Tidy up Exim's PCRE Makefile to generate tidier output like the other
[exim.git] / doc / doc-txt / ChangeLog
5ea81592 1$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.162 2005/06/17 10:47:05 ph10 Exp $
3Change log file for Exim from version 4.21
bbe902f0 6
7Exim version 4.52
10TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
12PH/01 When a transport filter timed out in a pipe delivery, and the pipe
13 command itself ended in error, the underlying message about the transport
14 filter timeout was being overwritten with the pipe command error. Now the
15 underlying error message should be appended to the second error message.
17TK/01 Fix poll() being unavailable on Mac OSX 10.2.
19PH/02 Reduce the amount of output that "make" produces by default. Full output
20 can still be requested.
22PH/03 The warning log line about a condition test deferring for a "warn" verb
23 was being output only once per connection, rather than after each
24 occurrence (because it was using the same function as for successful
25 "warn" verbs). This seems wrong, so I have changed it.
27TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
28 it should not have, which might have caused a crash in the right
29 circumstances, but probably never did.
31PH/04 Installed a modified version of Tony Finch's patch to make submission
32 mode fix the return path as well as the Sender: header line, and to
33 add a /name= option so that you can make the user's friendly name appear
34 in the header line.
36TF/03 Added the control = fakedefer ACL modifier.
38TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
39 Mark Lowes for thorough testing.
870f6ba8 40
41TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
43TK/03 Merged latest SRS patch from Miles Wilton.
45PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
46 with the definition in sysexits.h (which is #included earlier).
47 Fortunately, Exim does not actually use EX_OK. The code used to try to
48 preserve the sysexits.h value, by assumimg that macro definitions were
49 scanned for macro replacements. I have been disabused of this notion,
50 so now the code just undefines EX_OK before #including unistd.h.
11d337a4 51
52PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
53 in the smtp transport. When a block could not be written in a single
54 write() function, the timeout was being re-applied to each part-write.
55 This seems wrong - if the receiver was accepting one byte at a time it
56 would take for ever. The timeout is now adjusted when this happens. It
57 doesn't have to be particularly precise.
59TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
60 details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
62PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
63 without a domain if the check to <postmaster@domain> fails.
65SC/01 Eximstats: added -xls and the ability to specify output files
66 (patch written by Frank Heydlauf).
68SC/02 Eximstats: use FileHandles for outputing results.
70SC/03 Eximstats: allow any combination of xls, txt, and html output.
72SC/04 Eximstats: fixed display of large numbers with -nvr option
74SC/05 Eximstats: fixed merging of reports with empty tables.
76SC/06 Eximstats: added the -include_original_destination flag
78SC/07 Eximstats: removed tabs and trailing whitespace.
80TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
82TK/06 MBOX spool code: Add real "From " MBOX separator line
83 so the .eml file is really in mbox format (even though
84 most programs do not really care). Patch from Alex Miller.
86TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
87 The latter is generated from $received_to and is only set if the
88 message has one envelope recipient. SA can use these headers,
89 obviously out-of-the-box. Patch from Alex Miller.
91PH/08 The ${def test on a variable was returning false if the variable's
92 value was "0", contrary to what the specification has always said!
93 The result should be true unless the variable is empty.
95PH/09 The syntax error of a character other than { following "${if
96 def:variable_name" (after optional whitespace) was not being diagnosed.
97 An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
98 accidental colon was present, for example, could give incorrect results.
100PH/10 Tidied the code in a number of places where the st_size field of a stat()
101 result is used (not including appendfile, where other changes are about
102 to be made).
104PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
105 This involved changing a lot of size variables from int to off_t. It
106 should work with maildirs and everything.
108TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
109 spamd dying while we are connected to it.
111TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
112 <jgh@wizmail.org>
114PH/12 Applied Alex Kiernan's patch for the API change for the error callback
115 function for BDB 4.3.
117PH/13 Changed auto_thaw such that it does not apply to bounce messages.
119PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
120 the sources for PCRE have been re-arranged and more files are now
121 involved.
123PH/15 The code I had for printing potentially long long variables in PH/11
124 above was not the best (it lost precision). The length of off_t variables
125 is now inspected at build time, and an appropriate printing format (%ld
126 or %lld) is chosen and #defined by OFF_T_FMT. We also define ASSUME_
127 LONG_LONG_SUPPORT if the length is greater than 4. This is needed for the
128 internal formatting function string_vformat().
130PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
131 the configuration file to be ":syslog", then the script "guesses" where
132 the logs files are, rather than using the compiled in default. In our
133 case the guess is not the same as the compiled default, so the script
134 suddenly stopped working when I started to use syslog. The patch checks
135 to see if log_file_path is "". If so, it attempts to read it from exim
136 with no configuration file to get the compiled in version, before it
137 falls back to the previous guessing code."
139TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
140 implementing BATV in an Exim configuration. See NewStuff for the gory
141 details.
143PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
144 Makefile that are specific to HP-UX.
146PH/18 If the "use_postmaster" option was set for a recipient callout together
147 with the "random" option, the postmaster address was used as the MAIL
148 FROM address for the random test, but not for the subsequent recipient
149 test. It is now used for both.
151PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
152 patch removes a few documentation additions to RFC 3028, because the
153 latest draft now contains them. It adds the new en;ascii-case comparator
154 and a new error check for 8bit text in MIME parts. Comparator and
155 require names are now matched exactly. I enabled the subaddress
156 extension, but it is not well tested yet (read: it works for me)."
e5a9dba6 158
159Exim version 4.51
162TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
163 doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
2f079f46 165TK/02 Fix ACL "control" statement not being available in MIME ACL.
167TK/03 Fix ACL "regex" condition not being available in MIME ACL.
169PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
170 to test Sieve filters that use "vacation".
172PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
173 that changes the way the GnuTLS parameters are stored in the cache file.
174 The new format can be generated externally. For backward compatibility,
175 if the data in the cache doesn't make sense, Exim assumes it has read an
176 old-format file, and it generates new data and writes a new file. This
177 means that you can't go back to an older release without removing the
178 file.
180PH/03 A redirect router that has both "unseen" and "one_time" set does not
181 work if there are any delivery delays because "one_time" forces the
182 parent to be marked "delivered", so its unseen clone is never tried
183 again. For this reason, Exim now forbids the simultaneous setting of
184 these two options.
186PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
187 redirected to themselves ("homonym" addresses). Read the long ChangeLog
188 entry if you want to know the details. The fix, however, neglected to
189 consider the case when local delivery batching is involved. The test for
190 "previously delivered" was not happening when checking to see if an
191 address could be batched with a previous (undelivered) one; under
192 certain circumstances this could lead to multiple deliveries to the same
c2c19e9d 193 address.
195PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
196 in its include files, and this causes problems building Exim.
198PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
199 header_syntax) but Exim was just ignoring anything given after a slash.
200 In particular, this caused confusion with an attempt to use "verify =
201 reverse_host_lookup/defer_ok". An error is now given when options are
202 supplied for verify items that do not have them. (Maybe reverse_host_
203 lookup should have a defer_ok option, but that's a different point.)
205PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
206 defined by RFC 821) to 2048, because there were problems with some AUTH
207 commands, and RFC 1869 says the size should be increased for extended
208 SMTP commands that take arguments.
210PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
211 Finch).
213PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
214 "unknown" error; now it says that the functionality isn't in the binary.
8d67ada3 215
216PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
217 an address' error message when a string expansion fails (syntax or
218 whatever). Otherwise the password may appear in the log. Following change
219 PH/42 below, there is no longer a chance of it appearing in a bounce
220 message.
49c2d5ea 221
222PH/11 Installed exipick version 20050225.0 from John Jetmore.
224PH/12 If the last host in a fallback_hosts list was multihomed, only the first
225 of its addresses was ever tried. (Bugzilla bug #2.)
227PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
228 the result incorrectly in the debug output. (It correctly added a newline
229 to what was transported.)
231TF/01 Added $received_time.
233PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
234 commented out examples of how to interface to a virus scanner and to
235 SpamAssassin. Also added commented examples of av_scanner and
236 spamd_address settings.
238PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
239 and controls are allowed in which ACLs. There were a couple of minor
240 errors. Some of the entries in the conditions table (which is a table of
241 where they are NOT allowed) were getting very unwieldy; rewrote them as a
242 negation of where the condition IS allowed.
244PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
246PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
247 header file does not have a version number, so I've had to invent a new
248 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
249 API. The code is untested by me (my Linux distribution still has 0.3.2 of
250 radiusclient), but it was contributed by a Radius user.
252PH/18 Installed Lars Mainka's patch for the support of CRL collections in
253 files or directories, for OpenSSL.
255PH/19 When an Exim process that is running as root has to create an Exim log
256 file, it does so in a subprocess that runs as exim:exim so as to get the
257 ownership right at creation (otherwise, other Exim processes might see
258 the file with the wrong ownership). There was no test for failure of this
259 fork() call, which would lead to the process getting stuck as it waited
260 for a non-existent subprocess. Forks do occasionally fail when resources
261 run out. I reviewed all the other calls to fork(); they all seem to check
262 for failure.
264PH/20 When checking for unexpected SMTP input at connect time (before writing
265 the banner), Exim was not dealing correctly with a non-positive return
266 from the read() function. If the client had disconnected by this time,
267 the result was a log entry for a synchronization error with an empty
268 string after "input=" when read() returned zero. If read() returned -1
269 (an event I could not check), uninitialized data bytes were printed.
270 There were reports of junk text (parts of files, etc) appearing after
271 "input=".
273PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
275PH/22 Added support for macro redefinition, and (re)definition in between
276 driver and ACL definitions.
278PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
279 forgetting to use the resulting value; it was using the unexpanded value.
281PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
282 hadn't been configured. The fix is from Juergen Kreileder, who
283 understands it better than I do:
285 "Here's what I see happening with three configured cyrus_sasl
286 authenticators configured (plain, login, cram-md5):
288 On startup auth_cyrus_sasl_init() gets called for each of these.
289 This means three calls to sasl_listmech() without a specified mech_list.
290 => SASL tests which mechs of all available mechs actually work
291 => three warnings about OTP not working
292 => the returned list contains: plain, login, cram-md5, digest-md5, ...
294 With the patch, sasl_listmech() also gets called three times. But now
295 SASL's mech_list option is set to the server_mech specified in the the
296 authenticator. Or in other words, the answer from sasl_listmech()
297 gets limited to just the mech you're testing for (which is different
298 for each call.)
299 => the return list contains just 'plain' or 'login', 'cram-md5' or
300 nothing depending on the value of ob->server_mech.
302 I've just tested the patch: Authentication still works fine,
303 unavailable mechs specified in the exim configuration are still
304 caught, and the auth.log warnings about OTP are gone."
306PH/25 When debugging is enabled, the contents of the command line are added
307 to the debugging output, even when log_selector=+arguments is not
308 specified.
310PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
311 answer is "GNU", and only if the return is "GNU/something" is the answer
312 "Linux".
314PH/27 $acl_verify_message is now set immediately after the failure of a
315 verification in an ACL, and so is available in subsequent modifiers. In
316 particular, the message can be preserved by coding like this:
318 warn !verify = sender
319 set acl_m0 = $acl_verify_message
321 Previously, $acl_verify_message was set only while expanding "message"
322 and "log_message" when a very denied access.
324PH/28 Modified OS/os.c-Linux with
326 -#ifndef OS_LOAD_AVERAGE
327 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
329 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
330 nomenclature these days.)
332PH/29 Installed patch from the Sieve maintainer that adds the options
333 sieve_useraddress and sieve_subaddress to the redirect router.
335PH/30 In these circumstances:
336 . Two addresses routed to the same list of hosts;
337 . First host does not offer TLS;
338 . First host accepts first address;
339 . First host gives temporary error to second address;
340 . Second host offers TLS and a TLS session is established;
341 . Second host accepts second address.
342 Exim incorrectly logged both deliveries with the TLS parameters (cipher
343 and peerdn, if requested) that were in fact used only for the second
344 address.
7e8bec7a 345
346PH/31 When doing a callout as part of verifying an address, Exim was not paying
347 attention to any local part prefix or suffix that was matched by the
348 router that accepted the address. It now behaves in the same way as it
349 does for delivery: the affixes are removed from the local part unless
350 rcpt_include_affixes is set on the transport.
352PH/32 Add the sender address, as F=<...>, to the log line when logging a
353 timeout during the DATA phase of an incoming message.
355PH/33 Sieve envelope tests were broken for match types other than :is. I have
356 applied a patch sanctioned by the Sieve maintainer.
c688b954 357
358PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
359 the uid or gid is negative. A case of a negative gid caused this to be
360 noticed. The fix allows for either to be negative.
362PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
363 clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
364 overlooked.
366PH/36 The change PH/12 above was broken. Fixed it.
368PH/37 Exim used to check for duplicate addresses in the middle of routing, on
369 the grounds that routing the same address twice would always produce the
370 same answer. This might have been true once, but it is certainly no
371 longer true now. Routing a child address may depend on the previous
372 routing that produced that child. Some complicated redirection strategies
373 went wrong when messages had multiple recipients, and made Exim's
374 behaviour dependent on the order in which the addresses were given.
376 I have moved the duplicate checking until after the routing is complete.
377 Exim scans the addresses that are assigned to local and remote
378 transports, and removes any duplicates. This means that more work will be
379 done, as duplicates will always all be routed, but duplicates are
380 presumably rare, so I don't expect this is of any significance.
382 For deliveries to pipes, files, and autoreplies, the duplicate checking
383 still happens during the routing process, since they are not going to be
384 routed further.
386PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
387 It corrects a timeout issue with spamd. This is Ian's comment: "The
388 background is that sometimes spamd either never reads data from a
389 connection it has accepted, or it never writes response data. The exiscan
390 spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
391 blindly assumes that writes won't block so it may never time out."
393PH/39 Allow G after quota size as well as K and M.
395PH/40 The value set for $authenticated_id in an authenticator may not contain
396 binary zeroes or newlines because the value is written to log lines and
397 to spool files. There was no check on this. Now the value is run through
398 the string_printing() function so that such characters are converted to
399 printable escape sequences.
401PH/41 $message_linecount is a new variable that contains the total number of
402 lines in the message. Compare $body_linecount, which is the count for the
403 body only.
405PH/42 Exim no longer gives details of delivery errors for specific addresses in
406 bounce and delay warning messages, except in certain special cases, which
407 are as follows:
409 (a) An SMTP error message from a remote host;
410 (b) A message specified in a :fail: redirection;
411 (c) A message specified in a "fail" command in a system filter;
412 (d) A message specified in a FAIL return from the queryprogram router;
413 (e) A message specified by the cannot_route_message router option.
415 In these cases only, Exim does include the error details in bounce and
416 warning messages. There are also a few cases where bland messages such
417 as "unrouteable address" or "local delivery error" are given.
419PH/43 $value is now also set for the "else" part of a ${run expansion.
421PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
422 being worked on, but at least Exim now implements the latest version to
423 play with."
425PH/45 In a pipe transport, although a timeout while waiting for the pipe
426 process to complete was treated as a delivery failure, a timeout while
427 writing the message to the pipe was logged, but erroneously treated as a
428 successful delivery. Such timeouts include transport filter timeouts. For
429 consistency with the overall process timeout, these timeouts are now
430 treated as errors, giving rise to delivery failures by default. However,
431 there is now a new Boolean option for the pipe transport called
432 timeout_defer, which, if set TRUE, converts the failures into defers for
433 both kinds of timeout. A transport filter timeout is now identified in
434 the log output.
436PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
437 systems where "make" and "gmake" are different, calling "gmake" at top
438 level broke things. I've arranged for the value of $(MAKE) to be passed
439 from the Makefile to this script so that it can call the same version of
440 "make".
7982096b 442
443A note about Exim versions 4.44 and 4.50
446Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
447changes of various kinds. As a consequence, a big documentation update was
448needed. This delayed the release for rather longer than seemed good, especially
449in the light of a couple of (minor) security issues. Therefore, the changes
450that fixed bugs were backported into 4.43, to create a 4.44 maintenance
451release. So 4.44 and 4.50 are in effect two different branches that both start
452from 4.43.
454I have left the 4.50 change log unchanged; it contains all the changes since
4554.43. The change log for 4.44 is below; many of its items are identical to
456those for 4.50. This seems to be the most sensible way to preserve the
457historical information.
f7b63901 460Exim version 4.50
463 1. Minor wording change to the doc/README.SIEVE file.
139059f6 465 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
5fe762f6 466 computation of the current number of files was incorrect.
495ae4b0 467
468 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
469 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
470 place.
472 4. Give more explanation in the error message when the command for a transport
473 filter fails to execute.
475 5. There are several places where Exim runs a non-Exim command in a
476 subprocess. The SIGUSR1 signal should be disabled for these processes. This
477 was being done only for the command run by the queryprogram router. It is
478 now done for all such subprocesses. The other cases are: ${run, transport
479 filters, and the commands run by the lmtp and pipe transports.
481 6. Added CONFIGURE_GROUP build-time option.
483 7. Some older OS have a limit of 256 on the maximum number of file
484 descriptors. Exim was using setrlimit() to set 1000 as a large value
485 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
486 systems. I've change it so that if it can't get 1000, it tries for 256.
35edf2ff 487
488 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
489 was an oversight, and furthermore, ever since the addition of extra
490 controls (e.g. 4.43/32), the checks on when to allow different forms of
491 "control" were broken. There should now be diagnostics for all cases when a
492 control that does not make sense is encountered.
494 9. Added the /retain_sender option to "control=submission".
49610. $recipients is now available in the predata ACL (oversight).
49811. Tidy the search cache before the fork to do a delivery from a message
499 received from the command line. Otherwise the child will trigger a lookup
500 failure and thereby defer the delivery if it tries to use (for example) a
501 cached ldap connection that the parent has called unbind on.
50312. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
504 of $address_data from the recipient verification was clobbered by the
505 sender verification.
50713. The value of address_data from a sender verification is now available in
508 $sender_address_data in subsequent conditions in the ACL statement.
51014. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
51215. Added a new option "connect=<time>" to callout options, to set a different
513 connection timeout.
51516. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
516 was its contents. (It was OK if the option was not defined at all.)
51817. A "Completed" log line is now written for messages that are removed from
519 the spool by the -Mrm option.
52118. New variables $sender_verify_failure and $recipient_verify_failure contain
522 information about exactly what failed.
52419. Added -dd to debug only the daemon process.
52620. Incorporated Michael Haardt's patch to ldap.c for improving the way it
527 handles timeouts, both on the server side and network timeouts. Renamed the
528 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
53021. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
531 It is now set to "smtps".
53322. $host_address is now set to the target address during the checking of
534 ignore_target_hosts.
53623. When checking ignore_target_hosts for an ipliteral router, no host name was
537 being passed; this would have caused $sender_host_name to have been used if
538 matching the list had actually called for a host name (not very likely,
539 since this list is usually IP addresses). A host name is now passed as
540 "[x.x.x.x]".
54224. Changed the calls that set up the SIGCHLD handler in the daemon to use the
543 code that specifies a non-restarting handler (typically sigaction() in
544 modern systems) in an attempt to fix a rare and obscure crash bug.
54625. Narrowed the window for a race in the daemon that could cause it to ignore
547 SIGCHLD signals. This is not a major problem, because they are used only to
548 wake it up if nothing else does.
55026. A malformed maildirsize file could cause Exim to calculate negative values
551 for the mailbox size or file count. Odd effects could occur as a result.
552 The maildirsize information is now recalculated if the size or filecount
553 end up negative.
55527. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
556 support for a long time. Removed HAVE_SYS_VFS_H.
55828. Installed the latest version of exipick from John Jetmore.
56029. In an address list, if the pattern was not a regular expression, an empty
561 subject address (from a bounce message) matched only if the pattern was an
562 empty string. Non-empty patterns were not even tested. This was the wrong
563 because it is perfectly reasonable to use an empty address as part of a
564 database query. An empty address is now tested by patterns that are
565 lookups. However, all the other forms of pattern expect the subject to
566 contain a local part and a domain, and therefore, for them, an empty
567 address still always fails if the pattern is not itself empty.
56930. Exim went into a mad DNS loop when attempting to do a callout where the
570 host was specified on an smtp transport, and looking it up yielded more
571 than one IP address.
57331. Re-factored the code for checking spool and log partition space into a
574 function that finds that data and another that does the check. The former
575 is then used to implement four new variables: $spool_space, $log_space,
576 $spool_inodes, and $log_inodes.
57832. The RFC2047 encoding function was originally intended for short strings
579 such as real names; it was not keeping to the 75-character limit for
580 encoded words that the RFC imposes. It now respects the limit, and
581 generates multiple encoded words if necessary. To be on the safe side, I
582 have increased the buffer size for the ${rfc2047: expansion operator from
583 1024 to 2048 bytes.
58533. It is now permitted to omit both strings after an "if" condition; if the
586 condition is true, the result is "true". As before, when the second string
587 is omitted, a false condition yields an empty string. This makes it less
588 cumbersome to write custom ACL and router conditions.
59034. Failure to deliver a bounce message always caused it to be frozen, even if
591 there was an errors_to setting on the router. The errors_to setting is now
592 respected.
59435. If an IPv6 address is given for -bh or -bhc, it is now converted to the
595 canonical form (fully expanded) before being placed in
596 $sender_host_address.
59836. The table in the code that translates DNS record types into text (T_A to
599 "A" for instance) was missing entries for NS and CNAME. It is just possible
600 that this could have caused confusion if both these types were looked up
601 for the same domain, because the text type is used as part of Exim's
602 per-process caching. But the chance of anyone hitting this buglet seems
603 very small.
60537. The dnsdb lookup has been extended in a number of ways.
607 (1) There is a new type, "zns", which walks up the domain tree until it
608 finds some nameserver records. It should be used with care.
610 (2) There is a new type, "mxh", which is like "mx" except that it returns
611 just the host names, not the priorities.
613 (3) It is now possible to give a list of domains (or IP addresses) to be
614 looked up. The behaviour when one of the lookups defers can be
615 controlled by a keyword.
7bb56e1f 616
ea3bc19b 617 (4) It is now possible to specify the separator character for use when
7bb56e1f 618 multiple records are returned.
33397d19 619
62038. The dnslists ACL condition has been extended: it is now possible to supply
621 a list of IP addresses and/or domains to be looked up in a particular DNS
622 domain.
62439. Added log_selector=+queue_time_overall.
62640. When running the queue in the test harness, wait just a tad after forking a
627 delivery process, to get repeatability of debugging output.
62941. Include certificate and key file names in error message when GnuTLS fails
630 to set them up, because the GnuTLS error message doesn't include the name
631 of the failing file when there is a problem reading it.
63342. Allow both -bf and -bF in the same test run.
63543. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
63744. The "Exiscan patch" is now merged into the mainline Exim source.
63945. Sometimes the final signoff response after QUIT could fail to get
640 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
641 < 0 before doing a fflush(). This bug looks as though it goes back to the
642 introduction of TLS in release 3.20, but "sometimes" must have been rare
643 because the tests only now provoked it.
64546. Reset the locale to "C" after calling embedded Perl, in case it was changed
646 (this can affect the format of dates).
64847. exim_tidydb, when checking for the continued existence of a message for
649 which it has found a message-specific retry record, was not finding
650 messages that were in split spool directories. Consequently, it was
651 deleting retry records that should have stayed in existence.
65348. Steve fixed some bugs in eximstats.
65549. The SPA authentication driver was not abandoning authentication and moving
656 on to the next authenticator when an expansion was forced to fail,
657 contradicting the general specification for all authenticators. Instead it
658 was generating a temporary error. It now behaves as specified.
66050. The default ordering of permitted cipher suites for GnuTLS was pessimal
661 (the order specifies the preference for clients). The order is now AES256,
662 AES128, 3DES, ARCFOUR128.
66451. Small patch to Sieve code - explicitly set From: when generating an
665 autoreply.
66752. Exim crashed if a remote delivery caused a very long error message to be
668 recorded - for instance if somebody sent an entire SpamAssassin report back
669 as a large number of 550 error lines. This bug was coincidentally fixed by
670 increasing the size of one of Exim's internal buffers (big_buffer) that
671 happened as part of the Exiscan merge. However, to be on the safe side, I
672 have made the code more robust (and fixed the comments that describe what
673 is going on).
67553. Now that there can be additional text after "Completed" in log lines (if
676 the queue_time_overall log selector is set), a one-byte patch to exigrep
677 was needed to allow it to recognize "Completed" as not the last thing in
678 the line.
68054. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
681 patch that reportedly fixes this has been added. I am not expert enough to
682 create a test for it. This is what the patch creator wrote:
684 "I found a little strange behaviour of ldap code when working with
685 Windows 2003 AD Domain, where users was placed in more than one
686 Organization Units. When I tried to give exim partial DN, the exit code
687 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
688 But simultaneously result of request was absolutely normal ldap result,
689 so I produce this patch..."
691 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
692 REFERENCE, so I have modified the code to exclude the patch when that macro
693 is not defined.
69555. Some experimental protocols are using DNS PTR records for new purposes. The
696 keys for these records are domain names, not reversed IP addresses. The
697 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
698 leaves it alone. Component reversal etc. now happens only for IP addresses.
ea3a6f44 699 CAN-2005-0021
7102e136 700
70156. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
70357. Double the size of the debug message buffer (to 2048) so that more of very
704 long debug lines gets shown.
70658. The exicyclog utility now does better if the number of log files to keep
707 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
70959. Two changes related to the smtp_active_hostname option:
711 (1) $smtp_active_hostname is now available as a variable.
712 (2) The default for smtp_banner uses $smtp_active_hostname instead
713 of $primary_hostname.
71560. The host_aton() function is supposed to be passed a string that is known
716 to be a valid IP address. However, in the case of IPv6 addresses, it was
717 not checking this. This is a hostage to fortune. Exim now panics and dies
718 if the condition is not met. A case was found where this could be provoked
719 from a dnsdb PTR lookup with an IPv6 address that had more than 8
720 components; fortuitously, this particular loophole had already been fixed
721 by change 4.50/55 above.
723 If there are any other similar loopholes, the new check in host_aton()
724 itself should stop them being exploited. The report I received stated that
725 data on the command line could provoke the exploit when Exim was running as
726 exim, but did not say which command line option was involved. All I could
727 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
728 running as the user.
ea3a6f44 729 CAN-2005-0021
73161. There was a buffer overflow vulnerability in the SPA authentication code
732 (which came originally from the Samba project). I have added a test to the
733 spa_base64_to_bits() function which I hope fixes it.
ea3a6f44 734 CAN-2005-0022
b975ba52 735
73662. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
737 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
73963. The daemon start-up calls getloadavg() while still root for those OS that
740 need the first call to be done as root, but it missed one case: when
741 deliver_queue_load_max is set with deliver_drop_privilege. This is
742 necessary for the benefit of the queue runner, because there is no re-exec
743 when deliver_drop_privilege is set.
74564. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
746 This has been fixed.
74865. Caching of lookup data for "hosts =" ACL conditions, when a named host list
749 was in use, was not putting the data itself into the right store pool;
750 consequently, it could be overwritten for a subsequent message in the same
751 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
752 the caching.)
75466. Added hosts_max_try_hardlimit to the smtp transport, default 50.
75667. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
757 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
758 the function were treating the return as a boolean value, which happened to
759 work because 0=false and not-0=true, but is not correct code.
76168. The host_aton() function was not handling scoped IPv6 addresses (those
762 with, for example, "%eth0" on the end) correctly.
76469. Fixed some compiler warnings in acl.c for the bitmaps specified with
765 negated items (that is, ~something) in unsigned ints. Some compilers
766 apparently mutter when there is no cast.
76870. If an address verification called from an ACL failed, and did not produce a
769 user-specific message (i.e. there was only a "system" message), nothing was
770 put in $acl_verify_message. In this situation, it now puts the system
771 message there.
77371. Change 4.23/11 added synchronization checking at the start of an SMTP
774 session; change 4.31/43 added the unwanted input to the log line - except
775 that it did not do this in the start of session case. It now does.
77772. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
778 This is wrong and can cause the other end to generate a synchronization
779 error if it is another Exim or anything else that does the synchronization
780 check. A QUIT command is no longer sent after a timeout.
78273. $host_lookup_deferred has been added, to make it easier to detect DEFERs
783 during host lookups.
78574. The defer_ok option of callout verification was not working if it was used
786 when verifying addresses in header lines, that is, for this case:
788 verify = header_sender/callout=defer_ok
79075. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
791 those file descriptors could be used for SMTP connections. If anything
792 wrote to stderr (the example that came up was "warn" in embedded Perl), it
793 could be sent to the SMTP client, causing chaos. The daemon now opens
794 stdin, stdout, and stderr to /dev/null when it puts itself into the
795 background.
79776. Arrange for output from Perl's "warn" command to be written to Exim's main
798 log by default. The user can override this with suitable Perl magic.
80077. The use of log_message on a "discard" ACL verb, which is supposed to add to
801 the log message when discard triggers, was not working for the DATA ACL or
802 for the non-SMTP ACL.
80478. Error message wording change in sieve.c.
80679. If smtp_accept_max_per_host was set, the number of connections could be
807 restricted to fewer than expected, because the daemon was trying to set up
808 a new connection before checking whether the processes handling previous
809 connections had finished. The check for completed processes is now done
810 earlier. On busy systems, this bug wouldn't be noticed because something
811 else would have woken the daemon, and it would have reaped the completed
812 process earlier.
81480. If a message was submitted locally by a user whose login name contained one
815 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
816 It caused a spool format error. I have fixed the spool reading code. A
817 related problem was that the "from" clause in the Received: line became
818 illegal because of the space(s). It is now covered by ${quote_local_part.
82081. Included the latest eximstats from Steve (adds average sizes to HTML Top
821 tables).
82382. Updated OS/Makefile-AIX as per message from Mike Meredith.
82583. Patch from Sieve maintainer to fix unterminated string problem in
826 "vacation" handling.
82884. Some minor changes to the Linux configuration files to help with other
829 OS variants using glibc.
83185. One more patch for Sieve to update vacation handling to latest spec.
495ae4b0 833
835See the note above about the 4.44 and 4.50 releases.
839Exim version 4.44
842 1. Change 4.43/35 introduced a bug that caused file counts to be
843 incorrectly computed when quota_filecount was set in an appendfile
844 transport
846 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
847 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
848 place.
850 3. Give more explanation in the error message when the command for a transport
851 filter fails to execute.
853 4. There are several places where Exim runs a non-Exim command in a
854 subprocess. The SIGUSR1 signal should be disabled for these processes. This
855 was being done only for the command run by the queryprogram router. It is
856 now done for all such subprocesses. The other cases are: ${run, transport
857 filters, and the commands run by the lmtp and pipe transports.
859 5. Some older OS have a limit of 256 on the maximum number of file
860 descriptors. Exim was using setrlimit() to set 1000 as a large value
861 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
862 systems. I've change it so that if it can't get 1000, it tries for 256.
864 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
865 was an oversight, and furthermore, ever since the addition of extra
866 controls (e.g. 4.43/32), the checks on when to allow different forms of
867 "control" were broken. There should now be diagnostics for all cases when a
868 control that does not make sense is encountered.
870 7. $recipients is now available in the predata ACL (oversight).
872 8. Tidy the search cache before the fork to do a delivery from a message
873 received from the command line. Otherwise the child will trigger a lookup
874 failure and thereby defer the delivery if it tries to use (for example) a
875 cached ldap connection that the parent has called unbind on.
877 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
878 of $address_data from the recipient verification was clobbered by the
879 sender verification.
88110. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
882 was its contents. (It was OK if the option was not defined at all.)
88411. A "Completed" log line is now written for messages that are removed from
885 the spool by the -Mrm option.
88712. $host_address is now set to the target address during the checking of
888 ignore_target_hosts.
89013. When checking ignore_target_hosts for an ipliteral router, no host name was
891 being passed; this would have caused $sender_host_name to have been used if
892 matching the list had actually called for a host name (not very likely,
893 since this list is usually IP addresses). A host name is now passed as
894 "[x.x.x.x]".
89614. Changed the calls that set up the SIGCHLD handler in the daemon to use the
897 code that specifies a non-restarting handler (typically sigaction() in
898 modern systems) in an attempt to fix a rare and obscure crash bug.
90015. Narrowed the window for a race in the daemon that could cause it to ignore
901 SIGCHLD signals. This is not a major problem, because they are used only to
902 wake it up if nothing else does.
90416. A malformed maildirsize file could cause Exim to calculate negative values
905 for the mailbox size or file count. Odd effects could occur as a result.
906 The maildirsize information is now recalculated if the size or filecount
907 end up negative.
90917. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
910 support for a long time. Removed HAVE_SYS_VFS_H.
ea3a6f44 91218. Updated exipick to current release from John Jetmore.
91419. Allow an empty sender to be matched against a lookup in an address list.
915 Previously the only cases considered were a regular expression, or an
916 empty pattern.
91820. Exim went into a mad DNS lookup loop when doing a callout where the
919 host was specified on the transport, if the DNS lookup yielded more than
920 one IP address.
92221. The RFC2047 encoding function was originally intended for short strings
923 such as real names; it was not keeping to the 75-character limit for
924 encoded words that the RFC imposes. It now respects the limit, and
925 generates multiple encoded words if necessary. To be on the safe side, I
926 have increased the buffer size for the ${rfc2047: expansion operator from
927 1024 to 2048 bytes.
bbe902f0 928
92922. Failure to deliver a bounce message always caused it to be frozen, even if
930 there was an errors_to setting on the router. The errors_to setting is now
931 respected.
93323. If an IPv6 address is given for -bh or -bhc, it is now converted to the
934 canonical form (fully expanded) before being placed in
935 $sender_host_address.
93724. Updated eximstats to version 1.33
93925. Include certificate and key file names in error message when GnuTLS fails
940 to set them up, because the GnuTLS error message doesn't include the name
941 of the failing file when there is a problem reading it.
94326. Expand error message when OpenSSL has problems setting up cert/key files.
ea3a6f44 944 As per change 25.
bbe902f0 945
94627. Reset the locale to "C" after calling embedded Perl, in case it was changed
947 (this can affect the format of dates).
bbe902f0 948
94928. exim_tidydb, when checking for the continued existence of a message for
950 which it has found a message-specific retry record, was not finding
951 messages that were in split spool directories. Consequently, it was
952 deleting retry records that should have stayed in existence.
95429. eximstats updated to version 1.35
955 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
956 1.35 - bugfix such that pie charts by volume are generated correctly
95830. The SPA authentication driver was not abandoning authentication and moving
959 on to the next authenticator when an expansion was forced to fail,
960 contradicting the general specification for all authenticators. Instead it
961 was generating a temporary error. It now behaves as specified.
bbe902f0 962
96331. The default ordering of permitted cipher suites for GnuTLS was pessimal
964 (the order specifies the preference for clients). The order is now AES256,
965 AES128, 3DES, ARCFOUR128.
bbe902f0 966
96731. Small patch to Sieve code - explicitly set From: when generating an
968 autoreply.
bbe902f0 969
97032. Exim crashed if a remote delivery caused a very long error message to be
971 recorded - for instance if somebody sent an entire SpamAssassin report back
972 as a large number of 550 error lines. This bug was coincidentally fixed by
973 increasing the size of one of Exim's internal buffers (big_buffer) that
974 happened as part of the Exiscan merge. However, to be on the safe side, I
975 have made the code more robust (and fixed the comments that describe what
976 is going on).
bbe902f0 977
97833. Some experimental protocols are using DNS PTR records for new purposes. The
979 keys for these records are domain names, not reversed IP addresses. The
980 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
981 leaves it alone. Component reversal etc. now happens only for IP addresses.
982 CAN-2005-0021
98434. The host_aton() function is supposed to be passed a string that is known
985 to be a valid IP address. However, in the case of IPv6 addresses, it was
986 not checking this. This is a hostage to fortune. Exim now panics and dies
987 if the condition is not met. A case was found where this could be provoked
988 from a dnsdb PTR lookup with an IPv6 address that had more than 8
989 components; fortuitously, this particular loophole had already been fixed
990 by change 4.50/55 or 4.44/33 above.
992 If there are any other similar loopholes, the new check in host_aton()
993 itself should stop them being exploited. The report I received stated that
994 data on the command line could provoke the exploit when Exim was running as
995 exim, but did not say which command line option was involved. All I could
996 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
997 running as the user.
998 CAN-2005-0021
100035. There was a buffer overflow vulnerability in the SPA authentication code
1001 (which came originally from the Samba project). I have added a test to the
1002 spa_base64_to_bits() function which I hope fixes it.
1003 CAN-2005-0022
100536. The daemon start-up calls getloadavg() while still root for those OS that
1006 need the first call to be done as root, but it missed one case: when
1007 deliver_queue_load_max is set with deliver_drop_privilege. This is
1008 necessary for the benefit of the queue runner, because there is no re-exec
1009 when deliver_drop_privilege is set.
bbe902f0 1010
101137. Caching of lookup data for "hosts =" ACL conditions, when a named host list
1012 was in use, was not putting the data itself into the right store pool;
1013 consequently, it could be overwritten for a subsequent message in the same
1014 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
1015 the caching.)
bbe902f0 1016
101738. Sometimes the final signoff response after QUIT could fail to get
1018 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
1019 < 0 before doing a fflush(). This bug looks as though it goes back to the
1020 introduction of TLS in release 3.20, but "sometimes" must have been rare
1021 because the tests only now provoked it.
1024Exim version 4.43
1027 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
1028 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
1029 Now it returns an integer. A number of calls were still expecting a T/F
1030 return. Fortuitously, in all cases, the tests worked in OK situations,
1031 which is the norm. However, things would have gone wrong on any write
1032 failures on the smtp file descriptor. This function is used when sending
1033 messages over SMTP and also when doing verify callouts.
1035 2. When Exim is called to do synchronous delivery of a locally submitted
1036 message (the -odf or -odi options), it no longer closes stderr before doing
1037 the delivery.
1039 3. Implemented the mua_wrapper option.
1041 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
1043 5. Implemented the functions header_remove(), header_testname(),
1044 header_add_at_position(), and receive_remove_recipient(), and exported them
1045 to local_scan().
1047 6. If an ACL "warn" statement specified the addition of headers, Exim already
1048 inserted X-ACL-Warn: at the start if there was no header name. However, it
1049 was not making this test for the second and subsequent header lines if
1050 there were newlines in the string. This meant that an invalid header could
1051 be inserted if Exim was badly configured.
1053 7. Allow an ACL "warn" statement to add header lines at the start or after all
1054 the Received: headers, as well as at the end.
1056 8. Added the rcpt_4xx retry error code.
1058 9. Added postmaster_mailfrom=xxx to callout verification option.
106010. Added mailfrom=xxxx to the callout verification option, for verify=
1061 header_sender only.
106311. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
1064 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
106612. Inserted some casts to stop certain compilers warning when using pointer
1067 differences as field lengths or precisions in printf-type calls (mostly
1068 affecting debugging statements).
107013. Added optional readline() support for -be (dynamically loaded).
107214. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
1073 same clock tick as a message's arrival, so that its received time was the
1074 same as the "first fail" time on the retry record, and that message
1075 remained on the queue past the ultimate address timeout, every queue runner
1076 would try a delivery (because it was past the ultimate address timeout) but
1077 after another failure, the ultimate address timeout, which should have then
1078 bounced the address, did not kick in. This was a "< instead of <=" error;
1079 in most cases the first failure would have been in the next clock tick
1080 after the received time, and all would be well.
108215. The special items beginning with @ in domain lists (e.g. @mx_any) were not
1083 being recognized when the domain list was tested by the match_domain
1084 condition in an expansion string.
108616. Added the ${str2b64: operator.
108817. Exim was always calling setrlimit() to set a large limit for the number of
1089 processes, without checking whether the existing limit was already
1090 adequate. (It did check for the limit on file descriptors.) Furthermore,
1091 errors from getrlimit() and setrlimit() were being ignored. Now they are
1092 logged to the main and panic logs, but Exim does carry on, to try to do its
1093 job under whatever limits there are.
109518. Imported PCRE 5.0.
109719. Trivial typo in log message " temporarily refused connection" (the leading
1098 space).
110020. If the log selector return_path_on_delivery was set and an address was
1101 redirected to /dev/null, the delivery process crashed because it assumed
1102 that a return path would always be set for a "successful" delivery. In this
1103 case, the whole delivery is bypassed as an optimization, and therefore no
1104 return path is set.
110621. Internal re-arrangement: the function for sending a challenge and reading
1107 a response while authentication was assuming a zero-terminated challenge
1108 string. It's now changed to take a pointer and a length, to allow for
1109 binary data in such strings.
111122. Added the cyrus_sasl authenticator (code supplied by MBM).
111323. Exim was not respecting finduser_retries when seeking the login of the
1114 uid under which it was called; it was always trying 10 times. (The default
1115 setting of finduser_retries is zero.) Also, it was sleeping after the final
1116 failure, which is pointless.
111824. Implemented tls_on_connect_ports.
112025. Implemented acl_smtp_predata.
112226. If the domain in control=submission is set empty, Exim assumes that the
1123 authenticated id is a complete email address when it generates From: or
1124 Sender: header lines.
112627. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
1127 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
1128 chown and chgrp in /bin and hostname in /usr/bin.
113028. Exim was keeping the "process log" file open after each use, just as it
1131 does for the main log. This opens the possibility of it remaining open for
1132 long periods when the USR1 signal hits a daemon. Occasional processlog
1133 errors were reported, that could have been caused by this. Anyway, it seems
1134 much more sensible not to leave this file open at all, so that is what now
1135 happens.
113729. The long-running daemon process does not normally write to the log once it
1138 has entered its main loop, and it closes the log before doing so. This is
1139 so that log files can straightforwardly be renamed and moved. However,
1140 there are a couple of unusual error situations where the daemon does write
1141 log entries, and I had neglected to close the log afterwards.
114330. The text of an SMTP error response that was received during a remote
1144 delivery was being truncated at 512 bytes. This is too short for some of
1145 the long messages that one sometimes sees. I've increased the limit to
1146 1024.
114831. It is now possible to make retry rules that apply only when a message has a
1149 specific sender, in particular, an empty sender.
115132. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
1152 it possible to be selective about when SMTP synchronization is enforced.
115433. Added "control = caseful_local_part" and "control = "caselower_local_part".
115632. Implemented hosts_connection_nolog.
115833. Added an ACL for QUIT.
116034. Setting "delay_warning=" to disable warnings was not working; it gave a
1161 syntax error.
116335. Added mailbox_size and mailbox_filecount to appendfile.
116536. Added control = no_multiline_responses to ACLs.
116737. There was a bug in the logic of the code that waits for the clock to tick
1168 in the case where the clock went backwards by a substantial amount such
1169 that the microsecond fraction of "now" was more than the microsecond
1170 fraction of "then" (but the whole seconds number was less).
117238. Added support for the libradius Radius client library this is found on
1173 FreeBSD (previously only the radiusclient library was supported).
1176Exim version 4.42
1179 1. When certain lookups returned multiple values in the form name=value, the
1180 quoting of the values was not always being done properly. Specifically:
1181 (a) If the value started with a double quote, but contained no whitespace,
1182 it was not quoted.
1183 (b) If the value contained whitespace other than a space character (i.e.
1184 tabs or newlines or carriage returns) it was not quoted.
1185 This fix has been applied to the mysql and pgsql lookups by writing a
1186 separate quoting function and calling it from the lookup code. The fix
1187 should probably also be applied to nisplus, ibase and oracle lookups, but
1188 since I cannot test any of those, I have not disturbed their existing code.
1190 2. A hit in the callout cache for a specific address caused a log line with no
1191 reason for rejecting RCPT. Now it says "Previous (cached) callout
1192 verification failure".
1194 3. There was an off-by-one bug in the queryprogram router. An over-long
1195 return line was truncated at 256 instead of 255 characters, thereby
1196 overflowing its buffer with the terminating zero. As well as fixing this, I
1197 have increased the buffer size to 1024 (and made a note to document this).
1199 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
1200 when Exim is waiting for an SMTP response from a remote server, Exim
1201 restarts its select() call on the socket, thereby resetting its timeout.
1202 This is not a problem when such interrupts are rare. Somebody set up a cron
1203 job to run exiwhat every 2 minutes, which is less than the normal select()
1204 timeout (5 or 10 minutes). This meant that the select() timeout never
1205 kicked in because it was always reset. I have fixed this by comparing the
1206 time when an interrupt arrives with the time at the start of the first call
1207 to select(). If more time than the timeout has elapsed, the interrupt is
1208 treated as a timeout.
1210 5. Some internal re-factoring in preparation for the addition of Sieve
1211 extensions (by MH). In particular, the "personal" test is moved to a
1212 separate function, and given an option for scanning Cc: and Bcc: (which is
1213 not set for Exim filters).
1215 6. When Exim created an email address using the login of the caller as the
1216 local part (e.g. when creating a From: or Sender: header line), it was not
1217 quoting the local part when it contained special characters such as @.
1219 7. Installed new OpenBSD configuration files.
1221 8. Reworded some messages for syntax errors in "and" and "or" conditions to
1222 try to make them clearer.
1224 9. Callout options, other than the timeout value, were being ignored when
1225 verifying sender addresses in header lines. For example, when using
1227 verify = header_sender/callout=no_cache
1229 the cache was (incorrectly) being used.
123110. Added a missing instance of ${EXE} to the exim_install script; this affects
1232 only the Cygwin environment.
123411. When return_path_on_delivery was set as a log selector, if different remote
1235 addresses in the same message used different return paths and parallel
1236 remote delivery occurred, the wrong values would sometimes be logged.
1237 (Whenever a remote delivery process finished, the return path value from
1238 the most recently started remote delivery process was logged.)
124012. RFC 3848 specifies standard names for the "with" phrase in Received: header
1241 lines when AUTH and/or TLS are in use. This is the "received protocol"
1242 field. Exim used to use "asmtp" for authenticated SMTP, without any
1243 indication (in the protocol name) for TLS use. Now it follows the RFC and
1244 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
1245 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
1246 names appear in log lines as well as in Received: header lines.
124813. Installed MH's patches for Sieve to add the "copy" and "vacation"
1249 extensions, and comparison tests, and to fix some bugs.
125114. Changes to the "personal" filter test:
1253 (1) The test was buggy in that it was just doing the equivalent of
1254 "contains" tests on header lines. For example, if a user's address was
1255 anne@some.where, the "personal" test would incorrectly be true for
1257 To: susanne@some.where
1259 This test is now done by extracting each address from the header in turn,
1260 and checking the entire address. Other tests that are part of "personal"
1261 are now done using regular expressions (for example, to check local parts
1262 of addresses in From: header lines).
1264 (2) The list of non-personal local parts in From: addresses has been
1265 extended to include "listserv", "majordomo", "*-request", and "owner-*",
1266 taken from the Sieve specification recommendations.
1268 (3) If the message contains any header line starting with "List-" it is
1269 treated as non-personal.
1271 (4) The test for "circular" in the Subject: header line has been removed
1272 because it now seems ill-conceived.
127415. Minor typos in src/EDITME comments corrected.
127616. Installed latest exipick from John Jetmore.
127817. If headers_add on a router specified a text string that was too long for
1279 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
1280 of string_sprintf() is now avoided.
128218. $message_body_size was not set (it was always zero) when running the DATA
1283 ACL and the local_scan() function.
128519. For the "mail" command in an Exim filter, no default was being set for
1286 the once_repeat time, causing a random time value to be used if "once" was
1287 specified. (If the value happened to be <= 0, no repeat happened.) The
1288 default is now 0s, meaning "never repeat". The "vacation" command was OK
1289 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
1290 (I found it when inspecting the code).
129220. There is now an overall timeout for performing a callout verification. It
1293 defaults to 4 times the callout timeout, which applies to individual SMTP
1294 commands during the callout. The overall timeout applies when there is more
1295 than one host that can be tried. The timeout is checked before trying the
1296 next host. This prevents very long delays if there are a large number of
1297 hosts and all are timing out (e.g. when the network connections are timing
1298 out). The value of the overall timeout can be changed by specifying an
1299 additional sub-option for "callout", called "maxwait". For example:
1301 verify = sender/callout=5s,maxwait=20s
130321. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
1304 to the end before writing, but this should make it even safer).
130622. Exim was forgetting that it had advertised PIPELINING for the second and
1307 subsequent messages on an SMTP connection. It was also not resetting its
1308 memory on STARTTLS and an internal HELO.
131023. When Exim logs an SMTP synchronization error within a session, it now
1311 records whether PIPELINING has been advertised or not.
131324. Added 3 instances of "(long int)" casts to time_t variables that were being
1314 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
1315 rather than long int.
131725. Installed the latest Cygwin configuration files from the Cygwin maintainer.
131926. Added the never_mail option to autoreply.
1322Exim version 4.41
1325 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
1326 crash if the getsockname() call failed; this can happen if a connection is
1327 closed very soon after it is established. The problem was simply in the
1328 order in which certain operations were done, causing Exim to try to write
1329 to the SMTP stream before it had set up the file descriptor. The bug has
1330 been fixed by making things happen in the correct order.
1333Exim version 4.40
1336 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
1337 before the connection was closed, thus losing the rejection response.
1339 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
1340 some early Solaris releases, but causes trouble in current releases where
1341 socklen_t is defined.
1343 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
1344 always exist.
1346 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
1347 configured.
1349 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
1350 that releasing the top of it at the end releases what was used for sub-
1351 expansions (unless the block got too big). However, discard this block if
1352 the first thing is a variable or header, so that we can use its block when
1353 it is dynamic (useful for very large $message_headers, for example).
1355 6. Lookups now cache *every* query, not just the most recent. A new, separate
1356 store pool is used for this. It can be recovered when all lookup caches are
1357 flushed. Lookups now release memory at the end of their result strings.
1358 This has involved some general refactoring of the lookup sources.
1360 7. Some code has been added to the store_xxx() functions to reduce the amount
1361 of flapping under certain conditions.
1363 8. log_incoming_interface used to affect only the <= reception log lines. Now
1364 it causes the local interface and port to be added to several more SMTP log
1365 lines, for example "SMTP connection from", and rejection lines.
1367 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
136910. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
137111. If $host_data was set by virtue of a hosts lookup in an ACL, its value
1372 could be overwritten at the end of the current message (or the start of a
1373 new message if it was set in a HELO ACL). The value is now preserved for
1374 the duration of the SMTP connection.
137612. If a transport had a headers_rewrite setting, and a matching header line
1377 contained an unqualified address, that address was qualified, even if it
1378 did not match any rewriting rules. The underlying bug was that the values
1379 of the flags that permit the existence of unqualified sender and recipient
1380 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
1381 non-local messages, and by -bnq for local messages) were not being
1382 preserved with the message after it was received.
138413. When Exim was logging an SMTP synchronization error, it could sometimes log
1385 "next input=" as part of the text comprising the host identity instead of
1386 the correct text. The code was using the same buffer for two different
1387 strings. However, depending on which order the printing function evaluated
1388 its arguments, the bug did not always show up. Under Linux, for example, my
1389 test suite worked just fine.
139114. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
1392 doesn't work with some older versions of Perl. It has been changed to "my",
1393 which in any case is probably the better facility to use.
139515. A really picky compiler found some instances of statements for creating
1396 error messages that either had too many or two few arguments for the format
1397 string.
139916. The size of the buffer for calls to the DNS resolver has been increased
1400 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
1401 for addresses that have a lot of PTR records. This alleviates a problem; it
1402 does not fully solve it.
140417. A dnsdb lookup for PTR records that receives more data than will fit in the
1405 buffer now truncates the list and logs the incident, which is the same
1406 action as happens when Exim is looking up a host name and its aliases.
1407 Previously in this situation something unpredictable would happen;
1408 sometimes it was "internal error: store_reset failed".
141018. If a server dropped the connection unexpectedly when an Exim client was
1411 using GnuTLS and trying to read a response, the client delivery process
1412 crashed while trying to generate an error log message.
141419. If a "warn" verb in an ACL added multiple headers to a message in a single
1415 string, for example:
1417 warn message = H1: something\nH2: something
1419 the text was added as a single header line from Exim's point of view
1420 though it ended up OK in the delivered message. However, searching for the
1421 second and subsequent header lines using $h_h2: did not work. This has been
1422 fixed. Similarly, if a system filter added multiple headers in this way,
1423 the routers could not see them.
142520. Expanded the error message when iplsearch is called with an invalid key to
1426 suggest using net-iplsearch in a host list.
142821. When running tests using -bh, any delays imposed by "delay" modifiers in
1429 ACLs are no longer actually imposed (and a message to that effect is
1430 output).
143222. If a "gecos" field in a passwd entry contained escaped characters, in
1433 particular, if it contained a \" sequence, Exim got it wrong when building
1434 a From: or a Sender: header from that name. A second bug also caused
1435 incorrect handling when an unquoted " was present following a character
1436 that needed quoting.
143823. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1439 was not being matched caselessly.
144124. Arranged for all hyphens in the exim.8 source to be escaped with
1442 backslashes.
144425. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1445 properly. Recipient callout cache records were still being keyed to include
1446 the sender, even when use_sender was set false. This led to far more
1447 callouts that were necessary. The sender is no longer included in the key
1448 when use_sender is false.
145026. Added "control = submission" modifier to ACLs.
145227. Added the ${base62d: operator to decode base 62 numbers.
145428. dnsdb lookups can now access SRV records.
145629. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1457 the configuration file.
145930. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1460 (-v) mode. This makes the output for a verbose queue run more intelligible.
146231. Added a use_postmaster feature to recipient callouts.
146432. Added the $body_zerocount variable, containing the number of binary zero
1465 bytes in the message body.
146733. The time of last modification of the "new" subdirectory is now used as the
1468 "mailbox time last read" when there is a quota error for a maildir
1469 delivery.
147134. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
147335. Added +ignore_unknown as a special item in host lists.
147536. Code for decoding IPv6 addresses in host lists is now included, even if
1476 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1477 address was recognized as an IP address, but was then not correctly decoded
1478 into binary, causing unexpected and incorrect effects when compared with
1479 another IP address.
1482Exim version 4.34
1485 1. Very minor rewording of debugging text in manualroute to say "list of
1486 hosts" instead of "hostlist".
1488 2. If verify=header_syntax was set, and a header line with an unqualified
1489 address (no domain) and a large number of spaces between the end of the
1490 name and the colon was received, the reception process suffered a buffer
1491 overflow, and (when I tested it) crashed. This was caused by some obsolete
1492 code that should have been removed. The fix is to remove it!
1494 3. When running in the test harness, delay a bit after writing a bounce
1495 message to get a bit more predictability in the log output.
1497 4. Added a call to search_tidyup() just before forking a reception process. In
1498 theory, someone could use a lookup in the expansion of smtp_accept_max_
1499 per_host which, without the tidyup, could leave open a database connection.
1501 5. Added the variables $recipient_data and $sender_data which get set from a
1502 lookup success in an ACL "recipients" or "senders" condition, or a router
1503 "senders" option, similar to $domain_data and $local_part_data.
1505 6. Moved the writing of debug_print from before to after the "senders" test
1506 for routers.
1508 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1509 problems for message scanning, either using a data ACL, or using
1510 local_scan() because the Received: header was not generated till after they
1511 were called (in order to set the time as the time of reception completion).
1512 I have revised the way this works. The header is now generated after the
1513 body is received, but before the ACL or local_scan() are called. After they
1514 are run, the timestamp in the header is updated.
1517Exim version 4.33
1520 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1521 before starting a queue runner without re-exec. This happened only when
1522 deliver_drop_privilege was set or when the Exim user was set to root. The
1523 effect of the bug was that timeouts during subsequent deliveries caused
1524 crashes instead of being properly handled. The handler is now left at its
1525 default (and expected) setting.
1527 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1528 message, again when deliver_drop_privilege is set or Exim is run as root.
1529 The bug described in (1) was not present in this case, but the tidying up
1530 of the other signals was missing. I have made the two cases consistent.
1532 3. The ignore_target_hosts setting on a manualroute router was being ignored
1533 for hosts that were looked up using the /MX notation.
1535 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1536 in domain lists.
1538 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1539 operated on the sender address. After changing the $sender_address to <>
1540 for the sender address verify, Exim was re-instated it as the original
1541 (before rewriting) address, but remembering that it had rewritten it, so it
1542 wasn't rewriting it again. This bug also had the effect of breaking the
1543 sender address verification caching when the sender address was rewritten.
1545 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1546 This has been changed so that if the ip literal address matches
1547 ignore_target_hosts, the router declines.
1549 7. Added expansion conditions match_domain, match_address, and match_local_
1550 part (NOT match_host).
1552 8. The placeholder for the Received: header didn't have a length field set.
1554 9. Added code to Exim itself and to exim_lock to test for a specific race
1555 condition that could lead to file corruption when using MBX delivery. The
1556 issue is with the lockfile that is created in /tmp. If this file is removed
1557 after a process has opened it but before that process has acquired a lock,
1558 there is the potential for a second process to recreate the file and also
1559 acquire a lock. This could lead to two Exim processes writing to the file
1560 at the same time. The added code performs the same test as UW imapd; it
1561 checks after acquiring the lock that its file descriptor still refers to
1562 the same named file.
156410. The buffer for building added header lines was of fixed size, 8192 bytes.
1565 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1566 when Exim is built.
156811. Added the smtp_active_hostname option. If used, this will typically be made
1569 to depend on the incoming interface address. Because $interface_address is
1570 not set up until the daemon has forked a reception process, error responses
1571 that can happen earlier (such as "too many connections") no longer contain
1572 a host name.
157412. If an expansion in a condition on a "warn" statement fails because a lookup
1575 defers, the "warn" statement is abandoned, and the next ACL statement is
1576 processed. Previously this caused the whole ACL to be aborted.
157813. Added the iplsearch lookup type.
158014. Added ident_timeout as a log selector.
158215. Added tls_certificate_verified as a log selector.
158416. Added a global option tls_require_ciphers (compare the smtp transport
1585 option of the same name). This controls incoming TLS connections.
158717. I finally figured out how to make tls_require_ciphers do a similar thing
1588 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1589 before starting the TLS session.
159118. Tabs are now shown as \t in -bP output.
159319. If the log selector return_path_on_delivery was set, Exim crashed when
1594 bouncing a message because it had too many Received: header lines.
159620. If two routers both had headers_remove settings, and the first one included
1597 a superfluous trailing colon, the final name in the first list and the
1598 first name in the second list were incorrectly joined into one item (with a
1599 colon in the middle).
1602Exim version 4.32
1605 1. Added -C and -D options to the exinext utility, mainly to make it easier
1606 to include in the automated testing, but these could be helpful when
1607 multiple configurations are in use.
1609 2. The exinext utility was not formatting the output nicely when there was
1610 an alternate port involved in the retry record key, nor when there was a
1611 message id as well (for retries that were specific to a specific message
1612 and a specific host). It was also confused by IPv6 addresses, because of
1613 the additional colons they contain. I have fixed the IPv4 problem, and
1614 patched it up to do a reasonable job for IPv6.
1616 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1617 delivery, the log line now contains "pipelined" if PIPELINING was used.
1619 4. An SMTP transport process used to panic and die if the bind() call to set
1620 an explicit outgoing interface failed. This has been changed; it is now
1621 treated in the same way as a connect() failure.
1623 5. A reference to $sender_host_name in the part of a conditional expansion
1624 that was being skipped was still causing a DNS lookup. This no longer
1625 occurs.
1627 6. The def: expansion condition was not recognizing references to header lines
1628 that used bh_ and bheader_.
1630 7. Added the _cache feature to named lists.
1632 8. The code for checking quota_filecount in the appendfile transport was
1633 allowing one more file than it should have been.
1635 9. For compatibility with Sendmail, the command line option
1637 -prval:sval
1639 is equivalent to
1641 -oMr rval -oMs sval
1643 and sets the incoming protocol and host name (for trusted callers). The
1644 host name and its colon can be omitted when only the protocol is to be set.
1645 Note the Exim already has two private options, -pd and -ps, that refer to
1646 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1647 "s", but I don't think that's a major issue.
164910. A number of refactoring changes to the code, none of which should affect
1650 Exim's behaviour:
1652 (a) The number of logging options was getting close to filling up the
1653 32-bit word that was used as a bit map. I have split them into two classes:
1654 those that are passed in the argument to log_write(), and those that are
1655 only ever tested independently outside of that function. These are now in
1656 separate 32-bit words, so there is plenty of room for expansion again.
1657 There is no change in the user interface or the logging behaviour.
1659 (b) When building, for example, log lines, the code previously used a
1660 macro that called string_cat() twice, in order to add two strings. This is
1661 not really sufficiently general. Furthermore, there was one instance where
1662 it was actually wrong because one of the argument was used twice, and in
1663 one call a function was used. (As it happened, calling the function twice
1664 did not affect the overall behaviour.) The macro has been replaced by a
1665 function that can join an arbitrary number of extra strings onto a growing
1666 string.
1668 (c) The code for expansion conditions now uses a table and a binary chop
1669 instead of a serial search (which was left over from when there were very
1670 few conditions). Also, it now recognizes conditions like "pam" even when
1671 the relevant support is not compiled in: a suitably worded error message is
1672 given if an attempt is made to use such a condition.
167411. Added ${time_interval:xxxxx}.
167612. A bug was causing one of the ddress fields not to be passed back correctly
1677 from remote delivery subprocesses. The field in question was not being
1678 subsequently used, so this caused to problems in practice.
168013. Added new log selectors queue_time and deliver_time.
168214. Might have fixed a bug in maildirsizefile handling that threw up
1683 "unexpected character" debug warnings, and recalculated the data
1684 unnecessarily. In any case, I expanded the warning message to give more
1685 information.
168715. Added the message "Restricted characters in address" to the statements in
1688 the default ACL that block characters like @ and % in local parts.
169016. Change 71 for release 4.31 proved to be much less benign that I imagined.
1691 Three changes have been made:
1693 (a) There was a serious bug; a negative response to MAIL caused the whole
1694 recipient domain to be cached as invalid, thereby blocking all messages
1695 to all local parts at the same domain, from all senders. This bug has
1696 been fixed. The domain is no longer cached after a negative response to
1697 MAIL if the sender used is not empty.
1699 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1700 been restored.
1702 (c) A new callout option, "use_sender" has been added for people who want
1703 the modified behaviour.
1706Exim version 4.31
1709 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1710 Larry Rosenman.
1712 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1713 indeed breaks things for older releases.
1715 3. Added additional logging to the case where there is a problem reading data
1716 from a filter that is running in a subprocess using a pipe, in order to
1717 try to track down a specific problem.
1719 4. Testing facility fudge: when running in the test harness and attempting
1720 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1721 getting "No route to host". Convert this to a timeout.
1723 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1724 warning.
1726 6. Some OS don't have socklen_t but use size_t instead. This affects the
1727 fifth argument of getsockopt() amongst other things. This is now
1728 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1729 can be set for individual OS. I have set it for SunOS5, OSF1, and
1730 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1731 some earlier ones do not.
1733 7. Change 4.30/15 was not doing the test caselessly.
1735 8. The standard form for an IPv6 address literal was being rejected by address
1736 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1737 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1738 this, as well as the form without the "IPv6" on the front (but only when
1739 address literals are enabled, of course).
1741 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
174310. Exim crashed if a message with an empty sender address specified by -f
1744 encountered a router with an errors_to setting. This could be provoked only
1745 by a command such as
1747 exim -f "" ...
1749 where an empty string was supplied; "<>" did not hit this bug.
175111. Installed PCRE release 4.5.
175312. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1754 remained set. It is now erased.
175613. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1757 times from message ids (which are base 36 rather than the normal 62).
175914. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1760 were being counted as actual protocol errors, and logged if the log
1761 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1762 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1763 and DATA following a set of rejected RCPTs do not count as protocol errors.
1764 In other words, Exim assumes they were pipelined, though this may not
1765 actually be the case. Of course, in all cases the client gets an
1766 appropriate error code.
176815. If a lookup fails in an ACL condition, a message about the failure may
1769 be available; it is used if testing the ACL cannot continue, because most
1770 such messages specify what the cause of the deferral is. However, some
1771 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1772 that caused an old message to be retained and used if a later statement
1773 caused a defer, replacing the real cause of the deferral.
177516. If an IP address had so many PTR records that the DNS lookup buffer
1776 was not large enough to hold them, Exim could crash while trying to process
1777 the truncated data. It now detects and logs this case.
177917. Further to 4.21/58, another change has been made: if (and only if) the
1780 first line of a message (the first header line) ends with CRLF, a bare LF
1781 in a subsequent header line has a space inserted after it, so as not to
1782 terminate the header.
178418. Refactoring: tidied an ugly bit of code in appendfile that copied data
1785 unnecessarily, used atoi() instead of strtol(), and didn't check the
1786 termination when getting file sizes from file names by regex.
178819. Completely re-implemented the support for maildirsize files, in the light
1789 of a number of problems with the previous contributed implementation
1790 (4.30/29). In particular:
1792 . If the quota is zero, the maildirsize file is maintained, but no quota is
1793 imposed.
1795 . If the maildir directory does not exist, it is created before any attempt
1796 to write a maildirsize file.
1798 . The quota value in the file is just a cache; if the quota is changed in
1799 the transport, the new value overrides.
1801 . A regular expression is available for excluding directories from the
1802 count.
180420. The autoreply transport checks the characters in options that define the
1805 message's headers; it allows continued headers, but it was checking with
1806 isspace() after an embedded newline instead of explicitly looking for a
1807 space or a tab.
180921. If all the "regular" hosts to which an address was routed had passed their
1810 expiry times, and had not reached their retry times, the address was
1811 bounced, even if fallback hosts were defined. Now Exim should go on to try
1812 the fallback hosts.
181422. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1815 equivalent code in the SMTP transport. Some hosts send humungous responses
1816 to HELO/EHLO, more than 1024 it seems.
181823. Refactoring: code in filter.c used (void *) for "any old type" but this
1819 gives compiler warnings in some environments. I've now done it "properly",
1820 using a union.
182224. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1823 (because of problems with the built-in one) was declared to return uschar *
1824 instead of char *, causing compiler failure.
182625. Fixed a file descriptor leak when processing alias/forward files.
182826. Fixed a minor format string issue in dbfn.c.
183027. Typo in exim.c: ("dmbnz" for "dbmnz").
183228. If a filter file refered to $h_xxx or $message_headers, and the headers
1833 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1834 become corrupted.
183629. When a sender address is verified, it is cached, to save repeating the test
1837 when there is more than one recipient in a message. However, when the
1838 verification involves a callout, it is possible for different callout
1839 options to be set for different recipients. It is too complicated to keep
1840 track of this in the cache, so now Exim always runs a verification when a
1841 callout is required, relying on the callout cache for the optimization.
1842 The overhead is duplication of the address routing, but this should not be
1843 too great.
184530. Fixed a bug in callout caching. If a RCPT command caused the sender address
1846 to be verified with callout=postmaster, and the main callout worked but the
1847 postmaster check failed, the verification correctly failed. However, if a
1848 subsequent RCPT command asked for sender verification *without* the
1849 postmaster check, incorrect caching caused this verification also to fail,
1850 incorrectly.
185231. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1853 it was not caching the DNS options (qualify_single, search_parents) that
1854 were used when the lookup failed. A subsequent lookup with different
1855 options therefore always gave the same answer, though there were cases
1856 where it should not have. (Example: a "domains = !$mx_any" option on a
1857 dnslookup router: the "domains" option is always processed without any
1858 widening, but the router might have qualify_single set.) Now Exim uses the
1859 cached value only when the same options are set.
186132. Added John Jetmore's "exipick" utility to the distribution.
186333. GnuTLS: When an attempt to start a TLS session fails for any reason other
1864 than a timeout (e.g. a certificate is required, and is not provided), an
1865 Exim server now closes the connection immediately. Previously it waited for
1866 the client to close - but if the client is SSL, it seems that they each
1867 wait for each other, leading to a delay before one of them times out.
186934: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1870 maintained 0.8.x compatibility because I don't think many are using it, and
1871 it is clearly obsolete.
187335. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1874 transport.
187636. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1877 client certificate was expired. A simple patch fixes this, though I don't
1878 understand the full logic of why the verify callback is called multiple
1879 times.
188137. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1882 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1883 which causes problems with some clients (such as the Certicom SSL Plus
1884 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1885 disables the coutermeasure allowing Eudora to connect."
188738. Exim was not checking that a write() to a log file succeeded. This could
1888 lead to Bad Things if a log got too big, in particular if it hit a file
1889 size limit. Exim now panics and dies if it cannot write to a log file, just
1890 as it does if it cannot open a log file.
189239. Modified OS/Makefile-Linux so that it now contains
1896 The two -D definitions ensure that Exim is compiled with large file
1897 support, which makes it possible to handle log files that are bigger than
1898 2^31.
190040. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1901 instance) a domain was checked against a named list that involved a lookup,
1902 causing $domain_data to be set, then another domain was checked against the
1903 same list, then the first domain was re-checked, the value of $domain_data
1904 after the final check could be wrong. In particular, if the second check
1905 failed, it could be set empty. This bug probably also applied to
1906 $localpart_data.
190841. The strip_trailing_dot option was not being applied to the address given
1909 with the -f command-line option.
191142. The code for reading a message's header from the spool was incrementing
1912 $received_count, but never initializing it. This meant that the value was
1913 incorrect (doubled) while delivering a message in the same process in which
1914 it was received. In the most common configuration of Exim, this never
1915 happens - a fresh exec is done - but it can happen when
1916 deliver_drop_privilege is set.
191843. When Exim logs an SMTP synchronization error - client data sent too soon -
1919 it now includes up to 150 characters of the unexpected data in the log
1920 line.
192244. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1923 and building data strings. The size of both of these buffers was 10 000
1924 bytes - far larger than anybody would *ever* want, thought I. Needless to
1925 say, somebody hit the limit. I have increased the maximum line length to
1926 20 000 and the maximum data length of concatenated lines to 100 000. I have
1927 also fixed two bugs, because there was no checking on these buffers. Tsk,
1928 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1929 buffer is too small.
193145. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1932 lsearch lookups. Now it does.
193446. When parsing a route_list item in a manualroute router, a fixed-length
1935 buffer was used for the list of hosts. I made this 1024 bytes long,
1936 thinking that nobody would ever have a list of hosts that long. Wrong.
1937 Somebody had a whole pile of complicated expansion conditions, and the
1938 string was silently truncated, leading to an expansion error. It turns out
1939 that it is easier to change to an unlimited length (owing to other changes
1940 that have happened since this code was originally written) than to build
1941 structure for giving a limitation error. The length of the item that
1942 expands into the list of hosts is now unlimited.
194447. The lsearch lookup could not handle data where the length of text line was
1945 more than 4095 characters. Such lines were truncated, leading to shortened
1946 data being returned. It should now handle lines of any length.
194848. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1949 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1950 ACL").
195249. Cosmetic tidy to scripts like exicyclog that are generated by globally
1953 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1954 no longer happens in comment lines. A list of replacements is now placed
1955 at the head of all of the source files, except those whose only change is
1956 to replace PERL_COMMAND in the very first #! line.
195850. Replaced the slow insertion sort in queue.c, for sorting the list of
1959 messages on the queue, with a bottom-up merge sort, using code contributed
1960 by Michael Haardt. This should make operations like -bp somewhat faster on
1961 large queues. It won't affect queue runners, except when queue_run_in_order
1962 is set.
196451. Installed eximstats 1.31 in the distribution.
196652. Added support for SRV lookups to the dnslookup router.
196853. If an ACL referred to $message_body or $message_body_end, the value was not
1969 reset for any messages that followed in the same SMTP session.
197154. The store-handling optimization for building very long strings was not
1972 differentiating between the different store pools. I don't think this
1973 actually made any difference in practice, but I've tidied it.
197555. While running the routers to verify a sender address, $sender_address
1976 was still set to the sender address. This is wrong, because when routing to
1977 send a bounce to the sender, it would be empty. Therefore, I have changed
1978 it so that, while verifying a sender address, $sender_address is set to <>.
1979 (There is no change to what happens when verifying a recipient address.)
198156. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1982 target A or AAAA records (if not already returned) without resetting the
1983 qualify_single or search_parents options of the DNS resolver. These are
1984 inappropriate in this case because the targets of MX and SRV records must
1985 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1986 target that, when qualified, matched something in the local domain. These
1987 two options are now turned off when doing these lookups.
198957. It seems that at least some releases of Reiserfs (which does not have the
1990 concept of a fixed number of inodes) returns zero and not -1 for the
1991 number of available inodes. This interacted badly with check_spool_inodes,
1992 which assumed that -1 was the "no such thing" setting. What I have done is
1993 to check that the total number of inodes is greater than zero before doing
1994 the test of how many are available.
199658. When a "warn" ACL statement has a log_message modifier, the message is
1997 remembered, and not repeated. This is to avoid a lot of repetition when a
1998 message has many recipients that cause the same warning to be written.
1999 Howewer, Exim was preserving the list of already written lines for an
2000 entire SMTP session, which doesn't seem right. The memory is now reset if a
2001 new message is started.
200359. The "rewrite" debugging flag was not showing the result of rewriting in the
2004 debugging output unless log_rewrite was also set.
200660. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
2007 of (int)(handle) when we know that handle contains (void *)(-1).
200961. The Exim daemon panic-logs an error return when it closes the incoming
2010 connection. However "connection reset by peer" seems to be common, and
2011 isn't really an error worthy of noting specially, so that particular error
2012 is no long logged.
201462. When Exim is trying to find all the local interfaces, it used to panic and
2015 die if the ioctl to get the interface flags failed. However, it seems that
2016 on at least one OS (Solaris 9) it is possible to have an interface that is
2017 included in the list of interfaces, but for which you get a failure error
2018 for this call. This happens when the interface is not "plumbed" into a
2019 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
2020 failure of the "get flags" call assumes that the interface is down.
202263. Added a ${eval10: operator, which assumes all numbers are decimal. This
2023 makes life easier for people who are doing arithmetic on fields extracted
2024 from dates, where you often get leading zeros that should not be
2025 interpreted as octal.
202764. Added qualify_domain to the redirect router, to override the global
2028 setting.
203065. If a pathologically long header line contained very many addresses (the
2031 report of this problem mentioned 10 000) and each of them was rewritten,
2032 Exim could use up a very large amount of memory. (It kept on making new
2033 copies of the header line as it rewrote, and never released the old ones.)
2034 At the expense of a bit more processing, the header rewriting function has
2035 been changed so that it no longer eats memory in this way.
203766. The generation of the Received: header has been moved from the time that a
2038 message starts to be received, to the time that it finishes. The timestamp
2039 in the Received: header should now be very close to that of the <= log
2040 line. There are two side-effects of this change:
2042 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
2043 logged header lines no longer include the local Received: line, because
2044 it has not yet been created. The same applies to a copy of the message
2045 that is returned to a non-SMTP sender when a message is rejected.
2047 (b) When a filter file is tested using -bf, no additional Received: header
2048 is added to the test message. After some thought, I decided that this
2049 is a bug fix.
2051 This change does not affect the value of $received_for. It is still set
2052 after address rewriting, but before local_scan() is called.
205467. Installed the latest Cygwin-specific files from the Cygwin maintainer.
205668. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
2057 gave an unhelpful panic error message, and a defer error. I have managed to
2058 change this behaviour so that it now rejects any supplied certificate,
2059 which seems right, as the list of acceptable certificates is empty.
206169. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
2062 gave an unhelpful defer error. I have not managed to make this reject any
2063 supplied certificates, but the error message it gives is "no certificate
2064 supplied", which is not helpful.
206670. exigrep's output now also includes lines that are not associated with any
2067 message, but which match the given pattern. Implemented by a patch from
2068 Martin Sluka, which also tidied up the Perl a bit.
207071. Recipient callout verification, like sender verification, was using <> in
2071 the MAIL FROM command. This isn't really the right thing, since the actual
2072 sender may affect whether the remote host accepts the recipient or not. I
2073 have changed it to use the actual sender in the callout; this means that
2074 the cache record is now keyed on a recipient/sender pair, not just the
2075 recipient address. There doesn't seem to be a real danger of callout loops,
2076 since a callout by the remote host to check the sender would use <>.
2077 [SEE ABOVE: changed after hitting problems.]
207972. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
2080 temporary errors. However, in the case of such a code being given after
2081 the end of a data transmission (i.e. after ".") Exim was failing to write
2082 a retry record for the message. (Yes, there was some broken host that was
2083 actually sending 8xx at this point.)
208573. An unknown lookup type in a host list could cause Exim to panic-die when
2086 the list was checked. (An example that provoked this was putting <; in the
2087 middle of a list instead of at the start.) If this happened during a DATA
2088 ACL check, a -D file could be left lying around. This kind of configuration
2089 error no longer causes Exim to die; instead it causes a defer errror. The
2090 incident is still logged to the main and panic logs.
209274. Buglet left over from Exim 3 conversion. The message "too many messages
2093 in one connection" was written to the rejectlog but not the mainlog, except
2094 when address rewriting (yes!) was being logged.
209675. Added write_rejectlog option.
209876. When a system filter was run not as root (that is, when system_filter_user
2099 was set), the values of the $n variables were not being returned to the
2100 main process; thus, they were not subsequently available in the $sn
2101 variables.
210377. Added +return_path_on_delivery log selector.
210578. A connection timeout was being treated differently from recipients deferred
2106 when testing hosts_max_try with a message that was older than the host's
2107 retry timeout. (The host should not be counted, thus allowing all hosts to
2108 be tried at least once before bouncing.) This may have been the cause of an
2109 occasionally reported bug whereby a message would remain on the queue
2110 longer than the retry timeout, but would be bounced if a delivery was
2111 forced. I say "may" because I never totally pinned down the problem;
2112 setting up timeout/retry tests is difficult. See also the next item.
211479. The ultimate address timeout was not being applied to errors that involved
2115 a combination of host plus message (for example, a timeout on a MAIL
2116 command). When an address resolved to a number of possible hosts, and they
2117 were not all tried for each delivery (e.g. because of hosts_max_try), a
2118 message could remain on the queue longer than the retry timeout.
212080. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
2121 Haardt.
212381. Fixed an obscure SMTP outgoing bug which required at least the following
2124 conditions: (a) there was another message waiting for the same server;
2125 (b) the server returned 5xx to all RCPT commands in the first message so
2126 that the message was not completed; (c) the server dropped the connection
2127 or gave a negative response to the RSET that Exim sends to abort the
2128 transaction. The observed case was a dropped connection after DATA that had
2129 been sent in pipelining mode. That is, the server had advertised PIPELINING
2130 but was not implementing it correctly. The effect of the bug was incorrect
2131 behaviour, such as trying another host, and this could lead to a crash.
2134Exim version 4.30
2137 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
2138 and daemon.c were passed as pointers to ints; they should have been
2139 pointers to socklen_t variables (which are typically unsigned ints).
2141 2. Some signed/unsigned type warnings in the os.c file for Linux have been
2142 fixed.
2144 3. Fixed a really odd bug that affected only the testing scheme; patching a
2145 certain fixed string in the binary changed the value of another string that
2146 happened to be identical to the end of the original first string.
2148 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
2149 name", it returns that address as the IP address. On some operating
2150 systems (e.g. Solaris), it also passes back the IP address string as the
2151 "host name". However, on others (e.g. Linux), it passes back an empty
2152 string. Exim wasn't checking for this, and was changing the host name to an
2153 empty string, assuming it had been canonicized.
2155 5. Although rare, it is permitted to have more than one PTR record for a given
2156 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
2157 all the names associated with an address, because they do in Solaris.
2158 However, it seems that they do not in Linux for data that comes from the
2159 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
2160 I found this out when I moved to a new Linux workstation and tried to run
2161 the Exim test suite.
2163 To get round this problem I have changed the code so that it now does its
2164 own call to the DNS to look up PTR records when searching for a host name.
2165 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
2166 addresses that are only in /etc/hosts are still found.
2168 This behaviour is, however, controlled by an option called host_lookup_
2169 order, which defaults to "bydns:byaddr". If people want to use the other
2170 order, or indeed, just use one or the other means of lookup, they can
2171 specify it in this variable.
2173 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
2174 some operating systems, this comes back from gethostbyaddr() as an empty
2175 string, and this is what Exim used to test for. However, it seems that in
2176 other systems, "." is yielded. Exim now tests for this case too.
2178 7. The values of check_spool_space and check_log_space are now held internally
2179 as a number of kilobytes instead of an absolute number of bytes. If a
2180 numbers is specified without 'K' or 'M', it is rounded up to the nearest
2181 kilobyte. This means that much larger values can be stored.
2183 8. Exim monitor: an attempt to get the action menu when not actually pointing
2184 at a message produces an empty menu entitled "No message selected". This
2185 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
2186 no entries in it ("Shell widget menu has zero width and/or height"). So I
2187 have added a single, blank menu entry in this case.
2189 9. Added ${quote_local_part.
219110. MIME decoding is now applied to the contents of Subject: header lines when
2192 they are logged.
219411. Now that a reference to $sender_host_address automatically causes a reverse
2195 lookup to occur if necessary (4.13/18), there is no need to arrange for a
2196 host lookup before query-style lookups in lists that might use this
2197 variable. This has therefore been abolished, and the "net-" prefix is no
2198 longer necessary for query-style lookups.
220012. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
2201 have been a typo for LFLAGS, so it has been changed.
220313. The install script calls Exim with "-C /dev/null" in order to find the
2204 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
2205 to be output. Howeve, since Exim outputs its version number before the
2206 error, it didn't break the script. It just looked ugly. I fixed this by
2207 always allowing "-C /dev/null" if the caller is root.
220914. Ignore overlarge ACL variable number when reading spool file - insurance
2210 against a later release with more variables having written the file.
221215. The standard form for an IPv6 address literal was being rejected by EHLO.
2213 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
2214 this, as well as the form without the "IPv6" on the front.
221616. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
2217 OS/Makefile-Darwin file.
221917. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
2220 only to LDAP libraries that do not have LDAP_OPT_DEREF.
222218. After change 4.21/52, "%ld" was used to format the contents of the $inode
2223 variable. However, some OS use ints for inodes. I've added cast to long int
2224 to get rid of the compiler warning.
222619. I had forgotten to lock out "/../" in configuration file names when
2227 ALT_CONFIG_PREFIX was set.
222920. Routers used for verification do not need to specify transports. However,
2230 if such a router generated a host list, and callout was configured, Exim
2231 crashed, because it could not find a port number from the (non-existent)
2232 transport. It now assumes port 25 in this circumstance.
223421. Added the -t option to exigrep.
223622. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
2237 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
2238 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
2239 them is set, LOOKUP_LSEARCH is forced.
224123. "exim -bV" now outputs a list of lookups that are included in the binary.
224324. Added sender and host information to the "rejected by local_scan()" log
2244 line; previously there was no indication of these.
224625. Added .include_if_exists.
224826. Change 3.952/11 added an explicit directory sync on top of a file sync for
2249 Linux. It turns out that not all file systems support this. Apparently some
2250 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
2251 do it.) To cope with this, the error EINVAL, which means that sync-ing is
2252 not supported on the file descriptor, is now ignored when Exim is trying to
2253 sync a directory. This applies only to Linux.
225527. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
225728. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
2258 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
2259 this.
226129. Added support for maildirsize files from supplied patch (modified a bit).
226330. The use of :fail: followed by an empty string could lead Exim to respond to
2264 sender verification failures with (e.g.):
2266 550 Verification failed for <xxx>
2267 550 Sender verify failed
2269 where the first response line was missing the '-' that indicates it is not
2270 the final line of the response.
227231. The loop for finding the name of the user that called Exim had a hardwired
2273 limit of 10; it now uses the value of finduser_retries, which is used for
2274 all other user lookups.
227632. Added $received_count variable, available in data and not_smtp ACLs, and at
2277 delivery time.
227933. Exim was neglecting to zero errno before one call of strtol() when
2280 expanding a string and expecting an integer value. On some systems this
2281 resulted in spurious "integer overflow" errors. Also, it was casting the
2282 result into an int without checking.
228434. Testing for a connection timeout using "timeout_connect" in the retry rules
2285 did not work. The code looks as if it has *never* worked, though it appears
2286 to have been documented since at least releast 1.62. I have made it work.
228835. The "timeout_DNS" error in retry rules, also documented since at least
2289 1.62, also never worked. As it isn't clear exactly what this means, and
2290 clearly it isn't a major issue, I have abolished the feature by treating it
2291 as "timeout", and writing a warning to the main and panic logs.
229336. The display of retry rules for -brt wasn't always showing the error code
2294 correctly.
229637. Added new error conditions to retry rules: timeout_A, timeout_MX,
2297 timeout_connect_A, timeout_connect_MX.
229938. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
2300 to the empty sender.
230239. The daemon was not analysing the content of -oX till after it had closed
2303 stderr and disconnected from the controlling terminal. This meant that any
2304 syntax errors were only noted on the panic log, and the return code from
2305 the command was 0. By re-arranging the code a little, I've made the
2306 decoding happen first, so such errors now appear on stderr, and the return
2307 code is 1. However, the actual setting up of the sockets still happens in
2308 the disconnected process, so errors there are still only recorded on the
2309 panic log.
231140. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
2312 connections (as happens on some IP stacks) was logged at start up time as
2313 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
2314 it from "IPv6 and IPv4", which means that two separate sockets are being
2315 used.
231741. The debug output for gethostbyname2() or getipnodebyname() failures now
2318 says whether AF_INET or AF_INET6 was passed as an argument.
232042. Exiwhat output was messed up when time zones were included in log
2321 timestamps.
232343. Exiwhat now gives more information about the daemon's listening ports,
2324 and whether -tls-on-connect was used.
232644. The "port" option of the smtp transport is now expanded.
232845. A "message" modifier in a "warn" statement in a non-message ACL was being
2329 silently ignored. Now an error message is written to the main and panic
2330 logs.
233246. There's a new ACL modifier called "logwrite" which writes to a log file
2333 as soon as it is encountered.
233547. Added $local_user_uid and $local_user_gid at routing time.
233748. Exim crashed when trying to verify a sender address that was being
2338 rewritten to "<>".
234049. Exim was recognizing only a space character after ".include". It now also
2341 recognizes a tab character.
234350. Fixed several bugs in the Perl script that creates the exim.8 man page by
2344 extracting the relevant information from the specification. The man page no
2345 longer contains scrambled data for the -d option, and I've added a section
2346 at the front about calling Exim under different names.
234851. Added "extra_headers" argument to the "mail" command in filter files.
235052. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
2351 crash.
235353. Installed eximstats 1.29.
235554. Added transport_filter_timeout as a generic transport option.
235755. Exim no longer adds an empty Bcc: header to messages that have no To: or
2358 Cc: header lines. This was required by RFC 822, but it not required by RFC
2359 2822.
236156. Exim used to add From:, Date:, and Message-Id: header lines to any
2362 incoming messages that did not have them. Now it does so only if the
2363 message originates locally, that is, if there is no associated remote host
2364 address. When Resent- header lines are present, this applies to the Resent-
2365 lines rather than the non-Resent- lines.
236757. Drop incoming SMTP connection after too many syntax or protocol errors. The
2368 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
237058. Messages for configuration errors now include the name of the main
2371 configuration file - useful now that there may be more than one file in a
2372 list (.included file names were always shown).
237459. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
2375 for those rare installations that do not start the daemon as root or run it
2376 setuid root. I've cut out the call to initgroups() if the daemon is not
2377 root at that time.
237960. The Exim user and group can now be bound into the binary as text strings
2380 that are looked up at the start of Exim's processing.
238261. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
238462. Added $mailstore_basename variable.
238663. Installed patch to sieve.c from Michael Haardt.
238864. When Exim failed to open the panic log after failing to open the main log,
2389 the original message it was trying to log was written to stderr and debug
2390 output, but if they were not available (the usual case in production), it
2391 was lost. Now it is written to syslog before the two lines that record the
2392 failures to open the logs.
239465. Users' Exim filters run in subprocesses under the user's uid. It is
2395 possible for a "deliver" command or an alias in a "personal" command to
2396 provoke an address rewrite. If logging of address rewriting is configured,
2397 this fails because the process is not running as root or exim. There may be
2398 a better way of dealing with this, but for the moment (because 4.30 needs
2399 to be released), I have disabled address rewrite logging when running a
2400 filter in a non-root, non-exim process.
2403Exim version 4.24
2406 1. The buildconfig auxiliary program wasn't quoting the value set for
2407 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
2408 not defined. This bug was masked in 4.22 by the effect that was fixed in
2409 change 4.23/1.
2411 2. Some messages that were rejected after a message id was allocated were
2412 shown as "incomplete" by exigrep. It no longer does this for messages that
2413 are rejected by local_scan() or the DATA or non-SMTP ACLs.
2415 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
2416 have allow_domain_literals set, the ID did not get logged in the <= line.
2417 Domain literals are now always recognized in Message-ID: header lines.
2419 4. The first argument for a ${extract expansion item is the key name or field
2420 number. Leading and trailing spaces in this item were not being ignored,
2421 causing some misleading effects.
2423 5. When deliver_drop_privilege was set, single queue runner processes started
2424 manually (i.e. by the command "exim -q") or by the daemon (which uses the
2425 same command in the process it spins off) were not dropping privilege.
2427 6. When the daemon running as "exim" started a queue runner, it always
2428 re-executed Exim in the spun-off process. This is a waste of effort when
2429 deliver_drop_privilege is set. The new process now just calls the
2430 queue-runner function directly.
2433Exim version 4.23
2436 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2439 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2440 ignored. Though the use of -oP was forcing the writing of a pid file, it
2441 was always written to the default place.
2443 3. If the message "no IP address found for host xxxx" is generated during
2444 incoming verification, it is now followed by identification of the incoming
2445 connection (so you can more easily find what provoked it).
2447 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2449 5. Added some features to "harden" Exim a bit more against certain attacks:
2451 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2452 be put in Local/Makefile. This is like the never_users runtime option,
2453 but it cannot be overridden. The default setting is "root".
2455 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2456 prefix string with which any file named in a -C command line option
2457 must start.
2459 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2460 is retained for -C and -D only if the caller of Exim is root. Without
2461 it, the exim user may also use -C and -D and retain privilege.
2463 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2464 command line option is disabled.
2466 6. Macro names set by the -D option must start with an upper case letter, just
2467 like macro names defined in the configuration file.
2469 7. Added "dereference=" facility to LDAP.
2471 8. Two instances of the typo "uknown" in the source files are fixed.
2473 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2474 the Configure-Makefile script screwed up while processing it.
247610. Incorporated PCRE 4.4.
247811. The SMTP synchronization check was not operating right at the start of an
2479 SMTP session. For example, it could not catch a HELO sent before the client
2480 waited for the greeting. There is now a check for outstanding input at the
2481 point when the greeting is written. Because of the duplex, asynchronous
2482 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2483 way, but not yet received, when the check is performed.
248512. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2486 on TCP/IP sockets, because this apparently causes some broken clients to
2487 timeout.
248913. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2490 unchanged) from the Cygwin maintainer.
249214. The code for -bV that shows what is in the binary showed "mbx" when maildir
2493 was supported instead of testing for mbx. Effectively a typo.
249515. The spa authenticator server code was not checking that the input it
2496 received was valid base64.
249816. The debug output line for the "set" modifier in ACLs was not showing the
2499 name of the variable that was being set.
250117. Code tidy: the variable type "vtype_string" was never used. Removed it.
250318. Previously, a reference to $sender_host_name did not cause a DNS reverse
2504 lookup on its own. Something else was needed to trigger the lookup. For
2505 example, a match in host_lookup or the need for a host name in a host list.
2506 Now, if $sender_host_name is referenced and the host name has not yet been
2507 looked up, a lookup is performed. If the lookup fails, the variable remains
2508 empty, and $host_lookup_failed is set to "1".
251019. Added "eqi" as a case-independent comparison operator.
251220. The saslauthd authentication condition could segfault if neither service
2513 nor realm was specified.
251521. If an overflowing value such as "2048M" was set for message_size_limit, the
2516 error message that was logged was misleading, and incoming SMTP
2517 connections were dropped. The message is now more accurate, and temporary
2518 errors are given to SMTP connections.
252022. In some error situations (such as 21 above) Exim rejects all SMTP commands
2521 (except RSET) with a 421 error, until QUIT is received. However, it was
2522 failing to send a response to QUIT.
252423. The HELO ACL was being run before the code for helo_try_verify_hosts,
2525 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2526 ACL is now run after the helo_try_verify_hosts code.
252824. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2529 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2530 case-independent, so other case variants are also recognized). Apparently
2531 some systems use these upper case variants.
253325. If more than two messages were waiting for the same host, and a transport
2534 filter was specified for the transport, Exim sent two messages over the
2535 same TCP/IP connection, and then failed with "socket operation on non-
2536 socket" when it tried to send the third.
253826. Added Exim::debug_write and Exim::log_write for embedded Perl use.
254027. The extern definition of crypt16() in expand.c was not being excluded when
2541 the OS had its own crypt16() function.
254328. Added bounce_return_body as a new option, and bounce_return_size_limit
2544 as a preferred synonym for return_size_limit, both as an option and as an
2545 expansion variable.
254729. Added LIBS=-liconv to OS/Makefile-OSF1.
254930. Changed the default configuration ACL to relax the local part checking rule
2550 for addresses that are not in any local domains. For these addresses,
2551 slashes and pipe symbols are allowed within local parts, but the sequence
2552 /../ is explicitly forbidden.
255431. SPA server authentication was not clearing the challenge buffer before
2555 using it.
255732. log_message in a "warn" ACL statement was writing to the reject log as
2558 well as to the main log, which contradicts the documentation and doesn't
2559 seem right (because no rejection is happening). So I have stopped it.
256133. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2562 However, I am unable to do any testing of this.
256434. Fixed an infelicity in the appendfile transport. When checking directories
2565 for a mailbox, to see if any needed to be created, it was accidentally
2566 using path names with one or more superfluous leading slashes; tracing
2567 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
256935. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2570 contents are added to the log line that is written for every discarded
2571 recipient. (Previously a log_message setting was ignored.)
257336. The ${quote: operator now quotes the string if it is empty.
257537. The install script runs exim in order to find its version number. If for
2576 some reason other than non-existence or emptiness, which it checks, it
2577 could not run './exim', it was installing it with an empty version number,
2578 i.e. as "exim-". This error state is now caught, and the installation is
2579 aborted.
258138. An argument was missing from the function that creates an error message
2582 when Exim fails to connect to the socket for saslauthd authentication.
2583 This could cause Exim to crash, or give a corrupted message.
258539. Added isip, isip4, and isip6 to ${if conditions.
258740. The ACL variables $acl_xx are now saved with the message, and can be
2588 accessed later in routers, transports, and filters.
259041. The new lookup type nwildlsearch is like wildlsearch, except that the key
2591 strings in the file are not string-expanded.
259342. If a MAIL command specified a SIZE value that was too large to fit into an
2594 int variable, the check against message_size_limit failed. Such values are
2595 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2596 day this will have to be increased, but I don't think I want to be around
2597 when emails are that large.
2601Exim version 4.22
2604 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2605 iconv() is not standard in FreeBSD.
2607 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2608 IPv6 enabled. The observed symptom was a segmentation fault on return from
2609 the function os_common_find_running_interfaces() in src/os.c.
2611 3. In the check_special_case() function in daemon.c I had used "errno" as an
2612 argument name, which causes warnings on some systems. This was basically a
2613 typo, since it was named "eno" in the comments!
2615 4. The code that waits for the clock to tick (at a resolution of some fraction
2616 of a second) so as to ensure message-id uniqueness was always waiting for
2617 at least one whole tick, when it could have waited for less. [This is
2618 almost certainly not relevant at current processor speeds, where it is
2619 unlikely to ever wait at all. But we try to future-proof.]
2621 5. The function that sleeps for a time interval that includes fractions of a
2622 second contained a race. It did not block SIGALRM between setting the
2623 timer, and suspending (a couple of lines later). If the interval was short
2624 and the sigsuspend() was delayed until after it had expired, the suspension
2625 never ended. On busy systems this could lead to processes getting stuck for
2626 ever.
2628 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2629 process, before it forks any delivery processes. The open lookup caching
2630 mechanism meant that the open file or database connection was passed into
2631 the delivery process. The problem was that delivery processes always tidy
2632 up cached lookup data. This could cause a problem for the next delivery
2633 process started by the queue runner, because the external queue runner
2634 process does not know about the closure. So the next delivery process
2635 still has data in the lookup cache. In the case of a file lookup, there was
2636 no problem because closing a file descriptor in a subprocess doesn't affect
2637 the parent. However, if the lookup was caching a connection to a database,
2638 the connection was closed, and the second delivery process was likely to
2639 see errors such as "PGSQL: query failed: server closed the connection
2640 unexpectedly". The problem has been fixed by closing all cached lookups
2641 in a queue runner before running a delivery process.
2643 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2644 seem to have the "const" qualifier which it has on other OS. I've
2645 parameterised it.
2647 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2648 *of the same type* (client or server) with the same public name that an
2649 error should be diagnosed.
2651 9. When Exim looked up a host name for an IP address, but failed to find the
2652 original IP address when looking up the host name (a safety check), it
2653 output the message "<ip address> does not match any IP for NULL", which was
2654 confusing, to say the least. The bug was that the host name should have
2655 appeared instead of "NULL".
265710. Since release 3.03, if Exim is called by a uid other than root or the Exim
2658 user that is built into the binary, and the -C or -D options is used, root
2659 privilege is dropped before the configuration file is read. In addition,
2660 logging is switched to stderr instead of the normal log files. If the
2661 configuration then re-defines the Exim user, the unprivileged environment
2662 is probably not what is expected, so Exim logs a panic warning message (but
2663 proceeds).
2665 However, if deliver_drop_privilege is set, the unprivileged state may well
2666 be exactly what is intended, so the warning has been cut out in that case,
2667 and Exim is allowed to try to write to its normal log files.
2670Exim version 4.21
2673 1. smtp_return_error_details was not giving details for temporary sender
2674 or receiver verification errors.
2676 2. Diagnose a configuration error if two authenticators have the same public
2677 name.
2679 3. Exim used not to create the message log file for a message until the first
2680 delivery attempt. This could be confusing when incoming messages were held
2681 for policy or load reasons. The message log file is now created at the time
2682 the message is received, and an initial "Received" line is written to it.
2684 4. The automatically generated man page for command line options had a minor
2685 bug that caused no ill effects; however, a more serious problem was that
2686 the procedure for building the man page automatically didn't always
2687 operate. Consequently, release 4.20 contains an out-of-date version. This
2688 shouldn't happen again.
2690 5. When building Exim with embedded Perl support, the script that builds the
2691 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2692 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2694 6. The freeze_tell option was not being used for messages that were frozen on
2695 arrival, either by an ACL or by local_scan().
2697 7. Added the smtp_incomplete_transaction log selector.
2699 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2700 was accepting AUTH without a new EHLO.
2702 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2703 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2704 RFC.
270610. Logging of TCP/IP connections (when configured) now happens in the main
2707 daemon process instead of the child process, so that the TCP/IP connection
2708 count is more accurate (but it can never be perfect).
271011. The use of "drop" in a nested ACL was not being handled correctly in the
2711 outer ACL. Now, if condition failure induced by the nested "drop" causes
2712 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2713 or "require"), the connection is dropped.
271512. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2716 that yield "discard" can now be used with an "accept" or a "discard" verb,
2717 but an error is generated for any others (because I can't see a useful way
2718 to define what should happen).
272013. When an ACL is read dynamically from a file (or anywhere else), the lines
2721 are now processed in the same way as lines in the Exim configuration file.
2722 In particular, continuation lines are supported.
272414. Added the "dnslists = a.b.c!=n.n.n.n" feature.
272615. Added -ti meaning -t -i.
272816. Check for letters, digits, hyphens, and dots in the names of dnslist
2729 domains, and warn by logging if others are found.
273117. At least on BSD, alignment is not guarenteed for the array of ifreq's
2732 returned from GIFCONF when Exim is trying to find the list of interfaces on
2733 a host. The code in os.c has been modified to copy each ifreq to an aligned
2734 structure in all cases.
2736 Also, in some cases, the returned ifreq's were being copied to a 'struct
2737 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2738 means the last couple of bytes of an IPv6 address could be chopped if the
2739 ifreq contained only a normal sockaddr (14 bytes storage).
274118. Named domain lists were not supported in the hosts_treat_as_local option.
2742 An entry such as +xxxx was not recognized, and was treated as a literal
2743 domain name.
274519. Ensure that header lines added by a DATA ACL are included in the reject log
2746 if the ACL subsequently rejects the message.
274820. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
2749 MD5 (which is deprecated).
275121. When testing a filter file using -bf, Exim was writing a message when it
2752 took the sender from a "From " line in the message, but it was not doing so
2753 when it took $return_path from a Return-Path: header line. It now does.
275522. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2756 with a valid header line field name (a series of printing characters
2757 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
275923. Changed "disc" in the source to "disk" to conform to the documentation and
2760 the book and for uniformity.
276224. Ignore Sendmail's -Ooption=value command line item.
276425. When execve() failed while trying to run a command in a pipe transport,
2765 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2766 could be confused with a return value of 69 from the command itself. This
2767 has been changed to 127, the value the shell returns if it is asked to run
2768 a non-existent command. The wording for the related log line suggests a
2769 non-existent command as the problem.
277126. If received_header_text expands to an empty string, do not add a Received:
2772 header line to the message. (Well, it adds a token one on the spool, but
2773 marks it "old" so that it doesn't get used or transmitted.)
277527. Installed eximstats 1.28 (addition of -nt option).
277728. There was no check for failure on the call to getsockname() in the daemon
2778 code. This can fail if there is a shortage of resources on the system, with
2779 ENOMEM, for example. A temporary error is now given on failure.
278129. Contrary to the C standard, it seems that in some environments, the
2782 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2783 program. Exim now does this explicitly; it affects the formatting of
2784 timestamps using strftime().
278630. If exiqsumm was given junk data, it threw up some uninitialized variable
2787 complaints. I've now initialized all the variables, to avoid this.
278932. Header lines added by a system filter were not being "seen" during
2790 transport-time rewrites.
279233. The info_callback() function passed to OpenSSL is set up with type void
2793 (*)(SSL *, int, int), as described somewhere. However, when calling the
2794 function (actually a macro) that sets it up, the type void(*)() is
2795 expected. I've put in a cast to prevent warnings from picky compilers.
279734. If a DNS black list lookup found a CNAME record, but there were no A
2798 records associated with the domain it pointed at, Exim crashed.
280035. If a DNS black list lookup returned more than one A record, Exim ignored
2801 all but the first. It now scans all returned addresses if a particular IP
2802 value is being sought. In this situation, the contents of the
2803 $dnslist_value variable are a list of all the addresses, separated by a
2804 comma and a space.
280636. Tightened up the rules for host name lookups using reverse DNS. Exim used
2807 to accept a host name and all its aliases if the forward lookup for any of
2808 them yielded the IP address of the incoming connection. Now it accepts only
2809 those names whose forward lookup yields the correct IP address. Any other
2810 names are discarded. This closes a loophole whereby a rogue DNS
2811 administrator could create reverse DNS records to break through a
2812 wildcarded host restriction in an ACL.
281437. If a user filter or a system filter that ran in a subprocess used any of
2815 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2816 the wrong values were passed to the pipe command ($thisaddress had the
2817 value of $0, $0 had the value of $1, etc). This bug was introduced by
2818 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
282038. Improved the line breaking for long SMTP error messages from ACLs.
2821 Previously, if there was no break point between 40 and 75 characters, Exim
2822 left the rest of the message alone. Two changes have been made: (a) I've
2823 reduced the minimum length to 35 characters; (b) if it can't find a break
2824 point between 35 and 75 characters, it looks ahead and uses the first one
2825 that it finds. This may give the occasional overlong line, but at least the
2826 remaining text gets split now.
282839. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2829 file descriptors might be low, and that setting 1000 would always raise it.
2830 It turns out that in some environments, the limit is already over 1000 and
2831 that lowering it causes trouble. So now Exim takes care not to decrease it.
283340. When delivering a message, the value of $return_path is set to $sender_
2834 address at the start of routing (routers may change the value). By an
2835 oversight, this default was not being set up when an address was tested by
2836 -bt or -bv, which affected the outcome if any router or filter referred to
2837 $return_path.
283941. The idea of the "warn" ACL verb is that it adds a header or writes to the
2840 log only when "message" or "log_message" are set. However, if one of the
2841 conditions was an address verification, or a call to a nested ACL, the
2842 messages generated by the underlying test were being passed through. This
2843 no longer happens. The underlying message is available in $acl_verify_
2844 message for both "message" and "log_message" expansions, so it can be
2845 passed through if needed.
284742. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2848 new expansion $bh_ to give the encoded byte string without charset
2849 translation. Translation happens only if iconv() is available; HAVE_ICONV
2850 indicates this at build time. HEADERS_CHARSET gives the charset to
2851 translate to; headers_charset can change it in the configuration, and
2852 "headers charset" can change it in an individual filter file.
285443. Now that we have a default RFC 2047 charset (see above), the code in Exim
2855 that creates RFC 2047 encoded "words" labels them as that charset instead
2856 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2857 expansion operator; (ii) when Exim creates a From: line for a local
2858 message; (iii) when a header line is rewritten to include a "phrase" part.
286044. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2861 buggy, causing it to skip the first lines of messages whose message ID
2862 ended in 'D'. This would not have bitten before Exim release 4.14, because
2863 message IDs were unlikely to end in 'D' before then. The effect was to have
2864 incorrect size information for certain domains.
286645. #include "config.h" was missing at the start of the crypt16.c module. This
2867 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2868 noticed.
287046. If there was a timeout during a "random" callout check, Exim treated it as
2871 a failure of the random address, and carried on sending RSET and the real
2872 address. If the delay was just some slowness somewhere, the response to the
2873 original RCPT would be taken as a response to RSET and so on, causing
2874 mayhem of various kinds.
287647. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2877 when I implemented it. It didn't allow for the fact that some option values
2878 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2879 the right test for positive values.
288148. Domain names in DNS records are case-independent. Exim always looks them up
2882 in lower case. Some resolvers return domain names in exactly the case they
2883 appear in the zone file, that is, they may contain uppercase letters. Not
2884 all resolvers do this - some return always lower case. Exim was treating a
2885 change of case by a resolver as a change of domain, similar to a widening
2886 of a domain abbreviation. This triggered its re-routing code and so it was
2887 trying to route what was effectively the same domain again. This normally
2888 caused routing to fail (because the router wouldn't handle the domain
2889 twice). Now Exim checks for this case specially, and just changes the
2890 casing of the domain that it ultimately uses when it transmits the message
2891 envelope.
289349. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2894 module.
289650. If a filter generated a file delivery with a non-absolute name (possible if
2897 no home directory exists for the router), the forbid_file option was not
2898 forbidding it.
290051. Added '&' feature to dnslists, to provide bit mask matching in addition to
2901 the existing equality matching.
290352. Exim was using ints instead of ino_t variables in some places where it was
2904 dealing with inode numbers.
290653. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2907 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2908 called TMPDIR, and if it finds it is different, it changes its value.
291054. The smtp_printf() function is now made available to local_scan() so
2911 additional output lines can be written before returning. There is also an
2912 smtp_fflush() function to enable the detection of a dropped connection.
2913 The variables smtp_input and smtp_batched_input are exported to
2914 local_scan().
291655. Changed the default runtime configuration: the message "Unknown user"
2917 has been removed from the ACL, and instead placed on the localuser router,
2918 using the cannot_route_message feature. This means that any verification
2919 failures that generate their own messages won't get overridden. Similarly,
2920 the "Unrouteable address" message that was in the ACL for unverifiable
2921 relay addresses has also been removed.
292356. Added hosts_avoid_esmtp to the smtp transport.
292557. The exicyclog script was not checking for the esoteric option
2926 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2927 will work only if exicyclog is run under the appropriate euid.
292958. Following a discussion on the list, the rules by which Exim recognises line
2930 endings on incoming messages have been changed. The -dropcr and drop_cr
2931 options are now no-ops, retained only for backwards compatibility. The
2932 following line terminators are recognized: LF CRLF CR. However, special
2933 processing applies to CR:
2935 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2936 nor a local message in the state where . is a terminator.
2938 (ii) If a bare CR is encountered in a header line, an extra space is added
2939 after the line terminator so as not to end the header. The reasoning
2940 behind this is that bare CRs in header lines are most likely either
2941 to be mistakes, or people trying to play silly games.
294359. The size of a message, as listed by "-bp" or in the Exim monitor window,
2944 was being incorrectly given as 18 bytes larger than it should have been.
2945 This is a VOB (very old bug).
294760. This may never have affected anything current, but just in case it has:
2948 When the local host is found other than at the start of a list of hosts,
2949 the local host, those with the same MX, and any that follow, are discarded.
2950 When the list in question was part of a longer list of hosts, the following
2951 hosts (not currently being processed) were also being discarded. This no
2952 longer happens. I'm not sure if this situation could ever has previously
2953 arisen.
295561. Added the "/MX" feature to lists of hosts in the manualroute and query
2956 program routers.
295862. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2959 header. This is something that is recommended in a new Internet Draft, and
2960 is something that is documented as being done by Sendmail. There are two
2961 possible values. For messages generated by the autoreply transport, Exim
2962 adds:
2964 Auto-Submitted: auto-replied
2966 whereas for all other generated messages (e.g. bounces) it adds
2968 Auto-Submitted: auto-generated
297063. The "personal" condition in filters now includes a test for the
2971 Auto-Submitted: header. If it contains the string "auto-" the message it
2972 not considered personal.
297464. Added rcpt_include_affixes as a generic transport option.
297665. Added queue_only_override (default true).
297866. Added the syslog_duplication option.
298067. If what should have been the first header line of a message consisted of
2981 a space followed by a colon, Exim was mis-interpreting it as a header line.
2982 It isn't of course - it is syntactically invalid and should therefore be
2983 treated as the start of the message body. The misbehaviour could have
2984 caused a number of strange effects, including loss of data in subsequent
2985 header lines, and spool format errors.
298768. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2988 client host had authenticated. This control can now be exercised by an ACL
2989 for more flexibility.
299169. By default, callouts do not happen when testing with -bh. There is now a
2992 variant, -bhc, which does actually run the callout code, including
2993 consulting and updating the callout cache.
299570. Added support for saslauthd authentication, courtesy of Alexander
2996 Sabourenkov.
299871. If statvfs() failed on the spool or log directories while checking their
2999 size for availability, Exim confusingly gave the error "space shortage".
3000 Furthermore, in debugging mode it crashed with a floating point exception.
3001 These checks are done if check_{spool,log}_{space,inodes} are set, and when
3002 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
3003 serious problem, Exim now writes to the main and panic logs when this
3004 happens, with details of the failure. It then refuses to accept the
3005 incoming message, giving the message "spool directory problem" or "log
3006 directory problem" with a 421 code for SMTP messages.
300872. When Exim is about to re-exec itself, it ensures that the file descriptors
3009 0, 1, and 2 exist, because some OS complain for execs without them (see
3010 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
3011 descriptors. However, the code omitted to check that the open succeeded,
3012 causing mysterious errors if for some reason the permissions on /dev/null
3013 got screwed. Now Exim writes a message to the main and panic logs, and
3014 bombs out if it can't open /dev/null.
301673. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
3017 interact so that it is all more flexible. It is supposed to remain
3018 backwards compatible. Also added extra_local_interfaces.
302074. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
3021 to bomb out with an assertion failure - to the client this appears as a
3022 connection drop. This problem occurs in the part of the code that was taken
3023 from the Samba project. Fortunately, the assertion is in a very simple
3024 function, so I have fixed this by reproducing the function inline in the
3025 one place where it is called, and arranging for authentication to fail
3026 instead of killing the process with assert().
302875. The SPA client code was not working when the server requested OEM rather
3029 than Unicode encoding.
303176. Added code to make require_files with a specific uid setting more usable in
3032 the case where statting the file as root fails - usually a non-root-mounted
3033 NFS file system. When this happens and the failure is EACCES, Exim now
3034 forks a subprocess and does the per-uid checking as the relevant uid.
303677. Added process_log_path.
303878. If log_file_path was not explicitly set, a setting of check_log_space or
3039 check_log_inodes was ignored.
304179. If a space check for the spool or log partitions fails, the incident is now
3042 logged. Of course, in the latter case the data may get lost...
304480. Added the %p formatting code to string_format() so that it can be used to
3045 print addresses in debug_print(). Adjusted all the address printing in the
3046 debugging in store.c to use %p rather than %d.
304881. There was a concern that a line of code in smtp_in.c could overflow a
3049 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
3050 initially expressed, the concern was not well-founded, because trailing
3051 spaces are removed early. However, if the trailing spaces were followed by
3052 a NULL, they did not get removed, so the overflow was possible. Two fixes
3053 were applied:
3055 (a) I re-wrote the offending code in a cleaner fashion.
3056 (b) If an incoming SMTP command contains a NULL character, it is rejected
3057 as invalid.
305982. When Exim changes uid/gid to the Exim user at daemon start time, it now
3060 runs initgroups(), so that if the Exim user is in any additional groups,
3061 they will be used during message reception.
3064Exim version 4.20
3067The change log for 4.20 and earlier releases has been archived.