Commit | Line | Data |
---|---|---|
4311097e | 1 | /* $Cambridge: exim/src/src/transports/smtp.c,v 1.36 2007/02/08 15:16:19 ph10 Exp $ */ |
0756eb3c PH |
2 | |
3 | /************************************************* | |
4 | * Exim - an Internet mail transport agent * | |
5 | *************************************************/ | |
6 | ||
184e8823 | 7 | /* Copyright (c) University of Cambridge 1995 - 2007 */ |
0756eb3c PH |
8 | /* See the file NOTICE for conditions of use and distribution. */ |
9 | ||
10 | #include "../exim.h" | |
11 | #include "smtp.h" | |
12 | ||
13 | #define PENDING 256 | |
14 | #define PENDING_DEFER (PENDING + DEFER) | |
15 | #define PENDING_OK (PENDING + OK) | |
16 | ||
17 | ||
18 | /* Options specific to the smtp transport. This transport also supports LMTP | |
19 | over TCP/IP. The options must be in alphabetic order (note that "_" comes | |
20 | before the lower case letters). Some live in the transport_instance block so as | |
21 | to be publicly visible; these are flagged with opt_public. */ | |
22 | ||
23 | optionlist smtp_transport_options[] = { | |
48c7f9e2 PH |
24 | { "address_retry_include_sender", opt_bool, |
25 | (void *)offsetof(smtp_transport_options_block, address_retry_include_sender) }, | |
0756eb3c PH |
26 | { "allow_localhost", opt_bool, |
27 | (void *)offsetof(smtp_transport_options_block, allow_localhost) }, | |
28 | { "authenticated_sender", opt_stringptr, | |
29 | (void *)offsetof(smtp_transport_options_block, authenticated_sender) }, | |
382afc6b PH |
30 | { "authenticated_sender_force", opt_bool, |
31 | (void *)offsetof(smtp_transport_options_block, authenticated_sender_force) }, | |
0756eb3c PH |
32 | { "command_timeout", opt_time, |
33 | (void *)offsetof(smtp_transport_options_block, command_timeout) }, | |
34 | { "connect_timeout", opt_time, | |
35 | (void *)offsetof(smtp_transport_options_block, connect_timeout) }, | |
36 | { "connection_max_messages", opt_int | opt_public, | |
37 | (void *)offsetof(transport_instance, connection_max_messages) }, | |
38 | { "data_timeout", opt_time, | |
39 | (void *)offsetof(smtp_transport_options_block, data_timeout) }, | |
40 | { "delay_after_cutoff", opt_bool, | |
41 | (void *)offsetof(smtp_transport_options_block, delay_after_cutoff) }, | |
fb2274d4 TK |
42 | #ifdef EXPERIMENTAL_DOMAINKEYS |
43 | { "dk_canon", opt_stringptr, | |
44 | (void *)offsetof(smtp_transport_options_block, dk_canon) }, | |
45 | { "dk_domain", opt_stringptr, | |
46 | (void *)offsetof(smtp_transport_options_block, dk_domain) }, | |
47 | { "dk_headers", opt_stringptr, | |
48 | (void *)offsetof(smtp_transport_options_block, dk_headers) }, | |
49 | { "dk_private_key", opt_stringptr, | |
50 | (void *)offsetof(smtp_transport_options_block, dk_private_key) }, | |
51 | { "dk_selector", opt_stringptr, | |
52 | (void *)offsetof(smtp_transport_options_block, dk_selector) }, | |
53 | { "dk_strict", opt_stringptr, | |
54 | (void *)offsetof(smtp_transport_options_block, dk_strict) }, | |
55 | #endif | |
0756eb3c PH |
56 | { "dns_qualify_single", opt_bool, |
57 | (void *)offsetof(smtp_transport_options_block, dns_qualify_single) }, | |
58 | { "dns_search_parents", opt_bool, | |
59 | (void *)offsetof(smtp_transport_options_block, dns_search_parents) }, | |
60 | { "fallback_hosts", opt_stringptr, | |
61 | (void *)offsetof(smtp_transport_options_block, fallback_hosts) }, | |
62 | { "final_timeout", opt_time, | |
63 | (void *)offsetof(smtp_transport_options_block, final_timeout) }, | |
64 | { "gethostbyname", opt_bool, | |
65 | (void *)offsetof(smtp_transport_options_block, gethostbyname) }, | |
83da1223 PH |
66 | #ifdef SUPPORT_TLS |
67 | { "gnutls_require_kx", opt_stringptr, | |
68 | (void *)offsetof(smtp_transport_options_block, gnutls_require_kx) }, | |
69 | { "gnutls_require_mac", opt_stringptr, | |
70 | (void *)offsetof(smtp_transport_options_block, gnutls_require_mac) }, | |
71 | { "gnutls_require_protocols", opt_stringptr, | |
72 | (void *)offsetof(smtp_transport_options_block, gnutls_require_proto) }, | |
73 | #endif | |
0756eb3c PH |
74 | { "helo_data", opt_stringptr, |
75 | (void *)offsetof(smtp_transport_options_block, helo_data) }, | |
76 | { "hosts", opt_stringptr, | |
77 | (void *)offsetof(smtp_transport_options_block, hosts) }, | |
78 | { "hosts_avoid_esmtp", opt_stringptr, | |
79 | (void *)offsetof(smtp_transport_options_block, hosts_avoid_esmtp) }, | |
c51b8e75 PH |
80 | { "hosts_avoid_pipelining", opt_stringptr, |
81 | (void *)offsetof(smtp_transport_options_block, hosts_avoid_pipelining) }, | |
0756eb3c PH |
82 | #ifdef SUPPORT_TLS |
83 | { "hosts_avoid_tls", opt_stringptr, | |
84 | (void *)offsetof(smtp_transport_options_block, hosts_avoid_tls) }, | |
85 | #endif | |
86 | { "hosts_max_try", opt_int, | |
87 | (void *)offsetof(smtp_transport_options_block, hosts_max_try) }, | |
533244af PH |
88 | { "hosts_max_try_hardlimit", opt_int, |
89 | (void *)offsetof(smtp_transport_options_block, hosts_max_try_hardlimit) }, | |
0756eb3c PH |
90 | #ifdef SUPPORT_TLS |
91 | { "hosts_nopass_tls", opt_stringptr, | |
92 | (void *)offsetof(smtp_transport_options_block, hosts_nopass_tls) }, | |
93 | #endif | |
94 | { "hosts_override", opt_bool, | |
95 | (void *)offsetof(smtp_transport_options_block, hosts_override) }, | |
96 | { "hosts_randomize", opt_bool, | |
97 | (void *)offsetof(smtp_transport_options_block, hosts_randomize) }, | |
98 | { "hosts_require_auth", opt_stringptr, | |
99 | (void *)offsetof(smtp_transport_options_block, hosts_require_auth) }, | |
100 | #ifdef SUPPORT_TLS | |
101 | { "hosts_require_tls", opt_stringptr, | |
102 | (void *)offsetof(smtp_transport_options_block, hosts_require_tls) }, | |
103 | #endif | |
104 | { "hosts_try_auth", opt_stringptr, | |
105 | (void *)offsetof(smtp_transport_options_block, hosts_try_auth) }, | |
106 | { "interface", opt_stringptr, | |
107 | (void *)offsetof(smtp_transport_options_block, interface) }, | |
108 | { "keepalive", opt_bool, | |
109 | (void *)offsetof(smtp_transport_options_block, keepalive) }, | |
f1513293 PH |
110 | { "lmtp_ignore_quota", opt_bool, |
111 | (void *)offsetof(smtp_transport_options_block, lmtp_ignore_quota) }, | |
0756eb3c PH |
112 | { "max_rcpt", opt_int | opt_public, |
113 | (void *)offsetof(transport_instance, max_addresses) }, | |
114 | { "multi_domain", opt_bool | opt_public, | |
115 | (void *)offsetof(transport_instance, multi_domain) }, | |
116 | { "port", opt_stringptr, | |
117 | (void *)offsetof(smtp_transport_options_block, port) }, | |
118 | { "protocol", opt_stringptr, | |
119 | (void *)offsetof(smtp_transport_options_block, protocol) }, | |
120 | { "retry_include_ip_address", opt_bool, | |
121 | (void *)offsetof(smtp_transport_options_block, retry_include_ip_address) }, | |
122 | { "serialize_hosts", opt_stringptr, | |
123 | (void *)offsetof(smtp_transport_options_block, serialize_hosts) }, | |
124 | { "size_addition", opt_int, | |
125 | (void *)offsetof(smtp_transport_options_block, size_addition) } | |
126 | #ifdef SUPPORT_TLS | |
127 | ,{ "tls_certificate", opt_stringptr, | |
128 | (void *)offsetof(smtp_transport_options_block, tls_certificate) }, | |
129 | { "tls_crl", opt_stringptr, | |
130 | (void *)offsetof(smtp_transport_options_block, tls_crl) }, | |
131 | { "tls_privatekey", opt_stringptr, | |
132 | (void *)offsetof(smtp_transport_options_block, tls_privatekey) }, | |
133 | { "tls_require_ciphers", opt_stringptr, | |
134 | (void *)offsetof(smtp_transport_options_block, tls_require_ciphers) }, | |
135 | { "tls_tempfail_tryclear", opt_bool, | |
136 | (void *)offsetof(smtp_transport_options_block, tls_tempfail_tryclear) }, | |
137 | { "tls_verify_certificates", opt_stringptr, | |
138 | (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) } | |
139 | #endif | |
140 | }; | |
141 | ||
142 | /* Size of the options list. An extern variable has to be used so that its | |
143 | address can appear in the tables drtables.c. */ | |
144 | ||
145 | int smtp_transport_options_count = | |
146 | sizeof(smtp_transport_options)/sizeof(optionlist); | |
147 | ||
148 | /* Default private options block for the smtp transport. */ | |
149 | ||
150 | smtp_transport_options_block smtp_transport_option_defaults = { | |
151 | NULL, /* hosts */ | |
152 | NULL, /* fallback_hosts */ | |
153 | NULL, /* hostlist */ | |
154 | NULL, /* fallback_hostlist */ | |
155 | NULL, /* authenticated_sender */ | |
156 | US"$primary_hostname", /* helo_data */ | |
157 | NULL, /* interface */ | |
158 | NULL, /* port */ | |
159 | US"smtp", /* protocol */ | |
160 | NULL, /* serialize_hosts */ | |
161 | NULL, /* hosts_try_auth */ | |
162 | NULL, /* hosts_require_auth */ | |
163 | NULL, /* hosts_require_tls */ | |
164 | NULL, /* hosts_avoid_tls */ | |
c51b8e75 | 165 | NULL, /* hosts_avoid_pipelining */ |
0756eb3c PH |
166 | NULL, /* hosts_avoid_esmtp */ |
167 | NULL, /* hosts_nopass_tls */ | |
168 | 5*60, /* command_timeout */ | |
169 | 5*60, /* connect_timeout; shorter system default overrides */ | |
170 | 5*60, /* data timeout */ | |
171 | 10*60, /* final timeout */ | |
172 | 1024, /* size_addition */ | |
173 | 5, /* hosts_max_try */ | |
8e669ac1 | 174 | 50, /* hosts_max_try_hardlimit */ |
48c7f9e2 | 175 | TRUE, /* address_retry_include_sender */ |
0756eb3c | 176 | FALSE, /* allow_localhost */ |
382afc6b | 177 | FALSE, /* authenticated_sender_force */ |
0756eb3c PH |
178 | FALSE, /* gethostbyname */ |
179 | TRUE, /* dns_qualify_single */ | |
180 | FALSE, /* dns_search_parents */ | |
181 | TRUE, /* delay_after_cutoff */ | |
182 | FALSE, /* hosts_override */ | |
183 | FALSE, /* hosts_randomize */ | |
184 | TRUE, /* keepalive */ | |
f1513293 | 185 | FALSE, /* lmtp_ignore_quota */ |
0756eb3c PH |
186 | TRUE /* retry_include_ip_address */ |
187 | #ifdef SUPPORT_TLS | |
188 | ,NULL, /* tls_certificate */ | |
189 | NULL, /* tls_crl */ | |
190 | NULL, /* tls_privatekey */ | |
191 | NULL, /* tls_require_ciphers */ | |
83da1223 PH |
192 | NULL, /* gnutls_require_kx */ |
193 | NULL, /* gnutls_require_mac */ | |
194 | NULL, /* gnutls_require_proto */ | |
0756eb3c PH |
195 | NULL, /* tls_verify_certificates */ |
196 | TRUE /* tls_tempfail_tryclear */ | |
197 | #endif | |
fb2274d4 TK |
198 | #ifdef EXPERIMENTAL_DOMAINKEYS |
199 | ,NULL, /* dk_canon */ | |
200 | NULL, /* dk_domain */ | |
201 | NULL, /* dk_headers */ | |
202 | NULL, /* dk_private_key */ | |
203 | NULL, /* dk_selector */ | |
204 | NULL /* dk_strict */ | |
205 | #endif | |
0756eb3c PH |
206 | }; |
207 | ||
208 | ||
209 | /* Local statics */ | |
210 | ||
211 | static uschar *smtp_command; /* Points to last cmd for error messages */ | |
212 | static uschar *mail_command; /* Points to MAIL cmd for error messages */ | |
f6c332bd | 213 | static BOOL update_waiting; /* TRUE to update the "wait" database */ |
0756eb3c PH |
214 | |
215 | ||
216 | /************************************************* | |
217 | * Setup entry point * | |
218 | *************************************************/ | |
219 | ||
220 | /* This function is called when the transport is about to be used, | |
221 | but before running it in a sub-process. It is used for two things: | |
222 | ||
223 | (1) To set the fallback host list in addresses, when delivering. | |
26da7e20 PH |
224 | (2) To pass back the interface, port, protocol, and other options, for use |
225 | during callout verification. | |
0756eb3c PH |
226 | |
227 | Arguments: | |
228 | tblock pointer to the transport instance block | |
229 | addrlist list of addresses about to be transported | |
230 | tf if not NULL, pointer to block in which to return options | |
929ba01c PH |
231 | uid the uid that will be set (not used) |
232 | gid the gid that will be set (not used) | |
0756eb3c PH |
233 | errmsg place for error message (not used) |
234 | ||
235 | Returns: OK always (FAIL, DEFER not used) | |
236 | */ | |
237 | ||
238 | static int | |
239 | smtp_transport_setup(transport_instance *tblock, address_item *addrlist, | |
929ba01c | 240 | transport_feedback *tf, uid_t uid, gid_t gid, uschar **errmsg) |
0756eb3c PH |
241 | { |
242 | smtp_transport_options_block *ob = | |
243 | (smtp_transport_options_block *)(tblock->options_block); | |
244 | ||
245 | errmsg = errmsg; /* Keep picky compilers happy */ | |
929ba01c PH |
246 | uid = uid; |
247 | gid = gid; | |
0756eb3c PH |
248 | |
249 | /* Pass back options if required. This interface is getting very messy. */ | |
250 | ||
251 | if (tf != NULL) | |
252 | { | |
253 | tf->interface = ob->interface; | |
254 | tf->port = ob->port; | |
255 | tf->protocol = ob->protocol; | |
256 | tf->hosts = ob->hosts; | |
257 | tf->hosts_override = ob->hosts_override; | |
258 | tf->hosts_randomize = ob->hosts_randomize; | |
259 | tf->gethostbyname = ob->gethostbyname; | |
260 | tf->qualify_single = ob->dns_qualify_single; | |
261 | tf->search_parents = ob->dns_search_parents; | |
26da7e20 | 262 | tf->helo_data = ob->helo_data; |
0756eb3c PH |
263 | } |
264 | ||
265 | /* Set the fallback host list for all the addresses that don't have fallback | |
266 | host lists, provided that the local host wasn't present in the original host | |
267 | list. */ | |
268 | ||
269 | if (!testflag(addrlist, af_local_host_removed)) | |
270 | { | |
271 | for (; addrlist != NULL; addrlist = addrlist->next) | |
272 | if (addrlist->fallback_hosts == NULL) | |
273 | addrlist->fallback_hosts = ob->fallback_hostlist; | |
274 | } | |
275 | ||
276 | return OK; | |
277 | } | |
278 | ||
279 | ||
280 | ||
281 | /************************************************* | |
282 | * Initialization entry point * | |
283 | *************************************************/ | |
284 | ||
285 | /* Called for each instance, after its options have been read, to | |
286 | enable consistency checks to be done, or anything else that needs | |
287 | to be set up. | |
288 | ||
289 | Argument: pointer to the transport instance block | |
290 | Returns: nothing | |
291 | */ | |
292 | ||
293 | void | |
294 | smtp_transport_init(transport_instance *tblock) | |
295 | { | |
296 | smtp_transport_options_block *ob = | |
297 | (smtp_transport_options_block *)(tblock->options_block); | |
298 | ||
299 | /* Retry_use_local_part defaults FALSE if unset */ | |
300 | ||
301 | if (tblock->retry_use_local_part == TRUE_UNSET) | |
302 | tblock->retry_use_local_part = FALSE; | |
303 | ||
304 | /* Set the default port according to the protocol */ | |
305 | ||
306 | if (ob->port == NULL) | |
307 | ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" : US"smtp"; | |
308 | ||
309 | /* Set up the setup entry point, to be called before subprocesses for this | |
310 | transport. */ | |
311 | ||
312 | tblock->setup = smtp_transport_setup; | |
313 | ||
314 | /* Complain if any of the timeouts are zero. */ | |
315 | ||
316 | if (ob->command_timeout <= 0 || ob->data_timeout <= 0 || | |
317 | ob->final_timeout <= 0) | |
318 | log_write(0, LOG_PANIC_DIE|LOG_CONFIG, | |
319 | "command, data, or final timeout value is zero for %s transport", | |
320 | tblock->name); | |
321 | ||
322 | /* If hosts_override is set and there are local hosts, set the global | |
323 | flag that stops verify from showing router hosts. */ | |
324 | ||
325 | if (ob->hosts_override && ob->hosts != NULL) tblock->overrides_hosts = TRUE; | |
326 | ||
327 | /* If there are any fallback hosts listed, build a chain of host items | |
328 | for them, but do not do any lookups at this time. */ | |
329 | ||
330 | host_build_hostlist(&(ob->fallback_hostlist), ob->fallback_hosts, FALSE); | |
331 | } | |
332 | ||
333 | ||
334 | ||
335 | ||
336 | ||
337 | /************************************************* | |
338 | * Set delivery info into all active addresses * | |
339 | *************************************************/ | |
340 | ||
341 | /* Only addresses whose status is >= PENDING are relevant. A lesser | |
342 | status means that an address is not currently being processed. | |
343 | ||
344 | Arguments: | |
447d236c PH |
345 | addrlist points to a chain of addresses |
346 | errno_value to put in each address's errno field | |
347 | msg to put in each address's message field | |
348 | rc to put in each address's transport_return field | |
349 | pass_message if TRUE, set the "pass message" flag in the address | |
0756eb3c PH |
350 | |
351 | If errno_value has the special value ERRNO_CONNECTTIMEOUT, ETIMEDOUT is put in | |
352 | the errno field, and RTEF_CTOUT is ORed into the more_errno field, to indicate | |
353 | this particular type of timeout. | |
354 | ||
355 | Returns: nothing | |
356 | */ | |
357 | ||
7cd1141b PH |
358 | static void |
359 | set_errno(address_item *addrlist, int errno_value, uschar *msg, int rc, | |
447d236c | 360 | BOOL pass_message) |
0756eb3c PH |
361 | { |
362 | address_item *addr; | |
363 | int orvalue = 0; | |
364 | if (errno_value == ERRNO_CONNECTTIMEOUT) | |
365 | { | |
366 | errno_value = ETIMEDOUT; | |
367 | orvalue = RTEF_CTOUT; | |
368 | } | |
369 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
370 | { | |
371 | if (addr->transport_return < PENDING) continue; | |
372 | addr->basic_errno = errno_value; | |
373 | addr->more_errno |= orvalue; | |
447d236c PH |
374 | if (msg != NULL) |
375 | { | |
376 | addr->message = msg; | |
377 | if (pass_message) setflag(addr, af_pass_message); | |
378 | } | |
0756eb3c PH |
379 | addr->transport_return = rc; |
380 | } | |
381 | } | |
382 | ||
383 | ||
384 | ||
385 | /************************************************* | |
386 | * Check an SMTP response * | |
387 | *************************************************/ | |
388 | ||
389 | /* This function is given an errno code and the SMTP response buffer | |
390 | to analyse, together with the host identification for generating messages. It | |
391 | sets an appropriate message and puts the first digit of the response code into | |
392 | the yield variable. If no response was actually read, a suitable digit is | |
393 | chosen. | |
394 | ||
395 | Arguments: | |
447d236c PH |
396 | host the current host, to get its name for messages |
397 | errno_value pointer to the errno value | |
398 | more_errno from the top address for use with ERRNO_FILTER_FAIL | |
399 | buffer the SMTP response buffer | |
400 | yield where to put a one-digit SMTP response code | |
401 | message where to put an errror message | |
402 | pass_message set TRUE if message is an SMTP response | |
403 | ||
404 | Returns: TRUE if an SMTP "QUIT" command should be sent, else FALSE | |
0756eb3c PH |
405 | */ |
406 | ||
407 | static BOOL check_response(host_item *host, int *errno_value, int more_errno, | |
447d236c | 408 | uschar *buffer, int *yield, uschar **message, BOOL *pass_message) |
0756eb3c PH |
409 | { |
410 | uschar *pl = US""; | |
411 | ||
412 | if (smtp_use_pipelining && | |
413 | (Ustrcmp(smtp_command, "MAIL") == 0 || | |
414 | Ustrcmp(smtp_command, "RCPT") == 0 || | |
415 | Ustrcmp(smtp_command, "DATA") == 0)) | |
416 | pl = US"pipelined "; | |
417 | ||
418 | *yield = '4'; /* Default setting is to give a temporary error */ | |
419 | ||
420 | /* Handle response timeout */ | |
421 | ||
422 | if (*errno_value == ETIMEDOUT) | |
423 | { | |
424 | *message = US string_sprintf("SMTP timeout while connected to %s [%s] " | |
425 | "after %s%s", host->name, host->address, pl, smtp_command); | |
426 | if (transport_count > 0) | |
427 | *message = US string_sprintf("%s (%d bytes written)", *message, | |
428 | transport_count); | |
429 | return FALSE; | |
430 | } | |
431 | ||
432 | /* Handle malformed SMTP response */ | |
433 | ||
434 | if (*errno_value == ERRNO_SMTPFORMAT) | |
435 | { | |
436 | uschar *malfresp = string_printing(buffer); | |
437 | while (isspace(*malfresp)) malfresp++; | |
438 | if (*malfresp == 0) | |
439 | *message = string_sprintf("Malformed SMTP reply (an empty line) from " | |
440 | "%s [%s] in response to %s%s", host->name, host->address, pl, | |
441 | smtp_command); | |
442 | else | |
443 | *message = string_sprintf("Malformed SMTP reply from %s [%s] in response " | |
444 | "to %s%s: %s", host->name, host->address, pl, smtp_command, malfresp); | |
445 | return FALSE; | |
446 | } | |
447 | ||
448 | /* Handle a failed filter process error; can't send QUIT as we mustn't | |
449 | end the DATA. */ | |
450 | ||
451 | if (*errno_value == ERRNO_FILTER_FAIL) | |
452 | { | |
35af9f61 | 453 | *message = US string_sprintf("transport filter process failed (%d)%s", |
8e669ac1 | 454 | more_errno, |
35af9f61 | 455 | (more_errno == EX_EXECFAILED)? ": unable to execute command" : ""); |
0756eb3c PH |
456 | return FALSE; |
457 | } | |
458 | ||
459 | /* Handle a failed add_headers expansion; can't send QUIT as we mustn't | |
460 | end the DATA. */ | |
461 | ||
462 | if (*errno_value == ERRNO_CHHEADER_FAIL) | |
463 | { | |
464 | *message = | |
465 | US string_sprintf("failed to expand headers_add or headers_remove: %s", | |
466 | expand_string_message); | |
467 | return FALSE; | |
468 | } | |
469 | ||
470 | /* Handle failure to write a complete data block */ | |
471 | ||
472 | if (*errno_value == ERRNO_WRITEINCOMPLETE) | |
473 | { | |
474 | *message = US string_sprintf("failed to write a data block"); | |
475 | return FALSE; | |
476 | } | |
477 | ||
478 | /* Handle error responses from the remote mailer. */ | |
479 | ||
480 | if (buffer[0] != 0) | |
481 | { | |
482 | uschar *s = string_printing(buffer); | |
447d236c | 483 | *message = US string_sprintf("SMTP error from remote mail server after %s%s: " |
0756eb3c | 484 | "host %s [%s]: %s", pl, smtp_command, host->name, host->address, s); |
447d236c | 485 | *pass_message = TRUE; |
0756eb3c PH |
486 | *yield = buffer[0]; |
487 | return TRUE; | |
488 | } | |
489 | ||
490 | /* No data was read. If there is no errno, this must be the EOF (i.e. | |
19b9dc85 PH |
491 | connection closed) case, which causes deferral. An explicit connection reset |
492 | error has the same effect. Otherwise, put the host's identity in the message, | |
493 | leaving the errno value to be interpreted as well. In all cases, we have to | |
494 | assume the connection is now dead. */ | |
0756eb3c | 495 | |
19b9dc85 | 496 | if (*errno_value == 0 || *errno_value == ECONNRESET) |
0756eb3c PH |
497 | { |
498 | *errno_value = ERRNO_SMTPCLOSED; | |
499 | *message = US string_sprintf("Remote host %s [%s] closed connection " | |
500 | "in response to %s%s", host->name, host->address, pl, smtp_command); | |
501 | } | |
502 | else *message = US string_sprintf("%s [%s]", host->name, host->address); | |
503 | ||
504 | return FALSE; | |
505 | } | |
506 | ||
507 | ||
508 | ||
509 | /************************************************* | |
510 | * Write error message to logs * | |
511 | *************************************************/ | |
512 | ||
513 | /* This writes to the main log and to the message log. | |
514 | ||
515 | Arguments: | |
516 | addr the address item containing error information | |
517 | host the current host | |
518 | ||
519 | Returns: nothing | |
520 | */ | |
521 | ||
522 | static void | |
523 | write_logs(address_item *addr, host_item *host) | |
524 | { | |
525 | if (addr->message != NULL) | |
526 | { | |
527 | uschar *message = addr->message; | |
528 | if (addr->basic_errno > 0) | |
529 | message = string_sprintf("%s: %s", message, strerror(addr->basic_errno)); | |
530 | log_write(0, LOG_MAIN, "%s", message); | |
531 | deliver_msglog("%s %s\n", tod_stamp(tod_log), message); | |
532 | } | |
533 | else | |
534 | { | |
7cd1141b PH |
535 | uschar *msg = |
536 | ((log_extra_selector & LX_outgoing_port) != 0)? | |
537 | string_sprintf("%s [%s]:%d", host->name, host->address, | |
538 | (host->port == PORT_NONE)? 25 : host->port) | |
539 | : | |
540 | string_sprintf("%s [%s]", host->name, host->address); | |
541 | log_write(0, LOG_MAIN, "%s %s", msg, strerror(addr->basic_errno)); | |
542 | deliver_msglog("%s %s %s\n", tod_stamp(tod_log), msg, | |
0756eb3c PH |
543 | strerror(addr->basic_errno)); |
544 | } | |
545 | } | |
546 | ||
547 | ||
548 | ||
549 | /************************************************* | |
550 | * Synchronize SMTP responses * | |
551 | *************************************************/ | |
552 | ||
553 | /* This function is called from smtp_deliver() to receive SMTP responses from | |
554 | the server, and match them up with the commands to which they relate. When | |
555 | PIPELINING is not in use, this function is called after every command, and is | |
556 | therefore somewhat over-engineered, but it is simpler to use a single scheme | |
557 | that works both with and without PIPELINING instead of having two separate sets | |
558 | of code. | |
559 | ||
560 | The set of commands that are buffered up with pipelining may start with MAIL | |
561 | and may end with DATA; in between are RCPT commands that correspond to the | |
562 | addresses whose status is PENDING_DEFER. All other commands (STARTTLS, AUTH, | |
563 | etc.) are never buffered. | |
564 | ||
565 | Errors after MAIL or DATA abort the whole process leaving the response in the | |
566 | buffer. After MAIL, pending responses are flushed, and the original command is | |
567 | re-instated in big_buffer for error messages. For RCPT commands, the remote is | |
568 | permitted to reject some recipient addresses while accepting others. However | |
569 | certain errors clearly abort the whole process. Set the value in | |
570 | transport_return to PENDING_OK if the address is accepted. If there is a | |
571 | subsequent general error, it will get reset accordingly. If not, it will get | |
572 | converted to OK at the end. | |
573 | ||
574 | Arguments: | |
48c7f9e2 PH |
575 | addrlist the complete address list |
576 | include_affixes TRUE if affixes include in RCPT | |
577 | sync_addr ptr to the ptr of the one to start scanning at (updated) | |
578 | host the host we are connected to | |
579 | count the number of responses to read | |
580 | address_retry_ | |
581 | include_sender true if 4xx retry is to include the sender it its key | |
582 | pending_MAIL true if the first response is for MAIL | |
583 | pending_DATA 0 if last command sent was not DATA | |
584 | +1 if previously had a good recipient | |
585 | -1 if not previously had a good recipient | |
586 | inblock incoming SMTP block | |
587 | timeout timeout value | |
588 | buffer buffer for reading response | |
589 | buffsize size of buffer | |
0756eb3c PH |
590 | |
591 | Returns: 3 if at least one address had 2xx and one had 5xx | |
592 | 2 if at least one address had 5xx but none had 2xx | |
593 | 1 if at least one host had a 2xx response, but none had 5xx | |
594 | 0 no address had 2xx or 5xx but no errors (all 4xx, or just DATA) | |
595 | -1 timeout while reading RCPT response | |
596 | -2 I/O or other non-response error for RCPT | |
597 | -3 DATA or MAIL failed - errno and buffer set | |
598 | */ | |
599 | ||
600 | static int | |
601 | sync_responses(address_item *addrlist, BOOL include_affixes, | |
48c7f9e2 PH |
602 | address_item **sync_addr, host_item *host, int count, |
603 | BOOL address_retry_include_sender, BOOL pending_MAIL, | |
0756eb3c PH |
604 | int pending_DATA, smtp_inblock *inblock, int timeout, uschar *buffer, |
605 | int buffsize) | |
606 | { | |
607 | address_item *addr = *sync_addr; | |
608 | int yield = 0; | |
609 | ||
610 | /* Handle the response for a MAIL command. On error, reinstate the original | |
611 | command in big_buffer for error message use, and flush any further pending | |
612 | responses before returning, except after I/O errors and timeouts. */ | |
613 | ||
614 | if (pending_MAIL) | |
615 | { | |
616 | count--; | |
617 | if (!smtp_read_response(inblock, buffer, buffsize, '2', timeout)) | |
618 | { | |
619 | Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */ | |
620 | if (errno == 0 && buffer[0] != 0) | |
621 | { | |
622 | uschar flushbuffer[4096]; | |
e97957bc PH |
623 | int save_errno = 0; |
624 | if (buffer[0] == '4') | |
625 | { | |
626 | save_errno = ERRNO_MAIL4XX; | |
627 | addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8; | |
628 | } | |
0756eb3c PH |
629 | while (count-- > 0) |
630 | { | |
631 | if (!smtp_read_response(inblock, flushbuffer, sizeof(flushbuffer), | |
632 | '2', timeout) | |
633 | && (errno != 0 || flushbuffer[0] == 0)) | |
634 | break; | |
635 | } | |
e97957bc | 636 | errno = save_errno; |
0756eb3c PH |
637 | } |
638 | return -3; | |
639 | } | |
640 | } | |
641 | ||
642 | if (pending_DATA) count--; /* Number of RCPT responses to come */ | |
643 | ||
644 | /* Read and handle the required number of RCPT responses, matching each one up | |
645 | with an address by scanning for the next address whose status is PENDING_DEFER. | |
646 | */ | |
647 | ||
648 | while (count-- > 0) | |
649 | { | |
650 | while (addr->transport_return != PENDING_DEFER) addr = addr->next; | |
651 | ||
652 | /* The address was accepted */ | |
653 | ||
654 | if (smtp_read_response(inblock, buffer, buffsize, '2', timeout)) | |
655 | { | |
656 | yield |= 1; | |
657 | addr->transport_return = PENDING_OK; | |
658 | ||
659 | /* If af_dr_retry_exists is set, there was a routing delay on this address; | |
09945f1e PH |
660 | ensure that any address-specific retry record is expunged. We do this both |
661 | for the basic key and for the version that also includes the sender. */ | |
0756eb3c PH |
662 | |
663 | if (testflag(addr, af_dr_retry_exists)) | |
09945f1e PH |
664 | { |
665 | uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key, | |
666 | sender_address); | |
667 | retry_add_item(addr, altkey, rf_delete); | |
0756eb3c | 668 | retry_add_item(addr, addr->address_retry_key, rf_delete); |
09945f1e | 669 | } |
0756eb3c PH |
670 | } |
671 | ||
672 | /* Timeout while reading the response */ | |
673 | ||
674 | else if (errno == ETIMEDOUT) | |
675 | { | |
676 | int save_errno = errno; | |
677 | uschar *message = string_sprintf("SMTP timeout while connected to %s [%s] " | |
678 | "after RCPT TO:<%s>", host->name, host->address, | |
679 | transport_rcpt_address(addr, include_affixes)); | |
447d236c | 680 | set_errno(addrlist, save_errno, message, DEFER, FALSE); |
0756eb3c | 681 | retry_add_item(addr, addr->address_retry_key, 0); |
f6c332bd | 682 | update_waiting = FALSE; |
0756eb3c PH |
683 | return -1; |
684 | } | |
685 | ||
686 | /* Handle other errors in obtaining an SMTP response by returning -1. This | |
687 | will cause all the addresses to be deferred. Restore the SMTP command in | |
688 | big_buffer for which we are checking the response, so the error message | |
689 | makes sense. */ | |
690 | ||
691 | else if (errno != 0 || buffer[0] == 0) | |
692 | { | |
693 | string_format(big_buffer, big_buffer_size, "RCPT TO:<%s>", | |
694 | transport_rcpt_address(addr, include_affixes)); | |
695 | return -2; | |
696 | } | |
697 | ||
698 | /* Handle SMTP permanent and temporary response codes. */ | |
699 | ||
700 | else | |
701 | { | |
702 | addr->message = | |
447d236c | 703 | string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: " |
0756eb3c PH |
704 | "host %s [%s]: %s", transport_rcpt_address(addr, include_affixes), |
705 | host->name, host->address, string_printing(buffer)); | |
447d236c | 706 | setflag(addr, af_pass_message); |
0756eb3c PH |
707 | deliver_msglog("%s %s\n", tod_stamp(tod_log), addr->message); |
708 | ||
709 | /* The response was 5xx */ | |
710 | ||
711 | if (buffer[0] == '5') | |
712 | { | |
713 | addr->transport_return = FAIL; | |
714 | yield |= 2; | |
715 | } | |
716 | ||
717 | /* The response was 4xx */ | |
718 | ||
719 | else | |
720 | { | |
0756eb3c PH |
721 | addr->transport_return = DEFER; |
722 | addr->basic_errno = ERRNO_RCPT4XX; | |
e97957bc | 723 | addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8; |
0756eb3c PH |
724 | |
725 | /* Log temporary errors if there are more hosts to be tried. */ | |
726 | ||
727 | if (host->next != NULL) log_write(0, LOG_MAIN, "%s", addr->message); | |
728 | ||
f6c332bd PH |
729 | /* Do not put this message on the list of those waiting for specific |
730 | hosts, as otherwise it is likely to be tried too often. */ | |
0756eb3c | 731 | |
f6c332bd | 732 | update_waiting = FALSE; |
0756eb3c | 733 | |
48c7f9e2 PH |
734 | /* Add a retry item for the address so that it doesn't get tried again |
735 | too soon. If address_retry_include_sender is true, add the sender address | |
736 | to the retry key. */ | |
0756eb3c | 737 | |
48c7f9e2 PH |
738 | if (address_retry_include_sender) |
739 | { | |
740 | uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key, | |
741 | sender_address); | |
742 | retry_add_item(addr, altkey, 0); | |
743 | } | |
744 | else retry_add_item(addr, addr->address_retry_key, 0); | |
0756eb3c PH |
745 | } |
746 | } | |
747 | } /* Loop for next RCPT response */ | |
748 | ||
749 | /* Update where to start at for the next block of responses, unless we | |
750 | have already handled all the addresses. */ | |
751 | ||
752 | if (addr != NULL) *sync_addr = addr->next; | |
753 | ||
754 | /* Handle a response to DATA. If we have not had any good recipients, either | |
755 | previously or in this block, the response is ignored. */ | |
756 | ||
757 | if (pending_DATA != 0 && | |
758 | !smtp_read_response(inblock, buffer, buffsize, '3', timeout)) | |
759 | { | |
760 | int code; | |
761 | uschar *msg; | |
447d236c | 762 | BOOL pass_message; |
e97957bc PH |
763 | if (pending_DATA > 0 || (yield & 1) != 0) |
764 | { | |
765 | if (errno == 0 && buffer[0] == '4') | |
766 | { | |
767 | errno = ERRNO_DATA4XX; | |
768 | addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8; | |
769 | } | |
770 | return -3; | |
771 | } | |
447d236c | 772 | (void)check_response(host, &errno, 0, buffer, &code, &msg, &pass_message); |
0756eb3c PH |
773 | DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining " |
774 | "is in use and there were no good recipients\n", msg); | |
775 | } | |
776 | ||
777 | /* All responses read and handled; MAIL (if present) received 2xx and DATA (if | |
778 | present) received 3xx. If any RCPTs were handled and yielded anything other | |
779 | than 4xx, yield will be set non-zero. */ | |
780 | ||
781 | return yield; | |
782 | } | |
783 | ||
784 | ||
785 | ||
786 | /************************************************* | |
787 | * Deliver address list to given host * | |
788 | *************************************************/ | |
789 | ||
790 | /* If continue_hostname is not null, we get here only when continuing to | |
791 | deliver down an existing channel. The channel was passed as the standard | |
792 | input. | |
793 | ||
794 | Otherwise, we have to make a connection to the remote host, and do the | |
795 | initial protocol exchange. | |
796 | ||
797 | When running as an MUA wrapper, if the sender or any recipient is rejected, | |
798 | temporarily or permanently, we force failure for all recipients. | |
799 | ||
800 | Arguments: | |
801 | addrlist chain of potential addresses to deliver; only those whose | |
802 | transport_return field is set to PENDING_DEFER are currently | |
803 | being processed; others should be skipped - they have either | |
804 | been delivered to an earlier host or IP address, or been | |
805 | failed by one of them. | |
806 | host host to deliver to | |
807 | host_af AF_INET or AF_INET6 | |
2d280592 | 808 | port default TCP/IP port to use, in host byte order |
0756eb3c PH |
809 | interface interface to bind to, or NULL |
810 | tblock transport instance block | |
811 | copy_host TRUE if host set in addr->host_used must be copied, because | |
812 | it is specific to this call of the transport | |
813 | message_defer set TRUE if yield is OK, but all addresses were deferred | |
814 | because of a non-recipient, non-host failure, that is, a | |
815 | 4xx response to MAIL FROM, DATA, or ".". This is a defer | |
816 | that is specific to the message. | |
817 | suppress_tls if TRUE, don't attempt a TLS connection - this is set for | |
818 | a second attempt after TLS initialization fails | |
819 | ||
820 | Returns: OK - the connection was made and the delivery attempted; | |
821 | the result for each address is in its data block. | |
822 | DEFER - the connection could not be made, or something failed | |
823 | while setting up the SMTP session, or there was a | |
824 | non-message-specific error, such as a timeout. | |
825 | ERROR - a filter command is specified for this transport, | |
826 | and there was a problem setting it up; OR helo_data | |
827 | or add_headers or authenticated_sender is specified | |
828 | for this transport, and the string failed to expand | |
829 | */ | |
830 | ||
831 | static int | |
832 | smtp_deliver(address_item *addrlist, host_item *host, int host_af, int port, | |
833 | uschar *interface, transport_instance *tblock, BOOL copy_host, | |
834 | BOOL *message_defer, BOOL suppress_tls) | |
835 | { | |
836 | address_item *addr; | |
837 | address_item *sync_addr; | |
838 | address_item *first_addr = addrlist; | |
839 | int yield = OK; | |
840 | int address_count; | |
841 | int save_errno; | |
842 | int rc; | |
843 | time_t start_delivery_time = time(NULL); | |
844 | smtp_transport_options_block *ob = | |
845 | (smtp_transport_options_block *)(tblock->options_block); | |
846 | BOOL lmtp = strcmpic(ob->protocol, US"lmtp") == 0; | |
847 | BOOL ok = FALSE; | |
848 | BOOL send_rset = TRUE; | |
849 | BOOL send_quit = TRUE; | |
850 | BOOL setting_up = TRUE; | |
851 | BOOL completed_address = FALSE; | |
852 | BOOL esmtp = TRUE; | |
853 | BOOL pending_MAIL; | |
447d236c | 854 | BOOL pass_message = FALSE; |
0756eb3c PH |
855 | smtp_inblock inblock; |
856 | smtp_outblock outblock; | |
857 | int max_rcpt = tblock->max_addresses; | |
f1513293 | 858 | uschar *igquotstr = US""; |
0756eb3c | 859 | uschar *local_authenticated_sender = authenticated_sender; |
41c7c167 | 860 | uschar *helo_data = NULL; |
0756eb3c PH |
861 | uschar *message = NULL; |
862 | uschar new_message_id[MESSAGE_ID_LENGTH + 1]; | |
863 | uschar *p; | |
864 | uschar buffer[4096]; | |
865 | uschar inbuffer[4096]; | |
866 | uschar outbuffer[1024]; | |
867 | ||
868 | suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */ | |
869 | ||
870 | *message_defer = FALSE; | |
871 | smtp_command = US"initial connection"; | |
872 | if (max_rcpt == 0) max_rcpt = 999999; | |
873 | ||
874 | /* Set up the buffer for reading SMTP response packets. */ | |
875 | ||
876 | inblock.buffer = inbuffer; | |
877 | inblock.buffersize = sizeof(inbuffer); | |
878 | inblock.ptr = inbuffer; | |
879 | inblock.ptrend = inbuffer; | |
880 | ||
881 | /* Set up the buffer for holding SMTP commands while pipelining */ | |
882 | ||
883 | outblock.buffer = outbuffer; | |
884 | outblock.buffersize = sizeof(outbuffer); | |
885 | outblock.ptr = outbuffer; | |
886 | outblock.cmd_count = 0; | |
887 | outblock.authenticating = FALSE; | |
888 | ||
0756eb3c PH |
889 | /* If an authenticated_sender override has been specified for this transport |
890 | instance, expand it. If the expansion is forced to fail, and there was already | |
891 | an authenticated_sender for this message, the original value will be used. | |
892 | Other expansion failures are serious. An empty result is ignored, but there is | |
893 | otherwise no check - this feature is expected to be used with LMTP and other | |
894 | cases where non-standard addresses (e.g. without domains) might be required. */ | |
895 | ||
896 | if (ob->authenticated_sender != NULL) | |
897 | { | |
898 | uschar *new = expand_string(ob->authenticated_sender); | |
899 | if (new == NULL) | |
900 | { | |
901 | if (!expand_string_forcedfail) | |
902 | { | |
903 | uschar *message = string_sprintf("failed to expand " | |
904 | "authenticated_sender: %s", expand_string_message); | |
447d236c | 905 | set_errno(addrlist, 0, message, DEFER, FALSE); |
0756eb3c PH |
906 | return ERROR; |
907 | } | |
908 | } | |
909 | else if (new[0] != 0) local_authenticated_sender = new; | |
910 | } | |
911 | ||
912 | /* Make a connection to the host if this isn't a continued delivery, and handle | |
913 | the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled | |
914 | specially so they can be identified for retries. */ | |
915 | ||
916 | if (continue_hostname == NULL) | |
917 | { | |
918 | inblock.sock = outblock.sock = | |
919 | smtp_connect(host, host_af, port, interface, ob->connect_timeout, | |
4311097e PH |
920 | ob->keepalive); /* This puts port into host->port */ |
921 | ||
0756eb3c PH |
922 | if (inblock.sock < 0) |
923 | { | |
924 | set_errno(addrlist, (errno == ETIMEDOUT)? ERRNO_CONNECTTIMEOUT : errno, | |
447d236c | 925 | NULL, DEFER, FALSE); |
0756eb3c PH |
926 | return DEFER; |
927 | } | |
928 | ||
41c7c167 PH |
929 | /* Expand the greeting message while waiting for the initial response. (Makes |
930 | sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is | |
931 | delayed till here so that $sending_interface and $sending_port are set. */ | |
932 | ||
933 | helo_data = expand_string(ob->helo_data); | |
934 | ||
0756eb3c PH |
935 | /* The first thing is to wait for an initial OK response. The dreaded "goto" |
936 | is nevertheless a reasonably clean way of programming this kind of logic, | |
937 | where you want to escape on any error. */ | |
938 | ||
939 | if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
940 | ob->command_timeout)) goto RESPONSE_FAILED; | |
941 | ||
41c7c167 PH |
942 | /* Now check if the helo_data expansion went well, and sign off cleanly if it |
943 | didn't. */ | |
944 | ||
945 | if (helo_data == NULL) | |
946 | { | |
947 | uschar *message = string_sprintf("failed to expand helo_data: %s", | |
948 | expand_string_message); | |
949 | set_errno(addrlist, 0, message, DEFER, FALSE); | |
950 | yield = DEFER; | |
951 | goto SEND_QUIT; | |
952 | } | |
953 | ||
0756eb3c PH |
954 | /** Debugging without sending a message |
955 | addrlist->transport_return = DEFER; | |
956 | goto SEND_QUIT; | |
957 | **/ | |
958 | ||
959 | /* Errors that occur after this point follow an SMTP command, which is | |
960 | left in big_buffer by smtp_write_command() for use in error messages. */ | |
961 | ||
962 | smtp_command = big_buffer; | |
963 | ||
964 | /* Tell the remote who we are... | |
965 | ||
966 | February 1998: A convention has evolved that ESMTP-speaking MTAs include the | |
967 | string "ESMTP" in their greeting lines, so make Exim send EHLO if the | |
968 | greeting is of this form. The assumption was that the far end supports it | |
969 | properly... but experience shows that there are some that give 5xx responses, | |
970 | even though the banner includes "ESMTP" (there's a bloody-minded one that | |
971 | says "ESMTP not spoken here"). Cope with that case. | |
972 | ||
973 | September 2000: Time has passed, and it seems reasonable now to always send | |
974 | EHLO at the start. It is also convenient to make the change while installing | |
975 | the TLS stuff. | |
976 | ||
977 | July 2003: Joachim Wieland met a broken server that advertises "PIPELINING" | |
978 | but times out after sending MAIL FROM, RCPT TO and DATA all together. There | |
979 | would be no way to send out the mails, so there is now a host list | |
980 | "hosts_avoid_esmtp" that disables ESMTP for special hosts and solves the | |
981 | PIPELINING problem as well. Maybe it can also be useful to cure other | |
982 | problems with broken servers. | |
983 | ||
984 | Exim originally sent "Helo" at this point and ran for nearly a year that way. | |
985 | Then somebody tried it with a Microsoft mailer... It seems that all other | |
986 | mailers use upper case for some reason (the RFC is quite clear about case | |
987 | independence) so, for peace of mind, I gave in. */ | |
988 | ||
989 | esmtp = verify_check_this_host(&(ob->hosts_avoid_esmtp), NULL, | |
990 | host->name, host->address, NULL) != OK; | |
991 | ||
992 | if (esmtp) | |
993 | { | |
994 | if (smtp_write_command(&outblock, FALSE, "%s %s\r\n", | |
995 | lmtp? "LHLO" : "EHLO", helo_data) < 0) | |
996 | goto SEND_FAILED; | |
997 | if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
998 | ob->command_timeout)) | |
999 | { | |
1000 | if (errno != 0 || buffer[0] == 0 || lmtp) goto RESPONSE_FAILED; | |
1001 | esmtp = FALSE; | |
1002 | } | |
1003 | } | |
1004 | else | |
1005 | { | |
1006 | DEBUG(D_transport) | |
1007 | debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n"); | |
1008 | } | |
1009 | ||
1010 | if (!esmtp) | |
1011 | { | |
1012 | if (smtp_write_command(&outblock, FALSE, "HELO %s\r\n", helo_data) < 0) | |
1013 | goto SEND_FAILED; | |
1014 | if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
1015 | ob->command_timeout)) goto RESPONSE_FAILED; | |
1016 | } | |
1017 | ||
f1513293 PH |
1018 | /* Set IGNOREQUOTA if the response to LHLO specifies support and the |
1019 | lmtp_ignore_quota option was set. */ | |
1020 | ||
1021 | igquotstr = (lmtp && ob->lmtp_ignore_quota && | |
1022 | pcre_exec(regex_IGNOREQUOTA, NULL, CS buffer, Ustrlen(CS buffer), 0, | |
1023 | PCRE_EOPT, NULL, 0) >= 0)? US" IGNOREQUOTA" : US""; | |
1024 | ||
0756eb3c PH |
1025 | /* Set tls_offered if the response to EHLO specifies support for STARTTLS. */ |
1026 | ||
1027 | #ifdef SUPPORT_TLS | |
1028 | tls_offered = esmtp && | |
1029 | pcre_exec(regex_STARTTLS, NULL, CS buffer, Ustrlen(buffer), 0, | |
1030 | PCRE_EOPT, NULL, 0) >= 0; | |
1031 | #endif | |
1032 | } | |
1033 | ||
1034 | /* For continuing deliveries down the same channel, the socket is the standard | |
1035 | input, and we don't need to redo EHLO here (but may need to do so for TLS - see | |
1036 | below). Set up the pointer to where subsequent commands will be left, for | |
1037 | error messages. Note that smtp_use_size and smtp_use_pipelining will have been | |
1038 | set from the command line if they were set in the process that passed the | |
1039 | connection on. */ | |
1040 | ||
1041 | else | |
1042 | { | |
1043 | inblock.sock = outblock.sock = fileno(stdin); | |
1044 | smtp_command = big_buffer; | |
4311097e | 1045 | host->port = port; /* Record the port that was used */ |
0756eb3c PH |
1046 | } |
1047 | ||
1048 | /* If TLS is available on this connection, whether continued or not, attempt to | |
1049 | start up a TLS session, unless the host is in hosts_avoid_tls. If successful, | |
1050 | send another EHLO - the server may give a different answer in secure mode. We | |
1051 | use a separate buffer for reading the response to STARTTLS so that if it is | |
1052 | negative, the original EHLO data is available for subsequent analysis, should | |
1053 | the client not be required to use TLS. If the response is bad, copy the buffer | |
1054 | for error analysis. */ | |
1055 | ||
1056 | #ifdef SUPPORT_TLS | |
1057 | if (tls_offered && !suppress_tls && | |
1058 | verify_check_this_host(&(ob->hosts_avoid_tls), NULL, host->name, | |
1059 | host->address, NULL) != OK) | |
1060 | { | |
1061 | uschar buffer2[4096]; | |
1062 | if (smtp_write_command(&outblock, FALSE, "STARTTLS\r\n") < 0) | |
1063 | goto SEND_FAILED; | |
1064 | ||
1065 | /* If there is an I/O error, transmission of this message is deferred. If | |
1066 | there is a temporary rejection of STARRTLS and tls_tempfail_tryclear is | |
1067 | false, we also defer. However, if there is a temporary rejection of STARTTLS | |
1068 | and tls_tempfail_tryclear is true, or if there is an outright rejection of | |
1069 | STARTTLS, we carry on. This means we will try to send the message in clear, | |
1070 | unless the host is in hosts_require_tls (tested below). */ | |
1071 | ||
1072 | if (!smtp_read_response(&inblock, buffer2, sizeof(buffer2), '2', | |
1073 | ob->command_timeout)) | |
1074 | { | |
1075 | Ustrncpy(buffer, buffer2, sizeof(buffer)); | |
1076 | if (errno != 0 || buffer2[0] == 0 || | |
1077 | (buffer2[0] == '4' && !ob->tls_tempfail_tryclear)) | |
1078 | goto RESPONSE_FAILED; | |
1079 | } | |
1080 | ||
1081 | /* STARTTLS accepted: try to negotiate a TLS session. */ | |
1082 | ||
1083 | else | |
1084 | { | |
83da1223 PH |
1085 | int rc = tls_client_start(inblock.sock, |
1086 | host, | |
1087 | addrlist, | |
0756eb3c PH |
1088 | NULL, /* No DH param */ |
1089 | ob->tls_certificate, | |
1090 | ob->tls_privatekey, | |
1091 | ob->tls_verify_certificates, | |
1092 | ob->tls_crl, | |
1093 | ob->tls_require_ciphers, | |
83da1223 PH |
1094 | ob->gnutls_require_mac, |
1095 | ob->gnutls_require_kx, | |
1096 | ob->gnutls_require_proto, | |
0756eb3c PH |
1097 | ob->command_timeout); |
1098 | ||
1099 | /* TLS negotiation failed; give an error. From outside, this function may | |
1100 | be called again to try in clear on a new connection, if the options permit | |
1101 | it for this host. */ | |
1102 | ||
1103 | if (rc != OK) | |
1104 | { | |
1105 | save_errno = ERRNO_TLSFAILURE; | |
1106 | message = US"failure while setting up TLS session"; | |
1107 | send_quit = FALSE; | |
1108 | goto TLS_FAILED; | |
1109 | } | |
1110 | ||
1111 | /* TLS session is set up */ | |
1112 | ||
1113 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
1114 | { | |
5ca2a9a1 PH |
1115 | if (addr->transport_return == PENDING_DEFER) |
1116 | { | |
1117 | addr->cipher = tls_cipher; | |
1118 | addr->peerdn = tls_peerdn; | |
1119 | } | |
0756eb3c PH |
1120 | } |
1121 | } | |
1122 | } | |
1123 | ||
41c7c167 PH |
1124 | /* If we started TLS, redo the EHLO/LHLO exchange over the secure channel. If |
1125 | helo_data is null, we are dealing with a connection that was passed from | |
1126 | another process, and so we won't have expanded helo_data above. We have to | |
1127 | expand it here. $sending_ip_address and $sending_port are set up right at the | |
1128 | start of the Exim process (in exim.c). */ | |
0756eb3c PH |
1129 | |
1130 | if (tls_active >= 0) | |
1131 | { | |
41c7c167 PH |
1132 | if (helo_data == NULL) |
1133 | { | |
1134 | helo_data = expand_string(ob->helo_data); | |
1135 | if (helo_data == NULL) | |
1136 | { | |
1137 | uschar *message = string_sprintf("failed to expand helo_data: %s", | |
1138 | expand_string_message); | |
1139 | set_errno(addrlist, 0, message, DEFER, FALSE); | |
1140 | yield = DEFER; | |
1141 | goto SEND_QUIT; | |
1142 | } | |
1143 | } | |
1144 | ||
0756eb3c PH |
1145 | if (smtp_write_command(&outblock, FALSE, "%s %s\r\n", lmtp? "LHLO" : "EHLO", |
1146 | helo_data) < 0) | |
1147 | goto SEND_FAILED; | |
1148 | if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
1149 | ob->command_timeout)) | |
1150 | goto RESPONSE_FAILED; | |
1151 | } | |
1152 | ||
1153 | /* If the host is required to use a secure channel, ensure that we | |
1154 | have one. */ | |
1155 | ||
1156 | else if (verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name, | |
1157 | host->address, NULL) == OK) | |
1158 | { | |
1159 | save_errno = ERRNO_TLSREQUIRED; | |
1160 | message = string_sprintf("a TLS session is required for %s [%s], but %s", | |
1161 | host->name, host->address, | |
1162 | tls_offered? "an attempt to start TLS failed" : | |
1163 | "the server did not offer TLS support"); | |
1164 | goto TLS_FAILED; | |
1165 | } | |
1166 | #endif | |
1167 | ||
1168 | /* If TLS is active, we have just started it up and re-done the EHLO command, | |
1169 | so its response needs to be analyzed. If TLS is not active and this is a | |
1170 | continued session down a previously-used socket, we haven't just done EHLO, so | |
1171 | we skip this. */ | |
1172 | ||
1173 | if (continue_hostname == NULL | |
1174 | #ifdef SUPPORT_TLS | |
1175 | || tls_active >= 0 | |
1176 | #endif | |
1177 | ) | |
1178 | { | |
1179 | int require_auth; | |
1180 | uschar *fail_reason = US"server did not advertise AUTH support"; | |
1181 | ||
f1513293 PH |
1182 | /* Set for IGNOREQUOTA if the response to LHLO specifies support and the |
1183 | lmtp_ignore_quota option was set. */ | |
1184 | ||
1185 | igquotstr = (lmtp && ob->lmtp_ignore_quota && | |
1186 | pcre_exec(regex_IGNOREQUOTA, NULL, CS buffer, Ustrlen(CS buffer), 0, | |
1187 | PCRE_EOPT, NULL, 0) >= 0)? US" IGNOREQUOTA" : US""; | |
1188 | ||
0756eb3c PH |
1189 | /* If the response to EHLO specified support for the SIZE parameter, note |
1190 | this, provided size_addition is non-negative. */ | |
1191 | ||
1192 | smtp_use_size = esmtp && ob->size_addition >= 0 && | |
1193 | pcre_exec(regex_SIZE, NULL, CS buffer, Ustrlen(CS buffer), 0, | |
1194 | PCRE_EOPT, NULL, 0) >= 0; | |
1195 | ||
1196 | /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched | |
c51b8e75 PH |
1197 | the current host, esmtp will be false, so PIPELINING can never be used. If |
1198 | the current host matches hosts_avoid_pipelining, don't do it. */ | |
0756eb3c PH |
1199 | |
1200 | smtp_use_pipelining = esmtp && | |
c51b8e75 PH |
1201 | verify_check_this_host(&(ob->hosts_avoid_pipelining), NULL, host->name, |
1202 | host->address, NULL) != OK && | |
0756eb3c PH |
1203 | pcre_exec(regex_PIPELINING, NULL, CS buffer, Ustrlen(CS buffer), 0, |
1204 | PCRE_EOPT, NULL, 0) >= 0; | |
1205 | ||
1206 | DEBUG(D_transport) debug_printf("%susing PIPELINING\n", | |
1207 | smtp_use_pipelining? "" : "not "); | |
1208 | ||
1209 | /* Note if the response to EHLO specifies support for the AUTH extension. | |
1210 | If it has, check that this host is one we want to authenticate to, and do | |
1211 | the business. The host name and address must be available when the | |
1212 | authenticator's client driver is running. */ | |
1213 | ||
1214 | smtp_authenticated = FALSE; | |
1215 | require_auth = verify_check_this_host(&(ob->hosts_require_auth), NULL, | |
1216 | host->name, host->address, NULL); | |
1217 | ||
1218 | if (esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1)) | |
1219 | { | |
1220 | uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]); | |
1221 | expand_nmax = -1; /* reset */ | |
1222 | ||
1223 | /* Must not do this check until after we have saved the result of the | |
1224 | regex match above. */ | |
1225 | ||
1226 | if (require_auth == OK || | |
1227 | verify_check_this_host(&(ob->hosts_try_auth), NULL, host->name, | |
1228 | host->address, NULL) == OK) | |
1229 | { | |
1230 | auth_instance *au; | |
1231 | fail_reason = US"no common mechanisms were found"; | |
1232 | ||
1233 | DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n"); | |
1234 | ||
1235 | /* Scan the configured authenticators looking for one which is configured | |
1236 | for use as a client and whose name matches an authentication mechanism | |
1237 | supported by the server. If one is found, attempt to authenticate by | |
1238 | calling its client function. */ | |
1239 | ||
1240 | for (au = auths; !smtp_authenticated && au != NULL; au = au->next) | |
1241 | { | |
1242 | uschar *p = names; | |
1243 | if (!au->client) continue; | |
1244 | ||
1245 | /* Loop to scan supported server mechanisms */ | |
1246 | ||
1247 | while (*p != 0) | |
1248 | { | |
1249 | int rc; | |
1250 | int len = Ustrlen(au->public_name); | |
1251 | while (isspace(*p)) p++; | |
1252 | ||
1253 | if (strncmpic(au->public_name, p, len) != 0 || | |
1254 | (p[len] != 0 && !isspace(p[len]))) | |
1255 | { | |
1256 | while (*p != 0 && !isspace(*p)) p++; | |
1257 | continue; | |
1258 | } | |
1259 | ||
1260 | /* Found data for a listed mechanism. Call its client entry. Set | |
1261 | a flag in the outblock so that data is overwritten after sending so | |
1262 | that reflections don't show it. */ | |
1263 | ||
1264 | fail_reason = US"authentication attempt(s) failed"; | |
1265 | outblock.authenticating = TRUE; | |
1266 | rc = (au->info->clientcode)(au, &inblock, &outblock, | |
1267 | ob->command_timeout, buffer, sizeof(buffer)); | |
1268 | outblock.authenticating = FALSE; | |
1269 | DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n", | |
1270 | au->name, rc); | |
1271 | ||
1272 | /* A temporary authentication failure must hold up delivery to | |
1273 | this host. After a permanent authentication failure, we carry on | |
1274 | to try other authentication methods. If all fail hard, try to | |
1275 | deliver the message unauthenticated unless require_auth was set. */ | |
1276 | ||
1277 | switch(rc) | |
1278 | { | |
1279 | case OK: | |
1280 | smtp_authenticated = TRUE; /* stops the outer loop */ | |
1281 | break; | |
1282 | ||
1283 | /* Failure after writing a command */ | |
1284 | ||
1285 | case FAIL_SEND: | |
1286 | goto SEND_FAILED; | |
1287 | ||
1288 | /* Failure after reading a response */ | |
1289 | ||
1290 | case FAIL: | |
1291 | if (errno != 0 || buffer[0] != '5') goto RESPONSE_FAILED; | |
1292 | log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s", | |
1293 | au->name, host->name, host->address, buffer); | |
1294 | break; | |
1295 | ||
1296 | /* Failure by some other means. In effect, the authenticator | |
1297 | decided it wasn't prepared to handle this case. Typically this | |
1298 | is the result of "fail" in an expansion string. Do we need to | |
4730f942 PH |
1299 | log anything here? Feb 2006: a message is now put in the buffer |
1300 | if logging is required. */ | |
0756eb3c PH |
1301 | |
1302 | case CANCELLED: | |
4730f942 PH |
1303 | if (*buffer != 0) |
1304 | log_write(0, LOG_MAIN, "%s authenticator cancelled " | |
1305 | "authentication H=%s [%s] %s", au->name, host->name, | |
1306 | host->address, buffer); | |
0756eb3c PH |
1307 | break; |
1308 | ||
1309 | /* Internal problem, message in buffer. */ | |
1310 | ||
1311 | case ERROR: | |
1312 | yield = ERROR; | |
447d236c | 1313 | set_errno(addrlist, 0, string_copy(buffer), DEFER, FALSE); |
0756eb3c PH |
1314 | goto SEND_QUIT; |
1315 | } | |
1316 | ||
1317 | break; /* If not authenticated, try next authenticator */ | |
1318 | } /* Loop for scanning supported server mechanisms */ | |
1319 | } /* Loop for further authenticators */ | |
1320 | } | |
1321 | } | |
1322 | ||
1323 | /* If we haven't authenticated, but are required to, give up. */ | |
1324 | ||
1325 | if (require_auth == OK && !smtp_authenticated) | |
1326 | { | |
1327 | yield = DEFER; | |
1328 | set_errno(addrlist, ERRNO_AUTHFAIL, | |
447d236c PH |
1329 | string_sprintf("authentication required but %s", fail_reason), DEFER, |
1330 | FALSE); | |
0756eb3c PH |
1331 | goto SEND_QUIT; |
1332 | } | |
1333 | } | |
1334 | ||
1335 | /* The setting up of the SMTP call is now complete. Any subsequent errors are | |
1336 | message-specific. */ | |
1337 | ||
1338 | setting_up = FALSE; | |
1339 | ||
1340 | /* If there is a filter command specified for this transport, we can now | |
1341 | set it up. This cannot be done until the identify of the host is known. */ | |
1342 | ||
1343 | if (tblock->filter_command != NULL) | |
1344 | { | |
1345 | BOOL rc; | |
1346 | uschar buffer[64]; | |
1347 | sprintf(CS buffer, "%.50s transport", tblock->name); | |
1348 | rc = transport_set_up_command(&transport_filter_argv, tblock->filter_command, | |
1349 | TRUE, DEFER, addrlist, buffer, NULL); | |
1350 | ||
1351 | /* On failure, copy the error to all addresses, abandon the SMTP call, and | |
1352 | yield ERROR. */ | |
1353 | ||
1354 | if (!rc) | |
1355 | { | |
447d236c PH |
1356 | set_errno(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER, |
1357 | FALSE); | |
0756eb3c PH |
1358 | yield = ERROR; |
1359 | goto SEND_QUIT; | |
1360 | } | |
1361 | } | |
1362 | ||
1363 | ||
1364 | /* For messages that have more than the maximum number of envelope recipients, | |
1365 | we want to send several transactions down the same SMTP connection. (See | |
1366 | comments in deliver.c as to how this reconciles, heuristically, with | |
1367 | remote_max_parallel.) This optimization was added to Exim after the following | |
1368 | code was already working. The simplest way to put it in without disturbing the | |
1369 | code was to use a goto to jump back to this point when there is another | |
1370 | transaction to handle. */ | |
1371 | ||
1372 | SEND_MESSAGE: | |
1373 | sync_addr = first_addr; | |
1374 | address_count = 0; | |
1375 | ok = FALSE; | |
1376 | send_rset = TRUE; | |
1377 | completed_address = FALSE; | |
1378 | ||
1379 | ||
1380 | /* Initiate a message transfer. If we know the receiving MTA supports the SIZE | |
1381 | qualification, send it, adding something to the message size to allow for | |
1382 | imprecision and things that get added en route. Exim keeps the number of lines | |
1383 | in a message, so we can give an accurate value for the original message, but we | |
1384 | need some additional to handle added headers. (Double "." characters don't get | |
1385 | included in the count.) */ | |
1386 | ||
1387 | p = buffer; | |
1388 | *p = 0; | |
1389 | ||
1390 | if (smtp_use_size) | |
1391 | { | |
1392 | sprintf(CS p, " SIZE=%d", message_size+message_linecount+ob->size_addition); | |
1393 | while (*p) p++; | |
1394 | } | |
1395 | ||
1396 | /* Add the authenticated sender address if present */ | |
1397 | ||
382afc6b PH |
1398 | if ((smtp_authenticated || ob->authenticated_sender_force) && |
1399 | local_authenticated_sender != NULL) | |
0756eb3c PH |
1400 | { |
1401 | string_format(p, sizeof(buffer) - (p-buffer), " AUTH=%s", | |
1402 | auth_xtextencode(local_authenticated_sender, | |
1403 | Ustrlen(local_authenticated_sender))); | |
1404 | } | |
1405 | ||
1406 | /* From here until we send the DATA command, we can make use of PIPELINING | |
1407 | if the server host supports it. The code has to be able to check the responses | |
1408 | at any point, for when the buffer fills up, so we write it totally generally. | |
1409 | When PIPELINING is off, each command written reports that it has flushed the | |
1410 | buffer. */ | |
1411 | ||
1412 | pending_MAIL = TRUE; /* The block starts with MAIL */ | |
1413 | ||
1414 | rc = smtp_write_command(&outblock, smtp_use_pipelining, | |
1415 | "MAIL FROM:<%s>%s\r\n", return_path, buffer); | |
1416 | mail_command = string_copy(big_buffer); /* Save for later error message */ | |
1417 | ||
1418 | switch(rc) | |
1419 | { | |
1420 | case -1: /* Transmission error */ | |
1421 | goto SEND_FAILED; | |
1422 | ||
1423 | case +1: /* Block was sent */ | |
1424 | if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
e97957bc PH |
1425 | ob->command_timeout)) |
1426 | { | |
1427 | if (errno == 0 && buffer[0] == '4') | |
1428 | { | |
1429 | errno = ERRNO_MAIL4XX; | |
1430 | addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8; | |
1431 | } | |
1432 | goto RESPONSE_FAILED; | |
1433 | } | |
0756eb3c PH |
1434 | pending_MAIL = FALSE; |
1435 | break; | |
1436 | } | |
1437 | ||
1438 | /* Pass over all the relevant recipient addresses for this host, which are the | |
1439 | ones that have status PENDING_DEFER. If we are using PIPELINING, we can send | |
1440 | several before we have to read the responses for those seen so far. This | |
1441 | checking is done by a subroutine because it also needs to be done at the end. | |
1442 | Send only up to max_rcpt addresses at a time, leaving first_addr pointing to | |
1443 | the next one if not all are sent. | |
1444 | ||
1445 | In the MUA wrapper situation, we want to flush the PIPELINING buffer for the | |
1446 | last address because we want to abort if any recipients have any kind of | |
1447 | problem, temporary or permanent. We know that all recipient addresses will have | |
1448 | the PENDING_DEFER status, because only one attempt is ever made, and we know | |
1449 | that max_rcpt will be large, so all addresses will be done at once. */ | |
1450 | ||
1451 | for (addr = first_addr; | |
1452 | address_count < max_rcpt && addr != NULL; | |
1453 | addr = addr->next) | |
1454 | { | |
1455 | int count; | |
1456 | BOOL no_flush; | |
1457 | ||
1458 | if (addr->transport_return != PENDING_DEFER) continue; | |
1459 | ||
1460 | address_count++; | |
1461 | no_flush = smtp_use_pipelining && (!mua_wrapper || addr->next != NULL); | |
1462 | ||
1463 | /* Now send the RCPT command, and process outstanding responses when | |
1464 | necessary. After a timeout on RCPT, we just end the function, leaving the | |
1465 | yield as OK, because this error can often mean that there is a problem with | |
1466 | just one address, so we don't want to delay the host. */ | |
1467 | ||
f1513293 PH |
1468 | count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>%s\r\n", |
1469 | transport_rcpt_address(addr, tblock->rcpt_include_affixes), igquotstr); | |
0756eb3c PH |
1470 | if (count < 0) goto SEND_FAILED; |
1471 | if (count > 0) | |
1472 | { | |
1473 | switch(sync_responses(first_addr, tblock->rcpt_include_affixes, | |
48c7f9e2 PH |
1474 | &sync_addr, host, count, ob->address_retry_include_sender, |
1475 | pending_MAIL, 0, &inblock, ob->command_timeout, buffer, | |
1476 | sizeof(buffer))) | |
0756eb3c PH |
1477 | { |
1478 | case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */ | |
1479 | case 2: completed_address = TRUE; /* 5xx (only) => progress made */ | |
1480 | break; | |
1481 | ||
1482 | case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ | |
1483 | if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */ | |
1484 | case 0: /* No 2xx or 5xx, but no probs */ | |
1485 | break; | |
1486 | ||
1487 | case -1: goto END_OFF; /* Timeout on RCPT */ | |
1488 | default: goto RESPONSE_FAILED; /* I/O error, or any MAIL error */ | |
1489 | } | |
1490 | pending_MAIL = FALSE; /* Dealt with MAIL */ | |
1491 | } | |
1492 | } /* Loop for next address */ | |
1493 | ||
1494 | /* If we are an MUA wrapper, abort if any RCPTs were rejected, either | |
1495 | permanently or temporarily. We should have flushed and synced after the last | |
1496 | RCPT. */ | |
1497 | ||
1498 | if (mua_wrapper) | |
1499 | { | |
1500 | address_item *badaddr; | |
1501 | for (badaddr = first_addr; badaddr != NULL; badaddr = badaddr->next) | |
1502 | { | |
1503 | if (badaddr->transport_return != PENDING_OK) break; | |
1504 | } | |
1505 | if (badaddr != NULL) | |
1506 | { | |
447d236c PH |
1507 | set_errno(addrlist, 0, badaddr->message, FAIL, |
1508 | testflag(badaddr, af_pass_message)); | |
0756eb3c PH |
1509 | ok = FALSE; |
1510 | } | |
1511 | } | |
1512 | ||
1513 | /* If ok is TRUE, we know we have got at least one good recipient, and must now | |
1514 | send DATA, but if it is FALSE (in the normal, non-wrapper case), we may still | |
1515 | have a good recipient buffered up if we are pipelining. We don't want to waste | |
1516 | time sending DATA needlessly, so we only send it if either ok is TRUE or if we | |
1517 | are pipelining. The responses are all handled by sync_responses(). */ | |
1518 | ||
1519 | if (ok || (smtp_use_pipelining && !mua_wrapper)) | |
1520 | { | |
1521 | int count = smtp_write_command(&outblock, FALSE, "DATA\r\n"); | |
1522 | if (count < 0) goto SEND_FAILED; | |
1523 | switch(sync_responses(first_addr, tblock->rcpt_include_affixes, &sync_addr, | |
48c7f9e2 PH |
1524 | host, count, ob->address_retry_include_sender, pending_MAIL, |
1525 | ok? +1 : -1, &inblock, ob->command_timeout, buffer, sizeof(buffer))) | |
0756eb3c PH |
1526 | { |
1527 | case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */ | |
1528 | case 2: completed_address = TRUE; /* 5xx (only) => progress made */ | |
1529 | break; | |
1530 | ||
1531 | case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ | |
1532 | if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */ | |
1533 | case 0: break; /* No 2xx or 5xx, but no probs */ | |
1534 | ||
1535 | case -1: goto END_OFF; /* Timeout on RCPT */ | |
1536 | default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */ | |
1537 | } | |
1538 | } | |
1539 | ||
1540 | /* Save the first address of the next batch. */ | |
1541 | ||
1542 | first_addr = addr; | |
1543 | ||
1544 | /* If there were no good recipients (but otherwise there have been no | |
1545 | problems), just set ok TRUE, since we have handled address-specific errors | |
1546 | already. Otherwise, it's OK to send the message. Use the check/escape mechanism | |
1547 | for handling the SMTP dot-handling protocol, flagging to apply to headers as | |
1548 | well as body. Set the appropriate timeout value to be used for each chunk. | |
1549 | (Haven't been able to make it work using select() for writing yet.) */ | |
1550 | ||
1551 | if (!ok) ok = TRUE; else | |
1552 | { | |
1553 | sigalrm_seen = FALSE; | |
1554 | transport_write_timeout = ob->data_timeout; | |
1555 | smtp_command = US"sending data block"; /* For error messages */ | |
1556 | DEBUG(D_transport|D_v) | |
1557 | debug_printf(" SMTP>> writing message and terminating \".\"\n"); | |
1558 | transport_count = 0; | |
fb2274d4 TK |
1559 | #ifdef EXPERIMENTAL_DOMAINKEYS |
1560 | if ( (ob->dk_private_key != NULL) && (ob->dk_selector != NULL) ) | |
1561 | ok = dk_transport_write_message(addrlist, inblock.sock, | |
1562 | topt_use_crlf | topt_end_dot | topt_escape_headers | | |
1563 | (tblock->body_only? topt_no_headers : 0) | | |
1564 | (tblock->headers_only? topt_no_body : 0) | | |
1565 | (tblock->return_path_add? topt_add_return_path : 0) | | |
1566 | (tblock->delivery_date_add? topt_add_delivery_date : 0) | | |
1567 | (tblock->envelope_to_add? topt_add_envelope_to : 0), | |
1568 | 0, /* No size limit */ | |
1569 | tblock->add_headers, tblock->remove_headers, | |
1570 | US".", US"..", /* Escaping strings */ | |
1571 | tblock->rewrite_rules, tblock->rewrite_existflags, | |
1572 | ob->dk_private_key, ob->dk_domain, ob->dk_selector, | |
1573 | ob->dk_canon, ob->dk_headers, ob->dk_strict); | |
1574 | else | |
1575 | #endif | |
0756eb3c PH |
1576 | ok = transport_write_message(addrlist, inblock.sock, |
1577 | topt_use_crlf | topt_end_dot | topt_escape_headers | | |
1578 | (tblock->body_only? topt_no_headers : 0) | | |
1579 | (tblock->headers_only? topt_no_body : 0) | | |
1580 | (tblock->return_path_add? topt_add_return_path : 0) | | |
1581 | (tblock->delivery_date_add? topt_add_delivery_date : 0) | | |
1582 | (tblock->envelope_to_add? topt_add_envelope_to : 0), | |
1583 | 0, /* No size limit */ | |
1584 | tblock->add_headers, tblock->remove_headers, | |
1585 | US".", US"..", /* Escaping strings */ | |
1586 | tblock->rewrite_rules, tblock->rewrite_existflags); | |
1587 | ||
1588 | /* transport_write_message() uses write() because it is called from other | |
1589 | places to write to non-sockets. This means that under some OS (e.g. Solaris) | |
1590 | it can exit with "Broken pipe" as its error. This really means that the | |
1591 | socket got closed at the far end. */ | |
1592 | ||
1593 | transport_write_timeout = 0; /* for subsequent transports */ | |
1594 | ||
1595 | /* Failure can either be some kind of I/O disaster (including timeout), | |
1596 | or the failure of a transport filter or the expansion of added headers. */ | |
1597 | ||
1598 | if (!ok) | |
1599 | { | |
1600 | buffer[0] = 0; /* There hasn't been a response */ | |
1601 | goto RESPONSE_FAILED; | |
1602 | } | |
1603 | ||
1604 | /* We used to send the terminating "." explicitly here, but because of | |
1605 | buffering effects at both ends of TCP/IP connections, you don't gain | |
1606 | anything by keeping it separate, so it might as well go in the final | |
1607 | data buffer for efficiency. This is now done by setting the topt_end_dot | |
1608 | flag above. */ | |
1609 | ||
1610 | smtp_command = US"end of data"; | |
1611 | ||
1612 | /* For SMTP, we now read a single response that applies to the whole message. | |
1613 | If it is OK, then all the addresses have been delivered. */ | |
1614 | ||
e97957bc PH |
1615 | if (!lmtp) |
1616 | { | |
1617 | ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
1618 | ob->final_timeout); | |
1619 | if (!ok && errno == 0 && buffer[0] == '4') | |
1620 | { | |
1621 | errno = ERRNO_DATA4XX; | |
1622 | addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8; | |
1623 | } | |
1624 | } | |
0756eb3c PH |
1625 | |
1626 | /* For LMTP, we get back a response for every RCPT command that we sent; | |
1627 | some may be accepted and some rejected. For those that get a response, their | |
1628 | status is fixed; any that are accepted have been handed over, even if later | |
1629 | responses crash - at least, that's how I read RFC 2033. | |
1630 | ||
1631 | If all went well, mark the recipient addresses as completed, record which | |
1632 | host/IPaddress they were delivered to, and cut out RSET when sending another | |
1633 | message down the same channel. Write the completed addresses to the journal | |
1634 | now so that they are recorded in case there is a crash of hardware or | |
1635 | software before the spool gets updated. Also record the final SMTP | |
1636 | confirmation if needed (for SMTP only). */ | |
1637 | ||
1638 | if (ok) | |
1639 | { | |
1640 | int flag = '='; | |
1641 | int delivery_time = (int)(time(NULL) - start_delivery_time); | |
1642 | int len; | |
1643 | host_item *thost; | |
1644 | uschar *conf = NULL; | |
1645 | send_rset = FALSE; | |
1646 | ||
1647 | /* Make a copy of the host if it is local to this invocation | |
1648 | of the transport. */ | |
1649 | ||
1650 | if (copy_host) | |
1651 | { | |
1652 | thost = store_get(sizeof(host_item)); | |
1653 | *thost = *host; | |
1654 | thost->name = string_copy(host->name); | |
1655 | thost->address = string_copy(host->address); | |
1656 | } | |
1657 | else thost = host; | |
1658 | ||
1659 | /* Set up confirmation if needed - applies only to SMTP */ | |
1660 | ||
1661 | if ((log_extra_selector & LX_smtp_confirmation) != 0 && !lmtp) | |
1662 | { | |
1663 | uschar *s = string_printing(buffer); | |
1664 | conf = (s == buffer)? (uschar *)string_copy(s) : s; | |
1665 | } | |
1666 | ||
1667 | /* Process all transported addresses - for LMTP, read a status for | |
1668 | each one. */ | |
1669 | ||
1670 | for (addr = addrlist; addr != first_addr; addr = addr->next) | |
1671 | { | |
1672 | if (addr->transport_return != PENDING_OK) continue; | |
1673 | ||
1674 | /* LMTP - if the response fails badly (e.g. timeout), use it for all the | |
1675 | remaining addresses. Otherwise, it's a return code for just the one | |
75def545 PH |
1676 | address. For temporary errors, add a retry item for the address so that |
1677 | it doesn't get tried again too soon. */ | |
0756eb3c PH |
1678 | |
1679 | if (lmtp) | |
1680 | { | |
1681 | if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
1682 | ob->final_timeout)) | |
1683 | { | |
1684 | if (errno != 0 || buffer[0] == 0) goto RESPONSE_FAILED; | |
1685 | addr->message = string_sprintf("LMTP error after %s: %s", | |
1686 | big_buffer, string_printing(buffer)); | |
75def545 PH |
1687 | setflag(addr, af_pass_message); /* Allow message to go to user */ |
1688 | if (buffer[0] == '5') | |
1689 | addr->transport_return = FAIL; | |
1690 | else | |
1691 | { | |
e97957bc PH |
1692 | errno = ERRNO_DATA4XX; |
1693 | addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8; | |
75def545 PH |
1694 | addr->transport_return = DEFER; |
1695 | retry_add_item(addr, addr->address_retry_key, 0); | |
1696 | } | |
0756eb3c PH |
1697 | continue; |
1698 | } | |
1699 | completed_address = TRUE; /* NOW we can set this flag */ | |
1700 | } | |
1701 | ||
1702 | /* SMTP, or success return from LMTP for this address. Pass back the | |
2d280592 | 1703 | actual host that was used. */ |
0756eb3c PH |
1704 | |
1705 | addr->transport_return = OK; | |
1706 | addr->more_errno = delivery_time; | |
0756eb3c PH |
1707 | addr->host_used = thost; |
1708 | addr->special_action = flag; | |
1709 | addr->message = conf; | |
1710 | flag = '-'; | |
1711 | ||
1712 | /* Update the journal. For homonymic addresses, use the base address plus | |
1713 | the transport name. See lots of comments in deliver.c about the reasons | |
1714 | for the complications when homonyms are involved. Just carry on after | |
1715 | write error, as it may prove possible to update the spool file later. */ | |
1716 | ||
1717 | if (testflag(addr, af_homonym)) | |
1718 | sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); | |
1719 | else | |
1720 | sprintf(CS buffer, "%.500s\n", addr->unique); | |
1721 | ||
1722 | DEBUG(D_deliver) debug_printf("journalling %s", buffer); | |
1723 | len = Ustrlen(CS buffer); | |
1724 | if (write(journal_fd, buffer, len) != len) | |
1725 | log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for " | |
1726 | "%s: %s", buffer, strerror(errno)); | |
1727 | } | |
1728 | ||
1729 | /* Ensure the journal file is pushed out to disk. */ | |
1730 | ||
54fc8428 | 1731 | if (EXIMfsync(journal_fd) < 0) |
0756eb3c PH |
1732 | log_write(0, LOG_MAIN|LOG_PANIC, "failed to fsync journal: %s", |
1733 | strerror(errno)); | |
1734 | } | |
1735 | } | |
1736 | ||
1737 | ||
1738 | /* Handle general (not specific to one address) failures here. The value of ok | |
1739 | is used to skip over this code on the falling through case. A timeout causes a | |
1740 | deferral. Other errors may defer or fail according to the response code, and | |
1741 | may set up a special errno value, e.g. after connection chopped, which is | |
1742 | assumed if errno == 0 and there is no text in the buffer. If control reaches | |
1743 | here during the setting up phase (i.e. before MAIL FROM) then always defer, as | |
1744 | the problem is not related to this specific message. */ | |
1745 | ||
1746 | if (!ok) | |
1747 | { | |
1748 | int code; | |
1749 | ||
1750 | RESPONSE_FAILED: | |
1751 | save_errno = errno; | |
1752 | message = NULL; | |
1753 | send_quit = check_response(host, &save_errno, addrlist->more_errno, | |
447d236c | 1754 | buffer, &code, &message, &pass_message); |
0756eb3c PH |
1755 | goto FAILED; |
1756 | ||
1757 | SEND_FAILED: | |
1758 | save_errno = errno; | |
1759 | code = '4'; | |
1760 | message = US string_sprintf("send() to %s [%s] failed: %s", | |
1761 | host->name, host->address, strerror(save_errno)); | |
1762 | send_quit = FALSE; | |
1763 | goto FAILED; | |
1764 | ||
1765 | /* This label is jumped to directly when a TLS negotiation has failed, | |
1766 | or was not done for a host for which it is required. Values will be set | |
1767 | in message and save_errno, and setting_up will always be true. Treat as | |
1768 | a temporary error. */ | |
1769 | ||
1770 | #ifdef SUPPORT_TLS | |
1771 | TLS_FAILED: | |
1772 | code = '4'; | |
1773 | #endif | |
1774 | ||
1775 | /* If the failure happened while setting up the call, see if the failure was | |
1776 | a 5xx response (this will either be on connection, or following HELO - a 5xx | |
1777 | after EHLO causes it to try HELO). If so, fail all addresses, as this host is | |
1778 | never going to accept them. For other errors during setting up (timeouts or | |
1779 | whatever), defer all addresses, and yield DEFER, so that the host is not | |
1780 | tried again for a while. */ | |
1781 | ||
1782 | FAILED: | |
1783 | ok = FALSE; /* For when reached by GOTO */ | |
1784 | ||
1785 | if (setting_up) | |
1786 | { | |
1787 | if (code == '5') | |
1788 | { | |
447d236c | 1789 | set_errno(addrlist, save_errno, message, FAIL, pass_message); |
0756eb3c PH |
1790 | } |
1791 | else | |
1792 | { | |
447d236c | 1793 | set_errno(addrlist, save_errno, message, DEFER, pass_message); |
0756eb3c PH |
1794 | yield = DEFER; |
1795 | } | |
1796 | } | |
1797 | ||
e97957bc | 1798 | /* We want to handle timeouts after MAIL or "." and loss of connection after |
0756eb3c | 1799 | "." specially. They can indicate a problem with the sender address or with |
e97957bc PH |
1800 | the contents of the message rather than a real error on the connection. These |
1801 | cases are treated in the same way as a 4xx response. This next bit of code | |
1802 | does the classification. */ | |
0756eb3c | 1803 | |
e97957bc | 1804 | else |
0756eb3c | 1805 | { |
e97957bc | 1806 | BOOL message_error; |
0756eb3c | 1807 | |
e97957bc PH |
1808 | switch(save_errno) |
1809 | { | |
1810 | case 0: | |
1811 | case ERRNO_MAIL4XX: | |
1812 | case ERRNO_DATA4XX: | |
1813 | message_error = TRUE; | |
1814 | break; | |
0756eb3c | 1815 | |
e97957bc PH |
1816 | case ETIMEDOUT: |
1817 | message_error = Ustrncmp(smtp_command,"MAIL",4) == 0 || | |
1818 | Ustrncmp(smtp_command,"end ",4) == 0; | |
1819 | break; | |
1820 | ||
1821 | case ERRNO_SMTPCLOSED: | |
1822 | message_error = Ustrncmp(smtp_command,"end ",4) == 0; | |
1823 | break; | |
1824 | ||
1825 | default: | |
1826 | message_error = FALSE; | |
1827 | break; | |
1828 | } | |
0756eb3c | 1829 | |
e97957bc | 1830 | /* Handle the cases that are treated as message errors. These are: |
0756eb3c | 1831 | |
e97957bc PH |
1832 | (a) negative response or timeout after MAIL |
1833 | (b) negative response after DATA | |
1834 | (c) negative response or timeout or dropped connection after "." | |
0756eb3c | 1835 | |
e97957bc PH |
1836 | It won't be a negative response or timeout after RCPT, as that is dealt |
1837 | with separately above. The action in all cases is to set an appropriate | |
1838 | error code for all the addresses, but to leave yield set to OK because the | |
1839 | host itself has not failed. Of course, it might in practice have failed | |
1840 | when we've had a timeout, but if so, we'll discover that at the next | |
1841 | delivery attempt. For a temporary error, set the message_defer flag, and | |
1842 | write to the logs for information if this is not the last host. The error | |
1843 | for the last host will be logged as part of the address's log line. */ | |
1844 | ||
1845 | if (message_error) | |
0756eb3c | 1846 | { |
e97957bc PH |
1847 | if (mua_wrapper) code = '5'; /* Force hard failure in wrapper mode */ |
1848 | set_errno(addrlist, save_errno, message, (code == '5')? FAIL : DEFER, | |
1849 | pass_message); | |
1850 | ||
1851 | /* If there's an errno, the message contains just the identity of | |
1852 | the host. */ | |
1853 | ||
1854 | if (code != '5') /* Anything other than 5 is treated as temporary */ | |
1855 | { | |
1856 | if (save_errno > 0) | |
1857 | message = US string_sprintf("%s: %s", message, strerror(save_errno)); | |
1858 | if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message); | |
1859 | deliver_msglog("%s %s\n", tod_stamp(tod_log), message); | |
1860 | *message_defer = TRUE; | |
1861 | } | |
1862 | } | |
1863 | ||
1864 | /* Otherwise, we have an I/O error or a timeout other than after MAIL or | |
1865 | ".", or some other transportation error. We defer all addresses and yield | |
1866 | DEFER, except for the case of failed add_headers expansion, or a transport | |
1867 | filter failure, when the yield should be ERROR, to stop it trying other | |
1868 | hosts. */ | |
1869 | ||
1870 | else | |
1871 | { | |
1872 | yield = (save_errno == ERRNO_CHHEADER_FAIL || | |
1873 | save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER; | |
1874 | set_errno(addrlist, save_errno, message, DEFER, pass_message); | |
0756eb3c PH |
1875 | } |
1876 | } | |
1877 | } | |
1878 | ||
1879 | ||
1880 | /* If all has gone well, send_quit will be set TRUE, implying we can end the | |
1881 | SMTP session tidily. However, if there were too many addresses to send in one | |
1882 | message (indicated by first_addr being non-NULL) we want to carry on with the | |
1883 | rest of them. Also, it is desirable to send more than one message down the SMTP | |
1884 | connection if there are several waiting, provided we haven't already sent so | |
1885 | many as to hit the configured limit. The function transport_check_waiting looks | |
1886 | for a waiting message and returns its id. Then transport_pass_socket tries to | |
1887 | set up a continued delivery by passing the socket on to another process. The | |
1888 | variable send_rset is FALSE if a message has just been successfully transfered. | |
1889 | ||
1890 | If we are already sending down a continued channel, there may be further | |
1891 | addresses not yet delivered that are aimed at the same host, but which have not | |
1892 | been passed in this run of the transport. In this case, continue_more will be | |
1893 | true, and all we should do is send RSET if necessary, and return, leaving the | |
1894 | channel open. | |
1895 | ||
1896 | However, if no address was disposed of, i.e. all addresses got 4xx errors, we | |
1897 | do not want to continue with other messages down the same channel, because that | |
1898 | can lead to looping between two or more messages, all with the same, | |
1899 | temporarily failing address(es). [The retry information isn't updated yet, so | |
1900 | new processes keep on trying.] We probably also don't want to try more of this | |
1901 | message's addresses either. | |
1902 | ||
1903 | If we have started a TLS session, we have to end it before passing the | |
1904 | connection to a new process. However, not all servers can handle this (Exim | |
1905 | can), so we do not pass such a connection on if the host matches | |
1906 | hosts_nopass_tls. */ | |
1907 | ||
1908 | DEBUG(D_transport) | |
1909 | debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d " | |
1910 | "yield=%d first_address is %sNULL\n", ok, send_quit, send_rset, | |
1911 | continue_more, yield, (first_addr == NULL)? "":"not "); | |
1912 | ||
1913 | if (completed_address && ok && send_quit) | |
1914 | { | |
1915 | BOOL more; | |
1916 | if (first_addr != NULL || continue_more || | |
1917 | ( | |
1918 | (tls_active < 0 || | |
1919 | verify_check_this_host(&(ob->hosts_nopass_tls), NULL, host->name, | |
1920 | host->address, NULL) != OK) | |
1921 | && | |
1922 | transport_check_waiting(tblock->name, host->name, | |
1923 | tblock->connection_max_messages, new_message_id, &more) | |
1924 | )) | |
1925 | { | |
1926 | uschar *msg; | |
447d236c | 1927 | BOOL pass_message; |
0756eb3c PH |
1928 | |
1929 | if (send_rset) | |
1930 | { | |
1931 | if (! (ok = smtp_write_command(&outblock, FALSE, "RSET\r\n") >= 0)) | |
1932 | { | |
1933 | msg = US string_sprintf("send() to %s [%s] failed: %s", host->name, | |
1934 | host->address, strerror(save_errno)); | |
1935 | send_quit = FALSE; | |
1936 | } | |
1937 | else if (! (ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
1938 | ob->command_timeout))) | |
1939 | { | |
1940 | int code; | |
447d236c PH |
1941 | send_quit = check_response(host, &errno, 0, buffer, &code, &msg, |
1942 | &pass_message); | |
0756eb3c PH |
1943 | if (!send_quit) |
1944 | { | |
1945 | DEBUG(D_transport) debug_printf("%s\n", msg); | |
1946 | } | |
1947 | } | |
1948 | } | |
1949 | ||
1950 | /* Either RSET was not needed, or it succeeded */ | |
1951 | ||
1952 | if (ok) | |
1953 | { | |
1954 | if (first_addr != NULL) /* More addresses still to be sent */ | |
1955 | { /* in this run of the transport */ | |
1956 | continue_sequence++; /* Causes * in logging */ | |
1957 | goto SEND_MESSAGE; | |
1958 | } | |
1959 | if (continue_more) return yield; /* More addresses for another run */ | |
1960 | ||
1961 | /* Pass the socket to a new Exim process. Before doing so, we must shut | |
1962 | down TLS. Not all MTAs allow for the continuation of the SMTP session | |
1963 | when TLS is shut down. We test for this by sending a new EHLO. If we | |
1964 | don't get a good response, we don't attempt to pass the socket on. */ | |
1965 | ||
1966 | #ifdef SUPPORT_TLS | |
1967 | if (tls_active >= 0) | |
1968 | { | |
1969 | tls_close(TRUE); | |
1970 | ok = smtp_write_command(&outblock,FALSE,"EHLO %s\r\n",helo_data) >= 0 && | |
1971 | smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
1972 | ob->command_timeout); | |
1973 | } | |
1974 | #endif | |
1975 | ||
1976 | /* If the socket is successfully passed, we musn't send QUIT (or | |
1977 | indeed anything!) from here. */ | |
1978 | ||
1979 | if (ok && transport_pass_socket(tblock->name, host->name, host->address, | |
1980 | new_message_id, inblock.sock)) | |
1981 | { | |
1982 | send_quit = FALSE; | |
1983 | } | |
1984 | } | |
1985 | ||
1986 | /* If RSET failed and there are addresses left, they get deferred. */ | |
1987 | ||
447d236c | 1988 | else set_errno(first_addr, errno, msg, DEFER, FALSE); |
0756eb3c PH |
1989 | } |
1990 | } | |
1991 | ||
1992 | /* End off tidily with QUIT unless the connection has died or the socket has | |
1993 | been passed to another process. There has been discussion on the net about what | |
1994 | to do after sending QUIT. The wording of the RFC suggests that it is necessary | |
1995 | to wait for a response, but on the other hand, there isn't anything one can do | |
1996 | with an error response, other than log it. Exim used to do that. However, | |
1997 | further discussion suggested that it is positively advantageous not to wait for | |
1998 | the response, but to close the session immediately. This is supposed to move | |
1999 | the TCP/IP TIME_WAIT state from the server to the client, thereby removing some | |
2000 | load from the server. (Hosts that are both servers and clients may not see much | |
2001 | difference, of course.) Further discussion indicated that this was safe to do | |
2002 | on Unix systems which have decent implementations of TCP/IP that leave the | |
2003 | connection around for a while (TIME_WAIT) after the application has gone away. | |
2004 | This enables the response sent by the server to be properly ACKed rather than | |
2005 | timed out, as can happen on broken TCP/IP implementations on other OS. | |
2006 | ||
2007 | This change is being made on 31-Jul-98. After over a year of trouble-free | |
2008 | operation, the old commented-out code was removed on 17-Sep-99. */ | |
2009 | ||
2010 | SEND_QUIT: | |
2011 | if (send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n"); | |
2012 | ||
2013 | END_OFF: | |
2014 | ||
2015 | #ifdef SUPPORT_TLS | |
2016 | tls_close(TRUE); | |
2017 | #endif | |
2018 | ||
2019 | /* Close the socket, and return the appropriate value, first setting | |
2020 | continue_transport and continue_hostname NULL to prevent any other addresses | |
2021 | that may include the host from trying to re-use a continuation socket. This | |
2022 | works because the NULL setting is passed back to the calling process, and | |
2023 | remote_max_parallel is forced to 1 when delivering over an existing connection, | |
2024 | ||
2025 | If all went well and continue_more is set, we shouldn't actually get here if | |
2026 | there are further addresses, as the return above will be taken. However, | |
2027 | writing RSET might have failed, or there may be other addresses whose hosts are | |
2028 | specified in the transports, and therefore not visible at top level, in which | |
2029 | case continue_more won't get set. */ | |
2030 | ||
f1e894f3 | 2031 | (void)close(inblock.sock); |
0756eb3c PH |
2032 | continue_transport = NULL; |
2033 | continue_hostname = NULL; | |
2034 | return yield; | |
2035 | } | |
2036 | ||
2037 | ||
2038 | ||
2039 | ||
2040 | /************************************************* | |
2041 | * Closedown entry point * | |
2042 | *************************************************/ | |
2043 | ||
2044 | /* This function is called when exim is passed an open smtp channel | |
2045 | from another incarnation, but the message which it has been asked | |
2046 | to deliver no longer exists. The channel is on stdin. | |
2047 | ||
2048 | We might do fancy things like looking for another message to send down | |
2049 | the channel, but if the one we sought has gone, it has probably been | |
2050 | delivered by some other process that itself will seek further messages, | |
2051 | so just close down our connection. | |
2052 | ||
2053 | Argument: pointer to the transport instance block | |
2054 | Returns: nothing | |
2055 | */ | |
2056 | ||
2057 | void | |
2058 | smtp_transport_closedown(transport_instance *tblock) | |
2059 | { | |
2060 | smtp_transport_options_block *ob = | |
2061 | (smtp_transport_options_block *)(tblock->options_block); | |
2062 | smtp_inblock inblock; | |
2063 | smtp_outblock outblock; | |
2064 | uschar buffer[256]; | |
2065 | uschar inbuffer[4096]; | |
2066 | uschar outbuffer[16]; | |
2067 | ||
2068 | inblock.sock = fileno(stdin); | |
2069 | inblock.buffer = inbuffer; | |
2070 | inblock.buffersize = sizeof(inbuffer); | |
2071 | inblock.ptr = inbuffer; | |
2072 | inblock.ptrend = inbuffer; | |
2073 | ||
2074 | outblock.sock = inblock.sock; | |
2075 | outblock.buffersize = sizeof(outbuffer); | |
2076 | outblock.buffer = outbuffer; | |
2077 | outblock.ptr = outbuffer; | |
2078 | outblock.cmd_count = 0; | |
2079 | outblock.authenticating = FALSE; | |
2080 | ||
2081 | (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n"); | |
2082 | (void)smtp_read_response(&inblock, buffer, sizeof(buffer), '2', | |
2083 | ob->command_timeout); | |
f1e894f3 | 2084 | (void)close(inblock.sock); |
0756eb3c PH |
2085 | } |
2086 | ||
2087 | ||
2088 | ||
2089 | /************************************************* | |
2090 | * Prepare addresses for delivery * | |
2091 | *************************************************/ | |
2092 | ||
2093 | /* This function is called to flush out error settings from previous delivery | |
2094 | attempts to other hosts. It also records whether we got here via an MX record | |
2095 | or not in the more_errno field of the address. We are interested only in | |
2096 | addresses that are still marked DEFER - others may have got delivered to a | |
2097 | previously considered IP address. Set their status to PENDING_DEFER to indicate | |
2098 | which ones are relevant this time. | |
2099 | ||
2100 | Arguments: | |
2101 | addrlist the list of addresses | |
2102 | host the host we are delivering to | |
2103 | ||
2104 | Returns: the first address for this delivery | |
2105 | */ | |
2106 | ||
2107 | static address_item * | |
2108 | prepare_addresses(address_item *addrlist, host_item *host) | |
2109 | { | |
2110 | address_item *first_addr = NULL; | |
2111 | address_item *addr; | |
2112 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2113 | { | |
2114 | if (addr->transport_return != DEFER) continue; | |
2115 | if (first_addr == NULL) first_addr = addr; | |
2116 | addr->transport_return = PENDING_DEFER; | |
2117 | addr->basic_errno = 0; | |
2118 | addr->more_errno = (host->mx >= 0)? 'M' : 'A'; | |
2119 | addr->message = NULL; | |
2120 | #ifdef SUPPORT_TLS | |
2121 | addr->cipher = NULL; | |
2122 | addr->peerdn = NULL; | |
2123 | #endif | |
2124 | } | |
2125 | return first_addr; | |
2126 | } | |
2127 | ||
2128 | ||
2129 | ||
2130 | /************************************************* | |
2131 | * Main entry point * | |
2132 | *************************************************/ | |
2133 | ||
2134 | /* See local README for interface details. As this is a remote transport, it is | |
2135 | given a chain of addresses to be delivered in one connection, if possible. It | |
2136 | always returns TRUE, indicating that each address has its own independent | |
2137 | status set, except if there is a setting up problem, in which case it returns | |
2138 | FALSE. */ | |
2139 | ||
2140 | BOOL | |
2141 | smtp_transport_entry( | |
2142 | transport_instance *tblock, /* data for this instantiation */ | |
2143 | address_item *addrlist) /* addresses we are working on */ | |
2144 | { | |
2145 | int cutoff_retry; | |
2146 | int port; | |
2147 | int hosts_defer = 0; | |
2148 | int hosts_fail = 0; | |
2149 | int hosts_looked_up = 0; | |
2150 | int hosts_retry = 0; | |
2151 | int hosts_serial = 0; | |
2152 | int hosts_total = 0; | |
8e669ac1 | 2153 | int total_hosts_tried = 0; |
0756eb3c PH |
2154 | address_item *addr; |
2155 | BOOL expired = TRUE; | |
2156 | BOOL continuing = continue_hostname != NULL; | |
2157 | uschar *expanded_hosts = NULL; | |
2158 | uschar *pistring; | |
2159 | uschar *tid = string_sprintf("%s transport", tblock->name); | |
2160 | smtp_transport_options_block *ob = | |
2161 | (smtp_transport_options_block *)(tblock->options_block); | |
2162 | host_item *hostlist = addrlist->host_list; | |
2163 | host_item *host = NULL; | |
2164 | ||
2165 | DEBUG(D_transport) | |
2166 | { | |
2167 | debug_printf("%s transport entered\n", tblock->name); | |
2168 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2169 | debug_printf(" %s\n", addr->address); | |
2170 | if (continuing) debug_printf("already connected to %s [%s]\n", | |
2171 | continue_hostname, continue_host_address); | |
2172 | } | |
2173 | ||
f6c332bd PH |
2174 | /* Set the flag requesting that these hosts be added to the waiting |
2175 | database if the delivery fails temporarily or if we are running with | |
2176 | queue_smtp or a 2-stage queue run. This gets unset for certain | |
2177 | kinds of error, typically those that are specific to the message. */ | |
2178 | ||
2179 | update_waiting = TRUE; | |
2180 | ||
0756eb3c PH |
2181 | /* If a host list is not defined for the addresses - they must all have the |
2182 | same one in order to be passed to a single transport - or if the transport has | |
2183 | a host list with hosts_override set, use the host list supplied with the | |
2184 | transport. It is an error for this not to exist. */ | |
2185 | ||
2186 | if (hostlist == NULL || (ob->hosts_override && ob->hosts != NULL)) | |
2187 | { | |
2188 | if (ob->hosts == NULL) | |
2189 | { | |
2190 | addrlist->message = string_sprintf("%s transport called with no hosts set", | |
2191 | tblock->name); | |
2192 | addrlist->transport_return = PANIC; | |
2193 | return FALSE; /* Only top address has status */ | |
2194 | } | |
2195 | ||
2196 | DEBUG(D_transport) debug_printf("using the transport's hosts: %s\n", | |
2197 | ob->hosts); | |
2198 | ||
2199 | /* If the transport's host list contains no '$' characters, and we are not | |
2200 | randomizing, it is fixed and therefore a chain of hosts can be built once | |
2201 | and for all, and remembered for subsequent use by other calls to this | |
2202 | transport. If, on the other hand, the host list does contain '$', or we are | |
2203 | randomizing its order, we have to rebuild it each time. In the fixed case, | |
2204 | as the hosts string will never be used again, it doesn't matter that we | |
2205 | replace all the : characters with zeros. */ | |
2206 | ||
2207 | if (ob->hostlist == NULL) | |
2208 | { | |
2209 | uschar *s = ob->hosts; | |
2210 | ||
2211 | if (Ustrchr(s, '$') != NULL) | |
2212 | { | |
2213 | expanded_hosts = expand_string(s); | |
2214 | if (expanded_hosts == NULL) | |
2215 | { | |
2216 | addrlist->message = string_sprintf("failed to expand list of hosts " | |
2217 | "\"%s\" in %s transport: %s", s, tblock->name, expand_string_message); | |
2218 | addrlist->transport_return = search_find_defer? DEFER : PANIC; | |
2219 | return FALSE; /* Only top address has status */ | |
2220 | } | |
2221 | DEBUG(D_transport) debug_printf("expanded list of hosts \"%s\" to " | |
2222 | "\"%s\"\n", s, expanded_hosts); | |
2223 | s = expanded_hosts; | |
2224 | } | |
2225 | else | |
2226 | if (ob->hosts_randomize) s = expanded_hosts = string_copy(s); | |
2227 | ||
2228 | host_build_hostlist(&hostlist, s, ob->hosts_randomize); | |
2229 | ||
2230 | /* If there was no expansion of hosts, save the host list for | |
2231 | next time. */ | |
2232 | ||
2233 | if (expanded_hosts == NULL) ob->hostlist = hostlist; | |
2234 | } | |
2235 | ||
2236 | /* This is not the first time this transport has been run in this delivery; | |
2237 | the host list was built previously. */ | |
2238 | ||
2239 | else hostlist = ob->hostlist; | |
2240 | } | |
2241 | ||
2242 | /* The host list was supplied with the address. If hosts_randomize is set, we | |
2243 | must sort it into a random order if it did not come from MX records and has not | |
2244 | already been randomized (but don't bother if continuing down an existing | |
2245 | connection). */ | |
2246 | ||
2247 | else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continuing) | |
2248 | { | |
2249 | host_item *newlist = NULL; | |
2250 | while (hostlist != NULL) | |
2251 | { | |
2252 | host_item *h = hostlist; | |
2253 | hostlist = hostlist->next; | |
2254 | ||
2255 | h->sort_key = random_number(100); | |
2256 | ||
2257 | if (newlist == NULL) | |
2258 | { | |
2259 | h->next = NULL; | |
2260 | newlist = h; | |
2261 | } | |
2262 | else if (h->sort_key < newlist->sort_key) | |
2263 | { | |
2264 | h->next = newlist; | |
2265 | newlist = h; | |
2266 | } | |
2267 | else | |
2268 | { | |
2269 | host_item *hh = newlist; | |
2270 | while (hh->next != NULL) | |
2271 | { | |
2272 | if (h->sort_key < hh->next->sort_key) break; | |
2273 | hh = hh->next; | |
2274 | } | |
2275 | h->next = hh->next; | |
2276 | hh->next = h; | |
2277 | } | |
2278 | } | |
2279 | ||
2280 | hostlist = addrlist->host_list = newlist; | |
2281 | } | |
2282 | ||
2283 | ||
2d280592 | 2284 | /* Sort out the default port. */ |
0756eb3c PH |
2285 | |
2286 | if (!smtp_get_port(ob->port, addrlist, &port, tid)) return FALSE; | |
0756eb3c PH |
2287 | |
2288 | ||
2289 | /* For each host-plus-IP-address on the list: | |
2290 | ||
2291 | . If this is a continued delivery and the host isn't the one with the | |
2292 | current connection, skip. | |
2293 | ||
2294 | . If the status is unusable (i.e. previously failed or retry checked), skip. | |
2295 | ||
2296 | . If no IP address set, get the address, either by turning the name into | |
2297 | an address, calling gethostbyname if gethostbyname is on, or by calling | |
2298 | the DNS. The DNS may yield multiple addresses, in which case insert the | |
2299 | extra ones into the list. | |
2300 | ||
2301 | . Get the retry data if not previously obtained for this address and set the | |
2302 | field which remembers the state of this address. Skip if the retry time is | |
2303 | not reached. If not, remember whether retry data was found. The retry string | |
2304 | contains both the name and the IP address. | |
2305 | ||
2306 | . Scan the list of addresses and mark those whose status is DEFER as | |
2307 | PENDING_DEFER. These are the only ones that will be processed in this cycle | |
2308 | of the hosts loop. | |
2309 | ||
2310 | . Make a delivery attempt - addresses marked PENDING_DEFER will be tried. | |
2311 | Some addresses may be successfully delivered, others may fail, and yet | |
2312 | others may get temporary errors and so get marked DEFER. | |
2313 | ||
2314 | . The return from the delivery attempt is OK if a connection was made and a | |
2315 | valid SMTP dialogue was completed. Otherwise it is DEFER. | |
2316 | ||
2317 | . If OK, add a "remove" retry item for this host/IPaddress, if any. | |
2318 | ||
2319 | . If fail to connect, or other defer state, add a retry item. | |
2320 | ||
2321 | . If there are any addresses whose status is still DEFER, carry on to the | |
2322 | next host/IPaddress, unless we have tried the number of hosts given | |
533244af | 2323 | by hosts_max_try or hosts_max_try_hardlimit; otherwise return. Note that |
8e669ac1 PH |
2324 | there is some fancy logic for hosts_max_try that means its limit can be |
2325 | overstepped in some circumstances. | |
0756eb3c PH |
2326 | |
2327 | If we get to the end of the list, all hosts have deferred at least one address, | |
2328 | or not reached their retry times. If delay_after_cutoff is unset, it requests a | |
2329 | delivery attempt to those hosts whose last try was before the arrival time of | |
2330 | the current message. To cope with this, we have to go round the loop a second | |
2331 | time. After that, set the status and error data for any addresses that haven't | |
2332 | had it set already. */ | |
2333 | ||
2334 | for (cutoff_retry = 0; expired && | |
2335 | cutoff_retry < ((ob->delay_after_cutoff)? 1 : 2); | |
2336 | cutoff_retry++) | |
2337 | { | |
2338 | host_item *nexthost = NULL; | |
2339 | int unexpired_hosts_tried = 0; | |
2340 | ||
2341 | for (host = hostlist; | |
8e669ac1 | 2342 | host != NULL && |
533244af PH |
2343 | unexpired_hosts_tried < ob->hosts_max_try && |
2344 | total_hosts_tried < ob->hosts_max_try_hardlimit; | |
0756eb3c PH |
2345 | host = nexthost) |
2346 | { | |
2347 | int rc; | |
2348 | int host_af; | |
2349 | uschar *rs; | |
2350 | BOOL serialized = FALSE; | |
2351 | BOOL host_is_expired = FALSE; | |
2352 | BOOL message_defer = FALSE; | |
2353 | BOOL ifchanges = FALSE; | |
2354 | BOOL some_deferred = FALSE; | |
2355 | address_item *first_addr = NULL; | |
2356 | uschar *interface = NULL; | |
2357 | uschar *retry_host_key = NULL; | |
2358 | uschar *retry_message_key = NULL; | |
2359 | uschar *serialize_key = NULL; | |
2360 | ||
9c4e8f60 PH |
2361 | /* Default next host is next host. :-) But this can vary if the |
2362 | hosts_max_try limit is hit (see below). It may also be reset if a host | |
2363 | address is looked up here (in case the host was multihomed). */ | |
2364 | ||
2365 | nexthost = host->next; | |
2366 | ||
0756eb3c PH |
2367 | /* If the address hasn't yet been obtained from the host name, look it up |
2368 | now, unless the host is already marked as unusable. If it is marked as | |
2369 | unusable, it means that the router was unable to find its IP address (in | |
2370 | the DNS or wherever) OR we are in the 2nd time round the cutoff loop, and | |
2371 | the lookup failed last time. We don't get this far if *all* MX records | |
2372 | point to non-existent hosts; that is treated as a hard error. | |
2373 | ||
2374 | We can just skip this host entirely. When the hosts came from the router, | |
2375 | the address will timeout based on the other host(s); when the address is | |
2376 | looked up below, there is an explicit retry record added. | |
2377 | ||
2378 | Note that we mustn't skip unusable hosts if the address is not unset; they | |
2379 | may be needed as expired hosts on the 2nd time round the cutoff loop. */ | |
2380 | ||
2381 | if (host->address == NULL) | |
2382 | { | |
322050c2 | 2383 | int new_port, flags; |
7cd1141b | 2384 | host_item *hh; |
0756eb3c PH |
2385 | uschar *canonical_name; |
2386 | ||
2387 | if (host->status >= hstatus_unusable) | |
2388 | { | |
2389 | DEBUG(D_transport) debug_printf("%s has no address and is unusable - skipping\n", | |
2390 | host->name); | |
2391 | continue; | |
2392 | } | |
2393 | ||
2394 | DEBUG(D_transport) debug_printf("getting address for %s\n", host->name); | |
2395 | ||
7cd1141b PH |
2396 | /* The host name is permitted to have an attached port. Find it, and |
2397 | strip it from the name. Just remember it for now. */ | |
2398 | ||
2399 | new_port = host_item_get_port(host); | |
2400 | ||
2401 | /* Count hosts looked up */ | |
2402 | ||
0756eb3c PH |
2403 | hosts_looked_up++; |
2404 | ||
2405 | /* Find by name if so configured, or if it's an IP address. We don't | |
2406 | just copy the IP address, because we need the test-for-local to happen. */ | |
2407 | ||
322050c2 PH |
2408 | flags = HOST_FIND_BY_A; |
2409 | if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE; | |
2410 | if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS; | |
2411 | ||
7e66e54d | 2412 | if (ob->gethostbyname || string_is_ip_address(host->name, NULL) != 0) |
322050c2 | 2413 | rc = host_find_byname(host, NULL, flags, &canonical_name, TRUE); |
0756eb3c | 2414 | else |
0756eb3c PH |
2415 | rc = host_find_bydns(host, NULL, flags, NULL, NULL, NULL, |
2416 | &canonical_name, NULL); | |
0756eb3c | 2417 | |
7cd1141b PH |
2418 | /* Update the host (and any additional blocks, resulting from |
2419 | multihoming) with a host-specific port, if any. */ | |
2420 | ||
2421 | for (hh = host; hh != nexthost; hh = hh->next) hh->port = new_port; | |
2422 | ||
0756eb3c PH |
2423 | /* Failure to find the host at this time (usually DNS temporary failure) |
2424 | is really a kind of routing failure rather than a transport failure. | |
2425 | Therefore we add a retry item of the routing kind, not to stop us trying | |
2426 | to look this name up here again, but to ensure the address gets timed | |
2427 | out if the failures go on long enough. A complete failure at this point | |
2428 | commonly points to a configuration error, but the best action is still | |
2429 | to carry on for the next host. */ | |
2430 | ||
2431 | if (rc == HOST_FIND_AGAIN || rc == HOST_FIND_FAILED) | |
2432 | { | |
2433 | retry_add_item(addrlist, string_sprintf("R:%s", host->name), 0); | |
2434 | expired = FALSE; | |
2435 | if (rc == HOST_FIND_AGAIN) hosts_defer++; else hosts_fail++; | |
2436 | DEBUG(D_transport) debug_printf("rc = %s for %s\n", (rc == HOST_FIND_AGAIN)? | |
2437 | "HOST_FIND_AGAIN" : "HOST_FIND_FAILED", host->name); | |
2438 | host->status = hstatus_unusable; | |
2439 | ||
2440 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2441 | { | |
2442 | if (addr->transport_return != DEFER) continue; | |
2443 | addr->basic_errno = ERRNO_UNKNOWNHOST; | |
2444 | addr->message = | |
2445 | string_sprintf("failed to lookup IP address for %s", host->name); | |
2446 | } | |
2447 | continue; | |
2448 | } | |
2449 | ||
2450 | /* If the host is actually the local host, we may have a problem, or | |
2451 | there may be some cunning configuration going on. In the problem case, | |
2452 | log things and give up. The default transport status is already DEFER. */ | |
2453 | ||
2454 | if (rc == HOST_FOUND_LOCAL && !ob->allow_localhost) | |
2455 | { | |
2456 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2457 | { | |
2458 | addr->basic_errno = 0; | |
2459 | addr->message = string_sprintf("%s transport found host %s to be " | |
2460 | "local", tblock->name, host->name); | |
2461 | } | |
2462 | goto END_TRANSPORT; | |
2463 | } | |
2464 | } /* End of block for IP address lookup */ | |
2465 | ||
2466 | /* If this is a continued delivery, we are interested only in the host | |
2467 | which matches the name of the existing open channel. The check is put | |
2468 | here after the local host lookup, in case the name gets expanded as a | |
2469 | result of the lookup. Set expired FALSE, to save the outer loop executing | |
2470 | twice. */ | |
2471 | ||
2472 | if (continuing && (Ustrcmp(continue_hostname, host->name) != 0 || | |
2473 | Ustrcmp(continue_host_address, host->address) != 0)) | |
2474 | { | |
2475 | expired = FALSE; | |
2476 | continue; /* With next host */ | |
2477 | } | |
2478 | ||
9c4e8f60 PH |
2479 | /* Reset the default next host in case a multihomed host whose addresses |
2480 | are not looked up till just above added to the host list. */ | |
83364d30 PH |
2481 | |
2482 | nexthost = host->next; | |
2483 | ||
0756eb3c PH |
2484 | /* If queue_smtp is set (-odqs or the first part of a 2-stage run), or the |
2485 | domain is in queue_smtp_domains, we don't actually want to attempt any | |
2486 | deliveries. When doing a queue run, queue_smtp_domains is always unset. If | |
2487 | there is a lookup defer in queue_smtp_domains, proceed as if the domain | |
2488 | were not in it. We don't want to hold up all SMTP deliveries! Except when | |
2489 | doing a two-stage queue run, don't do this if forcing. */ | |
2490 | ||
2491 | if ((!deliver_force || queue_2stage) && (queue_smtp || | |
cf39cf57 PH |
2492 | match_isinlist(addrlist->domain, &queue_smtp_domains, 0, |
2493 | &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK)) | |
0756eb3c PH |
2494 | { |
2495 | expired = FALSE; | |
2496 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2497 | { | |
2498 | if (addr->transport_return != DEFER) continue; | |
2499 | addr->message = US"domain matches queue_smtp_domains, or -odqs set"; | |
2500 | } | |
2501 | continue; /* With next host */ | |
2502 | } | |
2503 | ||
2504 | /* Count hosts being considered - purely for an intelligent comment | |
2505 | if none are usable. */ | |
2506 | ||
2507 | hosts_total++; | |
2508 | ||
2509 | /* Set $host and $host address now in case they are needed for the | |
2510 | interface expansion or the serialize_hosts check; they remain set if an | |
2511 | actual delivery happens. */ | |
2512 | ||
2513 | deliver_host = host->name; | |
2514 | deliver_host_address = host->address; | |
2515 | ||
7cd1141b PH |
2516 | /* Set up a string for adding to the retry key if the port number is not |
2517 | the standard SMTP port. A host may have its own port setting that overrides | |
2518 | the default. */ | |
2519 | ||
2520 | pistring = string_sprintf(":%d", (host->port == PORT_NONE)? | |
2521 | port : host->port); | |
2522 | if (Ustrcmp(pistring, ":25") == 0) pistring = US""; | |
2523 | ||
0756eb3c PH |
2524 | /* Select IPv4 or IPv6, and choose an outgoing interface. If the interface |
2525 | string changes upon expansion, we must add it to the key that is used for | |
2526 | retries, because connections to the same host from a different interface | |
2527 | should be treated separately. */ | |
2528 | ||
2529 | host_af = (Ustrchr(host->address, ':') == NULL)? AF_INET : AF_INET6; | |
2530 | if (!smtp_get_interface(ob->interface, host_af, addrlist, &ifchanges, | |
2531 | &interface, tid)) | |
2532 | return FALSE; | |
2533 | if (ifchanges) pistring = string_sprintf("%s/%s", pistring, interface); | |
2534 | ||
2535 | /* The first time round the outer loop, check the status of the host by | |
2536 | inspecting the retry data. The second time round, we are interested only | |
2537 | in expired hosts that haven't been tried since this message arrived. */ | |
2538 | ||
2539 | if (cutoff_retry == 0) | |
2540 | { | |
2541 | /* Ensure the status of the address is set by checking retry data if | |
2542 | necessary. There maybe host-specific retry data (applicable to all | |
2543 | messages) and also data for retries of a specific message at this host. | |
2544 | If either of these retry records are actually read, the keys used are | |
2545 | returned to save recomputing them later. */ | |
2546 | ||
2547 | host_is_expired = retry_check_address(addrlist->domain, host, pistring, | |
2548 | ob->retry_include_ip_address, &retry_host_key, &retry_message_key); | |
2549 | ||
2550 | DEBUG(D_transport) debug_printf("%s [%s]%s status = %s\n", host->name, | |
2551 | (host->address == NULL)? US"" : host->address, pistring, | |
2552 | (host->status == hstatus_usable)? "usable" : | |
2553 | (host->status == hstatus_unusable)? "unusable" : | |
2554 | (host->status == hstatus_unusable_expired)? "unusable (expired)" : "?"); | |
2555 | ||
2556 | /* Skip this address if not usable at this time, noting if it wasn't | |
2557 | actually expired, both locally and in the address. */ | |
2558 | ||
2559 | switch (host->status) | |
2560 | { | |
2561 | case hstatus_unusable: | |
2562 | expired = FALSE; | |
2563 | setflag(addrlist, af_retry_skipped); | |
2564 | /* Fall through */ | |
2565 | ||
2566 | case hstatus_unusable_expired: | |
2567 | switch (host->why) | |
2568 | { | |
2569 | case hwhy_retry: hosts_retry++; break; | |
2570 | case hwhy_failed: hosts_fail++; break; | |
2571 | case hwhy_deferred: hosts_defer++; break; | |
2572 | } | |
2573 | ||
2574 | /* If there was a retry message key, implying that previously there | |
2575 | was a message-specific defer, we don't want to update the list of | |
f6c332bd | 2576 | messages waiting for these hosts. */ |
0756eb3c | 2577 | |
f6c332bd | 2578 | if (retry_message_key != NULL) update_waiting = FALSE; |
0756eb3c PH |
2579 | continue; /* With the next host or IP address */ |
2580 | } | |
2581 | } | |
2582 | ||
2583 | /* Second time round the loop: if the address is set but expired, and | |
2584 | the message is newer than the last try, let it through. */ | |
2585 | ||
2586 | else | |
2587 | { | |
2588 | if (host->address == NULL || | |
2589 | host->status != hstatus_unusable_expired || | |
2590 | host->last_try > received_time) | |
2591 | continue; | |
2592 | DEBUG(D_transport) | |
2593 | debug_printf("trying expired host %s [%s]%s\n", | |
2594 | host->name, host->address, pistring); | |
2595 | host_is_expired = TRUE; | |
2596 | } | |
2597 | ||
2598 | /* Setting "expired=FALSE" doesn't actually mean not all hosts are expired; | |
2599 | it remains TRUE only if all hosts are expired and none are actually tried. | |
2600 | */ | |
2601 | ||
2602 | expired = FALSE; | |
2603 | ||
2604 | /* If this host is listed as one to which access must be serialized, | |
2605 | see if another Exim process has a connection to it, and if so, skip | |
2606 | this host. If not, update the database to record our connection to it | |
2607 | and remember this for later deletion. Do not do any of this if we are | |
2608 | sending the message down a pre-existing connection. */ | |
2609 | ||
2610 | if (!continuing && | |
2611 | verify_check_this_host(&(ob->serialize_hosts), NULL, host->name, | |
2612 | host->address, NULL) == OK) | |
2613 | { | |
2614 | serialize_key = string_sprintf("host-serialize-%s", host->name); | |
2615 | if (!enq_start(serialize_key)) | |
2616 | { | |
2617 | DEBUG(D_transport) | |
2618 | debug_printf("skipping host %s because another Exim process " | |
2619 | "is connected to it\n", host->name); | |
2620 | hosts_serial++; | |
2621 | continue; | |
2622 | } | |
2623 | serialized = TRUE; | |
2624 | } | |
2625 | ||
2626 | /* OK, we have an IP address that is not waiting for its retry time to | |
2627 | arrive (it might be expired) OR (second time round the loop) we have an | |
2628 | expired host that hasn't been tried since the message arrived. Have a go | |
2629 | at delivering the message to it. First prepare the addresses by flushing | |
2630 | out the result of previous attempts, and finding the first address that | |
2631 | is still to be delivered. */ | |
2632 | ||
2633 | first_addr = prepare_addresses(addrlist, host); | |
2634 | ||
2635 | DEBUG(D_transport) debug_printf("delivering %s to %s [%s] (%s%s)\n", | |
2636 | message_id, host->name, host->address, addrlist->address, | |
2637 | (addrlist->next == NULL)? "" : ", ..."); | |
2638 | ||
2639 | set_process_info("delivering %s to %s [%s] (%s%s)", | |
2640 | message_id, host->name, host->address, addrlist->address, | |
2641 | (addrlist->next == NULL)? "" : ", ..."); | |
2642 | ||
2643 | /* This is not for real; don't do the delivery. If there are | |
2644 | any remaining hosts, list them. */ | |
2645 | ||
2646 | if (dont_deliver) | |
2647 | { | |
2648 | host_item *host2; | |
447d236c | 2649 | set_errno(addrlist, 0, NULL, OK, FALSE); |
0756eb3c PH |
2650 | for (addr = addrlist; addr != NULL; addr = addr->next) |
2651 | { | |
2652 | addr->host_used = host; | |
2653 | addr->special_action = '*'; | |
2654 | addr->message = US"delivery bypassed by -N option"; | |
2655 | } | |
2656 | DEBUG(D_transport) | |
2657 | { | |
2658 | debug_printf("*** delivery by %s transport bypassed by -N option\n" | |
2659 | "*** host and remaining hosts:\n", tblock->name); | |
2660 | for (host2 = host; host2 != NULL; host2 = host2->next) | |
2661 | debug_printf(" %s [%s]\n", host2->name, | |
2662 | (host2->address == NULL)? US"unset" : host2->address); | |
2663 | } | |
2664 | rc = OK; | |
2665 | } | |
2666 | ||
2667 | /* This is for real. If the host is expired, we don't count it for | |
2668 | hosts_max_retry. This ensures that all hosts must expire before an address | |
8e669ac1 | 2669 | is timed out, unless hosts_max_try_hardlimit (which protects against |
533244af | 2670 | lunatic DNS configurations) is reached. |
8e669ac1 | 2671 | |
533244af PH |
2672 | If the host is not expired and we are about to hit the hosts_max_retry |
2673 | limit, check to see if there is a subsequent hosts with a different MX | |
2674 | value. If so, make that the next host, and don't count this one. This is a | |
2675 | heuristic to make sure that different MXs do get tried. With a normal kind | |
2676 | of retry rule, they would get tried anyway when the earlier hosts were | |
2677 | delayed, but if the domain has a "retry every time" type of rule - as is | |
2678 | often used for the the very large ISPs, that won't happen. */ | |
0756eb3c PH |
2679 | |
2680 | else | |
2681 | { | |
2682 | if (!host_is_expired && ++unexpired_hosts_tried >= ob->hosts_max_try) | |
2683 | { | |
2684 | host_item *h; | |
2685 | DEBUG(D_transport) | |
2686 | debug_printf("hosts_max_try limit reached with this host\n"); | |
2687 | for (h = host; h != NULL; h = h->next) | |
2688 | if (h->mx != host->mx) break; | |
2689 | if (h != NULL) | |
2690 | { | |
2691 | nexthost = h; | |
2692 | unexpired_hosts_tried--; | |
2693 | DEBUG(D_transport) debug_printf("however, a higher MX host exists " | |
2694 | "and will be tried\n"); | |
2695 | } | |
2696 | } | |
2697 | ||
2698 | /* Attempt the delivery. */ | |
2699 | ||
533244af | 2700 | total_hosts_tried++; |
0756eb3c PH |
2701 | rc = smtp_deliver(addrlist, host, host_af, port, interface, tblock, |
2702 | expanded_hosts != NULL, &message_defer, FALSE); | |
2703 | ||
2704 | /* Yield is one of: | |
2705 | OK => connection made, each address contains its result; | |
2706 | message_defer is set for message-specific defers (when all | |
2707 | recipients are marked defer) | |
2708 | DEFER => there was a non-message-specific delivery problem; | |
2709 | ERROR => there was a problem setting up the arguments for a filter, | |
2710 | or there was a problem with expanding added headers | |
2711 | */ | |
2712 | ||
2713 | /* If the result is not OK, there was a non-message-specific problem. | |
2714 | If the result is DEFER, we need to write to the logs saying what happened | |
2715 | for this particular host, except in the case of authentication and TLS | |
2716 | failures, where the log has already been written. If all hosts defer a | |
2717 | general message is written at the end. */ | |
2718 | ||
2719 | if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL && | |
2720 | first_addr->basic_errno != ERRNO_TLSFAILURE) | |
2721 | write_logs(first_addr, host); | |
2722 | ||
2723 | /* If STARTTLS was accepted, but there was a failure in setting up the | |
2724 | TLS session (usually a certificate screwup), and the host is not in | |
2725 | hosts_require_tls, and tls_tempfail_tryclear is true, try again, with | |
2726 | TLS forcibly turned off. We have to start from scratch with a new SMTP | |
2727 | connection. That's why the retry is done from here, not from within | |
2728 | smtp_deliver(). [Rejections of STARTTLS itself don't screw up the | |
2729 | session, so the in-clear transmission after those errors, if permitted, | |
2730 | happens inside smtp_deliver().] */ | |
2731 | ||
2732 | #ifdef SUPPORT_TLS | |
2733 | if (rc == DEFER && first_addr->basic_errno == ERRNO_TLSFAILURE && | |
2734 | ob->tls_tempfail_tryclear && | |
2735 | verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name, | |
2736 | host->address, NULL) != OK) | |
2737 | { | |
2738 | log_write(0, LOG_MAIN, "TLS session failure: delivering unencrypted " | |
2739 | "to %s [%s] (not in hosts_require_tls)", host->name, host->address); | |
2740 | first_addr = prepare_addresses(addrlist, host); | |
2741 | rc = smtp_deliver(addrlist, host, host_af, port, interface, tblock, | |
2742 | expanded_hosts != NULL, &message_defer, TRUE); | |
2743 | if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL) | |
2744 | write_logs(first_addr, host); | |
2745 | } | |
2746 | #endif | |
2747 | } | |
2748 | ||
2749 | /* Delivery attempt finished */ | |
2750 | ||
2751 | rs = (rc == OK)? US"OK" : (rc == DEFER)? US"DEFER" : (rc == ERROR)? | |
2752 | US"ERROR" : US"?"; | |
2753 | ||
2754 | set_process_info("delivering %s: just tried %s [%s] for %s%s: result %s", | |
2755 | message_id, host->name, host->address, addrlist->address, | |
2756 | (addrlist->next == NULL)? "" : " (& others)", rs); | |
2757 | ||
2758 | /* Release serialization if set up */ | |
2759 | ||
2760 | if (serialized) enq_end(serialize_key); | |
2761 | ||
2762 | /* If the result is DEFER, or if a host retry record is known to exist, we | |
2763 | need to add an item to the retry chain for updating the retry database | |
2764 | at the end of delivery. We only need to add the item to the top address, | |
2765 | of course. Also, if DEFER, we mark the IP address unusable so as to skip it | |
2766 | for any other delivery attempts using the same address. (It is copied into | |
2767 | the unusable tree at the outer level, so even if different address blocks | |
2768 | contain the same address, it still won't get tried again.) */ | |
2769 | ||
2770 | if (rc == DEFER || retry_host_key != NULL) | |
2771 | { | |
2772 | int delete_flag = (rc != DEFER)? rf_delete : 0; | |
2773 | if (retry_host_key == NULL) | |
2774 | { | |
2775 | retry_host_key = ob->retry_include_ip_address? | |
2776 | string_sprintf("T:%S:%s%s", host->name, host->address, pistring) : | |
2777 | string_sprintf("T:%S%s", host->name, pistring); | |
2778 | } | |
2779 | ||
2780 | /* If a delivery of another message over an existing SMTP connection | |
2781 | yields DEFER, we do NOT set up retry data for the host. This covers the | |
2782 | case when there are delays in routing the addresses in the second message | |
2783 | that are so long that the server times out. This is alleviated by not | |
2784 | routing addresses that previously had routing defers when handling an | |
2785 | existing connection, but even so, this case may occur (e.g. if a | |
2786 | previously happily routed address starts giving routing defers). If the | |
2787 | host is genuinely down, another non-continued message delivery will | |
2788 | notice it soon enough. */ | |
2789 | ||
2790 | if (delete_flag != 0 || !continuing) | |
2791 | retry_add_item(first_addr, retry_host_key, rf_host | delete_flag); | |
2792 | ||
2793 | /* We may have tried an expired host, if its retry time has come; ensure | |
2794 | the status reflects the expiry for the benefit of any other addresses. */ | |
2795 | ||
2796 | if (rc == DEFER) | |
2797 | { | |
2798 | host->status = (host_is_expired)? | |
2799 | hstatus_unusable_expired : hstatus_unusable; | |
2800 | host->why = hwhy_deferred; | |
2801 | } | |
2802 | } | |
2803 | ||
2804 | /* If message_defer is set (host was OK, but every recipient got deferred | |
2805 | because of some message-specific problem), or if that had happened | |
2806 | previously so that a message retry key exists, add an appropriate item | |
2807 | to the retry chain. Note that if there was a message defer but now there is | |
2808 | a host defer, the message defer record gets deleted. That seems perfectly | |
2809 | reasonable. Also, stop the message from being remembered as waiting | |
f6c332bd | 2810 | for specific hosts. */ |
0756eb3c PH |
2811 | |
2812 | if (message_defer || retry_message_key != NULL) | |
2813 | { | |
2814 | int delete_flag = message_defer? 0 : rf_delete; | |
2815 | if (retry_message_key == NULL) | |
2816 | { | |
2817 | retry_message_key = ob->retry_include_ip_address? | |
2818 | string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring, | |
2819 | message_id) : | |
2820 | string_sprintf("T:%S%s:%s", host->name, pistring, message_id); | |
2821 | } | |
2822 | retry_add_item(addrlist, retry_message_key, | |
2823 | rf_message | rf_host | delete_flag); | |
f6c332bd | 2824 | update_waiting = FALSE; |
0756eb3c PH |
2825 | } |
2826 | ||
2827 | /* Any return other than DEFER (that is, OK or ERROR) means that the | |
2828 | addresses have got their final statuses filled in for this host. In the OK | |
2829 | case, see if any of them are deferred. */ | |
2830 | ||
2831 | if (rc == OK) | |
2832 | { | |
2833 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2834 | { | |
2835 | if (addr->transport_return == DEFER) | |
2836 | { | |
2837 | some_deferred = TRUE; | |
2838 | break; | |
2839 | } | |
2840 | } | |
2841 | } | |
2842 | ||
2843 | /* If no addresses deferred or the result was ERROR, return. We do this for | |
2844 | ERROR because a failing filter set-up or add_headers expansion is likely to | |
2845 | fail for any host we try. */ | |
2846 | ||
2847 | if (rc == ERROR || (rc == OK && !some_deferred)) | |
2848 | { | |
2849 | DEBUG(D_transport) debug_printf("Leaving %s transport\n", tblock->name); | |
2850 | return TRUE; /* Each address has its status */ | |
2851 | } | |
2852 | ||
2853 | /* If the result was DEFER or some individual addresses deferred, let | |
2854 | the loop run to try other hosts with the deferred addresses, except for the | |
2855 | case when we were trying to deliver down an existing channel and failed. | |
2856 | Don't try any other hosts in this case. */ | |
2857 | ||
2858 | if (continuing) break; | |
2859 | ||
2860 | /* If the whole delivery, or some individual addresses, were deferred and | |
2861 | there are more hosts that could be tried, do not count this host towards | |
2862 | the hosts_max_try limit if the age of the message is greater than the | |
2863 | maximum retry time for this host. This means we may try try all hosts, | |
2864 | ignoring the limit, when messages have been around for some time. This is | |
2865 | important because if we don't try all hosts, the address will never time | |
533244af | 2866 | out. NOTE: this does not apply to hosts_max_try_hardlimit. */ |
0756eb3c PH |
2867 | |
2868 | if ((rc == DEFER || some_deferred) && nexthost != NULL) | |
2869 | { | |
2870 | BOOL timedout; | |
2871 | retry_config *retry = retry_find_config(host->name, NULL, 0, 0); | |
2872 | ||
2873 | if (retry != NULL && retry->rules != NULL) | |
2874 | { | |
2875 | retry_rule *last_rule; | |
2876 | for (last_rule = retry->rules; | |
2877 | last_rule->next != NULL; | |
2878 | last_rule = last_rule->next); | |
2879 | timedout = time(NULL) - received_time > last_rule->timeout; | |
2880 | } | |
2881 | else timedout = TRUE; /* No rule => timed out */ | |
2882 | ||
2883 | if (timedout) | |
2884 | { | |
2885 | unexpired_hosts_tried--; | |
2886 | DEBUG(D_transport) debug_printf("temporary delivery error(s) override " | |
2887 | "hosts_max_try (message older than host's retry time)\n"); | |
2888 | } | |
2889 | } | |
2890 | } /* End of loop for trying multiple hosts. */ | |
2891 | ||
2892 | /* This is the end of the loop that repeats iff expired is TRUE and | |
2893 | ob->delay_after_cutoff is FALSE. The second time round we will | |
2894 | try those hosts that haven't been tried since the message arrived. */ | |
2895 | ||
2896 | DEBUG(D_transport) | |
2897 | { | |
2898 | debug_printf("all IP addresses skipped or deferred at least one address\n"); | |
2899 | if (expired && !ob->delay_after_cutoff && cutoff_retry == 0) | |
2900 | debug_printf("retrying IP addresses not tried since message arrived\n"); | |
2901 | } | |
2902 | } | |
2903 | ||
2904 | ||
2905 | /* Get here if all IP addresses are skipped or defer at least one address. In | |
2906 | MUA wrapper mode, this will happen only for connection or other non-message- | |
2907 | specific failures. Force the delivery status for all addresses to FAIL. */ | |
2908 | ||
2909 | if (mua_wrapper) | |
2910 | { | |
2911 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2912 | addr->transport_return = FAIL; | |
2913 | goto END_TRANSPORT; | |
2914 | } | |
2915 | ||
2916 | /* In the normal, non-wrapper case, add a standard message to each deferred | |
2917 | address if there hasn't been an error, that is, if it hasn't actually been | |
2918 | tried this time. The variable "expired" will be FALSE if any deliveries were | |
2919 | actually tried, or if there was at least one host that was not expired. That | |
2920 | is, it is TRUE only if no deliveries were tried and all hosts were expired. If | |
2921 | a delivery has been tried, an error code will be set, and the failing of the | |
2922 | message is handled by the retry code later. | |
2923 | ||
2924 | If queue_smtp is set, or this transport was called to send a subsequent message | |
2925 | down an existing TCP/IP connection, and something caused the host not to be | |
2926 | found, we end up here, but can detect these cases and handle them specially. */ | |
2927 | ||
2928 | for (addr = addrlist; addr != NULL; addr = addr->next) | |
2929 | { | |
2930 | /* If host is not NULL, it means that we stopped processing the host list | |
533244af PH |
2931 | because of hosts_max_try or hosts_max_try_hardlimit. In the former case, this |
2932 | means we need to behave as if some hosts were skipped because their retry | |
2933 | time had not come. Specifically, this prevents the address from timing out. | |
8e669ac1 | 2934 | However, if we have hit hosts_max_try_hardlimit, we want to behave as if all |
533244af | 2935 | hosts were tried. */ |
0756eb3c PH |
2936 | |
2937 | if (host != NULL) | |
2938 | { | |
533244af PH |
2939 | if (total_hosts_tried >= ob->hosts_max_try_hardlimit) |
2940 | { | |
2941 | DEBUG(D_transport) | |
2942 | debug_printf("hosts_max_try_hardlimit reached: behave as if all " | |
2943 | "hosts were tried\n"); | |
2944 | } | |
2945 | else | |
8e669ac1 | 2946 | { |
533244af PH |
2947 | DEBUG(D_transport) |
2948 | debug_printf("hosts_max_try limit caused some hosts to be skipped\n"); | |
2949 | setflag(addr, af_retry_skipped); | |
8e669ac1 | 2950 | } |
0756eb3c PH |
2951 | } |
2952 | ||
2953 | if (queue_smtp) /* no deliveries attempted */ | |
2954 | { | |
2955 | addr->transport_return = DEFER; | |
2956 | addr->basic_errno = 0; | |
2957 | addr->message = US"SMTP delivery explicitly queued"; | |
2958 | } | |
2959 | ||
2960 | else if (addr->transport_return == DEFER && | |
2961 | (addr->basic_errno == ERRNO_UNKNOWNERROR || addr->basic_errno == 0) && | |
2962 | addr->message == NULL) | |
2963 | { | |
2964 | addr->basic_errno = ERRNO_HRETRY; | |
2965 | if (continue_hostname != NULL) | |
2966 | { | |
2967 | addr->message = US"no host found for existing SMTP connection"; | |
2968 | } | |
2969 | else if (expired) | |
2970 | { | |
fffffe4c | 2971 | setflag(addr, af_pass_message); /* This is not a security risk */ |
0756eb3c PH |
2972 | addr->message = (ob->delay_after_cutoff)? |
2973 | US"retry time not reached for any host after a long failure period" : | |
2974 | US"all hosts have been failing for a long time and were last tried " | |
2975 | "after this message arrived"; | |
2976 | ||
2977 | /* If we are already using fallback hosts, or there are no fallback hosts | |
2978 | defined, convert the result to FAIL to cause a bounce. */ | |
2979 | ||
2980 | if (addr->host_list == addr->fallback_hosts || | |
2981 | addr->fallback_hosts == NULL) | |
2982 | addr->transport_return = FAIL; | |
2983 | } | |
2984 | else | |
2985 | { | |
2986 | if (hosts_retry == hosts_total) | |
2987 | addr->message = US"retry time not reached for any host"; | |
2988 | else if (hosts_fail == hosts_total) | |
2989 | addr->message = US"all host address lookups failed permanently"; | |
2990 | else if (hosts_defer == hosts_total) | |
2991 | addr->message = US"all host address lookups failed temporarily"; | |
2992 | else if (hosts_serial == hosts_total) | |
2993 | addr->message = US"connection limit reached for all hosts"; | |
2994 | else if (hosts_fail+hosts_defer == hosts_total) | |
2995 | addr->message = US"all host address lookups failed"; | |
2996 | else addr->message = US"some host address lookups failed and retry time " | |
2997 | "not reached for other hosts or connection limit reached"; | |
2998 | } | |
2999 | } | |
3000 | } | |
3001 | ||
3002 | /* Update the database which keeps information about which messages are waiting | |
f6c332bd PH |
3003 | for which hosts to become available. For some message-specific errors, the |
3004 | update_waiting flag is turned off because we don't want follow-on deliveries in | |
3005 | those cases. */ | |
0756eb3c | 3006 | |
f6c332bd | 3007 | if (update_waiting) transport_update_waiting(hostlist, tblock->name); |
0756eb3c PH |
3008 | |
3009 | END_TRANSPORT: | |
3010 | ||
3011 | DEBUG(D_transport) debug_printf("Leaving %s transport\n", tblock->name); | |
3012 | ||
3013 | return TRUE; /* Each address has its status */ | |
3014 | } | |
3015 | ||
3016 | /* End of transport/smtp.c */ |