Install Tony's patch for $message_linecount.
[exim.git] / doc / doc-txt / ChangeLog
2e0c1448 1$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.127 2005/04/27 13:29:32 ph10 Exp $
3Change log file for Exim from version 4.21
bbe902f0 6
7Exim version 4.51
10TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
11 doc/experimental-spec.txt for details. (
2f079f46 13TK/02 Fix ACL "control" statement not being available in MIME ACL.
15TK/03 Fix ACL "regex" condition not being available in MIME ACL.
17PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
18 to test Sieve filters that use "vacation".
20PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
21 that changes the way the GnuTLS parameters are stored in the cache file.
22 The new format can be generated externally. For backward compatibility,
23 if the data in the cache doesn't make sense, Exim assumes it has read an
24 old-format file, and it generates new data and writes a new file. This
25 means that you can't go back to an older release without removing the
26 file.
28PH/03 A redirect router that has both "unseen" and "one_time" set does not
29 work if there are any delivery delays because "one_time" forces the
30 parent to be marked "delivered", so its unseen clone is never tried
31 again. For this reason, Exim now forbids the simultaneous setting of
32 these two options.
34PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
35 redirected to themselves ("homonym" addresses). Read the long ChangeLog
36 entry if you want to know the details. The fix, however, neglected to
37 consider the case when local delivery batching is involved. The test for
38 "previously delivered" was not happening when checking to see if an
39 address could be batched with a previous (undelivered) one; under
40 certain circumstances this could lead to multiple deliveries to the same
c2c19e9d 41 address.
43PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
44 in its include files, and this causes problems building Exim.
46PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
47 header_syntax) but Exim was just ignoring anything given after a slash.
48 In particular, this caused confusion with an attempt to use "verify =
49 reverse_host_lookup/defer_ok". An error is now given when options are
50 supplied for verify items that do not have them. (Maybe reverse_host_
51 lookup should have a defer_ok option, but that's a different point.)
53PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
54 defined by RFC 821) to 2048, because there were problems with some AUTH
55 commands, and RFC 1869 says the size should be increased for extended
56 SMTP commands that take arguments.
58PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
59 Finch).
61PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
62 "unknown" error; now it says that the functionality isn't in the binary.
8d67ada3 63
64PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
65 an address' error message when a string expansion fails (syntax or
66 whatever). Otherwise not only does the password appear in the log, it may
67 also be put in a bounce message.
69PH/11 Installed exipick version 20050225.0 from John Jetmore.
71PH/12 If the last host in a fallback_hosts list was multihomed, only the first
72 of its addresses was ever tried. (Bugzilla bug #2.)
74PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
75 the result incorrectly in the debug output. (It correctly added a newline
76 to what was transported.)
78TF/01 Added $received_time.
80PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
81 commented out examples of how to interface to a virus scanner and to
82 SpamAssassin. Also added commented examples of av_scanner and
83 spamd_address settings.
85PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
86 and controls are allowed in which ACLs. There were a couple of minor
87 errors. Some of the entries in the conditions table (which is a table of
88 where they are NOT allowed) were getting very unwieldy; rewrote them as a
89 negation of where the condition IS allowed.
91PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
93PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
94 header file does not have a version number, so I've had to invent a new
95 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
96 API. The code is untested by me (my Linux distribution still has 0.3.2 of
97 radiusclient), but it was contributed by a Radius user.
99PH/18 Installed Lars Mainka's patch for the support of CRL collections in
100 files or directories, for OpenSSL.
102PH/19 When an Exim process that is running as root has to create an Exim log
103 file, it does so in a subprocess that runs as exim:exim so as to get the
104 ownership right at creation (otherwise, other Exim processes might see
105 the file with the wrong ownership). There was no test for failure of this
106 fork() call, which would lead to the process getting stuck as it waited
107 for a non-existent subprocess. Forks do occasionally fail when resources
108 run out. I reviewed all the other calls to fork(); they all seem to check
109 for failure.
111PH/20 When checking for unexpected SMTP input at connect time (before writing
112 the banner), Exim was not dealing correctly with a non-positive return
113 from the read() function. If the client had disconnected by this time,
114 the result was a log entry for a synchronization error with an empty
115 string after "input=" when read() returned zero. If read() returned -1
116 (an event I could not check), uninitialized data bytes were printed.
117 There were reports of junk text (parts of files, etc) appearing after
118 "input=".
120PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
122PH/22 Added support for macro redefinition, and (re)definition in between
123 driver and ACL definitions.
125PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
126 forgetting to use the resulting value; it was using the unexpanded value.
128PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
129 hadn't been configured. The fix is from Juergen Kreileder, who
130 understands it better than I do:
132 "Here's what I see happening with three configured cyrus_sasl
133 authenticators configured (plain, login, cram-md5):
135 On startup auth_cyrus_sasl_init() gets called for each of these.
136 This means three calls to sasl_listmech() without a specified mech_list.
137 => SASL tests which mechs of all available mechs actually work
138 => three warnings about OTP not working
139 => the returned list contains: plain, login, cram-md5, digest-md5, ...
141 With the patch, sasl_listmech() also gets called three times. But now
142 SASL's mech_list option is set to the server_mech specified in the the
143 authenticator. Or in other words, the answer from sasl_listmech()
144 gets limited to just the mech you're testing for (which is different
145 for each call.)
146 => the return list contains just 'plain' or 'login', 'cram-md5' or
147 nothing depending on the value of ob->server_mech.
149 I've just tested the patch: Authentication still works fine,
150 unavailable mechs specified in the exim configuration are still
151 caught, and the auth.log warnings about OTP are gone."
153PH/25 When debugging is enabled, the contents of the command line are added
154 to the debugging output, even when log_selector=+arguments is not
155 specified.
157PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
158 answer is "GNU", and only if the return is "GNU/something" is the answer
159 "Linux".
161PH/27 $acl_verify_message is now set immediately after the failure of a
162 verification in an ACL, and so is available in subsequent modifiers. In
163 particular, the message can be preserved by coding like this:
165 warn !verify = sender
166 set acl_m0 = $acl_verify_message
168 Previously, $acl_verify_message was set only while expanding "message"
169 and "log_message" when a very denied access.
171PH/28 Modified OS/os.c-Linux with
173 -#ifndef OS_LOAD_AVERAGE
174 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
176 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
177 nomenclature these days.)
179PH/29 Installed patch from the Sieve maintainer that adds the options
180 sieve_useraddress and sieve_subaddress to the redirect router.
182PH/30 In these circumstances:
183 . Two addresses routed to the same list of hosts;
184 . First host does not offer TLS;
185 . First host accepts first address;
186 . First host gives temporary error to second address;
187 . Second host offers TLS and a TLS session is established;
188 . Second host accepts second address.
189 Exim incorrectly logged both deliveries with the TLS parameters (cipher
190 and peerdn, if requested) that were in fact used only for the second
191 address.
7e8bec7a 192
193PH/31 When doing a callout as part of verifying an address, Exim was not paying
194 attention to any local part prefix or suffix that was matched by the
195 router that accepted the address. It now behaves in the same way as it
196 does for delivery: the affixes are removed from the local part unless
197 rcpt_include_affixes is set on the transport.
199PH/32 Add the sender address, as F=<...>, to the log line when logging a
200 timeout during the DATA phase of an incoming message.
202PH/33 Sieve envelope tests were broken for match types other than :is. I have
203 applied a patch sanctioned by the Sieve maintainer.
c688b954 204
205PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
206 the uid or gid is negative. A case of a negative gid caused this to be
207 noticed. The fix allows for either to be negative.
209PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
210 clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
211 overlooked.
213PH/36 The change PH/12 above was broken. Fixed it.
215PH/37 Exim used to check for duplicate addresses in the middle of routing, on
216 the grounds that routing the same address twice would always produce the
217 same answer. This might have been true once, but it is certainly no
218 longer true now. Routing a child address may depend on the previous
219 routing that produced that child. Some complicated redirection strategies
220 went wrong when messages had multiple recipients, and made Exim's
221 behaviour dependent on the order in which the addresses were given.
223 I have moved the duplicate checking until after the routing is complete.
224 Exim scans the addresses that are assigned to local and remote
225 transports, and removes any duplicates. This means that more work will be
226 done, as duplicates will always all be routed, but duplicates are
227 presumably rare, so I don't expect this is of any significance.
229 For deliveries to pipes, files, and autoreplies, the duplicate checking
230 still happens during the routing process, since they are not going to be
231 routed further.
233PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
234 It corrects a timeout issue with spamd. This is Ian's comment: "The
235 background is that sometimes spamd either never reads data from a
236 connection it has accepted, or it never writes response data. The exiscan
237 spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
238 blindly assumes that writes won't block so it may never time out."
240PH/39 Allow G after quota size as well as K and M.
242PH/40 The value set for $authenticated_id in an authenticator may not contain
243 binary zeroes or newlines because the value is written to log lines and
244 to spool files. There was no check on this. Now the value is run through
245 the string_printing() function so that such characters are converted to
246 printable escape sequences.
248PH/41 $message_linecount is a new variable that contains the total number of
249 lines in the message. Compare $body_linecount, which is the count for the
250 body only.
7982096b 252
253A note about Exim versions 4.44 and 4.50
256Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
257changes of various kinds. As a consequence, a big documentation update was
258needed. This delayed the release for rather longer than seemed good, especially
259in the light of a couple of (minor) security issues. Therefore, the changes
260that fixed bugs were backported into 4.43, to create a 4.44 maintenance
261release. So 4.44 and 4.50 are in effect two different branches that both start
262from 4.43.
264I have left the 4.50 change log unchanged; it contains all the changes since
2654.43. The change log for 4.44 is below; many of its items are identical to
266those for 4.50. This seems to be the most sensible way to preserve the
267historical information.
f7b63901 270Exim version 4.50
273 1. Minor wording change to the doc/README.SIEVE file.
139059f6 275 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
5fe762f6 276 computation of the current number of files was incorrect.
495ae4b0 277
278 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
279 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
280 place.
282 4. Give more explanation in the error message when the command for a transport
283 filter fails to execute.
285 5. There are several places where Exim runs a non-Exim command in a
286 subprocess. The SIGUSR1 signal should be disabled for these processes. This
287 was being done only for the command run by the queryprogram router. It is
288 now done for all such subprocesses. The other cases are: ${run, transport
289 filters, and the commands run by the lmtp and pipe transports.
291 6. Added CONFIGURE_GROUP build-time option.
293 7. Some older OS have a limit of 256 on the maximum number of file
294 descriptors. Exim was using setrlimit() to set 1000 as a large value
295 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
296 systems. I've change it so that if it can't get 1000, it tries for 256.
35edf2ff 297
298 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
299 was an oversight, and furthermore, ever since the addition of extra
300 controls (e.g. 4.43/32), the checks on when to allow different forms of
301 "control" were broken. There should now be diagnostics for all cases when a
302 control that does not make sense is encountered.
304 9. Added the /retain_sender option to "control=submission".
30610. $recipients is now available in the predata ACL (oversight).
30811. Tidy the search cache before the fork to do a delivery from a message
309 received from the command line. Otherwise the child will trigger a lookup
310 failure and thereby defer the delivery if it tries to use (for example) a
311 cached ldap connection that the parent has called unbind on.
31312. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
314 of $address_data from the recipient verification was clobbered by the
315 sender verification.
31713. The value of address_data from a sender verification is now available in
318 $sender_address_data in subsequent conditions in the ACL statement.
32014. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
32215. Added a new option "connect=<time>" to callout options, to set a different
323 connection timeout.
32516. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
326 was its contents. (It was OK if the option was not defined at all.)
32817. A "Completed" log line is now written for messages that are removed from
329 the spool by the -Mrm option.
33118. New variables $sender_verify_failure and $recipient_verify_failure contain
332 information about exactly what failed.
33419. Added -dd to debug only the daemon process.
33620. Incorporated Michael Haardt's patch to ldap.c for improving the way it
337 handles timeouts, both on the server side and network timeouts. Renamed the
338 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
34021. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
341 It is now set to "smtps".
34322. $host_address is now set to the target address during the checking of
344 ignore_target_hosts.
34623. When checking ignore_target_hosts for an ipliteral router, no host name was
347 being passed; this would have caused $sender_host_name to have been used if
348 matching the list had actually called for a host name (not very likely,
349 since this list is usually IP addresses). A host name is now passed as
350 "[x.x.x.x]".
35224. Changed the calls that set up the SIGCHLD handler in the daemon to use the
353 code that specifies a non-restarting handler (typically sigaction() in
354 modern systems) in an attempt to fix a rare and obscure crash bug.
35625. Narrowed the window for a race in the daemon that could cause it to ignore
357 SIGCHLD signals. This is not a major problem, because they are used only to
358 wake it up if nothing else does.
36026. A malformed maildirsize file could cause Exim to calculate negative values
361 for the mailbox size or file count. Odd effects could occur as a result.
362 The maildirsize information is now recalculated if the size or filecount
363 end up negative.
36527. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
366 support for a long time. Removed HAVE_SYS_VFS_H.
36828. Installed the latest version of exipick from John Jetmore.
37029. In an address list, if the pattern was not a regular expression, an empty
371 subject address (from a bounce message) matched only if the pattern was an
372 empty string. Non-empty patterns were not even tested. This was the wrong
373 because it is perfectly reasonable to use an empty address as part of a
374 database query. An empty address is now tested by patterns that are
375 lookups. However, all the other forms of pattern expect the subject to
376 contain a local part and a domain, and therefore, for them, an empty
377 address still always fails if the pattern is not itself empty.
37930. Exim went into a mad DNS loop when attempting to do a callout where the
380 host was specified on an smtp transport, and looking it up yielded more
381 than one IP address.
38331. Re-factored the code for checking spool and log partition space into a
384 function that finds that data and another that does the check. The former
385 is then used to implement four new variables: $spool_space, $log_space,
386 $spool_inodes, and $log_inodes.
38832. The RFC2047 encoding function was originally intended for short strings
389 such as real names; it was not keeping to the 75-character limit for
390 encoded words that the RFC imposes. It now respects the limit, and
391 generates multiple encoded words if necessary. To be on the safe side, I
392 have increased the buffer size for the ${rfc2047: expansion operator from
393 1024 to 2048 bytes.
39533. It is now permitted to omit both strings after an "if" condition; if the
396 condition is true, the result is "true". As before, when the second string
397 is omitted, a false condition yields an empty string. This makes it less
398 cumbersome to write custom ACL and router conditions.
40034. Failure to deliver a bounce message always caused it to be frozen, even if
401 there was an errors_to setting on the router. The errors_to setting is now
402 respected.
40435. If an IPv6 address is given for -bh or -bhc, it is now converted to the
405 canonical form (fully expanded) before being placed in
406 $sender_host_address.
40836. The table in the code that translates DNS record types into text (T_A to
409 "A" for instance) was missing entries for NS and CNAME. It is just possible
410 that this could have caused confusion if both these types were looked up
411 for the same domain, because the text type is used as part of Exim's
412 per-process caching. But the chance of anyone hitting this buglet seems
413 very small.
41537. The dnsdb lookup has been extended in a number of ways.
417 (1) There is a new type, "zns", which walks up the domain tree until it
418 finds some nameserver records. It should be used with care.
420 (2) There is a new type, "mxh", which is like "mx" except that it returns
421 just the host names, not the priorities.
423 (3) It is now possible to give a list of domains (or IP addresses) to be
424 looked up. The behaviour when one of the lookups defers can be
425 controlled by a keyword.
7bb56e1f 426
ea3bc19b 427 (4) It is now possible to specify the separator character for use when
7bb56e1f 428 multiple records are returned.
33397d19 429
43038. The dnslists ACL condition has been extended: it is now possible to supply
431 a list of IP addresses and/or domains to be looked up in a particular DNS
432 domain.
43439. Added log_selector=+queue_time_overall.
43640. When running the queue in the test harness, wait just a tad after forking a
437 delivery process, to get repeatability of debugging output.
43941. Include certificate and key file names in error message when GnuTLS fails
440 to set them up, because the GnuTLS error message doesn't include the name
441 of the failing file when there is a problem reading it.
44342. Allow both -bf and -bF in the same test run.
44543. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
44744. The "Exiscan patch" is now merged into the mainline Exim source.
44945. Sometimes the final signoff response after QUIT could fail to get
450 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
451 < 0 before doing a fflush(). This bug looks as though it goes back to the
452 introduction of TLS in release 3.20, but "sometimes" must have been rare
453 because the tests only now provoked it.
45546. Reset the locale to "C" after calling embedded Perl, in case it was changed
456 (this can affect the format of dates).
45847. exim_tidydb, when checking for the continued existence of a message for
459 which it has found a message-specific retry record, was not finding
460 messages that were in split spool directories. Consequently, it was
461 deleting retry records that should have stayed in existence.
46348. Steve fixed some bugs in eximstats.
46549. The SPA authentication driver was not abandoning authentication and moving
466 on to the next authenticator when an expansion was forced to fail,
467 contradicting the general specification for all authenticators. Instead it
468 was generating a temporary error. It now behaves as specified.
47050. The default ordering of permitted cipher suites for GnuTLS was pessimal
471 (the order specifies the preference for clients). The order is now AES256,
472 AES128, 3DES, ARCFOUR128.
47451. Small patch to Sieve code - explicitly set From: when generating an
475 autoreply.
47752. Exim crashed if a remote delivery caused a very long error message to be
478 recorded - for instance if somebody sent an entire SpamAssassin report back
479 as a large number of 550 error lines. This bug was coincidentally fixed by
480 increasing the size of one of Exim's internal buffers (big_buffer) that
481 happened as part of the Exiscan merge. However, to be on the safe side, I
482 have made the code more robust (and fixed the comments that describe what
483 is going on).
48553. Now that there can be additional text after "Completed" in log lines (if
486 the queue_time_overall log selector is set), a one-byte patch to exigrep
487 was needed to allow it to recognize "Completed" as not the last thing in
488 the line.
49054. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
491 patch that reportedly fixes this has been added. I am not expert enough to
492 create a test for it. This is what the patch creator wrote:
494 "I found a little strange behaviour of ldap code when working with
495 Windows 2003 AD Domain, where users was placed in more than one
496 Organization Units. When I tried to give exim partial DN, the exit code
497 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
498 But simultaneously result of request was absolutely normal ldap result,
499 so I produce this patch..."
501 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
502 REFERENCE, so I have modified the code to exclude the patch when that macro
503 is not defined.
50555. Some experimental protocols are using DNS PTR records for new purposes. The
506 keys for these records are domain names, not reversed IP addresses. The
507 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
508 leaves it alone. Component reversal etc. now happens only for IP addresses.
ea3a6f44 509 CAN-2005-0021
7102e136 510
51156. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
51357. Double the size of the debug message buffer (to 2048) so that more of very
514 long debug lines gets shown.
51658. The exicyclog utility now does better if the number of log files to keep
517 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
51959. Two changes related to the smtp_active_hostname option:
521 (1) $smtp_active_hostname is now available as a variable.
522 (2) The default for smtp_banner uses $smtp_active_hostname instead
523 of $primary_hostname.
52560. The host_aton() function is supposed to be passed a string that is known
526 to be a valid IP address. However, in the case of IPv6 addresses, it was
527 not checking this. This is a hostage to fortune. Exim now panics and dies
528 if the condition is not met. A case was found where this could be provoked
529 from a dnsdb PTR lookup with an IPv6 address that had more than 8
530 components; fortuitously, this particular loophole had already been fixed
531 by change 4.50/55 above.
533 If there are any other similar loopholes, the new check in host_aton()
534 itself should stop them being exploited. The report I received stated that
535 data on the command line could provoke the exploit when Exim was running as
536 exim, but did not say which command line option was involved. All I could
537 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
538 running as the user.
ea3a6f44 539 CAN-2005-0021
54161. There was a buffer overflow vulnerability in the SPA authentication code
542 (which came originally from the Samba project). I have added a test to the
543 spa_base64_to_bits() function which I hope fixes it.
ea3a6f44 544 CAN-2005-0022
b975ba52 545
54662. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
547 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
54963. The daemon start-up calls getloadavg() while still root for those OS that
550 need the first call to be done as root, but it missed one case: when
551 deliver_queue_load_max is set with deliver_drop_privilege. This is
552 necessary for the benefit of the queue runner, because there is no re-exec
553 when deliver_drop_privilege is set.
55564. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
556 This has been fixed.
55865. Caching of lookup data for "hosts =" ACL conditions, when a named host list
559 was in use, was not putting the data itself into the right store pool;
560 consequently, it could be overwritten for a subsequent message in the same
561 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
562 the caching.)
56466. Added hosts_max_try_hardlimit to the smtp transport, default 50.
56667. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
567 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
568 the function were treating the return as a boolean value, which happened to
569 work because 0=false and not-0=true, but is not correct code.
57168. The host_aton() function was not handling scoped IPv6 addresses (those
572 with, for example, "%eth0" on the end) correctly.
57469. Fixed some compiler warnings in acl.c for the bitmaps specified with
575 negated items (that is, ~something) in unsigned ints. Some compilers
576 apparently mutter when there is no cast.
57870. If an address verification called from an ACL failed, and did not produce a
579 user-specific message (i.e. there was only a "system" message), nothing was
580 put in $acl_verify_message. In this situation, it now puts the system
581 message there.
58371. Change 4.23/11 added synchronization checking at the start of an SMTP
584 session; change 4.31/43 added the unwanted input to the log line - except
585 that it did not do this in the start of session case. It now does.
58772. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
588 This is wrong and can cause the other end to generate a synchronization
589 error if it is another Exim or anything else that does the synchronization
590 check. A QUIT command is no longer sent after a timeout.
59273. $host_lookup_deferred has been added, to make it easier to detect DEFERs
593 during host lookups.
59574. The defer_ok option of callout verification was not working if it was used
596 when verifying addresses in header lines, that is, for this case:
598 verify = header_sender/callout=defer_ok
60075. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
601 those file descriptors could be used for SMTP connections. If anything
602 wrote to stderr (the example that came up was "warn" in embedded Perl), it
603 could be sent to the SMTP client, causing chaos. The daemon now opens
604 stdin, stdout, and stderr to /dev/null when it puts itself into the
605 background.
60776. Arrange for output from Perl's "warn" command to be written to Exim's main
608 log by default. The user can override this with suitable Perl magic.
61077. The use of log_message on a "discard" ACL verb, which is supposed to add to
611 the log message when discard triggers, was not working for the DATA ACL or
612 for the non-SMTP ACL.
61478. Error message wording change in sieve.c.
61679. If smtp_accept_max_per_host was set, the number of connections could be
617 restricted to fewer than expected, because the daemon was trying to set up
618 a new connection before checking whether the processes handling previous
619 connections had finished. The check for completed processes is now done
620 earlier. On busy systems, this bug wouldn't be noticed because something
621 else would have woken the daemon, and it would have reaped the completed
622 process earlier.
62480. If a message was submitted locally by a user whose login name contained one
625 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
626 It caused a spool format error. I have fixed the spool reading code. A
627 related problem was that the "from" clause in the Received: line became
628 illegal because of the space(s). It is now covered by ${quote_local_part.
63081. Included the latest eximstats from Steve (adds average sizes to HTML Top
631 tables).
63382. Updated OS/Makefile-AIX as per message from Mike Meredith.
63583. Patch from Sieve maintainer to fix unterminated string problem in
636 "vacation" handling.
63884. Some minor changes to the Linux configuration files to help with other
639 OS variants using glibc.
64185. One more patch for Sieve to update vacation handling to latest spec.
495ae4b0 643
645See the note above about the 4.44 and 4.50 releases.
649Exim version 4.44
652 1. Change 4.43/35 introduced a bug that caused file counts to be
653 incorrectly computed when quota_filecount was set in an appendfile
654 transport
656 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
657 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
658 place.
660 3. Give more explanation in the error message when the command for a transport
661 filter fails to execute.
663 4. There are several places where Exim runs a non-Exim command in a
664 subprocess. The SIGUSR1 signal should be disabled for these processes. This
665 was being done only for the command run by the queryprogram router. It is
666 now done for all such subprocesses. The other cases are: ${run, transport
667 filters, and the commands run by the lmtp and pipe transports.
669 5. Some older OS have a limit of 256 on the maximum number of file
670 descriptors. Exim was using setrlimit() to set 1000 as a large value
671 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
672 systems. I've change it so that if it can't get 1000, it tries for 256.
674 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
675 was an oversight, and furthermore, ever since the addition of extra
676 controls (e.g. 4.43/32), the checks on when to allow different forms of
677 "control" were broken. There should now be diagnostics for all cases when a
678 control that does not make sense is encountered.
680 7. $recipients is now available in the predata ACL (oversight).
682 8. Tidy the search cache before the fork to do a delivery from a message
683 received from the command line. Otherwise the child will trigger a lookup
684 failure and thereby defer the delivery if it tries to use (for example) a
685 cached ldap connection that the parent has called unbind on.
687 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
688 of $address_data from the recipient verification was clobbered by the
689 sender verification.
69110. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
692 was its contents. (It was OK if the option was not defined at all.)
69411. A "Completed" log line is now written for messages that are removed from
695 the spool by the -Mrm option.
69712. $host_address is now set to the target address during the checking of
698 ignore_target_hosts.
70013. When checking ignore_target_hosts for an ipliteral router, no host name was
701 being passed; this would have caused $sender_host_name to have been used if
702 matching the list had actually called for a host name (not very likely,
703 since this list is usually IP addresses). A host name is now passed as
704 "[x.x.x.x]".
70614. Changed the calls that set up the SIGCHLD handler in the daemon to use the
707 code that specifies a non-restarting handler (typically sigaction() in
708 modern systems) in an attempt to fix a rare and obscure crash bug.
71015. Narrowed the window for a race in the daemon that could cause it to ignore
711 SIGCHLD signals. This is not a major problem, because they are used only to
712 wake it up if nothing else does.
71416. A malformed maildirsize file could cause Exim to calculate negative values
715 for the mailbox size or file count. Odd effects could occur as a result.
716 The maildirsize information is now recalculated if the size or filecount
717 end up negative.
71917. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
720 support for a long time. Removed HAVE_SYS_VFS_H.
ea3a6f44 72218. Updated exipick to current release from John Jetmore.
72419. Allow an empty sender to be matched against a lookup in an address list.
725 Previously the only cases considered were a regular expression, or an
726 empty pattern.
72820. Exim went into a mad DNS lookup loop when doing a callout where the
729 host was specified on the transport, if the DNS lookup yielded more than
730 one IP address.
73221. The RFC2047 encoding function was originally intended for short strings
733 such as real names; it was not keeping to the 75-character limit for
734 encoded words that the RFC imposes. It now respects the limit, and
735 generates multiple encoded words if necessary. To be on the safe side, I
736 have increased the buffer size for the ${rfc2047: expansion operator from
737 1024 to 2048 bytes.
bbe902f0 738
73922. Failure to deliver a bounce message always caused it to be frozen, even if
740 there was an errors_to setting on the router. The errors_to setting is now
741 respected.
74323. If an IPv6 address is given for -bh or -bhc, it is now converted to the
744 canonical form (fully expanded) before being placed in
745 $sender_host_address.
74724. Updated eximstats to version 1.33
74925. Include certificate and key file names in error message when GnuTLS fails
750 to set them up, because the GnuTLS error message doesn't include the name
751 of the failing file when there is a problem reading it.
75326. Expand error message when OpenSSL has problems setting up cert/key files.
ea3a6f44 754 As per change 25.
bbe902f0 755
75627. Reset the locale to "C" after calling embedded Perl, in case it was changed
757 (this can affect the format of dates).
bbe902f0 758
75928. exim_tidydb, when checking for the continued existence of a message for
760 which it has found a message-specific retry record, was not finding
761 messages that were in split spool directories. Consequently, it was
762 deleting retry records that should have stayed in existence.
76429. eximstats updated to version 1.35
765 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
766 1.35 - bugfix such that pie charts by volume are generated correctly
76830. The SPA authentication driver was not abandoning authentication and moving
769 on to the next authenticator when an expansion was forced to fail,
770 contradicting the general specification for all authenticators. Instead it
771 was generating a temporary error. It now behaves as specified.
bbe902f0 772
77331. The default ordering of permitted cipher suites for GnuTLS was pessimal
774 (the order specifies the preference for clients). The order is now AES256,
775 AES128, 3DES, ARCFOUR128.
bbe902f0 776
77731. Small patch to Sieve code - explicitly set From: when generating an
778 autoreply.
bbe902f0 779
78032. Exim crashed if a remote delivery caused a very long error message to be
781 recorded - for instance if somebody sent an entire SpamAssassin report back
782 as a large number of 550 error lines. This bug was coincidentally fixed by
783 increasing the size of one of Exim's internal buffers (big_buffer) that
784 happened as part of the Exiscan merge. However, to be on the safe side, I
785 have made the code more robust (and fixed the comments that describe what
786 is going on).
bbe902f0 787
78833. Some experimental protocols are using DNS PTR records for new purposes. The
789 keys for these records are domain names, not reversed IP addresses. The
790 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
791 leaves it alone. Component reversal etc. now happens only for IP addresses.
792 CAN-2005-0021
79434. The host_aton() function is supposed to be passed a string that is known
795 to be a valid IP address. However, in the case of IPv6 addresses, it was
796 not checking this. This is a hostage to fortune. Exim now panics and dies
797 if the condition is not met. A case was found where this could be provoked
798 from a dnsdb PTR lookup with an IPv6 address that had more than 8
799 components; fortuitously, this particular loophole had already been fixed
800 by change 4.50/55 or 4.44/33 above.
802 If there are any other similar loopholes, the new check in host_aton()
803 itself should stop them being exploited. The report I received stated that
804 data on the command line could provoke the exploit when Exim was running as
805 exim, but did not say which command line option was involved. All I could
806 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
807 running as the user.
808 CAN-2005-0021
81035. There was a buffer overflow vulnerability in the SPA authentication code
811 (which came originally from the Samba project). I have added a test to the
812 spa_base64_to_bits() function which I hope fixes it.
813 CAN-2005-0022
81536. The daemon start-up calls getloadavg() while still root for those OS that
816 need the first call to be done as root, but it missed one case: when
817 deliver_queue_load_max is set with deliver_drop_privilege. This is
818 necessary for the benefit of the queue runner, because there is no re-exec
819 when deliver_drop_privilege is set.
bbe902f0 820
82137. Caching of lookup data for "hosts =" ACL conditions, when a named host list
822 was in use, was not putting the data itself into the right store pool;
823 consequently, it could be overwritten for a subsequent message in the same
824 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
825 the caching.)
bbe902f0 826
82738. Sometimes the final signoff response after QUIT could fail to get
828 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
829 < 0 before doing a fflush(). This bug looks as though it goes back to the
830 introduction of TLS in release 3.20, but "sometimes" must have been rare
831 because the tests only now provoked it.
834Exim version 4.43
837 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
838 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
839 Now it returns an integer. A number of calls were still expecting a T/F
840 return. Fortuitously, in all cases, the tests worked in OK situations,
841 which is the norm. However, things would have gone wrong on any write
842 failures on the smtp file descriptor. This function is used when sending
843 messages over SMTP and also when doing verify callouts.
845 2. When Exim is called to do synchronous delivery of a locally submitted
846 message (the -odf or -odi options), it no longer closes stderr before doing
847 the delivery.
849 3. Implemented the mua_wrapper option.
851 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
853 5. Implemented the functions header_remove(), header_testname(),
854 header_add_at_position(), and receive_remove_recipient(), and exported them
855 to local_scan().
857 6. If an ACL "warn" statement specified the addition of headers, Exim already
858 inserted X-ACL-Warn: at the start if there was no header name. However, it
859 was not making this test for the second and subsequent header lines if
860 there were newlines in the string. This meant that an invalid header could
861 be inserted if Exim was badly configured.
863 7. Allow an ACL "warn" statement to add header lines at the start or after all
864 the Received: headers, as well as at the end.
866 8. Added the rcpt_4xx retry error code.
868 9. Added postmaster_mailfrom=xxx to callout verification option.
87010. Added mailfrom=xxxx to the callout verification option, for verify=
871 header_sender only.
87311. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
874 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
87612. Inserted some casts to stop certain compilers warning when using pointer
877 differences as field lengths or precisions in printf-type calls (mostly
878 affecting debugging statements).
88013. Added optional readline() support for -be (dynamically loaded).
88214. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
883 same clock tick as a message's arrival, so that its received time was the
884 same as the "first fail" time on the retry record, and that message
885 remained on the queue past the ultimate address timeout, every queue runner
886 would try a delivery (because it was past the ultimate address timeout) but
887 after another failure, the ultimate address timeout, which should have then
888 bounced the address, did not kick in. This was a "< instead of <=" error;
889 in most cases the first failure would have been in the next clock tick
890 after the received time, and all would be well.
89215. The special items beginning with @ in domain lists (e.g. @mx_any) were not
893 being recognized when the domain list was tested by the match_domain
894 condition in an expansion string.
89616. Added the ${str2b64: operator.
89817. Exim was always calling setrlimit() to set a large limit for the number of
899 processes, without checking whether the existing limit was already
900 adequate. (It did check for the limit on file descriptors.) Furthermore,
901 errors from getrlimit() and setrlimit() were being ignored. Now they are
902 logged to the main and panic logs, but Exim does carry on, to try to do its
903 job under whatever limits there are.
90518. Imported PCRE 5.0.
90719. Trivial typo in log message " temporarily refused connection" (the leading
908 space).
91020. If the log selector return_path_on_delivery was set and an address was
911 redirected to /dev/null, the delivery process crashed because it assumed
912 that a return path would always be set for a "successful" delivery. In this
913 case, the whole delivery is bypassed as an optimization, and therefore no
914 return path is set.
91621. Internal re-arrangement: the function for sending a challenge and reading
917 a response while authentication was assuming a zero-terminated challenge
918 string. It's now changed to take a pointer and a length, to allow for
919 binary data in such strings.
92122. Added the cyrus_sasl authenticator (code supplied by MBM).
92323. Exim was not respecting finduser_retries when seeking the login of the
924 uid under which it was called; it was always trying 10 times. (The default
925 setting of finduser_retries is zero.) Also, it was sleeping after the final
926 failure, which is pointless.
92824. Implemented tls_on_connect_ports.
93025. Implemented acl_smtp_predata.
93226. If the domain in control=submission is set empty, Exim assumes that the
933 authenticated id is a complete email address when it generates From: or
934 Sender: header lines.
93627. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
937 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
938 chown and chgrp in /bin and hostname in /usr/bin.
94028. Exim was keeping the "process log" file open after each use, just as it
941 does for the main log. This opens the possibility of it remaining open for
942 long periods when the USR1 signal hits a daemon. Occasional processlog
943 errors were reported, that could have been caused by this. Anyway, it seems
944 much more sensible not to leave this file open at all, so that is what now
945 happens.
94729. The long-running daemon process does not normally write to the log once it
948 has entered its main loop, and it closes the log before doing so. This is
949 so that log files can straightforwardly be renamed and moved. However,
950 there are a couple of unusual error situations where the daemon does write
951 log entries, and I had neglected to close the log afterwards.
95330. The text of an SMTP error response that was received during a remote
954 delivery was being truncated at 512 bytes. This is too short for some of
955 the long messages that one sometimes sees. I've increased the limit to
956 1024.
95831. It is now possible to make retry rules that apply only when a message has a
959 specific sender, in particular, an empty sender.
96132. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
962 it possible to be selective about when SMTP synchronization is enforced.
96433. Added "control = caseful_local_part" and "control = "caselower_local_part".
96632. Implemented hosts_connection_nolog.
96833. Added an ACL for QUIT.
97034. Setting "delay_warning=" to disable warnings was not working; it gave a
971 syntax error.
97335. Added mailbox_size and mailbox_filecount to appendfile.
97536. Added control = no_multiline_responses to ACLs.
97737. There was a bug in the logic of the code that waits for the clock to tick
978 in the case where the clock went backwards by a substantial amount such
979 that the microsecond fraction of "now" was more than the microsecond
980 fraction of "then" (but the whole seconds number was less).
98238. Added support for the libradius Radius client library this is found on
983 FreeBSD (previously only the radiusclient library was supported).
986Exim version 4.42
989 1. When certain lookups returned multiple values in the form name=value, the
990 quoting of the values was not always being done properly. Specifically:
991 (a) If the value started with a double quote, but contained no whitespace,
992 it was not quoted.
993 (b) If the value contained whitespace other than a space character (i.e.
994 tabs or newlines or carriage returns) it was not quoted.
995 This fix has been applied to the mysql and pgsql lookups by writing a
996 separate quoting function and calling it from the lookup code. The fix
997 should probably also be applied to nisplus, ibase and oracle lookups, but
998 since I cannot test any of those, I have not disturbed their existing code.
1000 2. A hit in the callout cache for a specific address caused a log line with no
1001 reason for rejecting RCPT. Now it says "Previous (cached) callout
1002 verification failure".
1004 3. There was an off-by-one bug in the queryprogram router. An over-long
1005 return line was truncated at 256 instead of 255 characters, thereby
1006 overflowing its buffer with the terminating zero. As well as fixing this, I
1007 have increased the buffer size to 1024 (and made a note to document this).
1009 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
1010 when Exim is waiting for an SMTP response from a remote server, Exim
1011 restarts its select() call on the socket, thereby resetting its timeout.
1012 This is not a problem when such interrupts are rare. Somebody set up a cron
1013 job to run exiwhat every 2 minutes, which is less than the normal select()
1014 timeout (5 or 10 minutes). This meant that the select() timeout never
1015 kicked in because it was always reset. I have fixed this by comparing the
1016 time when an interrupt arrives with the time at the start of the first call
1017 to select(). If more time than the timeout has elapsed, the interrupt is
1018 treated as a timeout.
1020 5. Some internal re-factoring in preparation for the addition of Sieve
1021 extensions (by MH). In particular, the "personal" test is moved to a
1022 separate function, and given an option for scanning Cc: and Bcc: (which is
1023 not set for Exim filters).
1025 6. When Exim created an email address using the login of the caller as the
1026 local part (e.g. when creating a From: or Sender: header line), it was not
1027 quoting the local part when it contained special characters such as @.
1029 7. Installed new OpenBSD configuration files.
1031 8. Reworded some messages for syntax errors in "and" and "or" conditions to
1032 try to make them clearer.
1034 9. Callout options, other than the timeout value, were being ignored when
1035 verifying sender addresses in header lines. For example, when using
1037 verify = header_sender/callout=no_cache
1039 the cache was (incorrectly) being used.
104110. Added a missing instance of ${EXE} to the exim_install script; this affects
1042 only the Cygwin environment.
104411. When return_path_on_delivery was set as a log selector, if different remote
1045 addresses in the same message used different return paths and parallel
1046 remote delivery occurred, the wrong values would sometimes be logged.
1047 (Whenever a remote delivery process finished, the return path value from
1048 the most recently started remote delivery process was logged.)
105012. RFC 3848 specifies standard names for the "with" phrase in Received: header
1051 lines when AUTH and/or TLS are in use. This is the "received protocol"
1052 field. Exim used to use "asmtp" for authenticated SMTP, without any
1053 indication (in the protocol name) for TLS use. Now it follows the RFC and
1054 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
1055 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
1056 names appear in log lines as well as in Received: header lines.
105813. Installed MH's patches for Sieve to add the "copy" and "vacation"
1059 extensions, and comparison tests, and to fix some bugs.
106114. Changes to the "personal" filter test:
1063 (1) The test was buggy in that it was just doing the equivalent of
1064 "contains" tests on header lines. For example, if a user's address was
1065 anne@some.where, the "personal" test would incorrectly be true for
1067 To: susanne@some.where
1069 This test is now done by extracting each address from the header in turn,
1070 and checking the entire address. Other tests that are part of "personal"
1071 are now done using regular expressions (for example, to check local parts
1072 of addresses in From: header lines).
1074 (2) The list of non-personal local parts in From: addresses has been
1075 extended to include "listserv", "majordomo", "*-request", and "owner-*",
1076 taken from the Sieve specification recommendations.
1078 (3) If the message contains any header line starting with "List-" it is
1079 treated as non-personal.
1081 (4) The test for "circular" in the Subject: header line has been removed
1082 because it now seems ill-conceived.
108415. Minor typos in src/EDITME comments corrected.
108616. Installed latest exipick from John Jetmore.
108817. If headers_add on a router specified a text string that was too long for
1089 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
1090 of string_sprintf() is now avoided.
109218. $message_body_size was not set (it was always zero) when running the DATA
1093 ACL and the local_scan() function.
109519. For the "mail" command in an Exim filter, no default was being set for
1096 the once_repeat time, causing a random time value to be used if "once" was
1097 specified. (If the value happened to be <= 0, no repeat happened.) The
1098 default is now 0s, meaning "never repeat". The "vacation" command was OK
1099 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
1100 (I found it when inspecting the code).
110220. There is now an overall timeout for performing a callout verification. It
1103 defaults to 4 times the callout timeout, which applies to individual SMTP
1104 commands during the callout. The overall timeout applies when there is more
1105 than one host that can be tried. The timeout is checked before trying the
1106 next host. This prevents very long delays if there are a large number of
1107 hosts and all are timing out (e.g. when the network connections are timing
1108 out). The value of the overall timeout can be changed by specifying an
1109 additional sub-option for "callout", called "maxwait". For example:
1111 verify = sender/callout=5s,maxwait=20s
111321. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
1114 to the end before writing, but this should make it even safer).
111622. Exim was forgetting that it had advertised PIPELINING for the second and
1117 subsequent messages on an SMTP connection. It was also not resetting its
1118 memory on STARTTLS and an internal HELO.
112023. When Exim logs an SMTP synchronization error within a session, it now
1121 records whether PIPELINING has been advertised or not.
112324. Added 3 instances of "(long int)" casts to time_t variables that were being
1124 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
1125 rather than long int.
112725. Installed the latest Cygwin configuration files from the Cygwin maintainer.
112926. Added the never_mail option to autoreply.
1132Exim version 4.41
1135 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
1136 crash if the getsockname() call failed; this can happen if a connection is
1137 closed very soon after it is established. The problem was simply in the
1138 order in which certain operations were done, causing Exim to try to write
1139 to the SMTP stream before it had set up the file descriptor. The bug has
1140 been fixed by making things happen in the correct order.
1143Exim version 4.40
1146 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
1147 before the connection was closed, thus losing the rejection response.
1149 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
1150 some early Solaris releases, but causes trouble in current releases where
1151 socklen_t is defined.
1153 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
1154 always exist.
1156 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
1157 configured.
1159 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
1160 that releasing the top of it at the end releases what was used for sub-
1161 expansions (unless the block got too big). However, discard this block if
1162 the first thing is a variable or header, so that we can use its block when
1163 it is dynamic (useful for very large $message_headers, for example).
1165 6. Lookups now cache *every* query, not just the most recent. A new, separate
1166 store pool is used for this. It can be recovered when all lookup caches are
1167 flushed. Lookups now release memory at the end of their result strings.
1168 This has involved some general refactoring of the lookup sources.
1170 7. Some code has been added to the store_xxx() functions to reduce the amount
1171 of flapping under certain conditions.
1173 8. log_incoming_interface used to affect only the <= reception log lines. Now
1174 it causes the local interface and port to be added to several more SMTP log
1175 lines, for example "SMTP connection from", and rejection lines.
1177 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
117910. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
118111. If $host_data was set by virtue of a hosts lookup in an ACL, its value
1182 could be overwritten at the end of the current message (or the start of a
1183 new message if it was set in a HELO ACL). The value is now preserved for
1184 the duration of the SMTP connection.
118612. If a transport had a headers_rewrite setting, and a matching header line
1187 contained an unqualified address, that address was qualified, even if it
1188 did not match any rewriting rules. The underlying bug was that the values
1189 of the flags that permit the existence of unqualified sender and recipient
1190 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
1191 non-local messages, and by -bnq for local messages) were not being
1192 preserved with the message after it was received.
119413. When Exim was logging an SMTP synchronization error, it could sometimes log
1195 "next input=" as part of the text comprising the host identity instead of
1196 the correct text. The code was using the same buffer for two different
1197 strings. However, depending on which order the printing function evaluated
1198 its arguments, the bug did not always show up. Under Linux, for example, my
1199 test suite worked just fine.
120114. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
1202 doesn't work with some older versions of Perl. It has been changed to "my",
1203 which in any case is probably the better facility to use.
120515. A really picky compiler found some instances of statements for creating
1206 error messages that either had too many or two few arguments for the format
1207 string.
120916. The size of the buffer for calls to the DNS resolver has been increased
1210 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
1211 for addresses that have a lot of PTR records. This alleviates a problem; it
1212 does not fully solve it.
121417. A dnsdb lookup for PTR records that receives more data than will fit in the
1215 buffer now truncates the list and logs the incident, which is the same
1216 action as happens when Exim is looking up a host name and its aliases.
1217 Previously in this situation something unpredictable would happen;
1218 sometimes it was "internal error: store_reset failed".
122018. If a server dropped the connection unexpectedly when an Exim client was
1221 using GnuTLS and trying to read a response, the client delivery process
1222 crashed while trying to generate an error log message.
122419. If a "warn" verb in an ACL added multiple headers to a message in a single
1225 string, for example:
1227 warn message = H1: something\nH2: something
1229 the text was added as a single header line from Exim's point of view
1230 though it ended up OK in the delivered message. However, searching for the
1231 second and subsequent header lines using $h_h2: did not work. This has been
1232 fixed. Similarly, if a system filter added multiple headers in this way,
1233 the routers could not see them.
123520. Expanded the error message when iplsearch is called with an invalid key to
1236 suggest using net-iplsearch in a host list.
123821. When running tests using -bh, any delays imposed by "delay" modifiers in
1239 ACLs are no longer actually imposed (and a message to that effect is
1240 output).
124222. If a "gecos" field in a passwd entry contained escaped characters, in
1243 particular, if it contained a \" sequence, Exim got it wrong when building
1244 a From: or a Sender: header from that name. A second bug also caused
1245 incorrect handling when an unquoted " was present following a character
1246 that needed quoting.
124823. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1249 was not being matched caselessly.
125124. Arranged for all hyphens in the exim.8 source to be escaped with
1252 backslashes.
125425. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1255 properly. Recipient callout cache records were still being keyed to include
1256 the sender, even when use_sender was set false. This led to far more
1257 callouts that were necessary. The sender is no longer included in the key
1258 when use_sender is false.
126026. Added "control = submission" modifier to ACLs.
126227. Added the ${base62d: operator to decode base 62 numbers.
126428. dnsdb lookups can now access SRV records.
126629. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1267 the configuration file.
126930. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1270 (-v) mode. This makes the output for a verbose queue run more intelligible.
127231. Added a use_postmaster feature to recipient callouts.
127432. Added the $body_zerocount variable, containing the number of binary zero
1275 bytes in the message body.
127733. The time of last modification of the "new" subdirectory is now used as the
1278 "mailbox time last read" when there is a quota error for a maildir
1279 delivery.
128134. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
128335. Added +ignore_unknown as a special item in host lists.
128536. Code for decoding IPv6 addresses in host lists is now included, even if
1286 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1287 address was recognized as an IP address, but was then not correctly decoded
1288 into binary, causing unexpected and incorrect effects when compared with
1289 another IP address.
1292Exim version 4.34
1295 1. Very minor rewording of debugging text in manualroute to say "list of
1296 hosts" instead of "hostlist".
1298 2. If verify=header_syntax was set, and a header line with an unqualified
1299 address (no domain) and a large number of spaces between the end of the
1300 name and the colon was received, the reception process suffered a buffer
1301 overflow, and (when I tested it) crashed. This was caused by some obsolete
1302 code that should have been removed. The fix is to remove it!
1304 3. When running in the test harness, delay a bit after writing a bounce
1305 message to get a bit more predictability in the log output.
1307 4. Added a call to search_tidyup() just before forking a reception process. In
1308 theory, someone could use a lookup in the expansion of smtp_accept_max_
1309 per_host which, without the tidyup, could leave open a database connection.
1311 5. Added the variables $recipient_data and $sender_data which get set from a
1312 lookup success in an ACL "recipients" or "senders" condition, or a router
1313 "senders" option, similar to $domain_data and $local_part_data.
1315 6. Moved the writing of debug_print from before to after the "senders" test
1316 for routers.
1318 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1319 problems for message scanning, either using a data ACL, or using
1320 local_scan() because the Received: header was not generated till after they
1321 were called (in order to set the time as the time of reception completion).
1322 I have revised the way this works. The header is now generated after the
1323 body is received, but before the ACL or local_scan() are called. After they
1324 are run, the timestamp in the header is updated.
1327Exim version 4.33
1330 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1331 before starting a queue runner without re-exec. This happened only when
1332 deliver_drop_privilege was set or when the Exim user was set to root. The
1333 effect of the bug was that timeouts during subsequent deliveries caused
1334 crashes instead of being properly handled. The handler is now left at its
1335 default (and expected) setting.
1337 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1338 message, again when deliver_drop_privilege is set or Exim is run as root.
1339 The bug described in (1) was not present in this case, but the tidying up
1340 of the other signals was missing. I have made the two cases consistent.
1342 3. The ignore_target_hosts setting on a manualroute router was being ignored
1343 for hosts that were looked up using the /MX notation.
1345 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1346 in domain lists.
1348 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1349 operated on the sender address. After changing the $sender_address to <>
1350 for the sender address verify, Exim was re-instated it as the original
1351 (before rewriting) address, but remembering that it had rewritten it, so it
1352 wasn't rewriting it again. This bug also had the effect of breaking the
1353 sender address verification caching when the sender address was rewritten.
1355 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1356 This has been changed so that if the ip literal address matches
1357 ignore_target_hosts, the router declines.
1359 7. Added expansion conditions match_domain, match_address, and match_local_
1360 part (NOT match_host).
1362 8. The placeholder for the Received: header didn't have a length field set.
1364 9. Added code to Exim itself and to exim_lock to test for a specific race
1365 condition that could lead to file corruption when using MBX delivery. The
1366 issue is with the lockfile that is created in /tmp. If this file is removed
1367 after a process has opened it but before that process has acquired a lock,
1368 there is the potential for a second process to recreate the file and also
1369 acquire a lock. This could lead to two Exim processes writing to the file
1370 at the same time. The added code performs the same test as UW imapd; it
1371 checks after acquiring the lock that its file descriptor still refers to
1372 the same named file.
137410. The buffer for building added header lines was of fixed size, 8192 bytes.
1375 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1376 when Exim is built.
137811. Added the smtp_active_hostname option. If used, this will typically be made
1379 to depend on the incoming interface address. Because $interface_address is
1380 not set up until the daemon has forked a reception process, error responses
1381 that can happen earlier (such as "too many connections") no longer contain
1382 a host name.
138412. If an expansion in a condition on a "warn" statement fails because a lookup
1385 defers, the "warn" statement is abandoned, and the next ACL statement is
1386 processed. Previously this caused the whole ACL to be aborted.
138813. Added the iplsearch lookup type.
139014. Added ident_timeout as a log selector.
139215. Added tls_certificate_verified as a log selector.
139416. Added a global option tls_require_ciphers (compare the smtp transport
1395 option of the same name). This controls incoming TLS connections.
139717. I finally figured out how to make tls_require_ciphers do a similar thing
1398 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1399 before starting the TLS session.
140118. Tabs are now shown as \t in -bP output.
140319. If the log selector return_path_on_delivery was set, Exim crashed when
1404 bouncing a message because it had too many Received: header lines.
140620. If two routers both had headers_remove settings, and the first one included
1407 a superfluous trailing colon, the final name in the first list and the
1408 first name in the second list were incorrectly joined into one item (with a
1409 colon in the middle).
1412Exim version 4.32
1415 1. Added -C and -D options to the exinext utility, mainly to make it easier
1416 to include in the automated testing, but these could be helpful when
1417 multiple configurations are in use.
1419 2. The exinext utility was not formatting the output nicely when there was
1420 an alternate port involved in the retry record key, nor when there was a
1421 message id as well (for retries that were specific to a specific message
1422 and a specific host). It was also confused by IPv6 addresses, because of
1423 the additional colons they contain. I have fixed the IPv4 problem, and
1424 patched it up to do a reasonable job for IPv6.
1426 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1427 delivery, the log line now contains "pipelined" if PIPELINING was used.
1429 4. An SMTP transport process used to panic and die if the bind() call to set
1430 an explicit outgoing interface failed. This has been changed; it is now
1431 treated in the same way as a connect() failure.
1433 5. A reference to $sender_host_name in the part of a conditional expansion
1434 that was being skipped was still causing a DNS lookup. This no longer
1435 occurs.
1437 6. The def: expansion condition was not recognizing references to header lines
1438 that used bh_ and bheader_.
1440 7. Added the _cache feature to named lists.
1442 8. The code for checking quota_filecount in the appendfile transport was
1443 allowing one more file than it should have been.
1445 9. For compatibility with Sendmail, the command line option
1447 -prval:sval
1449 is equivalent to
1451 -oMr rval -oMs sval
1453 and sets the incoming protocol and host name (for trusted callers). The
1454 host name and its colon can be omitted when only the protocol is to be set.
1455 Note the Exim already has two private options, -pd and -ps, that refer to
1456 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1457 "s", but I don't think that's a major issue.
145910. A number of refactoring changes to the code, none of which should affect
1460 Exim's behaviour:
1462 (a) The number of logging options was getting close to filling up the
1463 32-bit word that was used as a bit map. I have split them into two classes:
1464 those that are passed in the argument to log_write(), and those that are
1465 only ever tested independently outside of that function. These are now in
1466 separate 32-bit words, so there is plenty of room for expansion again.
1467 There is no change in the user interface or the logging behaviour.
1469 (b) When building, for example, log lines, the code previously used a
1470 macro that called string_cat() twice, in order to add two strings. This is
1471 not really sufficiently general. Furthermore, there was one instance where
1472 it was actually wrong because one of the argument was used twice, and in
1473 one call a function was used. (As it happened, calling the function twice
1474 did not affect the overall behaviour.) The macro has been replaced by a
1475 function that can join an arbitrary number of extra strings onto a growing
1476 string.
1478 (c) The code for expansion conditions now uses a table and a binary chop
1479 instead of a serial search (which was left over from when there were very
1480 few conditions). Also, it now recognizes conditions like "pam" even when
1481 the relevant support is not compiled in: a suitably worded error message is
1482 given if an attempt is made to use such a condition.
148411. Added ${time_interval:xxxxx}.
148612. A bug was causing one of the ddress fields not to be passed back correctly
1487 from remote delivery subprocesses. The field in question was not being
1488 subsequently used, so this caused to problems in practice.
149013. Added new log selectors queue_time and deliver_time.
149214. Might have fixed a bug in maildirsizefile handling that threw up
1493 "unexpected character" debug warnings, and recalculated the data
1494 unnecessarily. In any case, I expanded the warning message to give more
1495 information.
149715. Added the message "Restricted characters in address" to the statements in
1498 the default ACL that block characters like @ and % in local parts.
150016. Change 71 for release 4.31 proved to be much less benign that I imagined.
1501 Three changes have been made:
1503 (a) There was a serious bug; a negative response to MAIL caused the whole
1504 recipient domain to be cached as invalid, thereby blocking all messages
1505 to all local parts at the same domain, from all senders. This bug has
1506 been fixed. The domain is no longer cached after a negative response to
1507 MAIL if the sender used is not empty.
1509 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1510 been restored.
1512 (c) A new callout option, "use_sender" has been added for people who want
1513 the modified behaviour.
1516Exim version 4.31
1519 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1520 Larry Rosenman.
1522 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1523 indeed breaks things for older releases.
1525 3. Added additional logging to the case where there is a problem reading data
1526 from a filter that is running in a subprocess using a pipe, in order to
1527 try to track down a specific problem.
1529 4. Testing facility fudge: when running in the test harness and attempting
1530 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1531 getting "No route to host". Convert this to a timeout.
1533 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1534 warning.
1536 6. Some OS don't have socklen_t but use size_t instead. This affects the
1537 fifth argument of getsockopt() amongst other things. This is now
1538 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1539 can be set for individual OS. I have set it for SunOS5, OSF1, and
1540 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1541 some earlier ones do not.
1543 7. Change 4.30/15 was not doing the test caselessly.
1545 8. The standard form for an IPv6 address literal was being rejected by address
1546 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1547 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1548 this, as well as the form without the "IPv6" on the front (but only when
1549 address literals are enabled, of course).
1551 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
155310. Exim crashed if a message with an empty sender address specified by -f
1554 encountered a router with an errors_to setting. This could be provoked only
1555 by a command such as
1557 exim -f "" ...
1559 where an empty string was supplied; "<>" did not hit this bug.
156111. Installed PCRE release 4.5.
156312. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1564 remained set. It is now erased.
156613. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1567 times from message ids (which are base 36 rather than the normal 62).
156914. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1570 were being counted as actual protocol errors, and logged if the log
1571 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1572 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1573 and DATA following a set of rejected RCPTs do not count as protocol errors.
1574 In other words, Exim assumes they were pipelined, though this may not
1575 actually be the case. Of course, in all cases the client gets an
1576 appropriate error code.
157815. If a lookup fails in an ACL condition, a message about the failure may
1579 be available; it is used if testing the ACL cannot continue, because most
1580 such messages specify what the cause of the deferral is. However, some
1581 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1582 that caused an old message to be retained and used if a later statement
1583 caused a defer, replacing the real cause of the deferral.
158516. If an IP address had so many PTR records that the DNS lookup buffer
1586 was not large enough to hold them, Exim could crash while trying to process
1587 the truncated data. It now detects and logs this case.
158917. Further to 4.21/58, another change has been made: if (and only if) the
1590 first line of a message (the first header line) ends with CRLF, a bare LF
1591 in a subsequent header line has a space inserted after it, so as not to
1592 terminate the header.
159418. Refactoring: tidied an ugly bit of code in appendfile that copied data
1595 unnecessarily, used atoi() instead of strtol(), and didn't check the
1596 termination when getting file sizes from file names by regex.
159819. Completely re-implemented the support for maildirsize files, in the light
1599 of a number of problems with the previous contributed implementation
1600 (4.30/29). In particular:
1602 . If the quota is zero, the maildirsize file is maintained, but no quota is
1603 imposed.
1605 . If the maildir directory does not exist, it is created before any attempt
1606 to write a maildirsize file.
1608 . The quota value in the file is just a cache; if the quota is changed in
1609 the transport, the new value overrides.
1611 . A regular expression is available for excluding directories from the
1612 count.
161420. The autoreply transport checks the characters in options that define the
1615 message's headers; it allows continued headers, but it was checking with
1616 isspace() after an embedded newline instead of explicitly looking for a
1617 space or a tab.
161921. If all the "regular" hosts to which an address was routed had passed their
1620 expiry times, and had not reached their retry times, the address was
1621 bounced, even if fallback hosts were defined. Now Exim should go on to try
1622 the fallback hosts.
162422. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1625 equivalent code in the SMTP transport. Some hosts send humungous responses
1626 to HELO/EHLO, more than 1024 it seems.
162823. Refactoring: code in filter.c used (void *) for "any old type" but this
1629 gives compiler warnings in some environments. I've now done it "properly",
1630 using a union.
163224. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1633 (because of problems with the built-in one) was declared to return uschar *
1634 instead of char *, causing compiler failure.
163625. Fixed a file descriptor leak when processing alias/forward files.
163826. Fixed a minor format string issue in dbfn.c.
164027. Typo in exim.c: ("dmbnz" for "dbmnz").
164228. If a filter file refered to $h_xxx or $message_headers, and the headers
1643 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1644 become corrupted.
164629. When a sender address is verified, it is cached, to save repeating the test
1647 when there is more than one recipient in a message. However, when the
1648 verification involves a callout, it is possible for different callout
1649 options to be set for different recipients. It is too complicated to keep
1650 track of this in the cache, so now Exim always runs a verification when a
1651 callout is required, relying on the callout cache for the optimization.
1652 The overhead is duplication of the address routing, but this should not be
1653 too great.
165530. Fixed a bug in callout caching. If a RCPT command caused the sender address
1656 to be verified with callout=postmaster, and the main callout worked but the
1657 postmaster check failed, the verification correctly failed. However, if a
1658 subsequent RCPT command asked for sender verification *without* the
1659 postmaster check, incorrect caching caused this verification also to fail,
1660 incorrectly.
166231. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1663 it was not caching the DNS options (qualify_single, search_parents) that
1664 were used when the lookup failed. A subsequent lookup with different
1665 options therefore always gave the same answer, though there were cases
1666 where it should not have. (Example: a "domains = !$mx_any" option on a
1667 dnslookup router: the "domains" option is always processed without any
1668 widening, but the router might have qualify_single set.) Now Exim uses the
1669 cached value only when the same options are set.
167132. Added John Jetmore's "exipick" utility to the distribution.
167333. GnuTLS: When an attempt to start a TLS session fails for any reason other
1674 than a timeout (e.g. a certificate is required, and is not provided), an
1675 Exim server now closes the connection immediately. Previously it waited for
1676 the client to close - but if the client is SSL, it seems that they each
1677 wait for each other, leading to a delay before one of them times out.
167934: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1680 maintained 0.8.x compatibility because I don't think many are using it, and
1681 it is clearly obsolete.
168335. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1684 transport.
168636. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1687 client certificate was expired. A simple patch fixes this, though I don't
1688 understand the full logic of why the verify callback is called multiple
1689 times.
169137. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1692 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1693 which causes problems with some clients (such as the Certicom SSL Plus
1694 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1695 disables the coutermeasure allowing Eudora to connect."
169738. Exim was not checking that a write() to a log file succeeded. This could
1698 lead to Bad Things if a log got too big, in particular if it hit a file
1699 size limit. Exim now panics and dies if it cannot write to a log file, just
1700 as it does if it cannot open a log file.
170239. Modified OS/Makefile-Linux so that it now contains
1706 The two -D definitions ensure that Exim is compiled with large file
1707 support, which makes it possible to handle log files that are bigger than
1708 2^31.
171040. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1711 instance) a domain was checked against a named list that involved a lookup,
1712 causing $domain_data to be set, then another domain was checked against the
1713 same list, then the first domain was re-checked, the value of $domain_data
1714 after the final check could be wrong. In particular, if the second check
1715 failed, it could be set empty. This bug probably also applied to
1716 $localpart_data.
171841. The strip_trailing_dot option was not being applied to the address given
1719 with the -f command-line option.
172142. The code for reading a message's header from the spool was incrementing
1722 $received_count, but never initializing it. This meant that the value was
1723 incorrect (doubled) while delivering a message in the same process in which
1724 it was received. In the most common configuration of Exim, this never
1725 happens - a fresh exec is done - but it can happen when
1726 deliver_drop_privilege is set.
172843. When Exim logs an SMTP synchronization error - client data sent too soon -
1729 it now includes up to 150 characters of the unexpected data in the log
1730 line.
173244. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1733 and building data strings. The size of both of these buffers was 10 000
1734 bytes - far larger than anybody would *ever* want, thought I. Needless to
1735 say, somebody hit the limit. I have increased the maximum line length to
1736 20 000 and the maximum data length of concatenated lines to 100 000. I have
1737 also fixed two bugs, because there was no checking on these buffers. Tsk,
1738 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1739 buffer is too small.
174145. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1742 lsearch lookups. Now it does.
174446. When parsing a route_list item in a manualroute router, a fixed-length
1745 buffer was used for the list of hosts. I made this 1024 bytes long,
1746 thinking that nobody would ever have a list of hosts that long. Wrong.
1747 Somebody had a whole pile of complicated expansion conditions, and the
1748 string was silently truncated, leading to an expansion error. It turns out
1749 that it is easier to change to an unlimited length (owing to other changes
1750 that have happened since this code was originally written) than to build
1751 structure for giving a limitation error. The length of the item that
1752 expands into the list of hosts is now unlimited.
175447. The lsearch lookup could not handle data where the length of text line was
1755 more than 4095 characters. Such lines were truncated, leading to shortened
1756 data being returned. It should now handle lines of any length.
175848. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1759 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1760 ACL").
176249. Cosmetic tidy to scripts like exicyclog that are generated by globally
1763 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1764 no longer happens in comment lines. A list of replacements is now placed
1765 at the head of all of the source files, except those whose only change is
1766 to replace PERL_COMMAND in the very first #! line.
176850. Replaced the slow insertion sort in queue.c, for sorting the list of
1769 messages on the queue, with a bottom-up merge sort, using code contributed
1770 by Michael Haardt. This should make operations like -bp somewhat faster on
1771 large queues. It won't affect queue runners, except when queue_run_in_order
1772 is set.
177451. Installed eximstats 1.31 in the distribution.
177652. Added support for SRV lookups to the dnslookup router.
177853. If an ACL referred to $message_body or $message_body_end, the value was not
1779 reset for any messages that followed in the same SMTP session.
178154. The store-handling optimization for building very long strings was not
1782 differentiating between the different store pools. I don't think this
1783 actually made any difference in practice, but I've tidied it.
178555. While running the routers to verify a sender address, $sender_address
1786 was still set to the sender address. This is wrong, because when routing to
1787 send a bounce to the sender, it would be empty. Therefore, I have changed
1788 it so that, while verifying a sender address, $sender_address is set to <>.
1789 (There is no change to what happens when verifying a recipient address.)
179156. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1792 target A or AAAA records (if not already returned) without resetting the
1793 qualify_single or search_parents options of the DNS resolver. These are
1794 inappropriate in this case because the targets of MX and SRV records must
1795 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1796 target that, when qualified, matched something in the local domain. These
1797 two options are now turned off when doing these lookups.
179957. It seems that at least some releases of Reiserfs (which does not have the
1800 concept of a fixed number of inodes) returns zero and not -1 for the
1801 number of available inodes. This interacted badly with check_spool_inodes,
1802 which assumed that -1 was the "no such thing" setting. What I have done is
1803 to check that the total number of inodes is greater than zero before doing
1804 the test of how many are available.
180658. When a "warn" ACL statement has a log_message modifier, the message is
1807 remembered, and not repeated. This is to avoid a lot of repetition when a
1808 message has many recipients that cause the same warning to be written.
1809 Howewer, Exim was preserving the list of already written lines for an
1810 entire SMTP session, which doesn't seem right. The memory is now reset if a
1811 new message is started.
181359. The "rewrite" debugging flag was not showing the result of rewriting in the
1814 debugging output unless log_rewrite was also set.
181660. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1817 of (int)(handle) when we know that handle contains (void *)(-1).
181961. The Exim daemon panic-logs an error return when it closes the incoming
1820 connection. However "connection reset by peer" seems to be common, and
1821 isn't really an error worthy of noting specially, so that particular error
1822 is no long logged.
182462. When Exim is trying to find all the local interfaces, it used to panic and
1825 die if the ioctl to get the interface flags failed. However, it seems that
1826 on at least one OS (Solaris 9) it is possible to have an interface that is
1827 included in the list of interfaces, but for which you get a failure error
1828 for this call. This happens when the interface is not "plumbed" into a
1829 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1830 failure of the "get flags" call assumes that the interface is down.
183263. Added a ${eval10: operator, which assumes all numbers are decimal. This
1833 makes life easier for people who are doing arithmetic on fields extracted
1834 from dates, where you often get leading zeros that should not be
1835 interpreted as octal.
183764. Added qualify_domain to the redirect router, to override the global
1838 setting.
184065. If a pathologically long header line contained very many addresses (the
1841 report of this problem mentioned 10 000) and each of them was rewritten,
1842 Exim could use up a very large amount of memory. (It kept on making new
1843 copies of the header line as it rewrote, and never released the old ones.)
1844 At the expense of a bit more processing, the header rewriting function has
1845 been changed so that it no longer eats memory in this way.
184766. The generation of the Received: header has been moved from the time that a
1848 message starts to be received, to the time that it finishes. The timestamp
1849 in the Received: header should now be very close to that of the <= log
1850 line. There are two side-effects of this change:
1852 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1853 logged header lines no longer include the local Received: line, because
1854 it has not yet been created. The same applies to a copy of the message
1855 that is returned to a non-SMTP sender when a message is rejected.
1857 (b) When a filter file is tested using -bf, no additional Received: header
1858 is added to the test message. After some thought, I decided that this
1859 is a bug fix.
1861 This change does not affect the value of $received_for. It is still set
1862 after address rewriting, but before local_scan() is called.
186467. Installed the latest Cygwin-specific files from the Cygwin maintainer.
186668. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1867 gave an unhelpful panic error message, and a defer error. I have managed to
1868 change this behaviour so that it now rejects any supplied certificate,
1869 which seems right, as the list of acceptable certificates is empty.
187169. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1872 gave an unhelpful defer error. I have not managed to make this reject any
1873 supplied certificates, but the error message it gives is "no certificate
1874 supplied", which is not helpful.
187670. exigrep's output now also includes lines that are not associated with any
1877 message, but which match the given pattern. Implemented by a patch from
1878 Martin Sluka, which also tidied up the Perl a bit.
188071. Recipient callout verification, like sender verification, was using <> in
1881 the MAIL FROM command. This isn't really the right thing, since the actual
1882 sender may affect whether the remote host accepts the recipient or not. I
1883 have changed it to use the actual sender in the callout; this means that
1884 the cache record is now keyed on a recipient/sender pair, not just the
1885 recipient address. There doesn't seem to be a real danger of callout loops,
1886 since a callout by the remote host to check the sender would use <>.
1887 [SEE ABOVE: changed after hitting problems.]
188972. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1890 temporary errors. However, in the case of such a code being given after
1891 the end of a data transmission (i.e. after ".") Exim was failing to write
1892 a retry record for the message. (Yes, there was some broken host that was
1893 actually sending 8xx at this point.)
189573. An unknown lookup type in a host list could cause Exim to panic-die when
1896 the list was checked. (An example that provoked this was putting <; in the
1897 middle of a list instead of at the start.) If this happened during a DATA
1898 ACL check, a -D file could be left lying around. This kind of configuration
1899 error no longer causes Exim to die; instead it causes a defer errror. The
1900 incident is still logged to the main and panic logs.
190274. Buglet left over from Exim 3 conversion. The message "too many messages
1903 in one connection" was written to the rejectlog but not the mainlog, except
1904 when address rewriting (yes!) was being logged.
190675. Added write_rejectlog option.
190876. When a system filter was run not as root (that is, when system_filter_user
1909 was set), the values of the $n variables were not being returned to the
1910 main process; thus, they were not subsequently available in the $sn
1911 variables.
191377. Added +return_path_on_delivery log selector.
191578. A connection timeout was being treated differently from recipients deferred
1916 when testing hosts_max_try with a message that was older than the host's
1917 retry timeout. (The host should not be counted, thus allowing all hosts to
1918 be tried at least once before bouncing.) This may have been the cause of an
1919 occasionally reported bug whereby a message would remain on the queue
1920 longer than the retry timeout, but would be bounced if a delivery was
1921 forced. I say "may" because I never totally pinned down the problem;
1922 setting up timeout/retry tests is difficult. See also the next item.
192479. The ultimate address timeout was not being applied to errors that involved
1925 a combination of host plus message (for example, a timeout on a MAIL
1926 command). When an address resolved to a number of possible hosts, and they
1927 were not all tried for each delivery (e.g. because of hosts_max_try), a
1928 message could remain on the queue longer than the retry timeout.
193080. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1931 Haardt.
193381. Fixed an obscure SMTP outgoing bug which required at least the following
1934 conditions: (a) there was another message waiting for the same server;
1935 (b) the server returned 5xx to all RCPT commands in the first message so
1936 that the message was not completed; (c) the server dropped the connection
1937 or gave a negative response to the RSET that Exim sends to abort the
1938 transaction. The observed case was a dropped connection after DATA that had
1939 been sent in pipelining mode. That is, the server had advertised PIPELINING
1940 but was not implementing it correctly. The effect of the bug was incorrect
1941 behaviour, such as trying another host, and this could lead to a crash.
1944Exim version 4.30
1947 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1948 and daemon.c were passed as pointers to ints; they should have been
1949 pointers to socklen_t variables (which are typically unsigned ints).
1951 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1952 fixed.
1954 3. Fixed a really odd bug that affected only the testing scheme; patching a
1955 certain fixed string in the binary changed the value of another string that
1956 happened to be identical to the end of the original first string.
1958 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1959 name", it returns that address as the IP address. On some operating
1960 systems (e.g. Solaris), it also passes back the IP address string as the
1961 "host name". However, on others (e.g. Linux), it passes back an empty
1962 string. Exim wasn't checking for this, and was changing the host name to an
1963 empty string, assuming it had been canonicized.
1965 5. Although rare, it is permitted to have more than one PTR record for a given
1966 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1967 all the names associated with an address, because they do in Solaris.
1968 However, it seems that they do not in Linux for data that comes from the
1969 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1970 I found this out when I moved to a new Linux workstation and tried to run
1971 the Exim test suite.
1973 To get round this problem I have changed the code so that it now does its
1974 own call to the DNS to look up PTR records when searching for a host name.
1975 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1976 addresses that are only in /etc/hosts are still found.
1978 This behaviour is, however, controlled by an option called host_lookup_
1979 order, which defaults to "bydns:byaddr". If people want to use the other
1980 order, or indeed, just use one or the other means of lookup, they can
1981 specify it in this variable.
1983 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1984 some operating systems, this comes back from gethostbyaddr() as an empty
1985 string, and this is what Exim used to test for. However, it seems that in
1986 other systems, "." is yielded. Exim now tests for this case too.
1988 7. The values of check_spool_space and check_log_space are now held internally
1989 as a number of kilobytes instead of an absolute number of bytes. If a
1990 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1991 kilobyte. This means that much larger values can be stored.
1993 8. Exim monitor: an attempt to get the action menu when not actually pointing
1994 at a message produces an empty menu entitled "No message selected". This
1995 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1996 no entries in it ("Shell widget menu has zero width and/or height"). So I
1997 have added a single, blank menu entry in this case.
1999 9. Added ${quote_local_part.
200110. MIME decoding is now applied to the contents of Subject: header lines when
2002 they are logged.
200411. Now that a reference to $sender_host_address automatically causes a reverse
2005 lookup to occur if necessary (4.13/18), there is no need to arrange for a
2006 host lookup before query-style lookups in lists that might use this
2007 variable. This has therefore been abolished, and the "net-" prefix is no
2008 longer necessary for query-style lookups.
201012. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
2011 have been a typo for LFLAGS, so it has been changed.
201313. The install script calls Exim with "-C /dev/null" in order to find the
2014 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
2015 to be output. Howeve, since Exim outputs its version number before the
2016 error, it didn't break the script. It just looked ugly. I fixed this by
2017 always allowing "-C /dev/null" if the caller is root.
201914. Ignore overlarge ACL variable number when reading spool file - insurance
2020 against a later release with more variables having written the file.
202215. The standard form for an IPv6 address literal was being rejected by EHLO.
2023 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
2024 this, as well as the form without the "IPv6" on the front.
202616. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
2027 OS/Makefile-Darwin file.
202917. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
2030 only to LDAP libraries that do not have LDAP_OPT_DEREF.
203218. After change 4.21/52, "%ld" was used to format the contents of the $inode
2033 variable. However, some OS use ints for inodes. I've added cast to long int
2034 to get rid of the compiler warning.
203619. I had forgotten to lock out "/../" in configuration file names when
2037 ALT_CONFIG_PREFIX was set.
203920. Routers used for verification do not need to specify transports. However,
2040 if such a router generated a host list, and callout was configured, Exim
2041 crashed, because it could not find a port number from the (non-existent)
2042 transport. It now assumes port 25 in this circumstance.
204421. Added the -t option to exigrep.
204622. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
2047 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
2048 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
2049 them is set, LOOKUP_LSEARCH is forced.
205123. "exim -bV" now outputs a list of lookups that are included in the binary.
205324. Added sender and host information to the "rejected by local_scan()" log
2054 line; previously there was no indication of these.
205625. Added .include_if_exists.
205826. Change 3.952/11 added an explicit directory sync on top of a file sync for
2059 Linux. It turns out that not all file systems support this. Apparently some
2060 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
2061 do it.) To cope with this, the error EINVAL, which means that sync-ing is
2062 not supported on the file descriptor, is now ignored when Exim is trying to
2063 sync a directory. This applies only to Linux.
206527. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
206728. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
2068 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
2069 this.
207129. Added support for maildirsize files from supplied patch (modified a bit).
207330. The use of :fail: followed by an empty string could lead Exim to respond to
2074 sender verification failures with (e.g.):
2076 550 Verification failed for <xxx>
2077 550 Sender verify failed
2079 where the first response line was missing the '-' that indicates it is not
2080 the final line of the response.
208231. The loop for finding the name of the user that called Exim had a hardwired
2083 limit of 10; it now uses the value of finduser_retries, which is used for
2084 all other user lookups.
208632. Added $received_count variable, available in data and not_smtp ACLs, and at
2087 delivery time.
208933. Exim was neglecting to zero errno before one call of strtol() when
2090 expanding a string and expecting an integer value. On some systems this
2091 resulted in spurious "integer overflow" errors. Also, it was casting the
2092 result into an int without checking.
209434. Testing for a connection timeout using "timeout_connect" in the retry rules
2095 did not work. The code looks as if it has *never* worked, though it appears
2096 to have been documented since at least releast 1.62. I have made it work.
209835. The "timeout_DNS" error in retry rules, also documented since at least
2099 1.62, also never worked. As it isn't clear exactly what this means, and
2100 clearly it isn't a major issue, I have abolished the feature by treating it
2101 as "timeout", and writing a warning to the main and panic logs.
210336. The display of retry rules for -brt wasn't always showing the error code
2104 correctly.
210637. Added new error conditions to retry rules: timeout_A, timeout_MX,
2107 timeout_connect_A, timeout_connect_MX.
210938. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
2110 to the empty sender.
211239. The daemon was not analysing the content of -oX till after it had closed
2113 stderr and disconnected from the controlling terminal. This meant that any
2114 syntax errors were only noted on the panic log, and the return code from
2115 the command was 0. By re-arranging the code a little, I've made the
2116 decoding happen first, so such errors now appear on stderr, and the return
2117 code is 1. However, the actual setting up of the sockets still happens in
2118 the disconnected process, so errors there are still only recorded on the
2119 panic log.
212140. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
2122 connections (as happens on some IP stacks) was logged at start up time as
2123 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
2124 it from "IPv6 and IPv4", which means that two separate sockets are being
2125 used.
212741. The debug output for gethostbyname2() or getipnodebyname() failures now
2128 says whether AF_INET or AF_INET6 was passed as an argument.
213042. Exiwhat output was messed up when time zones were included in log
2131 timestamps.
213343. Exiwhat now gives more information about the daemon's listening ports,
2134 and whether -tls-on-connect was used.
213644. The "port" option of the smtp transport is now expanded.
213845. A "message" modifier in a "warn" statement in a non-message ACL was being
2139 silently ignored. Now an error message is written to the main and panic
2140 logs.
214246. There's a new ACL modifier called "logwrite" which writes to a log file
2143 as soon as it is encountered.
214547. Added $local_user_uid and $local_user_gid at routing time.
214748. Exim crashed when trying to verify a sender address that was being
2148 rewritten to "<>".
215049. Exim was recognizing only a space character after ".include". It now also
2151 recognizes a tab character.
215350. Fixed several bugs in the Perl script that creates the exim.8 man page by
2154 extracting the relevant information from the specification. The man page no
2155 longer contains scrambled data for the -d option, and I've added a section
2156 at the front about calling Exim under different names.
215851. Added "extra_headers" argument to the "mail" command in filter files.
216052. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
2161 crash.
216353. Installed eximstats 1.29.
216554. Added transport_filter_timeout as a generic transport option.
216755. Exim no longer adds an empty Bcc: header to messages that have no To: or
2168 Cc: header lines. This was required by RFC 822, but it not required by RFC
2169 2822.
217156. Exim used to add From:, Date:, and Message-Id: header lines to any
2172 incoming messages that did not have them. Now it does so only if the
2173 message originates locally, that is, if there is no associated remote host
2174 address. When Resent- header lines are present, this applies to the Resent-
2175 lines rather than the non-Resent- lines.
217757. Drop incoming SMTP connection after too many syntax or protocol errors. The
2178 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
218058. Messages for configuration errors now include the name of the main
2181 configuration file - useful now that there may be more than one file in a
2182 list (.included file names were always shown).
218459. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
2185 for those rare installations that do not start the daemon as root or run it
2186 setuid root. I've cut out the call to initgroups() if the daemon is not
2187 root at that time.
218960. The Exim user and group can now be bound into the binary as text strings
2190 that are looked up at the start of Exim's processing.
219261. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
219462. Added $mailstore_basename variable.
219663. Installed patch to sieve.c from Michael Haardt.
219864. When Exim failed to open the panic log after failing to open the main log,
2199 the original message it was trying to log was written to stderr and debug
2200 output, but if they were not available (the usual case in production), it
2201 was lost. Now it is written to syslog before the two lines that record the
2202 failures to open the logs.
220465. Users' Exim filters run in subprocesses under the user's uid. It is
2205 possible for a "deliver" command or an alias in a "personal" command to
2206 provoke an address rewrite. If logging of address rewriting is configured,
2207 this fails because the process is not running as root or exim. There may be
2208 a better way of dealing with this, but for the moment (because 4.30 needs
2209 to be released), I have disabled address rewrite logging when running a
2210 filter in a non-root, non-exim process.
2213Exim version 4.24
2216 1. The buildconfig auxiliary program wasn't quoting the value set for
2217 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
2218 not defined. This bug was masked in 4.22 by the effect that was fixed in
2219 change 4.23/1.
2221 2. Some messages that were rejected after a message id was allocated were
2222 shown as "incomplete" by exigrep. It no longer does this for messages that
2223 are rejected by local_scan() or the DATA or non-SMTP ACLs.
2225 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
2226 have allow_domain_literals set, the ID did not get logged in the <= line.
2227 Domain literals are now always recognized in Message-ID: header lines.
2229 4. The first argument for a ${extract expansion item is the key name or field
2230 number. Leading and trailing spaces in this item were not being ignored,
2231 causing some misleading effects.
2233 5. When deliver_drop_privilege was set, single queue runner processes started
2234 manually (i.e. by the command "exim -q") or by the daemon (which uses the
2235 same command in the process it spins off) were not dropping privilege.
2237 6. When the daemon running as "exim" started a queue runner, it always
2238 re-executed Exim in the spun-off process. This is a waste of effort when
2239 deliver_drop_privilege is set. The new process now just calls the
2240 queue-runner function directly.
2243Exim version 4.23
2246 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2249 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2250 ignored. Though the use of -oP was forcing the writing of a pid file, it
2251 was always written to the default place.
2253 3. If the message "no IP address found for host xxxx" is generated during
2254 incoming verification, it is now followed by identification of the incoming
2255 connection (so you can more easily find what provoked it).
2257 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2259 5. Added some features to "harden" Exim a bit more against certain attacks:
2261 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2262 be put in Local/Makefile. This is like the never_users runtime option,
2263 but it cannot be overridden. The default setting is "root".
2265 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2266 prefix string with which any file named in a -C command line option
2267 must start.
2269 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2270 is retained for -C and -D only if the caller of Exim is root. Without
2271 it, the exim user may also use -C and -D and retain privilege.
2273 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2274 command line option is disabled.
2276 6. Macro names set by the -D option must start with an upper case letter, just
2277 like macro names defined in the configuration file.
2279 7. Added "dereference=" facility to LDAP.
2281 8. Two instances of the typo "uknown" in the source files are fixed.
2283 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2284 the Configure-Makefile script screwed up while processing it.
228610. Incorporated PCRE 4.4.
228811. The SMTP synchronization check was not operating right at the start of an
2289 SMTP session. For example, it could not catch a HELO sent before the client
2290 waited for the greeting. There is now a check for outstanding input at the
2291 point when the greeting is written. Because of the duplex, asynchronous
2292 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2293 way, but not yet received, when the check is performed.
229512. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2296 on TCP/IP sockets, because this apparently causes some broken clients to
2297 timeout.
229913. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2300 unchanged) from the Cygwin maintainer.
230214. The code for -bV that shows what is in the binary showed "mbx" when maildir
2303 was supported instead of testing for mbx. Effectively a typo.
230515. The spa authenticator server code was not checking that the input it
2306 received was valid base64.
230816. The debug output line for the "set" modifier in ACLs was not showing the
2309 name of the variable that was being set.
231117. Code tidy: the variable type "vtype_string" was never used. Removed it.
231318. Previously, a reference to $sender_host_name did not cause a DNS reverse
2314 lookup on its own. Something else was needed to trigger the lookup. For
2315 example, a match in host_lookup or the need for a host name in a host list.
2316 Now, if $sender_host_name is referenced and the host name has not yet been
2317 looked up, a lookup is performed. If the lookup fails, the variable remains
2318 empty, and $host_lookup_failed is set to "1".
232019. Added "eqi" as a case-independent comparison operator.
232220. The saslauthd authentication condition could segfault if neither service
2323 nor realm was specified.
232521. If an overflowing value such as "2048M" was set for message_size_limit, the
2326 error message that was logged was misleading, and incoming SMTP
2327 connections were dropped. The message is now more accurate, and temporary
2328 errors are given to SMTP connections.
233022. In some error situations (such as 21 above) Exim rejects all SMTP commands
2331 (except RSET) with a 421 error, until QUIT is received. However, it was
2332 failing to send a response to QUIT.
233423. The HELO ACL was being run before the code for helo_try_verify_hosts,
2335 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2336 ACL is now run after the helo_try_verify_hosts code.
233824. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2339 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2340 case-independent, so other case variants are also recognized). Apparently
2341 some systems use these upper case variants.
234325. If more than two messages were waiting for the same host, and a transport
2344 filter was specified for the transport, Exim sent two messages over the
2345 same TCP/IP connection, and then failed with "socket operation on non-
2346 socket" when it tried to send the third.
234826. Added Exim::debug_write and Exim::log_write for embedded Perl use.
235027. The extern definition of crypt16() in expand.c was not being excluded when
2351 the OS had its own crypt16() function.
235328. Added bounce_return_body as a new option, and bounce_return_size_limit
2354 as a preferred synonym for return_size_limit, both as an option and as an
2355 expansion variable.
235729. Added LIBS=-liconv to OS/Makefile-OSF1.
235930. Changed the default configuration ACL to relax the local part checking rule
2360 for addresses that are not in any local domains. For these addresses,
2361 slashes and pipe symbols are allowed within local parts, but the sequence
2362 /../ is explicitly forbidden.
236431. SPA server authentication was not clearing the challenge buffer before
2365 using it.
236732. log_message in a "warn" ACL statement was writing to the reject log as
2368 well as to the main log, which contradicts the documentation and doesn't
2369 seem right (because no rejection is happening). So I have stopped it.
237133. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2372 However, I am unable to do any testing of this.
237434. Fixed an infelicity in the appendfile transport. When checking directories
2375 for a mailbox, to see if any needed to be created, it was accidentally
2376 using path names with one or more superfluous leading slashes; tracing
2377 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
237935. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2380 contents are added to the log line that is written for every discarded
2381 recipient. (Previously a log_message setting was ignored.)
238336. The ${quote: operator now quotes the string if it is empty.
238537. The install script runs exim in order to find its version number. If for
2386 some reason other than non-existence or emptiness, which it checks, it
2387 could not run './exim', it was installing it with an empty version number,
2388 i.e. as "exim-". This error state is now caught, and the installation is
2389 aborted.
239138. An argument was missing from the function that creates an error message
2392 when Exim fails to connect to the socket for saslauthd authentication.
2393 This could cause Exim to crash, or give a corrupted message.
239539. Added isip, isip4, and isip6 to ${if conditions.
239740. The ACL variables $acl_xx are now saved with the message, and can be
2398 accessed later in routers, transports, and filters.
240041. The new lookup type nwildlsearch is like wildlsearch, except that the key
2401 strings in the file are not string-expanded.
240342. If a MAIL command specified a SIZE value that was too large to fit into an
2404 int variable, the check against message_size_limit failed. Such values are
2405 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2406 day this will have to be increased, but I don't think I want to be around
2407 when emails are that large.
2411Exim version 4.22
2414 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2415 iconv() is not standard in FreeBSD.
2417 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2418 IPv6 enabled. The observed symptom was a segmentation fault on return from
2419 the function os_common_find_running_interfaces() in src/os.c.
2421 3. In the check_special_case() function in daemon.c I had used "errno" as an
2422 argument name, which causes warnings on some systems. This was basically a
2423 typo, since it was named "eno" in the comments!
2425 4. The code that waits for the clock to tick (at a resolution of some fraction
2426 of a second) so as to ensure message-id uniqueness was always waiting for
2427 at least one whole tick, when it could have waited for less. [This is
2428 almost certainly not relevant at current processor speeds, where it is
2429 unlikely to ever wait at all. But we try to future-proof.]
2431 5. The function that sleeps for a time interval that includes fractions of a
2432 second contained a race. It did not block SIGALRM between setting the
2433 timer, and suspending (a couple of lines later). If the interval was short
2434 and the sigsuspend() was delayed until after it had expired, the suspension
2435 never ended. On busy systems this could lead to processes getting stuck for
2436 ever.
2438 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2439 process, before it forks any delivery processes. The open lookup caching
2440 mechanism meant that the open file or database connection was passed into
2441 the delivery process. The problem was that delivery processes always tidy
2442 up cached lookup data. This could cause a problem for the next delivery
2443 process started by the queue runner, because the external queue runner
2444 process does not know about the closure. So the next delivery process
2445 still has data in the lookup cache. In the case of a file lookup, there was
2446 no problem because closing a file descriptor in a subprocess doesn't affect
2447 the parent. However, if the lookup was caching a connection to a database,
2448 the connection was closed, and the second delivery process was likely to
2449 see errors such as "PGSQL: query failed: server closed the connection
2450 unexpectedly". The problem has been fixed by closing all cached lookups
2451 in a queue runner before running a delivery process.
2453 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2454 seem to have the "const" qualifier which it has on other OS. I've
2455 parameterised it.
2457 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2458 *of the same type* (client or server) with the same public name that an
2459 error should be diagnosed.
2461 9. When Exim looked up a host name for an IP address, but failed to find the
2462 original IP address when looking up the host name (a safety check), it
2463 output the message "<ip address> does not match any IP for NULL", which was
2464 confusing, to say the least. The bug was that the host name should have
2465 appeared instead of "NULL".
246710. Since release 3.03, if Exim is called by a uid other than root or the Exim
2468 user that is built into the binary, and the -C or -D options is used, root
2469 privilege is dropped before the configuration file is read. In addition,
2470 logging is switched to stderr instead of the normal log files. If the
2471 configuration then re-defines the Exim user, the unprivileged environment
2472 is probably not what is expected, so Exim logs a panic warning message (but
2473 proceeds).
2475 However, if deliver_drop_privilege is set, the unprivileged state may well
2476 be exactly what is intended, so the warning has been cut out in that case,
2477 and Exim is allowed to try to write to its normal log files.
2480Exim version 4.21
2483 1. smtp_return_error_details was not giving details for temporary sender
2484 or receiver verification errors.
2486 2. Diagnose a configuration error if two authenticators have the same public
2487 name.
2489 3. Exim used not to create the message log file for a message until the first
2490 delivery attempt. This could be confusing when incoming messages were held
2491 for policy or load reasons. The message log file is now created at the time
2492 the message is received, and an initial "Received" line is written to it.
2494 4. The automatically generated man page for command line options had a minor
2495 bug that caused no ill effects; however, a more serious problem was that
2496 the procedure for building the man page automatically didn't always
2497 operate. Consequently, release 4.20 contains an out-of-date version. This
2498 shouldn't happen again.
2500 5. When building Exim with embedded Perl support, the script that builds the
2501 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2502 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2504 6. The freeze_tell option was not being used for messages that were frozen on
2505 arrival, either by an ACL or by local_scan().
2507 7. Added the smtp_incomplete_transaction log selector.
2509 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2510 was accepting AUTH without a new EHLO.
2512 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2513 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2514 RFC.
251610. Logging of TCP/IP connections (when configured) now happens in the main
2517 daemon process instead of the child process, so that the TCP/IP connection
2518 count is more accurate (but it can never be perfect).
252011. The use of "drop" in a nested ACL was not being handled correctly in the
2521 outer ACL. Now, if condition failure induced by the nested "drop" causes
2522 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2523 or "require"), the connection is dropped.
252512. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2526 that yield "discard" can now be used with an "accept" or a "discard" verb,
2527 but an error is generated for any others (because I can't see a useful way
2528 to define what should happen).
253013. When an ACL is read dynamically from a file (or anywhere else), the lines
2531 are now processed in the same way as lines in the Exim configuration file.
2532 In particular, continuation lines are supported.
253414. Added the "dnslists = a.b.c!=n.n.n.n" feature.
253615. Added -ti meaning -t -i.
253816. Check for letters, digits, hyphens, and dots in the names of dnslist
2539 domains, and warn by logging if others are found.
254117. At least on BSD, alignment is not guarenteed for the array of ifreq's
2542 returned from GIFCONF when Exim is trying to find the list of interfaces on
2543 a host. The code in os.c has been modified to copy each ifreq to an aligned
2544 structure in all cases.
2546 Also, in some cases, the returned ifreq's were being copied to a 'struct
2547 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2548 means the last couple of bytes of an IPv6 address could be chopped if the
2549 ifreq contained only a normal sockaddr (14 bytes storage).
255118. Named domain lists were not supported in the hosts_treat_as_local option.
2552 An entry such as +xxxx was not recognized, and was treated as a literal
2553 domain name.
255519. Ensure that header lines added by a DATA ACL are included in the reject log
2556 if the ACL subsequently rejects the message.
255820. Upgrade the utility script to use Digest::MD5 instead of just
2559 MD5 (which is deprecated).
256121. When testing a filter file using -bf, Exim was writing a message when it
2562 took the sender from a "From " line in the message, but it was not doing so
2563 when it took $return_path from a Return-Path: header line. It now does.
256522. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2566 with a valid header line field name (a series of printing characters
2567 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
256923. Changed "disc" in the source to "disk" to conform to the documentation and
2570 the book and for uniformity.
257224. Ignore Sendmail's -Ooption=value command line item.
257425. When execve() failed while trying to run a command in a pipe transport,
2575 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2576 could be confused with a return value of 69 from the command itself. This
2577 has been changed to 127, the value the shell returns if it is asked to run
2578 a non-existent command. The wording for the related log line suggests a
2579 non-existent command as the problem.
258126. If received_header_text expands to an empty string, do not add a Received:
2582 header line to the message. (Well, it adds a token one on the spool, but
2583 marks it "old" so that it doesn't get used or transmitted.)
258527. Installed eximstats 1.28 (addition of -nt option).
258728. There was no check for failure on the call to getsockname() in the daemon
2588 code. This can fail if there is a shortage of resources on the system, with
2589 ENOMEM, for example. A temporary error is now given on failure.
259129. Contrary to the C standard, it seems that in some environments, the
2592 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2593 program. Exim now does this explicitly; it affects the formatting of
2594 timestamps using strftime().
259630. If exiqsumm was given junk data, it threw up some uninitialized variable
2597 complaints. I've now initialized all the variables, to avoid this.
259932. Header lines added by a system filter were not being "seen" during
2600 transport-time rewrites.
260233. The info_callback() function passed to OpenSSL is set up with type void
2603 (*)(SSL *, int, int), as described somewhere. However, when calling the
2604 function (actually a macro) that sets it up, the type void(*)() is
2605 expected. I've put in a cast to prevent warnings from picky compilers.
260734. If a DNS black list lookup found a CNAME record, but there were no A
2608 records associated with the domain it pointed at, Exim crashed.
261035. If a DNS black list lookup returned more than one A record, Exim ignored
2611 all but the first. It now scans all returned addresses if a particular IP
2612 value is being sought. In this situation, the contents of the
2613 $dnslist_value variable are a list of all the addresses, separated by a
2614 comma and a space.
261636. Tightened up the rules for host name lookups using reverse DNS. Exim used
2617 to accept a host name and all its aliases if the forward lookup for any of
2618 them yielded the IP address of the incoming connection. Now it accepts only
2619 those names whose forward lookup yields the correct IP address. Any other
2620 names are discarded. This closes a loophole whereby a rogue DNS
2621 administrator could create reverse DNS records to break through a
2622 wildcarded host restriction in an ACL.
262437. If a user filter or a system filter that ran in a subprocess used any of
2625 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2626 the wrong values were passed to the pipe command ($thisaddress had the
2627 value of $0, $0 had the value of $1, etc). This bug was introduced by
2628 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
263038. Improved the line breaking for long SMTP error messages from ACLs.
2631 Previously, if there was no break point between 40 and 75 characters, Exim
2632 left the rest of the message alone. Two changes have been made: (a) I've
2633 reduced the minimum length to 35 characters; (b) if it can't find a break
2634 point between 35 and 75 characters, it looks ahead and uses the first one
2635 that it finds. This may give the occasional overlong line, but at least the
2636 remaining text gets split now.
263839. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2639 file descriptors might be low, and that setting 1000 would always raise it.
2640 It turns out that in some environments, the limit is already over 1000 and
2641 that lowering it causes trouble. So now Exim takes care not to decrease it.
264340. When delivering a message, the value of $return_path is set to $sender_
2644 address at the start of routing (routers may change the value). By an
2645 oversight, this default was not being set up when an address was tested by
2646 -bt or -bv, which affected the outcome if any router or filter referred to
2647 $return_path.
264941. The idea of the "warn" ACL verb is that it adds a header or writes to the
2650 log only when "message" or "log_message" are set. However, if one of the
2651 conditions was an address verification, or a call to a nested ACL, the
2652 messages generated by the underlying test were being passed through. This
2653 no longer happens. The underlying message is available in $acl_verify_
2654 message for both "message" and "log_message" expansions, so it can be
2655 passed through if needed.
265742. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2658 new expansion $bh_ to give the encoded byte string without charset
2659 translation. Translation happens only if iconv() is available; HAVE_ICONV
2660 indicates this at build time. HEADERS_CHARSET gives the charset to
2661 translate to; headers_charset can change it in the configuration, and
2662 "headers charset" can change it in an individual filter file.
266443. Now that we have a default RFC 2047 charset (see above), the code in Exim
2665 that creates RFC 2047 encoded "words" labels them as that charset instead
2666 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2667 expansion operator; (ii) when Exim creates a From: line for a local
2668 message; (iii) when a header line is rewritten to include a "phrase" part.
267044. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2671 buggy, causing it to skip the first lines of messages whose message ID
2672 ended in 'D'. This would not have bitten before Exim release 4.14, because
2673 message IDs were unlikely to end in 'D' before then. The effect was to have
2674 incorrect size information for certain domains.
267645. #include "config.h" was missing at the start of the crypt16.c module. This
2677 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2678 noticed.
268046. If there was a timeout during a "random" callout check, Exim treated it as
2681 a failure of the random address, and carried on sending RSET and the real
2682 address. If the delay was just some slowness somewhere, the response to the
2683 original RCPT would be taken as a response to RSET and so on, causing
2684 mayhem of various kinds.
268647. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2687 when I implemented it. It didn't allow for the fact that some option values
2688 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2689 the right test for positive values.
269148. Domain names in DNS records are case-independent. Exim always looks them up
2692 in lower case. Some resolvers return domain names in exactly the case they
2693 appear in the zone file, that is, they may contain uppercase letters. Not
2694 all resolvers do this - some return always lower case. Exim was treating a
2695 change of case by a resolver as a change of domain, similar to a widening
2696 of a domain abbreviation. This triggered its re-routing code and so it was
2697 trying to route what was effectively the same domain again. This normally
2698 caused routing to fail (because the router wouldn't handle the domain
2699 twice). Now Exim checks for this case specially, and just changes the
2700 casing of the domain that it ultimately uses when it transmits the message
2701 envelope.
270349. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2704 module.
270650. If a filter generated a file delivery with a non-absolute name (possible if
2707 no home directory exists for the router), the forbid_file option was not
2708 forbidding it.
271051. Added '&' feature to dnslists, to provide bit mask matching in addition to
2711 the existing equality matching.
271352. Exim was using ints instead of ino_t variables in some places where it was
2714 dealing with inode numbers.
271653. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2717 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2718 called TMPDIR, and if it finds it is different, it changes its value.
272054. The smtp_printf() function is now made available to local_scan() so
2721 additional output lines can be written before returning. There is also an
2722 smtp_fflush() function to enable the detection of a dropped connection.
2723 The variables smtp_input and smtp_batched_input are exported to
2724 local_scan().
272655. Changed the default runtime configuration: the message "Unknown user"
2727 has been removed from the ACL, and instead placed on the localuser router,
2728 using the cannot_route_message feature. This means that any verification
2729 failures that generate their own messages won't get overridden. Similarly,
2730 the "Unrouteable address" message that was in the ACL for unverifiable
2731 relay addresses has also been removed.
273356. Added hosts_avoid_esmtp to the smtp transport.
273557. The exicyclog script was not checking for the esoteric option
2736 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2737 will work only if exicyclog is run under the appropriate euid.
273958. Following a discussion on the list, the rules by which Exim recognises line
2740 endings on incoming messages have been changed. The -dropcr and drop_cr
2741 options are now no-ops, retained only for backwards compatibility. The
2742 following line terminators are recognized: LF CRLF CR. However, special
2743 processing applies to CR:
2745 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2746 nor a local message in the state where . is a terminator.
2748 (ii) If a bare CR is encountered in a header line, an extra space is added
2749 after the line terminator so as not to end the header. The reasoning
2750 behind this is that bare CRs in header lines are most likely either
2751 to be mistakes, or people trying to play silly games.
275359. The size of a message, as listed by "-bp" or in the Exim monitor window,
2754 was being incorrectly given as 18 bytes larger than it should have been.
2755 This is a VOB (very old bug).
275760. This may never have affected anything current, but just in case it has:
2758 When the local host is found other than at the start of a list of hosts,
2759 the local host, those with the same MX, and any that follow, are discarded.
2760 When the list in question was part of a longer list of hosts, the following
2761 hosts (not currently being processed) were also being discarded. This no
2762 longer happens. I'm not sure if this situation could ever has previously
2763 arisen.
276561. Added the "/MX" feature to lists of hosts in the manualroute and query
2766 program routers.
276862. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2769 header. This is something that is recommended in a new Internet Draft, and
2770 is something that is documented as being done by Sendmail. There are two
2771 possible values. For messages generated by the autoreply transport, Exim
2772 adds:
2774 Auto-Submitted: auto-replied
2776 whereas for all other generated messages (e.g. bounces) it adds
2778 Auto-Submitted: auto-generated
278063. The "personal" condition in filters now includes a test for the
2781 Auto-Submitted: header. If it contains the string "auto-" the message it
2782 not considered personal.
278464. Added rcpt_include_affixes as a generic transport option.
278665. Added queue_only_override (default true).
278866. Added the syslog_duplication option.
279067. If what should have been the first header line of a message consisted of
2791 a space followed by a colon, Exim was mis-interpreting it as a header line.
2792 It isn't of course - it is syntactically invalid and should therefore be
2793 treated as the start of the message body. The misbehaviour could have
2794 caused a number of strange effects, including loss of data in subsequent
2795 header lines, and spool format errors.
279768. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2798 client host had authenticated. This control can now be exercised by an ACL
2799 for more flexibility.
280169. By default, callouts do not happen when testing with -bh. There is now a
2802 variant, -bhc, which does actually run the callout code, including
2803 consulting and updating the callout cache.
280570. Added support for saslauthd authentication, courtesy of Alexander
2806 Sabourenkov.
280871. If statvfs() failed on the spool or log directories while checking their
2809 size for availability, Exim confusingly gave the error "space shortage".
2810 Furthermore, in debugging mode it crashed with a floating point exception.
2811 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2812 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2813 serious problem, Exim now writes to the main and panic logs when this
2814 happens, with details of the failure. It then refuses to accept the
2815 incoming message, giving the message "spool directory problem" or "log
2816 directory problem" with a 421 code for SMTP messages.
281872. When Exim is about to re-exec itself, it ensures that the file descriptors
2819 0, 1, and 2 exist, because some OS complain for execs without them (see
2820 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2821 descriptors. However, the code omitted to check that the open succeeded,
2822 causing mysterious errors if for some reason the permissions on /dev/null
2823 got screwed. Now Exim writes a message to the main and panic logs, and
2824 bombs out if it can't open /dev/null.
282673. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2827 interact so that it is all more flexible. It is supposed to remain
2828 backwards compatible. Also added extra_local_interfaces.
283074. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2831 to bomb out with an assertion failure - to the client this appears as a
2832 connection drop. This problem occurs in the part of the code that was taken
2833 from the Samba project. Fortunately, the assertion is in a very simple
2834 function, so I have fixed this by reproducing the function inline in the
2835 one place where it is called, and arranging for authentication to fail
2836 instead of killing the process with assert().
283875. The SPA client code was not working when the server requested OEM rather
2839 than Unicode encoding.
284176. Added code to make require_files with a specific uid setting more usable in
2842 the case where statting the file as root fails - usually a non-root-mounted
2843 NFS file system. When this happens and the failure is EACCES, Exim now
2844 forks a subprocess and does the per-uid checking as the relevant uid.
284677. Added process_log_path.
284878. If log_file_path was not explicitly set, a setting of check_log_space or
2849 check_log_inodes was ignored.
285179. If a space check for the spool or log partitions fails, the incident is now
2852 logged. Of course, in the latter case the data may get lost...
285480. Added the %p formatting code to string_format() so that it can be used to
2855 print addresses in debug_print(). Adjusted all the address printing in the
2856 debugging in store.c to use %p rather than %d.
285881. There was a concern that a line of code in smtp_in.c could overflow a
2859 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2860 initially expressed, the concern was not well-founded, because trailing
2861 spaces are removed early. However, if the trailing spaces were followed by
2862 a NULL, they did not get removed, so the overflow was possible. Two fixes
2863 were applied:
2865 (a) I re-wrote the offending code in a cleaner fashion.
2866 (b) If an incoming SMTP command contains a NULL character, it is rejected
2867 as invalid.
286982. When Exim changes uid/gid to the Exim user at daemon start time, it now
2870 runs initgroups(), so that if the Exim user is in any additional groups,
2871 they will be used during message reception.
2874Exim version 4.20
2877The change log for 4.20 and earlier releases has been archived.