src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatenates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7 #
   8 # Copyright (c) The Exim Maintainers 1995 - 2018
   9
  10 SHELL      = $(MAKE_SHELL)
  11 SCRIPTS    = ../scripts
  12 O          = ../OS
  13 EDITME     = ../Local/Makefile
  14 EXIMON_EDITME = ../Local/eximon.conf
  15
  16 # The compiler used for linking is normally the same as the compiler used for
  17 # compiling. However, by giving it a different name, we can override it from
  18 # the command line, and this is helpful for certain types of testing.
  19
  20 LNCC = $(CC)
  21
  22 # The compile commands can be very long. To make the output look better,
  23 # they are not normally echoed in full. To get full echoing, the caller
  24 # must set FULLECHO='' on the command line and call make with -e. We default
  25 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  26
  27 FULLECHO = @
  28 FE       = $(FULLECHO)
  29
  30 # The default target double-checks the existence of $(EDITME) and then arranges
  31 # to touch it if it exists and any of the optional configuration files, which
  32 # depend on the os or the architecture, have been altered. The same sub-target
  33 # does the same thing for the eximon configuration file if it exists. Then
  34 # there is a check that the Makefile (the one built from this file) is
  35 # up-to-date. Then the os-specific source files and the C configuration file
  36 # are set up, and finally it goes to the main Exim target.
  37
  38 all:       utils exim
  39 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c
  40
  41 checklocalmake:
  42         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  43           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  44           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  45         then \
  46           touch $(EDITME); \
  47         fi
  48         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  49           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  50           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  51         then \
  52           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  53         fi
  54
  55 $(EDITME):
  56         @echo " "
  57         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  58         @echo "*** appropriate changes for your site."
  59         @echo " "
  60         @false
  61
  62 $(EXIMON_EDITME):
  63         @echo " "
  64         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  65         @echo "*** appropriate changes for your site."
  66         @echo " "
  67         @test ! -d ../Local && mkdir ../Local
  68         @false
  69
  70 # Check that the local Makefile is up-to-date
  71
  72 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  73           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  74         @echo " "
  75         @echo "*** Makefile needs rebuilding"
  76         @echo "*** Please run \"make makefile\" at top level"
  77         @echo " "
  78         @false
  79
  80 # Build (link) the os.h file
  81
  82 os.h:   $(SCRIPTS)/Configure-os.h \
  83         $(O)/os.h-Darwin        \
  84         $(O)/os.h-FreeBSD       \
  85         $(O)/os.h-GNU           \
  86         $(O)/os.h-Linux         \
  87         $(O)/os.h-OpenBSD       \
  88         $(O)/os.h-SunOS5
  89         $(SHELL) $(SCRIPTS)/Configure-os.h
  90
  91 # Build the os.c file
  92
  93 os.c:   ../src/os.c \
  94         $(SCRIPTS)/Configure-os.c \
  95         $(O)/os.c-FreeBSD       \
  96         $(O)/os.c-GNU           \
  97         $(O)/os.c-Linux         \
  98         $(O)/os.c-SunOS5
  99         $(SHELL) $(SCRIPTS)/Configure-os.c
 100
 101 # Build the config.h file.
 102
 103 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 104         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 105
 106 # Build the builtin-macros data struct
 107
 108 MACRO_HSRC = macro_predef.h os.h globals.h config.h macros.h \
 109         routers/accept.h routers/dnslookup.h routers/ipliteral.h \
 110         routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
 111         routers/redirect.h
 112
 113 OBJ_MACRO = macro_predef.o \
 114         macro-globals.o macro-readconf.o macro-route.o macro-transport.o macro-drtables.o \
 115         macro-tls.o \
 116         macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
 117         macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
 118         macro-manualroute.o macro-queryprogram.o macro-redirect.o \
 119         macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \
 120         macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \
 121         macro-dkim.o macro-malware.o macro-signing.o
 122
 123 $(OBJ_MACRO):   $(MACRO_HSRC)
 124
 125 macro_predef.o :        macro_predef.c
 126         @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
 127         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
 128 macro-globals.o :       globals.c
 129         @echo "$(CC) -DMACRO_PREDEF globals.c"
 130         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
 131 macro-readconf.o :      readconf.c
 132         @echo "$(CC) -DMACRO_PREDEF readconf.c"
 133         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
 134 macro-route.o :         route.c
 135         @echo "$(CC) -DMACRO_PREDEF route.c"
 136         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
 137 macro-transport.o:      transport.c
 138         @echo "$(CC) -DMACRO_PREDEF transport.c"
 139         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
 140 macro-drtables.o :      drtables.c
 141         @echo "$(CC) -DMACRO_PREDEF drtables.c"
 142         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
 143 macro-tls.o:    tls.c tls-gnu.c tls-openssl.c
 144         @echo "$(CC) -DMACRO_PREDEF tls.c"
 145         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c
 146 macro-appendfile.o :    transports/appendfile.c
 147         @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
 148         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
 149 macro-autoreply.o :     transports/autoreply.c
 150         @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
 151         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
 152 macro-lmtp.o:           transports/lmtp.c
 153         @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
 154         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
 155 macro-pipe.o :          transports/pipe.c
 156         @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
 157         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
 158 macro-queuefile.o :     transports/queuefile.c
 159         @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
 160         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
 161 macro-smtp.o :          transports/smtp.c
 162         @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
 163         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
 164 macro-accept.o :        routers/accept.c
 165         @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
 166         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
 167 macro-dnslookup.o :     routers/dnslookup.c
 168         @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
 169         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
 170 macro-ipliteral.o :     routers/ipliteral.c
 171         @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
 172         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
 173 macro-iplookup.o :      routers/iplookup.c
 174         @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
 175         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
 176 macro-manualroute.o :   routers/manualroute.c
 177         @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
 178         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
 179 macro-queryprogram.o :  routers/queryprogram.c
 180         @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
 181         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
 182 macro-redirect.o :      routers/redirect.c
 183         @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
 184         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
 185 macro-auth-spa.o :      auths/auth-spa.c
 186         @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
 187         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
 188 macro-cram_md5.o :      auths/cram_md5.c
 189         @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
 190         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
 191 macro-cyrus_sasl.o :    auths/cyrus_sasl.c
 192         @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
 193         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
 194 macro-dovecot.o:        auths/dovecot.c
 195         @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
 196         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
 197 macro-external.o:       auths/external.c
 198         @echo "$(CC) -DMACRO_PREDEF auths/external.c"
 199         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c
 200 macro-gsasl_exim.o :    auths/gsasl_exim.c
 201         @echo "$(CC) -DMACRO_PREDEF auths/gsasl_exim.c"
 202         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl_exim.c
 203 macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
 204         @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
 205         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
 206 macro-plaintext.o :     auths/plaintext.c
 207         @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
 208         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
 209 macro-spa.o :           auths/spa.c
 210         @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
 211         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
 212 macro-authtls.o:        auths/tls.c
 213         @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
 214         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
 215 macro-dkim.o:           dkim.c
 216         @echo "$(CC) -DMACRO_PREDEF dkim.c"
 217         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
 218 macro-malware.o:        malware.c
 219         @echo "$(CC) -DMACRO_PREDEF malware.c"
 220         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
 221 macro-signing.o:        pdkim/signing.c
 222         @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c"
 223         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c
 224
 225 macro_predef: $(OBJ_MACRO)
 226         @echo "$(LNCC) -o $@"
 227         $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
 228
 229 macro.c: macro_predef
 230         ./macro_predef > macro.c
 231
 232 # This target is recognized specially by GNU make. It records those targets
 233 # that do not correspond to files that are being built and which should
 234 # therefore always be run, even if the files exist. This shouldn't in fact be a
 235 # problem, but it does no harm. Other make programs will just ignore this.
 236
 237 .PHONY: all config utils \
 238         buildauths buildlookups buildpdkim buildrouters \
 239         buildtransports checklocalmake clean
 240
 241
 242 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 243         exigrep eximstats exipick exiqgrep exiqsumm \
 244         transport-filter.pl convert4r3 convert4r4 \
 245         exim_checkaccess \
 246         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 247
 248
 249 # Targets for special-purpose configuration header builders
 250 buildconfig: buildconfig.c
 251         @echo "$(CC) buildconfig.c"
 252         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 253
 254
 255 # Target for the exicyclog utility script
 256 exicyclog: config ../src/exicyclog.src
 257         @rm -f exicyclog
 258         @. ./version.sh && sed \
 259           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 260           -e "/^# /p" \
 261           -e "/^# /d" \
 262           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 263           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 264           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 265           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 266           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 267           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 268           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 269           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 270           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 271           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 272           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 273           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 274           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 275           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 276           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 277           ../src/exicyclog.src > exicyclog-t
 278         @mv exicyclog-t exicyclog
 279         @chmod a+x exicyclog
 280         @echo ">>> exicyclog script built"
 281
 282 # Target for the exinext utility script
 283 exinext: config ../src/exinext.src
 284         @rm -f exinext
 285         @. ./version.sh && sed \
 286           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 287           -e "/^# /p" \
 288           -e "/^# /d" \
 289           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 290           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 291           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 292           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 293           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 294           ../src/exinext.src > exinext-t
 295         @mv exinext-t exinext
 296         @chmod a+x exinext
 297         @echo ">>> exinext script built"
 298
 299 # Target for the exiwhat utility script
 300 exiwhat: config ../src/exiwhat.src
 301         @rm -f exiwhat
 302         @. ./version.sh && sed \
 303           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 304           -e "/^# /p" \
 305           -e "/^# /d" \
 306           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 307           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 308           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 309           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 310           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 311           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 312           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 313           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 314           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 315           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 316           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 317           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 318           ../src/exiwhat.src > exiwhat-t
 319         @mv exiwhat-t exiwhat
 320         @chmod a+x exiwhat
 321         @echo ">>> exiwhat script built"
 322
 323 # Target for the exim_checkaccess utility script
 324 exim_checkaccess: config ../src/exim_checkaccess.src
 325         @rm -f exim_checkaccess
 326         @. ./version.sh && sed \
 327           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 328           -e "/^# /p" \
 329           -e "/^# /d" \
 330           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 331           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 332           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 333           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 334           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 335           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 336           ../src/exim_checkaccess.src > exim_checkaccess-t
 337         @mv exim_checkaccess-t exim_checkaccess
 338         @chmod a+x exim_checkaccess
 339         @echo ">>> exim_checkaccess script built"; echo ""
 340
 341 # Target for the Exim monitor start-up script
 342 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 343           ../Local/eximon.conf
 344         @rm -f eximon
 345         $(SHELL) $(SCRIPTS)/Configure-eximon
 346         @. ./version.sh && sed \
 347           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 348           -e "/^# /p" \
 349           -e "/^# /d" \
 350           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 351           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 352           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 353           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 354           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 355           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 356           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 357           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 358           ../src/eximon.src >> eximon
 359         @echo ">>> eximon script built"; echo ""
 360
 361 # Targets for utilities; these are all Perl scripts that have to get the
 362 # location of Perl put in them. A few need other things as well.
 363
 364 exigrep: config ../src/exigrep.src
 365         @rm -f exigrep
 366         @. ./version.sh && sed \
 367           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 368           -e "/^# /p" \
 369           -e "/^# /d" \
 370           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 371           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 372           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 373           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 374           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 375           ../src/exigrep.src > exigrep-t
 376         @mv exigrep-t exigrep
 377         @chmod a+x exigrep
 378         @echo ">>> exigrep script built"
 379
 380 eximstats: config ../src/eximstats.src
 381         @rm -f eximstats
 382         @. ./version.sh && sed \
 383           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 384           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 385           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 386           ../src/eximstats.src > eximstats-t
 387         @mv eximstats-t eximstats
 388         @chmod a+x eximstats
 389         @echo ">>> eximstats script built"
 390
 391 exiqgrep: config ../src/exiqgrep.src
 392         @rm -f exiqgrep
 393         @. ./version.sh && sed \
 394           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 395           -e "/^# /p" \
 396           -e "/^# /d" \
 397           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 398           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 399           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 400           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 401           ../src/exiqgrep.src > exiqgrep-t
 402         @mv exiqgrep-t exiqgrep
 403         @chmod a+x exiqgrep
 404         @echo ">>> exiqgrep script built"
 405
 406 exiqsumm: config ../src/exiqsumm.src
 407         @rm -f exiqsumm
 408         @. ./version.sh && sed \
 409           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 410           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 411           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 412           ../src/exiqsumm.src > exiqsumm-t
 413         @mv exiqsumm-t exiqsumm
 414         @chmod a+x exiqsumm
 415         @echo ">>> exiqsumm script built"
 416
 417 exipick: config ../src/exipick.src
 418         @rm -f exipick
 419         @. ./version.sh && sed \
 420           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 421           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 422           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 423           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 424           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 425           ../src/exipick.src > exipick-t
 426         @mv exipick-t exipick
 427         @chmod a+x exipick
 428         @echo ">>> exipick script built"
 429
 430 transport-filter.pl: config ../src/transport-filter.src
 431         @rm -f transport-filter.pl
 432         @. ./version.sh && sed \
 433           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 434           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 435           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 436           ../src/transport-filter.src > transport-filter.pl-t
 437         @mv transport-filter.pl-t transport-filter.pl
 438         @chmod a+x transport-filter.pl
 439         @echo ">>> transport-filter.pl script built"
 440
 441 convert4r3: config ../src/convert4r3.src
 442         @rm -f convert4r3
 443         @. ./version.sh && sed \
 444           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 445           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 446           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 447           ../src/convert4r3.src > convert4r3-t
 448         @mv convert4r3-t convert4r3
 449         @chmod a+x convert4r3
 450         @echo ">>> convert4r3 script built"
 451
 452 convert4r4: config ../src/convert4r4.src
 453         @rm -f convert4r4
 454         @. ./version.sh && sed \
 455           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 456           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 457           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 458           ../src/convert4r4.src > convert4r4-t
 459         @mv convert4r4-t convert4r4
 460         @chmod a+x convert4r4
 461         @echo ">>> convert4r4 script built"
 462
 463
 464 # These are objects of optional features. They are always compiled, but
 465 # if the corresponding #defines are not set, they wind up empty and
 466 # are thrown away by the linker.
 467
 468 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 469 OBJ_EXPERIMENTAL =      arc.o \
 470                         bmi_spam.o \
 471                         dane.o \
 472                         dcc.o \
 473                         dmarc.o \
 474                         imap_utf7.o \
 475                         spf.o \
 476                         srs.o \
 477                         utf8.o
 478
 479 # Targets for final binaries; the main one has a build number which is
 480 # updated each time. We don't bother with that for the auxiliaries.
 481
 482 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 483
 484 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 485         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 486         filtertest.o globals.o dkim.o dkim_transport.o hash.o \
 487         header.o host.o ip.o log.o lss.o match.o md5.o moan.o \
 488         os.o parse.o queue.o \
 489         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 490         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 491         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 492         environment.o macro.o \
 493         $(OBJ_LOOKUPS) \
 494         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 495         $(OBJ_EXPERIMENTAL)
 496
 497 exim:   buildlookups buildauths pdkim/pdkim.a \
 498         buildrouters buildtransports \
 499         $(OBJ_EXIM) version.o
 500         @echo "$(LNCC) -o exim"
 501         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 502           routers/routers.a transports/transports.a lookups/lookups.a \
 503           auths/auths.a pdkim/pdkim.a \
 504           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 505           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 506           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 507         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 508           echo $(STRIP_COMMAND) exim; \
 509           $(STRIP_COMMAND) exim; \
 510         fi
 511         $(EXIM_CHMOD)
 512         @echo " "
 513         @echo ">>> exim binary built"
 514         @echo " "
 515
 516 # The utility for dumping the contents of an exim database
 517
 518 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 519
 520 exim_dumpdb: $(OBJ_DUMPDB)
 521         @echo "$(LNCC) -o exim_dumpdb"
 522         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 523           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 524         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 525           echo $(STRIP_COMMAND) exim_dumpdb; \
 526           $(STRIP_COMMAND) exim_dumpdb; \
 527         fi
 528         @echo ">>> exim_dumpdb utility built"
 529         @echo " "
 530
 531 # The utility for interrogating/fixing the contents of an exim database
 532
 533 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o util-md5.o
 534
 535 exim_fixdb:  $(OBJ_FIXDB)
 536         @echo "$(LNCC) -o exim_fixdb"
 537         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 538           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 539         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 540           echo $(STRIP_COMMAND) exim_fixdb; \
 541           $(STRIP_COMMAND) exim_fixdb; \
 542         fi
 543         @echo ">>> exim_fixdb utility built"
 544         @echo " "
 545
 546 # The utility for tidying the contents of an exim database
 547
 548 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 549
 550 exim_tidydb: $(OBJ_TIDYDB)
 551         @echo "$(LNCC) -o exim_tidydb"
 552         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 553           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 554         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 555           echo $(STRIP_COMMAND) exim_tidydb; \
 556           $(STRIP_COMMAND) exim_tidydb; \
 557         fi
 558         @echo ">>> exim_tidydb utility built"
 559         @echo " "
 560
 561 # The utility for building dbm files
 562
 563 exim_dbmbuild: exim_dbmbuild.o
 564         @echo "$(LNCC) -o exim_dbmbuild"
 565         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 566           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 567         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 568           echo $(STRIP_COMMAND) exim_dbmbuild; \
 569           $(STRIP_COMMAND) exim_dbmbuild; \
 570         fi
 571         @echo ">>> exim_dbmbuild utility built"
 572         @echo " "
 573
 574 # The utility for locking a mailbox while messing around with it
 575
 576 exim_lock: exim_lock.c os.h
 577         @echo "$(CC) exim_lock.c"
 578         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 579         @echo "$(LNCC) -o exim_lock"
 580         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 581           $(LIBS) $(EXTRALIBS)
 582         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 583           echo $(STRIP_COMMAND) exim_lock; \
 584           $(STRIP_COMMAND) exim_lock; \
 585         fi
 586         @echo ">>> exim_lock utility built"
 587         @echo " "
 588
 589 # The X-based Exim monitor program's binary part. There's a macro for cutting
 590 # out the modified TextPop module, because some antique link editors cannot
 591 # handle the fact that it is redefining things that are found later in the
 592 # Xaw library.
 593
 594 # Object modules that are the unique Eximon modules
 595
 596 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 597         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 598         em_text.o em_xs.o
 599
 600 # The complete modules list also includes some specially compiled versions of
 601 # code from the main Exim source tree.
 602
 603 OBJ_MONBIN = util-spool_in.o \
 604              util-store.o \
 605              util-string.o \
 606              util-queue.o \
 607              util-tod.o \
 608              util-tree.o \
 609              $(MONBIN)
 610
 611 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) ../exim_monitor/em_version.c \
 612                 mytypes.h store.h macros.h
 613         @echo "$(CC) exim_monitor/em_version.c"
 614         $(FE)$(CC) -o em_version.o -c \
 615           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 616         @echo "$(LNCC) -o eximon.bin"
 617         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 618           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 619           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 620         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 621           echo $(STRIP_COMMAND) eximon.bin; \
 622           $(STRIP_COMMAND) eximon.bin; \
 623         fi
 624         @echo ">>> exim monitor binary built"
 625         @echo " "
 626
 627
 628 # Compile step for most of the exim modules. HDRS is a list of headers
 629 # which cause everything to be rebuilt. PHDRS is the same, for the use
 630 # of routers, transports, and authenticators. I can't find a way of doing this
 631 # in one. This list is overkill, but it doesn't really take much time to
 632 # rebuild Exim on a modern computer.
 633
 634 HDRS  = blob.h \
 635         config.h \
 636         dbfunctions.h \
 637         dbstuff.h \
 638         exim.h \
 639         functions.h \
 640         globals.h \
 641         hash.h \
 642         local_scan.h \
 643         macros.h \
 644         mytypes.h \
 645         sha_ver.h \
 646         structs.h \
 647         os.h \
 648         osfunctions.h
 649 PHDRS = ../config.h \
 650         ../dbfunctions.h \
 651         ../dbstuff.h \
 652         ../exim.h \
 653         ../functions.h \
 654         ../globals.h \
 655         ../local_scan.h \
 656         ../macros.h \
 657         ../mytypes.h \
 658         ../structs.h \
 659         ../os.h \
 660         ../osfunctions.h
 661
 662 .SUFFIXES: .o .c
 663 .c.o:;  @echo "$(CC) $*.c"
 664         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 665
 666 # Update Exim's version information and build the version object.
 667
 668 version.h version.sh::
 669         @../scripts/reversion
 670
 671 cnumber.h: version.h
 672
 673 version.o: $(HDRS) cnumber.h version.h version.c
 674
 675 # This is the dummy module for use by test compiles of individual modules. It
 676 # contains functions such as log_write() that may be called from bits of Exim
 677 # in the tested code.
 678
 679 dummies.o:       dummies.c
 680
 681 # Compile instructions for perl.o for when EXIM_PERL is set
 682
 683 perl.o:          $(HDRS) perl.c
 684         @echo "$(PERL_CC) perl.c"
 685         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 686
 687 # Compile instructions for the database utility modules
 688
 689 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 690         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 691         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 692                                       -DCOMPILE_UTILITY \
 693                                       -DEXIM_DUMPDB \
 694                                       -o exim_dumpdb.o exim_dbutil.c
 695
 696 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 697         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 698         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 699                                       -DCOMPILE_UTILITY \
 700                                       -DEXIM_FIXDB \
 701                                       -o exim_fixdb.o exim_dbutil.c
 702
 703 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 704         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 705         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 706                                       -DCOMPILE_UTILITY \
 707                                       -DEXIM_TIDYDB \
 708                                       -o exim_tidydb.o exim_dbutil.c
 709
 710 # Compile instructions for exim_dbmbuild
 711
 712 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 713         @echo "$(CC) exim_dbmbuild.c"
 714         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
 715                 -o exim_dbmbuild.o exim_dbmbuild.c
 716
 717 # Utilities use special versions of some modules - typically with debugging
 718 # calls cut out.
 719
 720 util-spool_in.o: $(HDRS) spool_in.c
 721         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 722         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 723
 724 util-store.o:    $(HDRS) store.c
 725         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 726         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 727
 728 util-string.o:   $(HDRS) string.c
 729         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 730         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 731
 732 util-md5.o:   $(HDRS) md5.c
 733         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 734         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-md5.o md5.c
 735
 736 util-queue.o:   $(HDRS) queue.c
 737         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 738         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
 739
 740 util-tod.o:   $(HDRS) tod.c
 741         @echo "$(CC) -DCOMPILE_UTILITY tod.c"
 742         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
 743
 744 util-tree.o:   $(HDRS) tree.c
 745         @echo "$(CC) -DCOMPILE_UTILITY tree.c"
 746         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tree.o tree.c
 747
 748 util-os.o:       $(HDRS) os.c
 749         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 750         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 751                                       -DCOMPILE_UTILITY \
 752                                       -DOS_LOAD_AVERAGE \
 753                                       -DFIND_RUNNING_INTERFACES \
 754                                       -o util-os.o os.c
 755
 756 # The local scan module depends only on its own special header, and is compiled
 757 # from a source whose location is set by configuration.
 758
 759 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 760         @echo "$(CC) local_scan.c"
 761         $(FE)$(CC) -DLOCAL_SCAN -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 762
 763 # Dependencies for the "ordinary" exim modules
 764
 765 acl.o:           $(HDRS) acl.c
 766 base64.o:        $(HDRS) mime.h base64.c
 767 child.o:         $(HDRS) child.c
 768 crypt16.o:       $(HDRS) crypt16.c
 769 daemon.o:        $(HDRS) daemon.c
 770 dbfn.o:          $(HDRS) dbfn.c
 771 debug.o:         $(HDRS) debug.c
 772 deliver.o:       $(HDRS) transports/smtp.h deliver.c
 773 directory.o:     $(HDRS) directory.c
 774 dns.o:           $(HDRS) dns.c
 775 enq.o:           $(HDRS) enq.c
 776 exim.o:          $(HDRS) exim.c
 777 expand.o:        $(HDRS) expand.c
 778 environment.o:   $(HDRS) environment.c
 779 filter.o:        $(HDRS) filter.c
 780 filtertest.o:    $(HDRS) filtertest.c
 781 globals.o:       $(HDRS) globals.c
 782 hash.o:          $(HDRS) hash.c
 783 header.o:        $(HDRS) header.c
 784 host.o:          $(HDRS) host.c
 785 ip.o:            $(HDRS) ip.c
 786 log.o:           $(HDRS) log.c
 787 lss.o:           $(HDRS) lss.c
 788 match.o:         $(HDRS) match.c
 789 md5.o:           $(HDRS) md5.c
 790 moan.o:          $(HDRS) moan.c
 791 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
 792 parse.o:         $(HDRS) parse.c
 793 queue.o:         $(HDRS) queue.c
 794 rda.o:           $(HDRS) rda.c
 795 readconf.o:      $(HDRS) readconf.c
 796 receive.o:       $(HDRS) receive.c
 797 retry.o:         $(HDRS) retry.c
 798 rewrite.o:       $(HDRS) rewrite.c
 799 rfc2047.o:       $(HDRS) rfc2047.c
 800 route.o:         $(HDRS) route.c
 801 search.o:        $(HDRS) search.c
 802 sieve.o:         $(HDRS) sieve.c
 803 smtp_in.o:       $(HDRS) smtp_in.c
 804 smtp_out.o:      $(HDRS) smtp_out.c
 805 spool_in.o:      $(HDRS) spool_in.c
 806 spool_out.o:     $(HDRS) spool_out.c
 807 std-crypto.o:    $(HDRS) std-crypto.c
 808 store.o:         $(HDRS) store.c
 809 string.o:        $(HDRS) string.c
 810 tls.o:           $(HDRS) tls.c \
 811                  tls-gnu.c tlscert-gnu.c \
 812                  tls-openssl.c tlscert-openssl.c \
 813                  tls-cipher-stdname.c
 814 tod.o:           $(HDRS) tod.c
 815 transport.o:     $(HDRS) transport.c
 816 tree.o:          $(HDRS) tree.c
 817 verify.o:        $(HDRS) transports/smtp.h verify.c
 818 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 819 dkim_transport.o: $(HDRS) dkim_transport.c
 820
 821 # Dependencies for WITH_CONTENT_SCAN modules
 822
 823 malware.o:       $(HDRS) malware.c
 824 mime.o:          $(HDRS) mime.h mime.c
 825 regex.o:         $(HDRS) regex.c
 826 spam.o:          $(HDRS) spam.c
 827 spool_mbox.o:    $(HDRS) spool_mbox.c
 828
 829
 830 # Dependencies for EXPERIMENTAL_* modules
 831
 832 arc.o:          $(HDRS) pdkim/pdkim.h arc.c
 833 bmi_spam.o:     $(HDRS) bmi_spam.c
 834 dane.o:         $(HDRS) dane.c dane-openssl.c
 835 dcc.o:          $(HDRS) dcc.h dcc.c
 836 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
 837 imap_utf7.o:    $(HDRS) imap_utf7.c
 838 spf.o:          $(HDRS) spf.h spf.c
 839 srs.o:          $(HDRS) srs.h srs.c
 840 utf8.o:         $(HDRS) utf8.c
 841
 842 # The module containing tables of available lookups, routers, auths, and
 843 # transports must be rebuilt if any of them are. However, because the makefiles
 844 # for the drivers are always run, we don't actually put the dependencies here,
 845 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 846 # drtables.o even though the .a files haven't in fact been updated. Instead
 847 # it is arranged that the lower-level makefiles remove drtables.o when they
 848 # rebuild the .a files.
 849
 850 drtables.o:      $(HDRS) drtables.c
 851
 852 # We depend upon object files built as part of building the lookups library
 853 # When using parallel make, we don't have the dependency to force building
 854 # in the sub-directory unless we force that dependency:
 855
 856 $(OBJ_LOOKUPS):  buildlookups
 857
 858 # The exim monitor's private modules - the sources live in a private
 859 # subdirectory. The final binary combines the private modules with some
 860 # modules from the main exim binary.
 861
 862 em_StripChart.o: ../exim_monitor/em_StripChart.c
 863 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 864 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 865 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 866 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 867 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 868 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 869 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 870 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 871 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 872 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 873 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 874 $(MONBIN): $(HDRS)
 875                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 876                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 877                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 878
 879
 880 # Targets for the various libraries that Exim uses.
 881
 882 # The lookups library.
 883
 884 buildlookups: config
 885          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 886            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 887            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
 888            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
 889          @echo " "
 890
 891 # The routers library.
 892
 893 buildrouters: config
 894          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 895            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 896            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 897          @echo " "
 898
 899 # The transports library.
 900
 901 buildtransports: config
 902          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 903            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 904            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 905          @echo " "
 906
 907 # The library of authorization modules
 908
 909 buildauths: config
 910          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 911            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 912            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 913          @echo " "
 914
 915 # The PDKIM library
 916
 917 buildpdkim: pdkim/pdkim.a
 918 pdkim/pdkim.a: config
 919          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 920            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 921            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 922          @echo " "
 923
 924 # The "clean", "install", and "makefile" targets just pass themselves back to
 925 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 926 # for them in the build directory.
 927
 928 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 929
 930 # Targets for building stand-alone testing programs for basic testing of
 931 # some of the building blocks. These are not integrated with the makefile-
 932 # building targets. If you change something that is going to cause the
 933 # makefile to be rebuilt, you must run "make makefile" before running one
 934 # of these.
 935
 936 # The testing programs use different versions of some modules - usually
 937 # with bits cut out that are not relevant to the test in hand. For those
 938 # that are used by several tests, we use a different name.
 939
 940 sa-globals.o:    $(HDRS) globals.c
 941         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 942
 943 sa-os.o:         $(HDRS) os.c
 944         $(CC) -c $(CFLAGS) $(INCLUDE) \
 945                                       -DFIND_RUNNING_INTERFACES \
 946                                       -o sa-os.o os.c
 947
 948 # These are the test targets themselves
 949
 950 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 951                string.o tod.o version.o utf8.o
 952         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 953         $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
 954         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 955           dummies.o sa-globals.o sa-os.o store.o string.o \
 956           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 957         rm -f dbfn.o store.o
 958
 959 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 960                store.o string.o tod.o tree.o
 961         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 962         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 963         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 964         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 965         $(LNCC) -o test_host $(LFLAGS) \
 966           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 967           tod.o tree.o $(LIBS) $(LIBRESOLV)
 968         rm -f child.o dummies.o host.o dns.o
 969
 970 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 971         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 972         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 973           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 974         rm -f os.o
 975
 976 test_parse:  config.h parse.c dummies.o sa-globals.o \
 977              store.o string.o tod.o version.o utf8.o
 978         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 979         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 980           dummies.o sa-globals.o store.o string.o tod.o version.o \
 981           utf8.o $(LDFLAGS)
 982         rm -f parse.o
 983
 984 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 985         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 986         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 987           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 988         rm -f string.o
 989
 990 # End