/**
* Note that this installer has been based of the SilverStripe installer.
* You can get more information from the SilverStripe Website at
- * http://www.silverstripe.com/. Please check
- * http://www.silverstripe.com/licensing for licensing details.
+ * http://www.silverstripe.com/.
*
* Copyright (c) 2006-7, SilverStripe Limited - www.silverstripe.com
* All rights reserved.
*
- * Changes and modifications (c) 2007-8 by CiviCRM LLC
+ * License: BSD-3-clause
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * Neither the name of SilverStripe nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Changes and modifications (c) 2007-2015 by CiviCRM LLC
*
*/
}
global $installType;
-$installType = strtolower($_SESSION['civicrm_install_type']);
-
-if (!in_array($installType, array('drupal', 'wordpress'))) {
- $errorTitle = "Oops! Unsupported installation mode";
- $errorMsg = "";
- errorDisplayPage($errorTitle, $errorMsg);
-}
-
global $crmPath;
+global $pkgPath;
global $installDirPath;
global $installURLPath;
+
+$installType = strtolower($_SESSION['civicrm_install_type']);
+
if ($installType == 'drupal') {
$crmPath = dirname(dirname($_SERVER['SCRIPT_FILENAME']));
$installDirPath = $installURLPath = '';
elseif ($installType == 'wordpress') {
$crmPath = WP_PLUGIN_DIR . DIRECTORY_SEPARATOR . 'civicrm' . DIRECTORY_SEPARATOR . 'civicrm' . DIRECTORY_SEPARATOR;
$installDirPath = WP_PLUGIN_DIR . DIRECTORY_SEPARATOR . 'civicrm' . DIRECTORY_SEPARATOR . 'civicrm' . DIRECTORY_SEPARATOR . 'install' . DIRECTORY_SEPARATOR;
-
$installURLPath = WP_PLUGIN_URL . DIRECTORY_SEPARATOR . 'civicrm' . DIRECTORY_SEPARATOR . 'civicrm' . DIRECTORY_SEPARATOR . 'install' . DIRECTORY_SEPARATOR;
}
+else {
+ $errorTitle = "Oops! Unsupported installation mode";
+ $errorMsg = sprintf('%s: unknown installation mode. Please refer to the online documentation for more information.', $installType);
+ errorDisplayPage($errorTitle, $errorMsg, FALSE);
+}
-set_include_path(get_include_path() . PATH_SEPARATOR . $crmPath);
+$pkgPath = $crmPath . DIRECTORY_SEPARATOR . 'packages';
require_once $crmPath . '/CRM/Core/ClassLoader.php';
CRM_Core_ClassLoader::singleton()->register();
-$docLink = CRM_Utils_System::docURL2('Installation and Upgrades', FALSE, 'Installation Guide', NULL, NULL, "wiki");
-
-if ($installType == 'drupal') {
- //lets check only /modules/.
- $pattern = '/' . preg_quote(CIVICRM_DIRECTORY_SEPARATOR . 'modules', CIVICRM_DIRECTORY_SEPARATOR) . '/';
-
- if (!preg_match($pattern,
- str_replace("\\", "/", $_SERVER['SCRIPT_FILENAME'])
- )
- ) {
- $errorTitle = "Oops! Please Correct Your Install Location";
- $errorMsg = "Please untar (uncompress) your downloaded copy of CiviCRM in the <strong>" . implode(CIVICRM_DIRECTORY_SEPARATOR, array(
- 'sites',
- 'all',
- 'modules',
- )) . "</strong> directory below your Drupal root directory. Refer to the online " . $docLink . " for more information.";
- errorDisplayPage($errorTitle, $errorMsg);
- }
-}
-
// Load civicrm database config
if (isset($_REQUEST['mysql'])) {
$databaseConfig = $_REQUEST['mysql'];
}
}
+// Set the locale (required by CRM_Core_Config)
+// This is mostly sympbolic, since nothing we do during the install
+// really requires CIVICRM_UF to be defined.
+$installTypeToUF = array(
+ 'wordpress' => 'WordPress',
+ 'drupal' => 'Drupal',
+);
+
+$uf = (isset($installTypeToUF[$installType]) ? $installTypeToUF[$installType] : 'Drupal');
+define('CIVICRM_UF', $uf);
+
+global $tsLocale;
+
+$tsLocale = 'en_US';
$seedLanguage = 'en_US';
+
if (isset($_REQUEST['seedLanguage']) and isset($langs[$_REQUEST['seedLanguage']])) {
$seedLanguage = $_REQUEST['seedLanguage'];
+ $tsLocale = $_REQUEST['seedLanguage'];
}
+$config = CRM_Core_Config::singleton(FALSE);
+$GLOBALS['civicrm_default_error_scope'] = NULL;
+
+// The translation files are in the parent directory (l10n)
+$config->gettextResourceDir = '..' . DIRECTORY_SEPARATOR . $config->gettextResourceDir;
+$i18n = CRM_Core_I18n::singleton();
+
global $cmsPath;
if ($installType == 'drupal') {
//CRM-6840 -don't force to install in sites/all/modules/
);
}
+if ($installType == 'drupal') {
+ // Lets check only /modules/.
+ $pattern = '/' . preg_quote(CIVICRM_DIRECTORY_SEPARATOR . 'modules', CIVICRM_DIRECTORY_SEPARATOR) . '/';
+
+ if (!preg_match($pattern, str_replace("\\", "/", $_SERVER['SCRIPT_FILENAME']))) {
+ $directory = implode(CIVICRM_DIRECTORY_SEPARATOR, array('sites', 'all', 'modules'));
+ $errorTitle = ts("Oops! Please correct your install location");
+ $errorMsg = ts("Please untar (uncompress) your downloaded copy of CiviCRM in the <strong>%1</strong> directory below your Drupal root directory.", array(1 => $directory));
+ errorDisplayPage($errorTitle, $errorMsg);
+ }
+}
+
// Exit with error if CiviCRM has already been installed.
if ($alreadyInstalled) {
- $errorTitle = "Oops! CiviCRM is Already Installed";
- if ($installType == 'drupal') {
+ $errorTitle = ts("Oops! CiviCRM is already installed");
+ $settings_directory = $cmsPath;
- $errorMsg = "CiviCRM has already been installed in this Drupal site. <ul><li>To <strong>start over</strong>, you must delete or rename the existing CiviCRM settings file - <strong>civicrm.settings.php</strong> - from <strong>" . implode(CIVICRM_DIRECTORY_SEPARATOR, array(
- '[your Drupal root directory]',
- 'sites',
- $siteDir,
- )) . "</strong>.</li><li>To <strong>upgrade an existing installation</strong>, refer to the online " . $docLink . ".</li></ul>";
- }
- elseif ($installType == 'wordpress') {
- $errorMsg = "CiviCRM has already been installed in this WordPress site. <ul><li>To <strong>start over</strong>, you must delete or rename the existing CiviCRM settings file - <strong>civicrm.settings.php</strong> - from <strong>" . $cmsPath . "</strong>.</li><li>To <strong>upgrade an existing installation</strong>, refer to the online " . $docLink . ".</li></ul>";
+ if ($installType == 'drupal') {
+ $settings_directory = implode(CIVICRM_DIRECTORY_SEPARATOR, array(
+ ts('[your Drupal root directory]'),
+ 'sites',
+ $siteDir,
+ ));
}
- errorDisplayPage($errorTitle, $errorMsg);
+
+ $docLink = CRM_Utils_System::docURL2('Installation and Upgrades', FALSE, ts('Installation Guide'), NULL, NULL, "wiki");
+ $errorMsg = ts("CiviCRM has already been installed. <ul><li>To <strong>start over</strong>, you must delete or rename the existing CiviCRM settings file - <strong>civicrm.settings.php</strong> - from <strong>%1</strong>.</li><li>To <strong>upgrade an existing installation</strong>, <a href='%2'>refer to the online documentation</a>.</li></ul>", array(1 => $settings_directory, 2 => $docLink));
+ errorDisplayPage($errorTitle, $errorMsg, FALSE);
}
$versionFile = $crmPath . CIVICRM_DIRECTORY_SEPARATOR . 'civicrm-version.php';
if ($installType == 'drupal') {
// Ensure that they have downloaded the correct version of CiviCRM
- if ($civicrm_version['cms'] != 'Drupal' &&
- $civicrm_version['cms'] != 'Drupal6'
- ) {
- $errorTitle = "Oops! Incorrect CiviCRM Version";
- $errorMsg = "This installer can only be used for the Drupal version of CiviCRM. Refer to the online " . $docLink . " for information about installing CiviCRM on PHP4 servers OR installing CiviCRM for Joomla!";
+ if ($civicrm_version['cms'] != 'Drupal' && $civicrm_version['cms'] != 'Drupal6') {
+ $errorTitle = ts("Oops! Incorrect CiviCRM version");
+ $errorMsg = ts("This installer can only be used for the Drupal version of CiviCRM.");
errorDisplayPage($errorTitle, $errorMsg);
}
}
if (!defined('VERSION') or version_compare(VERSION, '6.0') < 0) {
- $errorTitle = "Oops! Incorrect Drupal Version";
- $errorMsg = "This version of CiviCRM can only be used with Drupal 6.x or 7.x. Please ensure that '" . implode("' or '", $drupalVersionFiles) . "' exists if you are running Drupal 7.0 and over. Refer to the online " . $docLink . " for information about installing CiviCRM.";
+ $errorTitle = ts("Oops! Incorrect Drupal version");
+ $errorMsg = ts("This version of CiviCRM can only be used with Drupal 6.x or 7.x. Please ensure that '%1' exists if you are running Drupal 7.0 and over.", array(1 => implode("' or '", $drupalVersionFiles)));
errorDisplayPage($errorTitle, $errorMsg);
}
}
// Ensure that they have downloaded the correct version of CiviCRM
if ($civicrm_version['cms'] != 'WordPress') {
- $errorTitle = "Oops! Incorrect CiviCRM Version";
- $errorMsg = "This installer can only be used for the WordPress version of CiviCRM. Refer to the online " . $docLink . " for information about installing CiviCRM for Drupal or Joomla!";
+ $errorTitle = ts("Oops! Incorrect CiviCRM version");
+ $errorMsg = ts("This installer can only be used for the WordPress version of CiviCRM.");
errorDisplayPage($errorTitle, $errorMsg);
}
}
* This class checks requirements
* Each of the requireXXX functions takes an argument which gives a user description of the test. It's an array
* of 3 parts:
- * $description[0] - The test catetgory
+ * $description[0] - The test category
* $description[1] - The test title
* $description[2] - The test error to show, if it goes wrong
*/
public function checkdatabase($databaseConfig, $dbName) {
if ($this->requireFunction('mysql_connect',
array(
- "PHP Configuration",
- "MySQL support",
- "MySQL support not included in PHP.",
+ ts("PHP Configuration"),
+ ts("MySQL support"),
+ ts("MySQL support not included in PHP."),
)
)
) {
$this->requireMySQLServer($databaseConfig['server'],
array(
- "MySQL $dbName Configuration",
- "Does the server exist",
- "Can't find the a MySQL server on '$databaseConfig[server]'",
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("Does the server exist?"),
+ ts("Can't find the a MySQL server on '%1'.", array(1 => $databaseConfig['server'])),
$databaseConfig['server'],
)
);
$databaseConfig['username'],
$databaseConfig['password'],
array(
- "MySQL $dbName Configuration",
- "Are the access credentials correct",
- "That username/password doesn't work",
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("Are the access credentials correct?"),
+ ts("That username/password doesn't work"),
)
)
) {
@$this->requireMySQLVersion("5.1",
array(
- "MySQL $dbName Configuration",
- "MySQL version at least 5.1",
- "MySQL version 5.1 or higher is required, you only have ",
- "MySQL " . mysql_get_server_info(),
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("MySQL version at least %1", array(1 => '5.1')),
+ ts("MySQL version %1 or higher is required, you are running MySQL %2.", array(1 => '5.1', 2 => mysql_get_server_info())),
+ ts("MySQL %1", array(1 => mysql_get_server_info())),
)
);
$this->requireMySQLAutoIncrementIncrementOne($databaseConfig['server'],
$databaseConfig['username'],
$databaseConfig['password'],
array(
- "MySQL $dbName Configuration",
- "Is auto_increment_increment set to 1",
- "An auto_increment_increment value greater than 1 is not currently supported. Please see issue CRM-7923 for further details and potential workaround.",
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("Is auto_increment_increment set to 1"),
+ ts("An auto_increment_increment value greater than 1 is not currently supported. Please see issue CRM-7923 for further details and potential workaround."),
)
);
$this->requireMySQLThreadStack($databaseConfig['server'],
$databaseConfig['database'],
self::MINIMUM_THREAD_STACK,
array(
- "MySQL $dbName Configuration",
- "Does MySQL thread_stack meet minimum (" . self::MINIMUM_THREAD_STACK . "k)",
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("Does MySQL thread_stack meet minimum (%1k)", array(1 => self::MINIMUM_THREAD_STACK)),
"",
// "The MySQL thread_stack does not meet minimum " . CRM_Upgrade_Form::MINIMUM_THREAD_STACK . "k. Please update thread_stack in my.cnf.",
)
$databaseConfig['password'],
$databaseConfig['database'],
array(
- "MySQL $dbName Configuration",
- "Can I access/create the database",
- "I can't create new databases and the database '$databaseConfig[database]' doesn't exist",
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("Can I access/create the database?"),
+ ts("I can't create new databases and the database '%1' doesn't exist.", array(1 => $databaseConfig['database'])),
),
$onlyRequire
);
$databaseConfig['password'],
$databaseConfig['database'],
array(
- "MySQL $dbName Configuration",
- "Can I access/create InnoDB tables in the database",
- "Unable to create InnoDB tables. MySQL InnoDB support is required for CiviCRM but is either not available or not enabled in this MySQL database server.",
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts("Can I access/create InnoDB tables in the database?"),
+ ts("Unable to create InnoDB tables. MySQL InnoDB support is required for CiviCRM but is either not available or not enabled in this MySQL database server."),
)
);
$this->requireMySQLTempTables($databaseConfig['server'],
$databaseConfig['password'],
$databaseConfig['database'],
array(
- "MySQL $dbName Configuration",
- 'Can I create temporary tables in the database',
- 'Unable to create temporary tables. This MySQL user is missing the CREATE TEMPORARY TABLES privilege.',
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts('Can I create temporary tables in the database?'),
+ ts('Unable to create temporary tables. This MySQL user is missing the CREATE TEMPORARY TABLES privilege.'),
)
);
$this->requireMySQLLockTables($databaseConfig['server'],
$databaseConfig['password'],
$databaseConfig['database'],
array(
- "MySQL $dbName Configuration",
- 'Can I create lock tables in the database',
- 'Unable to lock tables. This MySQL user is missing the LOCK TABLES privilege.',
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts('Can I create lock tables in the database?'),
+ ts('Unable to lock tables. This MySQL user is missing the LOCK TABLES privilege.'),
)
);
$this->requireMySQLTrigger($databaseConfig['server'],
$databaseConfig['password'],
$databaseConfig['database'],
array(
- "MySQL $dbName Configuration",
- 'Can I create triggers in the database',
- 'Unable to create triggers. This MySQL user is missing the CREATE TRIGGERS privilege.',
+ ts("MySQL %1 Configuration", array(1 => $dbName)),
+ ts('Can I create triggers in the database?'),
+ ts('Unable to create triggers. This MySQL user is missing the CREATE TRIGGERS privilege.'),
)
);
}
$this->errors = NULL;
$this->requirePHPVersion('5.3.3', array(
- "PHP Configuration",
- "PHP5 installed",
+ ts("PHP Configuration"),
+ ts("PHP5 installed"),
NULL,
- "PHP version " . phpversion(),
+ ts("PHP version %1", array(1 => phpversion())),
));
// Check that we can identify the root folder successfully
$this->requireFile($crmPath . CIVICRM_DIRECTORY_SEPARATOR . 'README.txt',
array(
- "File permissions",
- "Does the webserver know where files are stored?",
- "The webserver isn't letting me identify where files are stored.",
+ ts("File permissions"),
+ ts("Does the webserver know where files are stored?"),
+ ts("The webserver isn't letting me identify where files are stored."),
$this->getBaseDir(),
),
TRUE
// CRM-6485: make sure the path does not contain PATH_SEPARATOR, as we don’t know how to escape it
$this->requireNoPathSeparator(
array(
- 'File permissions',
- 'does the CiviCRM path contain PATH_SEPARATOR?',
- 'the ' . $this->getBaseDir() . ' path contains PATH_SEPARATOR (the ' . PATH_SEPARATOR . ' character)',
+ ts("File permissions"),
+ ts('Does the CiviCRM path contain PATH_SEPARATOR?'),
+ ts('The path %1 contains PATH_SEPARATOR (the %2 character).', array(1 => $this->getBaseDir(), 2 => PATH_SEPARATOR)),
$this->getBaseDir(),
)
);
foreach ($requiredDirectories as $dir) {
$this->requireFile($crmPath . CIVICRM_DIRECTORY_SEPARATOR . $dir,
array(
- "File permissions",
- "$dir folder exists",
- "There is no $dir folder",
+ ts("File permissions"),
+ ts("Folder '%1' exists?", array(1 => $dir)),
+ ts("There is no '%1' folder.", array(1 => $dir)),
), TRUE
);
}
foreach ($writableDirectories as $dir) {
$dirName = CIVICRM_WINDOWS ? $dir : CIVICRM_DIRECTORY_SEPARATOR . $dir;
- $this->requireWriteable($dirName,
- array("File permissions", "Is the $dir folder writeable?", NULL),
- TRUE
+ $testDetails = array(
+ ts("File permissions"),
+ ts("Is the %1 folder writeable?", array(1 => $dir)),
+ NULL,
);
+ $this->requireWriteable($dirName, $testDetails, TRUE);
}
//check for Config.IDS.ini, file may exist in re-install
}
if ($webserver == '') {
- $webserver = "I can't tell what webserver you are running";
+ $webserver = ts("I can't tell what webserver you are running");
}
// Check for $_SERVER configuration
$this->requireServerVariables(array('SCRIPT_NAME', 'HTTP_HOST', 'SCRIPT_FILENAME'), array(
- "Webserver config",
- "Recognised webserver",
- "You seem to be using an unsupported webserver. The server variables SCRIPT_NAME, HTTP_HOST, SCRIPT_FILENAME need to be set.",
+ ts("Webserver config"),
+ ts("Recognised webserver"),
+ ts("You seem to be using an unsupported webserver. The server variables SCRIPT_NAME, HTTP_HOST, SCRIPT_FILENAME need to be set."),
));
// Check for MySQL support
- $this->requireFunction('mysql_connect',
- array("PHP Configuration", "MySQL support", "MySQL support not included in PHP.")
- );
+ $this->requireFunction('mysql_connect', array(
+ ts("PHP Configuration"),
+ ts("MySQL support"),
+ ts("MySQL support not included in PHP."),
+ ));
// Check for JSON support
- $this->requireFunction('json_encode',
- array("PHP Configuration", "JSON support", "JSON support not included in PHP.")
- );
+ $this->requireFunction('json_encode', array(
+ ts("PHP Configuration"),
+ ts("JSON support"),
+ ts("JSON support not included in PHP."),
+ ));
// Check for xcache_isset and emit warning if exists
$this->checkXCache(array(
- "PHP Configuration",
- "XCache compatibility",
- "XCache is installed and there are known compatibility issues between XCache and CiviCRM. Consider using an alternative PHP caching mechanism or disable PHP caching altogether.",
+ ts("PHP Configuration"),
+ ts("XCache compatibility"),
+ ts("XCache is installed and there are known compatibility issues between XCache and CiviCRM. Consider using an alternative PHP caching mechanism or disable PHP caching altogether."),
));
// Check memory allocation
$this->requireMemory(32 * 1024 * 1024,
64 * 1024 * 1024,
array(
- "PHP Configuration",
- "Memory allocated (PHP config option 'memory_limit')",
- "CiviCRM needs a minimum of 32M allocated to PHP, but recommends 64M.",
+ ts("PHP Configuration"),
+ ts("Memory allocated (PHP config option 'memory_limit')"),
+ ts("CiviCRM needs a minimum of %1 MB allocated to PHP, but recommends %2 MB.", array(1 => 32, 2 => 64)),
ini_get("memory_limit"),
)
);
$mem = $this->getPHPMemory();
if ($mem < $min && $mem > 0) {
- $testDetails[2] .= " You only have " . ini_get("memory_limit") . " allocated";
+ $testDetails[2] .= " " . ts("You only have %1 allocated", array(1 => ini_get("memory_limit")));
$this->error($testDetails);
}
elseif ($mem < $recommended && $mem > 0) {
- $testDetails[2] .= " You only have " . ini_get("memory_limit") . " allocated";
+ $testDetails[2] .= " " . ts("You only have %1 allocated", array(1 => ini_get("memory_limit")));
$this->warning($testDetails);
}
elseif ($mem == 0) {
- $testDetails[2] .= " We can't determine how much memory you have allocated. Install only if you're sure you've allocated at least 20 MB.";
+ $testDetails[2] .= " " . ts("We can't determine how much memory you have allocated. Install only if you're sure you've allocated at least %1 MB.", array(1 => 32));
$this->warning($testDetails);
}
}
public function listErrors() {
if ($this->errors) {
- echo "<p>The following problems are preventing me from installing CiviCRM:</p>";
+ echo "<p>" . ts("The following problems are preventing me from installing CiviCRM:") . "</p>";
foreach ($this->errors as $error) {
echo "<li>" . htmlentities($error) . "</li>";
}
if (!$testDetails[2]) {
if (!$aboveMinVersion) {
- $testDetails[2] = "You need PHP version $minVersion or later, only {$phpVersion} is installed. Please upgrade your server, or ask your web-host to do so.";
+ $testDetails[2] = ts("You need PHP version %1 or later, only %2 is installed. Please upgrade your server, or ask your web-host to do so.", array(1 => $minVersion, 2 => $phpVersion));
}
else {
- $testDetails[2] = "PHP version {$phpVersion} is not supported. PHP version earlier than $maxVersion is required. You might want to downgrade your server, or ask your web-host to do so.";
+ $testDetails[2] = ts("PHP version %1 is not supported. PHP version earlier than %2 is required. You might want to downgrade your server, or ask your web-host to do so.", array(1 => $maxVersion, 2 => $phpVersion));
}
}
$filename = $this->getBaseDir() . $filename;
}
if (!file_exists($filename)) {
- $testDetails[2] .= " (file '$filename' not found)";
+ $testDetails[2] .= " (" . ts("file '%1' not found", array(1 => $filename)) . ')';
$this->error($testDetails);
}
}
$this->testing($testDetails);
$filename = $this->getBaseDir() . $filename;
if (file_exists($filename)) {
- $testDetails[2] .= " (file '$filename' found)";
+ $testDetails[2] .= " (" . ts("file '%1' found", array(1 => $filename)) . ")";
$this->error($testDetails);
}
}
if (!isset($testDetails[2])) {
$testDetails[2] = NULL;
}
- $testDetails[2] .= "The user account used by your web-server $name needs to be granted write access to the following directory in order to configure the CiviCRM settings file:\n$filename";
+ $testDetails[2] .= ts("The user account used by your web-server %1 needs to be granted write access to the following directory in order to configure the CiviCRM settings file:", array(1 => $name)) . "\n$filename";
$this->error($testDetails);
}
}
$this->testing($testDetails);
if (!mysql_get_server_info()) {
- $testDetails[2] = 'Cannot determine the version of MySQL installed. Please ensure at least version 4.1 is installed.';
+ $testDetails[2] = ts('Cannot determine the version of MySQL installed. Please ensure at least version %1 is installed.', array(1 => $version));
$this->warning($testDetails);
}
else {
$this->testing($testDetails);
$conn = @mysql_connect($server, $username, $password);
if (!$conn) {
- $testDetails[2] .= ' Could not determine if mysql has innodb support. Assuming no';
+ $testDetails[2] .= ' ' . ts("Could not determine if MySQL has InnoDB support. Assuming no.");
$this->error($testDetails);
return;
}
}
}
if ($innodb_support) {
- $testDetails[3] = 'MySQL server does have innodb support';
+ $testDetails[3] = ts('MySQL server does have InnoDB support');
}
else {
- $testDetails[2] .= ' Could not determine if mysql has innodb support. Assuming no';
+ $testDetails[2] .= ' ' . ts('Could not determine if MySQL has InnoDB support. Assuming no');
}
}
$this->testing($testDetails);
$conn = @mysql_connect($server, $username, $password);
if (!$conn) {
- $testDetails[2] = 'Could not login to the database.';
+ $testDetails[2] = ts('Could not login to the database.');
$this->error($testDetails);
return;
}
if (!@mysql_select_db($database, $conn)) {
- $testDetails[2] = 'Could not select the database.';
+ $testDetails[2] = ts('Could not select the database.');
$this->error($testDetails);
return;
}
$result = mysql_query('CREATE TEMPORARY TABLE civicrm_install_temp_table_test (test text)', $conn);
if (!$result) {
- $testDetails[2] = 'Could not create a temp table.';
+ $testDetails[2] = ts('Could not create a temp table.');
$this->error($testDetails);
}
$result = mysql_query('DROP TEMPORARY TABLE civicrm_install_temp_table_test');
$this->testing($testDetails);
$conn = @mysql_connect($server, $username, $password);
if (!$conn) {
- $testDetails[2] = 'Could not login to the database.';
+ $testDetails[2] = ts('Could not login to the database.');
$this->error($testDetails);
return;
}
if (!@mysql_select_db($database, $conn)) {
- $testDetails[2] = 'Could not select the database.';
+ $testDetails[2] = ts('Could not select the database.');
$this->error($testDetails);
return;
}
$result = mysql_query('CREATE TABLE civicrm_install_temp_table_test (test text)', $conn);
if (!$result) {
- $testDetails[2] = 'Could not create a table.';
+ $testDetails[2] = ts('Could not create a table in the database.');
$this->error($testDetails);
}
$result = mysql_query('CREATE TRIGGER civicrm_install_temp_table_test_trigger BEFORE INSERT ON civicrm_install_temp_table_test FOR EACH ROW BEGIN END');
if (!$result) {
mysql_query('DROP TABLE civicrm_install_temp_table_test');
- $testDetails[2] = 'Could not create a trigger.';
+ $testDetails[2] = ts('Could not create a database trigger.');
$this->error($testDetails);
}
$this->testing($testDetails);
$conn = @mysql_connect($server, $username, $password);
if (!$conn) {
- $testDetails[2] = 'Could not login to the database.';
+ $testDetails[2] = ts('Could not connect to the database server.');
$this->error($testDetails);
return;
}
if (!@mysql_select_db($database, $conn)) {
- $testDetails[2] = 'Could not select the database.';
+ $testDetails[2] = ts('Could not select the database.');
$this->error($testDetails);
return;
}
$result = mysql_query('CREATE TEMPORARY TABLE civicrm_install_temp_table_test (test text)', $conn);
if (!$result) {
- $testDetails[2] = 'Could not create a table.';
+ $testDetails[2] = ts('Could not create a table in the database.');
$this->error($testDetails);
return;
}
$result = mysql_query('LOCK TABLES civicrm_install_temp_table_test WRITE', $conn);
if (!$result) {
- $testDetails[2] = 'Could not obtain a write lock for the table.';
+ $testDetails[2] = ts('Could not obtain a write lock for the database table.');
$this->error($testDetails);
$result = mysql_query('DROP TEMPORARY TABLE civicrm_install_temp_table_test');
return;
$result = mysql_query('UNLOCK TABLES', $conn);
if (!$result) {
- $testDetails[2] = 'Could not release the lock for the table.';
+ $testDetails[2] = ts('Could not release the lock for the database table.');
$this->error($testDetails);
$result = mysql_query('DROP TEMPORARY TABLE civicrm_install_temp_table_test');
return;
$this->testing($testDetails);
$conn = @mysql_connect($server, $username, $password);
if (!$conn) {
- $testDetails[2] = 'Could not connect to the database server.';
+ $testDetails[2] = ts('Could not connect to the database server.');
$this->error($testDetails);
return;
}
$result = mysql_query("SHOW variables like 'auto_increment_increment'", $conn);
if (!$result) {
- $testDetails[2] = 'Could not query database server variables.';
+ $testDetails[2] = ts('Could not query database server variables.');
$this->error($testDetails);
return;
}
else {
$values = mysql_fetch_row($result);
if ($values[1] == 1) {
- $testDetails[3] = 'MySQL server auto_increment_increment is 1';
+ $testDetails[3] = ts('MySQL server auto_increment_increment is 1');
}
else {
$this->error($testDetails);
$this->testing($testDetails);
$conn = @mysql_connect($server, $username, $password);
if (!$conn) {
- $testDetails[2] = 'Could not login to the database.';
+ $testDetails[2] = ts('Could not connect to the database server.');
$this->error($testDetails);
return;
}
if (!@mysql_select_db($database, $conn)) {
- $testDetails[2] = 'Could not select the database.';
+ $testDetails[2] = ts('Could not select the database.');
$this->error($testDetails);
return;
}
$result = mysql_query("SHOW VARIABLES LIKE 'thread_stack'", $conn); // bytes => kb
if (!$result) {
- $testDetails[2] = 'Could not query thread_stack.';
+ $testDetails[2] = ts('Could not get information about the thread_stack of the database.');
$this->error($testDetails);
}
else {
$values = mysql_fetch_row($result);
if ($values[1] < (1024 * $minValueKB)) {
- $testDetails[2] = 'MySQL "thread_stack" is ' . ($values[1] / 1024) . 'k';
+ $testDetails[2] = ts('MySQL "thread_stack" is %1 kb', array(1 => ($values[1] / 1024)));
$this->error($testDetails);
}
}
$okay = "Database '$database' exists";
}
elseif ($onlyRequire) {
- $testDetails[2] = "The database: '$database' does not exist";
+ $testDetails[2] = ts("The database: '%1' does not exist.", array(1 => $database));
$this->error($testDetails);
return;
}
else {
if (@mysql_query("CREATE DATABASE $database")) {
- $okay = "Able to create a new database";
+ $okay = ts("Able to create a new database.");
}
else {
- $testDetails[2] .= " (user '$username' doesn't have CREATE DATABASE permissions.)";
+ $testDetails[2] .= " (" . ts("user '%1' doesn't have CREATE DATABASE permissions.", array(1 => $username)) . ")";
$this->error($testDetails);
return;
}
return TRUE;
}
else {
- $testDetails[2] = " (the following PHP variables are missing: " . implode(", ", $missing) . ")";
+ $testDetails[2] = " (" . ts('the following PHP variables are missing: %1', array(1 => implode(", ", $missing))) . ")";
$this->error($testDetails);
}
}
$section = $testDetails[0];
$test = $testDetails[1];
- $message = "OK";
+ $message = ts("OK");
if (isset($testDetails[3])) {
$message .= " ($testDetails[3])";
}
if (@mysql_query("CREATE DATABASE $database")) {
}
else {
- $errorTitle = "Oops! Could not create Database $database";
- $errorMsg = "We encountered an error when attempting to create the database. Please check your mysql server permissions and the database name and try again.";
+ $errorTitle = ts("Oops! Could not create database %1", array(1 => $database));
+ $errorMsg = ts("We encountered an error when attempting to create the database. Please check your MySQL server permissions and the database name and try again.");
errorDisplayPage($errorTitle, $errorMsg);
}
}
global $installType, $installURLPath;
$registerSiteURL = "https://civicrm.org/register-site";
- $commonOutputMessage = "
- <li>Have you registered this site at CiviCRM.org? If not, please help strengthen the CiviCRM ecosystem by taking a few minutes to <a href='$registerSiteURL' target='_blank'>fill out the site registration form</a>. The information collected will help us prioritize improvements, target our communications and build the community. If you have a technical role for this site, be sure to check Keep in Touch to receive technical updates (a low volume mailing list).</li>
- <li>We have integrated KCFinder with CKEditor and TinyMCE. This allows a user to upload images. All uploaded images are public.</li>
-";
+ $commonOutputMessage
+ = "<li>" . ts("Have you registered this site at CiviCRM.org? If not, please help strengthen the CiviCRM ecosystem by taking a few minutes to <a %1>fill out the site registration form</a>. The information collected will help us prioritize improvements, target our communications and build the community. If you have a technical role for this site, be sure to check Keep in Touch to receive technical updates (a low volume mailing list).", array(1 => "href='$registerSiteURL' target='_blank'")) . "</li>"
+ . "<li>" . ts("We have integrated KCFinder with CKEditor and TinyMCE. This allows a user to upload images. All uploaded images are public.") . "</li>";
$output = NULL;
+
if (
$installType == 'drupal' &&
version_compare(VERSION, '7.0-rc1') >= 0
$output .= '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">';
$output .= '<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">';
$output .= '<head>';
- $output .= '<title>CiviCRM Installed</title>';
+ $output .= '<title>' . ts('CiviCRM Installed') . '</title>';
+ $output .= '<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />';
$output .= '<link rel="stylesheet" type="text/css" href="template.css" />';
$output .= '</head>';
$output .= '<body>';
- $output .= '<div style="padding: 1em;"><p class="good">CiviCRM has been successfully installed</p>';
+ $output .= '<div style="padding: 1em;"><p class="good">' . ts('CiviCRM has been successfully installed') . '</p>';
$output .= '<ul>';
- $docLinkConfig = CRM_Utils_System::docURL2('Configuring a New Site', FALSE, 'here', NULL, NULL, "wiki");
- if (!function_exists('ts')) {
- $docLinkConfig = "<a href=\"{$docLinkConfig}\">here</a>";
- }
+
$drupalURL = civicrm_cms_base();
$drupalPermissionsURL = "{$drupalURL}index.php?q=admin/people/permissions";
$drupalURL .= "index.php?q=civicrm/admin/configtask&reset=1";
- $output .= "<li>Drupal user permissions have been automatically set - giving anonymous and authenticated users access to public CiviCRM forms and features. We recommend that you <a target='_blank' href={$drupalPermissionsURL}>review these permissions</a> to ensure that they are appropriate for your requirements (<a target='_blank' href='http://wiki.civicrm.org/confluence/display/CRMDOC/Default+Permissions+and+Roles'>learn more...</a>)</li>
- <li>Use the <a target='_blank' href=\"$drupalURL\">Configuration Checklist</a> to review and configure settings for your new site</li>
- {$commonOutputMessage}";
+ $output .= "<li>" . ts("Drupal user permissions have been automatically set - giving anonymous and authenticated users access to public CiviCRM forms and features. We recommend that you <a %1>review these permissions</a> to ensure that they are appropriate for your requirements (<a %2>learn more...</a>)", array(1 => "target='_blank' href='{$drupalPermissionsURL}'", 2 => "target='_blank' href='http://wiki.civicrm.org/confluence/display/CRMDOC/Default+Permissions+and+Roles'")) . "</li>";
+ $output .= "<li>" . ts("Use the <a %1>Configuration Checklist</a> to review and configure settings for your new site", array(1 => "target='_blank' href='$drupalURL'")) . "</li>";
+ $output .= $commonOutputMessage;
// automatically enable CiviCRM module once it is installed successfully.
// so we need to Bootstrap Drupal, so that we can call drupal hooks.
// relative / abosolute paths are not working for drupal, hence using chdir()
chdir($cmsPath);
+ // Force the re-initialisation of the config singleton on the next call
+ // since so far, we had used the Config object without loading the DB.
+ $c = CRM_Core_Config::singleton(FALSE);
+ $c->free();
+
include_once "./includes/bootstrap.inc";
include_once "./includes/unicode.inc";
$GLOBALS['user'] = $original_user;
drupal_save_session(TRUE);
+ //change the default language to one chosen
+ if (isset($config['seedLanguage']) && $config['seedLanguage'] != 'en_US') {
+ // This ensures that defaults get set, otherwise the user will login
+ // and most configurations will be empty, not set to en_US defaults.
+ civicrm_api3('Setting', 'revert');
+
+ civicrm_api3('Setting', 'create', array(
+ 'domain_id' => 'current_domain',
+ 'lcMessages' => $config['seedLanguage'],
+ )
+ );
+ }
+
$output .= '</ul>';
$output .= '</div>';
$output .= '</body>';
$output .= '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">';
$output .= '<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">';
$output .= '<head>';
- $output .= '<title>CiviCRM Installed</title>';
+ $output .= '<title>' . ts('CiviCRM Installed') . '</title>';
+ $output .= '<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />';
$output .= '<link rel="stylesheet" type="text/css" href="template.css" />';
$output .= '</head>';
$output .= '<body>';
- $output .= '<div style="padding: 1em;"><p class="good">CiviCRM has been successfully installed</p>';
+ $output .= '<div style="padding: 1em;"><p class="good">' . ts("CiviCRM has been successfully installed") . '</p>';
$output .= '<ul>';
- $docLinkConfig = CRM_Utils_System::docURL2('Configuring a New Site', FALSE, 'here', NULL, NULL, "wiki");
- if (!function_exists('ts')) {
- $docLinkConfig = "<a href=\"{$docLinkConfig}\">here</a>";
- }
+
$drupalURL = civicrm_cms_base();
$drupalPermissionsURL = "{$drupalURL}index.php?q=admin/user/permissions";
$drupalURL .= "index.php?q=civicrm/admin/configtask&reset=1";
- $output .= "<li>Drupal user permissions have been automatically set - giving anonymous and authenticated users access to public CiviCRM forms and features. We recommend that you <a target='_blank' href={$drupalPermissionsURL}>review these permissions</a> to ensure that they are appropriate for your requirements (<a target='_blank' href='http://wiki.civicrm.org/confluence/display/CRMDOC/Default+Permissions+and+Roles'>learn more...</a>)</li>
- <li>Use the <a target='_blank' href=\"$drupalURL\">Configuration Checklist</a> to review and configure settings for your new site</li>
- {$commonOutputMessage}";
+ $output .= "<li>" . ts("Drupal user permissions have been automatically set - giving anonymous and authenticated users access to public CiviCRM forms and features. We recommend that you <a %1>review these permissions</a> to ensure that they are appropriate for your requirements (<a %2>learn more...</a>)", array(1 => "target='_blank' href='{$drupalPermissionsURL}'", 2 => "target='_blank' href='http://wiki.civicrm.org/confluence/display/CRMDOC/Default+Permissions+and+Roles'")) . "</li>";
+ $output .= "<li>" . ts("Use the <a %1>Configuration Checklist</a> to review and configure settings for your new site", array(1 => "target='_blank' href='$drupalURL'")) . "</li>";
+ $output .= $commonOutputMessage;
// explicitly setting error reporting, since we cannot handle drupal related notices
error_reporting(1);
// relative / abosolute paths are not working for drupal, hence using chdir()
chdir($cmsPath);
+ // Force the re-initialisation of the config singleton on the next call
+ // since so far, we had used the Config object without loading the DB.
+ $c = CRM_Core_Config::singleton(FALSE);
+ $c->free();
+
include_once "./includes/bootstrap.inc";
drupal_bootstrap(DRUPAL_BOOTSTRAP_FULL);
echo $output;
}
elseif ($installType == 'wordpress') {
- echo '<h1>CiviCRM Installed</h1>';
- echo '<div style="padding: 1em;"><p style="background-color: #0C0; border: 1px #070 solid; color: white;">CiviCRM has been successfully installed</p>';
+ echo '<h1>' . ts('CiviCRM Installed') . '</h1>';
+ echo '<div style="padding: 1em;"><p style="background-color: #0C0; border: 1px #070 solid; color: white;">' . ts("CiviCRM has been successfully installed") . '</p>';
echo '<ul>';
- $docLinkConfig = CRM_Utils_System::docURL2('Configuring a New Site', FALSE, 'here', NULL, NULL, "wiki");
- if (!function_exists('ts')) {
- $docLinkConfig = "<a href=\"{$docLinkConfig}\">here</a>";
- }
$cmsURL = civicrm_cms_base();
$cmsURL .= "wp-admin/admin.php?page=CiviCRM&q=civicrm/admin/configtask&reset=1";
$wpPermissionsURL = "wp-admin/admin.php?page=CiviCRM&q=civicrm/admin/access/wp-permissions&reset=1";
- $output .= "
- <li>WordPress user permissions have been automatically set - giving Anonymous and Subscribers access to public CiviCRM forms and features. We recommend that you <a target='_blank' href={$wpPermissionsURL}>review these permissions</a> to ensure that they are appropriate for your requirements (<a target='_blank' href='http://wiki.civicrm.org/confluence/display/CRMDOC/Default+Permissions+and+Roles'>learn more...</a>)</li>
- <li>Use the <a target='_blank' href=\"$cmsURL\">Configuration Checklist</a> to review and configure settings for your new site</li>
- {$commonOutputMessage}
-";
+ $output .= "<li>" . ts("WordPress user permissions have been automatically set - giving Anonymous and Subscribers access to public CiviCRM forms and features. We recommend that you <a %1>review these permissions</a> to ensure that they are appropriate for your requirements (<a %2>learn more...</a>)", array(1 => "target='_blank' href='{$wpPermissionsURL}'", 2 => "target='_blank' href='http://wiki.civicrm.org/confluence/display/CRMDOC/Default+Permissions+and+Roles'")) . "</li>";
+ $output .= "<li>" . ts("Use the <a %1>Configuration Checklist</a> to review and configure settings for your new site", array(1 => "target='_blank' href='$cmsURL'")) . "</li>";
+ $output .= $commonOutputMessage;
echo '</ul>';
echo '</div>';
+
+ $c = CRM_Core_Config::singleton(FALSE);
+ $c->free();
}
}
/**
* @param $errorTitle
* @param $errorMsg
+ * @param $showRefer
*/
-function errorDisplayPage($errorTitle, $errorMsg) {
+function errorDisplayPage($errorTitle, $errorMsg, $showRefer = TRUE) {
+ if ($showRefer) {
+ $docLink = CRM_Utils_System::docURL2('Installation and Upgrades', FALSE, 'Installation Guide', NULL, NULL, "wiki");
+
+ if (function_exists('ts')) {
+ $errorMsg .= '<p>' . ts("<a %1>Refer to the online documentation for more information</a>", array(1 => "href='$docLink'")) . '</p>';
+ }
+ else {
+ $errorMsg .= '<p>' . sprintf("<a %s>Refer to the online documentation for more information</a>", "href='$docLink'") . '</p>';
+ }
+ }
+
include 'error.html';
exit();
}