From 797e6e61ddf932a9bf1433073d3bfdc4d6cb4ccb Mon Sep 17 00:00:00 2001 From: eostre Date: Fri, 16 Oct 2020 15:11:36 -0400 Subject: [PATCH] sites/default/settings.php --- drupal-configs/settings.php | 607 ++++++++++++++++++++++++++++++++++++ 1 file changed, 607 insertions(+) create mode 100755 drupal-configs/settings.php diff --git a/drupal-configs/settings.php b/drupal-configs/settings.php new file mode 100755 index 0000000..b4ee11b --- /dev/null +++ b/drupal-configs/settings.php @@ -0,0 +1,607 @@ + 'mysql', + * 'database' => 'databasename', + * 'username' => 'username', + * 'password' => 'password', + * 'host' => 'localhost', + * 'port' => 3306, + * 'prefix' => 'myprefix_', + * 'collation' => 'utf8_general_ci', + * ); + * @endcode + * + * The "driver" property indicates what Drupal database driver the + * connection should use. This is usually the same as the name of the + * database type, such as mysql or sqlite, but not always. The other + * properties will vary depending on the driver. For SQLite, you must + * specify a database file name in a directory that is writable by the + * webserver. For most other drivers, you must specify a + * username, password, host, and database name. + * + * Transaction support is enabled by default for all drivers that support it, + * including MySQL. To explicitly disable it, set the 'transactions' key to + * FALSE. + * Note that some configurations of MySQL, such as the MyISAM engine, don't + * support it and will proceed silently even if enabled. If you experience + * transaction related crashes with such configuration, set the 'transactions' + * key to FALSE. + * + * For each database, you may optionally specify multiple "target" databases. + * A target database allows Drupal to try to send certain queries to a + * different database if it can but fall back to the default connection if not. + * That is useful for master/slave replication, as Drupal may try to connect + * to a slave server when appropriate and if one is not available will simply + * fall back to the single master server. + * + * The general format for the $databases array is as follows: + * @code + * $databases['default']['default'] = $info_array; + * $databases['default']['slave'][] = $info_array; + * $databases['default']['slave'][] = $info_array; + * $databases['extra']['default'] = $info_array; + * @endcode + * + * In the above example, $info_array is an array of settings described above. + * The first line sets a "default" database that has one master database + * (the second level default). The second and third lines create an array + * of potential slave databases. Drupal will select one at random for a given + * request as needed. The fourth line creates a new database with a name of + * "extra". + * + * For a single database configuration, the following is sufficient: + * @code + * $databases['default']['default'] = array( + * 'driver' => 'mysql', + * 'database' => 'databasename', + * 'username' => 'username', + * 'password' => 'password', + * 'host' => 'localhost', + * 'prefix' => 'main_', + * 'collation' => 'utf8_general_ci', + * ); + * @endcode + * + * You can optionally set prefixes for some or all database table names + * by using the 'prefix' setting. If a prefix is specified, the table + * name will be prepended with its value. Be sure to use valid database + * characters only, usually alphanumeric and underscore. If no prefixes + * are desired, leave it as an empty string ''. + * + * To have all database names prefixed, set 'prefix' as a string: + * @code + * 'prefix' => 'main_', + * @endcode + * To provide prefixes for specific tables, set 'prefix' as an array. + * The array's keys are the table names and the values are the prefixes. + * The 'default' element is mandatory and holds the prefix for any tables + * not specified elsewhere in the array. Example: + * @code + * 'prefix' => array( + * 'default' => 'main_', + * 'users' => 'shared_', + * 'sessions' => 'shared_', + * 'role' => 'shared_', + * 'authmap' => 'shared_', + * ), + * @endcode + * You can also use a reference to a schema/database as a prefix. This may be + * useful if your Drupal installation exists in a schema that is not the default + * or you want to access several databases from the same code base at the same + * time. + * Example: + * @code + * 'prefix' => array( + * 'default' => 'main.', + * 'users' => 'shared.', + * 'sessions' => 'shared.', + * 'role' => 'shared.', + * 'authmap' => 'shared.', + * ); + * @endcode + * NOTE: MySQL and SQLite's definition of a schema is a database. + * + * Advanced users can add or override initial commands to execute when + * connecting to the database server, as well as PDO connection settings. For + * example, to enable MySQL SELECT queries to exceed the max_join_size system + * variable, and to reduce the database connection timeout to 5 seconds: + * + * @code + * $databases['default']['default'] = array( + * 'init_commands' => array( + * 'big_selects' => 'SET SQL_BIG_SELECTS=1', + * ), + * 'pdo' => array( + * PDO::ATTR_TIMEOUT => 5, + * ), + * ); + * @endcode + * + * WARNING: These defaults are designed for database portability. Changing them + * may cause unexpected behavior, including potential data loss. + * + * @see DatabaseConnection_mysql::__construct + * @see DatabaseConnection_pgsql::__construct + * @see DatabaseConnection_sqlite::__construct + * + * Database configuration format: + * @code + * $databases['default']['default'] = array( + * 'driver' => 'mysql', + * 'database' => 'databasename', + * 'username' => 'username', + * 'password' => 'password', + * 'host' => 'localhost', + * 'prefix' => '', + * ); + * $databases['default']['default'] = array( + * 'driver' => 'pgsql', + * 'database' => 'databasename', + * 'username' => 'username', + * 'password' => 'password', + * 'host' => 'localhost', + * 'prefix' => '', + * ); + * $databases['default']['default'] = array( + * 'driver' => 'sqlite', + * 'database' => '/path/to/databasefilename', + * ); + * @endcode + */ +$databases = array ( + 'default' => + array ( + 'default' => + array ( + 'database' => 'shop', + 'username' => 'shop', + 'password' => 't4U8qCeD', + 'unix_socket' => '/var/run/mysqld/mysqld.sock', + #'host' => 'mysqlserver1p.fsf.org', + #'port' => '', + 'driver' => 'mysql', + 'prefix' => 'shop_', + ), + ), +); + +$databases['civicrm']['default'] = array ( + 'database' => 'civicrm', + 'username' => 'drupal', + 'password' => 'v8pBxyjED2WKQ', + 'host' => 'mysqlserver1p.fsf.org', + 'port' => '', + 'driver' => 'mysql', + // 'prefix' => 'trustcommerce_', +); + + +/** + * Access control for update.php script. + * + * If you are updating your Drupal installation using the update.php script but + * are not logged in using either an account with the "Administer software + * updates" permission or the site maintenance account (the account that was + * created during installation), you will need to modify the access check + * statement below. Change the FALSE to a TRUE to disable the access check. + * After finishing the upgrade, be sure to open this file again and change the + * TRUE back to a FALSE! + */ +$update_free_access = FALSE; + +/** + * Salt for one-time login links and cancel links, form tokens, etc. + * + * This variable will be set to a random value by the installer. All one-time + * login links will be invalidated if the value is changed. Note that if your + * site is deployed on a cluster of web servers, you must ensure that this + * variable has the same value on each server. If this variable is empty, a hash + * of the serialized database credentials will be used as a fallback salt. + * + * For enhanced security, you may set this variable to a value using the + * contents of a file outside your docroot that is never saved together + * with any backups of your Drupal files and database. + * + * Example: + * $drupal_hash_salt = file_get_contents('/home/example/salt.txt'); + * + */ +$drupal_hash_salt = '5sPDitmloezO2nGiVb2BvB93GKfqFGBgYeqZLHxKRJg'; + +/** + * Base URL (optional). + * + * If Drupal is generating incorrect URLs on your site, which could + * be in HTML headers (links to CSS and JS files) or visible links on pages + * (such as in menus), uncomment the Base URL statement below (remove the + * leading hash sign) and fill in the absolute URL to your Drupal installation. + * + * You might also want to force users to use a given domain. + * See the .htaccess file for more information. + * + * Examples: + * $base_url = 'http://www.example.com'; + * $base_url = 'http://www.example.com:8888'; + * $base_url = 'http://www.example.com/drupal'; + * $base_url = 'https://www.example.com:8888/drupal'; + * + * It is not allowed to have a trailing slash; Drupal will add it + * for you. + */ +$base_url = 'https://shopserver1p.fsf.org'; // NO trailing slash! + +/** + * PHP settings: + * + * To see what PHP settings are possible, including whether they can be set at + * runtime (by using ini_set()), read the PHP documentation: + * http://www.php.net/manual/ini.list.php + * See drupal_environment_initialize() in includes/bootstrap.inc for required + * runtime settings and the .htaccess file for non-runtime settings. Settings + * defined there should not be duplicated here so as to avoid conflict issues. + */ + +/** + * Some distributions of Linux (most notably Debian) ship their PHP + * installations with garbage collection (gc) disabled. Since Drupal depends on + * PHP's garbage collection for clearing sessions, ensure that garbage + * collection occurs by using the most common settings. + */ +ini_set('session.gc_probability', 1); +ini_set('session.gc_divisor', 100); + +/** + * Set session lifetime (in seconds), i.e. the time from the user's last visit + * to the active session may be deleted by the session garbage collector. When + * a session is deleted, authenticated users are logged out, and the contents + * of the user's $_SESSION variable is discarded. + */ +ini_set('session.gc_maxlifetime', 200000); + +/** + * Set session cookie lifetime (in seconds), i.e. the time from the session is + * created to the cookie expires, i.e. when the browser is expected to discard + * the cookie. The value 0 means "until the browser is closed". + */ +ini_set('session.cookie_lifetime', 2000000); + +/** + * If you encounter a situation where users post a large amount of text, and + * the result is stripped out upon viewing but can still be edited, Drupal's + * output filter may not have sufficient memory to process it. If you + * experience this issue, you may wish to uncomment the following two lines + * and increase the limits of these variables. For more information, see + * http://php.net/manual/pcre.configuration.php. + */ +# ini_set('pcre.backtrack_limit', 200000); +# ini_set('pcre.recursion_limit', 200000); + +/** + * Drupal automatically generates a unique session cookie name for each site + * based on its full domain name. If you have multiple domains pointing at the + * same Drupal site, you can either redirect them all to a single domain (see + * comment in .htaccess), or uncomment the line below and specify their shared + * base domain. Doing so assures that users remain logged in as they cross + * between your various domains. Make sure to always start the $cookie_domain + * with a leading dot, as per RFC 2109. + */ +# $cookie_domain = '.example.com'; + +/** + * Variable overrides: + * + * To override specific entries in the 'variable' table for this site, + * set them here. You usually don't need to use this feature. This is + * useful in a configuration file for a vhost or directory, rather than + * the default settings.php. Any configuration setting from the 'variable' + * table can be given a new value. Note that any values you provide in + * these variable overrides will not be modifiable from the Drupal + * administration interface. + * + * The following overrides are examples: + * - site_name: Defines the site's name. + * - theme_default: Defines the default theme for this site. + * - anonymous: Defines the human-readable name of anonymous users. + * Remove the leading hash signs to enable. + */ +# $conf['site_name'] = 'My Drupal site'; +# $conf['theme_default'] = 'garland'; +# $conf['anonymous'] = 'Visitor'; + +/** + * A custom theme can be set for the offline page. This applies when the site + * is explicitly set to maintenance mode through the administration page or when + * the database is inactive due to an error. It can be set through the + * 'maintenance_theme' key. The template file should also be copied into the + * theme. It is located inside 'modules/system/maintenance-page.tpl.php'. + * Note: This setting does not apply to installation and update pages. + */ +# $conf['maintenance_theme'] = 'bartik'; + +/** + * Reverse Proxy Configuration: + * + * Reverse proxy servers are often used to enhance the performance + * of heavily visited sites and may also provide other site caching, + * security, or encryption benefits. In an environment where Drupal + * is behind a reverse proxy, the real IP address of the client should + * be determined such that the correct client IP address is available + * to Drupal's logging, statistics, and access management systems. In + * the most simple scenario, the proxy server will add an + * X-Forwarded-For header to the request that contains the client IP + * address. However, HTTP headers are vulnerable to spoofing, where a + * malicious client could bypass restrictions by setting the + * X-Forwarded-For header directly. Therefore, Drupal's proxy + * configuration requires the IP addresses of all remote proxies to be + * specified in $conf['reverse_proxy_addresses'] to work correctly. + * + * Enable this setting to get Drupal to determine the client IP from + * the X-Forwarded-For header (or $conf['reverse_proxy_header'] if set). + * If you are unsure about this setting, do not have a reverse proxy, + * or Drupal operates in a shared hosting environment, this setting + * should remain commented out. + * + * In order for this setting to be used you must specify every possible + * reverse proxy IP address in $conf['reverse_proxy_addresses']. + * If a complete list of reverse proxies is not available in your + * environment (for example, if you use a CDN) you may set the + * $_SERVER['REMOTE_ADDR'] variable directly in settings.php. + * Be aware, however, that it is likely that this would allow IP + * address spoofing unless more advanced precautions are taken. + */ +# $conf['reverse_proxy'] = TRUE; + +/** + * Specify every reverse proxy IP address in your environment. + * This setting is required if $conf['reverse_proxy'] is TRUE. + */ +# $conf['reverse_proxy_addresses'] = array('a.b.c.d', ...); + +/** + * Set this value if your proxy server sends the client IP in a header + * other than X-Forwarded-For. + */ +# $conf['reverse_proxy_header'] = 'HTTP_X_CLUSTER_CLIENT_IP'; + +/** + * Page caching: + * + * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page + * views. This tells a HTTP proxy that it may return a page from its local + * cache without contacting the web server, if the user sends the same Cookie + * header as the user who originally requested the cached page. Without "Vary: + * Cookie", authenticated users would also be served the anonymous page from + * the cache. If the site has mostly anonymous users except a few known + * editors/administrators, the Vary header can be omitted. This allows for + * better caching in HTTP proxies (including reverse proxies), i.e. even if + * clients send different cookies, they still get content served from the cache. + * However, authenticated users should access the site directly (i.e. not use an + * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid + * getting cached pages from the proxy. + */ +# $conf['omit_vary_cookie'] = TRUE; + +/** + * CSS/JS aggregated file gzip compression: + * + * By default, when CSS or JS aggregation and clean URLs are enabled Drupal will + * store a gzip compressed (.gz) copy of the aggregated files. If this file is + * available then rewrite rules in the default .htaccess file will serve these + * files to browsers that accept gzip encoded content. This allows pages to load + * faster for these users and has minimal impact on server load. If you are + * using a webserver other than Apache httpd, or a caching reverse proxy that is + * configured to cache and compress these files itself you may want to uncomment + * one or both of the below lines, which will prevent gzip files being stored. + */ +# $conf['css_gzip_compression'] = FALSE; +# $conf['js_gzip_compression'] = FALSE; + +/** + * Block caching: + * + * Block caching may not be compatible with node access modules depending on + * how the original block cache policy is defined by the module that provides + * the block. By default, Drupal therefore disables block caching when one or + * more modules implement hook_node_grants(). If you consider block caching to + * be safe on your site and want to bypass this restriction, uncomment the line + * below. + */ +# $conf['block_cache_bypass_node_grants'] = TRUE; + +/** + * String overrides: + * + * To override specific strings on your site with or without enabling the Locale + * module, add an entry to this list. This functionality allows you to change + * a small number of your site's default English language interface strings. + * + * Remove the leading hash signs to enable. + */ +# $conf['locale_custom_strings_en'][''] = array( +# 'forum' => 'Discussion board', +# '@count min' => '@count minutes', +# ); + +/** + * + * IP blocking: + * + * To bypass database queries for denied IP addresses, use this setting. + * Drupal queries the {blocked_ips} table by default on every page request + * for both authenticated and anonymous users. This allows the system to + * block IP addresses from within the administrative interface and before any + * modules are loaded. However on high traffic websites you may want to avoid + * this query, allowing you to bypass database access altogether for anonymous + * users under certain caching configurations. + * + * If using this setting, you will need to add back any IP addresses which + * you may have blocked via the administrative interface. Each element of this + * array represents a blocked IP address. Uncommenting the array and leaving it + * empty will have the effect of disabling IP blocking on your site. + * + * Remove the leading hash signs to enable. + */ +# $conf['blocked_ips'] = array( +# 'a.b.c.d', +# ); + +/** + * Fast 404 pages: + * + * Drupal can generate fully themed 404 pages. However, some of these responses + * are for images or other resource files that are not displayed to the user. + * This can waste bandwidth, and also generate server load. + * + * The options below return a simple, fast 404 page for URLs matching a + * specific pattern: + * - 404_fast_paths_exclude: A regular expression to match paths to exclude, + * such as images generated by image styles, or dynamically-resized images. + * If you need to add more paths, you can add '|path' to the expression. + * - 404_fast_paths: A regular expression to match paths that should return a + * simple 404 page, rather than the fully themed 404 page. If you don't have + * any aliases ending in htm or html you can add '|s?html?' to the expression. + * - 404_fast_html: The html to return for simple 404 pages. + * + * Add leading hash signs if you would like to disable this functionality. + */ +$conf['404_fast_paths_exclude'] = '/\/(?:styles)\//'; +$conf['404_fast_paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i'; +$conf['404_fast_html'] = '404 Not Found

Not Found

The requested URL "@path" was not found on this server.

'; + +/** + * By default the page request process will return a fast 404 page for missing + * files if they match the regular expression set in '404_fast_paths' and not + * '404_fast_paths_exclude' above. 404 errors will simultaneously be logged in + * the Drupal system log. + * + * You can choose to return a fast 404 page earlier for missing pages (as soon + * as settings.php is loaded) by uncommenting the line below. This speeds up + * server response time when loading 404 error pages and prevents the 404 error + * from being logged in the Drupal system log. In order to prevent valid pages + * such as image styles and other generated content that may match the + * '404_fast_paths' regular expression from returning 404 errors, it is + * necessary to add them to the '404_fast_paths_exclude' regular expression + * above. Make sure that you understand the effects of this feature before + * uncommenting the line below. + */ +# drupal_fast_404(); + +/** + * External access proxy settings: + * + * If your site must access the Internet via a web proxy then you can enter + * the proxy settings here. Currently only basic authentication is supported + * by using the username and password variables. The proxy_user_agent variable + * can be set to NULL for proxies that require no User-Agent header or to a + * non-empty string for proxies that limit requests to a specific agent. The + * proxy_exceptions variable is an array of host names to be accessed directly, + * not via proxy. + */ +# $conf['proxy_server'] = ''; +# $conf['proxy_port'] = 8080; +# $conf['proxy_username'] = ''; +# $conf['proxy_password'] = ''; +# $conf['proxy_user_agent'] = ''; +# $conf['proxy_exceptions'] = array('127.0.0.1', 'localhost'); + +/** + * Authorized file system operations: + * + * The Update manager module included with Drupal provides a mechanism for + * site administrators to securely install missing updates for the site + * directly through the web user interface. On securely-configured servers, + * the Update manager will require the administrator to provide SSH or FTP + * credentials before allowing the installation to proceed; this allows the + * site to update the new files as the user who owns all the Drupal files, + * instead of as the user the webserver is running as. On servers where the + * webserver user is itself the owner of the Drupal files, the administrator + * will not be prompted for SSH or FTP credentials (note that these server + * setups are common on shared hosting, but are inherently insecure). + * + * Some sites might wish to disable the above functionality, and only update + * the code directly via SSH or FTP themselves. This setting completely + * disables all functionality related to these authorized file operations. + * + * @see http://drupal.org/node/244924 + * + * Remove the leading hash signs to disable. + */ +# $conf['allow_authorize_operations'] = FALSE; + +# quidam Mon Aug 29 13:36:47 EDT 2016 +$conf['locale_custom_strings_en'][''] = array( +'Proudly built by Commerce Guys' => '', +'Proudly built by' => '', +'Update email/password' => 'Update email', +); + +# quidam Wed Dec 7 11:29:15 EST 2016 +# Allows for images to be generated on the fly in different styles https://www.drupal.org/node/1934498#comment-11679983 +$conf['image_suppress_itok_output'] = TRUE; +$conf['image_allow_insecure_derivatives'] = TRUE; +# iank rt 1308963 +$conf['page_compression'] = FALSE; -- 2.25.1