-function mime_parse_structure ($structure, $ent_id) {
-
- $msg = new message();
- if ($structure{0} == '(') {
- $ent_id = mime_new_element_level($ent_id);
- $start = $end = -1;
- do {
- $start = $end+1;
- $end = mime_match_parenthesis ($start, $structure);
-
- $element = substr($structure, $start+1, ($end - $start)-1);
- $ent_id = mime_increment_id ($ent_id);
- $newmsg = mime_parse_structure ($element, $ent_id);
- $msg->addEntity ($newmsg);
- } while ($structure{$end+1} == '(');
- } else {
- // parse the elements
- $msg = mime_get_element ($structure, $msg, $ent_id);
- }
- return $msg;
-}
-
-/* Increments the element ID. An element id can look like any of
- * the following: 1, 1.2, 4.3.2.4.1, etc. This function increments
- * the last number of the element id, changing 1.2 to 1.3.
- */
-function mime_increment_id ($id) {
-
- if (strpos($id, ".")) {
- $first = substr($id, 0, strrpos($id, "."));
- $last = substr($id, strrpos($id, ".")+1);
- $last++;
- $new = $first . "." .$last;
- } else {
- $new = $id + 1;
- }
-
- return $new;
-}
-
-/*
- * See comment for mime_increment_id().
- * This adds another level on to the entity_id changing 1.3 to 1.3.0
- * NOTE: 1.3.0 is not a valid element ID. It MUST be incremented
- * before it can be used. I left it this way so as not to have
- * to make a special case if it is the first entity_id. It
- * always increments it, and that works fine.
- */
-function mime_new_element_level ($id) {
-
- if (!$id) {
- $id = 0;
- } else {
- $id = $id . '.0';
- }
-
- return( $id );
-}
-
-function mime_get_element (&$structure, $msg, $ent_id) {
-
- $elem_num = 1;
- $msg->header = new msg_header();
- $msg->header->entity_id = $ent_id;
- $properties = array();
-
- while (strlen($structure) > 0) {
- $structure = trim($structure);
- $char = $structure{0};
-
- if (strtolower(substr($structure, 0, 3)) == 'nil') {
- $text = '';
- $structure = substr($structure, 3);
- } else if ($char == '"') {
- // loop through until we find the matching quote, and return that as a string
- $pos = 1;
- $text = '';
- while ( ($char = $structure{$pos} ) <> '"' && $pos < strlen($structure)) {
- $text .= $char;
- $pos++;
- }
- $structure = substr($structure, strlen($text) + 2);
- } else if ($char == '(') {
- // comment me
- $end = mime_match_parenthesis (0, $structure);
- $sub = substr($structure, 1, $end-1);
- $properties = mime_get_props($properties, $sub);
- $structure = substr($structure, strlen($sub) + 2);
- } else {
- // loop through until we find a space or an end parenthesis
- $pos = 0;
- $char = $structure{$pos};
- $text = '';
- while ($char != ' ' && $char != ')' && $pos < strlen($structure)) {
- $text .= $char;
- $pos++;
- $char = $structure{$pos};
- }
- $structure = substr($structure, strlen($text));
- }
-
- // This is where all the text parts get put into the header
- switch ($elem_num) {
- case 1:
- $msg->header->type0 = strtolower($text);
- break;
- case 2:
- $msg->header->type1 = strtolower($text);
- break;
- case 4: // Id
- // Invisimail enclose images with <>
- $msg->header->id = str_replace( '<', '', str_replace( '>', '', $text ) );
- break;
- case 5:
- $msg->header->description = $text;
- break;
- case 6:
- $msg->header->encoding = strtolower($text);
- break;
- case 7:
- $msg->header->size = $text;
- break;
- default:
- if ($msg->header->type0 == 'text' && $elem_num == 8) {
- // This is a plain text message, so lets get the number of lines
- // that it contains.
- $msg->header->num_lines = $text;
-
- } else if ($msg->header->type0 == 'message' && $msg->header->type1 == 'rfc822' && $elem_num == 8) {
- // This is an encapsulated message, so lets start all over again and
- // parse this message adding it on to the existing one.
- $structure = trim($structure);
- if ( $structure{0} == '(' ) {
- $e = mime_match_parenthesis (0, $structure);
- $structure = substr($structure, 0, $e);
- $structure = substr($structure, 1);
- $m = mime_parse_structure($structure, $msg->header->entity_id);
-
- // the following conditional is there to correct a bug that wasn't
- // incrementing the entity IDs correctly because of the special case
- // that message/rfc822 is. This fixes it fine.
- if (substr($structure, 1, 1) != '(')
- $m->header->entity_id = mime_increment_id(mime_new_element_level($ent_id));
-
- // Now we'll go through and reformat the results.
- if ($m->entities) {
- for ($i=0; $i < count($m->entities); $i++) {
- $msg->addEntity($m->entities[$i]);
- }
- } else {
- $msg->addEntity($m);
- }
- $structure = "";
- }
- }
- break;
- }
- $elem_num++;
- $text = "";
- }
- // loop through the additional properties and put those in the various headers
- if ($msg->header->type0 != 'message') {
- for ($i=0; $i < count($properties); $i++) {
- $msg->header->{$properties[$i]['name']} = $properties[$i]['value'];
- }
- }
-
- return $msg;
-}
-
-/*
- * I did most of the MIME stuff yesterday (June 20, 2000), but I couldn't
- * figure out how to do this part, so I decided to go to bed. I woke up
- * in the morning and had a flash of insight. I went to the white-board
- * and scribbled it out, then spent a bit programming it, and this is the
- * result. Nothing complicated, but I think my brain was fried yesterday.
- * Funny how that happens some times.
- *
- * This gets properties in a nested parenthesisized list. For example,
- * this would get passed something like: ("attachment" ("filename" "luke.tar.gz"))
- * This returns an array called $props with all paired up properties.
- * It ignores the "attachment" for now, maybe that should change later
- * down the road. In this case, what is returned is:
- * $props[0]["name"] = "filename";
- * $props[0]["value"] = "luke.tar.gz";
- */
-function mime_get_props ($props, $structure) {
-
- while (strlen($structure) > 0) {
- $structure = trim($structure);
- $char = $structure{0};
-
- if ($char == '"') {
- $pos = 1;
- $tmp = '';
- while ( ( $char = $structure{$pos} ) != '"' &&
- $pos < strlen($structure)) {
- $tmp .= $char;
- $pos++;
- }
- $structure = trim(substr($structure, strlen($tmp) + 2));
- $char = $structure{0};
-
- if ($char == '"') {
- $pos = 1;
- $value = '';
- while ( ( $char = $structure{$pos} ) != '"' &&
- $pos < strlen($structure) ) {
- $value .= $char;
- $pos++;
- }
- $structure = trim(substr($structure, strlen($tmp) + 2));
-
- $k = count($props);
- $props[$k]['name'] = strtolower($tmp);
- $props[$k]['value'] = $value;
- } else if ($char == '(') {
- $end = mime_match_parenthesis (0, $structure);
- $sub = substr($structure, 1, $end-1);
- if (! isset($props))
- $props = array();
- $props = mime_get_props($props, $sub);
- $structure = substr($structure, strlen($sub) + 2);
- }
- return $props;
- } else if ($char == '(') {
- $end = mime_match_parenthesis (0, $structure);
- $sub = substr($structure, 1, $end-1);
- $props = mime_get_props($props, $sub);
- $structure = substr($structure, strlen($sub) + 2);
- return $props;
- } else {
- return $props;
- }
- }
-}
-
-/*
- * Matches parenthesis. It will return the position of the matching
- * parenthesis in $structure. For instance, if $structure was:
- * ("text" "plain" ("val1name", "1") nil ... )
- * x x
- * then this would return 42 to match up those two.
- */
-function mime_match_parenthesis ($pos, $structure) {
-
- $j = strlen( $structure );
-
- // ignore all extra characters
- // If inside of a string, skip string -- Boundary IDs and other
- // things can have ) in them.
- if ( $structure{$pos} != '(' ) {
- return( $j );
- }
-
- while ( $pos < $j ) {
- $pos++;
- if ($structure{$pos} == ')') {
- return $pos;
- } elseif ($structure{$pos} == '"') {
- $pos++;
- while ( $structure{$pos} != '"' &&
- $pos < $j ) {
- if (substr($structure, $pos, 2) == '\\"') {
- $pos++;
- } elseif (substr($structure, $pos, 2) == '\\\\') {
- $pos++;
- }
- $pos++;
- }
- } elseif ( $structure{$pos} == '(' ) {
- $pos = mime_match_parenthesis ($pos, $structure);
- }
- }
- echo _("Error decoding mime structure. Report this as a bug!") . '<br>';
- return( $pos );
-}
-
-function mime_fetch_body($imap_stream, $id, $ent_id ) {