+ print "This is the port to connect to for SMTP. Usually 25.\n";
+ print "[$WHT$smtpPort$NRM]: $WHT";
+ $new_smtpPort = <STDIN>;
+ if ( $new_smtpPort eq "\n" ) {
+ $new_smtpPort = $smtpPort;
+ } else {
+ $new_smtpPort =~ s/[\r|\n]//g;
+ }
+ return $new_smtpPort;
+}
+
+# authenticated server
+sub command18 {
+ print "Do you wish to use an authenticated SMTP server? Your server must\n";
+ print "support this in order for SquirrelMail to work with it. We implemented\n";
+ print "it according to RFC 2554.\n";
+
+ $YesNo = 'n';
+ $YesNo = 'y' if ( lc($use_authenticated_smtp) eq "true" );
+
+ print "Use authenticated SMTP server (y/n) [$WHT$YesNo$NRM]: $WHT";
+
+ $new_use_authenticated_smtp = <STDIN>;
+ $new_use_authenticated_smtp =~ tr/yn//cd;
+ return "true" if ( $new_use_authenticated_smtp eq "y" );
+ return "false" if ( $new_use_authenticated_smtp eq "n" );
+ return $use_authenticated_smtp;
+}
+
+# imap_server_type
+sub command19 {
+ print "Each IMAP server has its own quirks. As much as we tried to stick\n";
+ print "to standards, it doesn't help much if the IMAP server doesn't follow\n";
+ print "the same principles. We have made some work-arounds for some of\n";
+ print "these servers. If you would like to use them, please select your\n";
+ print "IMAP server. If you do not wish to use these work-arounds, you can\n";
+ print "set this to \"other\", and none will be used.\n";
+ print " cyrus = Cyrus IMAP server\n";
+ print " uw = University of Washington's IMAP server\n";
+ print " exchange = Microsoft Exchange IMAP server\n";
+ print " courier = Courier IMAP server\n";
+ print " other = Not one of the above servers\n";
+ print "[$WHT$imap_server_type$NRM]: $WHT";
+ $new_imap_server_type = <STDIN>;
+
+ if ( $new_imap_server_type eq "\n" ) {
+ $new_imap_server_type = $imap_server_type;
+ } else {
+ $new_imap_server_type =~ s/[\r|\n]//g;
+ }
+ return $new_imap_server_type;
+}
+
+# invert_time
+sub command110 {
+ print "Sometimes the date of messages sent is messed up (off by a few hours\n";
+ print "on some machines). Typically this happens if the system doesn't support\n";
+ print "tm_gmtoff. It will happen only if your time zone is \"negative\".\n";
+ print "This most often occurs on Solaris 7 machines in the United States.\n";
+ print "By default, this is off. It should be kept off unless problems surface\n";
+ print "about the time that messages are sent.\n";
+ print " no = Do NOT fix time -- almost always correct\n";
+ print " yes = Fix the time for this system\n";
+
+ $YesNo = 'n';
+ $YesNo = 'y' if ( lc($invert_time) eq "true" );
+
+ print "Fix the time for this system (y/n) [$WHT$YesNo$NRM]: $WHT";
+
+ $new_invert_time = <STDIN>;
+ $new_invert_time =~ tr/yn//cd;
+ return "true" if ( $new_invert_time eq "y" );
+ return "false" if ( $new_invert_time eq "n" );
+ return $invert_time;
+}
+
+sub command111 {
+ print "This is the delimiter that your IMAP server uses to distinguish between\n";
+ print "folders. For example, Cyrus uses '.' as the delimiter and a complete\n";
+ print "folder would look like 'INBOX.Friends.Bob', while UW uses '/' and would\n";
+ print "look like 'INBOX/Friends/Bob'. Normally this should be left at 'detect'\n";
+ print "but if you are sure you know what delimiter your server uses, you can\n";
+ print "specify it here.\n";
+ print "\nTo have it autodetect the delimiter, set it to 'detect'.\n\n";
+ print "[$WHT$optional_delimiter$NRM]: $WHT";
+ $new_optional_delimiter = <STDIN>;
+
+ if ( $new_optional_delimiter eq "\n" ) {
+ $new_optional_delimiter = $optional_delimiter;
+ } else {
+ $new_optional_delimiter =~ s/[\r|\n]//g;
+ }
+ return $new_optional_delimiter;
+}
+
+# MOTD
+sub command71 {
+ print "\nYou can now create the welcome message that is displayed\n";
+ print "every time a user logs on. You can use HTML or just plain\n";
+ print
+"text. If you do not wish to have one, just make it blank.\n\n(Type @ on a blank line to exit)\n";
+
+ $new_motd = "";
+ do {
+ print "] ";
+ $line = <STDIN>;
+ $line =~ s/[\r|\n]//g;
+ if ( $line ne "@" ) {
+ $line =~ s/ /\ \ /g;
+ $line =~ s/\t/\ \ \ \ /g;
+ $line =~ s/$/ /;
+ $line =~ s/\'/\\\'/g;
+
+ $new_motd = $new_motd . $line;
+ }
+ } while ( $line ne "@" );
+ return $new_motd;
+}
+
+################# PLUGINS ###################
+
+sub command81 {
+ $command =~ s/[\s|\n|\r]*//g;
+ if ( $command > 0 ) {
+ $command = $command - 1;
+ if ( $command <= $#plugins ) {
+ @newplugins = ();
+ $ct = 0;
+ while ( $ct <= $#plugins ) {
+ if ( $ct != $command ) {
+ @newplugins = ( @newplugins, $plugins[$ct] );
+ }
+ $ct++;
+ }
+ @plugins = @newplugins;
+ } elsif ( $command <= $#plugins + $#unused_plugins + 1 ) {
+ $num = $command - $#plugins - 1;
+ @newplugins = @plugins;
+ $ct = 0;
+ while ( $ct <= $#unused_plugins ) {
+ if ( $ct == $num ) {
+ @newplugins = ( @newplugins, $unused_plugins[$ct] );
+
+ # sanitize the plugin
+ $dir = $unused_plugins[$ct];
+ `./ri_once.pl ../plugins/$dir`;
+ }
+ $ct++;
+ }
+ @plugins = @newplugins;
+ }
+ }
+ return @plugins;
+}
+
+sub command8s {
+ print "This command will sanitize all plugins for use with\n";
+ print "Squirrelmail 1.2. That is, it will rewrite some php-\n";
+ print "constructs that are *incompatible* with the 1.2 design\n";
+ print "into ones that are *compatible*\n";
+ print "Do you wish to issue this command [y/N]? ";
+ $ctu = <STDIN>;
+ if ( $ctu =~ /^y\n/i ) {
+ `./ri_once.pl ../plugins`;
+ }
+}
+
+################# FOLDERS ###################
+
+# default_folder_prefix
+sub command21 {
+ print "Some IMAP servers (UW, for example) store mail and folders in\n";
+ print "your user space in a separate subdirectory. This is where you\n";
+ print "specify what that directory is.\n";
+ print "\n";
+ print "EXAMPLE: mail/";
+ print "\n";
+ print "NOTE: If you use Cyrus, or some server that would not use this\n";
+ print " option, you must set this to 'none'.\n";
+ print "\n";
+ print "[$WHT$default_folder_prefix$NRM]: $WHT";
+ $new_default_folder_prefix = <STDIN>;
+
+ if ( $new_default_folder_prefix eq "\n" ) {
+ $new_default_folder_prefix = $default_folder_prefix;
+ } else {
+ $new_default_folder_prefix =~ s/[\r|\n]//g;
+ }
+ if ( ( $new_default_folder_prefix =~ /^\s*$/ ) || ( $new_default_folder_prefix =~ /none/i ) ) {
+ $new_default_folder_prefix = "";
+ } else {
+ $new_default_folder_prefix =~ s/\/*$//g;
+ $new_default_folder_prefix =~ s/$/\//g;
+ }
+ return $new_default_folder_prefix;
+}
+
+# Show Folder Prefix
+sub command22 {
+ print "It is possible to set up the default folder prefix as a user\n";
+ print "specific option, where each user can specify what their mail\n";
+ print "folder is. If you set this to false, they will never see the\n";
+ print "option, but if it is true, this option will appear in the\n";
+ print "'options' section.\n";
+ print "\n";
+ print "NOTE: You set the default folder prefix in option '1' of this\n";
+ print " section. That will be the default if the user doesn't\n";
+ print " specify anything different.\n";
+ print "\n";
+
+ if ( lc($show_prefix_option) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "\n";
+ print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $show_prefix_option = "true";
+ } else {
+ $show_prefix_option = "false";
+ }
+ return $show_prefix_option;
+}
+
+# Trash Folder
+sub command23a {
+ print "You can now specify where the default trash folder is located.\n";
+ print "On servers where you do not want this, you can set it to anything\n";
+ print "and set option 6 to false.\n";
+ print "\n";
+ print "This is relative to where the rest of your email is kept. You do\n";
+ print "not need to worry about their mail directory. If this folder\n";
+ print "would be ~/mail/trash on the filesystem, you only need to specify\n";
+ print "that this is 'trash', and be sure to put 'mail/' in option 1.\n";
+ print "\n";
+
+ print "[$WHT$trash_folder$NRM]: $WHT";
+ $new_trash_folder = <STDIN>;
+ if ( $new_trash_folder eq "\n" ) {
+ $new_trash_folder = $trash_folder;
+ } else {
+ $new_trash_folder =~ s/[\r|\n]//g;
+ }
+ return $new_trash_folder;
+}
+
+# Sent Folder
+sub command23b {
+ print "This is where messages that are sent will be stored. SquirrelMail\n";
+ print "by default puts a copy of all outgoing messages in this folder.\n";
+ print "\n";
+ print "This is relative to where the rest of your email is kept. You do\n";
+ print "not need to worry about their mail directory. If this folder\n";
+ print "would be ~/mail/sent on the filesystem, you only need to specify\n";
+ print "that this is 'sent', and be sure to put 'mail/' in option 1.\n";
+ print "\n";
+
+ print "[$WHT$sent_folder$NRM]: $WHT";
+ $new_sent_folder = <STDIN>;
+ if ( $new_sent_folder eq "\n" ) {
+ $new_sent_folder = $sent_folder;
+ } else {
+ $new_sent_folder =~ s/[\r|\n]//g;
+ }
+ return $new_sent_folder;
+}
+
+# Draft Folder
+sub command23c {
+ print "You can now specify where the default draft folder is located.\n";
+ print "On servers where you do not want this, you can set it to anything\n";
+ print "and set option 9 to false.\n";
+ print "\n";
+ print "This is relative to where the rest of your email is kept. You do\n";
+ print "not need to worry about their mail directory. If this folder\n";
+ print "would be ~/mail/drafts on the filesystem, you only need to specify\n";
+ print "that this is 'drafts', and be sure to put 'mail/' in option 1.\n";
+ print "\n";
+
+ print "[$WHT$draft_folder$NRM]: $WHT";
+ $new_draft_folder = <STDIN>;
+ if ( $new_draft_folder eq "\n" ) {
+ $new_draft_folder = $draft_folder;
+ } else {
+ $new_draft_folder =~ s/[\r|\n]//g;
+ }
+ return $new_draft_folder;
+}
+
+# default move to trash
+sub command24a {
+ print "By default, should messages get moved to the trash folder? You\n";
+ print "can specify the default trash folder in option 3. If this is set\n";
+ print "to false, messages will get deleted immediately without moving\n";
+ print "to the trash folder.\n";
+ print "\n";
+ print "Trash folder is currently: $trash_folder\n";
+ print "\n";
+
+ if ( lc($default_move_to_trash) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "By default, move to trash (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $default_move_to_trash = "true";
+ } else {
+ $default_move_to_trash = "false";
+ }
+ return $default_move_to_trash;
+}
+
+# default move to sent
+sub command24b {
+ print "By default, should messages get moved to the sent folder? You\n";
+ print "can specify the default sent folder in option 4. If this is set\n";
+ print "to false, messages will get sent and no copy will be made.\n";
+ print "\n";
+ print "Sent folder is currently: $sent_folder\n";
+ print "\n";
+
+ if ( lc($default_move_to_sent) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "By default, move to sent (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $default_move_to_sent = "true";
+ } else {
+ $default_move_to_sent = "false";
+ }
+ return $default_move_to_sent;
+}
+
+# default save as draft
+sub command24c {
+ print "By default, should the save to draft option be shown? You can\n";
+ print "specify the default drafts folder in option 5. If this is set\n";
+ print "to false, users will not be shown the save to draft option.\n";
+ print "\n";
+ print "Drafts folder is currently: $draft_folder\n";
+ print "\n";
+
+ if ( lc($default_move_to_draft) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "By default, save as draft (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $default_save_as_draft = "true";
+ } else {
+ $default_save_as_draft = "false";
+ }
+ return $default_save_as_draft;
+}
+
+# List special folders first
+sub command27 {
+ print "SquirrelMail has what we call 'special folders' that are not\n";
+ print "manipulated and viewed like normal folders. Some examples of\n";
+ print "these folders would be INBOX, Trash, Sent, etc. This option\n";
+ print "Simply asks if you want these folders listed first in the folder\n";
+ print "listing.\n";
+ print "\n";
+
+ if ( lc($list_special_folders_first) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "\n";
+ print "List first (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $list_special_folders_first = "true";
+ } else {
+ $list_special_folders_first = "false";
+ }
+ return $list_special_folders_first;
+}
+
+# Show special folders color
+sub command28 {
+ print "SquirrelMail has what we call 'special folders' that are not\n";
+ print "manipulated and viewed like normal folders. Some examples of\n";
+ print "these folders would be INBOX, Trash, Sent, etc. This option\n";
+ print "wants to know if we should display special folders in a\n";
+ print "color than the other folders.\n";
+ print "\n";
+
+ if ( lc($use_special_folder_color) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "\n";
+ print "Show color (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $use_special_folder_color = "true";
+ } else {
+ $use_special_folder_color = "false";
+ }
+ return $use_special_folder_color;
+}
+
+# Auto expunge
+sub command29 {
+ print "The way that IMAP handles deleting messages is as follows. You\n";
+ print "mark the message as deleted, and then to 'really' delete it, you\n";
+ print "expunge it. This option asks if you want to just have messages\n";
+ print "marked as deleted, or if you want SquirrelMail to expunge the \n";
+ print "messages too.\n";
+ print "\n";
+
+ if ( lc($auto_expunge) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Auto expunge (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $auto_expunge = "true";
+ } else {
+ $auto_expunge = "false";
+ }
+ return $auto_expunge;
+}
+
+# Default sub of inbox
+sub command210 {
+ print "Some IMAP servers (Cyrus) have all folders as subfolders of INBOX.\n";
+ print "This can cause some confusion in folder creation for users when\n";
+ print "they try to create folders and don't put it as a subfolder of INBOX\n";
+ print "and get permission errors. This option asks if you want folders\n";
+ print "to be subfolders of INBOX by default.\n";
+ print "\n";
+
+ if ( lc($default_sub_of_inbox) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Default sub of INBOX (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $default_sub_of_inbox = "true";
+ } else {
+ $default_sub_of_inbox = "false";
+ }
+ return $default_sub_of_inbox;
+}
+
+# Show contain subfolder option
+sub command211 {
+ print "Some IMAP servers (UW) make it so that there are two types of\n";
+ print "folders. Those that contain messages, and those that contain\n";
+ print "subfolders. If this is the case for your server, set this to\n";
+ print "true, and it will ask the user whether the folder they are\n";
+ print "creating contains subfolders or messages.\n";
+ print "\n";
+
+ if ( lc($show_contain_subfolders_option) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $show_contain_subfolders_option = "true";
+ } else {
+ $show_contain_subfolders_option = "false";
+ }
+ return $show_contain_subfolders_option;
+}
+
+# Default Unseen Notify
+sub command212 {
+ print "This option specifies where the users will receive notification\n";
+ print "about unseen messages by default. This is of course an option that\n";
+ print "can be changed on a user level.\n";
+ print " 1 = No notification\n";
+ print " 2 = Only on the INBOX\n";
+ print " 3 = On all folders\n";
+ print "\n";
+
+ print "Which one should be default (1,2,3)? [$WHT$default_unseen_notify$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( $new_show =~ /^[1|2|3]\n/i ) {
+ $default_unseen_notify = $new_show;
+ }
+ $default_unseen_notify =~ s/[\r|\n]//g;
+ return $default_unseen_notify;
+}
+
+# Default Unseen Type
+sub command213 {
+ print "Here you can define the default way that unseen messages will be displayed\n";
+ print "to the user in the folder listing on the left side.\n";
+ print " 1 = Only unseen messages (4)\n";
+ print " 2 = Unseen and Total messages (4/27)\n";
+ print "\n";
+
+ print "Which one should be default (1,2)? [$WHT$default_unseen_type$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( $new_show =~ /^[1|2]\n/i ) {
+ $default_unseen_type = $new_show;
+ }
+ $default_unseen_type =~ s/[\r|\n]//g;
+ return $default_unseen_type;
+}
+
+# Auto create special folders
+sub command214 {
+ print "Would you like the Sent, Trash, and Drafts folders to be created\n";
+ print "automatically print for you when a user logs in? If the user\n";
+ print "accidentally deletes their special folders, this option will\n";
+ print "automatically create it again for them.\n";
+ print "\n";
+
+ if ( lc($auto_create_special) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Auto create special folders? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $auto_create_special = "true";
+ } else {
+ $auto_create_special = "false";
+ }
+ return $auto_create_special;
+}
+
+# Auto create special folders
+sub command215 {
+ print "Would you like to automatically completely delete any deleted\n";
+ print "folders? If not then they will be moved to the Trash folder\n";
+ print "and can be deleted from there\n";
+ print "\n";
+
+ if ( lc($delete_folder) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Auto delete folders? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_delete = <STDIN>;
+ if ( ( $new_delete =~ /^y\n/i ) || ( ( $new_delete =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $delete_folder = "true";
+ } else {
+ $delete_folder = "false";
+ }
+ return $delete_folder;
+}
+
+############# GENERAL OPTIONS #####################
+
+# Default Charset
+sub command31 {
+ print "This option controls what character set is used when sending\n";
+ print "mail and when sending HTML to the browser. Do not set this\n";
+ print "to US-ASCII, use ISO-8859-1 instead. For cyrillic, it is best\n";
+ print "to use KOI8-R, since this implementation is faster than most\n";
+ print "of the alternatives\n";
+ print "\n";
+
+ print "[$WHT$default_charset$NRM]: $WHT";
+ $new_default_charset = <STDIN>;
+ if ( $new_default_charset eq "\n" ) {
+ $new_default_charset = $default_charset;
+ } else {
+ $new_default_charset =~ s/[\r|\n]//g;
+ }
+ return $new_default_charset;
+}
+
+# Data directory
+sub command33a {
+ print "It is a possible security hole to have a writable directory\n";
+ print "under the web server's root directory (ex: /home/httpd/html).\n";
+ print "For this reason, it is possible to put the data directory\n";
+ print "anywhere you would like. The path name can be absolute or\n";
+ print "relative (to the config directory). It doesn't matter. Here\n";
+ print "are two examples:\n";
+ print " Absolute: /usr/local/squirrelmail/data/\n";
+ print " Relative: ../data/\n";
+ print "\n";
+
+ print "[$WHT$data_dir$NRM]: $WHT";
+ $new_data_dir = <STDIN>;
+ if ( $new_data_dir eq "\n" ) {
+ $new_data_dir = $data_dir;
+ } else {
+ $new_data_dir =~ s/[\r|\n]//g;
+ }
+ if ( $new_data_dir =~ /^\s*$/ ) {
+ $new_data_dir = "";
+ } else {
+ $new_data_dir =~ s/\/*$//g;
+ $new_data_dir =~ s/$/\//g;
+ }
+ return $new_data_dir;
+}
+
+# Attachment directory
+sub command33b {
+ print "Path to directory used for storing attachments while a mail is\n";
+ print "being sent. There are a few security considerations regarding this\n";
+ print "directory:\n";
+ print " 1. It should have the permission 733 (rwx-wx-wx) to make it\n";
+ print " impossible for a random person with access to the webserver\n";
+ print " to list files in this directory. Confidential data might\n";
+ print " be laying around in there.\n";
+ print " 2. Since the webserver is not able to list the files in the\n";
+ print " content is also impossible for the webserver to delete files\n";
+ print " lying around there for too long.\n";
+ print " 3. It should probably be another directory than the data\n";
+ print " directory specified in option 3.\n";
+ print "\n";
+
+ print "[$WHT$attachment_dir$NRM]: $WHT";
+ $new_attachment_dir = <STDIN>;
+ if ( $new_attachment_dir eq "\n" ) {
+ $new_attachment_dir = $attachment_dir;
+ } else {
+ $new_attachment_dir =~ s/[\r|\n]//g;
+ }
+ if ( $new_attachment_dir =~ /^\s*$/ ) {
+ $new_attachment_dir = "";
+ } else {
+ $new_attachment_dir =~ s/\/*$//g;
+ $new_attachment_dir =~ s/$/\//g;
+ }
+ return $new_attachment_dir;
+}
+
+sub command33c {
+ print "The directory hash level setting allows you to configure the level\n";
+ print "of hashing that Squirremail employs in your data and attachment\n";
+ print "directories. This value must be an integer ranging from 0 to 4.\n";
+ print "When this value is set to 0, Squirrelmail will simply store all\n";
+ print "files as normal in the data and attachment directories. However,\n";
+ print "when set to a value from 1 to 4, a simple hashing scheme will be\n";
+ print "used to organize the files in this directory. In short, the crc32\n";
+ print "value for a username will be computed. Then, up to the first 4\n";
+ print "digits of the hash, as set by this configuration value, will be\n";
+ print "used to directory hash the files for that user in the data and\n";
+ print "attachment directory. This allows for better performance on\n";
+ print "servers with larger numbers of users.\n";
+ print "\n";
+
+ print "[$WHT$dir_hash_level$NRM]: $WHT";
+ $new_dir_hash_level = <STDIN>;
+ if ( $new_dir_hash_level eq "\n" ) {
+ $new_dir_hash_level = $dir_hash_level;
+ } else {
+ $new_dir_hash_level =~ s/[\r|\n]//g;
+ }
+ if ( ( int($new_dir_hash_level) < 0 )
+ || ( int($new_dir_hash_level) > 4 )
+ || !( int($new_dir_hash_level) eq $new_dir_hash_level ) ) {
+ print "Invalid Directory Hash Level.\n";
+ print "Value must be an integer ranging from 0 to 4\n";
+ print "Hit enter to continue.\n";
+ $enter_key = <STDIN>;
+
+ $new_dir_hash_level = $dir_hash_level;
+ }
+
+ return $new_dir_hash_level;
+}
+
+sub command35 {
+ print "This is the default size (in pixels) of the left folder list.\n";
+ print "Default is 200, but you can set it to whatever you wish. This\n";
+ print "is a user preference, so this will only show up as their default.\n";
+ print "\n";
+ print "[$WHT$default_left_size$NRM]: $WHT";
+ $new_default_left_size = <STDIN>;
+ if ( $new_default_left_size eq "\n" ) {
+ $new_default_left_size = $default_left_size;
+ } else {
+ $new_default_left_size =~ s/[\r|\n]//g;
+ }
+ return $new_default_left_size;
+}
+
+sub command36 {
+ print "Some IMAP servers only have lowercase letters in the usernames\n";
+ print "but they still allow people with uppercase to log in. This\n";
+ print "causes a problem with the user's preference files. This option\n";
+ print "transparently changes all usernames to lowercase.";
+ print "\n";
+
+ if ( lc($force_username_lowercase) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Convert usernames to lowercase (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ return "true";
+ }
+ return "false";
+}
+
+sub command37 {
+ print "";
+ print "\n";
+
+ if ( lc($default_use_priority) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+
+ print "Allow users to specify priority of outgoing mail (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ return "true";
+ }
+ return "false";
+}
+
+sub command38 {
+ print "";
+ print "\n";
+
+ if ( lc($default_hide_attribution) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+
+ print "Hide SM attributions (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ return "true";
+ }
+ return "false";
+}
+
+sub command39 {
+ print "";
+ print "\n";
+
+ if ( lc($default_use_mdn) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+
+ print "Enable support for read/delivery receipt support (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ return "true";
+ }
+ return "false";
+}
+
+sub command310 {
+ print "This allows you to prevent the editing of the users name and";
+ print "email address. This is mainly useful when used with the";
+ print "retrieveuserdata plugin\n";
+ print "\n";
+
+ if ( lc($edit_identity) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Allow editing? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_edit = <STDIN>;
+ if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $edit_identity = "true";
+ } else {
+ $edit_identity = "false";
+ }
+ return $edit_identity;
+}
+
+sub command311 {
+ print "This option allows you to choose if the user can edit their full name";
+ print "even when you don't want them to change their username\n";
+ print "\n";
+
+ if ( lc($edit_name) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Allow editing of the users full name? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_edit = <STDIN>;
+ if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $edit_name = "true";
+ } else {
+ $edit_name = "false";
+ }
+ return $edit_name;
+}
+
+sub command41 {
+ print "\nNow we will define the themes that you wish to use. If you have added\n";
+ print "a theme of your own, just follow the instructions (?) about how to add\n";
+ print "them. You can also change the default theme.\n";
+ print "[theme] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ while ( $input ne "d" ) {
+ if ( $input =~ /^\s*l\s*/i ) {
+ $count = 0;
+ while ( $count <= $#theme_name ) {
+ if ( $count == $theme_default ) {
+ print " *";
+ } else {
+ print " ";
+ }
+ $name = $theme_name[$count];
+ $num_spaces = 25 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
+
+ print " $count. $name";
+ print "($theme_path[$count])\n";
+
+ $count++;
+ }
+ } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
+ $old_def = $theme_default;
+ $theme_default = $input;
+ $theme_default =~ s/^\s*m\s*//;
+ if ( ( $theme_default > $#theme_name ) || ( $theme_default < 0 ) ) {
+ print "Cannot set default theme to $theme_default. That theme does not exist.\n";
+ $theme_default = $old_def;
+ }
+ } elsif ( $input =~ /^\s*\+/ ) {
+ print "What is the name of this theme: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $theme_name[ $#theme_name + 1 ] = $name;
+ print "Be sure to put ../themes/ before the filename.\n";
+ print "What file is this stored in (ex: ../themes/default_theme.php): ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $theme_path[ $#theme_path + 1 ] = $name;
+ } elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
+ if ( $input =~ /[0-9]+\s*$/ ) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#theme_name;
+ }
+ if ( $rem_num == $theme_default ) {
+ print "You cannot remove the default theme!\n";
+ } else {
+ $count = 0;
+ @new_theme_name = ();
+ @new_theme_path = ();
+ while ( $count <= $#theme_name ) {
+ if ( $count != $rem_num ) {
+ @new_theme_name = ( @new_theme_name, $theme_name[$count] );
+ @new_theme_path = ( @new_theme_path, $theme_path[$count] );
+ }
+ $count++;
+ }
+ @theme_name = @new_theme_name;
+ @theme_path = @new_theme_path;
+ if ( $theme_default > $rem_num ) {
+ $theme_default--;
+ }
+ }
+ } elsif ( $input =~ /^\s*t\s*/i ) {
+ print "\nStarting detection...\n\n";
+
+ opendir( DIR, "../themes" );
+ @files = grep { /\.php$/i } readdir(DIR);
+ $cnt = 0;
+ while ( $cnt <= $#files ) {
+ $filename = "../themes/" . $files[$cnt];
+ if ( $filename ne "../themes/index.php" ) {
+ $found = 0;
+ for ( $x = 0 ; $x <= $#theme_path ; $x++ ) {
+ if ( $theme_path[$x] eq $filename ) {
+ $found = 1;
+ }
+ }
+ if ( $found != 1 ) {
+ print "** Found theme: $filename\n";
+ print " What is its name? ";
+ $nm = <STDIN>;
+ $nm =~ s/[\n|\r]//g;
+ $theme_name[ $#theme_name + 1 ] = $nm;
+ $theme_path[ $#theme_path + 1 ] = $filename;
+ }
+ }
+ $cnt++;
+ }
+ print "\n";
+ for ( $cnt = 0 ; $cnt <= $#theme_path ; $cnt++ ) {
+ $filename = $theme_path[$cnt];
+ if ( !( -e $filename ) ) {
+ print " Removing $filename (file not found)\n";
+ $offset = 0;
+ @new_theme_name = ();
+ @new_theme_path = ();
+ for ( $x = 0 ; $x < $#theme_path ; $x++ ) {
+ if ( $theme_path[$x] eq $filename ) {
+ $offset = 1;
+ }
+ if ( $offset == 1 ) {
+ $new_theme_name[$x] = $theme_name[ $x + 1 ];
+ $new_theme_path[$x] = $theme_path[ $x + 1 ];
+ } else {
+ $new_theme_name[$x] = $theme_name[$x];
+ $new_theme_path[$x] = $theme_path[$x];
+ }
+ }
+ @theme_name = @new_theme_name;
+ @theme_path = @new_theme_path;
+ }
+ }
+ print "\nDetection complete!\n\n";
+
+ closedir DIR;
+ } elsif ( $input =~ /^\s*\?\s*/ ) {
+ print ".-------------------------.\n";
+ print "| t (detect themes) |\n";
+ print "| + (add theme) |\n";
+ print "| - N (remove theme) |\n";
+ print "| m N (mark default) |\n";
+ print "| l (list themes) |\n";
+ print "| d (done) |\n";
+ print "`-------------------------'\n";
+ }
+ print "[theme] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ }
+}
+
+# Theme - CSS file
+sub command42 {
+ print "You may specify a cascading style-sheet (CSS) file to be included\n";
+ print "on each html page generated by SquirrelMail. The CSS file is useful\n";
+ print "for specifying a site-wide font. If you're not familiar with CSS\n";
+ print "files, leave this blank.\n";
+ print "\n";
+ print "To clear out an existing value, just type a space for the input.\n";
+ print "\n";
+ print "[$WHT$theme_css$NRM]: $WHT";
+ $new_theme_css = <STDIN>;
+
+ if ( $new_theme_css eq "\n" ) {
+ $new_theme_css = $theme_css;
+ } else {
+ $new_theme_css =~ s/[\r|\n]//g;
+ }
+ $new_theme_css =~ s/^\s*//;
+ return $new_theme_css;
+}
+
+sub command61 {
+ print "You can now define different LDAP servers.\n";
+ print "[ldap] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ while ( $input ne "d" ) {
+ if ( $input =~ /^\s*l\s*/i ) {
+ $count = 0;
+ while ( $count <= $#ldap_host ) {
+ print "$count. $ldap_host[$count]\n";
+ print " base: $ldap_base[$count]\n";
+ if ( $ldap_charset[$count] ) {
+ print " charset: $ldap_charset[$count]\n";
+ }
+ if ( $ldap_port[$count] ) {
+ print " port: $ldap_port[$count]\n";
+ }
+ if ( $ldap_name[$count] ) {
+ print " name: $ldap_name[$count]\n";
+ }
+ if ( $ldap_maxrows[$count] ) {
+ print " maxrows: $ldap_maxrows[$count]\n";
+ }
+ print "\n";
+ $count++;
+ }
+ } elsif ( $input =~ /^\s*\+/ ) {
+ $sub = $#ldap_host + 1;
+
+ print "First, we need to have the hostname or the IP address where\n";
+ print "this LDAP server resides. Example: ldap.bigfoot.com\n";
+ print "hostname: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_host[$sub] = $name;
+
+ print "\n";
+
+ print "Next, we need the server root (base dn). For this, an empty\n";
+ print "string is allowed.\n";
+ print "Example: ou=member_directory,o=netcenter.com\n";
+ print "base: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_base[$sub] = $name;
+
+ print "\n";
+
+ print "This is the TCP/IP port number for the LDAP server. Default\n";
+ print "port is 389. This is optional. Press ENTER for default.\n";
+ print "port: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_port[$sub] = $name;
+
+ print "\n";
+
+ print "This is the charset for the server. Default is utf-8. This\n";
+ print "is also optional. Press ENTER for default.\n";
+ print "charset: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_charset[$sub] = $name;
+
+ print "\n";
+
+ print "This is the name for the server, used to tag the results of\n";
+ print "the search. Default it \"LDAP: hostname\". Press ENTER for default\n";
+ print "name: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_name[$sub] = $name;
+
+ print "\n";
+
+ print "You can specify the maximum number of rows in the search result.\n";
+ print "Default is unlimited. Press ENTER for default.\n";
+ print "maxrows: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_maxrows[$sub] = $name;
+
+ print "\n";
+
+ } elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
+ if ( $input =~ /[0-9]+\s*$/ ) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#ldap_host;
+ }
+ $count = 0;
+ @new_ldap_host = ();
+ @new_ldap_base = ();
+ @new_ldap_port = ();
+ @new_ldap_name = ();
+ @new_ldap_charset = ();
+ @new_ldap_maxrows = ();
+
+ while ( $count <= $#ldap_host ) {
+ if ( $count != $rem_num ) {
+ @new_ldap_host = ( @new_ldap_host, $ldap_host[$count] );
+ @new_ldap_base = ( @new_ldap_base, $ldap_base[$count] );
+ @new_ldap_port = ( @new_ldap_port, $ldap_port[$count] );
+ @new_ldap_name = ( @new_ldap_name, $ldap_name[$count] );
+ @new_ldap_charset = ( @new_ldap_charset, $ldap_charset[$count] );
+ @new_ldap_maxrows = ( @new_ldap_maxrows, $ldap_maxrows[$count] );
+ }
+ $count++;
+ }
+ @ldap_host = @new_ldap_host;
+ @ldap_base = @new_ldap_base;
+ @ldap_port = @new_ldap_port;
+ @ldap_name = @new_ldap_name;
+ @ldap_charset = @new_ldap_charset;
+ @ldap_maxrows = @new_ldap_maxrows;
+ } elsif ( $input =~ /^\s*\?\s*/ ) {
+ print ".-------------------------.\n";
+ print "| + (add host) |\n";
+ print "| - N (remove host) |\n";
+ print "| l (list hosts) |\n";
+ print "| d (done) |\n";
+ print "`-------------------------'\n";
+ }
+ print "[ldap] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ }
+}
+
+sub command62 {
+ print "Some of our developers have come up with very good javascript interface\n";
+ print "for searching through address books, however, our original goals said\n";
+ print "that we would be 100% HTML. In order to make it possible to use their\n";
+ print "interface, and yet stick with our goals, we have also written a plain\n";
+ print "HTML version of the search. Here, you can choose which version to use.\n";
+ print "\n";
+ print "This is just the default value. It is also a user option that each\n";
+ print "user can configure individually\n";
+ print "\n";
+
+ if ( lc($default_use_javascript_addr_book) eq "true" ) {
+ $default_value = "y";
+ } else {
+ $default_use_javascript_addr_book = "false";
+ $default_value = "n";
+ }
+ print "Use javascript version by default (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $default_use_javascript_addr_book = "true";
+ } else {
+ $default_use_javascript_addr_book = "false";
+ }
+ return $default_use_javascript_addr_book;
+}
+
+sub command91 {
+ print "If you want to store your users address book details in a database then\n";
+ print "you need to set this DSN to a valid value. The format for this is:\n";
+ print "mysql://user:pass\@hostname/dbname\n";
+ print "Where mysql can be one of the databases PHP supports, the most common\n";
+ print "of these are mysql, msql and pgsql\n";
+ print "If the DSN is left empty (hit space and then return) the database\n";
+ print "related code for address books will not be used\n";
+ print "\n";
+
+ if ( $addrbook_dsn eq "" ) {
+ $default_value = "Disabled";
+ } else {
+ $default_value = $addrbook_dsn;
+ }
+ print "[$WHT$addrbook_dsn$NRM]: $WHT";
+ $new_dsn = <STDIN>;
+ if ( $new_dsn eq "\n" ) {
+ $new_dsn = "";
+ } else {
+ $new_dsn =~ s/[\r|\n]//g;
+ $new_dsn =~ s/^\s+$//g;
+ }
+ return $new_dsn;
+}
+
+sub command92 {
+ print "This is the name of the table you want to store the address book\n";
+ print "data in, it defaults to 'address'\n";
+ print "\n";
+ print "[$WHT$addrbook_table$NRM]: $WHT";
+ $new_table = <STDIN>;
+ if ( $new_table eq "\n" ) {
+ $new_table = $addrbook_table;
+ } else {
+ $new_table =~ s/[\r|\n]//g;
+ }
+ return $new_table;
+}
+
+sub command93 {
+ print "If you want to store your users preferences in a database then\n";
+ print "you need to set this DSN to a valid value. The format for this is:\n";
+ print "mysql://user:pass\@hostname/dbname\n";
+ print "Where mysql can be one of the databases PHP supports, the most common\n";
+ print "of these are mysql, msql and pgsql\n";
+ print "If the DSN is left empty (hit space and then return) the database\n";
+ print "related code for address books will not be used\n";
+ print "\n";
+
+ if ( $prefs_dsn eq "" ) {
+ $default_value = "Disabled";
+ } else {
+ $default_value = $prefs_dsn;
+ }
+ print "[$WHT$prefs_dsn$NRM]: $WHT";
+ $new_dsn = <STDIN>;
+ if ( $new_dsn eq "\n" ) {
+ $new_dsn = "";
+ } else {
+ $new_dsn =~ s/[\r|\n]//g;
+ $new_dsn =~ s/^\s+$//g;
+ }
+ return $new_dsn;
+}
+
+sub command94 {
+ print "This is the name of the table you want to store the preferences\n";
+ print "data in, it defaults to 'userprefs'\n";
+ print "\n";
+ print "[$WHT$prefs_table$NRM]: $WHT";
+ $new_table = <STDIN>;
+ if ( $new_table eq "\n" ) {
+ $new_table = $prefs_table;
+ } else {
+ $new_table =~ s/[\r|\n]//g;
+ }
+ return $new_table;
+}
+
+sub command95 {
+ print "This is the name of the field in which you want to store the\n";
+ print "username of the person the prefs are for. It default to 'user'\n";
+ print "which clashes with a reserved keyword in PostgreSQL so this\n";
+ print "will need to be changed for that database at least\n";
+ print "\n";
+ print "[$WHT$prefs_user_field$NRM]: $WHT";
+ $new_field = <STDIN>;
+ if ( $new_field eq "\n" ) {
+ $new_field = $prefs_user_field;
+ } else {
+ $new_field =~ s/[\r|\n]//g;
+ }
+ return $new_field;
+}
+
+sub command96 {
+ print "This is the name of the field in which you want to store the\n";
+ print "preferences keyword. It defaults to 'prefkey'\n";
+ print "\n";
+ print "[$WHT$prefs_key_field$NRM]: $WHT";
+ $new_field = <STDIN>;
+ if ( $new_field eq "\n" ) {
+ $new_field = $prefs_key_field;
+ } else {
+ $new_field =~ s/[\r|\n]//g;
+ }
+ return $new_field;
+}
+
+sub command97 {
+ print "This is the name of the field in which you want to store the\n";
+ print "preferences value. It defaults to 'prefval'\n";
+ print "\n";
+ print "[$WHT$prefs_val_field$NRM]: $WHT";
+ $new_field = <STDIN>;
+ if ( $new_field eq "\n" ) {
+ $new_field = $prefs_val_field;
+ } else {
+ $new_field =~ s/[\r|\n]//g;
+ }
+ return $new_field;
+}
+
+sub save_data {
+ $tab = " ";
+ if ( open( CF, ">config.php" ) ) {
+ print CF "<?php\n";
+ print CF "\n";
+
+ print CF "/**\n";
+ print CF " * SquirrelMail Configuration File\n";
+ print CF " * Created using the configure script, conf.pl\n";
+ print CF " */\n";
+ print CF "\n";
+
+ if ($print_config_version) {
+ print CF "\$config_version = '$print_config_version';\n";
+ }
+ print CF "\$config_use_color = $config_use_color;\n";
+ print CF "\n";
+
+ print CF "\$org_name = \"$org_name\";\n";
+ print CF "\$org_logo = '$org_logo';\n";
+ $org_logo_width |= 0;
+ $org_logo_height |= 0;
+ print CF "\$org_logo_width = $org_logo_width;\n";
+ print CF "\$org_logo_height = $org_logo_height;\n";
+ print CF "\$org_logo = '$org_logo';\n";
+ print CF "\$org_title = \"$org_title\";\n";
+ print CF "\$signout_page = '$signout_page';\n";
+ print CF "\$frame_top = '$frame_top';\n";
+ print CF "\n";
+
+ print CF "\$motd = '$motd';\n";
+ print CF "\n";
+
+ print CF "\$squirrelmail_default_language = '$squirrelmail_default_language';\n";
+ print CF "\n";
+
+ print CF "\$domain = '$domain';\n";
+ print CF "\$imapServerAddress = '$imapServerAddress';\n";
+ print CF "\$imapPort = $imapPort;\n";
+ print CF "\$useSendmail = $useSendmail;\n";
+ print CF "\$smtpServerAddress = '$smtpServerAddress';\n";
+ print CF "\$smtpPort = $smtpPort;\n";
+ print CF "\$sendmail_path = '$sendmail_path';\n";
+ print CF "\$use_authenticated_smtp = $use_authenticated_smtp;\n";
+ print CF "\$imap_server_type = '$imap_server_type';\n";
+ print CF "\$invert_time = $invert_time;\n";
+ print CF "\$optional_delimiter = '$optional_delimiter';\n";
+ print CF "\n";
+
+ print CF "\$default_folder_prefix = '$default_folder_prefix';\n";
+ print CF "\$trash_folder = '$trash_folder';\n";
+ print CF "\$sent_folder = '$sent_folder';\n";
+ print CF "\$draft_folder = '$draft_folder';\n";
+ print CF "\$default_move_to_trash = $default_move_to_trash;\n";
+ print CF "\$default_move_to_sent = $default_move_to_sent;\n";
+ print CF "\$default_save_as_draft = $default_save_as_draft;\n";
+ print CF "\$show_prefix_option = $show_prefix_option;\n";
+ print CF "\$list_special_folders_first = $list_special_folders_first;\n";
+ print CF "\$use_special_folder_color = $use_special_folder_color;\n";
+ print CF "\$auto_expunge = $auto_expunge;\n";
+ print CF "\$default_sub_of_inbox = $default_sub_of_inbox;\n";
+ print CF "\$show_contain_subfolders_option = $show_contain_subfolders_option;\n";
+ print CF "\$default_unseen_notify = $default_unseen_notify;\n";
+ print CF "\$default_unseen_type = $default_unseen_type;\n";
+ print CF "\$auto_create_special = $auto_create_special;\n";
+ print CF "\$delete_folder = $delete_folder;\n";
+ print CF "\n";
+
+ print CF "\$default_charset = '$default_charset';\n";
+ print CF "\$data_dir = '$data_dir';\n";
+ print CF "\$attachment_dir = \"$attachment_dir\";\n";
+ print CF "\$dir_hash_level = $dir_hash_level;\n";
+ print CF "\$default_left_size = $default_left_size;\n";
+ print CF "\$force_username_lowercase = $force_username_lowercase;\n";
+ print CF "\$default_use_priority = $default_use_priority;\n";
+ print CF "\$hide_sm_attributions = $hide_sm_attributions;\n";
+ print CF "\$default_use_mdn = $default_use_mdn;\n";
+ print CF "\$edit_identity = $edit_identity;\n";
+ print CF "\$edit_name = $edit_name;\n";
+ print CF "\n";
+
+ for ( $ct = 0 ; $ct <= $#plugins ; $ct++ ) {
+ print CF "\$plugins[$ct] = '$plugins[$ct]';\n";
+ }
+ print CF "\n";
+
+ print CF "\$theme_css = '$theme_css';\n";
+ for ( $count = 0 ; $count <= $#theme_name ; $count++ ) {
+ print CF "\$theme[$count]['PATH'] = '$theme_path[$count]';\n";
+ print CF "\$theme[$count]['NAME'] = '$theme_name[$count]';\n";
+ }
+ print CF "\n";
+
+ if ( $default_use_javascript_addr_book ne "true" ) {
+ $default_use_javascript_addr_book = "false";
+ }
+ print CF "\$default_use_javascript_addr_book = $default_use_javascript_addr_book;\n";
+ for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
+ print CF "\$ldap_server[$count] = array(\n";
+ print CF " 'host' => '$ldap_host[$count]',\n";
+ print CF " 'base' => '$ldap_base[$count]'";
+ if ( $ldap_name[$count] ) {
+ print CF ",\n";
+ print CF " 'name' => '$ldap_name[$count]'";
+ }
+ if ( $ldap_port[$count] ) {
+ print CF ",\n";
+ print CF " 'port' => '$ldap_port[$count]'";
+ }
+ if ( $ldap_charset[$count] ) {
+ print CF ",\n";
+ print CF " 'charset' => '$ldap_charset[$count]'";
+ }
+ if ( $ldap_maxrows[$count] ) {
+ print CF ",\n";
+ print CF " 'maxrows' => '$ldap_maxrows[$count]'";
+ }
+ print CF "\n";
+ print CF ");\n";
+ print CF "\n";
+ }
+
+ print CF "\$addrbook_dsn = '$addrbook_dsn';\n";
+ print CF "\$addrbook_table = '$addrbook_table';\n\n";
+ print CF "\$prefs_dsn = '$prefs_dsn';\n";
+ print CF "\$prefs_table = '$prefs_table';\n";
+ print CF "\$prefs_user_field = '$prefs_user_field';\n";
+ print CF "\$prefs_key_field = '$prefs_key_field';\n";
+ print CF "\$prefs_val_field = '$prefs_val_field';\n";
+ print CF "\n";
+
+ print CF "/**\n";
+ print CF " * Make sure there are no characters after the PHP closing\n";
+ print CF " * tag below (including newline characters and whitespace).\n";
+ print CF " * Otherwise, that character will cause the headers to be\n";
+ print CF " * sent and regular output to begin, which will majorly screw\n";
+ print CF " * things up when we try to send more headers later.\n";
+ print CF " */\n";
+ print CF "?>";
+
+ close CF;
+
+ print "Data saved in config.php\n";
+ } else {
+ print "Error saving config.php: $!\n";
+ }
+}
+
+sub set_defaults {
+ system "clear";
+ print $WHT. "SquirrelMail Configuration : " . $NRM;
+ if ( $config == 1 ) { print "Read: config.php"; }
+ elsif ( $config == 2 ) { print "Read: config_default.php"; }
+ print "\n";
+ print "---------------------------------------------------------\n";
+
+ print "While we have been building SquirrelMail, we have discovered some\n";
+ print "preferences that work better with some servers that don't work so\n";
+ print "well with others. If you select your IMAP server, this option will\n";
+ print "set some pre-defined settings for that server.\n";
+ print "\n";
+ print "Please note that you will still need to go through and make sure\n";
+ print "everything is correct. This does not change everything. There are\n";
+ print "only a few settings that this will change.\n";
+ print "\n";
+
+ $continue = 0;
+ while ( $continue != 1 ) {
+ print "Please select your IMAP server:\n";
+ print " cyrus = Cyrus IMAP server\n";
+ print " uw = University of Washington's IMAP server\n";
+ print " exchange = Microsoft Exchange IMAP server\n";
+ print " courier = Courier IMAP server\n";
+ print " quit = Do not change anything\n";
+ print "Command >> ";
+ $server = <STDIN>;
+ $server =~ s/[\r|\n]//g;
+
+ print "\n";
+ if ( $server eq "cyrus" ) {
+ $imap_server_type = "cyrus";
+ $default_folder_prefix = "";
+ $trash_folder = "INBOX.Trash";
+ $sent_folder = "INBOX.Sent";
+ $draft_folder = "INBOX.Drafts";
+ $show_prefix_option = false;
+ $default_sub_of_inbox = true;
+ $show_contain_subfolders_option = false;
+ $optional_delimiter = ".";
+ $disp_default_folder_prefix = "<none>";
+
+ $continue = 1;
+ } elsif ( $server eq "uw" ) {
+ $imap_server_type = "uw";
+ $default_folder_prefix = "mail/";
+ $trash_folder = "Trash";
+ $sent_folder = "Sent";
+ $draft_folder = "Drafts";
+ $show_prefix_option = true;
+ $default_sub_of_inbox = false;
+ $show_contain_subfolders_option = true;
+ $optional_delimiter = "/";
+ $disp_default_folder_prefix = $default_folder_prefix;
+
+ $continue = 1;
+ } elsif ( $server eq "exchange" ) {
+ $imap_server_type = "exchange";
+ $default_folder_prefix = "";
+ $default_sub_of_inbox = true;
+ $trash_folder = "INBOX/Deleted Items";
+ $sent_folder = "INBOX/Sent Items";
+ $drafts_folder = "INBOX/Drafts";
+ $show_prefix_option = false;
+ $show_contain_subfolders_option = false;
+ $optional_delimiter = "detect";
+ $disp_default_folder_prefix = "<none>";
+
+ $continue = 1;
+ } elsif ( $server eq "courier" ) {
+ $imap_server_type = "courier";
+ $default_folder_prefix = "INBOX.";
+ $trash_folder = "Trash";
+ $sent_folder = "Sent";
+ $draft_folder = "Drafts";
+ $show_prefix_option = false;
+ $default_sub_of_inbox = false;
+ $show_contain_subfolders_option = false;
+ $optional_delimiter = ".";
+ $disp_default_folder_prefix = $default_folder_prefix;
+
+ $continue = 1;
+ } elsif ( $server eq "quit" ) {
+ $continue = 1;
+ } else {
+ $disp_default_folder_prefix = $default_folder_prefix;
+ print "Unrecognized server: $server\n";
+ print "\n";
+ }
+
+ print " imap_server_type = $imap_server_type\n";
+ print " default_folder_prefix = $disp_default_folder_prefix\n";
+ print " trash_folder = $trash_folder\n";
+ print " sent_folder = $sent_folder\n";
+ print " draft_folder = $draft_folder\n";
+ print " show_prefix_option = $show_prefix_option\n";
+ print " default_sub_of_inbox = $default_sub_of_inbox\n";
+ print "show_contain_subfolders_option = $show_contain_subfolders_option\n";
+ print " optional_delimiter = $optional_delimiter\n";
+ }
+ print "\nPress any key to continue...";
+ $tmp = <STDIN>;