# if OPENSSL_VERSION_NUMBER >= 0x010100000L
# define EXIM_HAVE_OPENSSL_CHECKHOST
# define EXIM_HAVE_OPENSSL_DH_BITS
+# define EXIM_HAVE_OPENSSL_TLS_METHOD
# endif
# if OPENSSL_VERSION_NUMBER >= 0x010000000L \
&& (OPENSSL_VERSION_NUMBER & 0x0000ff000L) >= 0x000002000L
SNI handling.
Separately we might try to replace using OCSP_basic_verify() - which seems to not
-be a public interface into the OpenSSL library (there's no manual entry) -
+be a public interface into the OpenSSL library (there's no manual entry) -
But what with? We also use OCSP_basic_verify in the client stapling callback.
And there we NEED it; we must verify that status... unless the
library does it for us anyway? */
goto err;
X509_set_version(x509, 2); /* N+1 - version 3 */
-ASN1_INTEGER_set(X509_get_serialNumber(x509), 0);
+ASN1_INTEGER_set(X509_get_serialNumber(x509), 1);
X509_gmtime_adj(X509_get_notBefore(x509), 0);
X509_gmtime_adj(X509_get_notAfter(x509), (long)60 * 60); /* 1 hour */
X509_set_pubkey(x509, pkey);
not confident that memcpy wouldn't break some internal reference counting.
Especially since there's a references struct member, which would be off. */
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(server_sni = SSL_CTX_new(TLS_server_method())))
+#else
if (!(server_sni = SSL_CTX_new(SSLv23_server_method())))
+#endif
{
ERR_error_string(ERR_get_error(), ssl_errstring);
DEBUG(D_tls) debug_printf("SSL_CTX_new() failed: %s\n", ssl_errstring);
By disabling with openssl_options, we can let admins re-enable with the
existing knob. */
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(ctx = SSL_CTX_new(host ? TLS_client_method() : TLS_server_method())))
+#else
if (!(ctx = SSL_CTX_new(host ? SSLv23_client_method() : SSLv23_server_method())))
+#endif
return tls_error(US"SSL_CTX_new", host, NULL, errstr);
/* It turns out that we need to seed the random number generator this early in
else
DEBUG(D_tls) debug_printf("no SSL CTX options to set\n");
-/* Disable session cache unconditionally */
-
+/* We'd like to disable session cache unconditionally, but foolish Outlook
+Express clients then give up the first TLS connection and make a second one
+(which works). Only when there is an IMAP service on the same machine.
+Presumably OE is trying to use the cache for A on B. Leave it enabled for
+now, until we work out a decent way of presenting control to the config. It
+will never be used because we use a new context every time. */
+#ifdef notdef
(void) SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF);
+#endif
/* Initialize with DH parameters if supplied */
/* Initialize ECDH temp key parameter selection */
}
# endif
-if (host == NULL) /* server */
+if (!host) /* server */
{
# ifndef DISABLE_OCSP
/* We check u_ocsp.server.file, not server.response, because we care about if
static void
construct_cipher_name(SSL *ssl, uschar *cipherbuf, int bsize, int *bits)
{
-/* With OpenSSL 1.0.0a, this needs to be const but the documentation doesn't
+/* With OpenSSL 1.0.0a, 'c' needs to be const but the documentation doesn't
yet reflect that. It should be a safe change anyway, even 0.9.8 versions have
the accessor functions use const in the prototype. */
-const SSL_CIPHER *c;
-const uschar *ver;
-ver = (const uschar *)SSL_get_version(ssl);
+const uschar * ver = CUS SSL_get_version(ssl);
+const SSL_CIPHER * c = (const SSL_CIPHER *) SSL_get_current_cipher(ssl);
-c = (const SSL_CIPHER *) SSL_get_current_cipher(ssl);
SSL_CIPHER_get_bits(c, bits);
string_format(cipherbuf, bsize, "%s:%s:%u", ver,
* Set up for verifying certificates *
*************************************************/
+#ifndef DISABLE_OCSP
/* Load certs from file, return TRUE on success */
static BOOL
BIO_free(bp);
return TRUE;
}
+#endif
*/
if (file)
{
- tls_ext_ctx_cb * cbinfo = host
- ? client_static_cbinfo : server_static_cbinfo;
STACK_OF(X509_NAME) * names = SSL_load_client_CA_file(CS file);
SSL_CTX_set_client_CA_list(sctx, names);
tls_out.certificate_verified = FALSE;
client_verify_callback_called = FALSE;
-if (!expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
- &expciphers, errstr))
+expciphers = NULL;
+#ifdef SUPPORT_DANE
+if (tlsa_dnsa)
+ {
+ /* We fall back to tls_require_ciphers if unset, empty or forced failure, but
+ other failures should be treated as problems. */
+ if (ob->dane_require_tls_ciphers &&
+ !expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
+ &expciphers, errstr))
+ return FAIL;
+ if (expciphers && *expciphers == '\0')
+ expciphers = NULL;
+ }
+#endif
+if (!expciphers &&
+ !expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
+ &expciphers, errstr))
return FAIL;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
client_static_cbinfo, errstr)) != OK)
return rc;
-if ((client_ssl = SSL_new(client_ctx)) == NULL)
+if (!(client_ssl = SSL_new(client_ctx)))
return tls_error(US"SSL_new", host, NULL, errstr);
SSL_set_session_id_context(client_ssl, sid_ctx, Ustrlen(sid_ctx));
SSL_set_fd(client_ssl, fd);
inbytes = SSL_read(server_ssl, CS ssl_xfer_buffer,
MIN(ssl_xfer_buffer_size, lim));
error = SSL_get_error(server_ssl, inbytes);
-alarm(0);
+if (smtp_receive_timeout > 0) alarm(0);
+
+if (had_command_timeout) /* set by signal handler */
+ smtp_command_timeout_exit(); /* does not return */
+if (had_command_sigterm)
+ smtp_command_sigterm_exit();
+if (had_data_timeout)
+ smtp_data_timeout_exit();
+if (had_data_sigint)
+ smtp_data_sigint_exit();
/* SSL_ERROR_ZERO_RETURN appears to mean that the SSL session has been
closed down, not that the socket itself has been closed down. Revert to
if (SSL_get_shutdown(server_ssl) == SSL_RECEIVED_SHUTDOWN)
SSL_shutdown(server_ssl);
+#ifndef DISABLE_OCSP
sk_X509_pop_free(server_static_cbinfo->verify_stack, X509_free);
+ server_static_cbinfo->verify_stack = NULL;
+#endif
SSL_free(server_ssl);
SSL_CTX_free(server_ctx);
- server_static_cbinfo->verify_stack = NULL;
server_ctx = NULL;
server_ssl = NULL;
tls_in.active = -1;
}
}
+#ifndef DISABLE_OCSP
if (is_server)
{
sk_X509_pop_free(server_static_cbinfo->verify_stack, X509_free);
server_static_cbinfo->verify_stack = NULL;
}
+#endif
SSL_CTX_free(*ctxp);
SSL_free(*sslp);
err = NULL;
-ctx = SSL_CTX_new(SSLv23_server_method());
-if (!ctx)
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(ctx = SSL_CTX_new(TLS_server_method())))
+#else
+if (!(ctx = SSL_CTX_new(SSLv23_server_method())))
+#endif
{
ERR_error_string(ERR_get_error(), ssl_errstring);
return string_sprintf("SSL_CTX_new() failed: %s", ssl_errstring);