all | |
121 | recipients, as must any added or deleted header lines. In other words, | |
122 | it must be possible to deliver the message in a single SMTP | |
123 | transaction, however many recipients there are. | |
124 | ||
125 | (d) If the conditions in (c) are not met, or if routing any address results | |
126 | in a failure or defer status, or if Exim is unable to deliver all the | |
127 | recipients successfully to one of the hosts immediately, delivery of | |
128 | the entire message fails. | |
129 | ||
130 | (e) Because no queueing is allowed, all failures are treated as permanent; | |
131 | there is no distinction between 4xx and 5xx SMTP response codes from | |
132 | the smarthost. Furthermore, because only a single yes/no response can | |
133 | be given to the caller, it is not possible to deliver to some | |
134 | recipients and not others. If there is an error (temporary or | |
135 | permanent) for any recipient, all are failed. | |
136 | ||
137 | (f) If more than one host is listed, Exim will try another host after a | |
138 | connection failure or a timeout, in the normal way. However, if this | |
139 | kind of failure happens for all the hosts, the delivery fails. | |
140 | ||
141 | (g) When delivery fails, an error message is written to the standard error | |
142 | stream (as well as to Exim's log), and Exim exits to the caller with a | |
143 | return code value 1. The message is expunged from Exim's spool files. | |
144 | No bounce messages are ever generated. | |
145 | ||
146 | (h) No retry data is maintained, and any retry rules are ignored. | |
147 | ||
148 | (i) A number of Exim options are overridden: deliver_drop_privilege is | |
149 | forced true, max_rcpt in the smtp transport is forced to "unlimited", | |
150 | remote_max_parallel is forced to one, and fallback hosts are ignored. | |
151 | ||
152 | The overall effect is that Exim makes a single synchronous attempt to | |
153 | deliver the message, failing if there is any kind of problem. Because no | |
154 | local deliveries are done and no daemon can be run, Exim does not need root | |
155 | privilege. It should be possible to run it setuid=exim instead of | |
156 | setuid=root. See section 48.3 in the 4.40 manual for a general discussion | |
157 | about the advantages and disadvantages of running without root privilege. | |
158 | ||
159 | 2. There have been problems with DNS servers when SRV records are looked up. | |
160 | Some mis-behaving servers return a DNS error or timeout when a non-existent | |
161 | SRV record is sought. Similar problems have in the past been reported for | |
162 | MX records. The global dns_again_means_nonexist option can help with this | |
163 | problem, but it is heavy-handed because it is a global option. There are | |
164 | now two new options for the dnslookup router. They are called | |
165 | srv_fail_domains and mx_fail_domains. In each case, the value is a domain | |
166 | list. If an attempt to look up an SRV or MX record results in a DNS failure | |
167 | or "try again" response, and the domain matches the relevant list, Exim | |
168 | behaves as if the DNS had responded "no such record". In the case of an SRV | |
169 | lookup, this means that the router proceeds to look for MX records; in the | |
170 | case of an MX lookup, it proceeds to look for A or AAAA records, unless the | |
171 | domain matches mx_domains. | |
172 | ||
173 | 3. The following functions are now available in the local_scan() API: | |
174 | ||
175 | (a) void header_remove(int occurrence, uschar *name) | |
176 | ||
177 | This function removes header lines. If "occurrence" is zero or negative, | |
178 | all occurrences of the header are removed. If occurrence is greater | |
179 | than zero, that particular instance of the header is removed. If no | |
180 | header(s) can be found that match the specification, the function does | |
181 | nothing. | |
182 | ||
183 | (b) BOOL header_testname(header_line *hdr, uschar *name, int length, | |
184 | BOOL notdel) | |
185 | ||
186 | This function tests whether the given header has the given name. It | |
187 | is not just a string comparison, because whitespace is permitted | |
188 | between the name and the colon. If the "notdel" argument is TRUE, a | |
189 | FALSE return is forced for all "deleted" headers; otherwise they are | |
190 | not treated specially. For example: | |
191 | ||
192 | if (header_testname(h, US"X-Spam", 6, TRUE)) ... | |
193 | ||
194 | (c) void header_add_at_position(BOOL after, uschar *name, BOOL topnot, | |
195 | int type, char *format, ...) | |
196 | ||
197 | This function adds a new header line at a specified point in the header | |
198 | chain. If "name" is NULL, the new header is added at the end of the | |
199 | chain if "after" is TRUE, or at the start if "after" is FALSE. If | |
200 | "name" is not NULL, the headers are searched for the first non-deleted | |
201 | header that matches the name. If one is found, the new header is added | |
202 | before it if "after" is FALSE. If "after" is true, the new header is | |
203 | added after the found header and any adjacent subsequent ones with the | |
204 | same name (even if marked "deleted"). If no matching non-deleted header | |
205 | is found, the "topnot" option controls where the header is added. If it | |
206 | is TRUE, addition is at the top; otherwise at the bottom. Thus, to add | |
207 | a header after all the Received: headers, or at the top if there are no | |
208 | Received: headers, you could use | |
209 | ||
210 | header_add_at_position(TRUE, US"Received", TRUE, ' ', "X-xxx: ..."); | |
211 | ||
212 | Normally, there is always at least one non-deleted Received: header, | |
213 | but there may not be if received_header_text expands to an empty | |
214 | string. | |
215 | ||
216 | (d) BOOL receive_remove_recipient(uschar *recipient) | |
217 | ||
218 | This is a convenience function to remove a named recipient from the | |
219 | list of recipients. It returns TRUE if a recipient was removed, and | |
220 | FALSE if no matching recipient could be found. The argument must be a | |
221 | complete email address. | |
222 | ||
223 | 4. When an ACL "warn" statement adds one or more header lines to a message, | |
224 | they are added at the end of the existing header lines by default. It is | |
225 | now possible to specify that any particular header line should be added | |
226 | right at the start (before all the Received: lines) or immediately after | |
227 | the first block of Received: lines in the message. This is done by | |
228 | specifying :at_start: or :after_received: (or, for completeness, :at_end:) | |
229 | before the text of the header line. (Header text cannot start with a colon, | |
230 | as there has to be a header name first.) For example: | |
231 | ||
232 | warn message = :after_received:X-My-Header: something or other... | |
233 | ||
234 | If more than one header is supplied in a single warn statement, each one is | |
235 | treated independently and can therefore be placed differently. If you add | |
236 | more than one line at the start, or after the Received: block, they will | |
237 | end up in reverse order. | |
238 | ||
239 | Warning: This facility currently applies only to header lines that are | |
240 | added in an ACL. It does NOT work for header lines that are added in a | |
241 | system filter or in a router or transport. | |
242 | ||
243 | 5. There is now a new error code that can be used in retry rules. Its name is | |
244 | "rcpt_4xx", and there are three forms. A literal "rcpt_4xx" matches any 4xx | |
245 | error received for an outgoing SMTP RCPT command; alternatively, either the | |
246 | first or both of the x's can be given as digits, for example: "rcpt_45x" or | |
247 | "rcpt_436". If you want (say) to recognize 452 errors given to RCPT | |
248 | commands by a particular host, and have only a one-hour retry for them, you | |
249 | can set up a retry rule of this form: | |
250 | ||
251 | the.host.name rcpt_452 F,1h,10m | |
252 | ||
253 | Naturally, this rule must come before any others that would match. | |
254 | ||
255 | These new errors apply to both outgoing SMTP (the smtp transport) and | |
256 | outgoing LMTP (either the lmtp transport, or the smtp transport in LMTP | |
257 | mode). Note, however, that they apply only to responses to RCPT commands. | |
258 | ||
259 | 6. The "postmaster" option of the callout feature of address verification has | |
260 | been extended to make it possible to use a non-empty MAIL FROM address when | |
261 | checking a postmaster address. The new suboption is called "postmaster_ | |
262 | mailfrom", and you use it like this: | |
263 | ||
264 | require verify = sender/callout=postmaster_mailfrom=abc@x.y.z | |
265 | ||
266 | Providing this suboption causes the postmaster check to be done using the | |
267 | given address. The original "postmaster" option is equivalent to | |
268 | ||
269 | require verify = sender/callout=postmaster_mailfrom= | |
270 | ||
271 | If both suboptions are present, the rightmost one overrides. | |
272 | ||
273 | Important notes: | |
274 | ||
275 | (1) If you use a non-empty sender address for postmaster checking, there is | |
276 | the likelihood that the remote host will itself initiate a callout | |
277 | check back to your host to check that address. As this is a "normal" | |
278 | callout check, the sender will most probably be empty, thus avoiding | |
279 | possible callout loops. However, to be on the safe side it would be | |
280 | best to set up your own ACLs so that they do not do sender verification | |
281 | checks when the recipient is the address you use for postmaster callout | |
282 | checking. | |
283 | ||
284 | (2) The caching arrangements for postmaster checking do NOT take account of | |
285 | the sender address. It is assumed that either the empty address, or a | |
286 | fixed non-empty address will be used. All that Exim remembers is that | |
287 | the postmaster check for the domain succeeded or failed. | |
288 | ||
289 | 7. When verifying addresses in header lines using the verify=header_sender | |
290 | option, Exim behaves by default as if the addresses are envelope sender | |
291 | addresses from a message. Callout verification therefore tests to see | |
292 | whether a bounce message could be delivered, by using an empty address in | |
293 | the MAIL FROM command. However, it is arguable that these addresses might | |
294 | never be used as envelope senders, and could therefore justifiably reject | |
295 | bounce messages (empty senders). There is now an additional callout option | |
296 | for verify=header_sender that allows you to specify what address to use in | |
297 | the MAIL FROM command. You use it as in this example: | |
298 | ||
299 | require verify = header_sender/callout=mailfrom=abcd@x.y.z | |
300 | ||
301 | Important notes: | |
302 | ||
303 | (1) As in the case of postmaster_mailfrom (see above), you should think | |
304 | about possible loops. | |
305 | ||
306 | (2) In this case, as in the case of recipient callouts with non-empty | |
307 | senders (the use_sender option), caching is done on the basis of a | |
308 | recipient/sender pair. | |
309 | ||
310 | 8. If you build Exim with USE_READLINE=yes in Local/Makefile, it will try to | |
311 | load libreadline dynamically whenever the -be (test expansion) option is | |
312 | used without command line arguments. If successful, it will then use | |
313 | readline() for reading the test data. A line history is supported. By the | |
314 | time Exim does this, it is running as the calling user, so this should not | |
315 | cause any security problems. Security is the reason why this is NOT | |
316 | supported for -bt or -bv, when Exim is running as root or exim, | |
317 | respectively. Note that this option adds to the size of the Exim binary, | |
318 | because the dynamic loading library is not otherwise included. On my | |
319 | desktop it adds about 2.5K. You may need to add -ldl to EXTRA_LIBS when you | |
320 | set USE_READLINE=yes. | |
321 | ||
322 | 9. Added ${str2b64:<string>} to the expansion operators. This operator | |
323 | converts an arbitrary string into one that is base64 encoded. | |
324 | ||
325 | 10. A new authenticator, called cyrus_sasl, has been added. This requires | |
326 | the presence of the Cyrus SASL library; it authenticates by calling this | |
327 | library, which supports a number of authentication mechanisms, including | |
328 | PLAIN and LOGIN, but also several others that Exim does not support | |
329 | directly. The code for this authenticator was provided by Matthew | |
330 | Byng-Maddick of A L Digital Ltd (http://www.aldigital.co.uk). Here follows | |
331 | draft documentation: | |
332 | ||
333 | xx. THE CYRUS_SASL AUTHENTICATOR | |
334 | ||
335 | The cyrus_sasl authenticator provides server support for the Cyrus library | |
336 | Implementation of the RFC 2222 "Simple Authentication and Security Layer". | |
337 | It provides a gatewaying mechanism directly to the Cyrus interface, so if | |
338 | your Cyrus library can do, for example, CRAM-MD5, then so can the | |
339 | cyrus_sasl authenticator. By default it uses the public name of the driver | |
340 | to determine which mechanism to support. | |
341 | ||
342 | Where access to some kind of secret file is required, for example in GSSAPI | |
343 | or CRAM-MD5, it is worth noting that the authenticator runs as the exim | |
344 | user, and that the Cyrus SASL library has no way of escalating privileges | |
345 | by default. You may also find you need to set environment variables, | |
346 | depending on the driver you are using. | |
347 | ||
348 | xx.1 Using cyrus_sasl as a server | |
349 | ||
350 | The cyrus_sasl authenticator has four private options. It puts the username | |
351 | (on a successful authentication) into $1. | |
352 | ||
353 | server_hostname Type: string* Default: $primary_hostname | |
354 | ||
355 | This option selects the hostname that is used when communicating with | |
356 | the library. It is up to the underlying SASL plug-in what it does with | |
357 | this data. | |
358 | ||
359 | server_mech Type: string Default: public_name | |
360 | ||
361 | This option selects the authentication mechanism this driver should | |
362 | use. It allows you to use a different underlying mechanism from the | |
363 | advertised name. For example: | |
364 | ||
365 | sasl: | |
366 | driver = cyrus_sasl | |
367 | public_name = X-ANYTHING | |
368 | server_mech = CRAM-MD5 | |
369 | server_set_id = $1 | |
370 | ||
371 | server_realm Type: string Default: unset | |
372 | ||
373 | This is the SASL realm that the server is claiming to be in. | |
374 | ||
375 | server_service Type: string Default: "smtp" | |
376 | ||
377 | This is the SASL service that the server claims to implement. | |
378 | ||
379 | For straigthforward cases, you do not need to set any of the | |
380 | authenticator's private options. All you need to do is to specify an | |
381 | appropriate mechanism as the public name. Thus, if you have a SASL library | |
382 | that supports CRAM-MD5 and PLAIN, you might have two authenticators as | |
383 | follows: | |
384 | ||
385 | sasl_cram_md5: | |
386 | driver = cyrus_sasl | |
387 | public_name = CRAM-MD5 | |
388 | server_set_id = $1 | |
389 | ||
390 | sasl_plain: | |
391 | driver = cyrus_sasl | |
392 | public_name = PLAIN | |
393 | server_set_id = $1 | |
394 | ||
395 | 11. There is a new global option called tls_on_connect_ports. Its value must be | |
396 | a list of port numbers; the most common use is expected to be | |
397 | ||
398 | tls_on_connect_ports = 465 | |
399 | ||
400 | Setting this option has the same effect as -tls-on-connect on the command | |
401 | line, but only for the specified ports. It applies to all connections, both | |
402 | via the daemon and via inetd. You still need to specify all the ports for | |
403 | the daemon (using daemon_smtp_ports or local_interfaces or the -X command | |
404 | line option) because this option does not add an extra port -- rather, it | |
405 | specifies different behaviour on a port that is defined elsewhere. The | |
406 | -tls-on-connect command line option overrides tls_on_connect_ports, and | |
407 | forces tls-on-connect for all ports. | |
408 | ||
409 | 12. There is a new ACL that is run when a DATA command is received, before the | |
410 | data itself is received. The ACL is defined by acl_smtp_predata. (Compare | |
411 | acl_smtp_data, which is run after the data has been received.) | |
412 | This new ACL allows a negative response to be given to the DATA command | |
413 | itself. Header lines added by MAIL or RCPT ACLs are not visible at this | |
414 | time, but any that are defined here are visible when the acl_smtp_data ACL | |
415 | is run. | |
416 | ||
417 | 13. The "control=submission" ACL modifier has an option "/domain=xxx" which | |
418 | specifies the domain to be used when creating From: or Sender: lines using | |
419 | the authenticated id as a local part. If the option is supplied with an | |
420 | empty domain, that is, just "/domain=", Exim assumes that the authenticated | |
421 | id is a complete email address, and it uses it as is when creating From: | |
422 | or Sender: lines. | |
423 | ||
424 | 14. It is now possible to make retry rules that apply only when the failing | |
425 | message has a specific sender. In particular, this can be used to define | |
426 | retry rules that apply only to bounce messages. The syntax is to add a new | |
427 | third item to a retry rule, of the form "senders=<address list>". The retry | |
428 | timings themselves then become the fourth item. For example: | |
429 | ||
430 | * * senders=: F,1h,30m | |
431 | ||
432 | would match all bounce messages. If the address list contains white space, | |
433 | it must be enclosed in quotes. For example: | |
434 | ||
435 | a.domain timeout senders="x@b.dom : y@c.dom" G,8h,10m,1.5 | |
436 | ||
437 | When testing retry rules using -brt, you can supply a sender using the -f | |
438 | command line option, like this: | |
439 | ||
440 | exim -f "" -brt user@dom.ain | |
441 | ||
442 | If you do not set -f with -brt, a retry rule that contains a senders list | |
443 | will never be matched. | |
444 | ||
445 | 15. Two new control modifiers have been added to ACLs: "control = enforce_sync" | |
446 | and "control = no_enforce_sync". This makes it possible to be selective | |
447 | about when SMTP synchronization is enforced. The global option | |
448 | smtp_enforce_sync now specifies the default state of the switch. These | |
449 | controls can appear in any ACL, but the most obvious place to put them is | |
450 | in the ACL defined by acl_smtp_connect, which is run at the start of an | |
451 | incoming SMTP connection, before the first synchronization check. | |
452 | ||
453 | 16. Another two new control modifiers are "control = caseful_local_part" and | |
454 | "control = caselower_local_part". These are permitted only in the ACL | |
455 | specified by acl_smtp_rcpt (i.e. during RCPT processing). By default, the | |
456 | contents of $local_part are lower cased before ACL processing. | |
457 | After "control = caseful_local_part", any uppercase letters in the original | |
458 | local part are restored in $local_part for the rest of the ACL, or until | |
459 | "control = caselower_local_part" is encountered. However, this applies only | |
460 | to local part handling that takes place directly in the ACL (for example, | |
461 | as a key in lookups). If a "verify = recipient" test is obeyed, the | |
462 | case-related handling of the local part during the verification is | |
463 | controlled by the router configuration (see the caseful_local_part generic | |
464 | router option). | |
465 | ||
466 | This facility could be used, for example, to add a spam score to local | |
467 | parts containing upper case letters. For example, using $acl_m4 to | |
468 | accumulate the spam score: | |
469 | ||
470 | warn control = caseful_local_part | |
471 | set acl_m4 = ${eval:\ | |
472 | $acl_m4 + \ | |
473 | ${if match{$local_part}{[A-Z]}{1}{0}}\ | |
474 | } | |
475 | control = caselower_local_part | |
476 | ||
477 | Notice that we put back the lower cased version afterwards, assuming that | |
478 | is what is wanted for subsequent tests. | |
479 | ||
480 | 17. The option hosts_connection_nolog is provided so that certain hosts can be | |
481 | excepted from logging when the +smtp_connection log selector is set. For | |
482 | example, you might want not to log SMTP connections from local processes, | |
483 | or from 127.0.0.1, or from your local LAN. The option is a host list with | |
484 | an unset default. Because it is consulted in the main loop of the daemon, | |
485 | you should strive to restrict its value to a short inline list of IP | |
486 | addresses and networks. To disable logging SMTP connections from local | |
487 | processes, you must create a host list with an empty item. For example: | |
488 | ||
489 | hosts_connection_nolog = : | |
490 | ||
491 | If the +smtp_connection log selector is not set, this option has no effect. | |
492 | ||
493 | 18. There is now an acl called acl_smtp_quit, which is run for the QUIT | |
494 | command. The outcome of the ACL does not affect the response code to QUIT, | |
495 | which is always 221. Thus, the ACL does not in fact control any access. | |
496 | For this reason, the only verbs that are permitted are "accept" and "warn". | |
497 | ||
498 | The ACL can be used for tasks such as custom logging at the end of an SMTP | |
499 | session. For example, you can use ACL variables in other ACLs to count | |
500 | messages, recipients, etc., and log the totals at QUIT time using one or | |
501 | more "logwrite" modifiers on a "warn" command. | |
502 | ||
503 | You do not need to have a final "accept", but if you do, you can use a | |
504 | "message" modifier to specify custom text that is sent as part of the 221 | |
505 | response. | |
506 | ||
507 | This ACL is run only for a "normal" QUIT. For certain kinds of disastrous | |
508 | failure (for example, failure to open a log file, or when Exim is bombing | |
509 | out because it has detected an unrecoverable error), all SMTP commands | |
510 | from the client are given temporary error responses until QUIT is received | |
511 | or the connection is closed. In these special cases, the ACL is not run. | |
512 | ||
513 | 19. The appendfile transport has two new options, mailbox_size and mailbox_ | |
514 | filecount. If either these options are set, it is expanded, and the result | |
515 | is taken as the current size of the mailbox or the number of files in the | |
516 | mailbox, respectively. This makes it possible to use some external means of | |
517 | maintaining the data about the size of a mailbox for enforcing quota | |
518 | limits. The result of expanding these option values must be a decimal | |
519 | number, optionally followed by "K" or "M". | |
520 | ||
521 | 20. It seems that there are broken clients in use that cannot handle multiline | |
522 | SMTP responses. Can't people who implement these braindead programs read? | |
523 | RFC 821 mentions multiline responses, and it is over 20 years old. They | |
524 | must handle multiline responses for EHLO, or do they still use HELO? | |
525 | Anyway, here is YAWFAB (yet another workaround for asinine brokenness). | |
526 | There's a new ACL switch that can be set by | |
527 | ||
528 | control = no_multiline_responses | |
529 | ||
530 | If this is set, it suppresses multiline SMTP responses from ACL rejections. | |
531 | One way of doing this would have been just to put out these responses as | |
532 | one long line. However, RFC 2821 specifies a maximum of 512 bytes per | |
533 | response ("use multiline responses for more" it says), and some of the | |
534 | responses might get close to that. So I have implemented this by doing two | |
535 | very easy things: | |
536 | ||
537 | (1) Extra information that is normally output as part of a rejection | |
538 | caused by sender verification failure is omitted. Only the final line | |
539 | (typically "sender verification failed") is now sent. | |
540 | ||
541 | (2) If a "message" modifier supplies a multiline response, only the first | |
542 | line is output. | |
543 | ||
544 | The setting of the switch can, of course, be made conditional on the | |
545 | calling host. | |
546 | ||
547 | 21. There is now support for the libradius library that comes with FreeBSD. | |
548 | This is an alternative to the radiusclient library that Exim already | |
549 | supports. To use the FreeBSD library, you need to set | |
550 | ||
551 | RADIUS_LIB_TYPE=RADLIB | |
552 | ||
553 | in Local/Makefile, in addition to RADIUS_CONFIGURE_FILE, and you probably | |
554 | also need -libradius in EXTRALIBS. | |
555 | ||
556 | ||
557 | Version 4.42 | |
558 | ------------ | |
559 | ||
560 | 1. The "personal" filter test is brought up-to-date with recommendations from | |
561 | the Sieve specification: (a) The list of non-personal From: addresses now | |
562 | includes "listserv", "majordomo", and "*-request"; (b) If the message | |
563 | contains any header line starting with "List=-" it is treated as | |
564 | non-personal. | |
565 | ||
566 | 2. The Sieve functionality has been extended to support the "copy" and | |
567 | "vacation" extensions, and comparison tests. | |
568 | ||
569 | 3. There is now an overall timeout for performing a callout verification. It | |
570 | defaults to 4 times the callout timeout, which applies to individual SMTP | |
571 | commands during the callout. The overall timeout applies when there is more | |
572 | than one host that can be tried. The timeout is checked before trying the | |
573 | next host. This prevents very long delays if there are a large number of | |
574 | hosts and all are timing out (e.g. when the network connections are timing | |
575 | out). The value of the overall timeout can be changed by specifying an | |
576 | additional sub-option for "callout", called "maxwait". For example: | |
577 | ||
578 | verify = sender/callout=5s,maxwait=20s | |
579 | ||
580 | 4. Changes to the "personal" filter test: | |
581 | ||
582 | (1) The list of non-personal local parts in From: addresses has been | |
583 | extended to include "listserv", "majordomo", "*-request", and "owner-*", | |
584 | taken from the Sieve specification recommendations. | |
585 | ||
586 | (2) If the message contains any header line starting with "List-" it is | |
587 | treated as non-personal. | |
588 | ||
589 | (3) The test for "circular" in the Subject: header line has been removed | |
590 | because it now seems ill-conceived. | |
591 | ||
592 | 5. The autoreply transport has a new option called never_mail. This is an | |
593 | address list. If any run of the transport creates a message with a | |
594 | recipient that matches any item in the list, that recipient is quietly | |
595 | discarded. If all recipients are discarded, no message is created. | |
596 | ||
597 | ||
598 | Version 4.40 | |
599 | ------------ | |
600 | ||
601 | The documentation is up-to-date for the 4.40 release. What follows here is a | |
602 | brief list of the new features that have been added since 4.30. | |
603 | ||
604 | 1. log_incoming_interface affects more log lines. | |
605 | ||
606 | 2. New ACL modifier "control = submission". | |
607 | ||
608 | 3. CONFIGURE_OWNER can be set at build time to define an alternative owner for | |
609 | the configuration file, in addition to root and exim. | |
610 | ||
611 | 4. Added expansion variables $body_zerocount, $recipient_data, and | |
612 | $sender_data. | |
613 | ||
614 | 5. The time of last modification of the "new" subdirectory is now used as the | |
615 | "mailbox time last read" when there is a quota error for a maildir | |
616 | delivery. | |
617 | ||
618 | 6. The special item "+ignore_unknown" may now appear in host lists. | |
619 | ||
620 | 7. The special domain-matching patterns @mx_any, @mx_primary, and | |
621 | @mx_secondary can now be followed by "/ignore=<ip list>". | |
622 | ||
623 | 8. New expansion conditions: match_domain, match_address, match_local_part, | |
624 | lt, lti, le, lei, gt, gti, ge, and new expansion operators time_interval, | |
625 | eval10, and base62d. | |
626 | ||
627 | 9. New lookup type called "iplsearch". | |
628 | ||
629 | 10. New log selectors ident_timeout, tls_certificate_verified, queue_time, | |
630 | deliver_time, outgoing_port, return_path_on_delivery. | |
631 | ||
632 | 11. New global options smtp_active_hostname and tls_require_ciphers. | |
633 | ||
634 | 12. Exinext has -C and -D options. | |
635 | ||
636 | 13. "domainlist_cache" forces caching of an apparently variable list. | |
637 | ||
638 | 14. For compatibility with Sendmail, the command line option -prval:sval | |
639 | is equivalent to -oMr rval -oMs sval. | |
640 | ||
641 | 15. New callout options use_sender and use_postmaster for use when verifying | |
642 | recipients. | |
643 | ||
644 | 16. John Jetmore's "exipick" utility has been added to the distribution. | |
645 | ||
646 | 17. The TLS code now supports CRLs. | |
647 | ||
648 | 18. The dnslookup router and the dnsdb lookup type now support the use of SRV | |
649 | records. | |
650 | ||
651 | 19. The redirect router has a new option called qualify_domain. | |
652 | ||
653 | 20. exigrep's output now also includes lines that are not related to any | |
654 | particular message, but which do match the pattern. | |
655 | ||
656 | 21. New global option write_rejectlog. If it is set false, Exim no longer | |
657 | writes anything to the reject log. | |
658 | ||
659 | **** |