#!/usr/bin/env perl
# conf.pl
#
-# Copyright (c) 1999-2005 The SquirrelMail Project Team
+# Copyright (c) 1999-2007 The SquirrelMail Project Team
# Licensed under the GNU GPL. For full terms see COPYING.
#
# A simple configure script to configure SquirrelMail
#
# $Id$
############################################################
-$conf_pl_version = "1.4.0";
+$conf_pl_version = "1.5.0";
############################################################
# Check what directory we're supposed to be running in, and
# First, lets read in the data already in there...
############################################################
if ( -e "config.php" ) {
+ # Make sure that file is readable
+ if (! -r "config.php") {
+ clear_screen();
+ print "WARNING:\n";
+ print "The file \"config/config.php\" was found, but you don't\n";
+ print "have rights to read it.\n";
+ print "\n";
+ print "Press enter to continue";
+ $ctu = <STDIN>;
+ exit;
+ }
open( FILE, "config.php" );
while ( $line = <FILE> ) {
$line =~ s/^\s+//;
if ( $config_version ne $conf_pl_version ) {
clear_screen();
- print $WHT. "WARNING:\n" . $NRM;
+ print "WARNING:\n";
print " The file \"config/config.php\" was found, but it is for\n";
print " an older version of SquirrelMail. It is possible to still\n";
print " read the defaults from this file but be warned that many\n";
if ( $config_version ne $conf_pl_version ) {
clear_screen();
- print $WHT. "WARNING:\n" . $NRM;
+ print "WARNING:\n";
print " You are trying to use a 'config_default.php' from an older\n";
print " version of SquirrelMail. This is HIGHLY unrecommended. You\n";
print " should get the 'config_default.php' that matches the version\n";
print " of SquirrelMail that you are running. You can get this from\n";
print " the SquirrelMail web page by going to the following URL:\n";
- print " http://www.squirrelmail.org.\n";
+ print " http://squirrelmail.org.\n";
print "\n";
print "Continue loading with old config_default.php (a bad idea) [y/N]? ";
$ctu = <STDIN>;
$options[1] =~ s/\\'/'/g;
$options[1] =~ s/\\\\/\\/g;
- if ( $options[0] =~ /^theme\[[0-9]+\]\[['"]PATH['"]\]/ ) {
+ if ( $options[0] =~ /^user_themes\[[0-9]+\]\[['"]PATH['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]PATH['"]\]//;
+ $sub =~ s/.*\[//;
+ if ( -e "../css/" ) {
+ $options[1] =~ s/^\.\.\/config/\.\.\/css/;
+ }
+ $user_theme_path[$sub] = &change_to_rel_path($options[1]);
+ } elsif ( $options[0] =~ /^user_themes\[[0-9]+\]\[['"]NAME['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]NAME['"]\]//;
+ $sub =~ s/.*\[//;
+ $user_theme_name[$sub] = $options[1];
+ } elsif ( $options[0] =~ /^icon_themes\[[0-9]+\]\[['"]PATH['"]\]/ ) {
$sub = $options[0];
$sub =~ s/\]\[['"]PATH['"]\]//;
$sub =~ s/.*\[//;
- if ( -e "../themes" ) {
- $options[1] =~ s/^\.\.\/config/\.\.\/themes/;
+ if ( -e "../images/" ) {
+ $options[1] =~ s/^\.\.\/config/\.\.\/images/;
+ }
+ $icon_theme_path[$sub] = &change_to_rel_path($options[1]);
+ } elsif ( $options[0] =~ /^icon_themes\[[0-9]+\]\[['"]NAME['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]NAME['"]\]//;
+ $sub =~ s/.*\[//;
+ $icon_theme_name[$sub] = $options[1];
+ } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]ID['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]ID['"]\]//;
+ $sub =~ s/.*\[//;
+ if ( -e "../templates" ) {
+ $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
}
- $theme_path[$sub] = &change_to_rel_path($options[1]);
- } elsif ( $options[0] =~ /^theme\[[0-9]+\]\[['"]NAME['"]\]/ ) {
+ $templateset_id[$sub] = $options[1];
+##### FIXME: This section BELOW here so old prefs files don't blow up when running conf.pl
+##### Remove after a month or two
+} elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]PATH['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]PATH['"]\]//;
+ $sub =~ s/.*\[//;
+ if ( -e "../templates" ) {
+ $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
+ }
+ $templateset_id[$sub] = $options[1];
+##### FIXME: This section ABOVE here so old prefs files don't blow up when running conf.pl
+##### Remove after a month or two
+ } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]NAME['"]\]/ ) {
$sub = $options[0];
$sub =~ s/\]\[['"]NAME['"]\]//;
$sub =~ s/.*\[//;
- $theme_name[$sub] = $options[1];
+ $templateset_name[$sub] = $options[1];
} elsif ( $options[0] =~ /^plugins\[[0-9]*\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
} else {
$plugins[$sub] = $options[1];
}
+ } elsif ($options[0] =~ /^fontsets\[\'[a-z]*\'\]/) {
+ # parse associative $fontsets array
+ $sub = $options[0];
+ $sub =~ s/\'\]//;
+ $sub =~ s/^fontsets\[\'//;
+ $fontsets{$sub} = $options[1];
+ } elsif ( $options[0] =~ /^theme\[[0-9]+\]\[['"]PATH|NAME['"]\]/ ) {
+ ##
+ ## $color themes are no longer supported. Please leave this
+ ## so conf.pl doesn't barf if it encounters a $theme.
+ ##
} elsif ( $options[0] =~ /^ldap_server\[[0-9]+\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
$tmp =~ s/[\'\"]?,?\s*$//;
$tmp =~ s/[\'\"]?\);\s*$//;
$limit_scope = $tmp;
+ } elsif ( $tmp =~ /^\s*[\'\"]listing[\'\"]/i ) {
+ $tmp =~ s/^\s*[\'\"]listing[\'\"]\s*=>\s*[\'\"]?//i;
+ $tmp =~ s/[\'\"]?,?\s*$//;
+ $tmp =~ s/[\'\"]?\);\s*$//;
+ $listing = $tmp;
+ } elsif ( $tmp =~ /^\s*[\'\"]writeable[\'\"]/i ) {
+ $tmp =~ s/^\s*[\'\"]writeable[\'\"]\s*=>\s*[\'\"]?//i;
+ $tmp =~ s/[\'\"]?,?\s*$//;
+ $tmp =~ s/[\'\"]?\);\s*$//;
+ $writeable = $tmp;
+ } elsif ( $tmp =~ /^\s*[\'\"]search_tree[\'\"]/i ) {
+ $tmp =~ s/^\s*[\'\"]search_tree[\'\"]\s*=>\s*[\'\"]?//i;
+ $tmp =~ s/[\'\"]?,?\s*$//;
+ $tmp =~ s/[\'\"]?\);\s*$//;
+ $search_tree = $tmp;
+ } elsif ( $tmp =~ /^\s*[\'\"]starttls[\'\"]/i ) {
+ $tmp =~ s/^\s*[\'\"]starttls[\'\"]\s*=>\s*[\'\"]?//i;
+ $tmp =~ s/[\'\"]?,?\s*$//;
+ $tmp =~ s/[\'\"]?\);\s*$//;
+ $starttls = $tmp;
}
}
$ldap_host[$sub] = $host;
$ldap_bindpw[$sub] = $bindpw;
$ldap_protocol[$sub] = $protocol;
$ldap_limit_scope[$sub] = $limit_scope;
- } elsif ( $options[0] =~ /^(data_dir|attachment_dir|theme_css|org_logo|signout_page)$/ ) {
+ $ldap_listing[$sub] = $listing;
+ $ldap_writeable[$sub] = $writeable;
+ $ldap_search_tree[$sub] = $search_tree;
+ $ldap_starttls[$sub] = $starttls;
+ } elsif ( $options[0] =~ /^(data_dir|attachment_dir|org_logo|signout_page|icon_theme_def)$/ ) {
${ $options[0] } = &change_to_rel_path($options[1]);
} else {
${ $options[0] } = $options[1];
}
close FILE;
+# FIXME: unknown introduction date
$useSendmail = 'false' if ( lc($useSendmail) ne 'true' );
$sendmail_path = "/usr/sbin/sendmail" if ( !$sendmail_path );
$pop_before_smtp = 'false' if ( !$pop_before_smtp );
+$pop_before_smtp_host = '' if ( !$pop_before_smtp_host );
$default_unseen_notify = 2 if ( !$default_unseen_notify );
$default_unseen_type = 1 if ( !$default_unseen_type );
$config_use_color = 0 if ( !$config_use_color );
$optional_delimiter = "detect" if ( !$optional_delimiter );
$auto_create_special = 'false' if ( !$auto_create_special );
$default_use_priority = 'true' if ( !$default_use_priority );
-$hide_sm_attributions = 'false' if ( !$hide_sm_attributions );
$default_use_mdn = 'true' if ( !$default_use_mdn );
$delete_folder = 'false' if ( !$delete_folder );
$noselect_fix_enable = 'false' if ( !$noselect_fix_enable );
$frame_top = "_top" if ( !$frame_top );
$provider_uri = '' if ( !$provider_uri );
-$provider_name = '' if ( !$provider_name );
-$edit_identity = 'true' if ( !$edit_identity );
-$edit_name = 'true' if ( !$edit_name );
-$allow_thread_sort = 'false' if ( !$allow_thread_sort );
-$allow_server_sort = 'false' if ( !$allow_server_sort );
+$provider_name = '' if ( !$provider_name || $provider_name eq 'SquirrelMail');
$no_list_for_subscribe = 'false' if ( !$no_list_for_subscribe );
$allow_charset_search = 'true' if ( !$allow_charset_search );
$allow_advanced_search = 0 if ( !$allow_advanced_search) ;
$prefs_user_field = 'user' if ( !$prefs_user_field );
$prefs_key_field = 'prefkey' if ( !$prefs_key_field );
$prefs_val_field = 'prefval' if ( !$prefs_val_field );
+$session_name = 'SQMSESSID' if ( !$session_name );
+$skip_SM_header = 'false' if ( !$skip_SM_header );
+$default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
+
+# since 1.2.0
+$hide_sm_attributions = 'false' if ( !$hide_sm_attributions );
+# since 1.2.5
+$edit_identity = 'true' if ( !$edit_identity );
+$edit_name = 'true' if ( !$edit_name );
+
+# since 1.4.0
$use_smtp_tls= 'false' if ( !$use_smtp_tls);
$smtp_auth_mech = 'none' if ( !$smtp_auth_mech );
$use_imap_tls = 'false' if ( !$use_imap_tls );
$imap_auth_mech = 'login' if ( !$imap_auth_mech );
-$session_name = 'SQMSESSID' if ( !$session_name );
-$skip_SM_header = 'false' if ( !$skip_SM_header );
-$default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
+
# since 1.5.0
$show_alternative_names = 'false' if ( !$show_alternative_names );
-$available_languages = 'all' if ( !$available_languages );
+# $available_languages option available only in 1.5.0. removed due to $languages
+# implementation changes. options are provided by limit_languages plugin
+# $available_languages = 'all' if ( !$available_languages );
$aggressive_decoding = 'false' if ( !$aggressive_decoding );
-$advanced_tree = 'false' if ( !$advanced_tree );
+# available only in 1.5.0 and 1.5.1
+# $advanced_tree = 'false' if ( !$advanced_tree );
$use_php_recode = 'false' if ( !$use_php_recode );
$use_php_iconv = 'false' if ( !$use_php_iconv );
+
# since 1.5.1
$use_icons = 'false' if ( !$use_icons );
$use_iframe = 'false' if ( !$use_iframe );
$lossy_encoding = 'false' if ( !$lossy_encoding );
$allow_remote_configtest = 'false' if ( !$allow_remote_configtest );
+$secured_config = 'true' if ( !$secured_config );
+
+$sm_debug_mode = 'SM_DEBUG_MODE_MODERATE' if ( !$sm_debug_mode );
+#FIXME: When this is STABLE software, remove the line above and uncomment the one below:
+#$sm_debug_mode = 'SM_DEBUG_MODE_OFF' if ( !$sm_debug_mode );
+$sm_debug_mode = convert_debug_binary_integer_to_constants($sm_debug_mode);
+
$addrbook_global_table = 'global_abook' if ( !$addrbook_global_table );
$addrbook_global_writeable = 'false' if ( !$addrbook_global_writeable );
$addrbook_global_listing = 'false' if ( !$addrbook_global_listing );
$abook_global_file_listing = 'true' if ( !$abook_global_file_listing );
$encode_header_key = '' if ( !$encode_header_key );
$hide_auth_header = 'false' if ( !$hide_auth_header );
+$time_zone_type = '0' if ( !$time_zone_type );
+$prefs_user_size = 128 if ( !$prefs_user_size );
+$prefs_key_size = 64 if ( !$prefs_key_size );
+$prefs_val_size = 65536 if ( !$prefs_val_size );
+
+# add qmail-inject test here for backwards compatibility
+if ( !$sendmail_args && $sendmail_path =~ /qmail-inject/ ) {
+ $sendmail_args = '';
+} elsif ( !$sendmail_args ) {
+ $sendmail_args = '-i -t';
+}
+
+$default_fontsize = '' if ( !$default_fontsize);
+$default_fontset = '' if ( !$default_fontset);
+if ( !%fontsets) {
+ %fontsets = ('serif', 'serif',
+ 'sans', 'helvetica,arial,sans-serif',
+ 'comicsans', 'comic sans ms,sans-serif',
+ 'tahoma', 'tahoma,sans-serif',
+ 'verasans', 'bitstream vera sans,verdana,sans-serif');
+}
+
+# $use_imap_tls and $use_smtp_tls are switched to integer since 1.5.1
+$use_imap_tls = 0 if ( $use_imap_tls eq 'false');
+$use_imap_tls = 1 if ( $use_imap_tls eq 'true');
+$use_smtp_tls = 0 if ( $use_smtp_tls eq 'false');
+$use_smtp_tls = 1 if ( $use_smtp_tls eq 'true');
+# sorting options changed names and reversed values in 1.5.1
+$disable_thread_sort = 'false' if ( !$disable_thread_sort );
+$disable_server_sort = 'false' if ( !$disable_server_sort );
+
+# since 1.5.2
+$abook_file_line_length = 2048 if ( !$abook_file_line_length );
+$config_location_base = '' if ( !$config_location_base );
+$smtp_sitewide_user = '' if ( !$smtp_sitewide_user );
+$smtp_sitewide_pass = '' if ( !$smtp_sitewide_pass );
+$icon_theme_def = '' if ( !$icon_theme_def );
+$disable_plugins = 'false' if ( !$disable_plugins );
+$disable_plugins_user = '' if ( !$disable_plugins_user );
+$only_secure_cookies = 'true' if ( !$only_secure_cookies );
+$ask_user_info = 'true' if ( !$ask_user_info );
if ( $ARGV[0] eq '--install-plugin' ) {
print "Activating plugin " . $ARGV[1] . "\n";
- push @plugins, $ARGV[1];
- save_data();
- exit(0);
+ if ( -d "../plugins/" . $ARGV[1]) {
+ push @plugins, $ARGV[1];
+ save_data();
+ exit(0);
+ } else {
+ print "No such plugin.\n";
+ exit(1);
+ }
} elsif ( $ARGV[0] eq '--remove-plugin' ) {
print "Removing plugin " . $ARGV[1] . "\n";
foreach $plugin (@plugins) {
@plugins = @newplugins;
save_data();
exit(0);
+} elsif ( $ARGV[0] eq '--update-plugins' or $ARGV[0] eq '-u') {
+ build_plugin_hook_array();
+ exit(0);
+} elsif ( $ARGV[0] eq '--help' or $ARGV[0] eq '-h') {
+ print "SquirrelMail Configuration Script\n";
+ print "Usage:\n";
+ print " * No arguments: initiates the configuration dialog\n";
+ print " * --install-plugin <plugin> : activates the specified plugin\n";
+ print " * --remove-plugin <plugin> : deactivates the specified plugin\n";
+ print " * --update-plugins , -u : rebuilds plugin_hooks.php according\n";
+ print " to plugins activated in config.php\n";
+ print " * --help , -h : Displays this help\n";
+ print "\n";
+ exit(0);
}
+
+
+####################################################################################
+
+# used in multiple places, define once
+$list_supported_imap_servers =
+ " bincimap = Binc IMAP server\n" .
+ " courier = Courier IMAP server\n" .
+ " cyrus = Cyrus IMAP server\n" .
+ " dovecot = Dovecot Secure IMAP server\n" .
+ " exchange = Microsoft Exchange IMAP server\n" .
+ " hmailserver = hMailServer\n" .
+ " macosx = Mac OS X Mailserver\n" .
+ " mercury32 = Mercury/32\n" .
+ " uw = University of Washington's IMAP server\n";
+
#####################################################################################
if ( $config_use_color == 1 ) {
$WHT = "\x1B[37;1m";
$config_use_color = 2;
}
+# lists can be printed in more than one column; default is just one
+#
+$columns = 1;
+
+# try to get screen width dynamically if possible; default to 80
+# (user can override with "w#" command)
+#
+eval { require "sys/ioctl.ph" };
+if ($@
+ || !defined &TIOCGWINSZ
+ || !open(TTY, "+</dev/tty")
+ || !ioctl(TTY, &TIOCGWINSZ, $winsize='')) {
+ $screen_width = 80;
+} else {
+ ($row, $col, $xpixel, $ypixel) = unpack('S4', $winsize);
+ $screen_width = $col;
+}
+
while ( ( $command ne "q" ) && ( $command ne "Q" ) && ( $command ne ":q" ) ) {
clear_screen();
print $WHT. "SquirrelMail Configuration : " . $NRM;
print "2. Server Settings\n";
print "3. Folder Defaults\n";
print "4. General Options\n";
- print "5. Themes\n";
+ print "5. User Interface\n";
print "6. Address Books\n";
print "7. Message of the Day (MOTD)\n";
print "8. Plugins\n";
print "5. Signout Page : $WHT$signout_page$NRM\n";
print "6. Top Frame : $WHT$frame_top$NRM\n";
print "7. Provider link : $WHT$provider_uri$NRM\n";
- print "8. Provider name : $WHT$provider_name$NRM\n";
+ print "8. Provider link text : $WHT$provider_name$NRM\n";
print "\n";
print "R Return to Main Menu\n";
print "4. IMAP Server : $WHT$imapServerAddress$NRM\n";
print "5. IMAP Port : $WHT$imapPort$NRM\n";
print "6. Authentication type : $WHT$imap_auth_mech$NRM\n";
- print "7. Secure IMAP (TLS) : $WHT$use_imap_tls$NRM\n";
+ print "7. Secure IMAP (TLS) : $WHT" . display_use_tls($use_imap_tls) . "$NRM\n";
print "8. Server software : $WHT$imap_server_type$NRM\n";
print "9. Delimiter : $WHT$optional_delimiter$NRM\n";
print "\n";
if ( lc($useSendmail) eq 'true' ) {
print $WHT . "Sendmail" . $NRM . "\n--------\n";
print "4. Sendmail Path : $WHT$sendmail_path$NRM\n";
- print "5. Header encryption key : $WHT$encode_header_key$NRM\n";
+ print "5. Sendmail arguments : $WHT$sendmail_args$NRM\n";
+ print "6. Header encryption key : $WHT$encode_header_key$NRM\n";
print "\n";
} else {
print $WHT . "SMTP Settings" . $NRM . "\n-------------\n";
print "4. SMTP Server : $WHT$smtpServerAddress$NRM\n";
print "5. SMTP Port : $WHT$smtpPort$NRM\n";
print "6. POP before SMTP : $WHT$pop_before_smtp$NRM\n";
- print "7. SMTP Authentication : $WHT$smtp_auth_mech$NRM\n";
- print "8. Secure SMTP (TLS) : $WHT$use_smtp_tls$NRM\n";
+ print "7. SMTP Authentication : $WHT$smtp_auth_mech" . display_smtp_sitewide_userpass() ."$NRM\n";
+ print "8. Secure SMTP (TLS) : $WHT" . display_use_tls($use_smtp_tls) . "$NRM\n";
print "9. Header encryption key : $WHT$encode_header_key$NRM\n";
print "\n";
}
print "R Return to Main Menu\n";
} elsif ( $menu == 3 ) {
print $WHT. "Folder Defaults\n" . $NRM;
- print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
- print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
- print "3. Trash Folder : $WHT$trash_folder$NRM\n";
- print "4. Sent Folder : $WHT$sent_folder$NRM\n";
- print "5. Drafts Folder : $WHT$draft_folder$NRM\n";
- print "6. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
- print "7. By default, move to sent : $WHT$default_move_to_sent$NRM\n";
- print "8. By default, save as draft : $WHT$default_save_as_draft$NRM\n";
- print "9. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
- print "10. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
- print "11. Auto Expunge : $WHT$auto_expunge$NRM\n";
- print "12. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
- print "13. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
- print "14. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
- print "15. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
- print "16. Auto Create Special Folders : $WHT$auto_create_special$NRM\n";
- print "17. Folder Delete Bypasses Trash : $WHT$delete_folder$NRM\n";
- print "18. Enable /NoSelect folder fix : $WHT$noselect_fix_enable$NRM\n";
+ print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
+ print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
+ print "3. Trash Folder : $WHT$trash_folder$NRM\n";
+ print "4. Sent Folder : $WHT$sent_folder$NRM\n";
+ print "5. Drafts Folder : $WHT$draft_folder$NRM\n";
+ print "6. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
+ print "7. By default, save sent messages : $WHT$default_move_to_sent$NRM\n";
+ print "8. By default, save as draft : $WHT$default_save_as_draft$NRM\n";
+ print "9. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
+ print "10. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
+ print "11. Auto Expunge : $WHT$auto_expunge$NRM\n";
+ print "12. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
+ print "13. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
+ print "14. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
+ print "15. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
+ print "16. Auto Create Special Folders : $WHT$auto_create_special$NRM\n";
+ print "17. Folder Delete Bypasses Trash : $WHT$delete_folder$NRM\n";
+ print "18. Enable /NoSelect folder fix : $WHT$noselect_fix_enable$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 4 ) {
print $WHT. "General Options\n" . $NRM;
- print "1. Data Directory : $WHT$data_dir$NRM\n";
- print "2. Attachment Directory : $WHT$attachment_dir$NRM\n";
- print "3. Directory Hash Level : $WHT$dir_hash_level$NRM\n";
- print "4. Default Left Size : $WHT$default_left_size$NRM\n";
- print "5. Usernames in Lowercase : $WHT$force_username_lowercase$NRM\n";
- print "6. Allow use of priority : $WHT$default_use_priority$NRM\n";
- print "7. Hide SM attributions : $WHT$hide_sm_attributions$NRM\n";
- print "8. Allow use of receipts : $WHT$default_use_mdn$NRM\n";
- print "9. Allow editing of identity : $WHT$edit_identity$NRM\n";
- print " Allow editing of name : $WHT$edit_name$NRM\n";
- print " Remove username from header : $WHT$hide_auth_header$NRM\n";
- print "10. Allow server thread sort : $WHT$allow_thread_sort$NRM\n";
- print "11. Allow server-side sorting : $WHT$allow_server_sort$NRM\n";
- print "12. Allow server charset search : $WHT$allow_charset_search$NRM\n";
- print "13. Allow advanced search : $WHT$allow_advanced_search$NRM\n";
- print "14. PHP session name : $WHT$session_name$NRM\n";
+ print "1. Data Directory : $WHT$data_dir$NRM\n";
+ print "2. Attachment Directory : $WHT$attachment_dir$NRM\n";
+ print "3. Directory Hash Level : $WHT$dir_hash_level$NRM\n";
+ print "4. Default Left Size : $WHT$default_left_size$NRM\n";
+ print "5. Usernames in Lowercase : $WHT$force_username_lowercase$NRM\n";
+ print "6. Allow use of priority : $WHT$default_use_priority$NRM\n";
+ print "7. Hide SM attributions : $WHT$hide_sm_attributions$NRM\n";
+ print "8. Allow use of receipts : $WHT$default_use_mdn$NRM\n";
+ print "9. Allow editing of identity : $WHT$edit_identity$NRM\n";
+ print " Allow editing of name : $WHT$edit_name$NRM\n";
+ print " Remove username from header : $WHT$hide_auth_header$NRM\n";
+ print "10. Disable server thread sort : $WHT$disable_thread_sort$NRM\n";
+ print "11. Disable server-side sorting : $WHT$disable_server_sort$NRM\n";
+ print "12. Allow server charset search : $WHT$allow_charset_search$NRM\n";
+ print "13. Allow advanced search : $WHT$allow_advanced_search$NRM\n";
+ print "14. PHP session name : $WHT$session_name$NRM\n";
+ print "15. Time zone configuration : $WHT$time_zone_type$NRM\n";
+ print "16. Location base : $WHT$config_location_base$NRM\n";
+ print "17. Only secure cookies if poss. : $WHT$only_secure_cookies$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 5 ) {
- print $WHT. "Themes\n" . $NRM;
- print "1. Change Themes\n";
- for ( $count = 0 ; $count <= $#theme_name/2 ; $count++ ) {
- $temp_name = $theme_name[$count*2];
- printf " %s%*s %s\n", $temp_name,
- 40 - length($temp_name), " ",
- $theme_name[($count*2)+1];
- }
- print "2. CSS File : $WHT$theme_css$NRM\n";
+ print $WHT. "User Interface\n" . $NRM;
+ print "1. Use Icons? : $WHT$use_icons$NRM\n";
+# print "3. Default Icon Set : $WHT$icon_theme_def$NRM\n";
+ print "2. Default font size : $WHT$default_fontsize$NRM\n";
+ print "3. Manage template sets (skins)\n";
+ print "4. Manage user themes\n";
+ print "5. Manage font sets\n";
+ print "6. Manage icon themes\n";
+
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 6 ) {
print " > $ldap_host[$count]\n";
}
print "2. Use Javascript address book search : $WHT$default_use_javascript_addr_book$NRM\n";
- print "3. Use global file address book : $WHT$abook_global_file$NRM\n";
+ print "3. Global address book file : $WHT$abook_global_file$NRM\n";
print "4. Allow writing into global file address book : $WHT$abook_global_file_writeable$NRM\n";
print "5. Allow listing of global file address book : $WHT$abook_global_file_listing$NRM\n";
+ print "6. Allowed address book line length : $WHT$abook_file_line_length$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 7 ) {
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 8 ) {
- print $WHT. "Plugins\n" . $NRM;
+ if (lc($disable_plugins) eq 'true' && $disable_plugins_user ne '') {
+ print $WHT. "Plugins (WARNING: All plugins are currently disabled\n for the user \"$disable_plugins_user\"!)\n" . $NRM;
+ } elsif (lc($disable_plugins) eq 'true') {
+ print $WHT. "Plugins (WARNING: All plugins are currently disabled!)\n" . $NRM;
+ } else {
+ print $WHT. "Plugins\n" . $NRM;
+ }
print " Installed Plugins\n";
- $num = 0;
- for ( $count = 0 ; $count <= $#plugins ; $count++ ) {
- $num = $count + 1;
- print " $num. $plugins[$count]\n";
+ if ($columns > 1) {
+ $num = print_multi_col_list(1, $columns, $screen_width, 1, @plugins);
+ } else {
+ $num = 0;
+ for ( $count = 0 ; $count <= $#plugins ; $count++ ) {
+ $num = $count + 1;
+ $english_name = get_plugin_english_name($plugins[$count]);
+ if ( $english_name eq "" ) {
+ print " $WHT$num.$NRM $plugins[$count]" . get_plugin_version($plugins[$count]) . "\n";
+ } else {
+ print " $WHT$num.$NRM $english_name ($plugins[$count])" . get_plugin_version($plugins[$count]) . "\n";
+ }
+ }
}
print "\n Available Plugins:\n";
opendir( DIR, "../plugins" );
- @files = readdir(DIR);
+ @files = sort(readdir(DIR));
$pos = 0;
@unused_plugins = ();
for ( $i = 0 ; $i <= $#files ; $i++ ) {
- if ( -d "../plugins/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
+ if ( -d "../plugins/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne ".svn" ) {
$match = 0;
for ( $k = 0 ; $k <= $#plugins ; $k++ ) {
if ( $plugins[$k] eq $files[$i] ) {
}
}
- for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
- $num = $num + 1;
- print " $num. $unused_plugins[$i]\n";
+ if ($columns > 1) {
+ $num = print_multi_col_list($num + 1, $columns, $screen_width, 1, @unused_plugins);
+ } else {
+ for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
+ $num = $num + 1;
+ $english_name = get_plugin_english_name($unused_plugins[$i]);
+ if ( $english_name eq "" ) {
+ print " $WHT$num.$NRM $unused_plugins[$i]" . get_plugin_version($unused_plugins[$i]) . "\n";
+ } else {
+ print " $WHT$num.$NRM $english_name ($unused_plugins[$i])" . get_plugin_version($unused_plugins[$i]) . "\n";
+ }
+ }
}
closedir DIR;
print "\n";
+ if (lc($disable_plugins) eq 'true' && $disable_plugins_user ne '') {
+ print "E Enable active plugins (all plugins currently\n disabled for the user \"$disable_plugins_user\")\n";
+ } elsif (lc($disable_plugins) eq 'true') {
+ print "E Enable active plugins (all plugins currently\n disabled)\n";
+ } else {
+ print "D Disable all plugins\n";
+ }
+ print "U Set the user for whom plugins can be disabled\n";
print "R Return to Main Menu\n";
+ print "C# List plugins in <#> number of columns\n";
+ print "W# Change screen width to <#> (currently $screen_width)\n";
} elsif ( $menu == 9 ) {
print $WHT. "Database\n" . $NRM;
print "1. DSN for Address Book : $WHT$addrbook_dsn$NRM\n";
print "\n";
print "3. DSN for Preferences : $WHT$prefs_dsn$NRM\n";
print "4. Table for Preferences : $WHT$prefs_table$NRM\n";
- print "5. Field for username : $WHT$prefs_user_field$NRM\n";
- print "6. Field for prefs key : $WHT$prefs_key_field$NRM\n";
- print "7. Field for prefs value : $WHT$prefs_val_field$NRM\n";
+ print "5. Field for username : $WHT$prefs_user_field$NRM ($prefs_user_size)\n";
+ print "6. Field for prefs key : $WHT$prefs_key_field$NRM ($prefs_key_size)\n";
+ print "7. Field for prefs value : $WHT$prefs_val_field$NRM ($prefs_val_size)\n";
print "\n";
print "8. DSN for Global Address Book : $WHT$addrbook_global_dsn$NRM\n";
print "9. Table for Global Address Book : $WHT$addrbook_global_table$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 10 ) {
- print $WHT. "Language settings\n" . $NRM;
- print "1. Default Language : $WHT$squirrelmail_default_language$NRM\n";
- print "2. Default Charset : $WHT$default_charset$NRM\n";
- print "3. Show alternative language names : $WHT$show_alternative_names$NRM\n";
- print "4. Available languages : $WHT$available_languages$NRM\n";
- print "5. Enable aggressive decoding : $WHT$aggressive_decoding$NRM\n";
- print "6. Enable lossy encoding : $WHT$lossy_encoding$NRM\n";
- print "\n";
+ print $WHT. "Language settings\n" . $NRM;
+ print "1. Default Language : $WHT$squirrelmail_default_language$NRM\n";
+ print "2. Default Charset : $WHT$default_charset$NRM\n";
+ print "3. Show alternative language names : $WHT$show_alternative_names$NRM\n";
+ print "4. Enable aggressive decoding : $WHT$aggressive_decoding$NRM\n";
+ print "5. Enable lossy encoding : $WHT$lossy_encoding$NRM\n";
+ print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 11 ) {
- print $WHT. "Interface tweaks\n" . $NRM;
- print "1. Advanced tree : $WHT$advanced_tree$NRM\n";
- print "2. Display html mails in iframe : $WHT$use_iframe$NRM\n";
- print "3. Use Icons : $WHT$use_icons$NRM\n";
- print "\n";
- print $WHT. "PHP tweaks\n" . $NRM;
- print "4. Use php recode functions : $WHT$use_php_recode$NRM\n";
- print "5. Use php iconv functions : $WHT$use_php_iconv$NRM\n";
- print "\n";
- print $WHT. "Configuration tweaks\n" . $NRM;
- print "6. Allow remote configtest : $WHT$allow_remote_configtest$NRM\n";
- print "\n";
+ print $WHT. "Interface tweaks\n" . $NRM;
+ print "1. Display html mails in iframe : $WHT$use_iframe$NRM\n";
+ print "2. Ask user info on first login : $WHT$ask_user_info$NRM\n";
+ print "\n";
+ print $WHT. "PHP tweaks\n" . $NRM;
+ print "4. Use php recode functions : $WHT$use_php_recode$NRM\n";
+ print "5. Use php iconv functions : $WHT$use_php_iconv$NRM\n";
+ print "\n";
+ print $WHT. "Configuration tweaks\n" . $NRM;
+ print "6. Allow remote configtest : $WHT$allow_remote_configtest$NRM\n";
+ print "7. Debug mode : $WHT$sm_debug_mode$NRM\n";
+ print "8. Secured configuration mode : $WHT$secured_config$NRM\n";
+ print "\n";
print "R Return to Main Menu\n";
}
if ( $config_use_color == 1 ) {
$WHT = "\x1B[37;1m";
$NRM = "\x1B[0m";
}
+ } elsif ( $command =~ /^w([0-9]+)/ ) {
+ $screen_width = $1;
} elsif ( $command eq "d" && $menu == 0 ) {
set_defaults();
} else {
if ( $command == 4 ) { $imapServerAddress = command12(); }
elsif ( $command == 5 ) { $imapPort = command13(); }
elsif ( $command == 6 ) { $imap_auth_mech = command112a(); }
- elsif ( $command == 7 ) { $use_imap_tls = command113("IMAP",$use_imap_tls); }
+ elsif ( $command == 7 ) { $use_imap_tls = command_use_tls("IMAP",$use_imap_tls); }
elsif ( $command == 8 ) { $imap_server_type = command19(); }
elsif ( $command == 9 ) { $optional_delimiter = command111(); }
} elsif ( $show_smtp_settings && lc($useSendmail) eq 'true' ) {
if ( $command == 4 ) { $sendmail_path = command15(); }
- elsif ( $command == 5 ) { $encode_header_key = command114(); }
+ elsif ( $command == 5 ) { $sendmail_args = command_sendmail_args(); }
+ elsif ( $command == 6 ) { $encode_header_key = command114(); }
} elsif ( $show_smtp_settings ) {
if ( $command == 4 ) { $smtpServerAddress = command16(); }
elsif ( $command == 5 ) { $smtpPort = command17(); }
elsif ( $command == 6 ) { $pop_before_smtp = command18a(); }
elsif ( $command == 7 ) { $smtp_auth_mech = command112b(); }
- elsif ( $command == 8 ) { $use_smtp_tls = command113("SMTP",$use_smtp_tls); }
+ elsif ( $command == 8 ) { $use_smtp_tls = command_use_tls("SMTP",$use_smtp_tls); }
elsif ( $command == 9 ) { $encode_header_key = command114(); }
}
} elsif ( $menu == 3 ) {
elsif ( $command == 6 ) { $default_use_priority = command37(); }
elsif ( $command == 7 ) { $hide_sm_attributions = command38(); }
elsif ( $command == 8 ) { $default_use_mdn = command39(); }
- elsif ( $command == 9 ) { $edit_identity = command310(); }
- elsif ( $command == 10 ) { $allow_thread_sort = command312(); }
- elsif ( $command == 11 ) { $allow_server_sort = command313(); }
+ elsif ( $command == 9 ) { $edit_identity = command310(); }
+ elsif ( $command == 10 ) { $disable_thread_sort = command312(); }
+ elsif ( $command == 11 ) { $disable_server_sort = command313(); }
elsif ( $command == 12 ) { $allow_charset_search = command314(); }
elsif ( $command == 13 ) { $allow_advanced_search = command316(); }
elsif ( $command == 14 ) { $session_name = command317(); }
+ elsif ( $command == 15 ) { $time_zone_type = command318(); }
+ elsif ( $command == 16 ) { $config_location_base = command_config_location_base(); }
+ elsif ( $command == 17 ) { $only_secure_cookies = command319(); }
} elsif ( $menu == 5 ) {
- if ( $command == 1 ) { command41(); }
- elsif ( $command == 2 ) { $theme_css = command42(); }
+ if ( $command == 1 ) { $use_icons = commandB3(); }
+# elsif ( $command == 3 ) { $icon_theme_def = commandB7(); }
+ elsif ( $command == 2 ) { $default_fontsize = command_default_fontsize(); }
+ elsif ( $command == 3 ) { $templateset_default = command_templates(); }
+ elsif ( $command == 4 ) { command_userThemes(); }
+ elsif ( $command == 5 ) { command_fontsets(); }
+ elsif ( $command == 6 ) { command_iconSets(); }
} elsif ( $menu == 6 ) {
if ( $command == 1 ) { command61(); }
elsif ( $command == 2 ) { command62(); }
elsif ( $command == 3 ) { $abook_global_file=command63(); }
elsif ( $command == 4 ) { command64(); }
elsif ( $command == 5 ) { command65(); }
+ elsif ( $command == 6 ) { command_abook_file_line_length(); }
} elsif ( $menu == 7 ) {
if ( $command == 1 ) { $motd = command71(); }
} elsif ( $menu == 8 ) {
- if ( $command =~ /^[0-9]+/ ) { @plugins = command81(); }
+ if ( $command =~ /^[0-9]+/ ) { @plugins = command81(); }
+ elsif ( $command eq "u" ) { $disable_plugins_user = command82(); }
+ elsif ( $command eq "d" ) { $disable_plugins = 'true'; }
+ elsif ( $command eq "e" ) { $disable_plugins = 'false'; }
+ elsif ( $command =~ /^c([0-9]+)/ ) { $columns = $1; }
} elsif ( $menu == 9 ) {
if ( $command == 1 ) { $addrbook_dsn = command91(); }
elsif ( $command == 2 ) { $addrbook_table = command92(); }
elsif ( $command == 11 ) { $addrbook_global_listing = command911(); }
} elsif ( $menu == 10 ) {
if ( $command == 1 ) { $squirrelmail_default_language = commandA1(); }
- elsif ( $command == 2 ) { $default_charset = commandA2(); }
+ elsif ( $command == 2 ) { $default_charset = commandA2(); }
elsif ( $command == 3 ) { $show_alternative_names = commandA3(); }
- elsif ( $command == 4 ) { $available_languages = commandA4(); }
- elsif ( $command == 5 ) { $aggressive_decoding = commandA5(); }
- elsif ( $command == 6 ) { $lossy_encoding = commandA6(); }
+ elsif ( $command == 4 ) { $aggressive_decoding = commandA4(); }
+ elsif ( $command == 5 ) { $lossy_encoding = commandA5(); }
} elsif ( $menu == 11 ) {
- if ( $command == 1 ) { $advanced_tree = commandB1(); }
- if ( $command == 2 ) { $use_iframe = commandB2(); }
- elsif ( $command == 3 ) { $use_icons = commandB3(); }
+ if ( $command == 1 ) { $use_iframe = commandB2(); }
+ elsif ( $command == 2 ) { $ask_user_info = command_ask_user_info(); }
elsif ( $command == 4 ) { $use_php_recode = commandB4(); }
elsif ( $command == 5 ) { $use_php_iconv = commandB5(); }
elsif ( $command == 6 ) { $allow_remote_configtest = commandB6(); }
+ elsif ( $command == 7 ) { $sm_debug_mode = commandB8(); }
+ elsif ( $command == 8 ) { $secured_config = commandB9(); }
}
}
}
print " to use the default logo, use ../images/sm_logo.png\n";
print " - To specify a logo defined outside the SquirrelMail source tree\n";
print " use the absolute URL the webserver would use to include the file\n";
- print " e.g. http://www.example.com/images/mylogo.gif or /images/mylogo.jpg\n";
+ print " e.g. http://example.com/images/mylogo.gif or /images/mylogo.jpg\n";
print "\n";
print "[$WHT$org_logo$NRM]: $WHT";
$new_org_logo = <STDIN>;
print "If your Organization Title includes a '\$', please precede it with a \\. \n";
print "Other '\$' will be considered the beginning of a variable that\n";
print "must be defined before the \$org_title is printed.\n";
- print "\$version, for example can be used, and will print the\n";
- print "string representing the current SquirrelMail version.\n";
print "\n";
print "[$WHT$org_title$NRM]: $WHT";
$new_org_title = <STDIN>;
# Default link to provider
sub command7 {
- print "Here you can set the link on the right of the page.\n";
- print "If empty, it will link to the SquirrelMail About page.\n";
+ print "Here you can set the link on the top-right of the message list.\n";
+ print "If empty, it will not be displayed.\n";
print "\n";
print "[$WHT$provider_uri$NRM]: $WHT";
$new_provider_uri = <STDIN>;
}
sub command8 {
- print "Here you can set the name of the link on the right of the page.\n";
- print "The default is 'SquirrelMail/'\n";
+ print "Here you can set the name of the link on the top-right of the message list.\n";
+ print "The default is empty (do not display anything).'\n";
print "\n";
print "[$WHT$provider_name$NRM]: $WHT";
$new_provider_name = <STDIN>;
if ( $new_provider_name eq "\n" ) {
- $new_provider_name = 'SquirrelMail';
+ $new_provider_name = '';
} else {
$new_provider_name =~ s/[\r\n]//g;
$new_provider_name =~ s/^\s+$//g;
+ $new_provider_name =~ s/\'/\\'/g;
}
return $new_provider_name;
}
if ( $new_domain eq "\n" ) {
$new_domain = $domain;
} else {
- $new_domain =~ s/[\r\n]//g;
+ $new_domain =~ s/\s//g;
}
return $new_domain;
}
# sendmail_path
sub command15 {
- if ( $sendmail_path[0] !~ /./ ) {
- $sendmail_path = "/usr/sbin/sendmail";
- }
print "Specify where the sendmail executable is located. Usually /usr/sbin/sendmail\n";
print "[$WHT$sendmail_path$NRM]: $WHT";
$new_sendmail_path = <STDIN>;
return $new_sendmail_path;
}
+# Extra sendmail arguments
+sub command_sendmail_args {
+ print "Specify additional sendmail program arguments.\n";
+ print "\n";
+ print "Make sure that arguments are supported by your sendmail program. -f argument \n";
+ print "is added automatically by SquirrelMail scripts. Variable defaults to standard\n";
+ print "/usr/sbin/sendmail arguments. If you use qmail-inject, nbsmtp or any other \n";
+ print "sendmail wrapper, which does not support -i and -t arguments, set variable to\n";
+ print "empty string or use arguments suitable for your mailer.\n";
+ print "\n";
+ print "[$WHT$sendmail_args$NRM]: $WHT";
+ $new_sendmail_args = <STDIN>;
+ if ( $new_sendmail_args eq "\n" ) {
+ $new_sendmail_args = $sendmail_args;
+ } else {
+ # strip linefeeds and crs.
+ $new_sendmail_args =~ s/[\r\n]//g;
+ }
+ return trim($new_sendmail_args);
+}
+
# smtpServerAddress
sub command16 {
print "This is the hostname of your SMTP server.\n";
return $new_smtpPort;
}
-# authenticated server
-sub command18 {
- return;
- # This sub disabled by tassium - it has been replaced with smtp_auth_mech
- print "Do you wish to use an authenticated SMTP server? Your server must\n";
- print "support this in order for SquirrelMail to work with it. We implemented\n";
- print "it according to RFC 2554.\n";
-
- $YesNo = 'n';
- $YesNo = 'y' if ( lc($use_authenticated_smtp) eq 'true' );
-
- print "Use authenticated SMTP server (y/n) [$WHT$YesNo$NRM]: $WHT";
-
- $new_use_authenticated_smtp = <STDIN>;
- $new_use_authenticated_smtp =~ tr/yn//cd;
- return 'true' if ( $new_use_authenticated_smtp eq "y" );
- return 'false' if ( $new_use_authenticated_smtp eq "n" );
- return $use_authenticated_smtp;
-}
-
# pop before SMTP
sub command18a {
print "Do you wish to use POP3 before SMTP? Your server must\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($pop_before_smtp) eq 'true' );
- print "Use pop before SMTP (y/n) [$WHT$YesNo$NRM]: $WHT";
+ print "Use POP before SMTP (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_pop_before_smtp = <STDIN>;
$new_pop_before_smtp =~ tr/yn//cd;
- return 'true' if ( $new_pop_before_smtp eq "y" );
- return 'false' if ( $new_pop_before_smtp eq "n" );
- return $pop_before_smtp;
+ if ( $new_pop_before_smtp eq "y" ) {
+ $new_pop_before_smtp = "true";
+ } elsif ( $new_pop_before_smtp eq "n" ) {
+ $new_pop_before_smtp = "false";
+ } else {
+ $new_pop_before_smtp = $pop_before_smtp;
+ }
+
+ # if using POP before SMTP, allow setting of custom POP server address
+ if ($new_pop_before_smtp eq "true") {
+ print "$NRM\nIf the address of the POP server is not the same as\n";
+ print "your SMTP server, you may specify it here. Leave blank (to\n";
+ print "clear this, enter only spaces) to use the same address as\n";
+ print "your SMTP server.\n";
+ print "POP before SMTP server address [$WHT$pop_before_smtp_host$NRM]: $WHT";
+
+ $new_pop_before_smtp_host = <STDIN>;
+ if ( $new_pop_before_smtp_host eq "\n" ) {
+ $new_pop_before_smtp_host = $pop_before_smtp_host;
+ } elsif ($new_pop_before_smtp_host =~ /^\s+$/) {
+ $new_pop_before_smtp_host = '';
+ } else {
+ $new_pop_before_smtp_host =~ s/[\r|\n]//g;
+ }
+ $pop_before_smtp_host = $new_pop_before_smtp_host;
+ }
+
+ return $new_pop_before_smtp;
}
# imap_server_type
print "these servers. If you would like to use them, please select your\n";
print "IMAP server. If you do not wish to use these work-arounds, you can\n";
print "set this to \"other\", and none will be used.\n";
- print " courier = Courier IMAP server\n";
- print " cyrus = Cyrus IMAP server\n";
- print " dovecot = Dovecot Secure IMAP server\n";
- print " exchange = Microsoft Exchange IMAP server\n";
- print " hmailserver = hMailServer\n";
- print " macosx = Mac OS X Mailserver\n";
- print " mercury32 = Mercury Mail Transport System\n";
- print " uw = University of Washington's IMAP server\n";
+ print $list_supported_imap_servers;
print "\n";
print " other = Not one of the above servers\n";
print "\n";
# Now offers to detect supported mechs, assuming server & port are set correctly
sub command112a {
- if ($use_imap_tls =~ /^true\b/i) {
- print "Auto-detection of login methods is unavailable when using TLS.\n";
+ if ($use_imap_tls ne "0") {
+ # 1. Script does not handle TLS.
+ # 2. Server does not have to declare all supported authentication mechs when
+ # STARTTLS is used. Supported mechs are declared only after STARTTLS.
+ print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
} else {
print "If you have already set the hostname and port number, I can try to\n";
print "detect the mechanisms your IMAP server supports.\n";
# SMTP authentication type
# Possible choices: none, plain, cram-md5, digest-md5
sub command112b {
- if ($use_smtp_tls =~ /^true\b/i) {
- print "Auto-detection of login methods is unavailable when using TLS.\n";
- } else {
+ if ($use_smtp_tls ne "0") {
+ print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
+ } elsif (eval ("use IO::Socket; 1")) {
+ # try loading IO::Socket module
print "If you have already set the hostname and port number, I can try to\n";
print "automatically detect some of the mechanisms your SMTP server supports.\n";
print "Auto-detection is *optional* - you can safely say \"n\" here.\n";
# Special case!
# Check none by trying to relay to junk@microsoft.com
$host = $smtpServerAddress . ':' . $smtpPort;
- use IO::Socket;
my $sock = IO::Socket::INET->new($host);
print "Testing none:\t\t$WHT";
if (!defined($sock)) {
print " ERROR TESTING\n";
close $sock;
} else {
+ $got = <$sock>; # Discard greeting
print $sock "HELO $domain\r\n";
$got = <$sock>; # Discard
print $sock "MAIL FROM:<tester\@squirrelmail.org>\r\n";
$inval=<STDIN>;
chomp($inval);
if ($inval =~ /^none\b/i) {
- # SMTP doesn't necessarily require logins
- return "none";
+ # remove sitewide smtp authentication information
+ $smtp_sitewide_user = '';
+ $smtp_sitewide_pass = '';
+ # SMTP doesn't necessarily require logins
+ return "none";
+ } elsif ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
+ ($inval =~ /^login\b/i) || ($inval =~/^plain\b/i)) {
+ command_smtp_sitewide_userpass($inval);
+ return lc($inval);
+ } elsif (trim($inval) eq '') {
+ # user selected default value
+ command_smtp_sitewide_userpass($smtp_auth_mech);
+ return $smtp_auth_mech;
+ } else {
+ # user entered garbage
+ return $smtp_auth_mech;
+ }
+}
+
+sub command_smtp_sitewide_userpass($) {
+ # get first function argument
+ my $auth_mech = shift(@_);
+ my $default, $tmp;
+ $auth_mech = lc(trim($auth_mech));
+ if ($auth_mech eq 'none') {
+ return;
}
- if ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
- ($inval =~ /^login\b/i) || ($inval =~/^plain\b/i)) {
- return lc($inval);
+ print "SMTP authentication uses IMAP username and password by default.\n";
+ print "\n";
+ print "Would you like to use other login and password for all SquirrelMail \n";
+ print "SMTP connections?";
+ if ($smtp_sitewide_user ne '') {
+ $default = 'y';
+ print " [Y/n]:";
+ } else {
+ $default = 'n';
+ print " [y/N]:";
+ }
+ $tmp=<STDIN>;
+ $tmp = trim($tmp);
+
+ if ($tmp eq '') {
+ $tmp = $default;
+ } else {
+ $tmp = lc($tmp);
+ }
+
+ if ($tmp eq 'n') {
+ $smtp_sitewide_user = '';
+ $smtp_sitewide_pass = '';
+ } elsif ($tmp eq 'y') {
+ print "Enter username [$smtp_sitewide_user]:";
+ my $new_user = <STDIN>;
+ $new_user = trim($new_user);
+ if ($new_user ne '') {
+ $smtp_sitewide_user = $new_user;
+ }
+ if ($smtp_sitewide_user ne '') {
+ print "If you don't enter any password, current sitewide password will be used.\n";
+ print "If you enter space, password will be set to empty string.\n";
+ print "Enter password:";
+ my $new_pass = <STDIN>;
+ if ($new_pass ne "\n") {
+ $smtp_sitewide_pass = trim($new_pass);
+ }
+ } else {
+ print "Invalid input. You must set username used for SMTP authentication.\n";
+ print "Click enter to continue\n";
+ $tmp = <STDIN>;
+ }
} else {
- # user entered garbage, or default value so nothing needs to be set
- return $smtp_auth_mech;
+ print "Invalid input\n";
+ print "Click enter to continue\n";
+ $tmp = <STDIN>;
+ }
+}
+
+# Sub adds information about SMTP authentication type to menu
+sub display_smtp_sitewide_userpass() {
+ my $ret = '';
+ if ($smtp_auth_mech ne 'none') {
+ if ($smtp_sitewide_user ne '') {
+ $ret = ' (with custom username and password)';
+ } else {
+ $ret = ' (with IMAP username and password)';
+ }
}
+ return $ret;
}
# TLS
# This sub is reused for IMAP and SMTP
# Args: service name, default value
-sub command113 {
+sub command_use_tls {
my($default_val,$service,$inval);
$service=$_[0];
$default_val=$_[1];
print "TLS (Transport Layer Security) encrypts the traffic between server and client.\n";
- print "If you're familiar with SSL, you get the idea.\n";
- print "To use this feature, your " . $service . " server must offer TLS\n";
- print "capability, plus PHP 4.3.x with OpenSSL support.\n";
- print "\nIf your " . $service . " server is localhost, you can safely disable this.\n";
+ print "STARTTLS extensions allow to start encryption on existing plain text connection.\n";
+ print "These options add specific PHP and IMAP server configuration requirements.\n";
+ print "See SquirrelMail documentation about connection security.\n";
+ print "\n";
+ print "If your " . $service . " server is localhost, you can safely disable this.\n";
print "If it is remote, you may wish to seriously consider enabling this.\n";
- print "Enable TLS (y/n) [$WHT";
- if ($default_val eq 'true') {
- print "y";
- } else {
- print "n";
+ $valid_input=0;
+ while ($valid_input eq 0) {
+ print "\nSelect connection security model:\n";
+ print " 0 - Use plain text connection\n";
+ print " 1 - Use TLS connection\n";
+ print " 2 - Use STARTTLS extension\n";
+ print "Select [$default_val]: ";
+ $inval=<STDIN>;
+ $inval=trim($inval);
+ if ($inval =~ /^[012]$/ || $inval eq '') {
+ $valid_input = 1;
+ }
}
- print "$NRM]: $WHT";
- $inval=<STDIN>;
- $inval =~ tr/yn//cd;
- return 'true' if ( $inval eq "y" );
- return 'false' if ( $inval eq "n" );
+ if ($inval ne '') {$default_val = $inval};
return $default_val;
}
+# This sub is used to display human readable text for
+# $use_imap_tls and $use_smtp_tls values in conf.pl menu
+sub display_use_tls($) {
+ my $val = shift(@_);
+ my $ret = 'disabled';
+ if ($val eq '2') {
+ $ret = 'STARTTLS';
+ } elsif ($val eq '1') {
+ $ret = 'TLS';
+ }
+ return $ret;
+}
+
# $encode_header_key
-sub command114{
+sub command114 {
print "Encryption key allows to hide SquirrelMail Received: headers\n";
print "in outbound messages. Interface uses encryption key to encode\n";
print "username, remote address and proxied address, then stores encoded\n";
$line =~ s/ /\ \ /g;
$line =~ s/\t/\ \ \ \ /g;
$line =~ s/$/ /;
- $line =~ s/\"/"/g;
+ $line =~ s/\"/\\\"/g;
$new_motd = $new_motd . $line;
}
return @plugins;
}
+# disable_plugins_user
+sub command82 {
+ print "When all active plugins are disabled, they can be disabled only\n";
+ print "for the one user named here. If left blank, plugins will be\n";
+ print "disabled for ALL users. This setting has no effect if plugins\n";
+ print "are not disabled.\n";
+ print "\n";
+ print "This must be the exact IMAP login name for the desired user.\n";
+ print "\n";
+ print "[$WHT$disable_plugins_user$NRM]: $WHT";
+ $new_disable_plugins_user = <STDIN>;
+ if ( $new_disable_plugins_user eq "\n" ) {
+ $new_disable_plugins_user = $disable_plugins_user;
+ } else {
+ $new_disable_plugins_user =~ s/[\r\n]//g;
+ }
+ return $new_disable_plugins_user;
+}
+
################# FOLDERS ###################
# default_folder_prefix
if ( $new_trash_folder eq "\n" ) {
$new_trash_folder = $trash_folder;
} else {
- $new_trash_folder =~ s/[\r\n]//g;
+ if (check_imap_folder($new_trash_folder)) {
+ $new_trash_folder =~ s/[\r\n]//g;
+ } else {
+ $new_trash_folder = $trash_folder;
+ }
}
return $new_trash_folder;
}
if ( $new_sent_folder eq "\n" ) {
$new_sent_folder = $sent_folder;
} else {
- $new_sent_folder =~ s/[\r\n]//g;
+ if (check_imap_folder($new_sent_folder)) {
+ $new_sent_folder =~ s/[\r\n]//g;
+ } else {
+ $new_sent_folder = $sent_folder;
+ }
}
return $new_sent_folder;
}
if ( $new_draft_folder eq "\n" ) {
$new_draft_folder = $draft_folder;
} else {
- $new_draft_folder =~ s/[\r\n]//g;
+ if (check_imap_folder($new_draft_folder)) {
+ $new_draft_folder =~ s/[\r\n]//g;
+ } else {
+ $new_draft_folder = $draft_folder;
+ }
}
return $new_draft_folder;
}
return $default_move_to_trash;
}
-# default move to sent
+# default move to sent (save sent messages)
sub command24b {
- print "By default, should messages get moved to the sent folder? You\n";
- print "can specify the default sent folder in option 4. If this is set\n";
- print "to false, messages will get sent and no copy will be made.\n";
+ print "By default, should copies of outgoing messages get saved in the\n";
+ print "sent folder? You can specify the default sent folder in option 4.\n";
+ print "If this is set to false, messages will get sent and no copy will\n";
+ print "be made.\n";
print "\n";
print "Sent folder is currently: $sent_folder\n";
print "\n";
} else {
$default_value = "n";
}
- print "By default, move to sent (y/n) [$WHT$default_value$NRM]: $WHT";
+ print "By default, save sent messages (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_move_to_sent = 'true';
print "Drafts folder is currently: $draft_folder\n";
print "\n";
- if ( lc($default_move_to_draft) eq 'true' ) {
+ if ( lc($default_save_as_draft) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
print "Deleting folders will bypass the trash folder and be immediately deleted\n\n";
print "If this is not the correct value for your server,\n";
print "please use option D on the Main Menu to configure your server correctly.\n\n";
- print "Press any key to continue...\n";
+ print "Press enter to continue...\n";
$new_delete = <STDIN>;
$delete_folder = 'true';
} else {
#noselect fix
sub command216 {
- print "Some IMAP server allow subfolders to exist even if the parent\n";
+ print "Some IMAP servers allow subfolders to exist even if the parent\n";
print "folders do not. This fixes some problems with the folder list\n";
print "when this is the case, causing the /NoSelect folders to be displayed\n";
print "\n";
# Data directory
sub command33a {
print "Specify the location for your data directory.\n";
+ print "You need to create this directory yourself.\n";
print "The path name can be absolute or relative (to the config directory).\n";
- print "It doesn't matter. Here are two examples:\n";
- print " Absolute: /var/spool/data/\n";
+ print "Here are two examples:\n";
+ print " Absolute: /var/local/squirrelmail/data/\n";
print " Relative: ../data/\n";
print "Relative paths to directories outside of the SquirrelMail distribution\n";
print "will be converted to their absolute path equivalents in config.php.\n\n";
# Attachment directory
sub command33b {
print "Path to directory used for storing attachments while a mail is\n";
- print "being sent. The path name can be absolute or relative (to the config directory).\n";
- print "It doesn't matter. Here are two examples:\n";
- print " Absolute: /var/spool/attach/\n";
+ print "being composed. The path name can be absolute or relative (to the\n";
+ print "config directory). Here are two examples:\n";
+ print " Absolute: /var/local/squirrelmail/attach/\n";
print " Relative: ../attach/\n";
print "Relative paths to directories outside of the SquirrelMail distribution\n";
print "will be converted to their absolute path equivalents in config.php.\n\n";
print "";
print "\n";
- if ( lc($default_hide_attribution) eq 'true' ) {
+ if ( lc($hide_sm_attributions) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
sub command310 {
- print "This allows you to prevent the editing of the user's name and ";
- print "email address. This is mainly useful when used with the ";
- print "retrieveuserdata plugin\n";
- print "\n";
+ print " In loosely managed environments, you may want to allow users
+ to edit their full name and email address. In strictly managed
+ environments, you may want to force users to use the name
+ and email address assigned to them.
+
+ 'y' - allow a user to edit their full name and email address,
+ 'n' - users must use the assigned values.
+
+ ";
if ( lc($edit_identity) eq 'true' ) {
$default_value = "y";
if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$edit_identity = 'true';
$edit_name = 'true';
- $hide_auth_header = 'false';
+ $hide_auth_header = command311b();
} else {
$edit_identity = 'false';
$edit_name = command311();
}
sub command311 {
- print "As a follow-up, this option allows you to choose if the user ";
- print "can edit their full name even when you don't want them to ";
- print "change their username\n";
- print "\n";
+ print " Given that users are not allowed to modify their
+ email address, can they edit their full name?
+
+ ";
if ( lc($edit_name) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
- print "Allow editing of the users full name? (y/n) [$WHT$default_value$NRM]: $WHT";
+ print "Allow the user to edit their full name? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_edit = <STDIN>;
if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$edit_name = 'true';
}
sub command311b {
- print "SquirrelMail adds username information to every sent email.";
- print "It is done in order to prevent possible sender forging when ";
- print "end users are allowed to change their email and name ";
- print "information.\n";
- print "\n";
- print "You can disable this header, if you think that it violates ";
- print "user's privacy or security. Please note, that setting will ";
- print "work only when users are not allowed to change their identity.\n";
- print "\n";
+ print " SquirrelMail adds username information to every sent email
+ in order to prevent possible sender forging when users are allowed
+ to change their email and/or full name.
+
+ You can remove user information from this header (y), if you think that
+ it violates privacy or security.
+
+ Note: If users are allowed to change their email addresses,
+ this setting will make it difficult to determine who sent what where.
+ Use at your own risk.
+
+ ";
if ( lc($hide_auth_header) eq "true" ) {
$default_value = "y";
} else {
$hide_auth_header = "false";
}
- return $edit_name;
+ return $hide_auth_header;
}
sub command312 {
- print "This option allows you to choose if users can use thread sorting\n";
- print "Your IMAP server must support the THREAD command for this to work\n";
- print "PHP versions later than 4.0.3 recommended\n";
+ print "This option allows you to disable server side thread sorting if your server \n";
+ print "declares THREAD support, but you don't want to provide threading options \n";
+ print "to end users or THREAD extension is broken or extension does not work with \n";
+ print "options used by SquirrelMail. Option is not used, if THREAD extension is \n";
+ print "not declared in IMAP CAPABILITY.\n";
print "\n";
- if ( lc($allow_thread_sort) eq 'true' ) {
+ if ( lc($disable_thread_sort) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
- print "Allow server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
- $allow_thread_sort = <STDIN>;
- if ( ( $allow_thread_sort =~ /^y\n/i ) || ( ( $allow_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
- $allow_thread_sort = 'true';
+ print "Disable server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $disable_thread_sort = <STDIN>;
+ if ( ( $disable_thread_sort =~ /^y\n/i ) || ( ( $disable_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $disable_thread_sort = 'true';
} else {
- $allow_thread_sort = 'false';
+ $disable_thread_sort = 'false';
}
- return $allow_thread_sort;
+ return $disable_thread_sort;
}
sub command313 {
- print "This option allows you to choose if SM uses server-side sorting\n";
- print "Your IMAP server must support the SORT command for this to work\n";
+ print "This option allows you to disable server side sorting if your server declares \n";
+ print "SORT support, but SORT extension is broken or does not work with options \n";
+ print "used by SquirrelMail. Option is not used, if SORT extension is not declared \n";
+ print "in IMAP CAPABILITY.\n";
+ print "\n";
+ print "It is strongly recommended to keep server side sorting enabled, if your ";
+ print "IMAP server supports it.";
print "\n";
- if ( lc($allow_server_sort) eq 'true' ) {
+ if ( lc($disable_server_sort) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
- print "Allow server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
- $allow_server_sort = <STDIN>;
- if ( ( $allow_server_sort =~ /^y\n/i ) || ( ( $allow_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
- $allow_server_sort = 'true';
+ print "Disable server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $disable_server_sort = <STDIN>;
+ if ( ( $disable_server_sort =~ /^y\n/i ) || ( ( $disable_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $disable_server_sort = 'true';
} else {
- $allow_server_sort = 'false';
+ $disable_server_sort = 'false';
}
- return $allow_server_sort;
+ return $disable_server_sort;
}
sub command314 {
return $new_session_name;
}
+# time zone config (since 1.5.1)
+sub command318 {
+ print "This option allows you to control the use of time zones.\n";
+ print " 0 = (default) standard, GNU C time zone names\n";
+ print " 1 = strict, generic time zone codes with offsets\n";
+ print " 2 = custom, GNU C time zones loaded from config/timezones.php\n";
+ print " 3 = custom strict, generic time zone codes with offsets loaded \n";
+ print " from config/timezones.php\n";
+ print "See SquirrelMail documentation about format of config/timezones.php file.\n";
+ print "\n";
+
+ print "Desired time zone configuration (0,1,2,3)? [$WHT$time_zone_type$NRM]: $WHT";
+ $new_time_zone_type = <STDIN>;
+ if ( $new_time_zone_type =~ /^[0123]\n/i ) {
+ $time_zone_type = $new_time_zone_type;
+ } else {
+ print "\nInvalid configuration value.\n";
+ print "\nPress enter to continue...";
+ $tmp = <STDIN>;
+ }
+ $time_zone_type =~ s/[\r\n]//g;
+ return $time_zone_type;
+}
+
+# set the location base for redirects (since 1.5.2)
+sub command_config_location_base {
+ print "Here you can set the base part of the SquirrelMail URL.\n";
+ print "It is normally autodetected but if that fails, use this\n";
+ print "option to override.\n";
+ print "It should contain only the protocol and hostname/port parts\n";
+ print "of the URL; the full path will be appended automatically.\n\n";
+ print "Examples:\nhttp://webmail.example.org\nhttp://webmail.example.com:8080\nhttps://webmail.example.com:6691\n\n";
+ print "Do not add any path elements.\n";
+
+ print "URL base? [" .$WHT."autodetect$NRM]: $WHT";
+ $new_config_location_base = <STDIN>;
+ chomp($new_config_location_base);
+ $config_location_base = $new_config_location_base;
+
+ return $config_location_base;
+}
+
+# only_secure_cookies (since 1.5.2)
+sub command319 {
+ print "This option allows you to specify that if a user session is initiated\n";
+ print "under a secure (HTTPS, SSL-encrypted) connection, the cookies given to\n";
+ print "the browser will ONLY be transmitted via a secure connection henceforth.\n\n";
+ print "Generally this is a Good Thing, and should NOT be disabled. However,\n";
+ print "if you intend to use the Secure Login or Show SSL Link plugins to\n";
+ print "encrypt the user login, but not the rest of the SquirrelMail session,\n";
+ print "this can be turned off. Think twice before doing so.\n";
+ print "\n";
+
+ if ( lc($only_secure_cookies) eq 'true' ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Transmit cookies only on secure connection when available? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $only_secure_cookies = <STDIN>;
+ if ( ( $only_secure_cookies =~ /^y\n/i ) || ( ( $only_secure_cookies =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $only_secure_cookies = 'true';
+ } else {
+ $only_secure_cookies = 'false';
+ }
+ return $only_secure_cookies;
+}
+
+
+sub command_userThemes {
+ print "\nDefine the user themes that you wish to use. If you have added\n";
+ print "a theme of your own, just follow the instructions (?) about\n";
+ print "how to add them. You can also change the default theme.\n\n";
+
+ print "Available user themes:\n";
+ $count = 0;
+ while ( $count <= $#user_theme_name ) {
+ if ( $count == $user_theme_default ) {
+ print " *";
+ } else {
+ print " ";
+ }
+ if ( $count < 10 ) {
+ print " ";
+ }
+ $name = $user_theme_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
+ print " $count. $name";
+ print "($user_theme_path[$count])\n";
-sub command41 {
- print "\nDefine the themes that you wish to use. If you have added ";
- print "a theme of your own, just follow the instructions (?) about how to add ";
- print "them. You can also change the default theme.\n";
- print "[theme] command (?=help) > ";
+ $count++;
+ }
+
+ print "\n";
+ print ".------------------------------------.\n";
+ print "| t (detect user themes) |\n";
+ print "| + (add user theme) |\n";
+ print "| - N (remove user theme) |\n";
+ print "| m N (mark default user theme) |\n";
+ print "| l (list user themes) |\n";
+ print "| d (done) |\n";
+ print "`------------------------------------'\n";
+
+ print "\n[user_themes] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r\n]//g;
while ( $input ne "d" ) {
if ( $input =~ /^\s*l\s*/i ) {
$count = 0;
- while ( $count <= $#theme_name ) {
- if ( $count == $theme_default ) {
+ while ( $count <= $#user_theme_name ) {
+ if ( $count == $user_theme_default ) {
print " *";
} else {
print " ";
if ( $count < 10 ) {
print " ";
}
- $name = $theme_name[$count];
+ $name = $user_theme_name[$count];
$num_spaces = 35 - length($name);
for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
$name = $name . " ";
}
print " $count. $name";
- print "($theme_path[$count])\n";
+ print "($user_theme_path[$count])\n";
$count++;
}
} elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
- $old_def = $theme_default;
- $theme_default = $input;
- $theme_default =~ s/^\s*m\s*//;
- if ( ( $theme_default > $#theme_name ) || ( $theme_default < 0 ) ) {
- print "Cannot set default theme to $theme_default. That theme does not exist.\n";
- $theme_default = $old_def;
+ $old_def = $user_theme_default;
+ $user_theme_default = $input;
+ $user_theme_default =~ s/^\s*m\s*//;
+ if ( ( $user_theme_default > $#user_theme_name ) || ( $user_theme_default < 0 ) ) {
+ print "Cannot set default theme to $user_theme_default. That theme does not exist.\n";
+ $user_theme_default = $old_def;
}
} elsif ( $input =~ /^\s*\+/ ) {
- print "What is the name of this theme: ";
+ print "What is the name of this theme? ";
$name = <STDIN>;
$name =~ s/[\r\n]//g;
- $theme_name[ $#theme_name + 1 ] = $name;
- print "Be sure to put ../themes/ before the filename.\n";
- print "What file is this stored in (ex: ../themes/default_theme.php): ";
+ $user_theme_name[ $#user_theme_name + 1 ] = $name;
+ print "Be sure to put ../css/ before the filename.\n";
+ print "What file is this stored in (ex: ../css/my_theme/): ";
$name = <STDIN>;
$name =~ s/[\r\n]//g;
- $theme_path[ $#theme_path + 1 ] = $name;
+ $user_theme_path[ $#user_theme_path + 1 ] = $name;
} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
if ( $input =~ /[0-9]+\s*$/ ) {
$rem_num = $input;
$rem_num =~ s/^\s*-\s*//g;
$rem_num =~ s/\s*$//;
} else {
- $rem_num = $#theme_name;
+ $rem_num = $#user_theme_name;
}
- if ( $rem_num == $theme_default ) {
+ if ( $rem_num == $user_theme_default ) {
print "You cannot remove the default theme!\n";
} else {
$count = 0;
@new_theme_name = ();
@new_theme_path = ();
- while ( $count <= $#theme_name ) {
+ while ( $count <= $#user_theme_name ) {
if ( $count != $rem_num ) {
- @new_theme_name = ( @new_theme_name, $theme_name[$count] );
- @new_theme_path = ( @new_theme_path, $theme_path[$count] );
+ @new_theme_name = ( @new_theme_name, $user_theme_name[$count] );
+ @new_theme_path = ( @new_theme_path, $user_theme_path[$count] );
}
$count++;
}
- @theme_name = @new_theme_name;
- @theme_path = @new_theme_path;
- if ( $theme_default > $rem_num ) {
- $theme_default--;
+ @user_theme_name = @new_theme_name;
+ @user_theme_path = @new_theme_path;
+ if ( $user_theme_default > $rem_num ) {
+ $user_theme_default--;
}
}
} elsif ( $input =~ /^\s*t\s*/i ) {
print "\nStarting detection...\n\n";
- opendir( DIR, "../themes" );
- @files = grep { /\.php$/i } readdir(DIR);
+ opendir( DIR, "../css" );
+ @files = sort(readdir(DIR));
$cnt = 0;
while ( $cnt <= $#files ) {
- $filename = "../themes/" . $files[$cnt];
- if ( $filename ne "../themes/index.php" ) {
+ $filename = "../css/" . $files[$cnt] .'/';
+ if ( $files[$cnt] !~ /^\./ && $filename ne "../css/rtl.css" && -e $filename . "default.css" ) {
$found = 0;
- for ( $x = 0 ; $x <= $#theme_path ; $x++ ) {
- if ( $theme_path[$x] eq $filename ) {
+ for ( $x = 0 ; $x <= $#user_theme_path ; $x++ ) {
+ if ( $user_theme_path[$x] eq $filename ) {
$found = 1;
}
}
if ( $found != 1 ) {
- print "** Found theme: $filename\n";
- print " What is its name? ";
+ print "** Found user theme: $filename\n";
+ $def = $files[$cnt];
+ $def =~ s/_/ /g;
+ $def = lc($def);
+ #$def =~ s/(^\w+)/ucfirst $1/eg;
+ #$def =~ s/(\s+)(\w+)/$1 . ucfirst $2/eg;
+ $def =~ s/(^\w+)|(\s+)(\w+)/ucfirst $1 . $2 . ucfirst $3/eg;
+ print " What is its name? [$def]: ";
$nm = <STDIN>;
- $nm =~ s/[\n\r]//g;
- $theme_name[ $#theme_name + 1 ] = $nm;
- $theme_path[ $#theme_path + 1 ] = $filename;
+ $nm =~ s/^\s+|\s+$|[\n\r]//g;
+ if ( $nm eq '' ) { $nm = $def; }
+ $user_theme_name[ $#user_theme_name + 1 ] = $nm;
+ $user_theme_path[ $#user_theme_path + 1 ] = $filename;
}
}
$cnt++;
}
print "\n";
- for ( $cnt = 0 ; $cnt <= $#theme_path ; $cnt++ ) {
- $filename = $theme_path[$cnt];
- if ( !( -e $filename ) ) {
+ for ( $cnt = 0 ; $cnt <= $#user_theme_path ; $cnt++ ) {
+ $filename = $user_theme_path[$cnt];
+ if ( $filename != 'none' && !( -e $filename ."/default.css" ) ) {
print " Removing $filename (file not found)\n";
$offset = 0;
- @new_theme_name = ();
- @new_theme_path = ();
- for ( $x = 0 ; $x < $#theme_path ; $x++ ) {
- if ( $theme_path[$x] eq $filename ) {
+ @new_user_theme_name = ();
+ @new_user_theme_path = ();
+ for ( $x = 0 ; $x < $#user_theme_path ; $x++ ) {
+ if ( $user_theme_path[$x] eq $filename ) {
$offset = 1;
}
if ( $offset == 1 ) {
- $new_theme_name[$x] = $theme_name[ $x + 1 ];
- $new_theme_path[$x] = $theme_path[ $x + 1 ];
+ $new_user_theme_name[$x] = $user_theme_name[ $x + 1 ];
+ $new_user_theme_path[$x] = $user_theme_path[ $x + 1 ];
} else {
- $new_theme_name[$x] = $theme_name[$x];
- $new_theme_path[$x] = $theme_path[$x];
+ $new_user_theme_name[$x] = $user_theme_name[$x];
+ $new_user_theme_path[$x] = $user_theme_path[$x];
}
}
- @theme_name = @new_theme_name;
- @theme_path = @new_theme_path;
+ @user_theme_name = @new_user_theme_name;
+ @user_theme_path = @new_user_theme_path;
}
}
print "\nDetection complete!\n\n";
closedir DIR;
} elsif ( $input =~ /^\s*\?\s*/ ) {
- print ".-------------------------.\n";
- print "| t (detect themes) |\n";
- print "| + (add theme) |\n";
- print "| - N (remove theme) |\n";
- print "| m N (mark default) |\n";
- print "| l (list themes) |\n";
- print "| d (done) |\n";
- print "`-------------------------'\n";
+ print ".------------------------------------.\n";
+ print "| t (detect user themes) |\n";
+ print "| + (add user theme) |\n";
+ print "| - N (remove user theme) |\n";
+ print "| m N (mark default user theme) |\n";
+ print "| l (list user themes) |\n";
+ print "| d (done) |\n";
+ print "`------------------------------------'\n";
}
- print "[theme] command (?=help) > ";
+ print "[user_themes] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r\n]//g;
}
}
-# Theme - CSS file
-sub command42 {
- print "You may specify a cascading style-sheet (CSS) file to be included\n";
- print "on each html page generated by SquirrelMail. The CSS file is useful\n";
- print "for specifying a site-wide font. If you're not familiar with CSS\n";
- print "files, leave this blank.\n";
- print "\n";
- print "To clear out an existing value, just type a space for the input.\n";
- print "\n";
- print "Please be aware of the following: \n";
- print " - Relative URLs are relative to the config dir\n";
- print " to use the themes directory, use ../themes/css/newdefault.css\n";
- print " - To specify a css file defined outside the SquirrelMail source tree\n";
- print " use the absolute URL the webserver would use to include the file\n";
- print " e.g. http://some.host.com/css/mystyle.css or /css/mystyle.css\n";
- print "\n";
- print "[$WHT$theme_css$NRM]: $WHT";
- $new_theme_css = <STDIN>;
+sub command_iconSets {
+ print "\nDefine the icon themes that you wish to use. If you have added\n";
+ print "a theme of your own, just follow the instructions (?) about\n";
+ print "how to add them. You can also change the default and fallback\n";
+ print "themes. The default theme will be used when no icon theme is\n";
+ print "set by the user. The fallback theme will be used if an icon\n";
+ print "cannot be found in the currently selected icon theme.\n\n";
+
+ print "Available icon themes:\n\n";
+
+ $count = 0;
+ while ( $count <= $#icon_theme_name ) {
+ if ( $count == $icon_theme_def ) {
+ print " d";
+ } else {
+ print " ";
+ }
+ if ( $count eq $icon_theme_fallback ) {
+ print "f ";
+ } else {
+ print " ";
+ }
+ if ( $count < 10 ) {
+ print " ";
+ }
+ $name = $icon_theme_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
- if ( $new_theme_css eq "\n" ) {
- $new_theme_css = $theme_css;
- } else {
- $new_theme_css =~ s/[\r\n]//g;
- }
- $new_theme_css =~ s/^\s*//;
- return $new_theme_css;
-}
+ print " $count. $name";
+ print "($icon_theme_path[$count])\n";
-sub command61 {
- print "You can now define different LDAP servers.\n";
- print "[ldap] command (?=help) > ";
+ $count++;
+ }
+
+ print "\n d = Default icon theme\n";
+ print " f = Fallback icon theme\n";
+ print "\n";
+ print ".------------------------------------.\n";
+ print "| t (detect icon themes) |\n";
+ print "| + (add icon theme) |\n";
+ print "| - N (remove icon theme) |\n";
+ print "| m N (mark default icon theme) |\n";
+ print "| f N (set fallback icon set) |\n";
+ print "| l (list icon themes) |\n";
+ print "| d (done) |\n";
+ print "`------------------------------------'\n";
+
+ print "\n[icon_themes] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r\n]//g;
while ( $input ne "d" ) {
if ( $input =~ /^\s*l\s*/i ) {
$count = 0;
- while ( $count <= $#ldap_host ) {
- print "$count. $ldap_host[$count]\n";
- print " base: $ldap_base[$count]\n";
- if ( $ldap_charset[$count] ) {
- print " charset: $ldap_charset[$count]\n";
- }
- if ( $ldap_port[$count] ) {
- print " port: $ldap_port[$count]\n";
- }
- if ( $ldap_name[$count] ) {
- print " name: $ldap_name[$count]\n";
- }
- if ( $ldap_maxrows[$count] ) {
- print " maxrows: $ldap_maxrows[$count]\n";
- }
- if ( $ldap_filter[$count] ) {
- print " filter: $ldap_filter[$count]\n";
- }
- if ( $ldap_binddn[$count] ) {
- print " binddn: $ldap_binddn[$count]\n";
- if ( $ldap_bindpw[$count] ) {
- print " bindpw: $ldap_bindpw[$count]\n";
- }
- }
- if ( $ldap_protocol[$count] ) {
- print " protocol: $ldap_protocol[$count]\n";
- }
- if ( $ldap_limit_scope[$count] ) {
- print " limit_scope: $ldap_limit_scope[$count]\n";
+ print "\n";
+ while ( $count <= $#icon_theme_name ) {
+ if ( $count == $icon_theme_def ) {
+ print " d";
+ } else {
+ print " ";
+ }
+ if ( $count eq $icon_theme_fallback ) {
+ print "f ";
+ } else {
+ print " ";
+ }
+ $name = $icon_theme_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
}
- print "\n";
+ print " $count. $name";
+ print "($icon_theme_path[$count])\n";
+
$count++;
+ }
+ print "\n d = Default icon theme\n";
+ print " f = Fallback icon theme\n\n";
+ } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
+ $old_def = $icon_theme_def;
+ $icon_theme_def = $input;
+ $icon_theme_def =~ s/^\s*m\s*//;
+ if ( ( $icon_theme_default > $#icon_theme_name ) || ( $icon_theme_default < 0 ) ) {
+ print "Cannot set default icon theme to $icon_theme_default. That theme does not exist.\n";
+ $icon_theme_def = $old_def;
+ }
+ } elsif ( $input =~ /^\s*f\s*[0-9]+/i ) {
+ $old_fb = $icon_theme_fallback;
+ $icon_theme_fallback = $input;
+ $icon_theme_fallback =~ s/^\s*f\s*//;
+ if ( ( $icon_theme_fallback > $#icon_theme_name ) || ( $icon_theme_fallback < 0 ) ) {
+ print "Cannot set fallback icon theme to $icon_theme_fallback. That theme does not exist.\n";
+ $icon_theme_fallback = $old_fb;
}
} elsif ( $input =~ /^\s*\+/ ) {
- $sub = $#ldap_host + 1;
-
- print "First, we need to have the hostname or the IP address where\n";
- print "this LDAP server resides. Example: ldap.bigfoot.com\n";
- print "hostname: ";
+ print "What is the name of this icon theme? ";
$name = <STDIN>;
$name =~ s/[\r\n]//g;
- $ldap_host[$sub] = $name;
-
- print "\n";
-
- print "Next, we need the server root (base dn). For this, an empty\n";
- print "string is allowed.\n";
- print "Example: ou=member_directory,o=netcenter.com\n";
- print "base: ";
+ $icon_theme_name[ $#icon_theme_name + 1 ] = $name;
+ print "Be sure to put ../images/themes/ before the filename.\n";
+ print "What directory is this icon theme stored in (ex: ../images/themes/my_theme/)? ";
+ $name = <STDIN>;
+ $name =~ s/[\r\n]//g;
+ $icon_theme_path[ $#icon_theme_path + 1 ] = $name;
+ } elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
+ if ( $input =~ /[0-9]+\s*$/ ) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#icon_theme_name;
+ }
+ if ( $rem_num == $icon_theme_def ) {
+ print "You cannot remove the default icon theme!\n";
+ } elsif ( $rem_num == $icon_theme_fallback ) {
+ print "You cannot remove the fallback icon theme!\n";
+ } else {
+ $count = 0;
+ @new_theme_name = ();
+ @new_theme_path = ();
+ while ( $count <= $#icon_theme_name ) {
+ if ( $count != $rem_num ) {
+ @new_theme_name = ( @new_theme_name, $icon_theme_name[$count] );
+ @new_theme_path = ( @new_theme_path, $icon_theme_path[$count] );
+ }
+ $count++;
+ }
+ @icon_theme_name = @new_theme_name;
+ @icon_theme_path = @new_theme_path;
+ if ( $icon_theme_def > $rem_num ) {
+ $icon_theme_def--;
+ }
+ }
+ } elsif ( $input =~ /^\s*t\s*/i ) {
+ print "\nStarting detection...\n\n";
+
+ opendir( DIR, "../images/themes/" );
+ @files = sort(readdir(DIR));
+ $cnt = 0;
+ while ( $cnt <= $#files ) {
+ $filename = "../images/themes/" . $files[$cnt] .'/';
+ if ( -d "../images/themes/" . $files[$cnt] && $files[$cnt] !~ /^\./ && $files[$cnt] ne ".svn" ) {
+ $found = 0;
+ for ( $x = 0 ; $x <= $#icon_theme_path ; $x++ ) {
+ if ( $icon_theme_path[$x] eq $filename ) {
+ $found = 1;
+ }
+ }
+ if ( $found != 1 ) {
+ print "** Found icon theme: $filename\n";
+ $def = $files[$cnt];
+ $def =~ s/_/ /g;
+ $def = lc($def);
+ #$def =~ s/(^\w+)/ucfirst $1/eg;
+ #$def =~ s/(\s+)(\w+)/$1 . ucfirst $2/eg;
+ $def =~ s/(^\w+)|(\s+)(\w+)/ucfirst $1 . $2 . ucfirst $3/eg;
+ print " What is its name? [$def]: ";
+ $nm = <STDIN>;
+ $nm =~ s/^\s+|\s+$|[\n\r]//g;
+ if ( $nm eq '' ) { $nm = $def; }
+ $icon_theme_name[ $#icon_theme_name + 1 ] = $nm;
+ $icon_theme_path[ $#icon_theme_path + 1 ] = $filename;
+ }
+ }
+ $cnt++;
+ }
+ print "\n";
+ for ( $cnt = 0 ; $cnt <= $#icon_theme_path ; $cnt++ ) {
+ $filename = $icon_theme_path[$cnt];
+ if ( $filename ne "none" && $filename ne "template" && ! -d $filename ) {
+ print " Removing $filename (file not found)\n";
+ $offset = 0;
+ @new_icon_theme_name = ();
+ @new_icon_theme_path = ();
+ for ( $x = 0 ; $x < $#icon_theme_path ; $x++ ) {
+ if ( $icon_theme_path[$x] eq $filename ) {
+ $offset = 1;
+ }
+ if ( $offset == 1 ) {
+ $new_icon_theme_name[$x] = $icon_theme_name[ $x + 1 ];
+ $new_icon_theme_path[$x] = $icon_theme_path[ $x + 1 ];
+ } else {
+ $new_icon_theme_name[$x] = $icon_theme_name[$x];
+ $new_icon_theme_path[$x] = $icon_theme_path[$x];
+ }
+ }
+ @icon_theme_name = @new_icon_theme_name;
+ @icon_theme_path = @new_icon_theme_path;
+ }
+ }
+ print "\nDetection complete!\n\n";
+
+ closedir DIR;
+ } elsif ( $input =~ /^\s*\?\s*/ ) {
+ print ".------------------------------------.\n";
+ print "| t (detect icon themes) |\n";
+ print "| + (add icon theme) |\n";
+ print "| - N (remove icon theme) |\n";
+ print "| m N (mark default icon theme) |\n";
+ print "| f N (set fallback icon set) |\n";
+ print "| l (list icon themes) |\n";
+ print "| d (done) |\n";
+ print "`------------------------------------'\n";
+ }
+ print "[icon_themes] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
+ }
+}
+
+sub command_templates {
+ print "\nDefine the template sets (skins) that you wish to use. If you have added\n";
+ print "a template set of your own, just follow the instructions (?) about\n";
+ print "how to add them. You can also change the default template.\n";
+
+ print "\n Available Templates:\n";
+
+ $count = 0;
+ while ( $count <= $#templateset_name ) {
+ if ( $templateset_id[$count] eq $templateset_default ) {
+ print " d";
+ } else {
+ print " ";
+ }
+ if ( $templateset_id[$count] eq $templateset_fallback ) {
+ print "f ";
+ } else {
+ print " ";
+ }
+ if ( $count < 10 ) {
+ print " ";
+ }
+ $name = $templateset_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
+
+ print " $count. $name";
+ print "($templateset_id[$count])\n";
+
+ $count++;
+ }
+ print "\n d = default template set\n"
+ . " f = fallback template set\n\n";
+
+ $menu_text = ".-------------------------------------.\n"
+ . "| t (detect template set) |\n"
+ . "| + (add template set) |\n"
+ . "| - N (remove template set) |\n"
+ . "| m N (mark default template set) |\n"
+ . "| f N (set fallback template set) |\n"
+ . "| l (list template sets/skins) |\n"
+ . "| d (done) |\n"
+ . "|-------------------------------------|\n"
+ . "| where N is a template set number |\n"
+ . "`-------------------------------------'\n";
+ print "\n";
+ print $menu_text;
+ print "\n[template set] command (?=help) > ";
+
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
+ while ( $input ne "d" ) {
+
+ # list template sets
+ #
+ if ( $input =~ /^\s*l\s*/i ) {
+ $count = 0;
+ while ( $count <= $#templateset_name ) {
+ if ( $templateset_id[$count] eq $templateset_default ) {
+ print " d";
+ } else {
+ print " ";
+ }
+ if ( $templateset_id[$count] eq $templateset_fallback ) {
+ print "f ";
+ } else {
+ print " ";
+ }
+ if ( $count < 10 ) {
+ print " ";
+ }
+ $name = $templateset_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
+
+ print " $count. $name";
+ print "($templateset_id[$count])\n";
+
+ $count++;
+ }
+ print "\n d = default template set\n"
+ . " f = fallback template set\n\n";
+
+ # mark default template set
+ #
+ } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
+ $old_def = $templateset_default;
+ $input =~ s/^\s*m\s*//;
+ $templateset_default = $templateset_id[$input];
+ if ( $templateset_default =~ /^\s*$/ ) {
+ print "Cannot set default template set to $input. That template set does not exist.\n";
+ $templateset_default = $old_def;
+ }
+
+ # set fallback template set
+ #
+ } elsif ( $input =~ /^\s*f\s*[0-9]+/i ) {
+ $old_def = $templateset_fallback;
+ $input =~ s/^\s*f\s*//;
+ $templateset_fallback = $templateset_id[$input];
+ if ( $templateset_fallback =~ /^\s*$/ ) {
+ print "Cannot set fallback template set to $input. That template set does not exist.\n";
+ $templateset_fallback = $old_def;
+ }
+
+ # add template set
+ #
+ } elsif ( $input =~ /^\s*\+/ ) {
+ print "\nWhat is the name of this template (as shown to your users): ";
+ $name = <STDIN>;
+ $name =~ s/[\r\n]//g;
+ $templateset_name[ $#templateset_name + 1 ] = $name;
+ print "\n\nThe directory name should not contain any path information\n"
+ . "or slashes, and should be the name of the directory that the\n"
+ . "template set is found in within the SquirrelMail templates\n"
+ . "directory.\n\n";
+ print "What directory is this stored in (ex: default_advanced): ";
+ $name = <STDIN>;
+ $name =~ s/[\r\n]//g;
+ $templateset_id[ $#templateset_id + 1 ] = $name;
+
+ # detect template sets
+ #
+ } elsif ( $input =~ /^\s*t\s*/i ) {
+ print "\nStarting detection...\n\n";
+ opendir( DIR, "../templates" );
+ @files = sort(readdir(DIR));
+ $cnt = 0;
+ while ( $cnt <= $#files ) {
+ if ( -d "../templates/" . $files[$cnt] && $files[$cnt] !~ /^\./ && $files[$cnt] ne ".svn" ) {
+ $filename = $files[$cnt];
+ $found = 0;
+ for ( $x = 0 ; $x <= $#templateset_id ; $x++ ) {
+ if ( $templateset_id[$x] eq $filename ) {
+ $found = 1;
+ last;
+ }
+ }
+ if ( $found != 1) {
+ print "** Found template set: $filename\n";
+ $def = $files[$cnt];
+ $def =~ s/_/ /g;
+ $def = lc($def);
+ #$def =~ s/(^\w+)/ucfirst $1/eg;
+ #$def =~ s/(\s+)(\w+)/$1 . ucfirst $2/eg;
+ $def =~ s/(^\w+)|(\s+)(\w+)/ucfirst $1 . $2 . ucfirst $3/eg;
+ print " What is it's name (as shown to your users)? [$def]: ";
+ $nm = <STDIN>;
+ $nm =~ s/^\s+|\s+$|[\n\r]//g;
+ if ( $nm eq '' ) { $nm = $def; }
+ $templateset_id[ $#templateset_id + 1 ] = $filename;
+ $templateset_name[ $#templateset_name + 1 ] = $nm;
+ }
+ }
+ $cnt++;
+ }
+ print "\n";
+ for ( $cnt= 0 ; $cnt <= $#templateset_id ; ) {
+ $filename = $templateset_id[$cnt];
+ if ( !(-d change_to_rel_path('SM_PATH . \'templates/' . $filename)) ) {
+ print " Removing \"$filename\" (template set directory not found)\n";
+ if ( $templateset_default eq $filename ) { $templateset_default = 'default'; }
+ if ( $templateset_fallback eq $filename ) { $templateset_fallback = 'default'; }
+ $offset = 0;
+ @new_templateset_name = ();
+ @new_templateset_id = ();
+ for ( $x = 0 ; $x < $#templateset_id ; $x++ ) {
+ if ( $templateset_id[$x] eq $filename ) {
+ $offset = 1;
+ }
+ if ( $offset == 1 ) {
+ $new_templateset_name[$x] = $templateset_name[ $x + 1 ];
+ $new_templateset_id[$x] = $templateset_id[ $x + 1 ];
+ } else {
+ $new_templateset_name[$x] = $templateset_name[$x];
+ $new_templateset_id[$x] = $templateset_id[$x];
+ }
+ }
+ @templateset_name = @new_templateset_name;
+ @templateset_id = @new_templateset_id;
+ } else { $cnt++; }
+ }
+ print "\nDetection complete!\n\n";
+
+ closedir DIR;
+
+ # remove template set
+ #
+ # undocumented functionality of removing last template set isn't that great
+ #} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
+ } elsif ( $input =~ /^\s*-\s*[0-9]+/ ) {
+ if ( $input =~ /[0-9]+\s*$/ ) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#templateset_name;
+ }
+ if ( $templateset_id[$rem_num] eq $templateset_default ) {
+ print "You cannot remove the default template set!\n";
+ } elsif ( $templateset_id[$rem_num] eq $templateset_fallback ) {
+ print "You cannot remove the fallback template set!\n";
+ } else {
+ $count = 0;
+ @new_templateset_name = ();
+ @new_templateset_id = ();
+ while ( $count <= $#templateset_name ) {
+ if ( $count != $rem_num ) {
+ @new_templateset_name = ( @new_templateset_name, $templateset_name[$count] );
+ @new_templateset_id = ( @new_templateset_id, $templateset_id[$count] );
+ }
+ $count++;
+ }
+ @templateset_name = @new_templateset_name;
+ @templateset_id = @new_templateset_id;
+ }
+
+ # help
+ #
+ } elsif ( $input =~ /^\s*\?\s*/ ) {
+ print $menu_text;
+
+ # command not understood
+ #
+ } else {
+ print "Command not understood\n";
+ }
+
+ print "[template set] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
+ }
+ return $templateset_default;
+}
+
+
+# sets default font size option
+sub command_default_fontsize {
+ print "Enter default font size [$WHT$$default_fontsize$NRM]: $WHT";
+ $new_size = <STDIN>;
+ if ( $new_size eq "\n" ) {
+ $new_size = $size;
+ } else {
+ $new_size =~ s/[\r\n]//g;
+ }
+ return $new_size;
+}
+
+# controls available fontsets
+sub command_fontsets {
+ # Greeting
+ print "You can control fontsets available to end users here.\n";
+ # set initial $input value
+ $input = 'l';
+ while ( $input ne "x" ) {
+ if ( $input =~ /^\s*a\s*/i ) {
+ # add new fontset
+ print "\nFontset name: ";
+ $name = <STDIN>;
+ if (! $fontsets{trim($name)}) {
+ print "Fontset string: ";
+ $value = <STDIN>;
+ $fontsets{trim($name)} = trim($value);
+ } else {
+ print "\nERROR: Such fontset already exists.\n";
+ }
+ } elsif ( $input =~ /^\s*e\s*/i ) {
+ # edit existing fontset
+ print "\nFontset name: ";
+ $name = <STDIN>;
+ if (! $fontsets{trim($name)}) {
+ print "\nERROR: No such fontset.\n";
+ } else {
+ print "Fontset string [$fontsets{trim($name)}]: ";
+ $value = <STDIN>;
+ $fontsets{trim($name)} = trim($value);
+ }
+ } elsif ( $input =~ /^\s*d\s*/ ) {
+ # delete existing fontset
+ print "\nFontset name: ";
+ $name = <STDIN>;
+ if (! $fontsets{trim($name)}) {
+ print "\nERROR: No such fontset.\n";
+ } else {
+ delete $fontsets{trim($name)};
+ }
+ } elsif ( $input =~ /^\s*l\s*/ ) {
+ # list fontsets
+ print "\nConfigured fontsets:\n";
+ while (($fontset_name, $fontset_string) = each(%fontsets)) {
+ print " $fontset_name = $fontset_string\n";
+ }
+ print "Default fontset: $default_fontset\n";
+ } elsif ( $input =~ /^\s*m\s*/ ) {
+ # set default fontset
+ print "\nSet default fontset [$default_fontset]: ";
+ $name = <STDIN>;
+ if (trim($name) ne '' and ! $fontsets{trim($name)}) {
+ print "\nERROR: No such fontset.\n";
+ } else {
+ $default_fontset = trim($name);
+ }
+ } else {
+ # print available commands on any other input
+ print "\nAvailable commands:\n";
+ print " a - Adds new fontset.\n";
+ print " d - Deletes existing fontset.\n";
+ print " e - Edits existing fontset.\n";
+ print " h or ? - Shows this help screen.\n";
+ print " l - Lists available fontsets.\n";
+ print " m - Sets default fontset.\n";
+ print " x - Exits fontset editor mode.\n";
+ }
+ print "\nCommand [fontsets] (a,d,e,h,?=help,l,m,x)> ";
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
+ }
+}
+
+sub command61 {
+ print "You can now define different LDAP servers.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
+ print "[ldap] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
+ while ( $input ne "d" ) {
+ if ( $input =~ /^\s*l\s*/i ) {
+ $count = 0;
+ while ( $count <= $#ldap_host ) {
+ print "$count. $ldap_host[$count]\n";
+ print " base: $ldap_base[$count]\n";
+ if ( $ldap_charset[$count] ) {
+ print " charset: $ldap_charset[$count]\n";
+ }
+ if ( $ldap_port[$count] ) {
+ print " port: $ldap_port[$count]\n";
+ }
+ if ( $ldap_name[$count] ) {
+ print " name: $ldap_name[$count]\n";
+ }
+ if ( $ldap_maxrows[$count] ) {
+ print " maxrows: $ldap_maxrows[$count]\n";
+ }
+ if ( $ldap_filter[$count] ) {
+ print " filter: $ldap_filter[$count]\n";
+ }
+ if ( $ldap_binddn[$count] ) {
+ print " binddn: $ldap_binddn[$count]\n";
+ if ( $ldap_bindpw[$count] ) {
+ print " bindpw: $ldap_bindpw[$count]\n";
+ }
+ }
+ if ( $ldap_protocol[$count] ) {
+ print " protocol: $ldap_protocol[$count]\n";
+ }
+ if ( $ldap_limit_scope[$count] ) {
+ print " limit_scope: $ldap_limit_scope[$count]\n";
+ }
+ if ( $ldap_listing[$count] ) {
+ print " listing: $ldap_listing[$count]\n";
+ }
+ if ( $ldap_writeable[$count] ) {
+ print " writeable: $ldap_writeable[$count]\n";
+ }
+ if ( $ldap_search_tree[$count] ) {
+ print " search_tree: $ldap_search_tree[$count]\n";
+ }
+ if ( $ldap_starttls[$count] ) {
+ print " starttls: $ldap_starttls[$count]\n";
+ }
+
+ print "\n";
+ $count++;
+ }
+ } elsif ( $input =~ /^\s*\+/ ) {
+ $sub = $#ldap_host + 1;
+
+ print "First, we need to have the hostname or the IP address where\n";
+ print "this LDAP server resides. Example: ldap.bigfoot.com\n";
+ print "\n";
+ print "You can use any URI compatible with your LDAP library. Please\n";
+ print "note that StartTLS option is not compatible with ldaps and\n";
+ print "ldapi URIs.\n";
+ print "hostname: ";
+ $name = <STDIN>;
+ $name =~ s/[\r\n]//g;
+ $ldap_host[$sub] = $name;
+
+ print "\n";
+
+ print "Next, we need the server root (base dn). For this, an empty\n";
+ print "string is allowed.\n";
+ print "Example: ou=member_directory,o=netcenter.com\n";
+ print "base: ";
$name = <STDIN>;
$name =~ s/[\r\n]//g;
$ldap_base[$sub] = $name;
print "\n";
print "You can specify the maximum number of rows in the search result.\n";
- print "Default is unlimited. Press ENTER for default.\n";
+ print "Default value is equal to 250 rows. Press ENTER for default.\n";
print "maxrows: ";
$name = <STDIN>;
$name =~ s/[\r\n]//g;
$ldap_maxrows[$sub] = $name;
- print "\n";
-
- print "You can specify an additional search filter.\n";
- print "This could be something like \"(objectclass=posixAccount)\".\n";
- print "Default is no extra filter. Press ENTER for default.\n";
- print "filter: ";
- $name = <STDIN>;
- $name =~ s/[\r|\n]//g;
- $ldap_filter[$sub] = $name;
print "\n";
print "\n";
- print "You can control search scope here.\n";
- print "This option is specific to Microsoft ADS implementation.\n";
- print "It requires use of v3 or newer LDAP protocol.\n";
- print "Don't enable it, if you use other LDAP server.\n";
+ print "This configuration section allows to set some rarely used\n";
+ print "options and options specific to some LDAP implementations.\n";
print "\n";
- print "Limit ldap scope? (y/N):";
- $name = <STDIN>;
- if ( $name =~ /^y\n/i ) {
- $name = 'true';
+ print "Do you want to set advanced LDAP directory settings? (y/N):";
+ $ldap_advanced_settings = <STDIN>;
+ if ( $ldap_advanced_settings =~ /^y\n/i ) {
+ $ldap_advanced_settings = 'true';
} else {
- $name = 'false';
+ $ldap_advanced_settings = 'false';
}
- $ldap_limit_scope[$sub] = $name;
+ if ($ldap_advanced_settings eq 'true') {
+ print "\n";
+
+ print "You can control LDAP directory listing here. This option can\n";
+ print "be useful if you run small LDAP server and want to provide listing\n";
+ print "of all addresses stored in LDAP to users of webmail interface.\n";
+ print "Number of displayed entries is limited by maxrows setting.\n";
+ print "\n";
+ print "Don't enable this option for public LDAP directories.\n";
+ print "\n";
+ print "Allow listing of LDAP directory? (y/N):";
+ $name = <STDIN>;
+ if ( $name =~ /^y\n/i ) {
+ $name = 'true';
+ } else {
+ $name = 'false';
+ }
+ $ldap_listing[$sub] = $name;
+
+ print "\n";
+
+ print "You can control write access to LDAP address book here. This option can\n";
+ print "be useful if you run small LDAP server and want to provide writable\n";
+ print "shared address book stored in LDAP to users of webmail interface.\n";
+ print "\n";
+ print "Don't enable this option for public LDAP directories.\n";
+ print "\n";
+ print "Allow writing to LDAP directory? (y/N):";
+ $name = <STDIN>;
+ if ( $name =~ /^y\n/i ) {
+ $name = 'true';
+ } else {
+ $name = 'false';
+ }
+ $ldap_writeable[$sub] = $name;
+
+ print "\n";
+
+ print "You can specify an additional search filter.\n";
+ print "This could be something like \"(objectclass=posixAccount)\".\n";
+ print "No filtering is performed by default. Press ENTER for default.\n";
+ print "filter: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_filter[$sub] = $name;
+
+ print "\n";
+
+ print "You can control search scope here.\n";
+ print "This option is specific to Microsoft ADS implementation.\n";
+ print "It requires use of v3 or newer LDAP protocol.\n";
+ print "Don't enable it, if you use other LDAP server.\n";
+ print "\n";
+ print "Limit ldap scope? (y/N):";
+ $name = <STDIN>;
+ if ( $name =~ /^y\n/i ) {
+ $name = 'true';
+ } else {
+ $name = 'false';
+ }
+ $ldap_limit_scope[$sub] = $name;
+
+ print "\n";
+
+ print "You can control ldap search type here.\n";
+ print "Addresses can be searched in entire LDAP subtree (default)\n";
+ print "or only first level entries are returned.\n";
+ print "\n";
+ print "Search entire LDAP subtree? (Y/n):";
+ $name = <STDIN>;
+ if ( $name =~ /^n\n/i ) {
+ $name = 'false';
+ } else {
+ $name = 'true';
+ }
+ $ldap_search_tree[$sub] = $name;
+
+ print "\n";
+
+ print "You can control use of StartTLS on LDAP connection here.\n";
+ print "This option requires use of v3 or newer LDAP protocol and php 4.2+.\n";
+ print "\n";
+ print "Use StartTLS? (y/N):";
+ $name = <STDIN>;
+ if ( $name =~ /^y\n/i ) {
+ $name = 'true';
+ } else {
+ $name = 'false';
+ }
+ $ldap_starttls[$sub] = $name;
+ }
print "\n";
} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
@new_ldap_binddn = ();
@new_ldap_protocol = ();
@new_ldap_limit_scope = ();
+ @new_ldap_listing = ();
+ @new_ldap_writeable = ();
+ @new_ldap_search_tree = ();
+ @new_ldap_starttls = ();
while ( $count <= $#ldap_host ) {
if ( $count != $rem_num ) {
@new_ldap_bindpw = ( @new_ldap_bindpw, $ldap_bindpw[$count] );
@new_ldap_protocol = ( @new_ldap_protocol, $ldap_protocol[$count] );
@new_ldap_limit_scope = ( @new_ldap_limit_scope, $ldap_limit_scope[$count] );
+ @new_ldap_listing = ( @new_ldap_listing, $ldap_listing[$count] );
+ @new_ldap_writeable = ( @new_ldap_writeable, $ldap_writeable[$count] );
+ @new_ldap_search_tree = ( @new_ldap_search_tree, $ldap_search_tree[$count] );
+ @new_ldap_starttls = ( @new_ldap_starttls, $ldap_starttls[$count] );
}
$count++;
}
@ldap_bindpw = @new_ldap_bindpw;
@ldap_protocol = @new_ldap_protocol;
@ldap_limit_scope = @new_ldap_limit_scope;
+ @ldap_listing = @new_ldap_listing;
+ @ldap_writeable = @new_ldap_writeable;
+ @ldap_search_tree = @new_ldap_search_tree;
+ @ldap_starttls = @new_ldap_starttls;
} elsif ( $input =~ /^\s*\?\s*/ ) {
print ".-------------------------.\n";
return $abook_global_file_listing;
}
+# controls $abook_file_line_length setting
+sub command_abook_file_line_length {
+ print "This setting controls space allocated to file based address book records.\n";
+ print "End users will be unable to save address book entry, if total entry size \n";
+ print "(quoted address book fields + 4 delimiters + linefeed) exceeds allowed \n";
+ print "address book length size.\n";
+ print "\n";
+ print "Same setting is applied to personal and global file based address books.\n";
+ print "\n";
+ print "It is strongly recommended to keep default setting value. Change it only\n";
+ print "if you really want to store address book entries that are bigger than two\n";
+ print "kilobytes (2048).\n";
+ print "\n";
+
+ print "Enter allowed address book line length [$abook_file_line_length]: ";
+ my $tmp = <STDIN>;
+ $tmp = trim($tmp);
+ # value is not modified, if user hits Enter or enters space
+ if ($tmp ne '') {
+ # make sure that input is numeric
+ if ($tmp =~ /^\d+$/) {
+ $abook_file_line_length = $tmp;
+ } else {
+ print "If you want to change this setting, you must enter number.\n";
+ print "If you want to keep original setting - enter space.\n\n";
+ print "Press Enter to continue...";
+ $tmp = <STDIN>;
+ }
+ }
+}
+
sub command91 {
print "If you want to store your users address book details in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
- print "of these are mysql, msql and pgsql\n";
+ print "of these are mysql, msql and pgsql.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
- print "related code for address books will not be used\n";
+ print "related code for address books will not be used.\n";
print "\n";
if ( $addrbook_dsn eq "" ) {
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
- print "of these are mysql, msql and pgsql\n";
+ print "of these are mysql, msql and pgsql.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
- print "related code for address books will not be used\n";
+ print "related code for address books will not be used.\n";
print "\n";
if ( $prefs_dsn eq "" ) {
} else {
$new_field =~ s/[\r\n]//g;
}
+ $prefs_user_size = db_pref_size($prefs_user_size);
return $new_field;
}
} else {
$new_field =~ s/[\r\n]//g;
}
+ $prefs_key_size = db_pref_size($prefs_key_size);
return $new_field;
}
} else {
$new_field =~ s/[\r\n]//g;
}
+ $prefs_val_size = db_pref_size($prefs_val_size);
return $new_field;
}
+# routine is used to set database field limits
+# it needs one argument
+sub db_pref_size() {
+ my ($size) = $_[0];
+ print "\nDatabase fields have size limits.\n";
+ print "\n";
+ print "What limit is set for this field? [$WHT$size$NRM]: $WHT";
+ $new_size = <STDIN>;
+ if ( $new_size eq "\n" ) {
+ $new_size = $size;
+ } else {
+ $new_size =~ s/[\r\n]//g;
+ }
+ return $new_size;
+}
+
sub command98 {
print "If you want to store your global address book in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
- print "of these are mysql, msql and pgsql\n";
+ print "of these are mysql, msql and pgsql.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
- print "related code for global SQL address book will not be used\n";
+ print "related code for global SQL address book will not be used.\n";
print "\n";
if ( $addrbook_global_dsn eq "" ) {
print "This option controls what character set is used when sending\n";
print "mail and when sending HTML to the browser. Option works only\n";
print "with US English (en_US) translation. Other translations use\n";
- print "charsets that are set in functions/i18n.php.\n";
+ print "charsets that are set in translation settings.\n";
print "\n";
print "[$WHT$default_charset$NRM]: $WHT";
# Alternative language names
sub commandA3 {
print "Enable this option if you want to see localized language names in\n";
- print "language selection box. Note, that if don't limit list of available\n";
- print "languages, this option can trigger installation of foreign language\n";
- print "support modules in some browsers.\n";
+ print "language selection box. Note, that this option can trigger\n";
+ print "installation of foreign language support modules in some browsers.\n";
print "\n";
if ( lc($show_alternative_names) eq 'true' ) {
}
return $show_alternative_names;
}
-# Available languages
-sub commandA4 {
- print "This option allows to limit number of languages available in\n";
- print "language selection box. You can enter as code of every language that\n";
- print "you want to enable. Language codes should be separated by space. If you\n";
- print "enter name unsupported by SquirrelMail, it will be ignored. If you enter\n";
- print "special key \'all\' - all languages available in SquirrelMail will be\n";
- print "listed. If you enter special key \'none\' - user won't be able to change";
- print "language and interface will use language set it \"Default language\" option.\n";
- print "\n";
- print "You can find valid language names in doc/i18n.txt.\n";
- print "\n";
- print "[$WHT$available_languages$NRM]: $WHT";
- $new_available_languages = <STDIN>;
- if ( $new_available_languages eq "\n" ) {
- $new_available_languages = $available_languages;
- } else {
- $new_available_languages =~ s/[\r\n]//g;
- $new_available_languages =~ s/^\s+$//g;
- }
- return $new_available_languages;
-}
+
# Aggressive decoding
-sub commandA5 {
+sub commandA4 {
print "Enable this option if you want to use CPU and memory intensive decoding\n";
print "functions. This option allows reading multibyte charset, that are used\n";
print "in Eastern Asia. SquirrelMail will try to use recode functions here,\n";
}
# Lossy encoding
-sub commandA6 {
+sub commandA5 {
print "Enable this option if you want to allow lossy charset encoding in message\n";
print "composition pages. This option allows charset conversions when output\n";
print "charset does not support all symbols used in original charset. Symbols\n";
return $lossy_encoding;
}
-
-# Advanced tree
-sub commandB1 {
- print "Enable this option if you want to use DHTML based folder listing.\n";
- print "Code is experimental, works only with some browsers and there might\n";
- print "be some glitches.\n";
- print "\n";
-
- if ( lc($advanced_tree) eq 'true' ) {
- $default_value = "y";
- } else {
- $default_value = "n";
- }
- print "Use advanced tree in folder listing? (y/n) [$WHT$default_value$NRM]: $WHT";
- $advanced_tree = <STDIN>;
- if ( ( $advanced_tree =~ /^y\n/i ) || ( ( $advanced_tree =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
- $advanced_tree = 'true';
- } else {
- $advanced_tree = 'false';
- }
- return $advanced_tree;
-}
# display html emails in iframe
sub commandB2 {
print "This option can enable html email rendering inside iframe.\n";
}
return $use_iframe;
}
+
+# ask user info
+sub command_ask_user_info {
+ print "New users need to supply their real name and email address to\n";
+ print "send out proper mails. When this option is enabled, a user that\n";
+ print "logs in for the first time will be redirected to the Personal\n";
+ print "Options screen and asked to supply their personal data.\n";
+ print "\n";
+
+ if ( lc($ask_user_info) eq 'true' ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Ask user info? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $ask_user_info = <STDIN>;
+ if ( ( $ask_user_info =~ /^y\n/i ) || ( ( $ask_user_info =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $ask_user_info = 'true';
+ } else {
+ $ask_user_info = 'false';
+ }
+ return $ask_user_info;
+}
+
# use icons
sub commandB3 {
print "Enabling this option will cause icons to be used instead of text\n";
return $allow_remote_configtest;
}
+# Default Icon theme
+sub commandB7 {
+ print "You may change the path to the default icon theme to be used, if icons\n";
+ print "have been enabled. This theme will be used when an icon cannot be\n";
+ print "found in the current theme, or when no icon theme is specified. If\n";
+ print "left blank, and icons are enabled, the default theme will be used\n";
+ print "from images/themes/default/.\n";
+ print "\n";
+ print "To clear out an existing value, just type a space for the input.\n";
+ print "\n";
+ print "Please be aware of the following: \n";
+ print " - Relative URLs are relative to the config dir\n";
+ print " to use the icon themes directory, use ../images/themes/newtheme/\n";
+ print " - The icon theme may be outside the SquirrelMail directory, but\n";
+ print " it must be web accessible.\n";
+ print "[$WHT$icon_theme_def$NRM]: $WHT";
+ $new_icon_theme_def = <STDIN>;
+
+ if ( $new_icon_theme_def eq "\n" ) {
+ $new_icon_theme_def = $icon_theme_def;
+ } else {
+ $new_icon_theme_def =~ s/[\r\n]//g;
+ }
+ $new_icon_theme_def =~ s/^\s*//;
+ return $new_icon_theme_def;
+}
+
+# SquirrelMail debug mode (since 1.5.2)
+sub commandB8 {
+ print "When debugging or developing SquirrelMail, you may want to increase\n";
+ print "the verbosity of certain kinds of errors, notices, and/or diagnostics.\n";
+ print "You may enable one or more of the debugging modes here. Please make\n";
+ print "sure that you have turned off debugging if you are using SquirrelMail\n";
+ print "in a production environment.\n\n";
+
+ $input = "";
+ while ( $input ne "d\n" ) {
+ $sm_debug_mode = convert_debug_constants_to_binary_integer($sm_debug_mode);
+
+ # per include/constants.php, here are the debug mode values:
+ #
+ # 0 SM_DEBUG_MODE_OFF
+ # 1 SM_DEBUG_MODE_SIMPLE
+ # 512 SM_DEBUG_MODE_MODERATE
+ # 524288 SM_DEBUG_MODE_ADVANCED
+ # 536870912 SM_DEBUG_MODE_STRICT
+ #
+ print "\n# Enabled? Description\n";
+ print "---------------------------------------------------------------------\n";
+ print "0 " . ($sm_debug_mode == 0 ? "y" : " ")
+ . " No debugging (recommended in production environments)\n";
+ print "1 " . ($sm_debug_mode & 1 ? "y" : " ")
+ . " Simple debugging (PHP E_ERROR)\n";
+ print "2 " . ($sm_debug_mode & 512 ? "y" : " ")
+ . " Moderate debugging (PHP E_ALL)\n";
+ print "3 " . ($sm_debug_mode & 524288 ? "y" : " ")
+ . " Advanced debugging (PHP E_ALL plus log errors\n";
+ print " intentionally suppressed)\n";
+ print "4 " . ($sm_debug_mode & 536870912 ? "y" : " ")
+ . " Strict debugging (PHP E_STRICT)\n";
+ print "\n";
+
+ print "SquirrelMail debug mode (0,1,2,3,4) or d when done? : $WHT";
+ $input = <STDIN>;
+ if ( $input eq "d\n" ) {
+ # nothing
+ } elsif ($input !~ /^[0-9]+\n$/) {
+ print "\nInvalid configuration value.\n";
+ print "\nPress enter to continue...";
+ $tmp = <STDIN>;
+ } elsif ( $input == "0\n" ) {
+ $sm_debug_mode = 0;
+ } elsif ( $input == "1\n" ) {
+ if ($sm_debug_mode & 1) {
+ $sm_debug_mode ^= 1;
+ } else {
+ $sm_debug_mode |= 1;
+ }
+ } elsif ( $input == "2\n" ) {
+ if ($sm_debug_mode & 512) {
+ $sm_debug_mode ^= 512;
+ } else {
+ $sm_debug_mode |= 512;
+ }
+ } elsif ( $input == "3\n" ) {
+ if ($sm_debug_mode & 524288) {
+ $sm_debug_mode ^= 524288;
+ } else {
+ $sm_debug_mode |= 524288;
+ }
+ } elsif ( $input == "4\n" ) {
+ if ($sm_debug_mode & 536870912) {
+ $sm_debug_mode ^= 536870912;
+ } else {
+ $sm_debug_mode |= 536870912;
+ }
+ } else {
+ print "\nInvalid configuration value.\n";
+ print "\nPress enter to continue...";
+ $tmp = <STDIN>;
+ }
+ print "\n";
+ }
+ $sm_debug_mode = convert_debug_binary_integer_to_constants($sm_debug_mode);
+ return $sm_debug_mode;
+}
+
+# Secured configuration mode (since 1.5.2)
+sub commandB9 {
+ print "This option allows you to enable \"Secured Configuration\" mode,\n";
+ print "which will guarantee that certain settings made herein will be\n";
+ print "made immutable and will not be subject to override by either friendly\n";
+ print "or unfriendly code/plugins. Only a small number of settings herein\n";
+ print "will be used in this manner - just those that are deemed to be a\n";
+ print "potential security threat when rouge plugin or other code may be\n";
+ print "executed inside SquirrelMail.\n";
+ print "\n";
+ if ( lc($secured_config) eq 'true' ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Enable secured configuration mode? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $secured_config = <STDIN>;
+ if ( ( $secured_config =~ /^y\n/i ) || ( ( $secured_config =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $secured_config = 'true';
+ } else {
+ $secured_config = 'false';
+ }
+ return $secured_config;
+}
sub save_data {
$tab = " ";
print CF " * Created using the configure script, conf.pl\n";
print CF " */\n";
print CF "\n";
- print CF "global \$version;\n";
if ($print_config_version) {
print CF "\$config_version = '$print_config_version';\n";
print CF "\$default_charset = '$default_charset';\n";
# boolean
print CF "\$show_alternative_names = $show_alternative_names;\n";
- # string
- print CF "\$available_languages = '$available_languages';\n";
# boolean
print CF "\$aggressive_decoding = $aggressive_decoding;\n";
# boolean
print CF "\$smtpPort = $smtpPort;\n";
# string
print CF "\$sendmail_path = '$sendmail_path';\n";
+ # string
+ print CF "\$sendmail_args = '$sendmail_args';\n";
# boolean
# print CF "\$use_authenticated_smtp = $use_authenticated_smtp;\n";
# boolean
print CF "\$pop_before_smtp = $pop_before_smtp;\n";
# string
+ print CF "\$pop_before_smtp_host = '$pop_before_smtp_host';\n";
+ # string
print CF "\$imap_server_type = '$imap_server_type';\n";
# boolean
print CF "\$invert_time = $invert_time;\n";
print CF "\$encode_header_key = '$encode_header_key';\n";
print CF "\n";
- # string
+ # string
print CF "\$default_folder_prefix = '$default_folder_prefix';\n";
- # string
+ # string
print CF "\$trash_folder = '$trash_folder';\n";
- # string
+ # string
print CF "\$sent_folder = '$sent_folder';\n";
- # string
+ # string
print CF "\$draft_folder = '$draft_folder';\n";
- # boolean
+ # boolean
print CF "\$default_move_to_trash = $default_move_to_trash;\n";
- # boolean
+ # boolean
print CF "\$default_move_to_sent = $default_move_to_sent;\n";
- # boolean
+ # boolean
print CF "\$default_save_as_draft = $default_save_as_draft;\n";
- # boolean
+ # boolean
print CF "\$show_prefix_option = $show_prefix_option;\n";
- # boolean
+ # boolean
print CF "\$list_special_folders_first = $list_special_folders_first;\n";
- # boolean
+ # boolean
print CF "\$use_special_folder_color = $use_special_folder_color;\n";
- # boolean
+ # boolean
print CF "\$auto_expunge = $auto_expunge;\n";
- # boolean
+ # boolean
print CF "\$default_sub_of_inbox = $default_sub_of_inbox;\n";
- # boolean
+ # boolean
print CF "\$show_contain_subfolders_option = $show_contain_subfolders_option;\n";
- # integer
+ # integer
print CF "\$default_unseen_notify = $default_unseen_notify;\n";
- # integer
+ # integer
print CF "\$default_unseen_type = $default_unseen_type;\n";
- # boolean
+ # boolean
print CF "\$auto_create_special = $auto_create_special;\n";
- # boolean
+ # boolean
print CF "\$delete_folder = $delete_folder;\n";
- # boolean
+ # boolean
print CF "\$noselect_fix_enable = $noselect_fix_enable;\n";
print CF "\n";
- # string
+ # string
print CF "\$data_dir = " . &change_to_SM_path($data_dir) . ";\n";
- # string that can contain a variable
+ # string that can contain a variable
print CF "\$attachment_dir = " . &change_to_SM_path($attachment_dir) . ";\n";
- # integer
+ # integer
print CF "\$dir_hash_level = $dir_hash_level;\n";
- # string
+ # string
print CF "\$default_left_size = '$default_left_size';\n";
- # boolean
+ # boolean
print CF "\$force_username_lowercase = $force_username_lowercase;\n";
- # boolean
+ # boolean
print CF "\$default_use_priority = $default_use_priority;\n";
- # boolean
+ # boolean
print CF "\$hide_sm_attributions = $hide_sm_attributions;\n";
- # boolean
+ # boolean
print CF "\$default_use_mdn = $default_use_mdn;\n";
- # boolean
+ # boolean
print CF "\$edit_identity = $edit_identity;\n";
- # boolean
+ # boolean
print CF "\$edit_name = $edit_name;\n";
- # boolean
+ # boolean
print CF "\$hide_auth_header = $hide_auth_header;\n";
- # boolean
- print CF "\$allow_thread_sort = $allow_thread_sort;\n";
- # boolean
- print CF "\$allow_server_sort = $allow_server_sort;\n";
- # boolean
+ # boolean
+ print CF "\$disable_thread_sort = $disable_thread_sort;\n";
+ # boolean
+ print CF "\$disable_server_sort = $disable_server_sort;\n";
+ # boolean
print CF "\$allow_charset_search = $allow_charset_search;\n";
- # integer
+ # integer
print CF "\$allow_advanced_search = $allow_advanced_search;\n";
print CF "\n";
+ # integer
+ print CF "\$time_zone_type = $time_zone_type;\n";
+ print CF "\n";
+ # string
+ print CF "\$config_location_base = '$config_location_base';\n";
+ print CF "\n";
+ # boolean
+ print CF "\$disable_plugins = $disable_plugins;\n";
+ # string
+ print CF "\$disable_plugins_user = '$disable_plugins_user';\n";
+ print CF "\n";
+
+ # all plugins are strings
+ for ( $ct = 0 ; $ct <= $#plugins ; $ct++ ) {
+ print CF "\$plugins[] = '$plugins[$ct]';\n";
+ }
+ print CF "\n";
+
+ # strings
+ if ( $user_theme_default eq '' ) { $user_theme_default = '0'; }
+ print CF "\$user_theme_default = $user_theme_default;\n";
+
+ for ( $count = 0 ; $count <= $#user_theme_name ; $count++ ) {
+ if ($user_theme_path[$count] eq 'none') {
+ $path = '\'none\'';
+ } else {
+ $path = &change_to_SM_path($user_theme_path[$count]);
+ }
+ print CF "\$user_themes[$count]['PATH'] = " . $path . ";\n";
+ # escape theme name so it can contain single quotes.
+ $esc_name = $user_theme_name[$count];
+ $esc_name =~ s/\\/\\\\/g;
+ $esc_name =~ s/'/\\'/g;
+ print CF "\$user_themes[$count]['NAME'] = '$esc_name';\n";
+ }
+ print CF "\n";
- # all plugins are strings
- for ( $ct = 0 ; $ct <= $#plugins ; $ct++ ) {
- print CF "\$plugins[] = '$plugins[$ct]';\n";
+ if ( $icon_theme_def eq '' ) { $icon_theme_def = '0'; }
+ print CF "\$icon_theme_def = $icon_theme_def;\n";
+ if ( $icon_theme_fallback eq '' ) { $icon_theme_fallback = '0'; }
+ print CF "\$icon_theme_fallback = $icon_theme_fallback;\n";
+
+ for ( $count = 0 ; $count <= $#icon_theme_name ; $count++ ) {
+ $path = $icon_theme_path[$count];
+ if ($path eq 'none' || $path eq 'template') {
+ $path = "'".$path."'";
+ } else {
+ $path = &change_to_SM_path($icon_theme_path[$count]);
+ }
+ print CF "\$icon_themes[$count]['PATH'] = " . $path . ";\n";
+ # escape theme name so it can contain single quotes.
+ $esc_name = $icon_theme_name[$count];
+ $esc_name =~ s/\\/\\\\/g;
+ $esc_name =~ s/'/\\'/g;
+ print CF "\$icon_themes[$count]['NAME'] = '$esc_name';\n";
}
print CF "\n";
- # strings
- print CF "\$theme_css = " . &change_to_SM_path($theme_css) . ";\n";
- if ( $theme_default eq '' ) { $theme_default = '0'; }
- print CF "\$theme_default = $theme_default;\n";
+ if ( $templateset_default eq '' ) { $templateset_default = 'default'; }
+ print CF "\$templateset_default = '$templateset_default';\n";
- for ( $count = 0 ; $count <= $#theme_name ; $count++ ) {
- print CF "\$theme[$count]['PATH'] = " . &change_to_SM_path($theme_path[$count]) . ";\n";
+ if ( $templateset_fallback eq '' ) { $templateset_fallback = 'default'; }
+ print CF "\$templateset_fallback = '$templateset_fallback';\n";
+
+ for ( $count = 0 ; $count <= $#templateset_name ; $count++ ) {
+ print CF "\$aTemplateSet[$count]['ID'] = '" . $templateset_id[$count] . "';\n";
# escape theme name so it can contain single quotes.
- $esc_name = $theme_name[$count];
+ $esc_name = $templateset_name[$count];
$esc_name =~ s/\\/\\\\/g;
$esc_name =~ s/'/\\'/g;
- print CF "\$theme[$count]['NAME'] = '$esc_name';\n";
+ print CF "\$aTemplateSet[$count]['NAME'] = '$esc_name';\n";
+ }
+ print CF "\n";
+
+
+ # integer
+ print CF "\$default_fontsize = '$default_fontsize';\n";
+ # string
+ print CF "\$default_fontset = '$default_fontset';\n";
+ print CF "\n";
+ # assoc. array (maybe initial value should be set somewhere else)
+ print CF '$fontsets = array();'."\n";
+ while (($fontset_name, $fontset_value) = each(%fontsets)) {
+ print CF "\$fontsets\['$fontset_name'\] = '$fontset_value';\n";
}
print CF "\n";
print CF "\$default_use_javascript_addr_book = $default_use_javascript_addr_book;\n";
for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
print CF "\$ldap_server[$count] = array(\n";
- # string
+ # string
print CF " 'host' => '$ldap_host[$count]',\n";
- # string
+ # string
print CF " 'base' => '$ldap_base[$count]'";
if ( $ldap_name[$count] ) {
print CF ",\n";
- # string
+ # string
print CF " 'name' => '$ldap_name[$count]'";
}
if ( $ldap_port[$count] ) {
print CF ",\n";
- # integer
+ # integer
print CF " 'port' => $ldap_port[$count]";
}
if ( $ldap_charset[$count] ) {
print CF ",\n";
- # string
+ # string
print CF " 'charset' => '$ldap_charset[$count]'";
}
if ( $ldap_maxrows[$count] ) {
print CF ",\n";
- # integer
+ # integer
print CF " 'maxrows' => $ldap_maxrows[$count]";
}
# string
}
if ( $ldap_protocol[$count] ) {
print CF ",\n";
- # integer
+ # integer
print CF " 'protocol' => $ldap_protocol[$count]";
}
if ( $ldap_limit_scope[$count] ) {
# boolean
print CF " 'limit_scope' => $ldap_limit_scope[$count]";
}
+ if ( $ldap_listing[$count] ) {
+ print CF ",\n";
+ # boolean
+ print CF " 'listing' => $ldap_listing[$count]";
+ }
+ if ( $ldap_writeable[$count] ) {
+ print CF ",\n";
+ # boolean
+ print CF " 'writeable' => $ldap_writeable[$count]";
+ }
+ if ( $ldap_search_tree[$count] ) {
+ print CF ",\n";
+ # integer
+ print CF " 'search_tree' => $ldap_search_tree[$count]";
+ }
+ if ( $ldap_listing[$count] ) {
+ print CF ",\n";
+ # boolean
+ print CF " 'starttls' => $ldap_starttls[$count]";
+ }
print CF "\n";
print CF ");\n";
print CF "\n";
}
- # string
+ # string
print CF "\$addrbook_dsn = '$addrbook_dsn';\n";
- # string
+ # string
print CF "\$addrbook_table = '$addrbook_table';\n\n";
- # string
+ # string
print CF "\$prefs_dsn = '$prefs_dsn';\n";
- # string
+ # string
print CF "\$prefs_table = '$prefs_table';\n";
- # string
+ # string
print CF "\$prefs_user_field = '$prefs_user_field';\n";
- # string
+ # integer
+ print CF "\$prefs_user_size = $prefs_user_size;\n";
+ # string
print CF "\$prefs_key_field = '$prefs_key_field';\n";
- # string
- print CF "\$prefs_val_field = '$prefs_val_field';\n\n";
- # string
+ # integer
+ print CF "\$prefs_key_size = $prefs_key_size;\n";
+ # string
+ print CF "\$prefs_val_field = '$prefs_val_field';\n";
+ # integer
+ print CF "\$prefs_val_size = $prefs_val_size;\n\n";
+ # string
print CF "\$addrbook_global_dsn = '$addrbook_global_dsn';\n";
- # string
+ # string
print CF "\$addrbook_global_table = '$addrbook_global_table';\n";
- # boolean
+ # boolean
print CF "\$addrbook_global_writeable = $addrbook_global_writeable;\n";
- # boolean
+ # boolean
print CF "\$addrbook_global_listing = $addrbook_global_listing;\n\n";
- # string
+ # string
print CF "\$abook_global_file = '$abook_global_file';\n";
- # boolean
+ # boolean
print CF "\$abook_global_file_writeable = $abook_global_file_writeable;\n\n";
- # boolean
+ # boolean
print CF "\$abook_global_file_listing = $abook_global_file_listing;\n\n";
- # boolean
+ # integer
+ print CF "\$abook_file_line_length = $abook_file_line_length;\n\n";
+ # boolean
print CF "\$no_list_for_subscribe = $no_list_for_subscribe;\n";
- # string
- print CF "\$smtp_auth_mech = '$smtp_auth_mech';\n";
- # string
- print CF "\$imap_auth_mech = '$imap_auth_mech';\n";
- # boolean
- print CF "\$use_imap_tls = $use_imap_tls;\n";
- # boolean
- print CF "\$use_smtp_tls = $use_smtp_tls;\n";
- # string
- print CF "\$session_name = '$session_name';\n";
-
- print CF "\n";
-
- # boolean
- print CF "\$advanced_tree = $advanced_tree;\n";
- print CF "\n";
- # boolean
- print CF "\$use_iframe = $use_iframe;\n";
- print CF "\n";
- # boolean
- print CF "\$use_icons = $use_icons;\n";
- print CF "\n";
- # boolean
- print CF "\$use_php_recode = $use_php_recode;\n";
- print CF "\n";
- # boolean
- print CF "\$use_php_iconv = $use_php_iconv;\n";
- print CF "\n";
- # boolean
- print CF "\$allow_remote_configtest = $allow_remote_configtest;\n";
- print CF "\n";
-
- print CF "\@include SM_PATH . 'config/config_local.php';\n";
-
- print CF "\n/**\n";
- print CF " * Make sure there are no characters after the PHP closing\n";
- print CF " * tag below (including newline characters and whitespace).\n";
- print CF " * Otherwise, that character will cause the headers to be\n";
- print CF " * sent and regular output to begin, which will majorly screw\n";
- print CF " * things up when we try to send more headers later.\n";
- print CF " */\n";
- print CF "?>";
+ # string
+ print CF "\$smtp_auth_mech = '$smtp_auth_mech';\n";
+ print CF "\$smtp_sitewide_user = '". quote_single($smtp_sitewide_user) ."';\n";
+ print CF "\$smtp_sitewide_pass = '". quote_single($smtp_sitewide_pass) ."';\n";
+ # string
+ print CF "\$imap_auth_mech = '$imap_auth_mech';\n";
+ # boolean
+ print CF "\$use_imap_tls = $use_imap_tls;\n";
+ # boolean
+ print CF "\$use_smtp_tls = $use_smtp_tls;\n";
+ # string
+ print CF "\$session_name = '$session_name';\n";
+ # boolean
+ print CF "\$only_secure_cookies = $only_secure_cookies;\n";
+
+ print CF "\n";
+
+ # boolean
+ print CF "\$use_iframe = $use_iframe;\n";
+ # boolean
+ print CF "\$ask_user_info = $ask_user_info;\n";
+ # boolean
+ print CF "\$use_icons = $use_icons;\n";
+ print CF "\n";
+ # boolean
+ print CF "\$use_php_recode = $use_php_recode;\n";
+ # boolean
+ print CF "\$use_php_iconv = $use_php_iconv;\n";
+ print CF "\n";
+ # boolean
+ print CF "\$allow_remote_configtest = $allow_remote_configtest;\n";
+ print CF "\$secured_config = $secured_config;\n";
+ # (binary) integer or constant - convert integer
+ # values to constants before output
+ $sm_debug_mode = convert_debug_binary_integer_to_constants($sm_debug_mode);
+ print CF "\$sm_debug_mode = $sm_debug_mode;\n";
+ print CF "\n";
close CF;
print "Data saved in config.php\n";
+
+ build_plugin_hook_array();
+
} else {
print "Error saving config.php: $!\n";
}
$continue = 0;
while ( $continue != 1 ) {
print "Please select your IMAP server:\n";
- print " courier = Courier IMAP server\n";
- print " cyrus = Cyrus IMAP server\n";
- print " dovecot = Dovecot Secure IMAP server\n";
- print " exchange = Microsoft Exchange IMAP server\n";
- print " hmailserver = hMailServer\n";
- print " macosx = Mac OS X Mailserver\n";
- print " mercury32 = Mercury/32\n";
- print " uw = University of Washington's IMAP server\n";
+ print $list_supported_imap_servers;
print "\n";
print " quit = Do not change anything\n";
print "\n";
$server = <STDIN>;
$server =~ s/[\r\n]//g;
+ # variable is used to display additional messages.
+ $message = "";
+
print "\n";
if ( $server eq "cyrus" ) {
$imap_server_type = "cyrus";
$disp_default_folder_prefix = "<none>";
$force_username_lowercase = false;
+ # Delimiter might differ if unixhierarchysep is set to yes.
+ $message = "\nIf you have enabled unixhierarchysep, you must change delimiter and special folder names.\n";
+
$continue = 1;
} elsif ( $server eq "uw" ) {
$imap_server_type = "uw";
$optional_delimiter = "detect";
$disp_default_folder_prefix = "<none>";
+ $continue = 1;
+ } elsif ( $server eq "bincimap" ) {
+ $imap_server_type = "bincimap";
+ $default_folder_prefix = "INBOX/";
+ $trash_folder = "Trash";
+ $sent_folder = "Sent";
+ $draft_folder = "Drafts";
+ $show_prefix_option = false;
+ $default_sub_of_inbox = false;
+ $show_contain_subfolders_option = false;
+ $delete_folder = true;
+ $force_username_lowercase = false;
+ $optional_delimiter = "detect";
+ $disp_default_folder_prefix = $default_folder_prefix;
+
+ # Default folder prefix depends on used depot.
+ $message = "\nIf you use IMAPdir depot, you must set default folder prefix to empty string.\n";
+
$continue = 1;
} elsif ( $server eq "quit" ) {
$continue = 1;
print " optional_delimiter = $optional_delimiter\n";
print " delete_folder = $delete_folder\n";
print " force_username_lowercase = $force_username_lowercase\n";
+
+ print "$message";
}
print "\nPress enter to continue...";
$tmp = <STDIN>;
my $new_path = $old_path;
if ( $old_path =~ /^SM_PATH/ ) {
+ # FIXME: the following replacement loses the opening quote mark!
$new_path =~ s/^SM_PATH . \'/\.\.\//;
$new_path =~ s/\.\.\/config\///;
}
return $new_path;
}
-sub detect_auth_support {
# Attempts to auto-detect if a specific auth mechanism is supported.
# Called by 'command112a' and 'command112b'
# ARGS: service-name (IMAP or SMTP), host:port, mech-name (ie. CRAM-MD5)
-
+sub detect_auth_support {
+ # Try loading IO::Socket
+ unless (eval("use IO::Socket; 1")) {
+ print "Perl IO::Socket module is not available.";
+ return undef;
+ }
# Misc setup
- use IO::Socket;
my $service = shift;
my $host = shift;
my $mech = shift;
# So at this point, we have a response, and it is (hopefully) valid.
if ($service eq 'SMTP') {
- if (($response =~ /^535/) or ($response =~/^502/)) {
+ if (!($response =~ /^334/)) {
# Not supported
print $sock $logout;
close $sock;
return 'NO';
- } elsif ($response =~ /^503/) {
- #Something went wrong
- return undef;
}
} elsif ($service eq 'IMAP') {
if ($response =~ /^A01/) {
return 'YES';
}
+# trims whitespace
+# Example code from O'Reilly Perl Cookbook
+sub trim {
+ my @out = @_;
+ for (@out) {
+ s/^\s+//;
+ s/\s+$//;
+ }
+ return wantarray ? @out : $out[0];
+}
+
sub clear_screen() {
if ( $^O =~ /^mswin/i) {
system "cls";
system "clear";
}
}
+
+# checks IMAP mailbox name. Refuses to accept 8bit folders
+# returns 0 (folder name is not correct) or 1 (folder name is correct)
+sub check_imap_folder($) {
+ my $folder_name = shift(@_);
+
+ if ($folder_name =~ /[\x80-\xFFFF]/) {
+ print "Folder name contains 8bit characters. Configuration utility requires\n";
+ print "UTF7-IMAP encoded folder names.\n";
+ print "Press enter to continue...";
+ my $tmp = <STDIN>;
+ return 0;
+ } elsif ($folder_name =~ /[&\*\%]/) {
+ # check for ampersand and list-wildcards
+ print "Folder name contains special UTF7-IMAP characters.\n";
+ print "Are you sure that folder name is correct? (y/N): ";
+ my $tmp = <STDIN>;
+ $tmp = lc(trim($tmp));
+ if ($tmp =~ /^y$/) {
+ return 1;
+ } else {
+ return 0;
+ }
+ } else {
+ return 1;
+ }
+}
+
+# quotes string written in single quotes
+sub quote_single($) {
+ my $string = shift(@_);
+ $string =~ s/\'/\\'/g;
+ return $string;
+}
+
+# determine a plugin's version number
+#
+# parses the setup.php file, looking for the
+# version string in the <plugin>_info() or the
+# <plugin>_version functions.
+#
+sub get_plugin_version() {
+
+ my $plugin_name = shift(@_);
+
+ $setup_file = '../plugins/' . $plugin_name . '/setup.php';
+ if ( -e "$setup_file" ) {
+ # Make sure that file is readable
+ if (! -r "$setup_file") {
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"$setup_file\" was found, but you don't\n";
+ print "have rights to read it. The plugin \"";
+ print $plugin_name . "\" may not work correctly until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+ next;
+ }
+
+ $version = ' ';
+# FIXME: grep the file instead of reading it into memory?
+ $whole_file = '';
+ open( FILE, "$setup_file" );
+ while ( $line = <FILE> ) {
+ $whole_file .= $line;
+ }
+ close(FILE);
+
+ # ideally, there is a version in the <plugin>_info function...
+ #
+ if ($whole_file =~ /('version'\s*=>\s*['"](.*?)['"])/) {
+ $version .= $2;
+
+ # this assumes there is only one function that returns
+ # a static string in the setup file
+ #
+ } elsif ($whole_file =~ /(return\s*['"](.*?)['"])/) {
+ $version .= $2;
+ }
+
+ return $version;
+
+ } else {
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"$setup_file\" was not found.\n";
+ print "The plugin \"" . $plugin_name;
+ print "\" may not work correctly until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+ next;
+ }
+
+}
+
+# determine a plugin's English name
+#
+# parses the setup.php file, looking for the
+# English name in the <plugin>_info() function.
+#
+sub get_plugin_english_name() {
+
+ my $plugin_name = shift(@_);
+
+ $setup_file = '../plugins/' . $plugin_name . '/setup.php';
+ if ( -e "$setup_file" ) {
+ # Make sure that file is readable
+ if (! -r "$setup_file") {
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"$setup_file\" was found, but you don't\n";
+ print "have rights to read it. The plugin \"";
+ print $plugin_name . "\" may not work correctly until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+ next;
+ }
+
+ $english_name = '';
+# FIXME: grep the file instead of reading it into memory?
+ $whole_file = '';
+ open( FILE, "$setup_file" );
+ while ( $line = <FILE> ) {
+ $whole_file .= $line;
+ }
+ close(FILE);
+
+ # the English name is in the <plugin>_info function or nothing...
+ #
+ if ($whole_file =~ /('english_name'\s*=>\s*['"](.*?)['"])/) {
+ $english_name .= $2;
+ }
+
+ return $english_name;
+
+ } else {
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"$setup_file\" was not found.\n";
+ print "The plugin \"" . $plugin_name;
+ print "\" may not work correctly until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+ next;
+ }
+
+}
+
+# parses the setup.php files for all activated plugins and
+# builds static plugin hooks array so we don't have to load
+# ALL plugins are runtime and build the hook array on every
+# page request
+#
+# hook array is saved in config/plugin_hooks.php
+#
+# Note the $verbose variable at the top of this routine
+# can be set to zero to quiet it down.
+#
+# NOTE/FIXME: we aren't necessarily interested in writing
+# a full-blown PHP parsing engine, so plenty
+# of assumptions are included herein about the
+# coding of the plugin setup files, and things
+# like commented out curly braces or other
+# such oddities can break this in a bad way.
+#
+sub build_plugin_hook_array() {
+
+ $verbose = 1;
+
+ if ($verbose) {
+ print "\n\n";
+ }
+
+ if ( open( HOOKFILE, ">plugin_hooks.php" ) ) {
+ print HOOKFILE "<?php\n";
+ print HOOKFILE "\n";
+
+ print HOOKFILE "/**\n";
+ print HOOKFILE " * SquirrelMail Plugin Hook Registration File\n";
+ print HOOKFILE " * Auto-generated using the configure script, conf.pl\n";
+ print HOOKFILE " */\n";
+ print HOOKFILE "\n";
+ print HOOKFILE "global \$squirrelmail_plugin_hooks;\n";
+ print HOOKFILE "\n";
+
+PLUGIN: for ( $ct = 0 ; $ct <= $#plugins ; $ct++ ) {
+
+ if ($verbose) {
+ print "Activating plugin \"" . $plugins[$ct] . "\"...\n";
+ }
+
+ $setup_file = '../plugins/' . $plugins[$ct] . '/setup.php';
+ if ( -e "$setup_file" ) {
+ # Make sure that file is readable
+ if (! -r "$setup_file") {
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"$setup_file\" was found, but you don't\n";
+ print "have rights to read it. The plugin \"";
+ print $plugins[$ct] . "\" will not be activated until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+ next;
+ }
+ open( FILE, "$setup_file" );
+ $inside_init_fxn = 0;
+ $brace_count = 0;
+ while ( $line = <FILE> ) {
+
+ # throw away lines until we get to target function
+ #
+ if (!$inside_init_fxn
+ && $line !~ /^\s*function\s*squirrelmail_plugin_init_/i) {
+ next;
+ }
+ $inside_init_fxn = 1;
+
+
+ # count open braces
+ #
+ if ($line =~ /{/) {
+ $brace_count++;
+ }
+
+
+ # count close braces
+ #
+ if ($line =~ /}/) {
+ $brace_count--;
+
+ # leaving <plugin>_init() function...
+ if ($brace_count == 0) {
+ close(FILE);
+ next PLUGIN;
+ }
+
+ }
+
+
+ # throw away lines that are not exactly one "brace set" deep
+ #
+ if ($brace_count > 1) {
+ next;
+ }
+
+
+ # also not interested in lines that are not
+ # hook registration points
+ #
+ if ($line !~ /^\s*\$squirrelmail_plugin_hooks/i) {
+ next;
+ }
+
+
+ # if $line does not have an ending semicolon,
+ # we need to recursively read in subsequent
+ # lines until we find one
+ while ( $line !~ /;\s*$/ ) {
+ $line =~ s/[\n\r]\s*$//;
+ $line .= <FILE>;
+ }
+
+
+ $line =~ s/^\s+//;
+ $line =~ s/^\$//;
+ $var = $line;
+
+ $var =~ s/=/EQUALS/;
+ if ( $var =~ /^([a-z])/i ) {
+ @options = split ( /\s*EQUALS\s*/, $var );
+ $options[1] =~ s/[\n\r]//g;
+ $options[1] =~ s/[\'\"];\s*$//;
+ $options[1] =~ s/;$//;
+ $options[1] =~ s/^[\'\"]//;
+ # de-escape escaped strings
+ $options[1] =~ s/\\'/'/g;
+ $options[1] =~ s/\\\\/\\/g;
+
+ if ( $options[0] =~ /^squirrelmail_plugin_hooks\s*\[\s*['"]([a-z0-9 \/._*-]+)['"]\s*\]\s*\[\s*['"]([0-9a-z._-]+)['"]\s*\]/i ) {
+ $hook_name = $1;
+ $hooked_plugin_name = $2;
+ # Note: if we wanted to stop plugins from registering
+ # a *different* plugin on a hook, we could catch
+ # it here, however this has actually proven to be
+ # a useful *feature*
+ #if ($hooked_plugin_name ne $plugins[$ct]) {
+ # print "...plugin is tring to hook in under different name...\n";
+ #}
+
+#FIXME: do we want to count the number of hook registrations for each plugin and warn if a plugin doesn't have any?
+ # hook registration has been found!
+ if ($verbose) {
+ if ($hooked_plugin_name ne $plugins[$ct]) {
+ print " registering on hook \"" . $hook_name . "\" (as \"$hooked_plugin_name\" plugin)\n";
+ } else {
+ print " registering on hook \"" . $hook_name . "\"\n";
+ }
+ }
+ $line =~ s/ {2,}/ /g;
+ $line =~ s/=/\n =/;
+ print HOOKFILE "\$$line";
+
+ }
+
+ }
+
+ }
+ close(FILE);
+
+ } else {
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"$setup_file\" was not found.\n";
+ print "The plugin \"" . $plugins[$ct];
+ print "\" will not be activated until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+ next;
+ }
+
+ }
+
+ print HOOKFILE "\n\n";
+ close(HOOKFILE);
+# if ($verbose) {
+ print "\nDone activating plugins; registration data saved in plugin_hooks.php\n\n";
+# }
+
+ } else {
+
+ print "\n";
+ print "WARNING:\n";
+ print "The file \"plugin_hooks.php\" was not able to be written to.\n";
+ print "No plugins will be activated until you fix this.\n";
+ print "\nPress enter to continue";
+ $ctu = <STDIN>;
+ print "\n";
+
+ }
+
+}
+
+# converts (binary) integer values that correspond
+# to the SquirrelMail debug mode constants (see
+# include/constants.php) into those constant strings
+# (bitwise or'd if more than one is enabled)
+#
+# if the value passed in is not an integer, it is
+# returned unmolested
+#
+sub convert_debug_binary_integer_to_constants() {
+
+ my ($debug_mode) = @_;
+ if ($debug_mode =~ /^[^0-9]/) {
+ return $debug_mode;
+ }
+ $debug_mode = int($debug_mode);
+ $new_debug_mode = '';
+
+ # per include/constants.php, here are their values:
+ #
+ # 0 SM_DEBUG_MODE_OFF
+ # 1 SM_DEBUG_MODE_SIMPLE
+ # 512 SM_DEBUG_MODE_MODERATE
+ # 524288 SM_DEBUG_MODE_ADVANCED
+ # 536870912 SM_DEBUG_MODE_STRICT
+ #
+ if ($debug_mode & 1) {
+ $new_debug_mode .= ' | SM_DEBUG_MODE_SIMPLE';
+ }
+ if ($debug_mode & 512) {
+ $new_debug_mode .= ' | SM_DEBUG_MODE_MODERATE';
+ }
+ if ($debug_mode & 524288) {
+ $new_debug_mode .= ' | SM_DEBUG_MODE_ADVANCED';
+ }
+ if ($debug_mode & 536870912) {
+ $new_debug_mode .= ' | SM_DEBUG_MODE_STRICT';
+ }
+
+ $new_debug_mode =~ s/^ \| //;
+ if (!$new_debug_mode) {
+ $new_debug_mode = 'SM_DEBUG_MODE_OFF';
+ }
+
+ return $new_debug_mode;
+}
+
+# converts SquirrelMail debug mode constants (see
+# include/constants.php) into their corresponding
+# (binary) integer values
+#
+# if the value passed in is an integer already, it
+# is returned unmolested
+#
+sub convert_debug_constants_to_binary_integer() {
+
+ my ($debug_mode) = @_;
+ if ($debug_mode =~ /^[0-9]/) {
+ return $debug_mode;
+ }
+ $new_debug_mode = 0;
+
+ # per include/constants.php, here are their values:
+ #
+ # 0 SM_DEBUG_MODE_OFF
+ # 1 SM_DEBUG_MODE_SIMPLE
+ # 512 SM_DEBUG_MODE_MODERATE
+ # 524288 SM_DEBUG_MODE_ADVANCED
+ # 536870912 SM_DEBUG_MODE_STRICT
+ #
+ if ($debug_mode =~ /\bSM_DEBUG_MODE_OFF\b/) {
+ $new_debug_mode = 0;
+ }
+ if ($debug_mode =~ /\bSM_DEBUG_MODE_SIMPLE\b/) {
+ $new_debug_mode |= 1;
+ }
+ if ($debug_mode =~ /\bSM_DEBUG_MODE_MODERATE\b/) {
+ $new_debug_mode |= 512;
+ }
+ if ($debug_mode =~ /\bSM_DEBUG_MODE_ADVANCED\b/) {
+ $new_debug_mode |= 524288;
+ }
+ if ($debug_mode =~ /\bSM_DEBUG_MODE_STRICT\b/) {
+ $new_debug_mode |= 536870912;
+ }
+
+ return $new_debug_mode;
+}
+
+# Function to print n column numbered lists
+#
+# WARNING: the names in the list will be truncated
+# to fit in their respective columns based on the
+# screen width and number of columns.
+#
+# Expected arguments (in this order):
+#
+# * The start number to use for the list
+# * The number of columns to use
+# * The screen width
+# * Boolean (zero/one), indicating
+# whether or not to show item numbers
+# * The list of strings to be shown
+#
+# Returns: The number printed on screen of the last item in the list
+#
+sub print_multi_col_list {
+ my ($num, $cols, $screen_width, $show_numbering, @list) = @_;
+ my $x;
+ my $col_cnt = 0;
+ my $row_cnt = 0;
+ my $rows;
+ my $col_width;
+ my $total = 0;
+ my @layout = ();
+ my @numbers = ();
+
+ $rows = int(@list / $cols);
+ if (@list % $cols) { $rows++; }
+ if ($show_numbering) { $col_width = int(($screen_width - 2) / $cols) - 5; }
+ else { $col_width = int(($screen_width - 2) / $cols) - 2; }
+
+ # build the layout array so numbers run down each column
+ #
+ for ( $x = 0; $x < @list; $x++ ) {
+
+ $layout[$row_cnt][$col_cnt] = $list[$x];
+ $numbers[$row_cnt][$col_cnt] = $num++;
+
+ # move to next column
+ #
+ if ($row_cnt == $rows - 1) {
+ $row_cnt = 0;
+ $col_cnt++;
+ }
+ else { $row_cnt++; }
+
+ }
+
+ # if we filled up fewer rows than needed, recalc column width
+ #
+ if ($rows * $col_cnt == @list) { $col_cnt--; } # loop above ended right after increment
+ if ($col_cnt + 1 < $cols) {
+ if ($show_numbering) { $col_width = int(($screen_width - 2) / ($col_cnt + 1)) - 5; }
+ else { $col_width = int(($screen_width - 2) / ($col_cnt + 1)) - 2; }
+ }
+
+ # print it
+ # iterate rows
+ #
+ for ( $row_cnt = 0; $row_cnt <= $rows; $row_cnt++ ) {
+
+ # indent the row
+ #
+ print " ";
+
+ # iterate columns for this row
+ #
+ for ( $col_cnt = 0; $col_cnt <= $cols; $col_cnt++ ) {
+ if ($layout[$row_cnt][$col_cnt]) {
+ print " ";
+ if ($show_numbering) { printf "$WHT% 2u.$NRM", $numbers[$row_cnt][$col_cnt]; }
+ printf " %-$col_width." . $col_width . "s", $layout[$row_cnt][$col_cnt];
+ }
+ }
+ print "\n";
+ }
+
+
+ return $num - 1;
+}
+