entities[count($this->entities)] = $msg;
}
}
/* --------------------------------------------------------------------------------- */
/* MIME DECODING */
/* --------------------------------------------------------------------------------- */
// This function gets the structure of a message and stores it in the "message" class.
// It will return this object for use with all relevant header information and
// fully parsed into the standard "message" object format.
function mime_structure ($imap_stream, $header) {
global $debug_mime;
sqimap_messages_flag ($imap_stream, $header->id, $header->id, "Seen");
$id = $header->id;
fputs ($imap_stream, "a001 FETCH $id BODYSTRUCTURE\r\n");
$read = fgets ($imap_stream, 10000);
$read = strtolower($read);
if ($debug_mime) echo "$read
";
// isolate the body structure and remove beginning and end parenthesis
$read = trim(substr ($read, strpos($read, "bodystructure") + 13));
$read = trim(substr ($read, 0, -1));
$end = mime_match_parenthesis(0, $read);
while ($end == strlen($read)-1) {
$read = trim(substr ($read, 0, -1));
$read = trim(substr ($read, 1));
$end = mime_match_parenthesis(0, $read);
}
if ($debug_mime) echo "$read
";
$msg = mime_parse_structure ($read);
$msg->header = $header;
return $msg;
}
// this starts the parsing of a particular structure. It is called recursively,
// so it can be passed different structures. It returns an object of type
// $message.
// First, it checks to see if it is a multipart message. If it is, then it
// handles that as it sees is necessary. If it is just a regular entity,
// then it parses it and adds the necessary header information (by calling out
// to mime_get_elements()
function mime_parse_structure ($structure, $ent_id) {
global $debug_mime;
if ($debug_mime) echo "START: mime_parse_structure() ";
$msg = new message();
if (substr($structure, 0, 1) == "(") {
$ent_id = mime_new_element_level($ent_id);
$start = $end = -1;
if ($debug_mime) echo " $structure ";
do {
if ($debug_mime) echo "Found entity... ";
$start = $end+1;
$end = mime_match_parenthesis ($start, $structure);
$element = substr($structure, $start+1, ($end - $start)-1);
$ent_id = mime_increment_id ($ent_id);
$newmsg = mime_parse_structure ($element, $ent_id);
$msg->addEntity ($newmsg);
} while (substr($structure, $end+1, 1) == "(");
} else {
// parse the elements
if ($debug_mime) echo " $structure ";
$msg = mime_get_element (&$structure, $msg, $ent_id);
if ($debug_mime) echo " ";
}
return $msg;
if ($debug_mime) echo " END: mime_parse_structure() ";
}
// Increments the element ID. An element id can look like any of
// the following: 1, 1.2, 4.3.2.4.1, etc. This function increments
// the last number of the element id, changing 1.2 to 1.3.
function mime_increment_id ($id) {
global $debug_mime;
if (strpos($id, ".")) {
$first = substr($id, 0, strrpos($id, "."));
$last = substr($id, strrpos($id, ".")+1);
$last++;
$new = $first . "." .$last;
} else {
$new = $id + 1;
}
if ($debug_mime) echo "INCREMENT: $new ";
return $new;
}
// See comment for mime_increment_id().
// This adds another level on to the entity_id changing 1.3 to 1.3.0
// NOTE: 1.3.0 is not a valid element ID. It MUST be incremented
// before it can be used. I left it this way so as not to have
// to make a special case if it is the first entity_id. It
// always increments it, and that works fine.
function mime_new_element_level ($id) {
if (!$id) $id = 0;
else $id = $id . ".0";
return $id;
}
function mime_get_element (&$structure, $msg, $ent_id) {
global $debug_mime;
$elem_num = 1;
$msg->header = new msg_header();
$msg->header->entity_id = $ent_id;
while (strlen($structure) > 0) {
$structure = trim($structure);
$char = substr($structure, 0, 1);
if (substr($structure, 0, 3) == "nil") {
$text = "";
$structure = substr($structure, 3);
} else if ($char == "\"") {
// loop through until we find the matching quote, and return that as a string
$pos = 1;
$char = substr($structure, $pos, 1);
while ($char != "\"" && $pos < strlen($structure)) {
$text .= $char;
$pos++;
$char = substr($structure, $pos, 1);
}
$structure = substr($structure, strlen($text) + 2);
} else if ($char == "(") {
// comment me
$end = mime_match_parenthesis (0, $structure);
$sub = substr($structure, 1, $end-1);
$properties = mime_get_props($properties, $sub);
$structure = substr($structure, strlen($sub) + 2);
} else {
// loop through until we find a space or an end parenthesis
$pos = 0;
$char = substr($structure, $pos, 1);
while ($char != " " && $char != ")" && $pos < strlen($structure)) {
$text .= $char;
$pos++;
$char = substr($structure, $pos, 1);
}
$structure = substr($structure, strlen($text));
}
if ($debug_mime) echo "$elem_num : $text ";
// This is where all the text parts get put into the header
switch ($elem_num) {
case 1:
$msg->header->type0 = $text;
if ($debug_mime) echo "type0 = $text ";
break;
case 2:
$msg->header->type1 = $text;
if ($debug_mime) echo "type1 = $text ";
break;
case 5:
$msg->header->description = $text;
if ($debug_mime) echo "description = $text ";
break;
case 6:
$msg->header->encoding = $text;
if ($debug_mime) echo "encoding = $text ";
break;
case 7:
$msg->header->size = $text;
if ($debug_mime) echo "size = $text ";
break;
default:
if ($msg->header->type0 == "text" && $elem_num == 8) {
// This is a plain text message, so lets get the number of lines
// that it contains.
$msg->header->num_lines = $text;
if ($debug_mime) echo "num_lines = $text ";
} else if ($msg->header->type0 == "message" && $msg->header->type1 == "rfc822" && $elem_num == 8) {
// This is an encapsulated message, so lets start all over again and
// parse this message adding it on to the existing one.
$structure = trim($structure);
if (substr($structure, 0, 1) == "(") {
$e = mime_match_parenthesis (0, $structure);
$structure = substr($structure, 0, $e);
$structure = substr($structure, 1);
$m = mime_parse_structure($structure, $msg->header->entity_id);
// the following conditional is there to correct a bug that wasn't
// incrementing the entity IDs correctly because of the special case
// that message/rfc822 is. This fixes it fine.
if (substr($structure, 1, 1) != "(")
$m->header->entity_id = mime_increment_id(mime_new_element_level($ent_id));
// Now we'll go through and reformat the results.
if ($m->entities) {
for ($i=0; $i < count($m->entities); $i++) {
$msg->addEntity($m->entities[$i]);
}
} else {
$msg->addEntity($m);
}
$structure = "";
}
}
break;
}
$elem_num++;
$text = "";
}
// loop through the additional properties and put those in the various headers
if ($msg->header->type0 != "message") {
for ($i=0; $i < count($properties); $i++) {
$msg->header->{$properties[$i]["name"]} = $properties[$i]["value"];
if ($debug_mime) echo "".$properties[$i]["name"]." = " . $properties[$i]["value"] . " ";
}
}
return $msg;
}
// I did most of the MIME stuff yesterday (June 20, 2000), but I couldn't
// figure out how to do this part, so I decided to go to bed. I woke up
// in the morning and had a flash of insight. I went to the white-board
// and scribbled it out, then spent a bit programming it, and this is the
// result. Nothing complicated, but I think my brain was fried yesterday.
// Funny how that happens some times.
//
// This gets properties in a nested parenthesisized list. For example,
// this would get passed something like: ("attachment" ("filename" "luke.tar.gz"))
// This returns an array called $props with all paired up properties.
// It ignores the "attachment" for now, maybe that should change later
// down the road. In this case, what is returned is:
// $props[0]["name"] = "filename";
// $props[0]["value"] = "luke.tar.gz";
function mime_get_props ($props, $structure) {
global $debug_mime;
while (strlen($structure) > 0) {
$structure = trim($structure);
$char = substr($structure, 0, 1);
if ($char == "\"") {
$pos = 1;
$char = substr($structure, $pos, 1);
while ($char != "\"" && $pos < strlen($structure)) {
$tmp .= $char;
$pos++;
$char = substr($structure, $pos, 1);
}
$structure = trim(substr($structure, strlen($tmp) + 2));
$char = substr($structure, 0, 1);
if ($char == "\"") {
$pos = 1;
$char = substr($structure, $pos, 1);
while ($char != "\"" && $pos < strlen($structure)) {
$value .= $char;
$pos++;
$char = substr($structure, $pos, 1);
}
$structure = trim(substr($structure, strlen($tmp) + 2));
$k = count($props);
$props[$k]["name"] = $tmp;
$props[$k]["value"] = $value;
} else if ($char == "(") {
$end = mime_match_parenthesis (0, $structure);
$sub = substr($structure, 1, $end-1);
$props = mime_get_props($props, $sub);
$structure = substr($structure, strlen($sub) + 2);
}
return $props;
} else if ($char == "(") {
$end = mime_match_parenthesis (0, $structure);
$sub = substr($structure, 1, $end-1);
$props = mime_get_props($props, $sub);
$structure = substr($structure, strlen($sub) + 2);
return $props;
} else {
return $props;
}
}
}
// Matches parenthesis. It will return the position of the matching
// parenthesis in $structure. For instance, if $structure was:
// ("text" "plain" ("val1name", "1") nil ... )
// x x
// then this would return 42 to match up those two.
function mime_match_parenthesis ($pos, $structure) {
$char = substr($structure, $pos, 1);
// ignore all extra characters
while ($pos < strlen($structure)) {
$pos++;
$char = substr($structure, $pos, 1);
if ($char == ")") {
return $pos;
} else if ($char == "(") {
$pos = mime_match_parenthesis ($pos, $structure);
}
}
}
function mime_fetch_body ($imap_stream, $id, $ent_id) {
// do a bit of error correction. If we couldn't find the entity id, just guess
// that it is the first one. That is usually the case anyway.
if (!$ent_id) $ent_id = 1;
fputs ($imap_stream, "a001 FETCH $id BODY[$ent_id]\r\n");
$topline = fgets ($imap_stream, 1024);
$size = substr ($topline, strpos($topline, "{")+1);
$size = substr ($size, 0, strpos($size, "}"));
$read = fread ($imap_stream, $size);
return $read;
}
/* -[ END MIME DECODING ]----------------------------------------------------------- */
/** This is the first function called. It decides if this is a multipart
message or if it should be handled as a single entity
**/
function decodeMime ($body, $header) {
global $username, $key, $imapServerAddress, $imapPort;
$imap_stream = sqimap_login($username, $key, $imapServerAddress, $imapPort, 0);
sqimap_mailbox_select($imap_stream, $header->mailbox);
return mime_structure ($imap_stream, $header);
}
// This is here for debugging purposese. It will print out a list
// of all the entity IDs that are in the $message object.
function listEntities ($message) {
if ($message) {
if ($message->header->entity_id)
echo "" . $message->header->entity_id . " : " . $message->header->type0 . "/" . $message->header->type1 . " ";
for ($i = 0; $message->entities[$i]; $i++) {
$msg = listEntities($message->entities[$i], $ent_id);
if ($msg)
return $msg;
}
}
}
// returns a $message object for a particular entity id
function getEntity ($message, $ent_id) {
if ($message) {
if ($message->header->entity_id == $ent_id && strlen($ent_id) == strlen($message->header->entity_id)) {
return $message;
} else {
for ($i = 0; $message->entities[$i]; $i++) {
$msg = getEntity ($message->entities[$i], $ent_id);
if ($msg)
return $msg;
}
}
}
}
// figures out what entity to display and returns the $message object
// for that entity.
function findDisplayEntity ($message) {
if ($message) {
if ($message->header->type0 == "text") {
if ($message->header->type1 == "plain" ||
$message->header->type1 == "html") {
return $message->header->entity_id;
}
} else {
for ($i=0; $message->entities[$i]; $i++) {
return findDisplayEntity($message->entities[$i]);
}
}
}
}
/** This returns a parsed string called $body. That string can then
be displayed as the actual message in the HTML. It contains
everything needed, including HTML Tags, Attachments at the
bottom, etc.
**/
function formatBody($message, $color, $wrap_at) {
// this if statement checks for the entity to show as the
// primary message. To add more of them, just put them in the
// order that is their priority.
global $username, $key, $imapServerAddress, $imapPort;
$id = $message->header->id;
$urlmailbox = urlencode($message->header->mailbox);
$imap_stream = sqimap_login($username, $key, $imapServerAddress, $imapPort, 0);
sqimap_mailbox_select($imap_stream, $message->header->mailbox);
$ent_num = findDisplayEntity ($message);
$body = mime_fetch_body ($imap_stream, $id, $ent_num);
// If there are other types that shouldn't be formatted, add
// them here
if ($message->header->type1 != "html") {
$body = translateText($body, $wrap_at, $charset);
}
$body .= "