drupal-configs/apache2/mods-available/mime.conf

   1 <IfModule mod_mime.c>
   2
   3         #
   4         # TypesConfig points to the file containing the list of mappings from
   5         # filename extension to MIME-type.
   6         #
   7         TypesConfig /etc/mime.types
   8
   9         #
  10         # AddType allows you to add to or override the MIME configuration
  11         # file mime.types for specific file types.
  12         #
  13         #AddType application/x-gzip .tgz
  14         #
  15         # AddEncoding allows you to have certain browsers uncompress
  16         # information on the fly. Note: Not all browsers support this.
  17         # Despite the name similarity, the following Add* directives have
  18         # nothing to do with the FancyIndexing customization directives above.
  19         #
  20         #AddEncoding x-compress .Z
  21         #AddEncoding x-gzip .gz .tgz
  22         #AddEncoding x-bzip2 .bz2
  23         #
  24         # If the AddEncoding directives above are commented-out, then you
  25         # probably should define those extensions to indicate media types:
  26         #
  27         AddType application/x-compress .Z
  28         AddType application/x-gzip .gz .tgz
  29         AddType application/x-bzip2 .bz2
  30
  31         #
  32         # DefaultLanguage and AddLanguage allows you to specify the language of
  33         # a document. You can then use content negotiation to give a browser a
  34         # file in a language the user can understand.
  35         #
  36         # Specify a default language. This means that all data
  37         # going out without a specific language tag (see below) will
  38         # be marked with this one. You probably do NOT want to set
  39         # this unless you are sure it is correct for all cases.
  40         #
  41         # * It is generally better to not mark a page as
  42         # * being a certain language than marking it with the wrong
  43         # * language!
  44         #
  45         # DefaultLanguage nl
  46         #
  47         # Note 1: The suffix does not have to be the same as the language
  48         # keyword --- those with documents in Polish (whose net-standard
  49         # language code is pl) may wish to use "AddLanguage pl .po" to
  50         # avoid the ambiguity with the common suffix for perl scripts.
  51         #
  52         # Note 2: The example entries below illustrate that in some cases
  53         # the two character 'Language' abbreviation is not identical to
  54         # the two character 'Country' code for its country,
  55         # E.g. 'Danmark/dk' versus 'Danish/da'.
  56         #
  57         # Note 3: In the case of 'ltz' we violate the RFC by using a three char
  58         # specifier. There is 'work in progress' to fix this and get
  59         # the reference data for rfc1766 cleaned up.
  60         #
  61         # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
  62         # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
  63         # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
  64         # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
  65         # Norwegian (no) - Polish (pl) - Portugese (pt)
  66         # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
  67         # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
  68         #
  69         AddLanguage am .amh
  70         AddLanguage ar .ara
  71         AddLanguage be .be
  72         AddLanguage bg .bg
  73         AddLanguage bn .bn
  74         AddLanguage br .br
  75         AddLanguage bs .bs
  76         AddLanguage ca .ca
  77         AddLanguage cs .cz .cs
  78         AddLanguage cy .cy
  79         AddLanguage da .dk
  80         AddLanguage de .de
  81         AddLanguage dz .dz
  82         AddLanguage el .el
  83         AddLanguage en .en
  84         AddLanguage eo .eo
  85         # es is ecmascript in /etc/mime.types
  86         RemoveType  es
  87         AddLanguage es .es
  88         AddLanguage et .et
  89         AddLanguage eu .eu
  90         AddLanguage fa .fa
  91         AddLanguage fi .fi
  92         AddLanguage fr .fr
  93         AddLanguage ga .ga
  94         AddLanguage gl .glg
  95         AddLanguage gu .gu
  96         AddLanguage he .he
  97         AddLanguage hi .hi
  98         AddLanguage hr .hr
  99         AddLanguage hu .hu
 100         AddLanguage hy .hy
 101         AddLanguage id .id
 102         AddLanguage is .is
 103         AddLanguage it .it
 104         AddLanguage ja .ja
 105         AddLanguage ka .ka
 106         AddLanguage kk .kk
 107         AddLanguage km .km
 108         AddLanguage kn .kn
 109         AddLanguage ko .ko
 110         AddLanguage ku .ku
 111         AddLanguage lo .lo
 112         AddLanguage lt .lt
 113         AddLanguage ltz .ltz
 114         AddLanguage lv .lv
 115         AddLanguage mg .mg
 116         AddLanguage mk .mk
 117         AddLanguage ml .ml
 118         AddLanguage mr .mr
 119         AddLanguage ms .msa
 120         AddLanguage nb .nob
 121         AddLanguage ne .ne
 122         AddLanguage nl .nl
 123         AddLanguage nn .nn
 124         AddLanguage no .no
 125         AddLanguage pa .pa
 126         AddLanguage pl .po
 127         AddLanguage pt-BR .pt-br
 128         AddLanguage pt .pt
 129         AddLanguage ro .ro
 130         AddLanguage ru .ru
 131         AddLanguage sa .sa
 132         AddLanguage se .se
 133         AddLanguage si .si
 134         AddLanguage sk .sk
 135         AddLanguage sl .sl
 136         AddLanguage sq .sq
 137         AddLanguage sr .sr
 138         AddLanguage sv .sv
 139         AddLanguage ta .ta
 140         AddLanguage te .te
 141         AddLanguage th .th
 142         AddLanguage tl .tl
 143         RemoveType  tr
 144         # tr is troff in /etc/mime.types
 145         AddLanguage tr .tr
 146         AddLanguage uk .uk
 147         AddLanguage ur .ur
 148         AddLanguage vi .vi
 149         AddLanguage wo .wo
 150         AddLanguage xh .xh
 151         AddLanguage zh-CN .zh-cn
 152         AddLanguage zh-TW .zh-tw
 153
 154         #
 155         # Commonly used filename extensions to character sets. You probably
 156         # want to avoid clashes with the language extensions, unless you
 157         # are good at carefully testing your setup after each change.
 158         # See http://www.iana.org/assignments/character-sets for the
 159         # official list of charset names and their respective RFCs.
 160         #
 161         AddCharset us-ascii     .ascii .us-ascii
 162         AddCharset ISO-8859-1  .iso8859-1  .latin1
 163         AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
 164         AddCharset ISO-8859-3  .iso8859-3  .latin3
 165         AddCharset ISO-8859-4  .iso8859-4  .latin4
 166         AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
 167         AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
 168         AddCharset ISO-8859-7  .iso8859-7  .grk .greek
 169         AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
 170         AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
 171         AddCharset ISO-8859-10  .iso8859-10  .latin6
 172         AddCharset ISO-8859-13  .iso8859-13
 173         AddCharset ISO-8859-14  .iso8859-14  .latin8
 174         AddCharset ISO-8859-15  .iso8859-15  .latin9
 175         AddCharset ISO-8859-16  .iso8859-16  .latin10
 176         AddCharset ISO-2022-JP .iso2022-jp .jis
 177         AddCharset ISO-2022-KR .iso2022-kr .kis
 178         AddCharset ISO-2022-CN .iso2022-cn .cis
 179         AddCharset Big5         .Big5      .big5 .b5
 180         AddCharset cn-Big5       .cn-big5
 181         # For russian, more than one charset is used (depends on client, mostly):
 182         AddCharset WINDOWS-1251 .cp-1251   .win-1251
 183         AddCharset CP866           .cp866
 184         AddCharset KOI8   .koi8
 185         AddCharset KOI8-E         .koi8-e
 186         AddCharset KOI8-r         .koi8-r .koi8-ru
 187         AddCharset KOI8-U         .koi8-u
 188         AddCharset KOI8-ru       .koi8-uk .ua
 189         AddCharset ISO-10646-UCS-2 .ucs2
 190         AddCharset ISO-10646-UCS-4 .ucs4
 191         AddCharset UTF-7           .utf7
 192         AddCharset UTF-8           .utf8
 193         AddCharset UTF-16         .utf16
 194         AddCharset UTF-16BE     .utf16be
 195         AddCharset UTF-16LE     .utf16le
 196         AddCharset UTF-32         .utf32
 197         AddCharset UTF-32BE     .utf32be
 198         AddCharset UTF-32LE     .utf32le
 199         AddCharset euc-cn         .euc-cn
 200         AddCharset euc-gb         .euc-gb
 201         AddCharset euc-jp         .euc-jp
 202         AddCharset euc-kr         .euc-kr
 203         #Not sure how euc-tw got in - IANA doesn't list it???
 204         AddCharset EUC-TW         .euc-tw
 205         AddCharset gb2312         .gb2312 .gb
 206         AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
 207         AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
 208         AddCharset shift_jis   .shift_jis .sjis
 209         AddCharset BRF           .brf
 210
 211         #
 212         # AddHandler allows you to map certain file extensions to "handlers":
 213         # actions unrelated to filetype. These can be either built into the server
 214         # or added with the Action directive (see below)
 215         #
 216         # To use CGI scripts outside of ScriptAliased directories:
 217         # (You will also need to add "ExecCGI" to the "Options" directive.)
 218         #
 219         #AddHandler cgi-script .cgi
 220
 221         #
 222         # For files that include their own HTTP headers:
 223         #
 224         #AddHandler send-as-is asis
 225
 226         #
 227         # For server-parsed imagemap files:
 228         #
 229         #AddHandler imap-file map
 230
 231         #
 232         # For type maps (negotiated resources):
 233         # (This is enabled by default to allow the Apache "It Worked" page
 234         #  to be distributed in multiple languages.)
 235         #
 236         AddHandler type-map var
 237
 238         #
 239         # Filters allow you to process content before it is sent to the client.
 240         #
 241         # To parse .shtml files for server-side includes (SSI):
 242         # (You will also need to add "Includes" to the "Options" directive.)
 243         #
 244         AddType text/html .shtml
 245 <IfModule mod_include.c>
 246         AddOutputFilter INCLUDES .shtml
 247 </IfModule>
 248
 249 </IfModule>
 250
 251 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet