Previously a spurious "250 OK id=" response was appended to the proper
failure response.
+JH/08 The "support for" informational output now, which built with Content
+ Scanning support, has a line for the malware scanner interfaces compiled
+ in. Interface can be individually included or not at build time.
+
Exim version 4.90
-----------------
2. DANE is now supported under GnuTLS version 3.0.0 or later (adding to the
previous OpenSSL implementation, but still Experimental).
+ 3. Feature macros for the compiled-in set of malware scanner interfaces.
+
Version 4.90
------------
macro-manualroute.o macro-queryprogram.o macro-redirect.o \
macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \
macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-tls.o\
- macro-dkim.o
+ macro-dkim.o macro-malware.o
$(OBJ_MACRO): $(MACRO_HSRC)
macro-dkim.o: dkim.c
@echo "$(CC) -DMACRO_PREDEF dkim.c"
$(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
+macro-malware.o: malware.c
+ @echo "$(CC) -DMACRO_PREDEF malware.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
macro_predef: $(OBJ_MACRO)
@echo "$(LNCC) -o $@"
# WITH_CONTENT_SCAN=yes
+# If you have content scanning you may wish to only include some of the scanner
+# interfaces. Uncomment any of these lines to remove that code.
+
+# DISABLE_MAL_FFROTD=yes
+# DISABLE_MAL_FFROT6D=yes
+# DISABLE_MAL_DRWEB=yes
+# DISABLE_MAL_AVE=yes
+# DISABLE_MAL_FSECURE=yes
+# DISABLE_MAL_KAV=yes
+# DISABLE_MAL_SOPHIE=yes
+# DISABLE_MAL_CLAM=yes
+# DISABLE_MAL_MKS=yes
+# DISABLE_MAL_AVAST=yes
+# DISABLE_MAL_SOCK=yes
+# DISABLE_MAL_CMDLINE=yes
+
+
#------------------------------------------------------------------------------
# If you're using ClamAV and are backporting fixes to an old version, instead
# of staying current (which is the more usual approach) then you may need to
*************************************************/
/* Copyright (c) University of Cambridge 1995 - 2017 */
+/* Copyright (c) The Exim Maintainers 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* The default settings for Exim configuration variables. A #define without
#define WHITELIST_D_MACROS
#define WITH_CONTENT_SCAN
+#define DISABLE_MAL_FFROTD
+#define DISABLE_MAL_FFROT6D
+#define DISABLE_MAL_DRWEB
+#define DISABLE_MAL_AVE
+#define DISABLE_MAL_FSECURE
+#define DISABLE_MAL_KAV
+#define DISABLE_MAL_SOPHIE
+#define DISABLE_MAL_CLAM
+#define DISABLE_MAL_MKS
+#define DISABLE_MAL_AVAST
+#define DISABLE_MAL_SOCK
+#define DISABLE_MAL_CMDLINE
#define WITH_OLD_CLAMAV_STREAM
/* EXPERIMENTAL features */
fprintf(f, " TCPwrappers");
#endif
#ifdef SUPPORT_TLS
- #ifdef USE_GNUTLS
+# ifdef USE_GNUTLS
fprintf(f, " GnuTLS");
- #else
+# else
fprintf(f, " OpenSSL");
- #endif
+# endif
#endif
#ifdef SUPPORT_TRANSLATE_IP_ADDRESS
fprintf(f, " translate_ip_address");
route_show_supported(f);
transport_show_supported(f);
+#ifdef WITH_CONTENT_SCAN
+malware_show_supported(f);
+#endif
+
if (fixed_never_users[0] > 0)
{
int i;
extern int malware(const uschar *, int);
extern int malware_in_file(uschar *);
extern void malware_init(void);
+extern void malware_show_supported(FILE *);
#endif
extern int match_address_list(const uschar *, BOOL, BOOL, const uschar **,
unsigned int *, int, int, const uschar **);
}
+/* restricted snprintf */
void
spf(uschar * buf, int len, const uschar * fmt, ...)
{
builtin_macro_create(US"_HAVE_TRANSPORT_APPEND_MBX");
# endif
#endif
+
+#ifdef WITH_CONTENT_SCAN
+features_malware();
+#endif
}
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) Jeremy Harris 2017 */
+/* Copyright (c) Jeremy Harris 2017 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* Global functions */
extern void builtin_macro_create_var(const uschar *, const uschar *);
extern void options_from_list(optionlist *, unsigned, const uschar *, uschar *);
+extern void features_malware(void);
extern void options_main(void);
extern void options_routers(void);
extern void options_transports(void);
/* Copyright (c) Tom Kistner <tom@duncanthrax.net> 2003 - 2015
* License: GPL
- * Copyright (c) The Exim Maintainers 2017
+ * Copyright (c) The Exim Maintainers 2017 - 2018
*/
/* Code for calling virus (malware) scanners. Called from acl.c. */
#include "exim.h"
-#ifdef WITH_CONTENT_SCAN
+#ifdef WITH_CONTENT_SCAN /* entire file */
typedef enum {M_FPROTD, M_DRWEB, M_AVES, M_FSEC, M_KAVD, M_CMDL,
M_SOPHIE, M_CLAMD, M_SOCK, M_MKSD, M_AVAST, M_FPROT6D} scanner_t;
contype_t conn;
} m_scans[] =
{
+#ifndef DISABLE_MAL_FFROTD
{ M_FPROTD, US"f-protd", US"localhost 10200-10204", MC_TCP },
+#endif
+#ifndef DISABLE_MAL_FFROT6D
+ { M_FPROT6D, US"f-prot6d", US"localhost 10200", MC_TCP },
+#endif
+#ifndef DISABLE_MAL_DRWEB
{ M_DRWEB, US"drweb", US"/usr/local/drweb/run/drwebd.sock", MC_STRM },
+#endif
+#ifndef DISABLE_MAL_AVE
{ M_AVES, US"aveserver", US"/var/run/aveserver", MC_UNIX },
+#endif
+#ifndef DISABLE_MAL_FSECURE
{ M_FSEC, US"fsecure", US"/var/run/.fsav", MC_UNIX },
+#endif
+#ifndef DISABLE_MAL_KAV
{ M_KAVD, US"kavdaemon", US"/var/run/AvpCtl", MC_UNIX },
- { M_CMDL, US"cmdline", NULL, MC_NONE },
+#endif
+#ifndef DISABLE_MAL_SOPHIE
{ M_SOPHIE, US"sophie", US"/var/run/sophie", MC_UNIX },
+#endif
+#ifndef DISABLE_MAL_CLAM
{ M_CLAMD, US"clamd", US"/tmp/clamd", MC_NONE },
- { M_SOCK, US"sock", US"/tmp/malware.sock", MC_STRM },
+#endif
+#ifndef DISABLE_MAL_MKS
{ M_MKSD, US"mksd", NULL, MC_NONE },
+#endif
+#ifndef DISABLE_MAL_AVAST
{ M_AVAST, US"avast", US"/var/run/avast/scan.sock", MC_STRM },
- { M_FPROT6D, US"f-prot6d", US"localhost 10200", MC_TCP },
+#endif
+#ifndef DISABLE_MAL_SOCK
+ { M_SOCK, US"sock", US"/tmp/malware.sock", MC_STRM },
+#endif
+#ifndef DISABLE_MAL_CMDLINE
+ { M_CMDL, US"cmdline", NULL, MC_NONE },
+#endif
{ -1, NULL, NULL, MC_NONE } /* end-marker */
};
+/******************************************************************************/
+# ifdef MACRO_PREDEF /* build solely to predefine macros */
+
+# include "macro_predef.h"
+
+void
+features_malware(void)
+{
+struct scan * sc;
+uschar * s, * t;
+uschar buf[64];
+
+spf(buf, sizeof(buf), US"_HAVE_MALWARE_");
+
+for (sc = m_scans; sc->scancode != -1; sc++)
+ {
+ for(s = sc->name, t = buf+14; *s; s++) if (*s != '-') *t++ = toupper(*s);
+ *t = '\0';
+ builtin_macro_create(buf);
+ }
+}
+
+/******************************************************************************/
+# else /*!MACRO_PREDEF, main build*/
+
+
+#define MALWARE_TIMEOUT 120 /* default timeout, seconds */
+
+static const uschar * malware_regex_default = US ".+";
+static const pcre * malware_default_re = NULL;
+
+
+
+#ifndef DISABLE_MAL_CLAM
/* The maximum number of clamd servers that are supported in the configuration */
-#define MAX_CLAMD_SERVERS 32
-#define MAX_CLAMD_SERVERS_S "32"
+# define MAX_CLAMD_SERVERS 32
+# define MAX_CLAMD_SERVERS_S "32"
typedef struct clamd_address {
uschar * hostspec;
unsigned tcp_port;
unsigned retry;
} clamd_address;
-
-#ifndef nelements
-# define nelements(arr) (sizeof(arr) / sizeof(arr[0]))
#endif
-#define MALWARE_TIMEOUT 120 /* default timeout, seconds */
-
-
-#define DRWEBD_SCAN_CMD (1) /* scan file, buffer or diskfile */
-#define DRWEBD_RETURN_VIRUSES (1<<0) /* ask daemon return to us viruses names from report */
-#define DRWEBD_IS_MAIL (1<<19) /* say to daemon that format is "archive MAIL" */
+#ifndef DISABLE_MAL_DRWEB
+# define DRWEBD_SCAN_CMD (1) /* scan file, buffer or diskfile */
+# define DRWEBD_RETURN_VIRUSES (1<<0) /* ask daemon return to us viruses names from report */
+# define DRWEBD_IS_MAIL (1<<19) /* say to daemon that format is "archive MAIL" */
-#define DERR_READ_ERR (1<<0) /* read error */
-#define DERR_NOMEMORY (1<<2) /* no memory */
-#define DERR_TIMEOUT (1<<9) /* scan timeout has run out */
-#define DERR_BAD_CALL (1<<15) /* wrong command */
-
-
-static const uschar * malware_regex_default = US ".+";
-static const pcre * malware_default_re = NULL;
+# define DERR_READ_ERR (1<<0) /* read error */
+# define DERR_NOMEMORY (1<<2) /* no memory */
+# define DERR_TIMEOUT (1<<9) /* scan timeout has run out */
+# define DERR_BAD_CALL (1<<15) /* wrong command */
static const uschar * drweb_re_str = US "infected\\swith\\s*(.+?)$";
static const pcre * drweb_re = NULL;
+#endif
+#ifndef DISABLE_MAL_FSECURE
static const uschar * fsec_re_str = US "\\S{0,5}INFECTED\\t[^\\t]*\\t([^\\t]+)\\t\\S*$";
static const pcre * fsec_re = NULL;
+#endif
+#ifndef DISABLE_MAL_KAV
static const uschar * kav_re_sus_str = US "suspicion:\\s*(.+?)\\s*$";
static const uschar * kav_re_inf_str = US "infected:\\s*(.+?)\\s*$";
static const pcre * kav_re_sus = NULL;
static const pcre * kav_re_inf = NULL;
+#endif
+#ifndef DISABLE_MAL_AVAST
static const uschar * ava_re_clean_str = US "(?!\\\\)\\t\\[\\+\\]";
static const uschar * ava_re_virus_str = US "(?!\\\\)\\t\\[L\\]\\d\\.\\d\\t\\d\\s(.*)";
static const pcre * ava_re_clean = NULL;
static const pcre * ava_re_virus = NULL;
+#endif
+#ifndef DISABLE_MAL_FFROT6D
static const uschar * fprot6d_re_error_str = US "^\\d+\\s<(.+?)>$";
static const uschar * fprot6d_re_virus_str = US "^\\d+\\s<infected:\\s+(.+?)>\\s+.+$";
static const pcre * fprot6d_re_error = NULL;
static const pcre * fprot6d_re_virus = NULL;
+#endif
/*************************************************/
+#ifndef DISABLE_MAL_CLAM
/* Only used by the Clamav code, which is working from a list of servers and
uses the returned in_addr to get a second connection to the same system.
*/
return ip_connectedsocket(SOCK_STREAM, hostname, port, port, 5,
host, errstr, fastopen_blob);
}
+#endif
static int
m_sock_send(int sock, uschar * buf, int cnt, uschar ** errstr)
{
int ovector[10*3];
int i = pcre_exec(cre, NULL, CS text, Ustrlen(text), 0, 0,
- ovector, nelements(ovector));
+ ovector, nelem(ovector));
uschar * substr = NULL;
if (i >= 2) /* Got it */
pcre_get_substring(CS text, ovector, i, 1, (const char **) &substr);
+#ifndef DISABLE_MAL_MKS
/* ============= private routines for the "mksd" scanner type ============== */
-#include <sys/uio.h>
+# include <sys/uio.h>
static inline int
mksd_writev (int sock, struct iovec * iov, int iovcnt)
return mksd_parse_line (scanent, CS av_buffer);
}
+#endif /* MKSD */
+#ifndef DISABLE_MAL_CLAM
static int
clamd_option(clamd_address * cd, const uschar * optstr, int * subsep)
{
return FAIL;
return OK;
}
+#endif
+
+
/*************************************************
* Scan content for malware *
switch (scanent->scancode)
{
+#ifndef DISABLE_MAL_FFROTD
case M_FPROTD: /* "f-protd" scanner type -------------------------------- */
{
uschar *fp_scan_option;
}
break;
} /* f-protd */
+#endif
+
+#ifndef DISABLE_MAL_FFROT6D
+ case M_FPROT6D: /* "f-prot6d" scanner type ----------------------------------- */
+ {
+ int bread;
+ uschar * e;
+ uschar * linebuffer;
+ uschar * scanrequest;
+ uschar av_buffer[1024];
+
+ if ((!fprot6d_re_virus && !(fprot6d_re_virus = m_pcre_compile(fprot6d_re_virus_str, &errstr)))
+ || (!fprot6d_re_error && !(fprot6d_re_error = m_pcre_compile(fprot6d_re_error_str, &errstr))))
+ return malware_errlog_defer(errstr);
+
+ scanrequest = string_sprintf("SCAN FILE %s\n", eml_filename);
+ DEBUG(D_acl) debug_printf_indent("Malware scan: issuing %s: %s\n",
+ scanner_name, scanrequest);
+
+ if (m_sock_send(sock, scanrequest, Ustrlen(scanrequest), &errstr) < 0)
+ return m_errlog_defer(scanent, CUS callout_address, errstr);
+
+ bread = ip_recv(sock, av_buffer, sizeof(av_buffer), tmo-time(NULL));
+
+ if (bread <= 0)
+ return m_errlog_defer_3(scanent, CUS callout_address,
+ string_sprintf("unable to read from socket (%s)", strerror(errno)),
+ sock);
+
+ if (bread == sizeof(av_buffer))
+ return m_errlog_defer_3(scanent, CUS callout_address,
+ US"buffer too small", sock);
+
+ av_buffer[bread] = '\0';
+ linebuffer = string_copy(av_buffer);
+
+ m_sock_send(sock, US"QUIT\n", 5, 0);
+
+ if ((e = m_pcre_exec(fprot6d_re_error, linebuffer)))
+ return m_errlog_defer_3(scanent, CUS callout_address,
+ string_sprintf("scanner reported error (%s)", e), sock);
+ if (!(malware_name = m_pcre_exec(fprot6d_re_virus, linebuffer)))
+ malware_name = NULL;
+
+ break;
+ } /* f-prot6d */
+#endif
+
+#ifndef DISABLE_MAL_DRWEB
case M_DRWEB: /* "drweb" scanner type ----------------------------------- */
/* v0.1 - added support for tcp sockets */
/* v0.0 - initial release -- support for unix sockets */
/* try matcher on the line, grab substring */
result = pcre_exec(drweb_re, NULL, CS tmpbuf, Ustrlen(tmpbuf), 0, 0,
- ovector, nelements(ovector));
+ ovector, nelem(ovector));
if (result >= 2)
{
const char * pre_malware_nb;
}
break;
} /* drweb */
+#endif
+#ifndef DISABLE_MAL_AVE
case M_AVES: /* "aveserver" scanner type -------------------------------- */
{
uschar buf[32768];
}
break;
} /* aveserver */
+#endif
+#ifndef DISABLE_MAL_FSECURE
case M_FSEC: /* "fsecure" scanner type ---------------------------------- */
{
int i, j, bread = 0;
scanner_name, scanner_options);
/* pass options */
memset(av_buffer, 0, sizeof(av_buffer));
- for (i = 0; i != nelements(cmdopt); i++)
+ for (i = 0; i != nelem(cmdopt); i++)
{
if (m_sock_send(sock, cmdopt[i], Ustrlen(cmdopt[i]), &errstr) < 0)
fsec_found:
break;
} /* fsecure */
+#endif
+#ifndef DISABLE_MAL_KAV
case M_KAVD: /* "kavdaemon" scanner type -------------------------------- */
{
time_t t;
break;
}
+#endif
+#ifndef DISABLE_MAL_CMDLINE
case M_CMDL: /* "cmdline" scanner type ---------------------------------- */
{
const uschar *cmdline_scanner = scanner_options;
malware_name = NULL;
break;
} /* cmdline */
+#endif
+#ifndef DISABLE_MAL_SOPHIE
case M_SOPHIE: /* "sophie" scanner type --------------------------------- */
{
int bread = 0;
break;
}
+#endif
+#ifndef DISABLE_MAL_CLAM
case M_CLAMD: /* "clamd" scanner type ----------------------------------- */
{
/* This code was originally contributed by David Saez */
break;
} /* clamd */
+#endif
+#ifndef DISABLE_MAL_SOCK
case M_SOCK: /* "sock" scanner type ------------------------------------- */
/* This code was derived by Martin Poole from the clamd code contributed
by David Saez and the cmdline code
malware_name = NULL;
break;
}
+#endif
+#ifndef DISABLE_MAL_MKS
case M_MKSD: /* "mksd" scanner type ------------------------------------- */
{
char *mksd_options_end;
}
break;
}
+#endif
+#ifndef DISABLE_MAL_AVAST
case M_AVAST: /* "avast" scanner type ----------------------------------- */
{
int ovector[1*3];
break; /* ignore the "210 SCAN DATA" message */
if (pcre_exec(ava_re_clean, NULL, CS buf, slen,
- 0, 0, ovector, nelements(ovector)) > 0)
+ 0, 0, ovector, nelem(ovector)) > 0)
break;
if ((malware_name = m_pcre_exec(ava_re_virus, buf)))
}
break;
}
-
- case M_FPROT6D: /* "f-prot6d" scanner type ----------------------------------- */
- {
- int bread;
- uschar * e;
- uschar * linebuffer;
- uschar * scanrequest;
- uschar av_buffer[1024];
-
- if ((!fprot6d_re_virus && !(fprot6d_re_virus = m_pcre_compile(fprot6d_re_virus_str, &errstr)))
- || (!fprot6d_re_error && !(fprot6d_re_error = m_pcre_compile(fprot6d_re_error_str, &errstr))))
- return malware_errlog_defer(errstr);
-
- scanrequest = string_sprintf("SCAN FILE %s\n", eml_filename);
- DEBUG(D_acl) debug_printf_indent("Malware scan: issuing %s: %s\n",
- scanner_name, scanrequest);
-
- if (m_sock_send(sock, scanrequest, Ustrlen(scanrequest), &errstr) < 0)
- return m_errlog_defer(scanent, CUS callout_address, errstr);
-
- bread = ip_recv(sock, av_buffer, sizeof(av_buffer), tmo-time(NULL));
-
- if (bread <= 0)
- return m_errlog_defer_3(scanent, CUS callout_address,
- string_sprintf("unable to read from socket (%s)", strerror(errno)),
- sock);
-
- if (bread == sizeof(av_buffer))
- return m_errlog_defer_3(scanent, CUS callout_address,
- US"buffer too small", sock);
-
- av_buffer[bread] = '\0';
- linebuffer = string_copy(av_buffer);
-
- m_sock_send(sock, US"QUIT\n", 5, 0);
-
- if ((e = m_pcre_exec(fprot6d_re_error, linebuffer)))
- return m_errlog_defer_3(scanent, CUS callout_address,
- string_sprintf("scanner reported error (%s)", e), sock);
-
- if (!(malware_name = m_pcre_exec(fprot6d_re_virus, linebuffer)))
- malware_name = NULL;
-
- break;
- } /* f-prot6d */
+#endif
} /* scanner type switch */
if (sock >= 0)
{
if (!malware_default_re)
malware_default_re = regex_must_compile(malware_regex_default, FALSE, TRUE);
+
+#ifndef DISABLE_MAL_DRWEB
if (!drweb_re)
drweb_re = regex_must_compile(drweb_re_str, FALSE, TRUE);
+#endif
+#ifndef DISABLE_MAL_FSECURE
if (!fsec_re)
fsec_re = regex_must_compile(fsec_re_str, FALSE, TRUE);
+#endif
+#ifndef DISABLE_MAL_KAV
if (!kav_re_sus)
kav_re_sus = regex_must_compile(kav_re_sus_str, FALSE, TRUE);
if (!kav_re_inf)
kav_re_inf = regex_must_compile(kav_re_inf_str, FALSE, TRUE);
+#endif
+#ifndef DISABLE_MAL_AVA
if (!ava_re_clean)
ava_re_clean = regex_must_compile(ava_re_clean_str, FALSE, TRUE);
if (!ava_re_virus)
ava_re_virus = regex_must_compile(ava_re_virus_str, FALSE, TRUE);
+#endif
+#ifndef DISABLE_MAL_FPROT6D
if (!fprot6d_re_error)
fprot6d_re_error = regex_must_compile(fprot6d_re_error_str, FALSE, TRUE);
if (!fprot6d_re_virus)
fprot6d_re_virus = regex_must_compile(fprot6d_re_virus_str, FALSE, TRUE);
+#endif
+}
+
+
+void
+malware_show_supported(FILE * f)
+{
+struct scan * sc;
+fprintf(f, "Malware:");
+for (sc = m_scans; sc->scancode != -1; sc++) fprintf(f, " %s", sc->name);
+fprintf(f, "\n");
}
+
+# endif /*!MACRO_PREDEF*/
#endif /*WITH_CONTENT_SCAN*/
/*
* vi: aw ai sw=2
-# Exim test configuration 4001
-# Content-scan: f-protd interface
+# Exim test configuration 4001: ACL regex=
.include DIR/aux-var/std_conf_prefix
primary_hostname = myhost.test.ex
+rfc1413_query_timeout = 0s
-av_scanner = f-protd : localhost4 PORT_S
# ----- Main settings -----
-acl_smtp_rcpt = accept
-acl_smtp_data = c_data
+acl_smtp_rcpt = check_rcpt
+acl_smtp_data = check_data
+acl_not_smtp = check_data
+
+
+# ----- ACL -----
begin acl
-c_data:
- accept !malware = * OPT
- deny logwrite = $callout_address malware_name $malware_name
+check_rcpt:
+ accept
+
+check_data:
+ warn regex = \N(THIS\s((\w+)\s)?REGEX)\N
+ message = X-Regex: Regex matched <$regex1> <$regex3>
+
+ warn condition = ${if !eq{$h_fakereject:}{}}
+ control = fakereject
+
+ warn condition = ${if !eq{$h_fakedefer:}{}}
+ control = fakedefer
+
+ accept
# ----- Routers -----
begin routers
-r:
- driver = redirect
- data = :blackhole:
+r1:
+ driver = accept
+ transport = t1
+
+# ----- Transports -----
+
+begin transports
+
+t1:
+ driver = appendfile
+ file = DIR/test-mail/$local_part
+ user = CALLER
+
# End
# Exim test configuration 4002
-# Content-scan: aveserver interface
+# Content-scan: spamassassin interface
+
+OPT= 127.0.0.1 7833
.include DIR/aux-var/std_conf_prefix
log_selector = +subject
primary_hostname = myhost.test.ex
-av_scanner = aveserver : DIR/eximdir/aveserver_sock
+# we need to set the sender
+trusted_users = CALLER
+
+spamd_address = OPT
# ----- Main settings -----
begin acl
c_data:
- accept !malware = * OPT
- deny logwrite = malware_name $malware_name
+ warn
+ spam = nobody
+ warn
+ log_message = $callout_address $spam_action $spam_report
+ accept
# ----- Routers -----
-# Exim test configuration 4002
-# Content-scan: fsecure interface
+# Exim test configuration 4003
+# Content-scan: rspamd interface
.include DIR/aux-var/std_conf_prefix
log_selector = +subject
primary_hostname = myhost.test.ex
-av_scanner = fsecure : DIR/eximdir/fsec_sock
+spamd_address = 127.0.0.1 11333 variant=rspamd
# ----- Main settings -----
begin acl
c_data:
- accept !malware = <; * OPT
- deny logwrite = malware_name $malware_name
+ warn
+ spam = nobody
+ warn
+ log_message = $spam_action $spam_report
+ accept
# ----- Routers -----
# Exim test configuration 4006
-# Content-scan: avast interface
+# Content-scan: clamav interface
+
+OPT=
+CONTROL=
.include DIR/aux-var/std_conf_prefix
log_selector = +subject
primary_hostname = myhost.test.ex
-av_scanner = avast : DIR/eximdir/avast_sock : OPTION
+#XXX we need an additional test for tcp-connected clamd
+av_scanner = clamd : DIR/eximdir/clam_sock CONTROL
# ----- Main settings -----
begin acl
c_data:
- accept !malware = * INSERT
+ accept !malware = * OPT
deny logwrite = malware_name $malware_name
# ----- Routers -----
# Exim test configuration 4007
-# Content-scan: cmsline interface
+# Content-scan: avast interface
.include DIR/aux-var/std_conf_prefix
log_selector = +subject
primary_hostname = myhost.test.ex
-av_scanner = cmdline : DIR/aux-fixed/TESTNUM.script -o OPT %s : found in file : ^(\S*)
+av_scanner = avast : DIR/eximdir/avast_sock : OPTION
# ----- Main settings -----
# Exim test configuration 4008
-# Content-scan: rspamd interface
+# Content-scan: cmsline interface
.include DIR/aux-var/std_conf_prefix
log_selector = +subject
primary_hostname = myhost.test.ex
-spamd_address = 127.0.0.1 11333 variant=rspamd
+av_scanner = cmdline : DIR/aux-fixed/TESTNUM.script -o OPT %s : found in file : ^(\S*)
# ----- Main settings -----
begin acl
c_data:
- warn
- spam = nobody
- warn
- log_message = $spam_action $spam_report
- accept
+ accept !malware = * INSERT
+ deny logwrite = malware_name $malware_name
# ----- Routers -----
# Exim test configuration 4009
-# Content-scan: spamassassin interface
-
-OPT= 127.0.0.1 7833
+# Content-scan: sophie interface
.include DIR/aux-var/std_conf_prefix
log_selector = +subject
primary_hostname = myhost.test.ex
-# we need to set the sender
-trusted_users = CALLER
-
-spamd_address = OPT
+av_scanner = sophie : DIR/eximdir/sophie_sock
# ----- Main settings -----
begin acl
c_data:
- warn
- spam = nobody
- warn
- log_message = $callout_address $spam_action $spam_report
- accept
+ accept !malware = * OPT
+ deny logwrite = malware_name $malware_name
# ----- Routers -----
-# Exim test configuration 0568: ACL regex=
+# Exim test configuration 4010
+# Content-scan: fsecure interface
.include DIR/aux-var/std_conf_prefix
+log_selector = +subject
primary_hostname = myhost.test.ex
-rfc1413_query_timeout = 0s
+av_scanner = fsecure : DIR/eximdir/fsec_sock
# ----- Main settings -----
-acl_smtp_rcpt = check_rcpt
-acl_smtp_data = check_data
-acl_not_smtp = check_data
-
-
-# ----- ACL -----
+acl_smtp_rcpt = accept
+acl_smtp_data = c_data
begin acl
-check_rcpt:
- accept
-
-check_data:
- warn regex = \N(THIS\s((\w+)\s)?REGEX)\N
- message = X-Regex: Regex matched <$regex1> <$regex3>
-
- warn condition = ${if !eq{$h_fakereject:}{}}
- control = fakereject
-
- warn condition = ${if !eq{$h_fakedefer:}{}}
- control = fakedefer
-
- accept
+c_data:
+ accept !malware = <; * OPT
+ deny logwrite = malware_name $malware_name
# ----- Routers -----
begin routers
-r1:
- driver = accept
- transport = t1
-
-# ----- Transports -----
-
-begin transports
-
-t1:
- driver = appendfile
- file = DIR/test-mail/$local_part
- user = CALLER
-
+r:
+ driver = redirect
+ data = :blackhole:
# End
# Exim test configuration 4011
-# Content-scan: f-prot6d interface
+# Content-scan: aveserver interface
.include DIR/aux-var/std_conf_prefix
+log_selector = +subject
primary_hostname = myhost.test.ex
-av_scanner = f-prot6d : localhost4 PORT_S
+av_scanner = aveserver : DIR/eximdir/aveserver_sock
# ----- Main settings -----
c_data:
accept !malware = * OPT
- deny logwrite = $callout_address malware_name $malware_name
+ deny logwrite = malware_name $malware_name
# ----- Routers -----
# Exim test configuration 4012
-# Content-scan: sock interface
+# Content-scan: f-protd interface
.include DIR/aux-var/std_conf_prefix
primary_hostname = myhost.test.ex
-av_scanner = sock : 127.0.0.1 PORT_S : : BAD : NAME:: (\w+)
+av_scanner = f-protd : localhost4 PORT_S
# ----- Main settings -----
-# Exim test configuration 4002
-# Content-scan: sophie interface
+# Exim test configuration 4013
+# Content-scan: f-prot6d interface
.include DIR/aux-var/std_conf_prefix
-log_selector = +subject
primary_hostname = myhost.test.ex
-av_scanner = sophie : DIR/eximdir/sophie_sock
+av_scanner = f-prot6d : localhost4 PORT_S
# ----- Main settings -----
c_data:
accept !malware = * OPT
- deny logwrite = malware_name $malware_name
+ deny logwrite = $callout_address malware_name $malware_name
# ----- Routers -----
-# Exim test configuration 4005
-# Content-scan: clamav interface
-
-OPT=
-CONTROL=
+# Exim test configuration 4014
+# Content-scan: sock interface
.include DIR/aux-var/std_conf_prefix
-log_selector = +subject
primary_hostname = myhost.test.ex
-#XXX we need an additional test for tcp-connected clamd
-av_scanner = clamd : DIR/eximdir/clam_sock CONTROL
+av_scanner = sock : 127.0.0.1 PORT_S : : BAD : NAME:: (\w+)
# ----- Main settings -----
c_data:
accept !malware = * OPT
- deny logwrite = malware_name $malware_name
+ deny logwrite = $callout_address malware_name $malware_name
# ----- Routers -----
-4009
\ No newline at end of file
+4002
\ No newline at end of file
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 [127.0.0.1]:1111 malware_name wibble
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
+1999-03-02 09:44:33 10HmaX-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
+1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaY-0005vi-00 (= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
+1999-03-02 09:44:33 10HmaY-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbD-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
-1999-03-02 09:44:33 10HmbD-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml (Responded: 5xx defer).
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmbB-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmbB-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite timeout"
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
+1999-03-02 09:44:33 10HmaX-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmaX-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml (Responded: 5xx defer).
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="accept this, overriding the scan daemon temp-error"
+1999-03-02 09:44:33 10HmbA-0005vi-00 spam acl condition: spamd: failed to connect to any address for ip4.ip4.ip4.ip4: Connection refused
+1999-03-02 09:44:33 10HmbA-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbC-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmbC-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
-1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: fsecure TESTSUITE/eximdir/fsec_sock : unable to read answer 0 (Connection timed out)
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: fsecure TESTSUITE/eximdir/fsec_sock : unable to read answer 0 (Connection timed out)
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite timeout"
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER Warning: reject Action: reject\n Symbol: FAKE_SYMBOL_A(15.00)\n Symbol: FAKE_SYMBOL_B(0.00)\n Message-ID: undef
+1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmaX-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+++ /dev/null
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
-1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : scanner reported error
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : unable to read from UNIX socket (TESTSUITE/eximdir/sophie_sock)
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : unable to read from UNIX socket (TESTSUITE/eximdir/sophie_sock)
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted destpite timeout"
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+++ /dev/null
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
-1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : ClamAV returned: scanned_file_name: 666 ERROR
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="accept this one despite timeout"
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbC-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted after a retry"
-1999-03-02 09:44:33 10HmbC-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : invalid response from scanner: 'blah [E]'
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : ClamAV returned: scanned_file_name: 666 ERROR
1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite timeout"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="accept this one despite timeout"
1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbC-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted after a retry"
+1999-03-02 09:44:33 10HmbC-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
-1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware_name VNAME
-1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4007.script -o pause3 TESTSUITE/spool/scan/10HmaX-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
+1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : invalid response from scanner: 'blah [E]'
1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4007.script -o pause3 TESTSUITE/spool/scan/10HmaY-0005vi-00 2>&1): Connection timed out
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite a timeout"
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite timeout"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER Warning: reject Action: reject\n Symbol: FAKE_SYMBOL_A(15.00)\n Symbol: FAKE_SYMBOL_B(0.00)\n Message-ID: undef
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaX-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
+1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4008.script -o pause3 TESTSUITE/spool/scan/10HmaX-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4008.script -o pause3 TESTSUITE/spool/scan/10HmaY-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite a timeout"
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaX-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
+1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : scanner reported error
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : unable to read from UNIX socket (TESTSUITE/eximdir/sophie_sock)
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : unable to read from UNIX socket (TESTSUITE/eximdir/sophie_sock)
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted destpite timeout"
1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 spam acl condition: spamd: failed to connect to any address for ip4.ip4.ip4.ip4: Connection refused
-1999-03-02 09:44:33 10HmbA-0005vi-00 U=fromuser Warning: [127.0.0.1]:1111 no action Spam detection software, running on the system "demo",\n has NOT identified this incoming email as spam. The original\n message has been attached to this so you can view it or label\n similar future email. If you have any questions, see\n @@CONTACT_ADDRESS@@ for details.\n \n Content preview: test [...]\n \n Content analysis details: (4.5 points, 5.0 required)\n \n pts rule name description\n ---- ---------------------- --------------------------------------------------\n -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP\n 1.2 MISSING_HEADERS Missing To: header\n 1.0 MISSING_FROM Missing From: header\n 1.8 MISSING_SUBJECT Missing Subject: header\n 1.4 MISSING_DATE Missing Date: header\n 0.1 MISSING_MID Missing Message-Id: header
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= fromuser@myhost.test.ex U=fromuser P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 (= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
+1999-03-02 09:44:33 10HmbB-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: fsecure TESTSUITE/eximdir/fsec_sock : unable to read answer 0 (Connection timed out)
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: fsecure TESTSUITE/eximdir/fsec_sock : unable to read answer 0 (Connection timed out)
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite timeout"
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmbD-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted"
+1999-03-02 09:44:33 10HmbD-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml (Responded: 5xx defer).
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmbB-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmbB-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="message should be accepted despite timeout"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml (Responded: 5xx defer).
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss T="accept this, overriding the scan daemon temp-error"
1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 [127.0.0.1]:1111 malware_name EICAR_Test_File
-1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbC-0005vi-00 malware_name VNAME
+1999-03-02 09:44:33 10HmbC-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
1999-03-02 09:44:33 10HmaX-0005vi-00 [127.0.0.1]:1111 malware_name wibble
1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
--- /dev/null
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 [127.0.0.1]:1111 malware_name EICAR_Test_File
+1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
--- /dev/null
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=r
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaX-0005vi-00 [127.0.0.1]:1111 malware_name wibble
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+++ /dev/null
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaY-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=abcde
-1999-03-02 09:44:33 10HmbA-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
-1999-03-02 09:44:33 10HmbB-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbC-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=20041217133501.GA3058@test.ex
-1999-03-02 09:44:33 10HmbC-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbD-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss
-1999-03-02 09:44:33 10HmbD-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbE-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss id=20041217133501.GA3058@test.ex
-1999-03-02 09:44:33 10HmbE-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbF-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss id=41C2F849.3060203@projectile.test.ex
-1999-03-02 09:44:33 10HmbF-0005vi-00 => userx <userx@test.ex> R=r1 T=t1
-1999-03-02 09:44:33 10HmbF-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA: Found Eicar-Test-Signature
+++ /dev/null
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaX-0005vi-00 => userx@test.ex R=client T=my_smtp H=127.0.0.1 [127.0.0.1] X=TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256 CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmaY-0005vi-00"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-
-******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtps X=TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256 CV=yes DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" S=sss id=E10HmaX-0005vi-00@myhost.test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=server
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+++ /dev/null
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
-1999-03-02 09:44:33 10HmaX-0005vi-00 [127.0.0.1] SSL verify error: depth=0 error=self signed certificate cert=/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock
-1999-03-02 09:44:33 10HmaX-0005vi-00 [127.0.0.1] SSL verify error: certificate name mismatch: "/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock"
-1999-03-02 09:44:33 10HmaX-0005vi-00 => userx@test.ex R=client T=my_smtp H=127.0.0.1 [127.0.0.1] X=TLSv1:AES256-SHA:256 CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmaY-0005vi-00"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-
-******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtps X=TLSv1:AES256-SHA:256 CV=yes DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" S=sss id=E10HmaX-0005vi-00@myhost.test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <userx@test.ex> R=server
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+++ /dev/null
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmaY-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
-From: CALLER_NAME <CALLER@myhost.test.ex>
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-X-Router-SSint: was preserved
-
-A message without any headers.
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmaZ-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-From: Test person <tp@cam.ac.uk>
-To: Me <userx@test.ex>
-Subject: A real test message
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-Message-ID: <41C2F849.3060203@projectile.test.ex>
-Sender: CALLER_NAME <CALLER@myhost.test.ex>
-X-Router-SSint: was preserved
-
-OK, this should look like a genuine message.
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbA-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-From: 99Junk99@somewhere.com
-To:
-Subject: MAKE MONEY FAST!!!!
-Message-id: abcde
-Sender: CALLER_NAME <CALLER@myhost.test.ex>
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-X-Router-SSint: was preserved
-
-This should be enough to trip the threshold.
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbB-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-From: Test person <tp@cam.ac.uk>
-To: Me <userx@test.ex>
-Subject: A real test message
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-Message-ID: <41C2F849.3060203@projectile.test.ex>
-FakeReject: test fakereject
-Sender: CALLER_NAME <CALLER@myhost.test.ex>
-X-Regex: Regex matched
-X-Router-SSint: was preserved
-
-OK, this should look like a genuine message, but
-it will trip on THIS REGEX.
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbC-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-From: J Caesar <jcaesar@test.ex>
-To: a-list00@exim.org
-Message-ID: <20041217133501.GA3058@test.ex>
-Mime-Version: 1.0
-Content-Type: multipart/mixed; boundary="T4sUOijqQbZv57TR"
-Content-Disposition: inline
-Subject: [exim] Re: Bug#286074: eximstats: uses message count as data for
- the "volume" charts
-X-BeenThere: a-list00@exim.org
-X-Mailman-Version: 2.1.5
-Precedence: list
-Sender: CALLER_NAME <CALLER@myhost.test.ex>
-X-0-content-type: multipart/mixed
-X-0-filename:
-X-0-charset:
-X-0-boundary: T4sUOijqQbZv57TR
-X-0-content-disposition: inline
-X-0-content-transfer-encoding:
-X-0-content-id:
-X-0-content-description:
-X-0-is-multipart: 1
-X-0-is-coverletter: 1
-X-0-is-rfc822: 0
-X-0-decode-filename: TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00-00000
-X-0-content-size: 2
-X-1-content-type: text/plain
-X-1-filename:
-X-1-charset: US-ASCII
-X-1-boundary:
-X-1-content-disposition: inline
-X-1-content-transfer-encoding: quoted-printable
-X-1-content-id:
-X-1-content-description:
-X-1-is-multipart: 0
-X-1-is-coverletter: 1
-X-1-is-rfc822: 0
-X-1-decode-filename: TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00-00001
-X-1-content-size: 1
-X-mime-regex: matched
-X-2-content-type: text/plain
-X-2-filename:
-X-2-charset: us-ascii
-X-2-boundary:
-X-2-content-disposition: inline
-X-2-content-transfer-encoding:
-X-2-content-id:
-X-2-content-description:
-X-2-is-multipart: 0
-X-2-is-coverletter: 0
-X-2-is-rfc822: 0
-X-2-decode-filename: TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00-00002
-X-2-content-size: 1
-X-3-content-type: text/plain
-X-3-filename: working-patch
-X-3-charset: us-ascii
-X-3-boundary:
-X-3-content-disposition: attachment
-X-3-content-transfer-encoding:
-X-3-content-id:
-X-3-content-description:
-X-3-is-multipart: 0
-X-3-is-coverletter: 0
-X-3-is-rfc822: 0
-X-3-decode-filename: TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00-00003
-X-3-content-size: 1
-X-4-content-type: text/plain
-X-4-filename:
-X-4-charset: us-ascii
-X-4-boundary:
-X-4-content-disposition: inline
-X-4-content-transfer-encoding: 7bit
-X-4-content-id:
-X-4-content-description:
-X-4-is-multipart: 0
-X-4-is-coverletter: 0
-X-4-is-rfc822: 0
-X-4-decode-filename: TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00-00004
-X-4-content-size: 1
-X-Router-SSint: was preserved
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset=US-ASCII
-Content-Transfer-Encoding: quoted-printable
-Content-Disposition: inline
-
-Test quoted-printable =3D
-Space at end of line=40
-Continued line =
-with this text.
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset=us-ascii
-Content-Disposition: inline
-
-There was a part of the patch missing, complete one is attached.
- sorry for wasting your time
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset=us-ascii
-Content-Disposition: attachment; filename=working-patch
-
---- /usr/sbin/eximstats 2004-12-17 13:36:44.381983753 +0100
-+++ eximstats 2004-12-17 13:47:37.763185260 +0100
-@@ -1107,11 +1107,11 @@
- if (scalar @chartdatanames < $ntopchart)
- {
- push(@chartdatanames, $key);
-- push(@chartdatavals, $$m_count{$key});
-+ push(@chartdatavals, $$m_data{$key});
- }
- else
- {
-- $chartotherval += $$m_count{$key};
-+ $chartotherval += $$m_data{$key};
- }
- }
- push(@chartdatanames, "Other");
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset="us-ascii"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Content-Disposition: inline
-
---
-
---T4sUOijqQbZv57TR--
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER by myhost.test.ex with local (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbD-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-Message-Id: <E10HmbD-0005vi-00@myhost.test.ex>
-From: CALLER_NAME <CALLER@myhost.test.ex>
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-X-Router-SSint: was preserved
-
-A message without any headers.
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER by myhost.test.ex with local (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbE-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-From: J Caesar <jcaesar@test.ex>
-To: a-list00@exim.org
-Message-ID: <20041217133501.GA3058@test.ex>
-Mime-Version: 1.0
-Content-Type: multipart/mixed; boundary="T4sUOijqQbZv57TR"
-Content-Disposition: inline
-Subject: [exim] Re: Bug#286074: eximstats: uses message count as data for
- the "volume" charts
-X-BeenThere: a-list00@exim.org
-X-Mailman-Version: 2.1.5
-Precedence: list
-Sender: CALLER_NAME <CALLER@myhost.test.ex>
-X-0-content-type: multipart/mixed
-X-0-filename:
-X-0-charset:
-X-0-boundary: T4sUOijqQbZv57TR
-X-0-content-disposition: inline
-X-0-content-transfer-encoding:
-X-0-content-id:
-X-0-content-description:
-X-0-is-multipart: 1
-X-0-is-coverletter: 1
-X-0-is-rfc822: 0
-X-0-decode-filename: TESTSUITE/spool/scan/10HmbE-0005vi-00/10HmbE-0005vi-00-00000
-X-0-content-size: 1
-X-1-content-type: text/plain
-X-1-filename:
-X-1-charset: us-ascii
-X-1-boundary:
-X-1-content-disposition: inline
-X-1-content-transfer-encoding:
-X-1-content-id:
-X-1-content-description:
-X-1-is-multipart: 0
-X-1-is-coverletter: 1
-X-1-is-rfc822: 0
-X-1-decode-filename: TESTSUITE/spool/scan/10HmbE-0005vi-00/10HmbE-0005vi-00-00001
-X-1-content-size: 1
-X-2-content-type: text/plain
-X-2-filename: working-patch
-X-2-charset: us-ascii
-X-2-boundary:
-X-2-content-disposition: attachment
-X-2-content-transfer-encoding:
-X-2-content-id:
-X-2-content-description:
-X-2-is-multipart: 0
-X-2-is-coverletter: 0
-X-2-is-rfc822: 0
-X-2-decode-filename: TESTSUITE/spool/scan/10HmbE-0005vi-00/10HmbE-0005vi-00-00002
-X-2-content-size: 1
-X-3-content-type: text/plain
-X-3-filename:
-X-3-charset: us-ascii
-X-3-boundary:
-X-3-content-disposition: inline
-X-3-content-transfer-encoding: 7bit
-X-3-content-id:
-X-3-content-description:
-X-3-is-multipart: 0
-X-3-is-coverletter: 0
-X-3-is-rfc822: 0
-X-3-decode-filename: TESTSUITE/spool/scan/10HmbE-0005vi-00/10HmbE-0005vi-00-00003
-X-3-content-size: 1
-X-Router-SSint: was preserved
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset=us-ascii
-Content-Disposition: inline
-
-There was a part of the patch missing, complete one is attached.
- sorry for wasting your time
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset=us-ascii
-Content-Disposition: attachment; filename=working-patch
-
---- /usr/sbin/eximstats 2004-12-17 13:36:44.381983753 +0100
-+++ eximstats 2004-12-17 13:47:37.763185260 +0100
-@@ -1107,11 +1107,11 @@
- if (scalar @chartdatanames < $ntopchart)
- {
- push(@chartdatanames, $key);
-- push(@chartdatavals, $$m_count{$key});
-+ push(@chartdatavals, $$m_data{$key});
- }
- else
- {
-- $chartotherval += $$m_count{$key};
-+ $chartotherval += $$m_data{$key};
- }
- }
- push(@chartdatanames, "Other");
-
---T4sUOijqQbZv57TR
-Content-Type: text/plain; charset="us-ascii"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Content-Disposition: inline
-
---
-
---T4sUOijqQbZv57TR--
-
-From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
-Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbF-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-From: Test person <tp@cam.ac.uk>
-To: Me <userx@test.ex>
-Subject: A real test message
-Date: Tue, 2 Mar 1999 09:44:33 +0000
-Message-ID: <41C2F849.3060203@projectile.test.ex>
-FakeDefer: test fakedefer
-Sender: CALLER_NAME <CALLER@myhost.test.ex>
-X-Regex: Regex matched
-X-Router-SSint: was preserved
-
-OK, this should look like a genuine message, but
-it will trip on THIS REGEX.
-
+++ /dev/null
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml (Responded: 5xx defer).
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
-1999-03-02 09:44:33 10HmbA-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml (Responded: 5xx defer).
+++ /dev/null
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : ClamAV returned: scanned_file_name: 666 ERROR
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : invalid response from scanner: 'blah [E]'
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : ClamAV returned: scanned_file_name: 666 ERROR
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4007.script -o pause3 TESTSUITE/spool/scan/10HmaX-0005vi-00 2>&1): Connection timed out
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4007.script -o pause3 TESTSUITE/spool/scan/10HmaY-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : invalid response from scanner: 'blah [E]'
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4008.script -o pause3 TESTSUITE/spool/scan/10HmaX-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4008.script -o pause3 TESTSUITE/spool/scan/10HmaY-0005vi-00 2>&1): Connection timed out
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml (Responded: 5xx defer).
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
+1999-03-02 09:44:33 10HmbA-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml (Responded: 5xx defer).
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+++ /dev/null
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-Envelope-from: <CALLER@myhost.test.ex>
-Envelope-to: <userx@test.ex>
-P Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmaX-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
- Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: defer this one (daemon tmp-err)
-I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
-F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmbB-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-Envelope-from: <CALLER@myhost.test.ex>
-Envelope-to: <userx@test.ex>
-P Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbB-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
- Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: message should be rejected (virus found)
-I Message-Id: <E10HmbB-0005vi-00@myhost.test.ex>
-F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-Envelope-from: <CALLER@myhost.test.ex>
-Envelope-to: <userx@test.ex>
-P Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmaY-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
- Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: message should be deferred due to timeout
-I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
-F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmbC-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
-Envelope-from: <CALLER@myhost.test.ex>
-Envelope-to: <userx@test.ex>
-P Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmbC-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
- Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: message should be rejected (virus found)
-I Message-Id: <E10HmbC-0005vi-00@myhost.test.ex>
-F From: CALLER_NAME <CALLER@myhost.test.ex>
id 10HmaX-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: defer this one, the scanner had an error
+ Subject: defer this one due to scanner error
I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
id 10HmaY-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: message should be tmp-rejected due to timeout
+ Subject: defer this one due to timeout
I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+Envelope-from: <CALLER@myhost.test.ex>
+Envelope-to: <userx@test.ex>
+P Received: from CALLER (helo=test.ex)
+ by myhost.test.ex with local-esmtp (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmaX-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+ Date: Tue, 2 Mar 1999 09:44:33 +0000
+ Subject: defer this one, the scanner had an error
+I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+F From: CALLER_NAME <CALLER@myhost.test.ex>
+1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaZ-0005vi-00
+ id 10HmbA-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
Subject: message should be rejected
-I Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
+I Message-Id: <E10HmbA-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaX-0005vi-00
+ id 10HmaY-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
Subject: message should be tmp-rejected due to timeout
-I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
-Envelope-from: <CALLER@myhost.test.ex>
-Envelope-to: <userx@test.ex>
-P Received: from CALLER (helo=test.ex)
- by myhost.test.ex with local-esmtp (Exim x.yz)
- (envelope-from <CALLER@myhost.test.ex>)
- id 10HmaX-0005vi-00
- for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
- Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: defer this one due to scanner error
-I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
-F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmbA-0005vi-00
+ id 10HmaZ-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
Subject: message should be rejected
-I Message-Id: <E10HmbA-0005vi-00@myhost.test.ex>
+I Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaY-0005vi-00
+ id 10HmaX-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: defer this one due to timeout
-I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
+ Subject: message should be tmp-rejected due to timeout
+I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaZ-0005vi-00
+ id 10HmaX-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
- Subject: message should be rejected
-I Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
+ Subject: defer this one (daemon tmp-err)
+I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmbB-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaX-0005vi-00
+ id 10HmbB-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+ Date: Tue, 2 Mar 1999 09:44:33 +0000
+ Subject: message should be rejected (virus found)
+I Message-Id: <E10HmbB-0005vi-00@myhost.test.ex>
+F From: CALLER_NAME <CALLER@myhost.test.ex>
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+Envelope-from: <CALLER@myhost.test.ex>
+Envelope-to: <userx@test.ex>
+P Received: from CALLER (helo=test.ex)
+ by myhost.test.ex with local-esmtp (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmaY-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
Subject: message should be deferred due to timeout
-I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
+F From: CALLER_NAME <CALLER@myhost.test.ex>
+1999-03-02 09:44:33 10HmbC-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+Envelope-from: <CALLER@myhost.test.ex>
+Envelope-to: <userx@test.ex>
+P Received: from CALLER (helo=test.ex)
+ by myhost.test.ex with local-esmtp (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbC-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+ Date: Tue, 2 Mar 1999 09:44:33 +0000
+ Subject: message should be rejected (virus found)
+I Message-Id: <E10HmbC-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
Subject: message should be rejected
I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
+1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+Envelope-from: <CALLER@myhost.test.ex>
+Envelope-to: <userx@test.ex>
+P Received: from CALLER (helo=test.ex)
+ by myhost.test.ex with local-esmtp (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmaY-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+ Date: Tue, 2 Mar 1999 09:44:33 +0000
+ Subject: message should be deferred due to timeout
+I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
+F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
+1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaX-0005vi-00
+ id 10HmaZ-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
Subject: message should be rejected
-I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+I Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
P Received: from CALLER (helo=test.ex)
by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
- id 10HmaY-0005vi-00
+ id 10HmaX-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Date: Tue, 2 Mar 1999 09:44:33 +0000
Subject: message should be deferred due to timeout
-I Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
+I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
-1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA: Found Eicar-Test-Signature
+1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<CALLER@myhost.test.ex> rejected after DATA
Envelope-from: <CALLER@myhost.test.ex>
Envelope-to: <userx@test.ex>
-P Received: from CALLER by myhost.test.ex with local-smtp (Exim x.yz)
+P Received: from CALLER (helo=test.ex)
+ by myhost.test.ex with local-esmtp (Exim x.yz)
(envelope-from <CALLER@myhost.test.ex>)
id 10HmaX-0005vi-00
for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
- Subject: a virus test
+ Date: Tue, 2 Mar 1999 09:44:33 +0000
+ Subject: message should be rejected
I Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
F From: CALLER_NAME <CALLER@myhost.test.ex>
- Date: Tue, 2 Mar 1999 09:44:33 +0000
/^Support for:/ ||
/^Routers:/ ||
/^Transports:/ ||
+ /^Malware:/ ||
/^log selectors =/ ||
/^cwd=/ ||
/^Fixed never_users:/ ||
}
}
}
+
+ elsif (/^Malware: (.*)/)
+ {
+ print;
+ @temp = split /(\s+)/, $1;
+ push(@temp, ' ');
+ %parm_malware = @temp;
+ }
+
}
close(EXIMINFO);
print "-" x 78, "\n";
{
if (!defined $parm_transports{$1}) { $wantthis = 0; last; }
}
+ elsif (/^malware (.*)$/)
+ {
+ if (!defined $parm_malware{$1}) { $wantthis = 0; last; }
+ }
else
{
tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");
-# content scan interface: f-protd
-need_ipv4
-munge loopback
-#
-server PORT_S
-<GET
-<
-><summary code="11">
->*eof
-****
-#
-#
-#
-exim -odi -bs -DOPT=
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be accepted
-
-.
-quit
-****
-#
-#
-#
-server PORT_S
-<GET
-<
->
->
->
-><detected type="foo">
-><name>wibble</name>
-><summary code="11">
->*eof
-****
-#
-#
-#
-exim -odi -bs -DOPT=
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be rejected
-
-due to the server response (above)
-.
-quit
-****
-#
-#
-#
-server PORT_S
-<GET
-*sleep 3
-****
-#
+# ACL regex= test
#
+# These tests are copies from testcase 4000;
+# they should be removed from there but I don't
+# run spamassassin so can't verify the change.
#
-exim -odi -bs -DOPT="/tmo=2s"
+exim -odi -bs
ehlo test.ex
mail from:<>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be deferred due to timeout
+From: Test person <tp@cam.ac.uk>
+To: Me <userx@test.ex>
+Subject: A real test message
+Date: Fri, 17 Dec 2004 16:13:04 +0100
+Message-ID: <41C2F849.3060203@projectile.test.ex>
+OK, this should look like a genuine message.
.
quit
****
-#
-#
-#
-server PORT_S
-<GET
-*sleep 3
-****
-#
-#
-#
-exim -odi -bs -DOPT="/tmo=2s/defer_ok"
+exim -odi -bs
ehlo test.ex
mail from:<>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be accepted despite timeout
+From: Test person <tp@cam.ac.uk>
+To: Me <userx@test.ex>
+Subject: A real test message
+Date: Fri, 17 Dec 2004 16:13:04 +0100
+Message-ID: <41C2F849.3060203@projectile.test.ex>
+FakeReject: test fakereject
+OK, this should look like a genuine message, but
+it will trip on THIS gazornenplaz REGEX.
.
quit
****
-# content scan interface: aveserver
-#
-server DIR/eximdir/aveserver_sock
->200 ready
-<SCAN
->200 done
-<quit
->200 ready
+# content scan interface: spamassassin
+#
+# The spooled file for scanning includes the test-runner's user name
+# hence size varies. Munge that.
+munge scanfile_size
+#
+#
+# A good-comms test, returning not-spam.
+# (we could use a second one that returns is-spam...)
+server 7833
+<REPORT SPAMC
+<User:
+<Content-length:
+<
+<From
+<X-Envelope-From
+<X-Envelope-To
+<Received:
+< by
+< (envelope
+< id
+< for
+<Content-type: text/plain
+<Message-Id:
+<From:
+<Date:
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
*eof
****
-#
-#
-#
-exim -odi -bs -DOPT=
+exim -odi -oMt fromuser -bs
ehlo test.ex
-mail from:<>
+mail from:<fromuser@myhost.test.ex>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be accepted
+Content-type: text/plain
+test
.
quit
****
#
#
#
-server DIR/eximdir/aveserver_sock
->2xx ready
-<SCAN
->5xx defer
-<quit
->2xx ready
-*eof
-****
-#
-#
-#
-exim -odi -bs -DOPT=
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: defer this one (daemon tmp-err)
-
-.
-quit
-****
-#
-#
#
-server DIR/eximdir/aveserver_sock
->2xx ready
-<SCAN
->322 VNAME found
->2xx ready
-<quit
->2xx ready
+# Server spec line with timeout option, not exercised
+# (could we cut down the massive content?)
+server 7833
+<REPORT SPAMC
+<User:
+<Content-length:
+<
+<From
+<X-Envelope-From
+<X-Envelope-To
+<Received:
+< by
+< (envelope
+< id
+< for
+<Content-type: text/plain
+<Message-Id:
+<From:
+<Date:
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
*eof
****
-#
-#
-#
-exim -odi -bs -DOPT=
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be rejected (virus found)
-
-.
-quit
-****
-#
-#
-#
-server DIR/eximdir/aveserver_sock
-*sleep 3
-****
-#
-#
-#
-exim -odi -bs -DOPT="/tmo=2s"
+exim -odi -oMt fromuser -bs -DOPT='127.0.0.1 7833 retry=10s'
ehlo test.ex
-mail from:<>
+mail from:<fromuser@myhost.test.ex>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be deferred due to timeout
+Content-type: text/plain
+test
.
quit
****
#
#
#
-server DIR/eximdir/aveserver_sock
-*sleep 3
+# Server spec line with timeout option, exercised
+server -i 2 7833
+<REPORT SPAMC
+<User:
+<Content-length:
+<
+<From
+<X-Envelope-From
+<X-Envelope-To
+<Received:
+< by
+< (envelope
+< id
+< for
+<Content-type: text/plain
+<Message-Id:
+<From:
+<Date:
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
+*eof
****
-#
-#
-#
-exim -odi -bs -DOPT="/tmo=2s / defer_ok"
+exim -odi -oMt fromuser -bs -DOPT='127.0.0.1 7833 retry=4s'
ehlo test.ex
-mail from:<>
+mail from:<fromuser@myhost.test.ex>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be accepted despite timeout
+Content-type: text/plain
+test
.
quit
****
#
#
#
-server DIR/eximdir/aveserver_sock
->2xx ready
-<SCAN
->5xx defer
-<quit
->2xx ready
+# Multiple servers, prioritised, with timeout spec; first one fails
+# List separator changed
+server 7833
+<REPORT SPAMC
+<User:
+<Content-length:
+<
+<From
+<X-Envelope-From
+<X-Envelope-To
+<Received:
+< by
+< (envelope
+< id
+< for
+<Content-type: text/plain
+<Message-Id:
+<From:
+<Date:
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
*eof
****
-#
-#
-#
-exim -odi -bs -DOPT=" / defer_ok"
+exim -odi -oMt fromuser -bs -DOPT='<; 127.0.0.1 7833 ; HOSTIPV4 7834 pri=2 tmo=2s'
ehlo test.ex
-mail from:<>
+mail from:<fromuser@myhost.test.ex>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: accept this, overriding the scan daemon temp-error
+Content-type: text/plain
+test
.
quit
****
#
#
-#
-# Recheck that defer_ok option does not affect a malware detection
-#
-server DIR/eximdir/aveserver_sock
->2xx ready
-<SCAN
->322 VNAME found
->2xx ready
-<quit
->2xx ready
-*eof
-****
-#
-#
-#
-exim -odi -bs -DOPT="/defer_ok"
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be rejected (virus found)
-
-.
-quit
-****
-# content scan interface: fsecure
-# also testing alternate list separator for malware= args
-#
-server DIR/eximdir/fsec_sock
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<SCAN
->LF>random ignored line
->LF>random ignored line 2
->LF>OK Scan ok.
-*eof
-****
-#
-#
-#
-exim -odi -bs -DOPT=
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be accepted
-
-.
-quit
-****
-#
-#
-#
-server DIR/eximdir/fsec_sock
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<SCAN
->LF>xxxINFECTED blah VNAME blah
->LF>OK Scan ok.
-*eof
-****
-#
-#
-#
-exim -odi -bs -DOPT=
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be rejected
-
-.
-quit
-****
-#
-#
-#
-server DIR/eximdir/fsec_sock
-*sleep 3
-****
-#
-#
-#
-exim -odi -bs -DOPT=";tmo=2s"
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be tmp-rejected due to timeout
-
-.
-quit
-****
-#
-#
-#
-server DIR/eximdir/fsec_sock
-*sleep 3
-****
-#
-#
-#
-exim -odi -bs -DOPT=";defer_ok;tmo=2s"
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be accepted despite timeout
-
-.
-quit
-****
-#
-#
-#
-server DIR/eximdir/fsec_sock
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<CONFIGURE
->ignored_response
-<SCAN
->LF>xxxINFECTED blah VNAME blah
->LF>OK Scan ok.
+# content scan interface: rspamd
+#
+# The spooled file for scanning includes the test-runner's user name
+# hence size varies. Munge that.
+munge scanfile_size
+#
+server 11333
+<CHECK RSPAMC/1.3
+<Content-length:
+<Queue-Id:
+<From:
+<Recipient-Number: 1
+<Rcpt:
+<Helo:
+<User:
+<
+<From
+<X-Envelope-From
+<X-Envelope-To
+<Received:
+< by
+< (envelope
+< id
+< for
+<From:
+<Content-type: text/plain
+<Message-Id:
+<Sender:
+<Date:
+<
+<test
+>RSPAMD/1.3 0 EX_OK
+>Metric: default; True; 15.00 / 15.00 / 0.0
+>Action: reject
+>Symbol: FAKE_SYMBOL_A(15.00)
+>Symbol: FAKE_SYMBOL_B(0.00)
+>Message-ID: undef
*eof
****
-#
-#
-#
-exim -odi -bs -DOPT="; defer_ok ; tmo=5h"
+exim -odi -bs
ehlo test.ex
mail from:<>
rcpt to:<userx@test.ex>
data
-Date: Fri, 17 Dec 2004 14:35:01 +0100
-Subject: message should be rejected as the options are not relevant
+From: MAILER_DAEMON <>
+Content-type: text/plain
+test
.
quit
****
+++ /dev/null
-# content scan interface: rspamd
-#
-# The spooled file for scanning includes the test-runner's user name
-# hence size varies. Munge that.
-munge scanfile_size
-#
-server 11333
-<CHECK RSPAMC/1.3
-<Content-length:
-<Queue-Id:
-<From:
-<Recipient-Number: 1
-<Rcpt:
-<Helo:
-<User:
-<
-<From
-<X-Envelope-From
-<X-Envelope-To
-<Received:
-< by
-< (envelope
-< id
-< for
-<From:
-<Content-type: text/plain
-<Message-Id:
-<Sender:
-<Date:
-<
-<test
->RSPAMD/1.3 0 EX_OK
->Metric: default; True; 15.00 / 15.00 / 0.0
->Action: reject
->Symbol: FAKE_SYMBOL_A(15.00)
->Symbol: FAKE_SYMBOL_B(0.00)
->Message-ID: undef
-*eof
-****
-exim -odi -bs
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-From: MAILER_DAEMON <>
-Content-type: text/plain
-
-test
-.
-quit
-****
+++ /dev/null
-# content scan interface: spamassassin
-#
-# The spooled file for scanning includes the test-runner's user name
-# hence size varies. Munge that.
-munge scanfile_size
-#
-#
-# A good-comms test, returning not-spam.
-# (we could use a second one that returns is-spam...)
-server 7833
-<REPORT SPAMC
-<User:
-<Content-length:
-<
-<From
-<X-Envelope-From
-<X-Envelope-To
-<Received:
-< by
-< (envelope
-< id
-< for
-<Content-type: text/plain
-<Message-Id:
-<From:
-<Date:
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
-*eof
-****
-exim -odi -oMt fromuser -bs
-ehlo test.ex
-mail from:<fromuser@myhost.test.ex>
-rcpt to:<userx@test.ex>
-data
-Content-type: text/plain
-
-test
-.
-quit
-****
-#
-#
-#
-#
-# Server spec line with timeout option, not exercised
-# (could we cut down the massive content?)
-server 7833
-<REPORT SPAMC
-<User:
-<Content-length:
-<
-<From
-<X-Envelope-From
-<X-Envelope-To
-<Received:
-< by
-< (envelope
-< id
-< for
-<Content-type: text/plain
-<Message-Id:
-<From:
-<Date:
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
-*eof
-****
-exim -odi -oMt fromuser -bs -DOPT='127.0.0.1 7833 retry=10s'
-ehlo test.ex
-mail from:<fromuser@myhost.test.ex>
-rcpt to:<userx@test.ex>
-data
-Content-type: text/plain
-
-test
-.
-quit
-****
-#
-#
-#
-# Server spec line with timeout option, exercised
-server -i 2 7833
-<REPORT SPAMC
-<User:
-<Content-length:
-<
-<From
-<X-Envelope-From
-<X-Envelope-To
-<Received:
-< by
-< (envelope
-< id
-< for
-<Content-type: text/plain
-<Message-Id:
-<From:
-<Date:
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
-*eof
-****
-exim -odi -oMt fromuser -bs -DOPT='127.0.0.1 7833 retry=4s'
-ehlo test.ex
-mail from:<fromuser@myhost.test.ex>
-rcpt to:<userx@test.ex>
-data
-Content-type: text/plain
-
-test
-.
-quit
-****
-#
-#
-#
-# Multiple servers, prioritised, with timeout spec; first one fails
-# List separator changed
-server 7833
-<REPORT SPAMC
-<User:
-<Content-length:
-<
-<From
-<X-Envelope-From
-<X-Envelope-To
-<Received:
-< by
-< (envelope
-< id
-< for
-<Content-type: text/plain
-<Message-Id:
-<From:
-<Date:
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
-*eof
-****
-exim -odi -oMt fromuser -bs -DOPT='<; 127.0.0.1 7833 ; HOSTIPV4 7834 pri=2 tmo=2s'
-ehlo test.ex
-mail from:<fromuser@myhost.test.ex>
-rcpt to:<userx@test.ex>
-data
-Content-type: text/plain
-
-test
-.
-quit
-****
-#
-#
+++ /dev/null
-# ACL regex= test
-#
-# These tests are copies from testcase 4000;
-# they should be removed from there but I don't
-# run spamassassin so can't verify the change.
-#
-exim -odi -bs
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-From: Test person <tp@cam.ac.uk>
-To: Me <userx@test.ex>
-Subject: A real test message
-Date: Fri, 17 Dec 2004 16:13:04 +0100
-Message-ID: <41C2F849.3060203@projectile.test.ex>
-
-OK, this should look like a genuine message.
-.
-quit
-****
-exim -odi -bs
-ehlo test.ex
-mail from:<>
-rcpt to:<userx@test.ex>
-data
-From: Test person <tp@cam.ac.uk>
-To: Me <userx@test.ex>
-Subject: A real test message
-Date: Fri, 17 Dec 2004 16:13:04 +0100
-Message-ID: <41C2F849.3060203@projectile.test.ex>
-FakeReject: test fakereject
-
-OK, this should look like a genuine message, but
-it will trip on THIS gazornenplaz REGEX.
-.
-quit
-****
--- /dev/null
+support Content_Scanning
+malware clamd
--- /dev/null
+support Content_Scanning
+malware avast
--- /dev/null
+support Content_Scanning
+malware cmdline
--- /dev/null
+support Content_Scanning
+malware sophie
--- /dev/null
+# content scan interface: fsecure
+# also testing alternate list separator for malware= args
+#
+server DIR/eximdir/fsec_sock
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<SCAN
+>LF>random ignored line
+>LF>random ignored line 2
+>LF>OK Scan ok.
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be accepted
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/fsec_sock
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<SCAN
+>LF>xxxINFECTED blah VNAME blah
+>LF>OK Scan ok.
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be rejected
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/fsec_sock
+*sleep 3
+****
+#
+#
+#
+exim -odi -bs -DOPT=";tmo=2s"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be tmp-rejected due to timeout
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/fsec_sock
+*sleep 3
+****
+#
+#
+#
+exim -odi -bs -DOPT=";defer_ok;tmo=2s"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be accepted despite timeout
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/fsec_sock
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<CONFIGURE
+>ignored_response
+<SCAN
+>LF>xxxINFECTED blah VNAME blah
+>LF>OK Scan ok.
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT="; defer_ok ; tmo=5h"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be rejected as the options are not relevant
+
+.
+quit
+****
--- /dev/null
+support Content_Scanning
+malware fsecure
--- /dev/null
+# content scan interface: aveserver
+#
+server DIR/eximdir/aveserver_sock
+>200 ready
+<SCAN
+>200 done
+<quit
+>200 ready
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be accepted
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/aveserver_sock
+>2xx ready
+<SCAN
+>5xx defer
+<quit
+>2xx ready
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: defer this one (daemon tmp-err)
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/aveserver_sock
+>2xx ready
+<SCAN
+>322 VNAME found
+>2xx ready
+<quit
+>2xx ready
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be rejected (virus found)
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/aveserver_sock
+*sleep 3
+****
+#
+#
+#
+exim -odi -bs -DOPT="/tmo=2s"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be deferred due to timeout
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/aveserver_sock
+*sleep 3
+****
+#
+#
+#
+exim -odi -bs -DOPT="/tmo=2s / defer_ok"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be accepted despite timeout
+
+.
+quit
+****
+#
+#
+#
+server DIR/eximdir/aveserver_sock
+>2xx ready
+<SCAN
+>5xx defer
+<quit
+>2xx ready
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=" / defer_ok"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: accept this, overriding the scan daemon temp-error
+
+.
+quit
+****
+#
+#
+#
+# Recheck that defer_ok option does not affect a malware detection
+#
+server DIR/eximdir/aveserver_sock
+>2xx ready
+<SCAN
+>322 VNAME found
+>2xx ready
+<quit
+>2xx ready
+*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT="/defer_ok"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be rejected (virus found)
+
+.
+quit
+****
--- /dev/null
+support Content_Scanning
+malware aveserver
--- /dev/null
+# content scan interface: f-protd
+need_ipv4
+munge loopback
+#
+server PORT_S
+<GET
+<
+><summary code="11">
+>*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be accepted
+
+.
+quit
+****
+#
+#
+#
+server PORT_S
+<GET
+<
+>
+>
+>
+><detected type="foo">
+><name>wibble</name>
+><summary code="11">
+>*eof
+****
+#
+#
+#
+exim -odi -bs -DOPT=
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be rejected
+
+due to the server response (above)
+.
+quit
+****
+#
+#
+#
+server PORT_S
+<GET
+*sleep 3
+****
+#
+#
+#
+exim -odi -bs -DOPT="/tmo=2s"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be deferred due to timeout
+
+.
+quit
+****
+#
+#
+#
+server PORT_S
+<GET
+*sleep 3
+****
+#
+#
+#
+exim -odi -bs -DOPT="/tmo=2s/defer_ok"
+ehlo test.ex
+mail from:<>
+rcpt to:<userx@test.ex>
+data
+Date: Fri, 17 Dec 2004 14:35:01 +0100
+Subject: message should be accepted despite timeout
+
+.
+quit
+****
--- /dev/null
+support Content_Scanning
+malware f-protd
--- /dev/null
+support Content_Scanning
+malware f-prot6d
--- /dev/null
+support Content_Scanning
+malware sock
+++ /dev/null
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml (Responded: 5xx defer).
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
-1999-03-02 09:44:33 10HmbA-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml (Responded: 5xx defer).
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : invalid response from scanner: 'blah [E]'
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
-1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : ClamAV returned: scanned_file_name: 666 ERROR
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: clamd TESTSUITE/eximdir/clam_sock : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4007.script -o pause3 TESTSUITE/spool/scan/10HmaX-0005vi-00 2>&1): Connection timed out
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4007.script -o pause3 TESTSUITE/spool/scan/10HmaY-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : invalid response from scanner: 'blah [E]'
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: avast TESTSUITE/eximdir/avast_sock : timeout from scanner
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4008.script -o pause3 TESTSUITE/spool/scan/10HmaX-0005vi-00 2>&1): Connection timed out
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: cmdline : unable to read from scanner (TESTSUITE/aux-fixed/4008.script -o pause3 TESTSUITE/spool/scan/10HmaY-0005vi-00 2>&1): Connection timed out
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : scanner reported error
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : unable to read from UNIX socket (TESTSUITE/eximdir/sophie_sock)
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: sophie TESTSUITE/eximdir/sophie_sock : unable to read from UNIX socket (TESTSUITE/eximdir/sophie_sock)
-1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
-1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml (Responded: 5xx defer).
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
+1999-03-02 09:44:33 10HmaZ-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unavailable (Responded: nothing).
+1999-03-02 09:44:33 10HmbA-0005vi-00 malware acl condition: aveserver TESTSUITE/eximdir/aveserver_sock : unable to scan file TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml (Responded: 5xx defer).
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
+1999-03-02 09:44:33 10HmaY-0005vi-00 malware acl condition: f-prot6d [127.0.0.1]:1111 : unable to read from socket (Connection timed out)
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaZ-0005vi-00\r
+250 OK id=10HmaX-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250-myhost.test.ex Hello CALLER at test.ex\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-550 Administrative prohibition\r
+550-Your message has been rejected but is being kept for evaluation.\r
+550-If it was a legitimate message, it may still be delivered to the target\r
+550 recipient(s).\r
221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbA-0005vi-00\r
-221 myhost.test.ex closing connection\r
-
-******** SERVER ********
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<GET TESTSUITE/spool/scan/10HmaZ-0005vi-00/10HmaZ-0005vi-00.eml HTTP/1.0
-<
-><summary code="11">
->*eof
-End of script
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<GET TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml HTTP/1.0
-<
->
->
->
-><detected type="foo">
-><name>wibble</name>
-><summary code="11">
->*eof
-End of script
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<GET TESTSUITE/spool/scan/10HmaY-0005vi-00/10HmaY-0005vi-00.eml HTTP/1.0
-*sleep 3
-End of script
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<GET TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml HTTP/1.0
-*sleep 3
-End of script
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
+250-myhost.test.ex Hello fromuser at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbD-0005vi-00\r
+250 OK id=10HmaX-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
+250-myhost.test.ex Hello fromuser at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
+250 OK id=10HmaY-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550 Administrative prohibition\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
+250-myhost.test.ex Hello fromuser at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK id=10HmaZ-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
+250-myhost.test.ex Hello fromuser at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
354 Enter message, ending with "." on a line by itself\r
250 OK id=10HmbA-0005vi-00\r
221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550 Administrative prohibition\r
-221 myhost.test.ex closing connection\r
******** SERVER ********
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
->200 ready
-<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbD-0005vi-00/10HmbD-0005vi-00.eml
->200 done
-<quit
->200 ready
+Listening on port 7833 ...
+Connection request from [127.0.0.1]
+<REPORT SPAMC/1.2
+<User: nobody
+<Content-length: ddd
+<
+<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
+<X-Envelope-From: <fromuser@myhost.test.ex>
+<X-Envelope-To: userx@test.ex
+<Received: from fromuser (helo=test.ex)
+< by myhost.test.ex with local-esmtp (Exim x.yz)
+< (envelope-from <fromuser@myhost.test.ex>)
+< id 10HmaX-0005vi-00
+< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+<Content-type: text/plain
+<Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+<From: fromuser@myhost.test.ex
+<Date: Tue, 2 Mar 1999 09:44:33 +0000
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
Expected EOF read from client
End of script
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
->2xx ready
-<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
->5xx defer
-<quit
->2xx ready
+Listening on port 7833 ...
+Connection request from [127.0.0.1]
+<REPORT SPAMC/1.2
+<User: nobody
+<Content-length: ddd
+<
+<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
+<X-Envelope-From: <fromuser@myhost.test.ex>
+<X-Envelope-To: userx@test.ex
+<Received: from fromuser (helo=test.ex)
+< by myhost.test.ex with local-esmtp (Exim x.yz)
+< (envelope-from <fromuser@myhost.test.ex>)
+< id 10HmaY-0005vi-00
+< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+<Content-type: text/plain
+<Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
+<From: fromuser@myhost.test.ex
+<Date: Tue, 2 Mar 1999 09:44:33 +0000
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
Expected EOF read from client
End of script
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
->2xx ready
-<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
->322 VNAME found
->2xx ready
-<quit
->2xx ready
-Expected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
-*sleep 3
-End of script
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
-*sleep 3
-End of script
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
->2xx ready
-<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
->5xx defer
-<quit
->2xx ready
+Inital pause of 2 seconds
+Listening on port 7833 ...
+Connection request from [127.0.0.1]
+<REPORT SPAMC/1.2
+<User: nobody
+<Content-length: ddd
+<
+<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
+<X-Envelope-From: <fromuser@myhost.test.ex>
+<X-Envelope-To: userx@test.ex
+<Received: from fromuser (helo=test.ex)
+< by myhost.test.ex with local-esmtp (Exim x.yz)
+< (envelope-from <fromuser@myhost.test.ex>)
+< id 10HmaZ-0005vi-00
+< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+<Content-type: text/plain
+<Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
+<From: fromuser@myhost.test.ex
+<Date: Tue, 2 Mar 1999 09:44:33 +0000
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
Expected EOF read from client
End of script
-Listening on TESTSUITE/eximdir/aveserver_sock ...
-Connection request
->2xx ready
-<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00.eml
->322 VNAME found
->2xx ready
-<quit
->2xx ready
+Listening on port 7833 ...
+Connection request from [127.0.0.1]
+<REPORT SPAMC/1.2
+<User: nobody
+<Content-length: ddd
+<
+<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
+<X-Envelope-From: <fromuser@myhost.test.ex>
+<X-Envelope-To: userx@test.ex
+<Received: from fromuser (helo=test.ex)
+< by myhost.test.ex with local-esmtp (Exim x.yz)
+< (envelope-from <fromuser@myhost.test.ex>)
+< id 10HmbA-0005vi-00
+< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+<Content-type: text/plain
+<Message-Id: <E10HmbA-0005vi-00@myhost.test.ex>
+<From: fromuser@myhost.test.ex
+<Date: Tue, 2 Mar 1999 09:44:33 +0000
+<
+<test
+>SPAMD/1.1 0 EX_OK
+>Spam: False ; 4.5 / 5.0
+>
+>Spam detection software, running on the system "demo",
+>has NOT identified this incoming email as spam. The original
+>message has been attached to this so you can view it or label
+>similar future email. If you have any questions, see
+>@@CONTACT_ADDRESS@@ for details.
+>
+>Content preview: test [...]
+>
+>Content analysis details: (4.5 points, 5.0 required)
+>
+> pts rule name description
+>---- ---------------------- --------------------------------------------------
+>-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
+> 1.2 MISSING_HEADERS Missing To: header
+> 1.0 MISSING_FROM Missing From: header
+> 1.8 MISSING_SUBJECT Missing Subject: header
+> 1.4 MISSING_DATE Missing Date: header
+> 0.1 MISSING_MID Missing Message-Id: header
+>
Expected EOF read from client
End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbB-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550 Administrative prohibition\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaY-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550 Administrative prohibition\r
+250 OK id=10HmaX-0005vi-00\r
221 myhost.test.ex closing connection\r
******** SERVER ********
-Listening on TESTSUITE/eximdir/fsec_sock ...
-Connection request
-<CONFIGURE ARCHIVE 1
->ignored_response
-<CONFIGURE TIMEOUT 0
->ignored_response
-<CONFIGURE MAXARCH 5
->ignored_response
-<CONFIGURE MIME 1
->ignored_response
-<SCAN TESTSUITE/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
->LF>random ignored line
->LF>random ignored line 2
->LF>OK\x09Scan ok.
-Expected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/fsec_sock ...
-Connection request
-<CONFIGURE ARCHIVE 1
->ignored_response
-<CONFIGURE TIMEOUT 0
->ignored_response
-<CONFIGURE MAXARCH 5
->ignored_response
-<CONFIGURE MIME 1
->ignored_response
-<SCAN TESTSUITE/spool/scan/10HmaZ-0005vi-00/10HmaZ-0005vi-00.eml
->LF>xxxINFECTED\x09blah\x09VNAME\x09blah
->LF>OK\x09Scan ok.
-Expected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/fsec_sock ...
-Connection request
-*sleep 3
-End of script
-Listening on TESTSUITE/eximdir/fsec_sock ...
-Connection request
-*sleep 3
-End of script
-Listening on TESTSUITE/eximdir/fsec_sock ...
-Connection request
-<CONFIGURE ARCHIVE 1
->ignored_response
-<CONFIGURE TIMEOUT 0
->ignored_response
-<CONFIGURE MAXARCH 5
->ignored_response
-<CONFIGURE MIME 1
->ignored_response
-<SCAN TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
->LF>xxxINFECTED\x09blah\x09VNAME\x09blah
->LF>OK\x09Scan ok.
+Listening on port 11333 ...
+Connection request from [127.0.0.1]
+<CHECK RSPAMC/1.3
+<Content-length: ddd
+<Queue-Id: 10HmaX-0005vi-00
+<From: <CALLER@myhost.test.ex>
+<Recipient-Number: 1
+<Rcpt: <userx@test.ex>
+<Helo: test.ex
+<User: CALLER
+<
+<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
+<X-Envelope-From: <CALLER@myhost.test.ex>
+<X-Envelope-To: userx@test.ex
+<Received: from CALLER (helo=test.ex)
+< by myhost.test.ex with local-esmtp (Exim x.yz)
+< (envelope-from <CALLER@myhost.test.ex>)
+< id 10HmaX-0005vi-00
+< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+<From: MAILER_DAEMON <>
+<Content-type: text/plain
+<Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+<Sender: CALLER_NAME <CALLER@myhost.test.ex>
+<Date: Tue, 2 Mar 1999 09:44:33 +0000
+<
+<test
+>RSPAMD/1.3 0 EX_OK
+>Metric: default; True; 15.00 / 15.00 / 0.0
+>Action: reject
+>Symbol: FAKE_SYMBOL_A(15.00)
+>Symbol: FAKE_SYMBOL_B(0.00)
+>Message-ID: undef
Expected EOF read from client
End of script
+++ /dev/null
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbB-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550 Administrative prohibition\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaZ-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbC-0005vi-00\r
-221 myhost.test.ex closing connection\r
-
-******** SERVER ********
-Listening on TESTSUITE/eximdir/clam_sock ...
-Connection request
-<SCAN TESTSUITE/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
->LF>scanned_file_name: OK
-Unexpected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/clam_sock ...
-Connection request
-<SCAN TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
->LF>scanned_file_name: 666 ERROR
-Unexpected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/clam_sock ...
-Connection request
-<SCAN TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
->LF>scanned_file_name: VNAME FOUND
-Unexpected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/clam_sock ...
-Connection request
-*sleep 3
-End of script
-Listening on TESTSUITE/eximdir/clam_sock ...
-Connection request
-*sleep 3
-End of script
-Inital pause of 2 seconds
-Listening on TESTSUITE/eximdir/clam_sock ...
-Connection request
-<SCAN TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00.eml
->LF>scanned_file_name: OK
-Unexpected EOF read from client
-End of script
354 Enter message, ending with "." on a line by itself\r
250 OK id=10HmaZ-0005vi-00\r
221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmbC-0005vi-00\r
+221 myhost.test.ex closing connection\r
******** SERVER ********
-Listening on TESTSUITE/eximdir/avast_sock ...
+Listening on TESTSUITE/eximdir/clam_sock ...
Connection request
->LF>220 ready
-<FLAGS -fullfiles
->LF>210 FLAGS DATA
->LF>200 FLAGS OK
-<SCAN TESTSUITE/spool/scan/10HmbB-0005vi-00
->LF>210 SCAN DATA
->LF>blah\x09[+]
->LF>200 SCAN OK
-<QUIT
+<SCAN TESTSUITE/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
+>LF>scanned_file_name: OK
Unexpected EOF read from client
End of script
-Listening on TESTSUITE/eximdir/avast_sock ...
+Listening on TESTSUITE/eximdir/clam_sock ...
Connection request
->LF>220 ready
-<SCAN TESTSUITE/spool/scan/10HmaX-0005vi-00
->LF>210 SCAN DATA
->LF>blah\x09[E]
->LF>200 SCAN OK
+<SCAN TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
+>LF>scanned_file_name: 666 ERROR
Unexpected EOF read from client
-Listening on TESTSUITE/eximdir/avast_sock ...
+End of script
+Listening on TESTSUITE/eximdir/clam_sock ...
Connection request
->LF>220 ready
-<SCAN TESTSUITE/spool/scan/10HmbA-0005vi-00
->LF>210 SCAN DATA
->LF>b\\ l\\ a\\ h\x09[L]9.9\x099 VNAME
->LF>200 SCAN OK
+<SCAN TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
+>LF>scanned_file_name: VNAME FOUND
Unexpected EOF read from client
-Listening on TESTSUITE/eximdir/avast_sock ...
+End of script
+Listening on TESTSUITE/eximdir/clam_sock ...
Connection request
*sleep 3
End of script
-Listening on TESTSUITE/eximdir/avast_sock ...
+Listening on TESTSUITE/eximdir/clam_sock ...
Connection request
*sleep 3
End of script
+Inital pause of 2 seconds
+Listening on TESTSUITE/eximdir/clam_sock ...
+Connection request
+<SCAN TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00.eml
+>LF>scanned_file_name: OK
+Unexpected EOF read from client
+End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbA-0005vi-00\r
+250 OK id=10HmbB-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+451 Temporary local problem - please try later\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250-myhost.test.ex Hello CALLER at test.ex\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaY-0005vi-00\r
+250 OK id=10HmaZ-0005vi-00\r
221 myhost.test.ex closing connection\r
+
+******** SERVER ********
+Listening on TESTSUITE/eximdir/avast_sock ...
+Connection request
+>LF>220 ready
+<FLAGS -fullfiles
+>LF>210 FLAGS DATA
+>LF>200 FLAGS OK
+<SCAN TESTSUITE/spool/scan/10HmbB-0005vi-00
+>LF>210 SCAN DATA
+>LF>blah\x09[+]
+>LF>200 SCAN OK
+<QUIT
+Unexpected EOF read from client
+End of script
+Listening on TESTSUITE/eximdir/avast_sock ...
+Connection request
+>LF>220 ready
+<SCAN TESTSUITE/spool/scan/10HmaX-0005vi-00
+>LF>210 SCAN DATA
+>LF>blah\x09[E]
+>LF>200 SCAN OK
+Unexpected EOF read from client
+Listening on TESTSUITE/eximdir/avast_sock ...
+Connection request
+>LF>220 ready
+<SCAN TESTSUITE/spool/scan/10HmbA-0005vi-00
+>LF>210 SCAN DATA
+>LF>b\\ l\\ a\\ h\x09[L]9.9\x099 VNAME
+>LF>200 SCAN OK
+Unexpected EOF read from client
+Listening on TESTSUITE/eximdir/avast_sock ...
+Connection request
+*sleep 3
+End of script
+Listening on TESTSUITE/eximdir/avast_sock ...
+Connection request
+*sleep 3
+End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaX-0005vi-00\r
+250 OK id=10HmbA-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+550 Administrative prohibition\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+451 Temporary local problem - please try later\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaY-0005vi-00\r
221 myhost.test.ex closing connection\r
-
-******** SERVER ********
-Listening on port 11333 ...
-Connection request from [127.0.0.1]
-<CHECK RSPAMC/1.3
-<Content-length: ddd
-<Queue-Id: 10HmaX-0005vi-00
-<From: <CALLER@myhost.test.ex>
-<Recipient-Number: 1
-<Rcpt: <userx@test.ex>
-<Helo: test.ex
-<User: CALLER
-<
-<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
-<X-Envelope-From: <CALLER@myhost.test.ex>
-<X-Envelope-To: userx@test.ex
-<Received: from CALLER (helo=test.ex)
-< by myhost.test.ex with local-esmtp (Exim x.yz)
-< (envelope-from <CALLER@myhost.test.ex>)
-< id 10HmaX-0005vi-00
-< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-<From: MAILER_DAEMON <>
-<Content-type: text/plain
-<Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
-<Sender: CALLER_NAME <CALLER@myhost.test.ex>
-<Date: Tue, 2 Mar 1999 09:44:33 +0000
-<
-<test
->RSPAMD/1.3 0 EX_OK
->Metric: default; True; 15.00 / 15.00 / 0.0
->Action: reject
->Symbol: FAKE_SYMBOL_A(15.00)
->Symbol: FAKE_SYMBOL_B(0.00)
->Message-ID: undef
-Expected EOF read from client
-End of script
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello fromuser at test.ex\r
+250-myhost.test.ex Hello CALLER at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaX-0005vi-00\r
+250 OK id=10HmbB-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello fromuser at test.ex\r
+250-myhost.test.ex Hello CALLER at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaY-0005vi-00\r
+451 Temporary local problem - please try later\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello fromuser at test.ex\r
+250-myhost.test.ex Hello CALLER at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaZ-0005vi-00\r
+550 Administrative prohibition\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello fromuser at test.ex\r
+250-myhost.test.ex Hello CALLER at test.ex\r
250-SIZE 52428800\r
250-8BITMIME\r
250-PIPELINING\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbA-0005vi-00\r
+451 Temporary local problem - please try later\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaZ-0005vi-00\r
221 myhost.test.ex closing connection\r
******** SERVER ********
-Listening on port 7833 ...
-Connection request from [127.0.0.1]
-<REPORT SPAMC/1.2
-<User: nobody
-<Content-length: ddd
-<
-<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
-<X-Envelope-From: <fromuser@myhost.test.ex>
-<X-Envelope-To: userx@test.ex
-<Received: from fromuser (helo=test.ex)
-< by myhost.test.ex with local-esmtp (Exim x.yz)
-< (envelope-from <fromuser@myhost.test.ex>)
-< id 10HmaX-0005vi-00
-< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-<Content-type: text/plain
-<Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
-<From: fromuser@myhost.test.ex
-<Date: Tue, 2 Mar 1999 09:44:33 +0000
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
+Listening on TESTSUITE/eximdir/sophie_sock ...
+Connection request
+<TESTSUITE/spool/scan/10HmbB-0005vi-00
+>0 no problems mate
Expected EOF read from client
End of script
-Listening on port 7833 ...
-Connection request from [127.0.0.1]
-<REPORT SPAMC/1.2
-<User: nobody
-<Content-length: ddd
-<
-<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
-<X-Envelope-From: <fromuser@myhost.test.ex>
-<X-Envelope-To: userx@test.ex
-<Received: from fromuser (helo=test.ex)
-< by myhost.test.ex with local-esmtp (Exim x.yz)
-< (envelope-from <fromuser@myhost.test.ex>)
-< id 10HmaY-0005vi-00
-< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-<Content-type: text/plain
-<Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
-<From: fromuser@myhost.test.ex
-<Date: Tue, 2 Mar 1999 09:44:33 +0000
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
+Listening on TESTSUITE/eximdir/sophie_sock ...
+Connection request
+<TESTSUITE/spool/scan/10HmaX-0005vi-00
+>-1 oops, internal error in scanner
Expected EOF read from client
End of script
-Inital pause of 2 seconds
-Listening on port 7833 ...
-Connection request from [127.0.0.1]
-<REPORT SPAMC/1.2
-<User: nobody
-<Content-length: ddd
-<
-<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
-<X-Envelope-From: <fromuser@myhost.test.ex>
-<X-Envelope-To: userx@test.ex
-<Received: from fromuser (helo=test.ex)
-< by myhost.test.ex with local-esmtp (Exim x.yz)
-< (envelope-from <fromuser@myhost.test.ex>)
-< id 10HmaZ-0005vi-00
-< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-<Content-type: text/plain
-<Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
-<From: fromuser@myhost.test.ex
-<Date: Tue, 2 Mar 1999 09:44:33 +0000
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
+Listening on TESTSUITE/eximdir/sophie_sock ...
+Connection request
+<TESTSUITE/spool/scan/10HmbA-0005vi-00
+>LF>1 VNAME
Expected EOF read from client
End of script
-Listening on port 7833 ...
-Connection request from [127.0.0.1]
-<REPORT SPAMC/1.2
-<User: nobody
-<Content-length: ddd
-<
-<From MAILER-DAEMON Tue Mar 02 09:44:33 1999
-<X-Envelope-From: <fromuser@myhost.test.ex>
-<X-Envelope-To: userx@test.ex
-<Received: from fromuser (helo=test.ex)
-< by myhost.test.ex with local-esmtp (Exim x.yz)
-< (envelope-from <fromuser@myhost.test.ex>)
-< id 10HmbA-0005vi-00
-< for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
-<Content-type: text/plain
-<Message-Id: <E10HmbA-0005vi-00@myhost.test.ex>
-<From: fromuser@myhost.test.ex
-<Date: Tue, 2 Mar 1999 09:44:33 +0000
-<
-<test
->SPAMD/1.1 0 EX_OK
->Spam: False ; 4.5 / 5.0
->
->Spam detection software, running on the system "demo",
->has NOT identified this incoming email as spam. The original
->message has been attached to this so you can view it or label
->similar future email. If you have any questions, see
->@@CONTACT_ADDRESS@@ for details.
->
->Content preview: test [...]
->
->Content analysis details: (4.5 points, 5.0 required)
->
-> pts rule name description
->---- ---------------------- --------------------------------------------------
->-1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP
-> 1.2 MISSING_HEADERS Missing To: header
-> 1.0 MISSING_FROM Missing From: header
-> 1.8 MISSING_SUBJECT Missing Subject: header
-> 1.4 MISSING_DATE Missing Date: header
-> 0.1 MISSING_MID Missing Message-Id: header
->
-Expected EOF read from client
+Listening on TESTSUITE/eximdir/sophie_sock ...
+Connection request
+*sleep 3
+End of script
+Listening on TESTSUITE/eximdir/sophie_sock ...
+Connection request
+*sleep 3
End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaX-0005vi-00\r
+250 OK id=10HmbB-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250-myhost.test.ex Hello CALLER at test.ex\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-550-Your message has been rejected but is being kept for evaluation.\r
-550-If it was a legitimate message, it may still be delivered to the target\r
-550 recipient(s).\r
+550 Administrative prohibition\r
221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+451 Temporary local problem - please try later\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaY-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+550 Administrative prohibition\r
+221 myhost.test.ex closing connection\r
+
+******** SERVER ********
+Listening on TESTSUITE/eximdir/fsec_sock ...
+Connection request
+<CONFIGURE ARCHIVE 1
+>ignored_response
+<CONFIGURE TIMEOUT 0
+>ignored_response
+<CONFIGURE MAXARCH 5
+>ignored_response
+<CONFIGURE MIME 1
+>ignored_response
+<SCAN TESTSUITE/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
+>LF>random ignored line
+>LF>random ignored line 2
+>LF>OK\x09Scan ok.
+Expected EOF read from client
+End of script
+Listening on TESTSUITE/eximdir/fsec_sock ...
+Connection request
+<CONFIGURE ARCHIVE 1
+>ignored_response
+<CONFIGURE TIMEOUT 0
+>ignored_response
+<CONFIGURE MAXARCH 5
+>ignored_response
+<CONFIGURE MIME 1
+>ignored_response
+<SCAN TESTSUITE/spool/scan/10HmaZ-0005vi-00/10HmaZ-0005vi-00.eml
+>LF>xxxINFECTED\x09blah\x09VNAME\x09blah
+>LF>OK\x09Scan ok.
+Expected EOF read from client
+End of script
+Listening on TESTSUITE/eximdir/fsec_sock ...
+Connection request
+*sleep 3
+End of script
+Listening on TESTSUITE/eximdir/fsec_sock ...
+Connection request
+*sleep 3
+End of script
+Listening on TESTSUITE/eximdir/fsec_sock ...
+Connection request
+<CONFIGURE ARCHIVE 1
+>ignored_response
+<CONFIGURE TIMEOUT 0
+>ignored_response
+<CONFIGURE MAXARCH 5
+>ignored_response
+<CONFIGURE MIME 1
+>ignored_response
+<SCAN TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
+>LF>xxxINFECTED\x09blah\x09VNAME\x09blah
+>LF>OK\x09Scan ok.
+Expected EOF read from client
+End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbA-0005vi-00\r
+250 OK id=10HmbD-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+451 Temporary local problem - please try later\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250-myhost.test.ex Hello CALLER at test.ex\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaY-0005vi-00\r
+250 OK id=10HmaZ-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmbA-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+550 Administrative prohibition\r
221 myhost.test.ex closing connection\r
******** SERVER ********
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<SCAN FILE TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
->0 <clean>
->*eof
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
+>200 ready
+<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbD-0005vi-00/10HmbD-0005vi-00.eml
+>200 done
+<quit
+>200 ready
+Expected EOF read from client
+End of script
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
+>2xx ready
+<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
+>5xx defer
+<quit
+>2xx ready
+Expected EOF read from client
End of script
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<SCAN FILE TESTSUITE/spool/scan/10HmaZ-0005vi-00/10HmaZ-0005vi-00.eml
->0 <infected: EICAR_Test_File> DIR/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
->*eof
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
+>2xx ready
+<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
+>322 VNAME found
+>2xx ready
+<quit
+>2xx ready
+Expected EOF read from client
End of script
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<SCAN FILE TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
*sleep 3
End of script
-Listening on port 1224 ...
-Connection request from [IP_LOOPBACK_ADDR]
-<SCAN FILE TESTSUITE/spool/scan/10HmaY-0005vi-00/10HmaY-0005vi-00.eml
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
*sleep 3
End of script
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
+>2xx ready
+<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
+>5xx defer
+<quit
+>2xx ready
+Expected EOF read from client
+End of script
+Listening on TESTSUITE/eximdir/aveserver_sock ...
+Connection request
+>2xx ready
+<SCAN bPQRSTUW TESTSUITE/spool/scan/10HmbC-0005vi-00/10HmbC-0005vi-00.eml
+>322 VNAME found
+>2xx ready
+<quit
+>2xx ready
+Expected EOF read from client
+End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaY-0005vi-00\r
+250 OK id=10HmaZ-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250-myhost.test.ex Hello CALLER at test.ex\r
354 Enter message, ending with "." on a line by itself\r
550 Administrative prohibition\r
221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+451 Temporary local problem - please try later\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmbA-0005vi-00\r
+221 myhost.test.ex closing connection\r
******** SERVER ********
Listening on port 1224 ...
Connection request from [IP_LOOPBACK_ADDR]
-TESTSUITE/spool/scan/10HmaY-0005vi-00/10HmaY-0005vi-00.eml
->LF>RESULT: OK
+<GET TESTSUITE/spool/scan/10HmaZ-0005vi-00/10HmaZ-0005vi-00.eml HTTP/1.0
+<
+><summary code="11">
+>*eof
+End of script
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+<GET TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml HTTP/1.0
+<
+>
+>
+>
+><detected type="foo">
+><name>wibble</name>
+><summary code="11">
+>*eof
+End of script
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+<GET TESTSUITE/spool/scan/10HmaY-0005vi-00/10HmaY-0005vi-00.eml HTTP/1.0
+*sleep 3
End of script
Listening on port 1224 ...
Connection request from [IP_LOOPBACK_ADDR]
-TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
->LF>RESULT: BAD
->LF>NAME: wibble
+<GET TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml HTTP/1.0
+*sleep 3
End of script
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbB-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-451 Temporary local problem - please try later\r
+250 OK id=10HmbA-0005vi-00\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250-myhost.test.ex Hello CALLER at test.ex\r
250 OK\r
250 Accepted\r
354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaZ-0005vi-00\r
+250 OK id=10HmaY-0005vi-00\r
221 myhost.test.ex closing connection\r
******** SERVER ********
-Listening on TESTSUITE/eximdir/sophie_sock ...
-Connection request
-<TESTSUITE/spool/scan/10HmbB-0005vi-00
->0 no problems mate
-Expected EOF read from client
-End of script
-Listening on TESTSUITE/eximdir/sophie_sock ...
-Connection request
-<TESTSUITE/spool/scan/10HmaX-0005vi-00
->-1 oops, internal error in scanner
-Expected EOF read from client
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+<SCAN FILE TESTSUITE/spool/scan/10HmbA-0005vi-00/10HmbA-0005vi-00.eml
+>0 <clean>
+>*eof
End of script
-Listening on TESTSUITE/eximdir/sophie_sock ...
-Connection request
-<TESTSUITE/spool/scan/10HmbA-0005vi-00
->LF>1 VNAME
-Expected EOF read from client
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+<SCAN FILE TESTSUITE/spool/scan/10HmaZ-0005vi-00/10HmaZ-0005vi-00.eml
+>0 <infected: EICAR_Test_File> DIR/spool/scan/10HmbB-0005vi-00/10HmbB-0005vi-00.eml
+>*eof
End of script
-Listening on TESTSUITE/eximdir/sophie_sock ...
-Connection request
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+<SCAN FILE TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
*sleep 3
End of script
-Listening on TESTSUITE/eximdir/sophie_sock ...
-Connection request
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+<SCAN FILE TESTSUITE/spool/scan/10HmaY-0005vi-00/10HmaY-0005vi-00.eml
*sleep 3
End of script
--- /dev/null
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaY-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello CALLER at test.ex\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+550 Administrative prohibition\r
+221 myhost.test.ex closing connection\r
+
+******** SERVER ********
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+TESTSUITE/spool/scan/10HmaY-0005vi-00/10HmaY-0005vi-00.eml
+>LF>RESULT: OK
+End of script
+Listening on port 1224 ...
+Connection request from [IP_LOOPBACK_ADDR]
+TESTSUITE/spool/scan/10HmaX-0005vi-00/10HmaX-0005vi-00.eml
+>LF>RESULT: BAD
+>LF>NAME: wibble
+End of script
+++ /dev/null
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaY-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaZ-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbA-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550-Your message has been rejected but is being kept for evaluation.\r
-550-If it was a legitimate message, it may still be delivered to the target\r
-550 recipient(s).\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmbC-0005vi-00\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-PIPELINING\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-450-Your message has been rejected but is being kept for evaluation.\r
-450-If it was a legitimate message, it may still be delivered to the target\r
-450 recipient(s).\r
-221 myhost.test.ex closing connection\r
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-550 Found Eicar-Test-Signature\r
-221 myhost.test.ex closing connection\r
+++ /dev/null
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250-STARTTLS\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaX-0005vi-00\r
-221 myhost.test.ex closing connection\r
+++ /dev/null
-220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
-250-myhost.test.ex Hello CALLER at test.ex\r
-250-SIZE 52428800\r
-250-8BITMIME\r
-250-PIPELINING\r
-250-STARTTLS\r
-250 HELP\r
-250 OK\r
-250 Accepted\r
-354 Enter message, ending with "." on a line by itself\r
-250 OK id=10HmaX-0005vi-00\r
-221 myhost.test.ex closing connection\r
projects / exim.git / commitdiff