(1) Fixed the cipher preference order for GnuTLS client usage.
[exim.git] / doc / doc-txt / ChangeLog
26dd5a95 1$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.48 2004/12/21 09:26:31 ph10 Exp $
3Change log file for Exim from version 4.21
f7b63901 6Exim version 4.50
9 1. Minor wording change to the doc/README.SIEVE file.
139059f6 11 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
5fe762f6 12 computation of the current number of files was incorrect.
495ae4b0 13
14 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
15 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
16 place.
18 4. Give more explanation in the error message when the command for a transport
19 filter fails to execute.
21 5. There are several places where Exim runs a non-Exim command in a
22 subprocess. The SIGUSR1 signal should be disabled for these processes. This
23 was being done only for the command run by the queryprogram router. It is
24 now done for all such subprocesses. The other cases are: ${run, transport
25 filters, and the commands run by the lmtp and pipe transports.
27 6. Added CONFIGURE_GROUP build-time option.
29 7. Some older OS have a limit of 256 on the maximum number of file
30 descriptors. Exim was using setrlimit() to set 1000 as a large value
31 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
32 systems. I've change it so that if it can't get 1000, it tries for 256.
35edf2ff 33
34 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
35 was an oversight, and furthermore, ever since the addition of extra
36 controls (e.g. 4.43/32), the checks on when to allow different forms of
37 "control" were broken. There should now be diagnostics for all cases when a
38 control that does not make sense is encountered.
40 9. Added the /retain_sender option to "control=submission".
4210. $recipients is now available in the predata ACL (oversight).
4411. Tidy the search cache before the fork to do a delivery from a message
45 received from the command line. Otherwise the child will trigger a lookup
46 failure and thereby defer the delivery if it tries to use (for example) a
47 cached ldap connection that the parent has called unbind on.
4912. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
50 of $address_data from the recipient verification was clobbered by the
51 sender verification.
5313. The value of address_data from a sender verification is now available in
54 $sender_address_data in subsequent conditions in the ACL statement.
5614. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
5815. Added a new option "connect=<time>" to callout options, to set a different
59 connection timeout.
6116. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
62 was its contents. (It was OK if the option was not defined at all.)
6417. A "Completed" log line is now written for messages that are removed from
65 the spool by the -Mrm option.
6718. New variables $sender_verify_failure and $recipient_verify_failure contain
68 information about exactly what failed.
7019. Added -dd to debug only the daemon process.
7220. Incorporated Michael Haardt's patch to ldap.c for improving the way it
73 handles timeouts, both on the server side and network timeouts. Renamed the
74 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
7621. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
77 It is now set to "smtps".
7922. $host_address is now set to the target address during the checking of
80 ignore_target_hosts.
8223. When checking ignore_target_hosts for an ipliteral router, no host name was
83 being passed; this would have caused $sender_host_name to have been used if
84 matching the list had actually called for a host name (not very likely,
85 since this list is usually IP addresses). A host name is now passed as
86 "[x.x.x.x]".
8824. Changed the calls that set up the SIGCHLD handler in the daemon to use the
89 code that specifies a non-restarting handler (typically sigaction() in
90 modern systems) in an attempt to fix a rare and obscure crash bug.
9225. Narrowed the window for a race in the daemon that could cause it to ignore
93 SIGCHLD signals. This is not a major problem, because they are used only to
94 wake it up if nothing else does.
9626. A malformed maildirsize file could cause Exim to calculate negative values
97 for the mailbox size or file count. Odd effects could occur as a result.
98 The maildirsize information is now recalculated if the size or filecount
99 end up negative.
10127. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
102 support for a long time. Removed HAVE_SYS_VFS_H.
10428. Installed the latest version of exipick from John Jetmore.
10629. In an address list, if the pattern was not a regular expression, an empty
107 subject address (from a bounce message) matched only if the pattern was an
108 empty string. Non-empty patterns were not even tested. This was the wrong
109 because it is perfectly reasonable to use an empty address as part of a
110 database query. An empty address is now tested by patterns that are
111 lookups. However, all the other forms of pattern expect the subject to
112 contain a local part and a domain, and therefore, for them, an empty
113 address still always fails if the pattern is not itself empty.
11530. Exim went into a mad DNS loop when attempting to do a callout where the
116 host was specified on an smtp transport, and looking it up yielded more
117 than one IP address.
11931. Re-factored the code for checking spool and log partition space into a
120 function that finds that data and another that does the check. The former
121 is then used to implement four new variables: $spool_space, $log_space,
122 $spool_inodes, and $log_inodes.
12432. The RFC2047 encoding function was originally intended for short strings
125 such as real names; it was not keeping to the 75-character limit for
126 encoded words that the RFC imposes. It now respects the limit, and
127 generates multiple encoded words if necessary. To be on the safe side, I
128 have increased the buffer size for the ${rfc2047: expansion operator from
129 1024 to 2048 bytes.
13133. It is now permitted to omit both strings after an "if" condition; if the
132 condition is true, the result is "true". As before, when the second string
133 is omitted, a false condition yields an empty string. This makes it less
134 cumbersome to write custom ACL and router conditions.
13634. Failure to deliver a bounce message always caused it to be frozen, even if
137 there was an errors_to setting on the router. The errors_to setting is now
138 respected.
14035. If an IPv6 address is given for -bh or -bhc, it is now converted to the
141 canonical form (fully expanded) before being placed in
142 $sender_host_address.
14436. The table in the code that translates DNS record types into text (T_A to
145 "A" for instance) was missing entries for NS and CNAME. It is just possible
146 that this could have caused confusion if both these types were looked up
147 for the same domain, because the text type is used as part of Exim's
148 per-process caching. But the chance of anyone hitting this buglet seems
149 very small.
15137. The dnsdb lookup has been extended in a number of ways.
153 (1) There is a new type, "zns", which walks up the domain tree until it
154 finds some nameserver records. It should be used with care.
156 (2) There is a new type, "mxh", which is like "mx" except that it returns
157 just the host names, not the priorities.
159 (3) It is now possible to give a list of domains (or IP addresses) to be
160 looked up. The behaviour when one of the lookups defers can be
161 controlled by a keyword.
7bb56e1f 162
ea3bc19b 163 (4) It is now possible to specify the separator character for use when
7bb56e1f 164 multiple records are returned.
33397d19 165
16638. The dnslists ACL condition has been extended: it is now possible to supply
167 a list of IP addresses and/or domains to be looked up in a particular DNS
168 domain.
17039. Added log_selector=+queue_time_overall.
17240. When running the queue in the test harness, wait just a tad after forking a
173 delivery process, to get repeatability of debugging output.
17541. Include certificate and key file names in error message when GnuTLS fails
176 to set them up, because the GnuTLS error message doesn't include the name
177 of the failing file when there is a problem reading it.
17942. Allow both -bf and -bF in the same test run.
18143. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
18344. The "Exiscan patch" is now merged into the mainline Exim source.
18545. Sometimes the final signoff response after QUIT could fail to get
186 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
187 < 0 before doing a fflush(). This bug looks as though it goes back to the
188 introduction of TLS in release 3.20, but "sometimes" must have been rare
189 because the tests only now provoked it.
19146. Reset the locale to "C" after calling embedded Perl, in case it was changed
192 (this can affect the format of dates).
19447. exim_tidydb, when checking for the continued existence of a message for
195 which it has found a message-specific retry record, was not finding
196 messages that were in split spool directories. Consequently, it was
197 deleting retry records that should have stayed in existence.
19948. Steve fixed some bugs in eximstats.
20149. The SPA authentication driver was not abandoning authentication and moving
202 on to the next authenticator when an expansion was forced to fail,
203 contradicting the general specification for all authenticators. Instead it
204 was generating a temporary error. It now behaves as specified.
20650. The default ordering of permitted cipher suites for GnuTLS was pessimal
207 (the order specifies the preference for clients). The order is now AES256,
208 AES128, 3DES, ARCFOUR128.
211Exim version 4.43
214 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
215 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
216 Now it returns an integer. A number of calls were still expecting a T/F
217 return. Fortuitously, in all cases, the tests worked in OK situations,
218 which is the norm. However, things would have gone wrong on any write
219 failures on the smtp file descriptor. This function is used when sending
220 messages over SMTP and also when doing verify callouts.
222 2. When Exim is called to do synchronous delivery of a locally submitted
223 message (the -odf or -odi options), it no longer closes stderr before doing
224 the delivery.
226 3. Implemented the mua_wrapper option.
228 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
230 5. Implemented the functions header_remove(), header_testname(),
231 header_add_at_position(), and receive_remove_recipient(), and exported them
232 to local_scan().
234 6. If an ACL "warn" statement specified the addition of headers, Exim already
235 inserted X-ACL-Warn: at the start if there was no header name. However, it
236 was not making this test for the second and subsequent header lines if
237 there were newlines in the string. This meant that an invalid header could
238 be inserted if Exim was badly configured.
240 7. Allow an ACL "warn" statement to add header lines at the start or after all
241 the Received: headers, as well as at the end.
243 8. Added the rcpt_4xx retry error code.
245 9. Added postmaster_mailfrom=xxx to callout verification option.
24710. Added mailfrom=xxxx to the callout verification option, for verify=
248 header_sender only.
25011. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
251 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
25312. Inserted some casts to stop certain compilers warning when using pointer
254 differences as field lengths or precisions in printf-type calls (mostly
255 affecting debugging statements).
25713. Added optional readline() support for -be (dynamically loaded).
25914. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
260 same clock tick as a message's arrival, so that its received time was the
261 same as the "first fail" time on the retry record, and that message
262 remained on the queue past the ultimate address timeout, every queue runner
263 would try a delivery (because it was past the ultimate address timeout) but
264 after another failure, the ultimate address timeout, which should have then
265 bounced the address, did not kick in. This was a "< instead of <=" error;
266 in most cases the first failure would have been in the next clock tick
267 after the received time, and all would be well.
26915. The special items beginning with @ in domain lists (e.g. @mx_any) were not
270 being recognized when the domain list was tested by the match_domain
271 condition in an expansion string.
27316. Added the ${str2b64: operator.
27517. Exim was always calling setrlimit() to set a large limit for the number of
276 processes, without checking whether the existing limit was already
277 adequate. (It did check for the limit on file descriptors.) Furthermore,
278 errors from getrlimit() and setrlimit() were being ignored. Now they are
279 logged to the main and panic logs, but Exim does carry on, to try to do its
280 job under whatever limits there are.
28218. Imported PCRE 5.0.
28419. Trivial typo in log message " temporarily refused connection" (the leading
285 space).
28720. If the log selector return_path_on_delivery was set and an address was
288 redirected to /dev/null, the delivery process crashed because it assumed
289 that a return path would always be set for a "successful" delivery. In this
290 case, the whole delivery is bypassed as an optimization, and therefore no
291 return path is set.
29321. Internal re-arrangement: the function for sending a challenge and reading
294 a response while authentication was assuming a zero-terminated challenge
295 string. It's now changed to take a pointer and a length, to allow for
296 binary data in such strings.
29822. Added the cyrus_sasl authenticator (code supplied by MBM).
30023. Exim was not respecting finduser_retries when seeking the login of the
301 uid under which it was called; it was always trying 10 times. (The default
302 setting of finduser_retries is zero.) Also, it was sleeping after the final
303 failure, which is pointless.
30524. Implemented tls_on_connect_ports.
30725. Implemented acl_smtp_predata.
30926. If the domain in control=submission is set empty, Exim assumes that the
310 authenticated id is a complete email address when it generates From: or
311 Sender: header lines.
31327. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
314 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
315 chown and chgrp in /bin and hostname in /usr/bin.
31728. Exim was keeping the "process log" file open after each use, just as it
318 does for the main log. This opens the possibility of it remaining open for
319 long periods when the USR1 signal hits a daemon. Occasional processlog
320 errors were reported, that could have been caused by this. Anyway, it seems
321 much more sensible not to leave this file open at all, so that is what now
322 happens.
32429. The long-running daemon process does not normally write to the log once it
325 has entered its main loop, and it closes the log before doing so. This is
326 so that log files can straightforwardly be renamed and moved. However,
327 there are a couple of unusual error situations where the daemon does write
328 log entries, and I had neglected to close the log afterwards.
33030. The text of an SMTP error response that was received during a remote
331 delivery was being truncated at 512 bytes. This is too short for some of
332 the long messages that one sometimes sees. I've increased the limit to
333 1024.
33531. It is now possible to make retry rules that apply only when a message has a
336 specific sender, in particular, an empty sender.
33832. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
339 it possible to be selective about when SMTP synchronization is enforced.
34133. Added "control = caseful_local_part" and "control = "caselower_local_part".
34332. Implemented hosts_connection_nolog.
34533. Added an ACL for QUIT.
34734. Setting "delay_warning=" to disable warnings was not working; it gave a
348 syntax error.
35035. Added mailbox_size and mailbox_filecount to appendfile.
35236. Added control = no_multiline_responses to ACLs.
35437. There was a bug in the logic of the code that waits for the clock to tick
355 in the case where the clock went backwards by a substantial amount such
356 that the microsecond fraction of "now" was more than the microsecond
357 fraction of "then" (but the whole seconds number was less).
35938. Added support for the libradius Radius client library this is found on
360 FreeBSD (previously only the radiusclient library was supported).
363Exim version 4.42
366 1. When certain lookups returned multiple values in the form name=value, the
367 quoting of the values was not always being done properly. Specifically:
368 (a) If the value started with a double quote, but contained no whitespace,
369 it was not quoted.
370 (b) If the value contained whitespace other than a space character (i.e.
371 tabs or newlines or carriage returns) it was not quoted.
372 This fix has been applied to the mysql and pgsql lookups by writing a
373 separate quoting function and calling it from the lookup code. The fix
374 should probably also be applied to nisplus, ibase and oracle lookups, but
375 since I cannot test any of those, I have not disturbed their existing code.
377 2. A hit in the callout cache for a specific address caused a log line with no
378 reason for rejecting RCPT. Now it says "Previous (cached) callout
379 verification failure".
381 3. There was an off-by-one bug in the queryprogram router. An over-long
382 return line was truncated at 256 instead of 255 characters, thereby
383 overflowing its buffer with the terminating zero. As well as fixing this, I
384 have increased the buffer size to 1024 (and made a note to document this).
386 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
387 when Exim is waiting for an SMTP response from a remote server, Exim
388 restarts its select() call on the socket, thereby resetting its timeout.
389 This is not a problem when such interrupts are rare. Somebody set up a cron
390 job to run exiwhat every 2 minutes, which is less than the normal select()
391 timeout (5 or 10 minutes). This meant that the select() timeout never
392 kicked in because it was always reset. I have fixed this by comparing the
393 time when an interrupt arrives with the time at the start of the first call
394 to select(). If more time than the timeout has elapsed, the interrupt is
395 treated as a timeout.
397 5. Some internal re-factoring in preparation for the addition of Sieve
398 extensions (by MH). In particular, the "personal" test is moved to a
399 separate function, and given an option for scanning Cc: and Bcc: (which is
400 not set for Exim filters).
402 6. When Exim created an email address using the login of the caller as the
403 local part (e.g. when creating a From: or Sender: header line), it was not
404 quoting the local part when it contained special characters such as @.
406 7. Installed new OpenBSD configuration files.
408 8. Reworded some messages for syntax errors in "and" and "or" conditions to
409 try to make them clearer.
411 9. Callout options, other than the timeout value, were being ignored when
412 verifying sender addresses in header lines. For example, when using
414 verify = header_sender/callout=no_cache
416 the cache was (incorrectly) being used.
41810. Added a missing instance of ${EXE} to the exim_install script; this affects
419 only the Cygwin environment.
42111. When return_path_on_delivery was set as a log selector, if different remote
422 addresses in the same message used different return paths and parallel
423 remote delivery occurred, the wrong values would sometimes be logged.
424 (Whenever a remote delivery process finished, the return path value from
425 the most recently started remote delivery process was logged.)
42712. RFC 3848 specifies standard names for the "with" phrase in Received: header
428 lines when AUTH and/or TLS are in use. This is the "received protocol"
429 field. Exim used to use "asmtp" for authenticated SMTP, without any
430 indication (in the protocol name) for TLS use. Now it follows the RFC and
431 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
432 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
433 names appear in log lines as well as in Received: header lines.
43513. Installed MH's patches for Sieve to add the "copy" and "vacation"
436 extensions, and comparison tests, and to fix some bugs.
43814. Changes to the "personal" filter test:
440 (1) The test was buggy in that it was just doing the equivalent of
441 "contains" tests on header lines. For example, if a user's address was
442 anne@some.where, the "personal" test would incorrectly be true for
444 To: susanne@some.where
446 This test is now done by extracting each address from the header in turn,
447 and checking the entire address. Other tests that are part of "personal"
448 are now done using regular expressions (for example, to check local parts
449 of addresses in From: header lines).
451 (2) The list of non-personal local parts in From: addresses has been
452 extended to include "listserv", "majordomo", "*-request", and "owner-*",
453 taken from the Sieve specification recommendations.
455 (3) If the message contains any header line starting with "List-" it is
456 treated as non-personal.
458 (4) The test for "circular" in the Subject: header line has been removed
459 because it now seems ill-conceived.
46115. Minor typos in src/EDITME comments corrected.
46316. Installed latest exipick from John Jetmore.
46517. If headers_add on a router specified a text string that was too long for
466 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
467 of string_sprintf() is now avoided.
46918. $message_body_size was not set (it was always zero) when running the DATA
470 ACL and the local_scan() function.
47219. For the "mail" command in an Exim filter, no default was being set for
473 the once_repeat time, causing a random time value to be used if "once" was
474 specified. (If the value happened to be <= 0, no repeat happened.) The
475 default is now 0s, meaning "never repeat". The "vacation" command was OK
476 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
477 (I found it when inspecting the code).
47920. There is now an overall timeout for performing a callout verification. It
480 defaults to 4 times the callout timeout, which applies to individual SMTP
481 commands during the callout. The overall timeout applies when there is more
482 than one host that can be tried. The timeout is checked before trying the
483 next host. This prevents very long delays if there are a large number of
484 hosts and all are timing out (e.g. when the network connections are timing
485 out). The value of the overall timeout can be changed by specifying an
486 additional sub-option for "callout", called "maxwait". For example:
488 verify = sender/callout=5s,maxwait=20s
49021. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
491 to the end before writing, but this should make it even safer).
49322. Exim was forgetting that it had advertised PIPELINING for the second and
494 subsequent messages on an SMTP connection. It was also not resetting its
495 memory on STARTTLS and an internal HELO.
49723. When Exim logs an SMTP synchronization error within a session, it now
498 records whether PIPELINING has been advertised or not.
50024. Added 3 instances of "(long int)" casts to time_t variables that were being
501 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
502 rather than long int.
50425. Installed the latest Cygwin configuration files from the Cygwin maintainer.
50626. Added the never_mail option to autoreply.
509Exim version 4.41
512 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
513 crash if the getsockname() call failed; this can happen if a connection is
514 closed very soon after it is established. The problem was simply in the
515 order in which certain operations were done, causing Exim to try to write
516 to the SMTP stream before it had set up the file descriptor. The bug has
517 been fixed by making things happen in the correct order.
520Exim version 4.40
523 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
524 before the connection was closed, thus losing the rejection response.
526 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
527 some early Solaris releases, but causes trouble in current releases where
528 socklen_t is defined.
530 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
531 always exist.
533 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
534 configured.
536 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
537 that releasing the top of it at the end releases what was used for sub-
538 expansions (unless the block got too big). However, discard this block if
539 the first thing is a variable or header, so that we can use its block when
540 it is dynamic (useful for very large $message_headers, for example).
542 6. Lookups now cache *every* query, not just the most recent. A new, separate
543 store pool is used for this. It can be recovered when all lookup caches are
544 flushed. Lookups now release memory at the end of their result strings.
545 This has involved some general refactoring of the lookup sources.
547 7. Some code has been added to the store_xxx() functions to reduce the amount
548 of flapping under certain conditions.
550 8. log_incoming_interface used to affect only the <= reception log lines. Now
551 it causes the local interface and port to be added to several more SMTP log
552 lines, for example "SMTP connection from", and rejection lines.
554 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
55610. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
55811. If $host_data was set by virtue of a hosts lookup in an ACL, its value
559 could be overwritten at the end of the current message (or the start of a
560 new message if it was set in a HELO ACL). The value is now preserved for
561 the duration of the SMTP connection.
56312. If a transport had a headers_rewrite setting, and a matching header line
564 contained an unqualified address, that address was qualified, even if it
565 did not match any rewriting rules. The underlying bug was that the values
566 of the flags that permit the existence of unqualified sender and recipient
567 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
568 non-local messages, and by -bnq for local messages) were not being
569 preserved with the message after it was received.
57113. When Exim was logging an SMTP synchronization error, it could sometimes log
572 "next input=" as part of the text comprising the host identity instead of
573 the correct text. The code was using the same buffer for two different
574 strings. However, depending on which order the printing function evaluated
575 its arguments, the bug did not always show up. Under Linux, for example, my
576 test suite worked just fine.
57814. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
579 doesn't work with some older versions of Perl. It has been changed to "my",
580 which in any case is probably the better facility to use.
58215. A really picky compiler found some instances of statements for creating
583 error messages that either had too many or two few arguments for the format
584 string.
58616. The size of the buffer for calls to the DNS resolver has been increased
587 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
588 for addresses that have a lot of PTR records. This alleviates a problem; it
589 does not fully solve it.
59117. A dnsdb lookup for PTR records that receives more data than will fit in the
592 buffer now truncates the list and logs the incident, which is the same
593 action as happens when Exim is looking up a host name and its aliases.
594 Previously in this situation something unpredictable would happen;
595 sometimes it was "internal error: store_reset failed".
59718. If a server dropped the connection unexpectedly when an Exim client was
598 using GnuTLS and trying to read a response, the client delivery process
599 crashed while trying to generate an error log message.
60119. If a "warn" verb in an ACL added multiple headers to a message in a single
602 string, for example:
604 warn message = H1: something\nH2: something
606 the text was added as a single header line from Exim's point of view
607 though it ended up OK in the delivered message. However, searching for the
608 second and subsequent header lines using $h_h2: did not work. This has been
609 fixed. Similarly, if a system filter added multiple headers in this way,
610 the routers could not see them.
61220. Expanded the error message when iplsearch is called with an invalid key to
613 suggest using net-iplsearch in a host list.
61521. When running tests using -bh, any delays imposed by "delay" modifiers in
616 ACLs are no longer actually imposed (and a message to that effect is
617 output).
61922. If a "gecos" field in a passwd entry contained escaped characters, in
620 particular, if it contained a \" sequence, Exim got it wrong when building
621 a From: or a Sender: header from that name. A second bug also caused
622 incorrect handling when an unquoted " was present following a character
623 that needed quoting.
62523. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
626 was not being matched caselessly.
62824. Arranged for all hyphens in the exim.8 source to be escaped with
629 backslashes.
63125. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
632 properly. Recipient callout cache records were still being keyed to include
633 the sender, even when use_sender was set false. This led to far more
634 callouts that were necessary. The sender is no longer included in the key
635 when use_sender is false.
63726. Added "control = submission" modifier to ACLs.
63927. Added the ${base62d: operator to decode base 62 numbers.
64128. dnsdb lookups can now access SRV records.
64329. CONFIGURE_OWNER can be set at build time to define an alternative owner for
644 the configuration file.
64630. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
647 (-v) mode. This makes the output for a verbose queue run more intelligible.
64931. Added a use_postmaster feature to recipient callouts.
65132. Added the $body_zerocount variable, containing the number of binary zero
652 bytes in the message body.
65433. The time of last modification of the "new" subdirectory is now used as the
655 "mailbox time last read" when there is a quota error for a maildir
656 delivery.
65834. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
66035. Added +ignore_unknown as a special item in host lists.
66236. Code for decoding IPv6 addresses in host lists is now included, even if
663 IPv6 support is not being compiled. This fixes a bug in which an IPv6
664 address was recognized as an IP address, but was then not correctly decoded
665 into binary, causing unexpected and incorrect effects when compared with
666 another IP address.
669Exim version 4.34
672 1. Very minor rewording of debugging text in manualroute to say "list of
673 hosts" instead of "hostlist".
675 2. If verify=header_syntax was set, and a header line with an unqualified
676 address (no domain) and a large number of spaces between the end of the
677 name and the colon was received, the reception process suffered a buffer
678 overflow, and (when I tested it) crashed. This was caused by some obsolete
679 code that should have been removed. The fix is to remove it!
681 3. When running in the test harness, delay a bit after writing a bounce
682 message to get a bit more predictability in the log output.
684 4. Added a call to search_tidyup() just before forking a reception process. In
685 theory, someone could use a lookup in the expansion of smtp_accept_max_
686 per_host which, without the tidyup, could leave open a database connection.
688 5. Added the variables $recipient_data and $sender_data which get set from a
689 lookup success in an ACL "recipients" or "senders" condition, or a router
690 "senders" option, similar to $domain_data and $local_part_data.
692 6. Moved the writing of debug_print from before to after the "senders" test
693 for routers.
695 7. Change 4.31/66 (moving the time when the Received: is generated) caused
696 problems for message scanning, either using a data ACL, or using
697 local_scan() because the Received: header was not generated till after they
698 were called (in order to set the time as the time of reception completion).
699 I have revised the way this works. The header is now generated after the
700 body is received, but before the ACL or local_scan() are called. After they
701 are run, the timestamp in the header is updated.
704Exim version 4.33
707 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
708 before starting a queue runner without re-exec. This happened only when
709 deliver_drop_privilege was set or when the Exim user was set to root. The
710 effect of the bug was that timeouts during subsequent deliveries caused
711 crashes instead of being properly handled. The handler is now left at its
712 default (and expected) setting.
714 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
715 message, again when deliver_drop_privilege is set or Exim is run as root.
716 The bug described in (1) was not present in this case, but the tidying up
717 of the other signals was missing. I have made the two cases consistent.
719 3. The ignore_target_hosts setting on a manualroute router was being ignored
720 for hosts that were looked up using the /MX notation.
722 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
723 in domain lists.
725 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
726 operated on the sender address. After changing the $sender_address to <>
727 for the sender address verify, Exim was re-instated it as the original
728 (before rewriting) address, but remembering that it had rewritten it, so it
729 wasn't rewriting it again. This bug also had the effect of breaking the
730 sender address verification caching when the sender address was rewritten.
732 6. The ignore_target_hosts option was being ignored by the ipliteral router.
733 This has been changed so that if the ip literal address matches
734 ignore_target_hosts, the router declines.
736 7. Added expansion conditions match_domain, match_address, and match_local_
737 part (NOT match_host).
739 8. The placeholder for the Received: header didn't have a length field set.
741 9. Added code to Exim itself and to exim_lock to test for a specific race
742 condition that could lead to file corruption when using MBX delivery. The
743 issue is with the lockfile that is created in /tmp. If this file is removed
744 after a process has opened it but before that process has acquired a lock,
745 there is the potential for a second process to recreate the file and also
746 acquire a lock. This could lead to two Exim processes writing to the file
747 at the same time. The added code performs the same test as UW imapd; it
748 checks after acquiring the lock that its file descriptor still refers to
749 the same named file.
75110. The buffer for building added header lines was of fixed size, 8192 bytes.
752 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
753 when Exim is built.
75511. Added the smtp_active_hostname option. If used, this will typically be made
756 to depend on the incoming interface address. Because $interface_address is
757 not set up until the daemon has forked a reception process, error responses
758 that can happen earlier (such as "too many connections") no longer contain
759 a host name.
76112. If an expansion in a condition on a "warn" statement fails because a lookup
762 defers, the "warn" statement is abandoned, and the next ACL statement is
763 processed. Previously this caused the whole ACL to be aborted.
76513. Added the iplsearch lookup type.
76714. Added ident_timeout as a log selector.
76915. Added tls_certificate_verified as a log selector.
77116. Added a global option tls_require_ciphers (compare the smtp transport
772 option of the same name). This controls incoming TLS connections.
77417. I finally figured out how to make tls_require_ciphers do a similar thing
775 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
776 before starting the TLS session.
77818. Tabs are now shown as \t in -bP output.
78019. If the log selector return_path_on_delivery was set, Exim crashed when
781 bouncing a message because it had too many Received: header lines.
78320. If two routers both had headers_remove settings, and the first one included
784 a superfluous trailing colon, the final name in the first list and the
785 first name in the second list were incorrectly joined into one item (with a
786 colon in the middle).
789Exim version 4.32
792 1. Added -C and -D options to the exinext utility, mainly to make it easier
793 to include in the automated testing, but these could be helpful when
794 multiple configurations are in use.
796 2. The exinext utility was not formatting the output nicely when there was
797 an alternate port involved in the retry record key, nor when there was a
798 message id as well (for retries that were specific to a specific message
799 and a specific host). It was also confused by IPv6 addresses, because of
800 the additional colons they contain. I have fixed the IPv4 problem, and
801 patched it up to do a reasonable job for IPv6.
803 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
804 delivery, the log line now contains "pipelined" if PIPELINING was used.
806 4. An SMTP transport process used to panic and die if the bind() call to set
807 an explicit outgoing interface failed. This has been changed; it is now
808 treated in the same way as a connect() failure.
810 5. A reference to $sender_host_name in the part of a conditional expansion
811 that was being skipped was still causing a DNS lookup. This no longer
812 occurs.
814 6. The def: expansion condition was not recognizing references to header lines
815 that used bh_ and bheader_.
817 7. Added the _cache feature to named lists.
819 8. The code for checking quota_filecount in the appendfile transport was
820 allowing one more file than it should have been.
822 9. For compatibility with Sendmail, the command line option
824 -prval:sval
826 is equivalent to
828 -oMr rval -oMs sval
830 and sets the incoming protocol and host name (for trusted callers). The
831 host name and its colon can be omitted when only the protocol is to be set.
832 Note the Exim already has two private options, -pd and -ps, that refer to
833 embedded Perl. It is therefore impossible to set a protocol value of "d" or
834 "s", but I don't think that's a major issue.
83610. A number of refactoring changes to the code, none of which should affect
837 Exim's behaviour:
839 (a) The number of logging options was getting close to filling up the
840 32-bit word that was used as a bit map. I have split them into two classes:
841 those that are passed in the argument to log_write(), and those that are
842 only ever tested independently outside of that function. These are now in
843 separate 32-bit words, so there is plenty of room for expansion again.
844 There is no change in the user interface or the logging behaviour.
846 (b) When building, for example, log lines, the code previously used a
847 macro that called string_cat() twice, in order to add two strings. This is
848 not really sufficiently general. Furthermore, there was one instance where
849 it was actually wrong because one of the argument was used twice, and in
850 one call a function was used. (As it happened, calling the function twice
851 did not affect the overall behaviour.) The macro has been replaced by a
852 function that can join an arbitrary number of extra strings onto a growing
853 string.
855 (c) The code for expansion conditions now uses a table and a binary chop
856 instead of a serial search (which was left over from when there were very
857 few conditions). Also, it now recognizes conditions like "pam" even when
858 the relevant support is not compiled in: a suitably worded error message is
859 given if an attempt is made to use such a condition.
86111. Added ${time_interval:xxxxx}.
86312. A bug was causing one of the ddress fields not to be passed back correctly
864 from remote delivery subprocesses. The field in question was not being
865 subsequently used, so this caused to problems in practice.
86713. Added new log selectors queue_time and deliver_time.
86914. Might have fixed a bug in maildirsizefile handling that threw up
870 "unexpected character" debug warnings, and recalculated the data
871 unnecessarily. In any case, I expanded the warning message to give more
872 information.
87415. Added the message "Restricted characters in address" to the statements in
875 the default ACL that block characters like @ and % in local parts.
87716. Change 71 for release 4.31 proved to be much less benign that I imagined.
878 Three changes have been made:
880 (a) There was a serious bug; a negative response to MAIL caused the whole
881 recipient domain to be cached as invalid, thereby blocking all messages
882 to all local parts at the same domain, from all senders. This bug has
883 been fixed. The domain is no longer cached after a negative response to
884 MAIL if the sender used is not empty.
886 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
887 been restored.
889 (c) A new callout option, "use_sender" has been added for people who want
890 the modified behaviour.
893Exim version 4.31
896 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
897 Larry Rosenman.
899 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
900 indeed breaks things for older releases.
902 3. Added additional logging to the case where there is a problem reading data
903 from a filter that is running in a subprocess using a pipe, in order to
904 try to track down a specific problem.
906 4. Testing facility fudge: when running in the test harness and attempting
907 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
908 getting "No route to host". Convert this to a timeout.
910 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
911 warning.
913 6. Some OS don't have socklen_t but use size_t instead. This affects the
914 fifth argument of getsockopt() amongst other things. This is now
915 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
916 can be set for individual OS. I have set it for SunOS5, OSF1, and
917 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
918 some earlier ones do not.
920 7. Change 4.30/15 was not doing the test caselessly.
922 8. The standard form for an IPv6 address literal was being rejected by address
923 parsing in, for example, MAIL and RCPT commands. An example of this kind of
924 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
925 this, as well as the form without the "IPv6" on the front (but only when
926 address literals are enabled, of course).
928 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
93010. Exim crashed if a message with an empty sender address specified by -f
931 encountered a router with an errors_to setting. This could be provoked only
932 by a command such as
934 exim -f "" ...
936 where an empty string was supplied; "<>" did not hit this bug.
93811. Installed PCRE release 4.5.
94012. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
941 remained set. It is now erased.
94313. exiqgrep wasn't working on MacOS X because it didn't correctly compute
944 times from message ids (which are base 36 rather than the normal 62).
94614. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
947 were being counted as actual protocol errors, and logged if the log
948 selector +smtp_protocol_error was set. One cannot be perfect in this test,
949 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
950 and DATA following a set of rejected RCPTs do not count as protocol errors.
951 In other words, Exim assumes they were pipelined, though this may not
952 actually be the case. Of course, in all cases the client gets an
953 appropriate error code.
95515. If a lookup fails in an ACL condition, a message about the failure may
956 be available; it is used if testing the ACL cannot continue, because most
957 such messages specify what the cause of the deferral is. However, some
958 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
959 that caused an old message to be retained and used if a later statement
960 caused a defer, replacing the real cause of the deferral.
96216. If an IP address had so many PTR records that the DNS lookup buffer
963 was not large enough to hold them, Exim could crash while trying to process
964 the truncated data. It now detects and logs this case.
96617. Further to 4.21/58, another change has been made: if (and only if) the
967 first line of a message (the first header line) ends with CRLF, a bare LF
968 in a subsequent header line has a space inserted after it, so as not to
969 terminate the header.
97118. Refactoring: tidied an ugly bit of code in appendfile that copied data
972 unnecessarily, used atoi() instead of strtol(), and didn't check the
973 termination when getting file sizes from file names by regex.
97519. Completely re-implemented the support for maildirsize files, in the light
976 of a number of problems with the previous contributed implementation
977 (4.30/29). In particular:
979 . If the quota is zero, the maildirsize file is maintained, but no quota is
980 imposed.
982 . If the maildir directory does not exist, it is created before any attempt
983 to write a maildirsize file.
985 . The quota value in the file is just a cache; if the quota is changed in
986 the transport, the new value overrides.
988 . A regular expression is available for excluding directories from the
989 count.
99120. The autoreply transport checks the characters in options that define the
992 message's headers; it allows continued headers, but it was checking with
993 isspace() after an embedded newline instead of explicitly looking for a
994 space or a tab.
99621. If all the "regular" hosts to which an address was routed had passed their
997 expiry times, and had not reached their retry times, the address was
998 bounced, even if fallback hosts were defined. Now Exim should go on to try
999 the fallback hosts.
100122. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1002 equivalent code in the SMTP transport. Some hosts send humungous responses
1003 to HELO/EHLO, more than 1024 it seems.
100523. Refactoring: code in filter.c used (void *) for "any old type" but this
1006 gives compiler warnings in some environments. I've now done it "properly",
1007 using a union.
100924. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1010 (because of problems with the built-in one) was declared to return uschar *
1011 instead of char *, causing compiler failure.
101325. Fixed a file descriptor leak when processing alias/forward files.
101526. Fixed a minor format string issue in dbfn.c.
101727. Typo in exim.c: ("dmbnz" for "dbmnz").
101928. If a filter file refered to $h_xxx or $message_headers, and the headers
1020 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1021 become corrupted.
102329. When a sender address is verified, it is cached, to save repeating the test
1024 when there is more than one recipient in a message. However, when the
1025 verification involves a callout, it is possible for different callout
1026 options to be set for different recipients. It is too complicated to keep
1027 track of this in the cache, so now Exim always runs a verification when a
1028 callout is required, relying on the callout cache for the optimization.
1029 The overhead is duplication of the address routing, but this should not be
1030 too great.
103230. Fixed a bug in callout caching. If a RCPT command caused the sender address
1033 to be verified with callout=postmaster, and the main callout worked but the
1034 postmaster check failed, the verification correctly failed. However, if a
1035 subsequent RCPT command asked for sender verification *without* the
1036 postmaster check, incorrect caching caused this verification also to fail,
1037 incorrectly.
103931. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1040 it was not caching the DNS options (qualify_single, search_parents) that
1041 were used when the lookup failed. A subsequent lookup with different
1042 options therefore always gave the same answer, though there were cases
1043 where it should not have. (Example: a "domains = !$mx_any" option on a
1044 dnslookup router: the "domains" option is always processed without any
1045 widening, but the router might have qualify_single set.) Now Exim uses the
1046 cached value only when the same options are set.
104832. Added John Jetmore's "exipick" utility to the distribution.
105033. GnuTLS: When an attempt to start a TLS session fails for any reason other
1051 than a timeout (e.g. a certificate is required, and is not provided), an
1052 Exim server now closes the connection immediately. Previously it waited for
1053 the client to close - but if the client is SSL, it seems that they each
1054 wait for each other, leading to a delay before one of them times out.
105634: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1057 maintained 0.8.x compatibility because I don't think many are using it, and
1058 it is clearly obsolete.
106035. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1061 transport.
106336. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1064 client certificate was expired. A simple patch fixes this, though I don't
1065 understand the full logic of why the verify callback is called multiple
1066 times.
106837. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1069 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1070 which causes problems with some clients (such as the Certicom SSL Plus
1071 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1072 disables the coutermeasure allowing Eudora to connect."
107438. Exim was not checking that a write() to a log file succeeded. This could
1075 lead to Bad Things if a log got too big, in particular if it hit a file
1076 size limit. Exim now panics and dies if it cannot write to a log file, just
1077 as it does if it cannot open a log file.
107939. Modified OS/Makefile-Linux so that it now contains
1083 The two -D definitions ensure that Exim is compiled with large file
1084 support, which makes it possible to handle log files that are bigger than
1085 2^31.
108740. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1088 instance) a domain was checked against a named list that involved a lookup,
1089 causing $domain_data to be set, then another domain was checked against the
1090 same list, then the first domain was re-checked, the value of $domain_data
1091 after the final check could be wrong. In particular, if the second check
1092 failed, it could be set empty. This bug probably also applied to
1093 $localpart_data.
109541. The strip_trailing_dot option was not being applied to the address given
1096 with the -f command-line option.
109842. The code for reading a message's header from the spool was incrementing
1099 $received_count, but never initializing it. This meant that the value was
1100 incorrect (doubled) while delivering a message in the same process in which
1101 it was received. In the most common configuration of Exim, this never
1102 happens - a fresh exec is done - but it can happen when
1103 deliver_drop_privilege is set.
110543. When Exim logs an SMTP synchronization error - client data sent too soon -
1106 it now includes up to 150 characters of the unexpected data in the log
1107 line.
110944. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1110 and building data strings. The size of both of these buffers was 10 000
1111 bytes - far larger than anybody would *ever* want, thought I. Needless to
1112 say, somebody hit the limit. I have increased the maximum line length to
1113 20 000 and the maximum data length of concatenated lines to 100 000. I have
1114 also fixed two bugs, because there was no checking on these buffers. Tsk,
1115 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1116 buffer is too small.
111845. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1119 lsearch lookups. Now it does.
112146. When parsing a route_list item in a manualroute router, a fixed-length
1122 buffer was used for the list of hosts. I made this 1024 bytes long,
1123 thinking that nobody would ever have a list of hosts that long. Wrong.
1124 Somebody had a whole pile of complicated expansion conditions, and the
1125 string was silently truncated, leading to an expansion error. It turns out
1126 that it is easier to change to an unlimited length (owing to other changes
1127 that have happened since this code was originally written) than to build
1128 structure for giving a limitation error. The length of the item that
1129 expands into the list of hosts is now unlimited.
113147. The lsearch lookup could not handle data where the length of text line was
1132 more than 4095 characters. Such lines were truncated, leading to shortened
1133 data being returned. It should now handle lines of any length.
113548. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1136 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1137 ACL").
113949. Cosmetic tidy to scripts like exicyclog that are generated by globally
1140 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1141 no longer happens in comment lines. A list of replacements is now placed
1142 at the head of all of the source files, except those whose only change is
1143 to replace PERL_COMMAND in the very first #! line.
114550. Replaced the slow insertion sort in queue.c, for sorting the list of
1146 messages on the queue, with a bottom-up merge sort, using code contributed
1147 by Michael Haardt. This should make operations like -bp somewhat faster on
1148 large queues. It won't affect queue runners, except when queue_run_in_order
1149 is set.
115151. Installed eximstats 1.31 in the distribution.
115352. Added support for SRV lookups to the dnslookup router.
115553. If an ACL referred to $message_body or $message_body_end, the value was not
1156 reset for any messages that followed in the same SMTP session.
115854. The store-handling optimization for building very long strings was not
1159 differentiating between the different store pools. I don't think this
1160 actually made any difference in practice, but I've tidied it.
116255. While running the routers to verify a sender address, $sender_address
1163 was still set to the sender address. This is wrong, because when routing to
1164 send a bounce to the sender, it would be empty. Therefore, I have changed
1165 it so that, while verifying a sender address, $sender_address is set to <>.
1166 (There is no change to what happens when verifying a recipient address.)
116856. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1169 target A or AAAA records (if not already returned) without resetting the
1170 qualify_single or search_parents options of the DNS resolver. These are
1171 inappropriate in this case because the targets of MX and SRV records must
1172 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1173 target that, when qualified, matched something in the local domain. These
1174 two options are now turned off when doing these lookups.
117657. It seems that at least some releases of Reiserfs (which does not have the
1177 concept of a fixed number of inodes) returns zero and not -1 for the
1178 number of available inodes. This interacted badly with check_spool_inodes,
1179 which assumed that -1 was the "no such thing" setting. What I have done is
1180 to check that the total number of inodes is greater than zero before doing
1181 the test of how many are available.
118358. When a "warn" ACL statement has a log_message modifier, the message is
1184 remembered, and not repeated. This is to avoid a lot of repetition when a
1185 message has many recipients that cause the same warning to be written.
1186 Howewer, Exim was preserving the list of already written lines for an
1187 entire SMTP session, which doesn't seem right. The memory is now reset if a
1188 new message is started.
119059. The "rewrite" debugging flag was not showing the result of rewriting in the
1191 debugging output unless log_rewrite was also set.
119360. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1194 of (int)(handle) when we know that handle contains (void *)(-1).
119661. The Exim daemon panic-logs an error return when it closes the incoming
1197 connection. However "connection reset by peer" seems to be common, and
1198 isn't really an error worthy of noting specially, so that particular error
1199 is no long logged.
120162. When Exim is trying to find all the local interfaces, it used to panic and
1202 die if the ioctl to get the interface flags failed. However, it seems that
1203 on at least one OS (Solaris 9) it is possible to have an interface that is
1204 included in the list of interfaces, but for which you get a failure error
1205 for this call. This happens when the interface is not "plumbed" into a
1206 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1207 failure of the "get flags" call assumes that the interface is down.
120963. Added a ${eval10: operator, which assumes all numbers are decimal. This
1210 makes life easier for people who are doing arithmetic on fields extracted
1211 from dates, where you often get leading zeros that should not be
1212 interpreted as octal.
121464. Added qualify_domain to the redirect router, to override the global
1215 setting.
121765. If a pathologically long header line contained very many addresses (the
1218 report of this problem mentioned 10 000) and each of them was rewritten,
1219 Exim could use up a very large amount of memory. (It kept on making new
1220 copies of the header line as it rewrote, and never released the old ones.)
1221 At the expense of a bit more processing, the header rewriting function has
1222 been changed so that it no longer eats memory in this way.
122466. The generation of the Received: header has been moved from the time that a
1225 message starts to be received, to the time that it finishes. The timestamp
1226 in the Received: header should now be very close to that of the <= log
1227 line. There are two side-effects of this change:
1229 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1230 logged header lines no longer include the local Received: line, because
1231 it has not yet been created. The same applies to a copy of the message
1232 that is returned to a non-SMTP sender when a message is rejected.
1234 (b) When a filter file is tested using -bf, no additional Received: header
1235 is added to the test message. After some thought, I decided that this
1236 is a bug fix.
1238 This change does not affect the value of $received_for. It is still set
1239 after address rewriting, but before local_scan() is called.
124167. Installed the latest Cygwin-specific files from the Cygwin maintainer.
124368. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1244 gave an unhelpful panic error message, and a defer error. I have managed to
1245 change this behaviour so that it now rejects any supplied certificate,
1246 which seems right, as the list of acceptable certificates is empty.
124869. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1249 gave an unhelpful defer error. I have not managed to make this reject any
1250 supplied certificates, but the error message it gives is "no certificate
1251 supplied", which is not helpful.
125370. exigrep's output now also includes lines that are not associated with any
1254 message, but which match the given pattern. Implemented by a patch from
1255 Martin Sluka, which also tidied up the Perl a bit.
125771. Recipient callout verification, like sender verification, was using <> in
1258 the MAIL FROM command. This isn't really the right thing, since the actual
1259 sender may affect whether the remote host accepts the recipient or not. I
1260 have changed it to use the actual sender in the callout; this means that
1261 the cache record is now keyed on a recipient/sender pair, not just the
1262 recipient address. There doesn't seem to be a real danger of callout loops,
1263 since a callout by the remote host to check the sender would use <>.
1264 [SEE ABOVE: changed after hitting problems.]
126672. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1267 temporary errors. However, in the case of such a code being given after
1268 the end of a data transmission (i.e. after ".") Exim was failing to write
1269 a retry record for the message. (Yes, there was some broken host that was
1270 actually sending 8xx at this point.)
127273. An unknown lookup type in a host list could cause Exim to panic-die when
1273 the list was checked. (An example that provoked this was putting <; in the
1274 middle of a list instead of at the start.) If this happened during a DATA
1275 ACL check, a -D file could be left lying around. This kind of configuration
1276 error no longer causes Exim to die; instead it causes a defer errror. The
1277 incident is still logged to the main and panic logs.
127974. Buglet left over from Exim 3 conversion. The message "too many messages
1280 in one connection" was written to the rejectlog but not the mainlog, except
1281 when address rewriting (yes!) was being logged.
128375. Added write_rejectlog option.
128576. When a system filter was run not as root (that is, when system_filter_user
1286 was set), the values of the $n variables were not being returned to the
1287 main process; thus, they were not subsequently available in the $sn
1288 variables.
129077. Added +return_path_on_delivery log selector.
129278. A connection timeout was being treated differently from recipients deferred
1293 when testing hosts_max_try with a message that was older than the host's
1294 retry timeout. (The host should not be counted, thus allowing all hosts to
1295 be tried at least once before bouncing.) This may have been the cause of an
1296 occasionally reported bug whereby a message would remain on the queue
1297 longer than the retry timeout, but would be bounced if a delivery was
1298 forced. I say "may" because I never totally pinned down the problem;
1299 setting up timeout/retry tests is difficult. See also the next item.
130179. The ultimate address timeout was not being applied to errors that involved
1302 a combination of host plus message (for example, a timeout on a MAIL
1303 command). When an address resolved to a number of possible hosts, and they
1304 were not all tried for each delivery (e.g. because of hosts_max_try), a
1305 message could remain on the queue longer than the retry timeout.
130780. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1308 Haardt.
131081. Fixed an obscure SMTP outgoing bug which required at least the following
1311 conditions: (a) there was another message waiting for the same server;
1312 (b) the server returned 5xx to all RCPT commands in the first message so
1313 that the message was not completed; (c) the server dropped the connection
1314 or gave a negative response to the RSET that Exim sends to abort the
1315 transaction. The observed case was a dropped connection after DATA that had
1316 been sent in pipelining mode. That is, the server had advertised PIPELINING
1317 but was not implementing it correctly. The effect of the bug was incorrect
1318 behaviour, such as trying another host, and this could lead to a crash.
1321Exim version 4.30
1324 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1325 and daemon.c were passed as pointers to ints; they should have been
1326 pointers to socklen_t variables (which are typically unsigned ints).
1328 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1329 fixed.
1331 3. Fixed a really odd bug that affected only the testing scheme; patching a
1332 certain fixed string in the binary changed the value of another string that
1333 happened to be identical to the end of the original first string.
1335 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1336 name", it returns that address as the IP address. On some operating
1337 systems (e.g. Solaris), it also passes back the IP address string as the
1338 "host name". However, on others (e.g. Linux), it passes back an empty
1339 string. Exim wasn't checking for this, and was changing the host name to an
1340 empty string, assuming it had been canonicized.
1342 5. Although rare, it is permitted to have more than one PTR record for a given
1343 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1344 all the names associated with an address, because they do in Solaris.
1345 However, it seems that they do not in Linux for data that comes from the
1346 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1347 I found this out when I moved to a new Linux workstation and tried to run
1348 the Exim test suite.
1350 To get round this problem I have changed the code so that it now does its
1351 own call to the DNS to look up PTR records when searching for a host name.
1352 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1353 addresses that are only in /etc/hosts are still found.
1355 This behaviour is, however, controlled by an option called host_lookup_
1356 order, which defaults to "bydns:byaddr". If people want to use the other
1357 order, or indeed, just use one or the other means of lookup, they can
1358 specify it in this variable.
1360 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1361 some operating systems, this comes back from gethostbyaddr() as an empty
1362 string, and this is what Exim used to test for. However, it seems that in
1363 other systems, "." is yielded. Exim now tests for this case too.
1365 7. The values of check_spool_space and check_log_space are now held internally
1366 as a number of kilobytes instead of an absolute number of bytes. If a
1367 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1368 kilobyte. This means that much larger values can be stored.
1370 8. Exim monitor: an attempt to get the action menu when not actually pointing
1371 at a message produces an empty menu entitled "No message selected". This
1372 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1373 no entries in it ("Shell widget menu has zero width and/or height"). So I
1374 have added a single, blank menu entry in this case.
1376 9. Added ${quote_local_part.
137810. MIME decoding is now applied to the contents of Subject: header lines when
1379 they are logged.
138111. Now that a reference to $sender_host_address automatically causes a reverse
1382 lookup to occur if necessary (4.13/18), there is no need to arrange for a
1383 host lookup before query-style lookups in lists that might use this
1384 variable. This has therefore been abolished, and the "net-" prefix is no
1385 longer necessary for query-style lookups.
138712. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
1388 have been a typo for LFLAGS, so it has been changed.
139013. The install script calls Exim with "-C /dev/null" in order to find the
1391 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
1392 to be output. Howeve, since Exim outputs its version number before the
1393 error, it didn't break the script. It just looked ugly. I fixed this by
1394 always allowing "-C /dev/null" if the caller is root.
139614. Ignore overlarge ACL variable number when reading spool file - insurance
1397 against a later release with more variables having written the file.
139915. The standard form for an IPv6 address literal was being rejected by EHLO.
1400 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1401 this, as well as the form without the "IPv6" on the front.
140316. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
1404 OS/Makefile-Darwin file.
140617. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
1407 only to LDAP libraries that do not have LDAP_OPT_DEREF.
140918. After change 4.21/52, "%ld" was used to format the contents of the $inode
1410 variable. However, some OS use ints for inodes. I've added cast to long int
1411 to get rid of the compiler warning.
141319. I had forgotten to lock out "/../" in configuration file names when
1414 ALT_CONFIG_PREFIX was set.
141620. Routers used for verification do not need to specify transports. However,
1417 if such a router generated a host list, and callout was configured, Exim
1418 crashed, because it could not find a port number from the (non-existent)
1419 transport. It now assumes port 25 in this circumstance.
142121. Added the -t option to exigrep.
142322. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
1424 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
1425 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
1426 them is set, LOOKUP_LSEARCH is forced.
142823. "exim -bV" now outputs a list of lookups that are included in the binary.
143024. Added sender and host information to the "rejected by local_scan()" log
1431 line; previously there was no indication of these.
143325. Added .include_if_exists.
143526. Change 3.952/11 added an explicit directory sync on top of a file sync for
1436 Linux. It turns out that not all file systems support this. Apparently some
1437 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
1438 do it.) To cope with this, the error EINVAL, which means that sync-ing is
1439 not supported on the file descriptor, is now ignored when Exim is trying to
1440 sync a directory. This applies only to Linux.
144227. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
144428. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
1445 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
1446 this.
144829. Added support for maildirsize files from supplied patch (modified a bit).
145030. The use of :fail: followed by an empty string could lead Exim to respond to
1451 sender verification failures with (e.g.):
1453 550 Verification failed for <xxx>
1454 550 Sender verify failed
1456 where the first response line was missing the '-' that indicates it is not
1457 the final line of the response.
145931. The loop for finding the name of the user that called Exim had a hardwired
1460 limit of 10; it now uses the value of finduser_retries, which is used for
1461 all other user lookups.
146332. Added $received_count variable, available in data and not_smtp ACLs, and at
1464 delivery time.
146633. Exim was neglecting to zero errno before one call of strtol() when
1467 expanding a string and expecting an integer value. On some systems this
1468 resulted in spurious "integer overflow" errors. Also, it was casting the
1469 result into an int without checking.
147134. Testing for a connection timeout using "timeout_connect" in the retry rules
1472 did not work. The code looks as if it has *never* worked, though it appears
1473 to have been documented since at least releast 1.62. I have made it work.
147535. The "timeout_DNS" error in retry rules, also documented since at least
1476 1.62, also never worked. As it isn't clear exactly what this means, and
1477 clearly it isn't a major issue, I have abolished the feature by treating it
1478 as "timeout", and writing a warning to the main and panic logs.
148036. The display of retry rules for -brt wasn't always showing the error code
1481 correctly.
148337. Added new error conditions to retry rules: timeout_A, timeout_MX,
1484 timeout_connect_A, timeout_connect_MX.
148638. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
1487 to the empty sender.
148939. The daemon was not analysing the content of -oX till after it had closed
1490 stderr and disconnected from the controlling terminal. This meant that any
1491 syntax errors were only noted on the panic log, and the return code from
1492 the command was 0. By re-arranging the code a little, I've made the
1493 decoding happen first, so such errors now appear on stderr, and the return
1494 code is 1. However, the actual setting up of the sockets still happens in
1495 the disconnected process, so errors there are still only recorded on the
1496 panic log.
149840. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
1499 connections (as happens on some IP stacks) was logged at start up time as
1500 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
1501 it from "IPv6 and IPv4", which means that two separate sockets are being
1502 used.
150441. The debug output for gethostbyname2() or getipnodebyname() failures now
1505 says whether AF_INET or AF_INET6 was passed as an argument.
150742. Exiwhat output was messed up when time zones were included in log
1508 timestamps.
151043. Exiwhat now gives more information about the daemon's listening ports,
1511 and whether -tls-on-connect was used.
151344. The "port" option of the smtp transport is now expanded.
151545. A "message" modifier in a "warn" statement in a non-message ACL was being
1516 silently ignored. Now an error message is written to the main and panic
1517 logs.
151946. There's a new ACL modifier called "logwrite" which writes to a log file
1520 as soon as it is encountered.
152247. Added $local_user_uid and $local_user_gid at routing time.
152448. Exim crashed when trying to verify a sender address that was being
1525 rewritten to "<>".
152749. Exim was recognizing only a space character after ".include". It now also
1528 recognizes a tab character.
153050. Fixed several bugs in the Perl script that creates the exim.8 man page by
1531 extracting the relevant information from the specification. The man page no
1532 longer contains scrambled data for the -d option, and I've added a section
1533 at the front about calling Exim under different names.
153551. Added "extra_headers" argument to the "mail" command in filter files.
153752. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
1538 crash.
154053. Installed eximstats 1.29.
154254. Added transport_filter_timeout as a generic transport option.
154455. Exim no longer adds an empty Bcc: header to messages that have no To: or
1545 Cc: header lines. This was required by RFC 822, but it not required by RFC
1546 2822.
154856. Exim used to add From:, Date:, and Message-Id: header lines to any
1549 incoming messages that did not have them. Now it does so only if the
1550 message originates locally, that is, if there is no associated remote host
1551 address. When Resent- header lines are present, this applies to the Resent-
1552 lines rather than the non-Resent- lines.
155457. Drop incoming SMTP connection after too many syntax or protocol errors. The
1555 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
155758. Messages for configuration errors now include the name of the main
1558 configuration file - useful now that there may be more than one file in a
1559 list (.included file names were always shown).
156159. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
1562 for those rare installations that do not start the daemon as root or run it
1563 setuid root. I've cut out the call to initgroups() if the daemon is not
1564 root at that time.
156660. The Exim user and group can now be bound into the binary as text strings
1567 that are looked up at the start of Exim's processing.
156961. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
157162. Added $mailstore_basename variable.
157363. Installed patch to sieve.c from Michael Haardt.
157564. When Exim failed to open the panic log after failing to open the main log,
1576 the original message it was trying to log was written to stderr and debug
1577 output, but if they were not available (the usual case in production), it
1578 was lost. Now it is written to syslog before the two lines that record the
1579 failures to open the logs.
158165. Users' Exim filters run in subprocesses under the user's uid. It is
1582 possible for a "deliver" command or an alias in a "personal" command to
1583 provoke an address rewrite. If logging of address rewriting is configured,
1584 this fails because the process is not running as root or exim. There may be
1585 a better way of dealing with this, but for the moment (because 4.30 needs
1586 to be released), I have disabled address rewrite logging when running a
1587 filter in a non-root, non-exim process.
1590Exim version 4.24
1593 1. The buildconfig auxiliary program wasn't quoting the value set for
1594 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
1595 not defined. This bug was masked in 4.22 by the effect that was fixed in
1596 change 4.23/1.
1598 2. Some messages that were rejected after a message id was allocated were
1599 shown as "incomplete" by exigrep. It no longer does this for messages that
1600 are rejected by local_scan() or the DATA or non-SMTP ACLs.
1602 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
1603 have allow_domain_literals set, the ID did not get logged in the <= line.
1604 Domain literals are now always recognized in Message-ID: header lines.
1606 4. The first argument for a ${extract expansion item is the key name or field
1607 number. Leading and trailing spaces in this item were not being ignored,
1608 causing some misleading effects.
1610 5. When deliver_drop_privilege was set, single queue runner processes started
1611 manually (i.e. by the command "exim -q") or by the daemon (which uses the
1612 same command in the process it spins off) were not dropping privilege.
1614 6. When the daemon running as "exim" started a queue runner, it always
1615 re-executed Exim in the spun-off process. This is a waste of effort when
1616 deliver_drop_privilege is set. The new process now just calls the
1617 queue-runner function directly.
1620Exim version 4.23
1623 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
1626 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
1627 ignored. Though the use of -oP was forcing the writing of a pid file, it
1628 was always written to the default place.
1630 3. If the message "no IP address found for host xxxx" is generated during
1631 incoming verification, it is now followed by identification of the incoming
1632 connection (so you can more easily find what provoked it).
1634 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
1636 5. Added some features to "harden" Exim a bit more against certain attacks:
1638 (a) There is now a build-time option called FIXED_NEVER_USERS that can
1639 be put in Local/Makefile. This is like the never_users runtime option,
1640 but it cannot be overridden. The default setting is "root".
1642 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
1643 prefix string with which any file named in a -C command line option
1644 must start.
1646 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
1647 is retained for -C and -D only if the caller of Exim is root. Without
1648 it, the exim user may also use -C and -D and retain privilege.
1650 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
1651 command line option is disabled.
1653 6. Macro names set by the -D option must start with an upper case letter, just
1654 like macro names defined in the configuration file.
1656 7. Added "dereference=" facility to LDAP.
1658 8. Two instances of the typo "uknown" in the source files are fixed.
1660 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
1661 the Configure-Makefile script screwed up while processing it.
166310. Incorporated PCRE 4.4.
166511. The SMTP synchronization check was not operating right at the start of an
1666 SMTP session. For example, it could not catch a HELO sent before the client
1667 waited for the greeting. There is now a check for outstanding input at the
1668 point when the greeting is written. Because of the duplex, asynchronous
1669 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
1670 way, but not yet received, when the check is performed.
167212. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
1673 on TCP/IP sockets, because this apparently causes some broken clients to
1674 timeout.
167613. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
1677 unchanged) from the Cygwin maintainer.
167914. The code for -bV that shows what is in the binary showed "mbx" when maildir
1680 was supported instead of testing for mbx. Effectively a typo.
168215. The spa authenticator server code was not checking that the input it
1683 received was valid base64.
168516. The debug output line for the "set" modifier in ACLs was not showing the
1686 name of the variable that was being set.
168817. Code tidy: the variable type "vtype_string" was never used. Removed it.
169018. Previously, a reference to $sender_host_name did not cause a DNS reverse
1691 lookup on its own. Something else was needed to trigger the lookup. For
1692 example, a match in host_lookup or the need for a host name in a host list.
1693 Now, if $sender_host_name is referenced and the host name has not yet been
1694 looked up, a lookup is performed. If the lookup fails, the variable remains
1695 empty, and $host_lookup_failed is set to "1".
169719. Added "eqi" as a case-independent comparison operator.
169920. The saslauthd authentication condition could segfault if neither service
1700 nor realm was specified.
170221. If an overflowing value such as "2048M" was set for message_size_limit, the
1703 error message that was logged was misleading, and incoming SMTP
1704 connections were dropped. The message is now more accurate, and temporary
1705 errors are given to SMTP connections.
170722. In some error situations (such as 21 above) Exim rejects all SMTP commands
1708 (except RSET) with a 421 error, until QUIT is received. However, it was
1709 failing to send a response to QUIT.
171123. The HELO ACL was being run before the code for helo_try_verify_hosts,
1712 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
1713 ACL is now run after the helo_try_verify_hosts code.
171524. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
1716 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
1717 case-independent, so other case variants are also recognized). Apparently
1718 some systems use these upper case variants.
172025. If more than two messages were waiting for the same host, and a transport
1721 filter was specified for the transport, Exim sent two messages over the
1722 same TCP/IP connection, and then failed with "socket operation on non-
1723 socket" when it tried to send the third.
172526. Added Exim::debug_write and Exim::log_write for embedded Perl use.
172727. The extern definition of crypt16() in expand.c was not being excluded when
1728 the OS had its own crypt16() function.
173028. Added bounce_return_body as a new option, and bounce_return_size_limit
1731 as a preferred synonym for return_size_limit, both as an option and as an
1732 expansion variable.
173429. Added LIBS=-liconv to OS/Makefile-OSF1.
173630. Changed the default configuration ACL to relax the local part checking rule
1737 for addresses that are not in any local domains. For these addresses,
1738 slashes and pipe symbols are allowed within local parts, but the sequence
1739 /../ is explicitly forbidden.
174131. SPA server authentication was not clearing the challenge buffer before
1742 using it.
174432. log_message in a "warn" ACL statement was writing to the reject log as
1745 well as to the main log, which contradicts the documentation and doesn't
1746 seem right (because no rejection is happening). So I have stopped it.
174833. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
1749 However, I am unable to do any testing of this.
175134. Fixed an infelicity in the appendfile transport. When checking directories
1752 for a mailbox, to see if any needed to be created, it was accidentally
1753 using path names with one or more superfluous leading slashes; tracing
1754 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
175635. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
1757 contents are added to the log line that is written for every discarded
1758 recipient. (Previously a log_message setting was ignored.)
176036. The ${quote: operator now quotes the string if it is empty.
176237. The install script runs exim in order to find its version number. If for
1763 some reason other than non-existence or emptiness, which it checks, it
1764 could not run './exim', it was installing it with an empty version number,
1765 i.e. as "exim-". This error state is now caught, and the installation is
1766 aborted.
176838. An argument was missing from the function that creates an error message
1769 when Exim fails to connect to the socket for saslauthd authentication.
1770 This could cause Exim to crash, or give a corrupted message.
177239. Added isip, isip4, and isip6 to ${if conditions.
177440. The ACL variables $acl_xx are now saved with the message, and can be
1775 accessed later in routers, transports, and filters.
177741. The new lookup type nwildlsearch is like wildlsearch, except that the key
1778 strings in the file are not string-expanded.
178042. If a MAIL command specified a SIZE value that was too large to fit into an
1781 int variable, the check against message_size_limit failed. Such values are
1782 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
1783 day this will have to be increased, but I don't think I want to be around
1784 when emails are that large.
1788Exim version 4.22
1791 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
1792 iconv() is not standard in FreeBSD.
1794 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
1795 IPv6 enabled. The observed symptom was a segmentation fault on return from
1796 the function os_common_find_running_interfaces() in src/os.c.
1798 3. In the check_special_case() function in daemon.c I had used "errno" as an
1799 argument name, which causes warnings on some systems. This was basically a
1800 typo, since it was named "eno" in the comments!
1802 4. The code that waits for the clock to tick (at a resolution of some fraction
1803 of a second) so as to ensure message-id uniqueness was always waiting for
1804 at least one whole tick, when it could have waited for less. [This is
1805 almost certainly not relevant at current processor speeds, where it is
1806 unlikely to ever wait at all. But we try to future-proof.]
1808 5. The function that sleeps for a time interval that includes fractions of a
1809 second contained a race. It did not block SIGALRM between setting the
1810 timer, and suspending (a couple of lines later). If the interval was short
1811 and the sigsuspend() was delayed until after it had expired, the suspension
1812 never ended. On busy systems this could lead to processes getting stuck for
1813 ever.
1815 6. Some uncommon configurations may cause a lookup to happen in a queue runner
1816 process, before it forks any delivery processes. The open lookup caching
1817 mechanism meant that the open file or database connection was passed into
1818 the delivery process. The problem was that delivery processes always tidy
1819 up cached lookup data. This could cause a problem for the next delivery
1820 process started by the queue runner, because the external queue runner
1821 process does not know about the closure. So the next delivery process
1822 still has data in the lookup cache. In the case of a file lookup, there was
1823 no problem because closing a file descriptor in a subprocess doesn't affect
1824 the parent. However, if the lookup was caching a connection to a database,
1825 the connection was closed, and the second delivery process was likely to
1826 see errors such as "PGSQL: query failed: server closed the connection
1827 unexpectedly". The problem has been fixed by closing all cached lookups
1828 in a queue runner before running a delivery process.
1830 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
1831 seem to have the "const" qualifier which it has on other OS. I've
1832 parameterised it.
1834 8. Change 4.21/2 was too strict. It is only if there are two authenticators
1835 *of the same type* (client or server) with the same public name that an
1836 error should be diagnosed.
1838 9. When Exim looked up a host name for an IP address, but failed to find the
1839 original IP address when looking up the host name (a safety check), it
1840 output the message "<ip address> does not match any IP for NULL", which was
1841 confusing, to say the least. The bug was that the host name should have
1842 appeared instead of "NULL".
184410. Since release 3.03, if Exim is called by a uid other than root or the Exim
1845 user that is built into the binary, and the -C or -D options is used, root
1846 privilege is dropped before the configuration file is read. In addition,
1847 logging is switched to stderr instead of the normal log files. If the
1848 configuration then re-defines the Exim user, the unprivileged environment
1849 is probably not what is expected, so Exim logs a panic warning message (but
1850 proceeds).
1852 However, if deliver_drop_privilege is set, the unprivileged state may well
1853 be exactly what is intended, so the warning has been cut out in that case,
1854 and Exim is allowed to try to write to its normal log files.
1857Exim version 4.21
1860 1. smtp_return_error_details was not giving details for temporary sender
1861 or receiver verification errors.
1863 2. Diagnose a configuration error if two authenticators have the same public
1864 name.
1866 3. Exim used not to create the message log file for a message until the first
1867 delivery attempt. This could be confusing when incoming messages were held
1868 for policy or load reasons. The message log file is now created at the time
1869 the message is received, and an initial "Received" line is written to it.
1871 4. The automatically generated man page for command line options had a minor
1872 bug that caused no ill effects; however, a more serious problem was that
1873 the procedure for building the man page automatically didn't always
1874 operate. Consequently, release 4.20 contains an out-of-date version. This
1875 shouldn't happen again.
1877 5. When building Exim with embedded Perl support, the script that builds the
1878 Makefile was calling 'perl' to find its compile-time parameters, ignoring
1879 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
1881 6. The freeze_tell option was not being used for messages that were frozen on
1882 arrival, either by an ACL or by local_scan().
1884 7. Added the smtp_incomplete_transaction log selector.
1886 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
1887 was accepting AUTH without a new EHLO.
1889 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
1890 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
1891 RFC.
189310. Logging of TCP/IP connections (when configured) now happens in the main
1894 daemon process instead of the child process, so that the TCP/IP connection
1895 count is more accurate (but it can never be perfect).
189711. The use of "drop" in a nested ACL was not being handled correctly in the
1898 outer ACL. Now, if condition failure induced by the nested "drop" causes
1899 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
1900 or "require"), the connection is dropped.
190212. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
1903 that yield "discard" can now be used with an "accept" or a "discard" verb,
1904 but an error is generated for any others (because I can't see a useful way
1905 to define what should happen).
190713. When an ACL is read dynamically from a file (or anywhere else), the lines
1908 are now processed in the same way as lines in the Exim configuration file.
1909 In particular, continuation lines are supported.
191114. Added the "dnslists = a.b.c!=n.n.n.n" feature.
191315. Added -ti meaning -t -i.
191516. Check for letters, digits, hyphens, and dots in the names of dnslist
1916 domains, and warn by logging if others are found.
191817. At least on BSD, alignment is not guarenteed for the array of ifreq's
1919 returned from GIFCONF when Exim is trying to find the list of interfaces on
1920 a host. The code in os.c has been modified to copy each ifreq to an aligned
1921 structure in all cases.
1923 Also, in some cases, the returned ifreq's were being copied to a 'struct
1924 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
1925 means the last couple of bytes of an IPv6 address could be chopped if the
1926 ifreq contained only a normal sockaddr (14 bytes storage).
192818. Named domain lists were not supported in the hosts_treat_as_local option.
1929 An entry such as +xxxx was not recognized, and was treated as a literal
1930 domain name.
193219. Ensure that header lines added by a DATA ACL are included in the reject log
1933 if the ACL subsequently rejects the message.
193520. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
1936 MD5 (which is deprecated).
193821. When testing a filter file using -bf, Exim was writing a message when it
1939 took the sender from a "From " line in the message, but it was not doing so
1940 when it took $return_path from a Return-Path: header line. It now does.
194222. If the contents of a "message" modifier for a "warn" ACL verb do not begin
1943 with a valid header line field name (a series of printing characters
1944 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
194623. Changed "disc" in the source to "disk" to conform to the documentation and
1947 the book and for uniformity.
194924. Ignore Sendmail's -Ooption=value command line item.
195125. When execve() failed while trying to run a command in a pipe transport,
1952 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
1953 could be confused with a return value of 69 from the command itself. This
1954 has been changed to 127, the value the shell returns if it is asked to run
1955 a non-existent command. The wording for the related log line suggests a
1956 non-existent command as the problem.
195826. If received_header_text expands to an empty string, do not add a Received:
1959 header line to the message. (Well, it adds a token one on the spool, but
1960 marks it "old" so that it doesn't get used or transmitted.)
196227. Installed eximstats 1.28 (addition of -nt option).
196428. There was no check for failure on the call to getsockname() in the daemon
1965 code. This can fail if there is a shortage of resources on the system, with
1966 ENOMEM, for example. A temporary error is now given on failure.
196829. Contrary to the C standard, it seems that in some environments, the
1969 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
1970 program. Exim now does this explicitly; it affects the formatting of
1971 timestamps using strftime().
197330. If exiqsumm was given junk data, it threw up some uninitialized variable
1974 complaints. I've now initialized all the variables, to avoid this.
197632. Header lines added by a system filter were not being "seen" during
1977 transport-time rewrites.
197933. The info_callback() function passed to OpenSSL is set up with type void
1980 (*)(SSL *, int, int), as described somewhere. However, when calling the
1981 function (actually a macro) that sets it up, the type void(*)() is
1982 expected. I've put in a cast to prevent warnings from picky compilers.
198434. If a DNS black list lookup found a CNAME record, but there were no A
1985 records associated with the domain it pointed at, Exim crashed.
198735. If a DNS black list lookup returned more than one A record, Exim ignored
1988 all but the first. It now scans all returned addresses if a particular IP
1989 value is being sought. In this situation, the contents of the
1990 $dnslist_value variable are a list of all the addresses, separated by a
1991 comma and a space.
199336. Tightened up the rules for host name lookups using reverse DNS. Exim used
1994 to accept a host name and all its aliases if the forward lookup for any of
1995 them yielded the IP address of the incoming connection. Now it accepts only
1996 those names whose forward lookup yields the correct IP address. Any other
1997 names are discarded. This closes a loophole whereby a rogue DNS
1998 administrator could create reverse DNS records to break through a
1999 wildcarded host restriction in an ACL.
200137. If a user filter or a system filter that ran in a subprocess used any of
2002 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2003 the wrong values were passed to the pipe command ($thisaddress had the
2004 value of $0, $0 had the value of $1, etc). This bug was introduced by
2005 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
200738. Improved the line breaking for long SMTP error messages from ACLs.
2008 Previously, if there was no break point between 40 and 75 characters, Exim
2009 left the rest of the message alone. Two changes have been made: (a) I've
2010 reduced the minimum length to 35 characters; (b) if it can't find a break
2011 point between 35 and 75 characters, it looks ahead and uses the first one
2012 that it finds. This may give the occasional overlong line, but at least the
2013 remaining text gets split now.
201539. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2016 file descriptors might be low, and that setting 1000 would always raise it.
2017 It turns out that in some environments, the limit is already over 1000 and
2018 that lowering it causes trouble. So now Exim takes care not to decrease it.
202040. When delivering a message, the value of $return_path is set to $sender_
2021 address at the start of routing (routers may change the value). By an
2022 oversight, this default was not being set up when an address was tested by
2023 -bt or -bv, which affected the outcome if any router or filter referred to
2024 $return_path.
202641. The idea of the "warn" ACL verb is that it adds a header or writes to the
2027 log only when "message" or "log_message" are set. However, if one of the
2028 conditions was an address verification, or a call to a nested ACL, the
2029 messages generated by the underlying test were being passed through. This
2030 no longer happens. The underlying message is available in $acl_verify_
2031 message for both "message" and "log_message" expansions, so it can be
2032 passed through if needed.
203442. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2035 new expansion $bh_ to give the encoded byte string without charset
2036 translation. Translation happens only if iconv() is available; HAVE_ICONV
2037 indicates this at build time. HEADERS_CHARSET gives the charset to
2038 translate to; headers_charset can change it in the configuration, and
2039 "headers charset" can change it in an individual filter file.
204143. Now that we have a default RFC 2047 charset (see above), the code in Exim
2042 that creates RFC 2047 encoded "words" labels them as that charset instead
2043 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2044 expansion operator; (ii) when Exim creates a From: line for a local
2045 message; (iii) when a header line is rewritten to include a "phrase" part.
204744. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2048 buggy, causing it to skip the first lines of messages whose message ID
2049 ended in 'D'. This would not have bitten before Exim release 4.14, because
2050 message IDs were unlikely to end in 'D' before then. The effect was to have
2051 incorrect size information for certain domains.
205345. #include "config.h" was missing at the start of the crypt16.c module. This
2054 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2055 noticed.
205746. If there was a timeout during a "random" callout check, Exim treated it as
2058 a failure of the random address, and carried on sending RSET and the real
2059 address. If the delay was just some slowness somewhere, the response to the
2060 original RCPT would be taken as a response to RSET and so on, causing
2061 mayhem of various kinds.
206347. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2064 when I implemented it. It didn't allow for the fact that some option values
2065 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2066 the right test for positive values.
206848. Domain names in DNS records are case-independent. Exim always looks them up
2069 in lower case. Some resolvers return domain names in exactly the case they
2070 appear in the zone file, that is, they may contain uppercase letters. Not
2071 all resolvers do this - some return always lower case. Exim was treating a
2072 change of case by a resolver as a change of domain, similar to a widening
2073 of a domain abbreviation. This triggered its re-routing code and so it was
2074 trying to route what was effectively the same domain again. This normally
2075 caused routing to fail (because the router wouldn't handle the domain
2076 twice). Now Exim checks for this case specially, and just changes the
2077 casing of the domain that it ultimately uses when it transmits the message
2078 envelope.
208049. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2081 module.
208350. If a filter generated a file delivery with a non-absolute name (possible if
2084 no home directory exists for the router), the forbid_file option was not
2085 forbidding it.
208751. Added '&' feature to dnslists, to provide bit mask matching in addition to
2088 the existing equality matching.
209052. Exim was using ints instead of ino_t variables in some places where it was
2091 dealing with inode numbers.
209353. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2094 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2095 called TMPDIR, and if it finds it is different, it changes its value.
209754. The smtp_printf() function is now made available to local_scan() so
2098 additional output lines can be written before returning. There is also an
2099 smtp_fflush() function to enable the detection of a dropped connection.
2100 The variables smtp_input and smtp_batched_input are exported to
2101 local_scan().
210355. Changed the default runtime configuration: the message "Unknown user"
2104 has been removed from the ACL, and instead placed on the localuser router,
2105 using the cannot_route_message feature. This means that any verification
2106 failures that generate their own messages won't get overridden. Similarly,
2107 the "Unrouteable address" message that was in the ACL for unverifiable
2108 relay addresses has also been removed.
211056. Added hosts_avoid_esmtp to the smtp transport.
211257. The exicyclog script was not checking for the esoteric option
2113 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2114 will work only if exicyclog is run under the appropriate euid.
211658. Following a discussion on the list, the rules by which Exim recognises line
2117 endings on incoming messages have been changed. The -dropcr and drop_cr
2118 options are now no-ops, retained only for backwards compatibility. The
2119 following line terminators are recognized: LF CRLF CR. However, special
2120 processing applies to CR:
2122 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2123 nor a local message in the state where . is a terminator.
2125 (ii) If a bare CR is encountered in a header line, an extra space is added
2126 after the line terminator so as not to end the header. The reasoning
2127 behind this is that bare CRs in header lines are most likely either
2128 to be mistakes, or people trying to play silly games.
213059. The size of a message, as listed by "-bp" or in the Exim monitor window,
2131 was being incorrectly given as 18 bytes larger than it should have been.
2132 This is a VOB (very old bug).
213460. This may never have affected anything current, but just in case it has:
2135 When the local host is found other than at the start of a list of hosts,
2136 the local host, those with the same MX, and any that follow, are discarded.
2137 When the list in question was part of a longer list of hosts, the following
2138 hosts (not currently being processed) were also being discarded. This no
2139 longer happens. I'm not sure if this situation could ever has previously
2140 arisen.
214261. Added the "/MX" feature to lists of hosts in the manualroute and query
2143 program routers.
214562. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2146 header. This is something that is recommended in a new Internet Draft, and
2147 is something that is documented as being done by Sendmail. There are two
2148 possible values. For messages generated by the autoreply transport, Exim
2149 adds:
2151 Auto-Submitted: auto-replied
2153 whereas for all other generated messages (e.g. bounces) it adds
2155 Auto-Submitted: auto-generated
215763. The "personal" condition in filters now includes a test for the
2158 Auto-Submitted: header. If it contains the string "auto-" the message it
2159 not considered personal.
216164. Added rcpt_include_affixes as a generic transport option.
216365. Added queue_only_override (default true).
216566. Added the syslog_duplication option.
216767. If what should have been the first header line of a message consisted of
2168 a space followed by a colon, Exim was mis-interpreting it as a header line.
2169 It isn't of course - it is syntactically invalid and should therefore be
2170 treated as the start of the message body. The misbehaviour could have
2171 caused a number of strange effects, including loss of data in subsequent
2172 header lines, and spool format errors.
217468. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2175 client host had authenticated. This control can now be exercised by an ACL
2176 for more flexibility.
217869. By default, callouts do not happen when testing with -bh. There is now a
2179 variant, -bhc, which does actually run the callout code, including
2180 consulting and updating the callout cache.
218270. Added support for saslauthd authentication, courtesy of Alexander
2183 Sabourenkov.
218571. If statvfs() failed on the spool or log directories while checking their
2186 size for availability, Exim confusingly gave the error "space shortage".
2187 Furthermore, in debugging mode it crashed with a floating point exception.
2188 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2189 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2190 serious problem, Exim now writes to the main and panic logs when this
2191 happens, with details of the failure. It then refuses to accept the
2192 incoming message, giving the message "spool directory problem" or "log
2193 directory problem" with a 421 code for SMTP messages.
219572. When Exim is about to re-exec itself, it ensures that the file descriptors
2196 0, 1, and 2 exist, because some OS complain for execs without them (see
2197 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2198 descriptors. However, the code omitted to check that the open succeeded,
2199 causing mysterious errors if for some reason the permissions on /dev/null
2200 got screwed. Now Exim writes a message to the main and panic logs, and
2201 bombs out if it can't open /dev/null.
220373. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2204 interact so that it is all more flexible. It is supposed to remain
2205 backwards compatible. Also added extra_local_interfaces.
220774. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2208 to bomb out with an assertion failure - to the client this appears as a
2209 connection drop. This problem occurs in the part of the code that was taken
2210 from the Samba project. Fortunately, the assertion is in a very simple
2211 function, so I have fixed this by reproducing the function inline in the
2212 one place where it is called, and arranging for authentication to fail
2213 instead of killing the process with assert().
221575. The SPA client code was not working when the server requested OEM rather
2216 than Unicode encoding.
221876. Added code to make require_files with a specific uid setting more usable in
2219 the case where statting the file as root fails - usually a non-root-mounted
2220 NFS file system. When this happens and the failure is EACCES, Exim now
2221 forks a subprocess and does the per-uid checking as the relevant uid.
222377. Added process_log_path.
222578. If log_file_path was not explicitly set, a setting of check_log_space or
2226 check_log_inodes was ignored.
222879. If a space check for the spool or log partitions fails, the incident is now
2229 logged. Of course, in the latter case the data may get lost...
223180. Added the %p formatting code to string_format() so that it can be used to
2232 print addresses in debug_print(). Adjusted all the address printing in the
2233 debugging in store.c to use %p rather than %d.
223581. There was a concern that a line of code in smtp_in.c could overflow a
2236 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2237 initially expressed, the concern was not well-founded, because trailing
2238 spaces are removed early. However, if the trailing spaces were followed by
2239 a NULL, they did not get removed, so the overflow was possible. Two fixes
2240 were applied:
2242 (a) I re-wrote the offending code in a cleaner fashion.
2243 (b) If an incoming SMTP command contains a NULL character, it is rejected
2244 as invalid.
224682. When Exim changes uid/gid to the Exim user at daemon start time, it now
2247 runs initgroups(), so that if the Exim user is in any additional groups,
2248 they will be used during message reception.
2251Exim version 4.20
2254The change log for 4.20 and earlier releases has been archived.