Make verify=helo do the verification on the fly it if was not done
[exim.git] / doc / doc-txt / ChangeLog
d7b47fd0 1$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.196 2005/08/02 15:19:20 ph10 Exp $
3Change log file for Exim from version 4.21
6Exim version 4.53
9TK/01 Added the "success_on_redirect" address verification option. See
10 NewStuff for rationale and an example.
12PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
14PH/02 Patch to exigrep to allow it to work on syslog lines.
16PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
17 fread() to skip over the body file's header line, because in Cygwin the
18 header line is locked and is inaccessible.
20PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
21 co-exist for some time) to make it clear that it is the Exim ID that is
22 referenced, not the Message-ID: header line.
24PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
25 string_format() function, because snprintf() does not exist on all
26 operating systems.
28PH/06 The use of forbid_filter_existstest now also locks out the use of the
29 ${stat: expansion item.
31PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
32 protocol synchronization error", to keep the pedants happy.
34PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
35 well as for IRIX systems, when gcc is being used. See the host.c source
36 file for comments.
38PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
40PH/10 Named domain lists were not working if used in a queue_smtp_domains
41 setting.
43PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
44 transport and to the smtp transport in LMTP mode.
46TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
48PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
49 run a filter in a subprocess. This could lead to confusion in subsequent
50 lookups in the parent process. There should also be a search_tidyup() at
51 the end of the subprocess.
53PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
54 only if the host matched helo_try_verify_hosts, which caused the
55 verification to occur when the EHLO/HELO command was issued. The ACL just
56 tested the remembered result. Now, if a previous verification attempt has
57 not happened, "verify = helo" does it there and then.
bbe902f0 59
60Exim version 4.52
63TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
65PH/01 When a transport filter timed out in a pipe delivery, and the pipe
66 command itself ended in error, the underlying message about the transport
67 filter timeout was being overwritten with the pipe command error. Now the
68 underlying error message should be appended to the second error message.
70TK/01 Fix poll() being unavailable on Mac OSX 10.2.
72PH/02 Reduce the amount of output that "make" produces by default. Full output
73 can still be requested.
75PH/03 The warning log line about a condition test deferring for a "warn" verb
76 was being output only once per connection, rather than after each
77 occurrence (because it was using the same function as for successful
78 "warn" verbs). This seems wrong, so I have changed it.
80TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
81 it should not have, which might have caused a crash in the right
82 circumstances, but probably never did.
84PH/04 Installed a modified version of Tony Finch's patch to make submission
85 mode fix the return path as well as the Sender: header line, and to
86 add a /name= option so that you can make the user's friendly name appear
87 in the header line.
89TF/03 Added the control = fakedefer ACL modifier.
91TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
92 Mark Lowes for thorough testing.
870f6ba8 93
94TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
96TK/03 Merged latest SRS patch from Miles Wilton.
98PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
99 with the definition in sysexits.h (which is #included earlier).
100 Fortunately, Exim does not actually use EX_OK. The code used to try to
101 preserve the sysexits.h value, by assumimg that macro definitions were
102 scanned for macro replacements. I have been disabused of this notion,
103 so now the code just undefines EX_OK before #including unistd.h.
11d337a4 104
105PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
106 in the smtp transport. When a block could not be written in a single
107 write() function, the timeout was being re-applied to each part-write.
108 This seems wrong - if the receiver was accepting one byte at a time it
109 would take for ever. The timeout is now adjusted when this happens. It
110 doesn't have to be particularly precise.
112TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
113 details. Thanks to Chris Webb <> for the patch!
115PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
116 without a domain if the check to <postmaster@domain> fails.
118SC/01 Eximstats: added -xls and the ability to specify output files
119 (patch written by Frank Heydlauf).
121SC/02 Eximstats: use FileHandles for outputing results.
123SC/03 Eximstats: allow any combination of xls, txt, and html output.
125SC/04 Eximstats: fixed display of large numbers with -nvr option
127SC/05 Eximstats: fixed merging of reports with empty tables.
129SC/06 Eximstats: added the -include_original_destination flag
131SC/07 Eximstats: removed tabs and trailing whitespace.
133TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
135TK/06 MBOX spool code: Add real "From " MBOX separator line
136 so the .eml file is really in mbox format (even though
137 most programs do not really care). Patch from Alex Miller.
139TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
140 The latter is generated from $received_to and is only set if the
141 message has one envelope recipient. SA can use these headers,
142 obviously out-of-the-box. Patch from Alex Miller.
144PH/08 The ${def test on a variable was returning false if the variable's
145 value was "0", contrary to what the specification has always said!
146 The result should be true unless the variable is empty.
148PH/09 The syntax error of a character other than { following "${if
149 def:variable_name" (after optional whitespace) was not being diagnosed.
150 An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
151 accidental colon was present, for example, could give incorrect results.
153PH/10 Tidied the code in a number of places where the st_size field of a stat()
154 result is used (not including appendfile, where other changes are about
155 to be made).
157PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
158 This involved changing a lot of size variables from int to off_t. It
159 should work with maildirs and everything.
161TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
162 spamd dying while we are connected to it.
164TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
165 <>
167PH/12 Applied Alex Kiernan's patch for the API change for the error callback
168 function for BDB 4.3.
170PH/13 Changed auto_thaw such that it does not apply to bounce messages.
172PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
173 the sources for PCRE have been re-arranged and more files are now
174 involved.
176PH/15 The code I had for printing potentially long long variables in PH/11
177 above was not the best (it lost precision). The length of off_t variables
178 is now inspected at build time, and an appropriate printing format (%ld
179 or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
180 to be "long long int" or "long int". This is needed for the internal
181 formatting function string_vformat().
b1c749bb 182
183PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
184 the configuration file to be ":syslog", then the script "guesses" where
185 the logs files are, rather than using the compiled in default. In our
186 case the guess is not the same as the compiled default, so the script
187 suddenly stopped working when I started to use syslog. The patch checks
188 to see if log_file_path is "". If so, it attempts to read it from exim
189 with no configuration file to get the compiled in version, before it
190 falls back to the previous guessing code."
192TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
193 implementing BATV in an Exim configuration. See NewStuff for the gory
194 details.
196PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
197 Makefile that are specific to HP-UX.
199PH/18 If the "use_postmaster" option was set for a recipient callout together
200 with the "random" option, the postmaster address was used as the MAIL
201 FROM address for the random test, but not for the subsequent recipient
202 test. It is now used for both.
204PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
205 patch removes a few documentation additions to RFC 3028, because the
206 latest draft now contains them. It adds the new en;ascii-case comparator
207 and a new error check for 8bit text in MIME parts. Comparator and
208 require names are now matched exactly. I enabled the subaddress
209 extension, but it is not well tested yet (read: it works for me)."
211PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
212 rework some of the code of TK/09 above to avoid the hardwired use of
213 "%lld" and "long long". Replaced the call to snprintf() with a call to
214 string_vformat().
216PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
217 records point to non-existent hosts", "retry timeout exceeded", and
218 "retry time not reached for any host after a long failure period".
ca02eafb 219
220PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
221 experimental DomainKeys support:
223 (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
224 (2) On an error such as an illegally used "control", the wrong name for
225 the control was given.
227 These problems did NOT occur unless DomainKeys support was compiled.
229PH/23 Added daemon_startup_retries and daemon_startup_sleep.
231PH/24 Added ${if match_ip condition.
233PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
234 databases so that it will be absolutely obvious if a crash occurs in the
235 DB library. This is a regular occurrence (often caused by mis-matched
236 db.h files).
ff790e47 238PH/26 Insert a lot of missing (void) casts for functions such as chown(),
239 chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
240 picked up on a user's system that detects such things. There doesn't seem
241 to be a gcc warning option for this - only an attribute that has to be
242 put on the function's prototype. It seems that in Fedora Core 4 they have
243 set this on a number of new functions. No doubt there will be more in due
244 course.
ff790e47 245
246PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
247 specify a transport. However, if an address that was verified by such a
248 router was the subject of a callout, Exim crashed because it tried to
249 read the rcpt_include_affixes from the non-existent transport. Now it
250 just assumes that the setting of that option is false. This bug was
251 introduced by 4.51/PH/31.
253PH/28 Changed -d+all to exclude +memory, because that information is very
254 rarely of interest, but it makes the output a lot bigger. People tend to
255 do -d+all out of habit.
257PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
258 code in os-type was giving problems when lives in lib64, like on
259 x86_64 Fedora Core.
261PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
262 aren't the modern standard, and it seems that some systems' include files
263 don't always have them. Exim was already checking for some of the newer
264 ones like T_AAAA, and defining it itself. I've added checks for all the
265 record types that Exim uses.
267PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
268 not automatically generating a new one, as it is supposed to. This
269 prevented TLS from working. If the file did exist, but contained invalid
270 data, a new version was generated, as expected. It was only the case of a
271 non-existent file that was broken.
273TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
274 with a change in libdomainkeys > 0.64.
276TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
277 from DNS. If the selector record carries the flag, it now has
278 precedence over the domain-wide flag.
280TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
282PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
283 the use of a port name that isn't defined in /etc/services) occurred, the
284 message was deferred as in a normal delivery, and thus remained on the
285 spool, instead of being failed because of the mua_wrapper setting. This
286 is now fixed, and I tidied up some of the mua_wrapper messages at the
287 same time.
289SC/08 Eximstats: whilst parsing the mainlog(s), store information about
290 the messages in a hash of arrays rather than using individual hashes.
291 This is a bit cleaner and results in dramatic memory savings, albeit
292 at a slight CPU cost.
294SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
295 as requested by Marc Sherman.
297SC/10 Eximstats: added histograms for user specified patterns as requested
298 by Marc Sherman.
300SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
302PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
303 fopen() in the content-scanning modules that did not already have it.
e7ad8a65 305
306Exim version 4.51
309TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
310 doc/experimental-spec.txt for details. (
2f079f46 312TK/02 Fix ACL "control" statement not being available in MIME ACL.
314TK/03 Fix ACL "regex" condition not being available in MIME ACL.
316PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
317 to test Sieve filters that use "vacation".
319PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
320 that changes the way the GnuTLS parameters are stored in the cache file.
321 The new format can be generated externally. For backward compatibility,
322 if the data in the cache doesn't make sense, Exim assumes it has read an
323 old-format file, and it generates new data and writes a new file. This
324 means that you can't go back to an older release without removing the
325 file.
327PH/03 A redirect router that has both "unseen" and "one_time" set does not
328 work if there are any delivery delays because "one_time" forces the
329 parent to be marked "delivered", so its unseen clone is never tried
330 again. For this reason, Exim now forbids the simultaneous setting of
331 these two options.
333PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
334 redirected to themselves ("homonym" addresses). Read the long ChangeLog
335 entry if you want to know the details. The fix, however, neglected to
336 consider the case when local delivery batching is involved. The test for
337 "previously delivered" was not happening when checking to see if an
338 address could be batched with a previous (undelivered) one; under
339 certain circumstances this could lead to multiple deliveries to the same
c2c19e9d 340 address.
342PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
343 in its include files, and this causes problems building Exim.
345PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
346 header_syntax) but Exim was just ignoring anything given after a slash.
347 In particular, this caused confusion with an attempt to use "verify =
348 reverse_host_lookup/defer_ok". An error is now given when options are
349 supplied for verify items that do not have them. (Maybe reverse_host_
350 lookup should have a defer_ok option, but that's a different point.)
352PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
353 defined by RFC 821) to 2048, because there were problems with some AUTH
354 commands, and RFC 1869 says the size should be increased for extended
355 SMTP commands that take arguments.
357PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
358 Finch).
360PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
361 "unknown" error; now it says that the functionality isn't in the binary.
8d67ada3 362
363PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
364 an address' error message when a string expansion fails (syntax or
365 whatever). Otherwise the password may appear in the log. Following change
366 PH/42 below, there is no longer a chance of it appearing in a bounce
367 message.
49c2d5ea 368
369PH/11 Installed exipick version 20050225.0 from John Jetmore.
371PH/12 If the last host in a fallback_hosts list was multihomed, only the first
372 of its addresses was ever tried. (Bugzilla bug #2.)
374PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
375 the result incorrectly in the debug output. (It correctly added a newline
376 to what was transported.)
378TF/01 Added $received_time.
380PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
381 commented out examples of how to interface to a virus scanner and to
382 SpamAssassin. Also added commented examples of av_scanner and
383 spamd_address settings.
385PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
386 and controls are allowed in which ACLs. There were a couple of minor
387 errors. Some of the entries in the conditions table (which is a table of
388 where they are NOT allowed) were getting very unwieldy; rewrote them as a
389 negation of where the condition IS allowed.
391PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
393PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
394 header file does not have a version number, so I've had to invent a new
395 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
396 API. The code is untested by me (my Linux distribution still has 0.3.2 of
397 radiusclient), but it was contributed by a Radius user.
399PH/18 Installed Lars Mainka's patch for the support of CRL collections in
400 files or directories, for OpenSSL.
402PH/19 When an Exim process that is running as root has to create an Exim log
403 file, it does so in a subprocess that runs as exim:exim so as to get the
404 ownership right at creation (otherwise, other Exim processes might see
405 the file with the wrong ownership). There was no test for failure of this
406 fork() call, which would lead to the process getting stuck as it waited
407 for a non-existent subprocess. Forks do occasionally fail when resources
408 run out. I reviewed all the other calls to fork(); they all seem to check
409 for failure.
411PH/20 When checking for unexpected SMTP input at connect time (before writing
412 the banner), Exim was not dealing correctly with a non-positive return
413 from the read() function. If the client had disconnected by this time,
414 the result was a log entry for a synchronization error with an empty
415 string after "input=" when read() returned zero. If read() returned -1
416 (an event I could not check), uninitialized data bytes were printed.
417 There were reports of junk text (parts of files, etc) appearing after
418 "input=".
420PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
422PH/22 Added support for macro redefinition, and (re)definition in between
423 driver and ACL definitions.
425PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
426 forgetting to use the resulting value; it was using the unexpanded value.
428PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
429 hadn't been configured. The fix is from Juergen Kreileder, who
430 understands it better than I do:
432 "Here's what I see happening with three configured cyrus_sasl
433 authenticators configured (plain, login, cram-md5):
435 On startup auth_cyrus_sasl_init() gets called for each of these.
436 This means three calls to sasl_listmech() without a specified mech_list.
437 => SASL tests which mechs of all available mechs actually work
438 => three warnings about OTP not working
439 => the returned list contains: plain, login, cram-md5, digest-md5, ...
441 With the patch, sasl_listmech() also gets called three times. But now
442 SASL's mech_list option is set to the server_mech specified in the the
443 authenticator. Or in other words, the answer from sasl_listmech()
444 gets limited to just the mech you're testing for (which is different
445 for each call.)
446 => the return list contains just 'plain' or 'login', 'cram-md5' or
447 nothing depending on the value of ob->server_mech.
449 I've just tested the patch: Authentication still works fine,
450 unavailable mechs specified in the exim configuration are still
451 caught, and the auth.log warnings about OTP are gone."
453PH/25 When debugging is enabled, the contents of the command line are added
454 to the debugging output, even when log_selector=+arguments is not
455 specified.
457PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
458 answer is "GNU", and only if the return is "GNU/something" is the answer
459 "Linux".
461PH/27 $acl_verify_message is now set immediately after the failure of a
462 verification in an ACL, and so is available in subsequent modifiers. In
463 particular, the message can be preserved by coding like this:
465 warn !verify = sender
466 set acl_m0 = $acl_verify_message
468 Previously, $acl_verify_message was set only while expanding "message"
469 and "log_message" when a very denied access.
471PH/28 Modified OS/os.c-Linux with
473 -#ifndef OS_LOAD_AVERAGE
474 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
476 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
477 nomenclature these days.)
479PH/29 Installed patch from the Sieve maintainer that adds the options
480 sieve_useraddress and sieve_subaddress to the redirect router.
482PH/30 In these circumstances:
483 . Two addresses routed to the same list of hosts;
484 . First host does not offer TLS;
485 . First host accepts first address;
486 . First host gives temporary error to second address;
487 . Second host offers TLS and a TLS session is established;
488 . Second host accepts second address.
489 Exim incorrectly logged both deliveries with the TLS parameters (cipher
490 and peerdn, if requested) that were in fact used only for the second
491 address.
7e8bec7a 492
493PH/31 When doing a callout as part of verifying an address, Exim was not paying
494 attention to any local part prefix or suffix that was matched by the
495 router that accepted the address. It now behaves in the same way as it
496 does for delivery: the affixes are removed from the local part unless
497 rcpt_include_affixes is set on the transport.
499PH/32 Add the sender address, as F=<...>, to the log line when logging a
500 timeout during the DATA phase of an incoming message.
502PH/33 Sieve envelope tests were broken for match types other than :is. I have
503 applied a patch sanctioned by the Sieve maintainer.
c688b954 504
505PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
506 the uid or gid is negative. A case of a negative gid caused this to be
507 noticed. The fix allows for either to be negative.
509PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
510 clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
511 overlooked.
513PH/36 The change PH/12 above was broken. Fixed it.
515PH/37 Exim used to check for duplicate addresses in the middle of routing, on
516 the grounds that routing the same address twice would always produce the
517 same answer. This might have been true once, but it is certainly no
518 longer true now. Routing a child address may depend on the previous
519 routing that produced that child. Some complicated redirection strategies
520 went wrong when messages had multiple recipients, and made Exim's
521 behaviour dependent on the order in which the addresses were given.
523 I have moved the duplicate checking until after the routing is complete.
524 Exim scans the addresses that are assigned to local and remote
525 transports, and removes any duplicates. This means that more work will be
526 done, as duplicates will always all be routed, but duplicates are
527 presumably rare, so I don't expect this is of any significance.
529 For deliveries to pipes, files, and autoreplies, the duplicate checking
530 still happens during the routing process, since they are not going to be
531 routed further.
533PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
534 It corrects a timeout issue with spamd. This is Ian's comment: "The
535 background is that sometimes spamd either never reads data from a
536 connection it has accepted, or it never writes response data. The exiscan
537 spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
538 blindly assumes that writes won't block so it may never time out."
540PH/39 Allow G after quota size as well as K and M.
542PH/40 The value set for $authenticated_id in an authenticator may not contain
543 binary zeroes or newlines because the value is written to log lines and
544 to spool files. There was no check on this. Now the value is run through
545 the string_printing() function so that such characters are converted to
546 printable escape sequences.
548PH/41 $message_linecount is a new variable that contains the total number of
549 lines in the message. Compare $body_linecount, which is the count for the
550 body only.
552PH/42 Exim no longer gives details of delivery errors for specific addresses in
553 bounce and delay warning messages, except in certain special cases, which
554 are as follows:
556 (a) An SMTP error message from a remote host;
557 (b) A message specified in a :fail: redirection;
558 (c) A message specified in a "fail" command in a system filter;
559 (d) A message specified in a FAIL return from the queryprogram router;
560 (e) A message specified by the cannot_route_message router option.
562 In these cases only, Exim does include the error details in bounce and
563 warning messages. There are also a few cases where bland messages such
564 as "unrouteable address" or "local delivery error" are given.
566PH/43 $value is now also set for the "else" part of a ${run expansion.
568PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
569 being worked on, but at least Exim now implements the latest version to
570 play with."
572PH/45 In a pipe transport, although a timeout while waiting for the pipe
573 process to complete was treated as a delivery failure, a timeout while
574 writing the message to the pipe was logged, but erroneously treated as a
575 successful delivery. Such timeouts include transport filter timeouts. For
576 consistency with the overall process timeout, these timeouts are now
577 treated as errors, giving rise to delivery failures by default. However,
578 there is now a new Boolean option for the pipe transport called
579 timeout_defer, which, if set TRUE, converts the failures into defers for
580 both kinds of timeout. A transport filter timeout is now identified in
581 the log output.
583PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
584 systems where "make" and "gmake" are different, calling "gmake" at top
585 level broke things. I've arranged for the value of $(MAKE) to be passed
586 from the Makefile to this script so that it can call the same version of
587 "make".
7982096b 589
590A note about Exim versions 4.44 and 4.50
593Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
594changes of various kinds. As a consequence, a big documentation update was
595needed. This delayed the release for rather longer than seemed good, especially
596in the light of a couple of (minor) security issues. Therefore, the changes
597that fixed bugs were backported into 4.43, to create a 4.44 maintenance
598release. So 4.44 and 4.50 are in effect two different branches that both start
599from 4.43.
601I have left the 4.50 change log unchanged; it contains all the changes since
6024.43. The change log for 4.44 is below; many of its items are identical to
603those for 4.50. This seems to be the most sensible way to preserve the
604historical information.
f7b63901 607Exim version 4.50
610 1. Minor wording change to the doc/README.SIEVE file.
139059f6 612 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
5fe762f6 613 computation of the current number of files was incorrect.
495ae4b0 614
615 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
616 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
617 place.
619 4. Give more explanation in the error message when the command for a transport
620 filter fails to execute.
622 5. There are several places where Exim runs a non-Exim command in a
623 subprocess. The SIGUSR1 signal should be disabled for these processes. This
624 was being done only for the command run by the queryprogram router. It is
625 now done for all such subprocesses. The other cases are: ${run, transport
626 filters, and the commands run by the lmtp and pipe transports.
628 6. Added CONFIGURE_GROUP build-time option.
630 7. Some older OS have a limit of 256 on the maximum number of file
631 descriptors. Exim was using setrlimit() to set 1000 as a large value
632 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
633 systems. I've change it so that if it can't get 1000, it tries for 256.
35edf2ff 634
635 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
636 was an oversight, and furthermore, ever since the addition of extra
637 controls (e.g. 4.43/32), the checks on when to allow different forms of
638 "control" were broken. There should now be diagnostics for all cases when a
639 control that does not make sense is encountered.
641 9. Added the /retain_sender option to "control=submission".
64310. $recipients is now available in the predata ACL (oversight).
64511. Tidy the search cache before the fork to do a delivery from a message
646 received from the command line. Otherwise the child will trigger a lookup
647 failure and thereby defer the delivery if it tries to use (for example) a
648 cached ldap connection that the parent has called unbind on.
65012. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
651 of $address_data from the recipient verification was clobbered by the
652 sender verification.
65413. The value of address_data from a sender verification is now available in
655 $sender_address_data in subsequent conditions in the ACL statement.
65714. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
65915. Added a new option "connect=<time>" to callout options, to set a different
660 connection timeout.
66216. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
663 was its contents. (It was OK if the option was not defined at all.)
66517. A "Completed" log line is now written for messages that are removed from
666 the spool by the -Mrm option.
66818. New variables $sender_verify_failure and $recipient_verify_failure contain
669 information about exactly what failed.
67119. Added -dd to debug only the daemon process.
67320. Incorporated Michael Haardt's patch to ldap.c for improving the way it
674 handles timeouts, both on the server side and network timeouts. Renamed the
675 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
67721. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
678 It is now set to "smtps".
68022. $host_address is now set to the target address during the checking of
681 ignore_target_hosts.
68323. When checking ignore_target_hosts for an ipliteral router, no host name was
684 being passed; this would have caused $sender_host_name to have been used if
685 matching the list had actually called for a host name (not very likely,
686 since this list is usually IP addresses). A host name is now passed as
687 "[x.x.x.x]".
68924. Changed the calls that set up the SIGCHLD handler in the daemon to use the
690 code that specifies a non-restarting handler (typically sigaction() in
691 modern systems) in an attempt to fix a rare and obscure crash bug.
69325. Narrowed the window for a race in the daemon that could cause it to ignore
694 SIGCHLD signals. This is not a major problem, because they are used only to
695 wake it up if nothing else does.
69726. A malformed maildirsize file could cause Exim to calculate negative values
698 for the mailbox size or file count. Odd effects could occur as a result.
699 The maildirsize information is now recalculated if the size or filecount
700 end up negative.
70227. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
703 support for a long time. Removed HAVE_SYS_VFS_H.
70528. Installed the latest version of exipick from John Jetmore.
70729. In an address list, if the pattern was not a regular expression, an empty
708 subject address (from a bounce message) matched only if the pattern was an
709 empty string. Non-empty patterns were not even tested. This was the wrong
710 because it is perfectly reasonable to use an empty address as part of a
711 database query. An empty address is now tested by patterns that are
712 lookups. However, all the other forms of pattern expect the subject to
713 contain a local part and a domain, and therefore, for them, an empty
714 address still always fails if the pattern is not itself empty.
71630. Exim went into a mad DNS loop when attempting to do a callout where the
717 host was specified on an smtp transport, and looking it up yielded more
718 than one IP address.
72031. Re-factored the code for checking spool and log partition space into a
721 function that finds that data and another that does the check. The former
722 is then used to implement four new variables: $spool_space, $log_space,
723 $spool_inodes, and $log_inodes.
72532. The RFC2047 encoding function was originally intended for short strings
726 such as real names; it was not keeping to the 75-character limit for
727 encoded words that the RFC imposes. It now respects the limit, and
728 generates multiple encoded words if necessary. To be on the safe side, I
729 have increased the buffer size for the ${rfc2047: expansion operator from
730 1024 to 2048 bytes.
73233. It is now permitted to omit both strings after an "if" condition; if the
733 condition is true, the result is "true". As before, when the second string
734 is omitted, a false condition yields an empty string. This makes it less
735 cumbersome to write custom ACL and router conditions.
73734. Failure to deliver a bounce message always caused it to be frozen, even if
738 there was an errors_to setting on the router. The errors_to setting is now
739 respected.
74135. If an IPv6 address is given for -bh or -bhc, it is now converted to the
742 canonical form (fully expanded) before being placed in
743 $sender_host_address.
74536. The table in the code that translates DNS record types into text (T_A to
746 "A" for instance) was missing entries for NS and CNAME. It is just possible
747 that this could have caused confusion if both these types were looked up
748 for the same domain, because the text type is used as part of Exim's
749 per-process caching. But the chance of anyone hitting this buglet seems
750 very small.
75237. The dnsdb lookup has been extended in a number of ways.
754 (1) There is a new type, "zns", which walks up the domain tree until it
755 finds some nameserver records. It should be used with care.
757 (2) There is a new type, "mxh", which is like "mx" except that it returns
758 just the host names, not the priorities.
760 (3) It is now possible to give a list of domains (or IP addresses) to be
761 looked up. The behaviour when one of the lookups defers can be
762 controlled by a keyword.
7bb56e1f 763
ea3bc19b 764 (4) It is now possible to specify the separator character for use when
7bb56e1f 765 multiple records are returned.
33397d19 766
76738. The dnslists ACL condition has been extended: it is now possible to supply
768 a list of IP addresses and/or domains to be looked up in a particular DNS
769 domain.
77139. Added log_selector=+queue_time_overall.
77340. When running the queue in the test harness, wait just a tad after forking a
774 delivery process, to get repeatability of debugging output.
77641. Include certificate and key file names in error message when GnuTLS fails
777 to set them up, because the GnuTLS error message doesn't include the name
778 of the failing file when there is a problem reading it.
78042. Allow both -bf and -bF in the same test run.
78243. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
78444. The "Exiscan patch" is now merged into the mainline Exim source.
78645. Sometimes the final signoff response after QUIT could fail to get
787 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
788 < 0 before doing a fflush(). This bug looks as though it goes back to the
789 introduction of TLS in release 3.20, but "sometimes" must have been rare
790 because the tests only now provoked it.
79246. Reset the locale to "C" after calling embedded Perl, in case it was changed
793 (this can affect the format of dates).
79547. exim_tidydb, when checking for the continued existence of a message for
796 which it has found a message-specific retry record, was not finding
797 messages that were in split spool directories. Consequently, it was
798 deleting retry records that should have stayed in existence.
80048. Steve fixed some bugs in eximstats.
80249. The SPA authentication driver was not abandoning authentication and moving
803 on to the next authenticator when an expansion was forced to fail,
804 contradicting the general specification for all authenticators. Instead it
805 was generating a temporary error. It now behaves as specified.
80750. The default ordering of permitted cipher suites for GnuTLS was pessimal
808 (the order specifies the preference for clients). The order is now AES256,
809 AES128, 3DES, ARCFOUR128.
81151. Small patch to Sieve code - explicitly set From: when generating an
812 autoreply.
81452. Exim crashed if a remote delivery caused a very long error message to be
815 recorded - for instance if somebody sent an entire SpamAssassin report back
816 as a large number of 550 error lines. This bug was coincidentally fixed by
817 increasing the size of one of Exim's internal buffers (big_buffer) that
818 happened as part of the Exiscan merge. However, to be on the safe side, I
819 have made the code more robust (and fixed the comments that describe what
820 is going on).
82253. Now that there can be additional text after "Completed" in log lines (if
823 the queue_time_overall log selector is set), a one-byte patch to exigrep
824 was needed to allow it to recognize "Completed" as not the last thing in
825 the line.
82754. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
828 patch that reportedly fixes this has been added. I am not expert enough to
829 create a test for it. This is what the patch creator wrote:
831 "I found a little strange behaviour of ldap code when working with
832 Windows 2003 AD Domain, where users was placed in more than one
833 Organization Units. When I tried to give exim partial DN, the exit code
834 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
835 But simultaneously result of request was absolutely normal ldap result,
836 so I produce this patch..."
838 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
839 REFERENCE, so I have modified the code to exclude the patch when that macro
840 is not defined.
84255. Some experimental protocols are using DNS PTR records for new purposes. The
843 keys for these records are domain names, not reversed IP addresses. The
844 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
845 leaves it alone. Component reversal etc. now happens only for IP addresses.
ea3a6f44 846 CAN-2005-0021
7102e136 847
84856. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
85057. Double the size of the debug message buffer (to 2048) so that more of very
851 long debug lines gets shown.
85358. The exicyclog utility now does better if the number of log files to keep
854 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
85659. Two changes related to the smtp_active_hostname option:
858 (1) $smtp_active_hostname is now available as a variable.
859 (2) The default for smtp_banner uses $smtp_active_hostname instead
860 of $primary_hostname.
86260. The host_aton() function is supposed to be passed a string that is known
863 to be a valid IP address. However, in the case of IPv6 addresses, it was
864 not checking this. This is a hostage to fortune. Exim now panics and dies
865 if the condition is not met. A case was found where this could be provoked
866 from a dnsdb PTR lookup with an IPv6 address that had more than 8
867 components; fortuitously, this particular loophole had already been fixed
868 by change 4.50/55 above.
870 If there are any other similar loopholes, the new check in host_aton()
871 itself should stop them being exploited. The report I received stated that
872 data on the command line could provoke the exploit when Exim was running as
873 exim, but did not say which command line option was involved. All I could
874 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
875 running as the user.
ea3a6f44 876 CAN-2005-0021
87861. There was a buffer overflow vulnerability in the SPA authentication code
879 (which came originally from the Samba project). I have added a test to the
880 spa_base64_to_bits() function which I hope fixes it.
ea3a6f44 881 CAN-2005-0022
b975ba52 882
88362. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
884 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
88663. The daemon start-up calls getloadavg() while still root for those OS that
887 need the first call to be done as root, but it missed one case: when
888 deliver_queue_load_max is set with deliver_drop_privilege. This is
889 necessary for the benefit of the queue runner, because there is no re-exec
890 when deliver_drop_privilege is set.
89264. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
893 This has been fixed.
89565. Caching of lookup data for "hosts =" ACL conditions, when a named host list
896 was in use, was not putting the data itself into the right store pool;
897 consequently, it could be overwritten for a subsequent message in the same
898 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
899 the caching.)
90166. Added hosts_max_try_hardlimit to the smtp transport, default 50.
90367. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
904 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
905 the function were treating the return as a boolean value, which happened to
906 work because 0=false and not-0=true, but is not correct code.
90868. The host_aton() function was not handling scoped IPv6 addresses (those
909 with, for example, "%eth0" on the end) correctly.
91169. Fixed some compiler warnings in acl.c for the bitmaps specified with
912 negated items (that is, ~something) in unsigned ints. Some compilers
913 apparently mutter when there is no cast.
91570. If an address verification called from an ACL failed, and did not produce a
916 user-specific message (i.e. there was only a "system" message), nothing was
917 put in $acl_verify_message. In this situation, it now puts the system
918 message there.
92071. Change 4.23/11 added synchronization checking at the start of an SMTP
921 session; change 4.31/43 added the unwanted input to the log line - except
922 that it did not do this in the start of session case. It now does.
92472. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
925 This is wrong and can cause the other end to generate a synchronization
926 error if it is another Exim or anything else that does the synchronization
927 check. A QUIT command is no longer sent after a timeout.
92973. $host_lookup_deferred has been added, to make it easier to detect DEFERs
930 during host lookups.
93274. The defer_ok option of callout verification was not working if it was used
933 when verifying addresses in header lines, that is, for this case:
935 verify = header_sender/callout=defer_ok
93775. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
938 those file descriptors could be used for SMTP connections. If anything
939 wrote to stderr (the example that came up was "warn" in embedded Perl), it
940 could be sent to the SMTP client, causing chaos. The daemon now opens
941 stdin, stdout, and stderr to /dev/null when it puts itself into the
942 background.
94476. Arrange for output from Perl's "warn" command to be written to Exim's main
945 log by default. The user can override this with suitable Perl magic.
94777. The use of log_message on a "discard" ACL verb, which is supposed to add to
948 the log message when discard triggers, was not working for the DATA ACL or
949 for the non-SMTP ACL.
95178. Error message wording change in sieve.c.
95379. If smtp_accept_max_per_host was set, the number of connections could be
954 restricted to fewer than expected, because the daemon was trying to set up
955 a new connection before checking whether the processes handling previous
956 connections had finished. The check for completed processes is now done
957 earlier. On busy systems, this bug wouldn't be noticed because something
958 else would have woken the daemon, and it would have reaped the completed
959 process earlier.
96180. If a message was submitted locally by a user whose login name contained one
962 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
963 It caused a spool format error. I have fixed the spool reading code. A
964 related problem was that the "from" clause in the Received: line became
965 illegal because of the space(s). It is now covered by ${quote_local_part.
96781. Included the latest eximstats from Steve (adds average sizes to HTML Top
968 tables).
97082. Updated OS/Makefile-AIX as per message from Mike Meredith.
97283. Patch from Sieve maintainer to fix unterminated string problem in
973 "vacation" handling.
97584. Some minor changes to the Linux configuration files to help with other
976 OS variants using glibc.
97885. One more patch for Sieve to update vacation handling to latest spec.
495ae4b0 980
982See the note above about the 4.44 and 4.50 releases.
986Exim version 4.44
989 1. Change 4.43/35 introduced a bug that caused file counts to be
990 incorrectly computed when quota_filecount was set in an appendfile
991 transport
993 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
994 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
995 place.
997 3. Give more explanation in the error message when the command for a transport
998 filter fails to execute.
1000 4. There are several places where Exim runs a non-Exim command in a
1001 subprocess. The SIGUSR1 signal should be disabled for these processes. This
1002 was being done only for the command run by the queryprogram router. It is
1003 now done for all such subprocesses. The other cases are: ${run, transport
1004 filters, and the commands run by the lmtp and pipe transports.
1006 5. Some older OS have a limit of 256 on the maximum number of file
1007 descriptors. Exim was using setrlimit() to set 1000 as a large value
1008 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
1009 systems. I've change it so that if it can't get 1000, it tries for 256.
1011 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
1012 was an oversight, and furthermore, ever since the addition of extra
1013 controls (e.g. 4.43/32), the checks on when to allow different forms of
1014 "control" were broken. There should now be diagnostics for all cases when a
1015 control that does not make sense is encountered.
1017 7. $recipients is now available in the predata ACL (oversight).
1019 8. Tidy the search cache before the fork to do a delivery from a message
1020 received from the command line. Otherwise the child will trigger a lookup
1021 failure and thereby defer the delivery if it tries to use (for example) a
1022 cached ldap connection that the parent has called unbind on.
1024 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
1025 of $address_data from the recipient verification was clobbered by the
1026 sender verification.
102810. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
1029 was its contents. (It was OK if the option was not defined at all.)
103111. A "Completed" log line is now written for messages that are removed from
1032 the spool by the -Mrm option.
103412. $host_address is now set to the target address during the checking of
1035 ignore_target_hosts.
103713. When checking ignore_target_hosts for an ipliteral router, no host name was
1038 being passed; this would have caused $sender_host_name to have been used if
1039 matching the list had actually called for a host name (not very likely,
1040 since this list is usually IP addresses). A host name is now passed as
1041 "[x.x.x.x]".
104314. Changed the calls that set up the SIGCHLD handler in the daemon to use the
1044 code that specifies a non-restarting handler (typically sigaction() in
1045 modern systems) in an attempt to fix a rare and obscure crash bug.
104715. Narrowed the window for a race in the daemon that could cause it to ignore
1048 SIGCHLD signals. This is not a major problem, because they are used only to
1049 wake it up if nothing else does.
105116. A malformed maildirsize file could cause Exim to calculate negative values
1052 for the mailbox size or file count. Odd effects could occur as a result.
1053 The maildirsize information is now recalculated if the size or filecount
1054 end up negative.
105617. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
1057 support for a long time. Removed HAVE_SYS_VFS_H.
ea3a6f44 105918. Updated exipick to current release from John Jetmore.
106119. Allow an empty sender to be matched against a lookup in an address list.
1062 Previously the only cases considered were a regular expression, or an
1063 empty pattern.
106520. Exim went into a mad DNS lookup loop when doing a callout where the
1066 host was specified on the transport, if the DNS lookup yielded more than
1067 one IP address.
106921. The RFC2047 encoding function was originally intended for short strings
1070 such as real names; it was not keeping to the 75-character limit for
1071 encoded words that the RFC imposes. It now respects the limit, and
1072 generates multiple encoded words if necessary. To be on the safe side, I
1073 have increased the buffer size for the ${rfc2047: expansion operator from
1074 1024 to 2048 bytes.
bbe902f0 1075
107622. Failure to deliver a bounce message always caused it to be frozen, even if
1077 there was an errors_to setting on the router. The errors_to setting is now
1078 respected.
108023. If an IPv6 address is given for -bh or -bhc, it is now converted to the
1081 canonical form (fully expanded) before being placed in
1082 $sender_host_address.
108424. Updated eximstats to version 1.33
108625. Include certificate and key file names in error message when GnuTLS fails
1087 to set them up, because the GnuTLS error message doesn't include the name
1088 of the failing file when there is a problem reading it.
109026. Expand error message when OpenSSL has problems setting up cert/key files.
ea3a6f44 1091 As per change 25.
bbe902f0 1092
109327. Reset the locale to "C" after calling embedded Perl, in case it was changed
1094 (this can affect the format of dates).
bbe902f0 1095
109628. exim_tidydb, when checking for the continued existence of a message for
1097 which it has found a message-specific retry record, was not finding
1098 messages that were in split spool directories. Consequently, it was
1099 deleting retry records that should have stayed in existence.
110129. eximstats updated to version 1.35
1102 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
1103 1.35 - bugfix such that pie charts by volume are generated correctly
110530. The SPA authentication driver was not abandoning authentication and moving
1106 on to the next authenticator when an expansion was forced to fail,
1107 contradicting the general specification for all authenticators. Instead it
1108 was generating a temporary error. It now behaves as specified.
bbe902f0 1109
111031. The default ordering of permitted cipher suites for GnuTLS was pessimal
1111 (the order specifies the preference for clients). The order is now AES256,
1112 AES128, 3DES, ARCFOUR128.
bbe902f0 1113
111431. Small patch to Sieve code - explicitly set From: when generating an
1115 autoreply.
bbe902f0 1116
111732. Exim crashed if a remote delivery caused a very long error message to be
1118 recorded - for instance if somebody sent an entire SpamAssassin report back
1119 as a large number of 550 error lines. This bug was coincidentally fixed by
1120 increasing the size of one of Exim's internal buffers (big_buffer) that
1121 happened as part of the Exiscan merge. However, to be on the safe side, I
1122 have made the code more robust (and fixed the comments that describe what
1123 is going on).
bbe902f0 1124
112533. Some experimental protocols are using DNS PTR records for new purposes. The
1126 keys for these records are domain names, not reversed IP addresses. The
1127 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
1128 leaves it alone. Component reversal etc. now happens only for IP addresses.
1129 CAN-2005-0021
113134. The host_aton() function is supposed to be passed a string that is known
1132 to be a valid IP address. However, in the case of IPv6 addresses, it was
1133 not checking this. This is a hostage to fortune. Exim now panics and dies
1134 if the condition is not met. A case was found where this could be provoked
1135 from a dnsdb PTR lookup with an IPv6 address that had more than 8
1136 components; fortuitously, this particular loophole had already been fixed
1137 by change 4.50/55 or 4.44/33 above.
1139 If there are any other similar loopholes, the new check in host_aton()
1140 itself should stop them being exploited. The report I received stated that
1141 data on the command line could provoke the exploit when Exim was running as
1142 exim, but did not say which command line option was involved. All I could
1143 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
1144 running as the user.
1145 CAN-2005-0021
114735. There was a buffer overflow vulnerability in the SPA authentication code
1148 (which came originally from the Samba project). I have added a test to the
1149 spa_base64_to_bits() function which I hope fixes it.
1150 CAN-2005-0022
115236. The daemon start-up calls getloadavg() while still root for those OS that
1153 need the first call to be done as root, but it missed one case: when
1154 deliver_queue_load_max is set with deliver_drop_privilege. This is
1155 necessary for the benefit of the queue runner, because there is no re-exec
1156 when deliver_drop_privilege is set.
bbe902f0 1157
115837. Caching of lookup data for "hosts =" ACL conditions, when a named host list
1159 was in use, was not putting the data itself into the right store pool;
1160 consequently, it could be overwritten for a subsequent message in the same
1161 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
1162 the caching.)
bbe902f0 1163
116438. Sometimes the final signoff response after QUIT could fail to get
1165 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
1166 < 0 before doing a fflush(). This bug looks as though it goes back to the
1167 introduction of TLS in release 3.20, but "sometimes" must have been rare
1168 because the tests only now provoked it.
1171Exim version 4.43
1174 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
1175 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
1176 Now it returns an integer. A number of calls were still expecting a T/F
1177 return. Fortuitously, in all cases, the tests worked in OK situations,
1178 which is the norm. However, things would have gone wrong on any write
1179 failures on the smtp file descriptor. This function is used when sending
1180 messages over SMTP and also when doing verify callouts.
1182 2. When Exim is called to do synchronous delivery of a locally submitted
1183 message (the -odf or -odi options), it no longer closes stderr before doing
1184 the delivery.
1186 3. Implemented the mua_wrapper option.
1188 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
1190 5. Implemented the functions header_remove(), header_testname(),
1191 header_add_at_position(), and receive_remove_recipient(), and exported them
1192 to local_scan().
1194 6. If an ACL "warn" statement specified the addition of headers, Exim already
1195 inserted X-ACL-Warn: at the start if there was no header name. However, it
1196 was not making this test for the second and subsequent header lines if
1197 there were newlines in the string. This meant that an invalid header could
1198 be inserted if Exim was badly configured.
1200 7. Allow an ACL "warn" statement to add header lines at the start or after all
1201 the Received: headers, as well as at the end.
1203 8. Added the rcpt_4xx retry error code.
1205 9. Added postmaster_mailfrom=xxx to callout verification option.
120710. Added mailfrom=xxxx to the callout verification option, for verify=
1208 header_sender only.
121011. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
1211 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
121312. Inserted some casts to stop certain compilers warning when using pointer
1214 differences as field lengths or precisions in printf-type calls (mostly
1215 affecting debugging statements).
121713. Added optional readline() support for -be (dynamically loaded).
121914. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
1220 same clock tick as a message's arrival, so that its received time was the
1221 same as the "first fail" time on the retry record, and that message
1222 remained on the queue past the ultimate address timeout, every queue runner
1223 would try a delivery (because it was past the ultimate address timeout) but
1224 after another failure, the ultimate address timeout, which should have then
1225 bounced the address, did not kick in. This was a "< instead of <=" error;
1226 in most cases the first failure would have been in the next clock tick
1227 after the received time, and all would be well.
122915. The special items beginning with @ in domain lists (e.g. @mx_any) were not
1230 being recognized when the domain list was tested by the match_domain
1231 condition in an expansion string.
123316. Added the ${str2b64: operator.
123517. Exim was always calling setrlimit() to set a large limit for the number of
1236 processes, without checking whether the existing limit was already
1237 adequate. (It did check for the limit on file descriptors.) Furthermore,
1238 errors from getrlimit() and setrlimit() were being ignored. Now they are
1239 logged to the main and panic logs, but Exim does carry on, to try to do its
1240 job under whatever limits there are.
124218. Imported PCRE 5.0.
124419. Trivial typo in log message " temporarily refused connection" (the leading
1245 space).
124720. If the log selector return_path_on_delivery was set and an address was
1248 redirected to /dev/null, the delivery process crashed because it assumed
1249 that a return path would always be set for a "successful" delivery. In this
1250 case, the whole delivery is bypassed as an optimization, and therefore no
1251 return path is set.
125321. Internal re-arrangement: the function for sending a challenge and reading
1254 a response while authentication was assuming a zero-terminated challenge
1255 string. It's now changed to take a pointer and a length, to allow for
1256 binary data in such strings.
125822. Added the cyrus_sasl authenticator (code supplied by MBM).
126023. Exim was not respecting finduser_retries when seeking the login of the
1261 uid under which it was called; it was always trying 10 times. (The default
1262 setting of finduser_retries is zero.) Also, it was sleeping after the final
1263 failure, which is pointless.
126524. Implemented tls_on_connect_ports.
126725. Implemented acl_smtp_predata.
126926. If the domain in control=submission is set empty, Exim assumes that the
1270 authenticated id is a complete email address when it generates From: or
1271 Sender: header lines.
127327. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
1274 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
1275 chown and chgrp in /bin and hostname in /usr/bin.
127728. Exim was keeping the "process log" file open after each use, just as it
1278 does for the main log. This opens the possibility of it remaining open for
1279 long periods when the USR1 signal hits a daemon. Occasional processlog
1280 errors were reported, that could have been caused by this. Anyway, it seems
1281 much more sensible not to leave this file open at all, so that is what now
1282 happens.
128429. The long-running daemon process does not normally write to the log once it
1285 has entered its main loop, and it closes the log before doing so. This is
1286 so that log files can straightforwardly be renamed and moved. However,
1287 there are a couple of unusual error situations where the daemon does write
1288 log entries, and I had neglected to close the log afterwards.
129030. The text of an SMTP error response that was received during a remote
1291 delivery was being truncated at 512 bytes. This is too short for some of
1292 the long messages that one sometimes sees. I've increased the limit to
1293 1024.
129531. It is now possible to make retry rules that apply only when a message has a
1296 specific sender, in particular, an empty sender.
129832. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
1299 it possible to be selective about when SMTP synchronization is enforced.
130133. Added "control = caseful_local_part" and "control = "caselower_local_part".
130332. Implemented hosts_connection_nolog.
130533. Added an ACL for QUIT.
130734. Setting "delay_warning=" to disable warnings was not working; it gave a
1308 syntax error.
131035. Added mailbox_size and mailbox_filecount to appendfile.
131236. Added control = no_multiline_responses to ACLs.
131437. There was a bug in the logic of the code that waits for the clock to tick
1315 in the case where the clock went backwards by a substantial amount such
1316 that the microsecond fraction of "now" was more than the microsecond
1317 fraction of "then" (but the whole seconds number was less).
131938. Added support for the libradius Radius client library this is found on
1320 FreeBSD (previously only the radiusclient library was supported).
1323Exim version 4.42
1326 1. When certain lookups returned multiple values in the form name=value, the
1327 quoting of the values was not always being done properly. Specifically:
1328 (a) If the value started with a double quote, but contained no whitespace,
1329 it was not quoted.
1330 (b) If the value contained whitespace other than a space character (i.e.
1331 tabs or newlines or carriage returns) it was not quoted.
1332 This fix has been applied to the mysql and pgsql lookups by writing a
1333 separate quoting function and calling it from the lookup code. The fix
1334 should probably also be applied to nisplus, ibase and oracle lookups, but
1335 since I cannot test any of those, I have not disturbed their existing code.
1337 2. A hit in the callout cache for a specific address caused a log line with no
1338 reason for rejecting RCPT. Now it says "Previous (cached) callout
1339 verification failure".
1341 3. There was an off-by-one bug in the queryprogram router. An over-long
1342 return line was truncated at 256 instead of 255 characters, thereby
1343 overflowing its buffer with the terminating zero. As well as fixing this, I
1344 have increased the buffer size to 1024 (and made a note to document this).
1346 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
1347 when Exim is waiting for an SMTP response from a remote server, Exim
1348 restarts its select() call on the socket, thereby resetting its timeout.
1349 This is not a problem when such interrupts are rare. Somebody set up a cron
1350 job to run exiwhat every 2 minutes, which is less than the normal select()
1351 timeout (5 or 10 minutes). This meant that the select() timeout never
1352 kicked in because it was always reset. I have fixed this by comparing the
1353 time when an interrupt arrives with the time at the start of the first call
1354 to select(). If more time than the timeout has elapsed, the interrupt is
1355 treated as a timeout.
1357 5. Some internal re-factoring in preparation for the addition of Sieve
1358 extensions (by MH). In particular, the "personal" test is moved to a
1359 separate function, and given an option for scanning Cc: and Bcc: (which is
1360 not set for Exim filters).
1362 6. When Exim created an email address using the login of the caller as the
1363 local part (e.g. when creating a From: or Sender: header line), it was not
1364 quoting the local part when it contained special characters such as @.
1366 7. Installed new OpenBSD configuration files.
1368 8. Reworded some messages for syntax errors in "and" and "or" conditions to
1369 try to make them clearer.
1371 9. Callout options, other than the timeout value, were being ignored when
1372 verifying sender addresses in header lines. For example, when using
1374 verify = header_sender/callout=no_cache
1376 the cache was (incorrectly) being used.
137810. Added a missing instance of ${EXE} to the exim_install script; this affects
1379 only the Cygwin environment.
138111. When return_path_on_delivery was set as a log selector, if different remote
1382 addresses in the same message used different return paths and parallel
1383 remote delivery occurred, the wrong values would sometimes be logged.
1384 (Whenever a remote delivery process finished, the return path value from
1385 the most recently started remote delivery process was logged.)
138712. RFC 3848 specifies standard names for the "with" phrase in Received: header
1388 lines when AUTH and/or TLS are in use. This is the "received protocol"
1389 field. Exim used to use "asmtp" for authenticated SMTP, without any
1390 indication (in the protocol name) for TLS use. Now it follows the RFC and
1391 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
1392 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
1393 names appear in log lines as well as in Received: header lines.
139513. Installed MH's patches for Sieve to add the "copy" and "vacation"
1396 extensions, and comparison tests, and to fix some bugs.
139814. Changes to the "personal" filter test:
1400 (1) The test was buggy in that it was just doing the equivalent of
1401 "contains" tests on header lines. For example, if a user's address was
1402 anne@some.where, the "personal" test would incorrectly be true for
1404 To: susanne@some.where
1406 This test is now done by extracting each address from the header in turn,
1407 and checking the entire address. Other tests that are part of "personal"
1408 are now done using regular expressions (for example, to check local parts
1409 of addresses in From: header lines).
1411 (2) The list of non-personal local parts in From: addresses has been
1412 extended to include "listserv", "majordomo", "*-request", and "owner-*",
1413 taken from the Sieve specification recommendations.
1415 (3) If the message contains any header line starting with "List-" it is
1416 treated as non-personal.
1418 (4) The test for "circular" in the Subject: header line has been removed
1419 because it now seems ill-conceived.
142115. Minor typos in src/EDITME comments corrected.
142316. Installed latest exipick from John Jetmore.
142517. If headers_add on a router specified a text string that was too long for
1426 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
1427 of string_sprintf() is now avoided.
142918. $message_body_size was not set (it was always zero) when running the DATA
1430 ACL and the local_scan() function.
143219. For the "mail" command in an Exim filter, no default was being set for
1433 the once_repeat time, causing a random time value to be used if "once" was
1434 specified. (If the value happened to be <= 0, no repeat happened.) The
1435 default is now 0s, meaning "never repeat". The "vacation" command was OK
1436 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
1437 (I found it when inspecting the code).
143920. There is now an overall timeout for performing a callout verification. It
1440 defaults to 4 times the callout timeout, which applies to individual SMTP
1441 commands during the callout. The overall timeout applies when there is more
1442 than one host that can be tried. The timeout is checked before trying the
1443 next host. This prevents very long delays if there are a large number of
1444 hosts and all are timing out (e.g. when the network connections are timing
1445 out). The value of the overall timeout can be changed by specifying an
1446 additional sub-option for "callout", called "maxwait". For example:
1448 verify = sender/callout=5s,maxwait=20s
145021. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
1451 to the end before writing, but this should make it even safer).
145322. Exim was forgetting that it had advertised PIPELINING for the second and
1454 subsequent messages on an SMTP connection. It was also not resetting its
1455 memory on STARTTLS and an internal HELO.
145723. When Exim logs an SMTP synchronization error within a session, it now
1458 records whether PIPELINING has been advertised or not.
146024. Added 3 instances of "(long int)" casts to time_t variables that were being
1461 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
1462 rather than long int.
146425. Installed the latest Cygwin configuration files from the Cygwin maintainer.
146626. Added the never_mail option to autoreply.
1469Exim version 4.41
1472 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
1473 crash if the getsockname() call failed; this can happen if a connection is
1474 closed very soon after it is established. The problem was simply in the
1475 order in which certain operations were done, causing Exim to try to write
1476 to the SMTP stream before it had set up the file descriptor. The bug has
1477 been fixed by making things happen in the correct order.
1480Exim version 4.40
1483 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
1484 before the connection was closed, thus losing the rejection response.
1486 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
1487 some early Solaris releases, but causes trouble in current releases where
1488 socklen_t is defined.
1490 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
1491 always exist.
1493 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
1494 configured.
1496 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
1497 that releasing the top of it at the end releases what was used for sub-
1498 expansions (unless the block got too big). However, discard this block if
1499 the first thing is a variable or header, so that we can use its block when
1500 it is dynamic (useful for very large $message_headers, for example).
1502 6. Lookups now cache *every* query, not just the most recent. A new, separate
1503 store pool is used for this. It can be recovered when all lookup caches are
1504 flushed. Lookups now release memory at the end of their result strings.
1505 This has involved some general refactoring of the lookup sources.
1507 7. Some code has been added to the store_xxx() functions to reduce the amount
1508 of flapping under certain conditions.
1510 8. log_incoming_interface used to affect only the <= reception log lines. Now
1511 it causes the local interface and port to be added to several more SMTP log
1512 lines, for example "SMTP connection from", and rejection lines.
1514 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
151610. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
151811. If $host_data was set by virtue of a hosts lookup in an ACL, its value
1519 could be overwritten at the end of the current message (or the start of a
1520 new message if it was set in a HELO ACL). The value is now preserved for
1521 the duration of the SMTP connection.
152312. If a transport had a headers_rewrite setting, and a matching header line
1524 contained an unqualified address, that address was qualified, even if it
1525 did not match any rewriting rules. The underlying bug was that the values
1526 of the flags that permit the existence of unqualified sender and recipient
1527 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
1528 non-local messages, and by -bnq for local messages) were not being
1529 preserved with the message after it was received.
153113. When Exim was logging an SMTP synchronization error, it could sometimes log
1532 "next input=" as part of the text comprising the host identity instead of
1533 the correct text. The code was using the same buffer for two different
1534 strings. However, depending on which order the printing function evaluated
1535 its arguments, the bug did not always show up. Under Linux, for example, my
1536 test suite worked just fine.
153814. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
1539 doesn't work with some older versions of Perl. It has been changed to "my",
1540 which in any case is probably the better facility to use.
154215. A really picky compiler found some instances of statements for creating
1543 error messages that either had too many or two few arguments for the format
1544 string.
154616. The size of the buffer for calls to the DNS resolver has been increased
1547 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
1548 for addresses that have a lot of PTR records. This alleviates a problem; it
1549 does not fully solve it.
155117. A dnsdb lookup for PTR records that receives more data than will fit in the
1552 buffer now truncates the list and logs the incident, which is the same
1553 action as happens when Exim is looking up a host name and its aliases.
1554 Previously in this situation something unpredictable would happen;
1555 sometimes it was "internal error: store_reset failed".
155718. If a server dropped the connection unexpectedly when an Exim client was
1558 using GnuTLS and trying to read a response, the client delivery process
1559 crashed while trying to generate an error log message.
156119. If a "warn" verb in an ACL added multiple headers to a message in a single
1562 string, for example:
1564 warn message = H1: something\nH2: something
1566 the text was added as a single header line from Exim's point of view
1567 though it ended up OK in the delivered message. However, searching for the
1568 second and subsequent header lines using $h_h2: did not work. This has been
1569 fixed. Similarly, if a system filter added multiple headers in this way,
1570 the routers could not see them.
157220. Expanded the error message when iplsearch is called with an invalid key to
1573 suggest using net-iplsearch in a host list.
157521. When running tests using -bh, any delays imposed by "delay" modifiers in
1576 ACLs are no longer actually imposed (and a message to that effect is
1577 output).
157922. If a "gecos" field in a passwd entry contained escaped characters, in
1580 particular, if it contained a \" sequence, Exim got it wrong when building
1581 a From: or a Sender: header from that name. A second bug also caused
1582 incorrect handling when an unquoted " was present following a character
1583 that needed quoting.
158523. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1586 was not being matched caselessly.
158824. Arranged for all hyphens in the exim.8 source to be escaped with
1589 backslashes.
159125. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1592 properly. Recipient callout cache records were still being keyed to include
1593 the sender, even when use_sender was set false. This led to far more
1594 callouts that were necessary. The sender is no longer included in the key
1595 when use_sender is false.
159726. Added "control = submission" modifier to ACLs.
159927. Added the ${base62d: operator to decode base 62 numbers.
160128. dnsdb lookups can now access SRV records.
160329. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1604 the configuration file.
160630. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1607 (-v) mode. This makes the output for a verbose queue run more intelligible.
160931. Added a use_postmaster feature to recipient callouts.
161132. Added the $body_zerocount variable, containing the number of binary zero
1612 bytes in the message body.
161433. The time of last modification of the "new" subdirectory is now used as the
1615 "mailbox time last read" when there is a quota error for a maildir
1616 delivery.
161834. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
162035. Added +ignore_unknown as a special item in host lists.
162236. Code for decoding IPv6 addresses in host lists is now included, even if
1623 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1624 address was recognized as an IP address, but was then not correctly decoded
1625 into binary, causing unexpected and incorrect effects when compared with
1626 another IP address.
1629Exim version 4.34
1632 1. Very minor rewording of debugging text in manualroute to say "list of
1633 hosts" instead of "hostlist".
1635 2. If verify=header_syntax was set, and a header line with an unqualified
1636 address (no domain) and a large number of spaces between the end of the
1637 name and the colon was received, the reception process suffered a buffer
1638 overflow, and (when I tested it) crashed. This was caused by some obsolete
1639 code that should have been removed. The fix is to remove it!
1641 3. When running in the test harness, delay a bit after writing a bounce
1642 message to get a bit more predictability in the log output.
1644 4. Added a call to search_tidyup() just before forking a reception process. In
1645 theory, someone could use a lookup in the expansion of smtp_accept_max_
1646 per_host which, without the tidyup, could leave open a database connection.
1648 5. Added the variables $recipient_data and $sender_data which get set from a
1649 lookup success in an ACL "recipients" or "senders" condition, or a router
1650 "senders" option, similar to $domain_data and $local_part_data.
1652 6. Moved the writing of debug_print from before to after the "senders" test
1653 for routers.
1655 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1656 problems for message scanning, either using a data ACL, or using
1657 local_scan() because the Received: header was not generated till after they
1658 were called (in order to set the time as the time of reception completion).
1659 I have revised the way this works. The header is now generated after the
1660 body is received, but before the ACL or local_scan() are called. After they
1661 are run, the timestamp in the header is updated.
1664Exim version 4.33
1667 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1668 before starting a queue runner without re-exec. This happened only when
1669 deliver_drop_privilege was set or when the Exim user was set to root. The
1670 effect of the bug was that timeouts during subsequent deliveries caused
1671 crashes instead of being properly handled. The handler is now left at its
1672 default (and expected) setting.
1674 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1675 message, again when deliver_drop_privilege is set or Exim is run as root.
1676 The bug described in (1) was not present in this case, but the tidying up
1677 of the other signals was missing. I have made the two cases consistent.
1679 3. The ignore_target_hosts setting on a manualroute router was being ignored
1680 for hosts that were looked up using the /MX notation.
1682 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1683 in domain lists.
1685 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1686 operated on the sender address. After changing the $sender_address to <>
1687 for the sender address verify, Exim was re-instated it as the original
1688 (before rewriting) address, but remembering that it had rewritten it, so it
1689 wasn't rewriting it again. This bug also had the effect of breaking the
1690 sender address verification caching when the sender address was rewritten.
1692 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1693 This has been changed so that if the ip literal address matches
1694 ignore_target_hosts, the router declines.
1696 7. Added expansion conditions match_domain, match_address, and match_local_
1697 part (NOT match_host).
1699 8. The placeholder for the Received: header didn't have a length field set.
1701 9. Added code to Exim itself and to exim_lock to test for a specific race
1702 condition that could lead to file corruption when using MBX delivery. The
1703 issue is with the lockfile that is created in /tmp. If this file is removed
1704 after a process has opened it but before that process has acquired a lock,
1705 there is the potential for a second process to recreate the file and also
1706 acquire a lock. This could lead to two Exim processes writing to the file
1707 at the same time. The added code performs the same test as UW imapd; it
1708 checks after acquiring the lock that its file descriptor still refers to
1709 the same named file.
171110. The buffer for building added header lines was of fixed size, 8192 bytes.
1712 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1713 when Exim is built.
171511. Added the smtp_active_hostname option. If used, this will typically be made
1716 to depend on the incoming interface address. Because $interface_address is
1717 not set up until the daemon has forked a reception process, error responses
1718 that can happen earlier (such as "too many connections") no longer contain
1719 a host name.
172112. If an expansion in a condition on a "warn" statement fails because a lookup
1722 defers, the "warn" statement is abandoned, and the next ACL statement is
1723 processed. Previously this caused the whole ACL to be aborted.
172513. Added the iplsearch lookup type.
172714. Added ident_timeout as a log selector.
172915. Added tls_certificate_verified as a log selector.
173116. Added a global option tls_require_ciphers (compare the smtp transport
1732 option of the same name). This controls incoming TLS connections.
173417. I finally figured out how to make tls_require_ciphers do a similar thing
1735 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1736 before starting the TLS session.
173818. Tabs are now shown as \t in -bP output.
174019. If the log selector return_path_on_delivery was set, Exim crashed when
1741 bouncing a message because it had too many Received: header lines.
174320. If two routers both had headers_remove settings, and the first one included
1744 a superfluous trailing colon, the final name in the first list and the
1745 first name in the second list were incorrectly joined into one item (with a
1746 colon in the middle).
1749Exim version 4.32
1752 1. Added -C and -D options to the exinext utility, mainly to make it easier
1753 to include in the automated testing, but these could be helpful when
1754 multiple configurations are in use.
1756 2. The exinext utility was not formatting the output nicely when there was
1757 an alternate port involved in the retry record key, nor when there was a
1758 message id as well (for retries that were specific to a specific message
1759 and a specific host). It was also confused by IPv6 addresses, because of
1760 the additional colons they contain. I have fixed the IPv4 problem, and
1761 patched it up to do a reasonable job for IPv6.
1763 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1764 delivery, the log line now contains "pipelined" if PIPELINING was used.
1766 4. An SMTP transport process used to panic and die if the bind() call to set
1767 an explicit outgoing interface failed. This has been changed; it is now
1768 treated in the same way as a connect() failure.
1770 5. A reference to $sender_host_name in the part of a conditional expansion
1771 that was being skipped was still causing a DNS lookup. This no longer
1772 occurs.
1774 6. The def: expansion condition was not recognizing references to header lines
1775 that used bh_ and bheader_.
1777 7. Added the _cache feature to named lists.
1779 8. The code for checking quota_filecount in the appendfile transport was
1780 allowing one more file than it should have been.
1782 9. For compatibility with Sendmail, the command line option
1784 -prval:sval
1786 is equivalent to
1788 -oMr rval -oMs sval
1790 and sets the incoming protocol and host name (for trusted callers). The
1791 host name and its colon can be omitted when only the protocol is to be set.
1792 Note the Exim already has two private options, -pd and -ps, that refer to
1793 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1794 "s", but I don't think that's a major issue.
179610. A number of refactoring changes to the code, none of which should affect
1797 Exim's behaviour:
1799 (a) The number of logging options was getting close to filling up the
1800 32-bit word that was used as a bit map. I have split them into two classes:
1801 those that are passed in the argument to log_write(), and those that are
1802 only ever tested independently outside of that function. These are now in
1803 separate 32-bit words, so there is plenty of room for expansion again.
1804 There is no change in the user interface or the logging behaviour.
1806 (b) When building, for example, log lines, the code previously used a
1807 macro that called string_cat() twice, in order to add two strings. This is
1808 not really sufficiently general. Furthermore, there was one instance where
1809 it was actually wrong because one of the argument was used twice, and in
1810 one call a function was used. (As it happened, calling the function twice
1811 did not affect the overall behaviour.) The macro has been replaced by a
1812 function that can join an arbitrary number of extra strings onto a growing
1813 string.
1815 (c) The code for expansion conditions now uses a table and a binary chop
1816 instead of a serial search (which was left over from when there were very
1817 few conditions). Also, it now recognizes conditions like "pam" even when
1818 the relevant support is not compiled in: a suitably worded error message is
1819 given if an attempt is made to use such a condition.
182111. Added ${time_interval:xxxxx}.
182312. A bug was causing one of the ddress fields not to be passed back correctly
1824 from remote delivery subprocesses. The field in question was not being
1825 subsequently used, so this caused to problems in practice.
182713. Added new log selectors queue_time and deliver_time.
182914. Might have fixed a bug in maildirsizefile handling that threw up
1830 "unexpected character" debug warnings, and recalculated the data
1831 unnecessarily. In any case, I expanded the warning message to give more
1832 information.
183415. Added the message "Restricted characters in address" to the statements in
1835 the default ACL that block characters like @ and % in local parts.
183716. Change 71 for release 4.31 proved to be much less benign that I imagined.
1838 Three changes have been made:
1840 (a) There was a serious bug; a negative response to MAIL caused the whole
1841 recipient domain to be cached as invalid, thereby blocking all messages
1842 to all local parts at the same domain, from all senders. This bug has
1843 been fixed. The domain is no longer cached after a negative response to
1844 MAIL if the sender used is not empty.
1846 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1847 been restored.
1849 (c) A new callout option, "use_sender" has been added for people who want
1850 the modified behaviour.
1853Exim version 4.31
1856 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1857 Larry Rosenman.
1859 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1860 indeed breaks things for older releases.
1862 3. Added additional logging to the case where there is a problem reading data
1863 from a filter that is running in a subprocess using a pipe, in order to
1864 try to track down a specific problem.
1866 4. Testing facility fudge: when running in the test harness and attempting
1867 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1868 getting "No route to host". Convert this to a timeout.
1870 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1871 warning.
1873 6. Some OS don't have socklen_t but use size_t instead. This affects the
1874 fifth argument of getsockopt() amongst other things. This is now
1875 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1876 can be set for individual OS. I have set it for SunOS5, OSF1, and
1877 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1878 some earlier ones do not.
1880 7. Change 4.30/15 was not doing the test caselessly.
1882 8. The standard form for an IPv6 address literal was being rejected by address
1883 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1884 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1885 this, as well as the form without the "IPv6" on the front (but only when
1886 address literals are enabled, of course).
1888 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
189010. Exim crashed if a message with an empty sender address specified by -f
1891 encountered a router with an errors_to setting. This could be provoked only
1892 by a command such as
1894 exim -f "" ...
1896 where an empty string was supplied; "<>" did not hit this bug.
189811. Installed PCRE release 4.5.
190012. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1901 remained set. It is now erased.
190313. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1904 times from message ids (which are base 36 rather than the normal 62).
190614. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1907 were being counted as actual protocol errors, and logged if the log
1908 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1909 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1910 and DATA following a set of rejected RCPTs do not count as protocol errors.
1911 In other words, Exim assumes they were pipelined, though this may not
1912 actually be the case. Of course, in all cases the client gets an
1913 appropriate error code.
191515. If a lookup fails in an ACL condition, a message about the failure may
1916 be available; it is used if testing the ACL cannot continue, because most
1917 such messages specify what the cause of the deferral is. However, some
1918 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1919 that caused an old message to be retained and used if a later statement
1920 caused a defer, replacing the real cause of the deferral.
192216. If an IP address had so many PTR records that the DNS lookup buffer
1923 was not large enough to hold them, Exim could crash while trying to process
1924 the truncated data. It now detects and logs this case.
192617. Further to 4.21/58, another change has been made: if (and only if) the
1927 first line of a message (the first header line) ends with CRLF, a bare LF
1928 in a subsequent header line has a space inserted after it, so as not to
1929 terminate the header.
193118. Refactoring: tidied an ugly bit of code in appendfile that copied data
1932 unnecessarily, used atoi() instead of strtol(), and didn't check the
1933 termination when getting file sizes from file names by regex.
193519. Completely re-implemented the support for maildirsize files, in the light
1936 of a number of problems with the previous contributed implementation
1937 (4.30/29). In particular:
1939 . If the quota is zero, the maildirsize file is maintained, but no quota is
1940 imposed.
1942 . If the maildir directory does not exist, it is created before any attempt
1943 to write a maildirsize file.
1945 . The quota value in the file is just a cache; if the quota is changed in
1946 the transport, the new value overrides.
1948 . A regular expression is available for excluding directories from the
1949 count.
195120. The autoreply transport checks the characters in options that define the
1952 message's headers; it allows continued headers, but it was checking with
1953 isspace() after an embedded newline instead of explicitly looking for a
1954 space or a tab.
195621. If all the "regular" hosts to which an address was routed had passed their
1957 expiry times, and had not reached their retry times, the address was
1958 bounced, even if fallback hosts were defined. Now Exim should go on to try
1959 the fallback hosts.
196122. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1962 equivalent code in the SMTP transport. Some hosts send humungous responses
1963 to HELO/EHLO, more than 1024 it seems.
196523. Refactoring: code in filter.c used (void *) for "any old type" but this
1966 gives compiler warnings in some environments. I've now done it "properly",
1967 using a union.
196924. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1970 (because of problems with the built-in one) was declared to return uschar *
1971 instead of char *, causing compiler failure.
197325. Fixed a file descriptor leak when processing alias/forward files.
197526. Fixed a minor format string issue in dbfn.c.
197727. Typo in exim.c: ("dmbnz" for "dbmnz").
197928. If a filter file refered to $h_xxx or $message_headers, and the headers
1980 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1981 become corrupted.
198329. When a sender address is verified, it is cached, to save repeating the test
1984 when there is more than one recipient in a message. However, when the
1985 verification involves a callout, it is possible for different callout
1986 options to be set for different recipients. It is too complicated to keep
1987 track of this in the cache, so now Exim always runs a verification when a
1988 callout is required, relying on the callout cache for the optimization.
1989 The overhead is duplication of the address routing, but this should not be
1990 too great.
199230. Fixed a bug in callout caching. If a RCPT command caused the sender address
1993 to be verified with callout=postmaster, and the main callout worked but the
1994 postmaster check failed, the verification correctly failed. However, if a
1995 subsequent RCPT command asked for sender verification *without* the
1996 postmaster check, incorrect caching caused this verification also to fail,
1997 incorrectly.
199931. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
2000 it was not caching the DNS options (qualify_single, search_parents) that
2001 were used when the lookup failed. A subsequent lookup with different
2002 options therefore always gave the same answer, though there were cases
2003 where it should not have. (Example: a "domains = !$mx_any" option on a
2004 dnslookup router: the "domains" option is always processed without any
2005 widening, but the router might have qualify_single set.) Now Exim uses the
2006 cached value only when the same options are set.
200832. Added John Jetmore's "exipick" utility to the distribution.
201033. GnuTLS: When an attempt to start a TLS session fails for any reason other
2011 than a timeout (e.g. a certificate is required, and is not provided), an
2012 Exim server now closes the connection immediately. Previously it waited for
2013 the client to close - but if the client is SSL, it seems that they each
2014 wait for each other, leading to a delay before one of them times out.
201634: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
2017 maintained 0.8.x compatibility because I don't think many are using it, and
2018 it is clearly obsolete.
202035. Added TLS support for CRLs: a tls_crl global option and one for the smtp
2021 transport.
202336. OpenSSL: $tls_certificate_verified was being set to 1 even if the
2024 client certificate was expired. A simple patch fixes this, though I don't
2025 understand the full logic of why the verify callback is called multiple
2026 times.
202837. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
2029 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
2030 which causes problems with some clients (such as the Certicom SSL Plus
2031 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
2032 disables the coutermeasure allowing Eudora to connect."
203438. Exim was not checking that a write() to a log file succeeded. This could
2035 lead to Bad Things if a log got too big, in particular if it hit a file
2036 size limit. Exim now panics and dies if it cannot write to a log file, just
2037 as it does if it cannot open a log file.
203939. Modified OS/Makefile-Linux so that it now contains
2043 The two -D definitions ensure that Exim is compiled with large file
2044 support, which makes it possible to handle log files that are bigger than
2045 2^31.
204740. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
2048 instance) a domain was checked against a named list that involved a lookup,
2049 causing $domain_data to be set, then another domain was checked against the
2050 same list, then the first domain was re-checked, the value of $domain_data
2051 after the final check could be wrong. In particular, if the second check
2052 failed, it could be set empty. This bug probably also applied to
2053 $localpart_data.
205541. The strip_trailing_dot option was not being applied to the address given
2056 with the -f command-line option.
205842. The code for reading a message's header from the spool was incrementing
2059 $received_count, but never initializing it. This meant that the value was
2060 incorrect (doubled) while delivering a message in the same process in which
2061 it was received. In the most common configuration of Exim, this never
2062 happens - a fresh exec is done - but it can happen when
2063 deliver_drop_privilege is set.
206543. When Exim logs an SMTP synchronization error - client data sent too soon -
2066 it now includes up to 150 characters of the unexpected data in the log
2067 line.
206944. The exim_dbmbuild utility uses fixed size buffers for reading input lines
2070 and building data strings. The size of both of these buffers was 10 000
2071 bytes - far larger than anybody would *ever* want, thought I. Needless to
2072 say, somebody hit the limit. I have increased the maximum line length to
2073 20 000 and the maximum data length of concatenated lines to 100 000. I have
2074 also fixed two bugs, because there was no checking on these buffers. Tsk,
2075 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
2076 buffer is too small.
207845. The exim_dbmbuild utility did not support quoted keys, as Exim does in
2079 lsearch lookups. Now it does.
208146. When parsing a route_list item in a manualroute router, a fixed-length
2082 buffer was used for the list of hosts. I made this 1024 bytes long,
2083 thinking that nobody would ever have a list of hosts that long. Wrong.
2084 Somebody had a whole pile of complicated expansion conditions, and the
2085 string was silently truncated, leading to an expansion error. It turns out
2086 that it is easier to change to an unlimited length (owing to other changes
2087 that have happened since this code was originally written) than to build
2088 structure for giving a limitation error. The length of the item that
2089 expands into the list of hosts is now unlimited.
209147. The lsearch lookup could not handle data where the length of text line was
2092 more than 4095 characters. Such lines were truncated, leading to shortened
2093 data being returned. It should now handle lines of any length.
209548. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
2096 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
2097 ACL").
209949. Cosmetic tidy to scripts like exicyclog that are generated by globally
2100 replacing strings such as BIN_DIRECTORY in a source file: the replacement
2101 no longer happens in comment lines. A list of replacements is now placed
2102 at the head of all of the source files, except those whose only change is
2103 to replace PERL_COMMAND in the very first #! line.
210550. Replaced the slow insertion sort in queue.c, for sorting the list of
2106 messages on the queue, with a bottom-up merge sort, using code contributed
2107 by Michael Haardt. This should make operations like -bp somewhat faster on
2108 large queues. It won't affect queue runners, except when queue_run_in_order
2109 is set.
211151. Installed eximstats 1.31 in the distribution.
211352. Added support for SRV lookups to the dnslookup router.
211553. If an ACL referred to $message_body or $message_body_end, the value was not
2116 reset for any messages that followed in the same SMTP session.
211854. The store-handling optimization for building very long strings was not
2119 differentiating between the different store pools. I don't think this
2120 actually made any difference in practice, but I've tidied it.
212255. While running the routers to verify a sender address, $sender_address
2123 was still set to the sender address. This is wrong, because when routing to
2124 send a bounce to the sender, it would be empty. Therefore, I have changed
2125 it so that, while verifying a sender address, $sender_address is set to <>.
2126 (There is no change to what happens when verifying a recipient address.)
212856. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
2129 target A or AAAA records (if not already returned) without resetting the
2130 qualify_single or search_parents options of the DNS resolver. These are
2131 inappropriate in this case because the targets of MX and SRV records must
2132 be FQDNs. A broken DNS record could cause trouble if it happened to have a
2133 target that, when qualified, matched something in the local domain. These
2134 two options are now turned off when doing these lookups.
213657. It seems that at least some releases of Reiserfs (which does not have the
2137 concept of a fixed number of inodes) returns zero and not -1 for the
2138 number of available inodes. This interacted badly with check_spool_inodes,
2139 which assumed that -1 was the "no such thing" setting. What I have done is
2140 to check that the total number of inodes is greater than zero before doing
2141 the test of how many are available.
214358. When a "warn" ACL statement has a log_message modifier, the message is
2144 remembered, and not repeated. This is to avoid a lot of repetition when a
2145 message has many recipients that cause the same warning to be written.
2146 Howewer, Exim was preserving the list of already written lines for an
2147 entire SMTP session, which doesn't seem right. The memory is now reset if a
2148 new message is started.
215059. The "rewrite" debugging flag was not showing the result of rewriting in the
2151 debugging output unless log_rewrite was also set.
215360. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
2154 of (int)(handle) when we know that handle contains (void *)(-1).
215661. The Exim daemon panic-logs an error return when it closes the incoming
2157 connection. However "connection reset by peer" seems to be common, and
2158 isn't really an error worthy of noting specially, so that particular error
2159 is no long logged.
216162. When Exim is trying to find all the local interfaces, it used to panic and
2162 die if the ioctl to get the interface flags failed. However, it seems that
2163 on at least one OS (Solaris 9) it is possible to have an interface that is
2164 included in the list of interfaces, but for which you get a failure error
2165 for this call. This happens when the interface is not "plumbed" into a
2166 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
2167 failure of the "get flags" call assumes that the interface is down.
216963. Added a ${eval10: operator, which assumes all numbers are decimal. This
2170 makes life easier for people who are doing arithmetic on fields extracted
2171 from dates, where you often get leading zeros that should not be
2172 interpreted as octal.
217464. Added qualify_domain to the redirect router, to override the global
2175 setting.
217765. If a pathologically long header line contained very many addresses (the
2178 report of this problem mentioned 10 000) and each of them was rewritten,
2179 Exim could use up a very large amount of memory. (It kept on making new
2180 copies of the header line as it rewrote, and never released the old ones.)
2181 At the expense of a bit more processing, the header rewriting function has
2182 been changed so that it no longer eats memory in this way.
218466. The generation of the Received: header has been moved from the time that a
2185 message starts to be received, to the time that it finishes. The timestamp
2186 in the Received: header should now be very close to that of the <= log
2187 line. There are two side-effects of this change:
2189 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
2190 logged header lines no longer include the local Received: line, because
2191 it has not yet been created. The same applies to a copy of the message
2192 that is returned to a non-SMTP sender when a message is rejected.
2194 (b) When a filter file is tested using -bf, no additional Received: header
2195 is added to the test message. After some thought, I decided that this
2196 is a bug fix.
2198 This change does not affect the value of $received_for. It is still set
2199 after address rewriting, but before local_scan() is called.
220167. Installed the latest Cygwin-specific files from the Cygwin maintainer.
220368. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
2204 gave an unhelpful panic error message, and a defer error. I have managed to
2205 change this behaviour so that it now rejects any supplied certificate,
2206 which seems right, as the list of acceptable certificates is empty.
220869. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
2209 gave an unhelpful defer error. I have not managed to make this reject any
2210 supplied certificates, but the error message it gives is "no certificate
2211 supplied", which is not helpful.
221370. exigrep's output now also includes lines that are not associated with any
2214 message, but which match the given pattern. Implemented by a patch from
2215 Martin Sluka, which also tidied up the Perl a bit.
221771. Recipient callout verification, like sender verification, was using <> in
2218 the MAIL FROM command. This isn't really the right thing, since the actual
2219 sender may affect whether the remote host accepts the recipient or not. I
2220 have changed it to use the actual sender in the callout; this means that
2221 the cache record is now keyed on a recipient/sender pair, not just the
2222 recipient address. There doesn't seem to be a real danger of callout loops,
2223 since a callout by the remote host to check the sender would use <>.
2224 [SEE ABOVE: changed after hitting problems.]
222672. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
2227 temporary errors. However, in the case of such a code being given after
2228 the end of a data transmission (i.e. after ".") Exim was failing to write
2229 a retry record for the message. (Yes, there was some broken host that was
2230 actually sending 8xx at this point.)
223273. An unknown lookup type in a host list could cause Exim to panic-die when
2233 the list was checked. (An example that provoked this was putting <; in the
2234 middle of a list instead of at the start.) If this happened during a DATA
2235 ACL check, a -D file could be left lying around. This kind of configuration
2236 error no longer causes Exim to die; instead it causes a defer errror. The
2237 incident is still logged to the main and panic logs.
223974. Buglet left over from Exim 3 conversion. The message "too many messages
2240 in one connection" was written to the rejectlog but not the mainlog, except
2241 when address rewriting (yes!) was being logged.
224375. Added write_rejectlog option.
224576. When a system filter was run not as root (that is, when system_filter_user
2246 was set), the values of the $n variables were not being returned to the
2247 main process; thus, they were not subsequently available in the $sn
2248 variables.
225077. Added +return_path_on_delivery log selector.
225278. A connection timeout was being treated differently from recipients deferred
2253 when testing hosts_max_try with a message that was older than the host's
2254 retry timeout. (The host should not be counted, thus allowing all hosts to
2255 be tried at least once before bouncing.) This may have been the cause of an
2256 occasionally reported bug whereby a message would remain on the queue
2257 longer than the retry timeout, but would be bounced if a delivery was
2258 forced. I say "may" because I never totally pinned down the problem;
2259 setting up timeout/retry tests is difficult. See also the next item.
226179. The ultimate address timeout was not being applied to errors that involved
2262 a combination of host plus message (for example, a timeout on a MAIL
2263 command). When an address resolved to a number of possible hosts, and they
2264 were not all tried for each delivery (e.g. because of hosts_max_try), a
2265 message could remain on the queue longer than the retry timeout.
226780. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
2268 Haardt.
227081. Fixed an obscure SMTP outgoing bug which required at least the following
2271 conditions: (a) there was another message waiting for the same server;
2272 (b) the server returned 5xx to all RCPT commands in the first message so
2273 that the message was not completed; (c) the server dropped the connection
2274 or gave a negative response to the RSET that Exim sends to abort the
2275 transaction. The observed case was a dropped connection after DATA that had
2276 been sent in pipelining mode. That is, the server had advertised PIPELINING
2277 but was not implementing it correctly. The effect of the bug was incorrect
2278 behaviour, such as trying another host, and this could lead to a crash.
2281Exim version 4.30
2284 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
2285 and daemon.c were passed as pointers to ints; they should have been
2286 pointers to socklen_t variables (which are typically unsigned ints).
2288 2. Some signed/unsigned type warnings in the os.c file for Linux have been
2289 fixed.
2291 3. Fixed a really odd bug that affected only the testing scheme; patching a
2292 certain fixed string in the binary changed the value of another string that
2293 happened to be identical to the end of the original first string.
2295 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
2296 name", it returns that address as the IP address. On some operating
2297 systems (e.g. Solaris), it also passes back the IP address string as the
2298 "host name". However, on others (e.g. Linux), it passes back an empty
2299 string. Exim wasn't checking for this, and was changing the host name to an
2300 empty string, assuming it had been canonicized.
2302 5. Although rare, it is permitted to have more than one PTR record for a given
2303 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
2304 all the names associated with an address, because they do in Solaris.
2305 However, it seems that they do not in Linux for data that comes from the
2306 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
2307 I found this out when I moved to a new Linux workstation and tried to run
2308 the Exim test suite.
2310 To get round this problem I have changed the code so that it now does its
2311 own call to the DNS to look up PTR records when searching for a host name.
2312 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
2313 addresses that are only in /etc/hosts are still found.
2315 This behaviour is, however, controlled by an option called host_lookup_
2316 order, which defaults to "bydns:byaddr". If people want to use the other
2317 order, or indeed, just use one or the other means of lookup, they can
2318 specify it in this variable.
2320 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
2321 some operating systems, this comes back from gethostbyaddr() as an empty
2322 string, and this is what Exim used to test for. However, it seems that in
2323 other systems, "." is yielded. Exim now tests for this case too.
2325 7. The values of check_spool_space and check_log_space are now held internally
2326 as a number of kilobytes instead of an absolute number of bytes. If a
2327 numbers is specified without 'K' or 'M', it is rounded up to the nearest
2328 kilobyte. This means that much larger values can be stored.
2330 8. Exim monitor: an attempt to get the action menu when not actually pointing
2331 at a message produces an empty menu entitled "No message selected". This
2332 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
2333 no entries in it ("Shell widget menu has zero width and/or height"). So I
2334 have added a single, blank menu entry in this case.
2336 9. Added ${quote_local_part.
233810. MIME decoding is now applied to the contents of Subject: header lines when
2339 they are logged.
234111. Now that a reference to $sender_host_address automatically causes a reverse
2342 lookup to occur if necessary (4.13/18), there is no need to arrange for a
2343 host lookup before query-style lookups in lists that might use this
2344 variable. This has therefore been abolished, and the "net-" prefix is no
2345 longer necessary for query-style lookups.
234712. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
2348 have been a typo for LFLAGS, so it has been changed.
235013. The install script calls Exim with "-C /dev/null" in order to find the
2351 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
2352 to be output. Howeve, since Exim outputs its version number before the
2353 error, it didn't break the script. It just looked ugly. I fixed this by
2354 always allowing "-C /dev/null" if the caller is root.
235614. Ignore overlarge ACL variable number when reading spool file - insurance
2357 against a later release with more variables having written the file.
235915. The standard form for an IPv6 address literal was being rejected by EHLO.
2360 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
2361 this, as well as the form without the "IPv6" on the front.
236316. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
2364 OS/Makefile-Darwin file.
236617. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
2367 only to LDAP libraries that do not have LDAP_OPT_DEREF.
236918. After change 4.21/52, "%ld" was used to format the contents of the $inode
2370 variable. However, some OS use ints for inodes. I've added cast to long int
2371 to get rid of the compiler warning.
237319. I had forgotten to lock out "/../" in configuration file names when
2374 ALT_CONFIG_PREFIX was set.
237620. Routers used for verification do not need to specify transports. However,
2377 if such a router generated a host list, and callout was configured, Exim
2378 crashed, because it could not find a port number from the (non-existent)
2379 transport. It now assumes port 25 in this circumstance.
238121. Added the -t option to exigrep.
238322. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
2384 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
2385 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
2386 them is set, LOOKUP_LSEARCH is forced.
238823. "exim -bV" now outputs a list of lookups that are included in the binary.
239024. Added sender and host information to the "rejected by local_scan()" log
2391 line; previously there was no indication of these.
239325. Added .include_if_exists.
239526. Change 3.952/11 added an explicit directory sync on top of a file sync for
2396 Linux. It turns out that not all file systems support this. Apparently some
2397 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
2398 do it.) To cope with this, the error EINVAL, which means that sync-ing is
2399 not supported on the file descriptor, is now ignored when Exim is trying to
2400 sync a directory. This applies only to Linux.
240227. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
240428. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
2405 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
2406 this.
240829. Added support for maildirsize files from supplied patch (modified a bit).
241030. The use of :fail: followed by an empty string could lead Exim to respond to
2411 sender verification failures with (e.g.):
2413 550 Verification failed for <xxx>
2414 550 Sender verify failed
2416 where the first response line was missing the '-' that indicates it is not
2417 the final line of the response.
241931. The loop for finding the name of the user that called Exim had a hardwired
2420 limit of 10; it now uses the value of finduser_retries, which is used for
2421 all other user lookups.
242332. Added $received_count variable, available in data and not_smtp ACLs, and at
2424 delivery time.
242633. Exim was neglecting to zero errno before one call of strtol() when
2427 expanding a string and expecting an integer value. On some systems this
2428 resulted in spurious "integer overflow" errors. Also, it was casting the
2429 result into an int without checking.
243134. Testing for a connection timeout using "timeout_connect" in the retry rules
2432 did not work. The code looks as if it has *never* worked, though it appears
2433 to have been documented since at least releast 1.62. I have made it work.
243535. The "timeout_DNS" error in retry rules, also documented since at least
2436 1.62, also never worked. As it isn't clear exactly what this means, and
2437 clearly it isn't a major issue, I have abolished the feature by treating it
2438 as "timeout", and writing a warning to the main and panic logs.
244036. The display of retry rules for -brt wasn't always showing the error code
2441 correctly.
244337. Added new error conditions to retry rules: timeout_A, timeout_MX,
2444 timeout_connect_A, timeout_connect_MX.
244638. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
2447 to the empty sender.
244939. The daemon was not analysing the content of -oX till after it had closed
2450 stderr and disconnected from the controlling terminal. This meant that any
2451 syntax errors were only noted on the panic log, and the return code from
2452 the command was 0. By re-arranging the code a little, I've made the
2453 decoding happen first, so such errors now appear on stderr, and the return
2454 code is 1. However, the actual setting up of the sockets still happens in
2455 the disconnected process, so errors there are still only recorded on the
2456 panic log.
245840. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
2459 connections (as happens on some IP stacks) was logged at start up time as
2460 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
2461 it from "IPv6 and IPv4", which means that two separate sockets are being
2462 used.
246441. The debug output for gethostbyname2() or getipnodebyname() failures now
2465 says whether AF_INET or AF_INET6 was passed as an argument.
246742. Exiwhat output was messed up when time zones were included in log
2468 timestamps.
247043. Exiwhat now gives more information about the daemon's listening ports,
2471 and whether -tls-on-connect was used.
247344. The "port" option of the smtp transport is now expanded.
247545. A "message" modifier in a "warn" statement in a non-message ACL was being
2476 silently ignored. Now an error message is written to the main and panic
2477 logs.
247946. There's a new ACL modifier called "logwrite" which writes to a log file
2480 as soon as it is encountered.
248247. Added $local_user_uid and $local_user_gid at routing time.
248448. Exim crashed when trying to verify a sender address that was being
2485 rewritten to "<>".
248749. Exim was recognizing only a space character after ".include". It now also
2488 recognizes a tab character.
249050. Fixed several bugs in the Perl script that creates the exim.8 man page by
2491 extracting the relevant information from the specification. The man page no
2492 longer contains scrambled data for the -d option, and I've added a section
2493 at the front about calling Exim under different names.
249551. Added "extra_headers" argument to the "mail" command in filter files.
249752. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
2498 crash.
250053. Installed eximstats 1.29.
250254. Added transport_filter_timeout as a generic transport option.
250455. Exim no longer adds an empty Bcc: header to messages that have no To: or
2505 Cc: header lines. This was required by RFC 822, but it not required by RFC
2506 2822.
250856. Exim used to add From:, Date:, and Message-Id: header lines to any
2509 incoming messages that did not have them. Now it does so only if the
2510 message originates locally, that is, if there is no associated remote host
2511 address. When Resent- header lines are present, this applies to the Resent-
2512 lines rather than the non-Resent- lines.
251457. Drop incoming SMTP connection after too many syntax or protocol errors. The
2515 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
251758. Messages for configuration errors now include the name of the main
2518 configuration file - useful now that there may be more than one file in a
2519 list (.included file names were always shown).
252159. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
2522 for those rare installations that do not start the daemon as root or run it
2523 setuid root. I've cut out the call to initgroups() if the daemon is not
2524 root at that time.
252660. The Exim user and group can now be bound into the binary as text strings
2527 that are looked up at the start of Exim's processing.
252961. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
253162. Added $mailstore_basename variable.
253363. Installed patch to sieve.c from Michael Haardt.
253564. When Exim failed to open the panic log after failing to open the main log,
2536 the original message it was trying to log was written to stderr and debug
2537 output, but if they were not available (the usual case in production), it
2538 was lost. Now it is written to syslog before the two lines that record the
2539 failures to open the logs.
254165. Users' Exim filters run in subprocesses under the user's uid. It is
2542 possible for a "deliver" command or an alias in a "personal" command to
2543 provoke an address rewrite. If logging of address rewriting is configured,
2544 this fails because the process is not running as root or exim. There may be
2545 a better way of dealing with this, but for the moment (because 4.30 needs
2546 to be released), I have disabled address rewrite logging when running a
2547 filter in a non-root, non-exim process.
2550Exim version 4.24
2553 1. The buildconfig auxiliary program wasn't quoting the value set for
2554 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
2555 not defined. This bug was masked in 4.22 by the effect that was fixed in
2556 change 4.23/1.
2558 2. Some messages that were rejected after a message id was allocated were
2559 shown as "incomplete" by exigrep. It no longer does this for messages that
2560 are rejected by local_scan() or the DATA or non-SMTP ACLs.
2562 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
2563 have allow_domain_literals set, the ID did not get logged in the <= line.
2564 Domain literals are now always recognized in Message-ID: header lines.
2566 4. The first argument for a ${extract expansion item is the key name or field
2567 number. Leading and trailing spaces in this item were not being ignored,
2568 causing some misleading effects.
2570 5. When deliver_drop_privilege was set, single queue runner processes started
2571 manually (i.e. by the command "exim -q") or by the daemon (which uses the
2572 same command in the process it spins off) were not dropping privilege.
2574 6. When the daemon running as "exim" started a queue runner, it always
2575 re-executed Exim in the spun-off process. This is a waste of effort when
2576 deliver_drop_privilege is set. The new process now just calls the
2577 queue-runner function directly.
2580Exim version 4.23
2583 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2586 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2587 ignored. Though the use of -oP was forcing the writing of a pid file, it
2588 was always written to the default place.
2590 3. If the message "no IP address found for host xxxx" is generated during
2591 incoming verification, it is now followed by identification of the incoming
2592 connection (so you can more easily find what provoked it).
2594 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2596 5. Added some features to "harden" Exim a bit more against certain attacks:
2598 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2599 be put in Local/Makefile. This is like the never_users runtime option,
2600 but it cannot be overridden. The default setting is "root".
2602 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2603 prefix string with which any file named in a -C command line option
2604 must start.
2606 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2607 is retained for -C and -D only if the caller of Exim is root. Without
2608 it, the exim user may also use -C and -D and retain privilege.
2610 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2611 command line option is disabled.
2613 6. Macro names set by the -D option must start with an upper case letter, just
2614 like macro names defined in the configuration file.
2616 7. Added "dereference=" facility to LDAP.
2618 8. Two instances of the typo "uknown" in the source files are fixed.
2620 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2621 the Configure-Makefile script screwed up while processing it.
262310. Incorporated PCRE 4.4.
262511. The SMTP synchronization check was not operating right at the start of an
2626 SMTP session. For example, it could not catch a HELO sent before the client
2627 waited for the greeting. There is now a check for outstanding input at the
2628 point when the greeting is written. Because of the duplex, asynchronous
2629 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2630 way, but not yet received, when the check is performed.
263212. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2633 on TCP/IP sockets, because this apparently causes some broken clients to
2634 timeout.
263613. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2637 unchanged) from the Cygwin maintainer.
263914. The code for -bV that shows what is in the binary showed "mbx" when maildir
2640 was supported instead of testing for mbx. Effectively a typo.
264215. The spa authenticator server code was not checking that the input it
2643 received was valid base64.
264516. The debug output line for the "set" modifier in ACLs was not showing the
2646 name of the variable that was being set.
264817. Code tidy: the variable type "vtype_string" was never used. Removed it.
265018. Previously, a reference to $sender_host_name did not cause a DNS reverse
2651 lookup on its own. Something else was needed to trigger the lookup. For
2652 example, a match in host_lookup or the need for a host name in a host list.
2653 Now, if $sender_host_name is referenced and the host name has not yet been
2654 looked up, a lookup is performed. If the lookup fails, the variable remains
2655 empty, and $host_lookup_failed is set to "1".
265719. Added "eqi" as a case-independent comparison operator.
265920. The saslauthd authentication condition could segfault if neither service
2660 nor realm was specified.
266221. If an overflowing value such as "2048M" was set for message_size_limit, the
2663 error message that was logged was misleading, and incoming SMTP
2664 connections were dropped. The message is now more accurate, and temporary
2665 errors are given to SMTP connections.
266722. In some error situations (such as 21 above) Exim rejects all SMTP commands
2668 (except RSET) with a 421 error, until QUIT is received. However, it was
2669 failing to send a response to QUIT.
267123. The HELO ACL was being run before the code for helo_try_verify_hosts,
2672 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2673 ACL is now run after the helo_try_verify_hosts code.
267524. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2676 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2677 case-independent, so other case variants are also recognized). Apparently
2678 some systems use these upper case variants.
268025. If more than two messages were waiting for the same host, and a transport
2681 filter was specified for the transport, Exim sent two messages over the
2682 same TCP/IP connection, and then failed with "socket operation on non-
2683 socket" when it tried to send the third.
268526. Added Exim::debug_write and Exim::log_write for embedded Perl use.
268727. The extern definition of crypt16() in expand.c was not being excluded when
2688 the OS had its own crypt16() function.
269028. Added bounce_return_body as a new option, and bounce_return_size_limit
2691 as a preferred synonym for return_size_limit, both as an option and as an
2692 expansion variable.
269429. Added LIBS=-liconv to OS/Makefile-OSF1.
269630. Changed the default configuration ACL to relax the local part checking rule
2697 for addresses that are not in any local domains. For these addresses,
2698 slashes and pipe symbols are allowed within local parts, but the sequence
2699 /../ is explicitly forbidden.
270131. SPA server authentication was not clearing the challenge buffer before
2702 using it.
270432. log_message in a "warn" ACL statement was writing to the reject log as
2705 well as to the main log, which contradicts the documentation and doesn't
2706 seem right (because no rejection is happening). So I have stopped it.
270833. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2709 However, I am unable to do any testing of this.
271134. Fixed an infelicity in the appendfile transport. When checking directories
2712 for a mailbox, to see if any needed to be created, it was accidentally
2713 using path names with one or more superfluous leading slashes; tracing
2714 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
271635. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2717 contents are added to the log line that is written for every discarded
2718 recipient. (Previously a log_message setting was ignored.)
272036. The ${quote: operator now quotes the string if it is empty.
272237. The install script runs exim in order to find its version number. If for
2723 some reason other than non-existence or emptiness, which it checks, it
2724 could not run './exim', it was installing it with an empty version number,
2725 i.e. as "exim-". This error state is now caught, and the installation is
2726 aborted.
272838. An argument was missing from the function that creates an error message
2729 when Exim fails to connect to the socket for saslauthd authentication.
2730 This could cause Exim to crash, or give a corrupted message.
273239. Added isip, isip4, and isip6 to ${if conditions.
273440. The ACL variables $acl_xx are now saved with the message, and can be
2735 accessed later in routers, transports, and filters.
273741. The new lookup type nwildlsearch is like wildlsearch, except that the key
2738 strings in the file are not string-expanded.
274042. If a MAIL command specified a SIZE value that was too large to fit into an
2741 int variable, the check against message_size_limit failed. Such values are
2742 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2743 day this will have to be increased, but I don't think I want to be around
2744 when emails are that large.
2748Exim version 4.22
2751 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2752 iconv() is not standard in FreeBSD.
2754 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2755 IPv6 enabled. The observed symptom was a segmentation fault on return from
2756 the function os_common_find_running_interfaces() in src/os.c.
2758 3. In the check_special_case() function in daemon.c I had used "errno" as an
2759 argument name, which causes warnings on some systems. This was basically a
2760 typo, since it was named "eno" in the comments!
2762 4. The code that waits for the clock to tick (at a resolution of some fraction
2763 of a second) so as to ensure message-id uniqueness was always waiting for
2764 at least one whole tick, when it could have waited for less. [This is
2765 almost certainly not relevant at current processor speeds, where it is
2766 unlikely to ever wait at all. But we try to future-proof.]
2768 5. The function that sleeps for a time interval that includes fractions of a
2769 second contained a race. It did not block SIGALRM between setting the
2770 timer, and suspending (a couple of lines later). If the interval was short
2771 and the sigsuspend() was delayed until after it had expired, the suspension
2772 never ended. On busy systems this could lead to processes getting stuck for
2773 ever.
2775 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2776 process, before it forks any delivery processes. The open lookup caching
2777 mechanism meant that the open file or database connection was passed into
2778 the delivery process. The problem was that delivery processes always tidy
2779 up cached lookup data. This could cause a problem for the next delivery
2780 process started by the queue runner, because the external queue runner
2781 process does not know about the closure. So the next delivery process
2782 still has data in the lookup cache. In the case of a file lookup, there was
2783 no problem because closing a file descriptor in a subprocess doesn't affect
2784 the parent. However, if the lookup was caching a connection to a database,
2785 the connection was closed, and the second delivery process was likely to
2786 see errors such as "PGSQL: query failed: server closed the connection
2787 unexpectedly". The problem has been fixed by closing all cached lookups
2788 in a queue runner before running a delivery process.
2790 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2791 seem to have the "const" qualifier which it has on other OS. I've
2792 parameterised it.
2794 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2795 *of the same type* (client or server) with the same public name that an
2796 error should be diagnosed.
2798 9. When Exim looked up a host name for an IP address, but failed to find the
2799 original IP address when looking up the host name (a safety check), it
2800 output the message "<ip address> does not match any IP for NULL", which was
2801 confusing, to say the least. The bug was that the host name should have
2802 appeared instead of "NULL".
280410. Since release 3.03, if Exim is called by a uid other than root or the Exim
2805 user that is built into the binary, and the -C or -D options is used, root
2806 privilege is dropped before the configuration file is read. In addition,
2807 logging is switched to stderr instead of the normal log files. If the
2808 configuration then re-defines the Exim user, the unprivileged environment
2809 is probably not what is expected, so Exim logs a panic warning message (but
2810 proceeds).
2812 However, if deliver_drop_privilege is set, the unprivileged state may well
2813 be exactly what is intended, so the warning has been cut out in that case,
2814 and Exim is allowed to try to write to its normal log files.
2817Exim version 4.21
2820 1. smtp_return_error_details was not giving details for temporary sender
2821 or receiver verification errors.
2823 2. Diagnose a configuration error if two authenticators have the same public
2824 name.
2826 3. Exim used not to create the message log file for a message until the first
2827 delivery attempt. This could be confusing when incoming messages were held
2828 for policy or load reasons. The message log file is now created at the time
2829 the message is received, and an initial "Received" line is written to it.
2831 4. The automatically generated man page for command line options had a minor
2832 bug that caused no ill effects; however, a more serious problem was that
2833 the procedure for building the man page automatically didn't always
2834 operate. Consequently, release 4.20 contains an out-of-date version. This
2835 shouldn't happen again.
2837 5. When building Exim with embedded Perl support, the script that builds the
2838 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2839 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2841 6. The freeze_tell option was not being used for messages that were frozen on
2842 arrival, either by an ACL or by local_scan().
2844 7. Added the smtp_incomplete_transaction log selector.
2846 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2847 was accepting AUTH without a new EHLO.
2849 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2850 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2851 RFC.
285310. Logging of TCP/IP connections (when configured) now happens in the main
2854 daemon process instead of the child process, so that the TCP/IP connection
2855 count is more accurate (but it can never be perfect).
285711. The use of "drop" in a nested ACL was not being handled correctly in the
2858 outer ACL. Now, if condition failure induced by the nested "drop" causes
2859 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2860 or "require"), the connection is dropped.
286212. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2863 that yield "discard" can now be used with an "accept" or a "discard" verb,
2864 but an error is generated for any others (because I can't see a useful way
2865 to define what should happen).
286713. When an ACL is read dynamically from a file (or anywhere else), the lines
2868 are now processed in the same way as lines in the Exim configuration file.
2869 In particular, continuation lines are supported.
287114. Added the "dnslists = a.b.c!=n.n.n.n" feature.
287315. Added -ti meaning -t -i.
287516. Check for letters, digits, hyphens, and dots in the names of dnslist
2876 domains, and warn by logging if others are found.
287817. At least on BSD, alignment is not guarenteed for the array of ifreq's
2879 returned from GIFCONF when Exim is trying to find the list of interfaces on
2880 a host. The code in os.c has been modified to copy each ifreq to an aligned
2881 structure in all cases.
2883 Also, in some cases, the returned ifreq's were being copied to a 'struct
2884 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2885 means the last couple of bytes of an IPv6 address could be chopped if the
2886 ifreq contained only a normal sockaddr (14 bytes storage).
288818. Named domain lists were not supported in the hosts_treat_as_local option.
2889 An entry such as +xxxx was not recognized, and was treated as a literal
2890 domain name.
289219. Ensure that header lines added by a DATA ACL are included in the reject log
2893 if the ACL subsequently rejects the message.
289520. Upgrade the utility script to use Digest::MD5 instead of just
2896 MD5 (which is deprecated).
289821. When testing a filter file using -bf, Exim was writing a message when it
2899 took the sender from a "From " line in the message, but it was not doing so
2900 when it took $return_path from a Return-Path: header line. It now does.
290222. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2903 with a valid header line field name (a series of printing characters
2904 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
290623. Changed "disc" in the source to "disk" to conform to the documentation and
2907 the book and for uniformity.
290924. Ignore Sendmail's -Ooption=value command line item.
291125. When execve() failed while trying to run a command in a pipe transport,
2912 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2913 could be confused with a return value of 69 from the command itself. This
2914 has been changed to 127, the value the shell returns if it is asked to run
2915 a non-existent command. The wording for the related log line suggests a
2916 non-existent command as the problem.
291826. If received_header_text expands to an empty string, do not add a Received:
2919 header line to the message. (Well, it adds a token one on the spool, but
2920 marks it "old" so that it doesn't get used or transmitted.)
292227. Installed eximstats 1.28 (addition of -nt option).
292428. There was no check for failure on the call to getsockname() in the daemon
2925 code. This can fail if there is a shortage of resources on the system, with
2926 ENOMEM, for example. A temporary error is now given on failure.
292829. Contrary to the C standard, it seems that in some environments, the
2929 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2930 program. Exim now does this explicitly; it affects the formatting of
2931 timestamps using strftime().
293330. If exiqsumm was given junk data, it threw up some uninitialized variable
2934 complaints. I've now initialized all the variables, to avoid this.
293632. Header lines added by a system filter were not being "seen" during
2937 transport-time rewrites.
293933. The info_callback() function passed to OpenSSL is set up with type void
2940 (*)(SSL *, int, int), as described somewhere. However, when calling the
2941 function (actually a macro) that sets it up, the type void(*)() is
2942 expected. I've put in a cast to prevent warnings from picky compilers.
294434. If a DNS black list lookup found a CNAME record, but there were no A
2945 records associated with the domain it pointed at, Exim crashed.
294735. If a DNS black list lookup returned more than one A record, Exim ignored
2948 all but the first. It now scans all returned addresses if a particular IP
2949 value is being sought. In this situation, the contents of the
2950 $dnslist_value variable are a list of all the addresses, separated by a
2951 comma and a space.
295336. Tightened up the rules for host name lookups using reverse DNS. Exim used
2954 to accept a host name and all its aliases if the forward lookup for any of
2955 them yielded the IP address of the incoming connection. Now it accepts only
2956 those names whose forward lookup yields the correct IP address. Any other
2957 names are discarded. This closes a loophole whereby a rogue DNS
2958 administrator could create reverse DNS records to break through a
2959 wildcarded host restriction in an ACL.
296137. If a user filter or a system filter that ran in a subprocess used any of
2962 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2963 the wrong values were passed to the pipe command ($thisaddress had the
2964 value of $0, $0 had the value of $1, etc). This bug was introduced by
2965 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
296738. Improved the line breaking for long SMTP error messages from ACLs.
2968 Previously, if there was no break point between 40 and 75 characters, Exim
2969 left the rest of the message alone. Two changes have been made: (a) I've
2970 reduced the minimum length to 35 characters; (b) if it can't find a break
2971 point between 35 and 75 characters, it looks ahead and uses the first one
2972 that it finds. This may give the occasional overlong line, but at least the
2973 remaining text gets split now.
297539. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2976 file descriptors might be low, and that setting 1000 would always raise it.
2977 It turns out that in some environments, the limit is already over 1000 and
2978 that lowering it causes trouble. So now Exim takes care not to decrease it.
298040. When delivering a message, the value of $return_path is set to $sender_
2981 address at the start of routing (routers may change the value). By an
2982 oversight, this default was not being set up when an address was tested by
2983 -bt or -bv, which affected the outcome if any router or filter referred to
2984 $return_path.
298641. The idea of the "warn" ACL verb is that it adds a header or writes to the
2987 log only when "message" or "log_message" are set. However, if one of the
2988 conditions was an address verification, or a call to a nested ACL, the
2989 messages generated by the underlying test were being passed through. This
2990 no longer happens. The underlying message is available in $acl_verify_
2991 message for both "message" and "log_message" expansions, so it can be
2992 passed through if needed.
299442. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2995 new expansion $bh_ to give the encoded byte string without charset
2996 translation. Translation happens only if iconv() is available; HAVE_ICONV
2997 indicates this at build time. HEADERS_CHARSET gives the charset to
2998 translate to; headers_charset can change it in the configuration, and
2999 "headers charset" can change it in an individual filter file.
300143. Now that we have a default RFC 2047 charset (see above), the code in Exim
3002 that creates RFC 2047 encoded "words" labels them as that charset instead
3003 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
3004 expansion operator; (ii) when Exim creates a From: line for a local
3005 message; (iii) when a header line is rewritten to include a "phrase" part.
300744. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
3008 buggy, causing it to skip the first lines of messages whose message ID
3009 ended in 'D'. This would not have bitten before Exim release 4.14, because
3010 message IDs were unlikely to end in 'D' before then. The effect was to have
3011 incorrect size information for certain domains.
301345. #include "config.h" was missing at the start of the crypt16.c module. This
3014 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
3015 noticed.
301746. If there was a timeout during a "random" callout check, Exim treated it as
3018 a failure of the random address, and carried on sending RSET and the real
3019 address. If the delay was just some slowness somewhere, the response to the
3020 original RCPT would be taken as a response to RSET and so on, causing
3021 mayhem of various kinds.
302347. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
3024 when I implemented it. It didn't allow for the fact that some option values
3025 may legitimatetly be negative (e.g. size_addition), and it didn't even do
3026 the right test for positive values.
302848. Domain names in DNS records are case-independent. Exim always looks them up
3029 in lower case. Some resolvers return domain names in exactly the case they
3030 appear in the zone file, that is, they may contain uppercase letters. Not
3031 all resolvers do this - some return always lower case. Exim was treating a
3032 change of case by a resolver as a change of domain, similar to a widening
3033 of a domain abbreviation. This triggered its re-routing code and so it was
3034 trying to route what was effectively the same domain again. This normally
3035 caused routing to fail (because the router wouldn't handle the domain
3036 twice). Now Exim checks for this case specially, and just changes the
3037 casing of the domain that it ultimately uses when it transmits the message
3038 envelope.
304049. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
3041 module.
304350. If a filter generated a file delivery with a non-absolute name (possible if
3044 no home directory exists for the router), the forbid_file option was not
3045 forbidding it.
304751. Added '&' feature to dnslists, to provide bit mask matching in addition to
3048 the existing equality matching.
305052. Exim was using ints instead of ino_t variables in some places where it was
3051 dealing with inode numbers.
305353. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
3054 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
3055 called TMPDIR, and if it finds it is different, it changes its value.
305754. The smtp_printf() function is now made available to local_scan() so
3058 additional output lines can be written before returning. There is also an
3059 smtp_fflush() function to enable the detection of a dropped connection.
3060 The variables smtp_input and smtp_batched_input are exported to
3061 local_scan().
306355. Changed the default runtime configuration: the message "Unknown user"
3064 has been removed from the ACL, and instead placed on the localuser router,
3065 using the cannot_route_message feature. This means that any verification
3066 failures that generate their own messages won't get overridden. Similarly,
3067 the "Unrouteable address" message that was in the ACL for unverifiable
3068 relay addresses has also been removed.
307056. Added hosts_avoid_esmtp to the smtp transport.
307257. The exicyclog script was not checking for the esoteric option
3073 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
3074 will work only if exicyclog is run under the appropriate euid.
307658. Following a discussion on the list, the rules by which Exim recognises line
3077 endings on incoming messages have been changed. The -dropcr and drop_cr
3078 options are now no-ops, retained only for backwards compatibility. The
3079 following line terminators are recognized: LF CRLF CR. However, special
3080 processing applies to CR:
3082 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
3083 nor a local message in the state where . is a terminator.
3085 (ii) If a bare CR is encountered in a header line, an extra space is added
3086 after the line terminator so as not to end the header. The reasoning
3087 behind this is that bare CRs in header lines are most likely either
3088 to be mistakes, or people trying to play silly games.
309059. The size of a message, as listed by "-bp" or in the Exim monitor window,
3091 was being incorrectly given as 18 bytes larger than it should have been.
3092 This is a VOB (very old bug).
309460. This may never have affected anything current, but just in case it has:
3095 When the local host is found other than at the start of a list of hosts,
3096 the local host, those with the same MX, and any that follow, are discarded.
3097 When the list in question was part of a longer list of hosts, the following
3098 hosts (not currently being processed) were also being discarded. This no
3099 longer happens. I'm not sure if this situation could ever has previously
3100 arisen.
310261. Added the "/MX" feature to lists of hosts in the manualroute and query
3103 program routers.
310562. Whenever Exim generates a new message, it now adds an Auto-Submitted:
3106 header. This is something that is recommended in a new Internet Draft, and
3107 is something that is documented as being done by Sendmail. There are two
3108 possible values. For messages generated by the autoreply transport, Exim
3109 adds:
3111 Auto-Submitted: auto-replied
3113 whereas for all other generated messages (e.g. bounces) it adds
3115 Auto-Submitted: auto-generated
311763. The "personal" condition in filters now includes a test for the
3118 Auto-Submitted: header. If it contains the string "auto-" the message it
3119 not considered personal.
312164. Added rcpt_include_affixes as a generic transport option.
312365. Added queue_only_override (default true).
312566. Added the syslog_duplication option.
312767. If what should have been the first header line of a message consisted of
3128 a space followed by a colon, Exim was mis-interpreting it as a header line.
3129 It isn't of course - it is syntactically invalid and should therefore be
3130 treated as the start of the message body. The misbehaviour could have
3131 caused a number of strange effects, including loss of data in subsequent
3132 header lines, and spool format errors.
313468. Formerly, the AUTH parameter on a MAIL command was trusted only if the
3135 client host had authenticated. This control can now be exercised by an ACL
3136 for more flexibility.
313869. By default, callouts do not happen when testing with -bh. There is now a
3139 variant, -bhc, which does actually run the callout code, including
3140 consulting and updating the callout cache.
314270. Added support for saslauthd authentication, courtesy of Alexander
3143 Sabourenkov.
314571. If statvfs() failed on the spool or log directories while checking their
3146 size for availability, Exim confusingly gave the error "space shortage".
3147 Furthermore, in debugging mode it crashed with a floating point exception.
3148 These checks are done if check_{spool,log}_{space,inodes} are set, and when
3149 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
3150 serious problem, Exim now writes to the main and panic logs when this
3151 happens, with details of the failure. It then refuses to accept the
3152 incoming message, giving the message "spool directory problem" or "log
3153 directory problem" with a 421 code for SMTP messages.
315572. When Exim is about to re-exec itself, it ensures that the file descriptors
3156 0, 1, and 2 exist, because some OS complain for execs without them (see
3157 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
3158 descriptors. However, the code omitted to check that the open succeeded,
3159 causing mysterious errors if for some reason the permissions on /dev/null
3160 got screwed. Now Exim writes a message to the main and panic logs, and
3161 bombs out if it can't open /dev/null.
316373. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
3164 interact so that it is all more flexible. It is supposed to remain
3165 backwards compatible. Also added extra_local_interfaces.
316774. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
3168 to bomb out with an assertion failure - to the client this appears as a
3169 connection drop. This problem occurs in the part of the code that was taken
3170 from the Samba project. Fortunately, the assertion is in a very simple
3171 function, so I have fixed this by reproducing the function inline in the
3172 one place where it is called, and arranging for authentication to fail
3173 instead of killing the process with assert().
317575. The SPA client code was not working when the server requested OEM rather
3176 than Unicode encoding.
317876. Added code to make require_files with a specific uid setting more usable in
3179 the case where statting the file as root fails - usually a non-root-mounted
3180 NFS file system. When this happens and the failure is EACCES, Exim now
3181 forks a subprocess and does the per-uid checking as the relevant uid.
318377. Added process_log_path.
318578. If log_file_path was not explicitly set, a setting of check_log_space or
3186 check_log_inodes was ignored.
318879. If a space check for the spool or log partitions fails, the incident is now
3189 logged. Of course, in the latter case the data may get lost...
319180. Added the %p formatting code to string_format() so that it can be used to
3192 print addresses in debug_print(). Adjusted all the address printing in the
3193 debugging in store.c to use %p rather than %d.
319581. There was a concern that a line of code in smtp_in.c could overflow a
3196 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
3197 initially expressed, the concern was not well-founded, because trailing
3198 spaces are removed early. However, if the trailing spaces were followed by
3199 a NULL, they did not get removed, so the overflow was possible. Two fixes
3200 were applied:
3202 (a) I re-wrote the offending code in a cleaner fashion.
3203 (b) If an incoming SMTP command contains a NULL character, it is rejected
3204 as invalid.
320682. When Exim changes uid/gid to the Exim user at daemon start time, it now
3207 runs initgroups(), so that if the Exim user is in any additional groups,
3208 they will be used during message reception.
3211Exim version 4.20
3214The change log for 4.20 and earlier releases has been archived.