-Sorry for the incomplete documentation at this time. Here is a quick
-overview of how to install SquirrelMail.
+Installing SquirrelMail
+=======================
+
+Table of Contents:
+ 0. (QUICK!) Quick install guide
+ 1. (PHP4) Configure your webserver to work with PHP4
+ 2. (IMAP) Setting up IMAP (not covered)
+ 3. (INSTALL) Obtaining and installing SquirrelMail
+ 4. (RUN) Running SquirrelMail
+ 5. (CHARSETS) Russian Charsets
+ 6. (LOCALES) Translations of SquirrelMail
+
+
+0. QUICK INSTALL GUIDE
+----------------------
+
+Each of these steps is covered in detail below.
+
+- Install webserver and PHP4 (at least 4.1.0).
+- Install IMAP server (see docs of that server).
+- Unpack the SquirrelMail package in a web-accessible location.
+- Select a data-dir and attachment dir, outside the webtree (e.g. in /var).
+ The data-dir (for user prefs) should be owned by the user the webserver
+ runs as (eg www-data). The attachment dir (for uploading files as
+ attachments) should be file mode 0730 and in the same group as the
+ webserver.
+- Run config/conf.pl from the command line. Use the D option to load
+ predefined options for specific IMAP servers, and edit at least the
+ Server Settings and General Options (datadir).
+- Browse to http://www.example.com/yourwebmaillocation/src/configtest.php
+ to test your configuration for common errors.
+- Browse to http://www.example.com/yourwebmaillocation/ to log in.
+
1. CONFIGURE YOUR WEBSERVER TO WORK WITH PHP4
---------------------------------------------
- If your webserver does not already have PHP4 you must configure it
- to work with PHP4. SquirrelMail uses the standard suffix .php for
- all PHP4 files. This is a quick and dirty guide to installing PHP4
- to run as CGI under Apache. How you end up doing this is up to you
- (your mileage may vary).
-
-a. Obtaining and compiling PHP4
-
- Point your favorite webserver at http://www.php.net/version4/ and
- download the source. Untar (tar xvfz filename-you-downloaded.tgz)
- the source, cd into the directory and run configure. To make PHP4
- work with SquirrelMail a commandline like this should do:
-
- ./configure --enable-track-vars --enable-force-cgi-redirect --with-gettext
+ If your webserver does not already have PHP you must configure it
+ to work with PHP. You need at least PHP v4.1.0. SquirrelMail uses
+ the standard suffix .php for all PHP4 files.
- If you have a database like MySQL you might want to add something
- like --with-mysql to get database functionality.
+ You can find PHP at http://www.php.net. See the documentation that
+ comes with PHP for instructions how to set it up.
- Run make to build the binary file. This will generate a binary file
- called "php". Move this file into a CGI-directory.
+ The PHP IMAP extension is NOT neccessary at all (but won't harm)!
+ Below is a list of optional PHP extensions:
- You might also want to read the INSTALL file in the PHP-distribution
- :-)
+ --with-ldap Required for LDAP addressbooks
+ --with-mhash Will improve charset decoding if present
+ --with-mysql For MySQL storage of preferences or addressbooks
+ --with-openssl When you want to use encrypted IMAP connections (TLS)
-b. Setting up .php files to use PHP4
+ If you're going to use LDAP in the addressbook, you must compile PHP
+ with the LDAP extension. Include the MHASH extension to improve
+ performance in character set decoding.
- You need to create a .htaccess file in you SquirrelMail directory
- that looks something like this:
+ If you want your users to attach files to their mails, make sure
+ File Uploads in php.ini is set to On.
- AddType application/php4script .php
- Action application/php4script /cgi-bin/php
-
- You could also add these lines to your Apache configuration file.
-
-c. Running into trouble
-
- Setting up Apache with PHP4 can be a non-trivial task. Read the PHP4
- and Apache documentation carefully if you run into trouble. If you
- have an experienced system administrator around ask her/him to help
- you.
2. SETTING UP IMAP
------------------
- This is not covered here :-/
+ This depends a lot on the server your choose. See the documentation
+ that comes with your server.
+
+ If you're concerned about people accessing it directly, you can
+ limit access to only the IP of the webserver.
+
3. OBTAINING AND INSTALLING SQUIRRELMAIL
----------------------------------------
- SquirrelMail is still under development. Therefore you should always
- get the newest version around. Look at
- http://squirrelmail.sourceforge.net/index.php3?page=5 to see what it
- is. If you want to be bleeding edge you might want to consider using
- the latest CVS version (with the latest and most fashionable of
- bugs).
+ SquirrelMail is constantly being improved. Therefore you should always
+ get the newest version around. Look at http://www.squirrelmail.org
+ to see what it is. If you want to be bleeding edge you might want to
+ consider using the latest CVS version (with the latest and most
+ fashionable bugs).
a. Download SquirrelMail
The data directory is used for storing user preferences, like
signature, name and theme. When unpacking the sources this directory
- is created as data/ in you SquirrelMail directory. This directory
+ is created as data/ in your SquirrelMail directory. This directory
must be writable by the webserver. If your webserver is running as
- the user nobody you can fix this by running:
+ the user "nobody" you can fix this by running:
+
+ $ chown -R nobody data
+ $ chgrp -R nobody data
+
+ Keep in mind that with different installations, the web server could
+ typically run as userid/groupid of nobody/nobody, nobody/nogroup,
+ apache/apache or www-data/www-data. The best way to find out is to read
+ the web server's configuration file.
- chown -R nobody data
- chgrp -R nobody data
-
There also needs to be a directory where attachments are stored
before they are sent. Since personal mail is stored in this
directory you might want to be a bit careful about how you set it
permissions. You could do this by running these commands (still
granted that the webserver is running as nobody/nobody)
- cd /var/some/place
- mkdir SomeDirectory
- chgrp -R nobody SomeDirectory
- chmod 730 SomeDirectory
+ $ cd /var/some/place
+ $ mkdir SomeDirectory
+ $ chgrp -R nobody SomeDirectory
+ $ chmod 730 SomeDirectory
If you trust all the users on you system not to read mail they are
not supposed to read change the last line to chmod 777 SomeDirectory
- or simply use /tmp as you attachments directory. If a user is
- aborting a mail but has uploaded som attachments to it the files
- will be lying around in this directory forever if you do not remove
- them.
+ or simply use /tmp as you attachments directory.
+
+ If a user is aborting a mail but has uploaded some attachments to it
+ the files will be lying around in this directory forever if you do not
+ remove them. To fix this, it is recommended to create a cron job that
+ deletes everything in the attachment directory. Something similar
+ to the following will be good enough:
+
+ $ cd /var/attach/directory
+ $ rm -f *
+
+ However, this will delete attachments that are currently in use by people
+ sending email when the cron job runs. You can either (1) make sure that
+ the cron job runs at an obscure hour and hope that nobody gets upset, or
+ (2) you can run a modified version of the commands above. Check out the
+ man pages for other commands such as 'find' or 'tmpreaper'.
+
+ One sample script you could set up that would erase all attachments, but
+ wouldn't erase preferences, address books, or the like (just in case your
+ attachment directory is the same as your data directory) might look like
+ this:
+
+ $ rm `find /var/attach/directory -atime +2 | grep -v "\." | grep -v _`
+
+ Remember to be careful with whatever method you do use, and to test out
+ the command before it potentially wipes out everyone's preferences.
c. Setting up SquirrelMail
- All configuration directives you need to worry about in SquirrelMail
- is in the file config/config.php in you SquirrelMail directory. This
- file is pretty well commented.
+ There are two ways to configure SquirrelMail. In the config/ directory,
+ there is a perl script called conf.pl that will aid you in the
+ configuration process. This is the recommended way of handling
+ the config.
+
+ You can also copy the config/config_default.php file to config/config.php
+ and edit that manually.
+
+ After you've created a configuration, you can use your webbrowser to
+ browse to http://your-squirrelmail-location/src/configtest.php.
+ This will perform some basic checks on your config to make sure
+ everything works like it should.
+
4. RUNNING SQUIRRELMAIL
-----------------------
- Point your browser at the URL at which SquirrelMail is installed. It
- should be pretty stright forward to use. Some more documentation
- might show up onbe day or another.
\ No newline at end of file
+ Point your browser at the URL at which SquirrelMail is installed. A
+ possible example of this is:
+ http://www.yourdomain.com/squirrelmail
+
+ It should be pretty straight forward to use. Some more documentation
+ might show up one day or another.
+
+
+5. RUSSIAN CHARSETS
+-------------------
+
+ For information on how to make SquirrelMail work with Russian
+ Apache, see the README.russian_apache in the doc/ subdirectory.
+
+
+6. TRANSLATIONS
+---------------
+
+ In order to use translated versions of SquirrelMail, you need
+ to download and install locale packages that contain translations
+ that you want to use with SquirrelMail.
+
+ Locale packages can be downloaded from SquirrelMail SourceForge
+ project page.
+
+ http://sourceforge.net/project/showfiles.php?group_id=311&package_id=110388
+
+ Each translation contains install script that copies required files
+ into appropriate locations. If you can't run that script, you can extract
+ contents of translation packages into your SquirrelMail directory.
+
+ NOTE No.1: *-src.tar.gz, *-src.tar.bz2 and *-src.zip archives does not contain
+ compiled translation files. You will need to run compilelocales script
+ in order to get all gettext binary translations.
+
+ NOTE No.2: You might need to restart your webserver before using translations.
+ If you can't do that, install your translations _before_ you use SquirrelMail.