Commit | Line | Data |
---|---|---|
184e8823 | 1 | /* $Cambridge: exim/src/src/string.c,v 1.11 2007/01/08 10:50:18 ph10 Exp $ */ |
059ec3d9 PH |
2 | |
3 | /************************************************* | |
4 | * Exim - an Internet mail transport agent * | |
5 | *************************************************/ | |
6 | ||
184e8823 | 7 | /* Copyright (c) University of Cambridge 1995 - 2007 */ |
059ec3d9 PH |
8 | /* See the file NOTICE for conditions of use and distribution. */ |
9 | ||
10 | /* Miscellaneous string-handling functions. Some are not required for | |
11 | utilities and tests, and are cut out by the COMPILE_UTILITY macro. */ | |
12 | ||
13 | ||
14 | #include "exim.h" | |
15 | ||
16 | ||
17 | #ifndef COMPILE_UTILITY | |
18 | /************************************************* | |
19 | * Test for IP address * | |
20 | *************************************************/ | |
21 | ||
22 | /* This used just to be a regular expression, but with IPv6 things are a bit | |
23 | more complicated. If the address contains a colon, it is assumed to be a v6 | |
24 | address (assuming HAVE_IPV6 is set). If a mask is permitted and one is present, | |
25 | and maskptr is not NULL, its offset is placed there. | |
26 | ||
27 | Arguments: | |
28 | s a string | |
29 | maskptr NULL if no mask is permitted to follow | |
30 | otherwise, points to an int where the offset of '/' is placed | |
1688f43b | 31 | if there is no / followed by trailing digits, *maskptr is set 0 |
059ec3d9 PH |
32 | |
33 | Returns: 0 if the string is not a textual representation of an IP address | |
34 | 4 if it is an IPv4 address | |
35 | 6 if it is an IPv6 address | |
36 | */ | |
37 | ||
38 | int | |
39 | string_is_ip_address(uschar *s, int *maskptr) | |
40 | { | |
41 | int i; | |
42 | int yield = 4; | |
43 | ||
44 | /* If an optional mask is permitted, check for it. If found, pass back the | |
45 | offset. */ | |
46 | ||
47 | if (maskptr != NULL) | |
48 | { | |
49 | uschar *ss = s + Ustrlen(s); | |
50 | *maskptr = 0; | |
51 | if (s != ss && isdigit(*(--ss))) | |
52 | { | |
53 | while (ss > s && isdigit(ss[-1])) ss--; | |
54 | if (ss > s && *(--ss) == '/') *maskptr = ss - s; | |
55 | } | |
56 | } | |
57 | ||
58 | /* A colon anywhere in the string => IPv6 address */ | |
59 | ||
60 | if (Ustrchr(s, ':') != NULL) | |
61 | { | |
62 | BOOL had_double_colon = FALSE; | |
63 | BOOL v4end = FALSE; | |
64 | int count = 0; | |
65 | ||
66 | yield = 6; | |
67 | ||
68 | /* An IPv6 address must start with hex digit or double colon. A single | |
69 | colon is invalid. */ | |
70 | ||
71 | if (*s == ':' && *(++s) != ':') return 0; | |
72 | ||
73 | /* Now read up to 8 components consisting of up to 4 hex digits each. There | |
74 | may be one and only one appearance of double colon, which implies any number | |
75 | of binary zero bits. The number of preceding components is held in count. */ | |
76 | ||
77 | for (count = 0; count < 8; count++) | |
78 | { | |
79 | /* If the end of the string is reached before reading 8 components, the | |
80 | address is valid provided a double colon has been read. This also applies | |
81 | if we hit the / that introduces a mask or the % that introduces the | |
82 | interface specifier (scope id) of a link-local address. */ | |
83 | ||
84 | if (*s == 0 || *s == '%' || *s == '/') return had_double_colon? yield : 0; | |
85 | ||
86 | /* If a component starts with an additional colon, we have hit a double | |
87 | colon. This is permitted to appear once only, and counts as at least | |
88 | one component. The final component may be of this form. */ | |
89 | ||
90 | if (*s == ':') | |
91 | { | |
92 | if (had_double_colon) return 0; | |
93 | had_double_colon = TRUE; | |
94 | s++; | |
95 | continue; | |
96 | } | |
97 | ||
98 | /* If the remainder of the string contains a dot but no colons, we | |
99 | can expect a trailing IPv4 address. This is valid if either there has | |
100 | been no double-colon and this is the 7th component (with the IPv4 address | |
101 | being the 7th & 8th components), OR if there has been a double-colon | |
102 | and fewer than 6 components. */ | |
103 | ||
104 | if (Ustrchr(s, ':') == NULL && Ustrchr(s, '.') != NULL) | |
105 | { | |
106 | if ((!had_double_colon && count != 6) || | |
107 | (had_double_colon && count > 6)) return 0; | |
108 | v4end = TRUE; | |
109 | yield = 6; | |
110 | break; | |
111 | } | |
112 | ||
113 | /* Check for at least one and not more than 4 hex digits for this | |
114 | component. */ | |
115 | ||
116 | if (!isxdigit(*s++)) return 0; | |
117 | if (isxdigit(*s) && isxdigit(*(++s)) && isxdigit(*(++s))) s++; | |
118 | ||
119 | /* If the component is terminated by colon and there is more to | |
120 | follow, skip over the colon. If there is no more to follow the address is | |
121 | invalid. */ | |
122 | ||
123 | if (*s == ':' && *(++s) == 0) return 0; | |
124 | } | |
125 | ||
126 | /* If about to handle a trailing IPv4 address, drop through. Otherwise | |
127 | all is well if we are at the end of the string or at the mask or at a percent | |
128 | sign, which introduces the interface specifier (scope id) of a link local | |
129 | address. */ | |
130 | ||
1688f43b PH |
131 | if (!v4end) |
132 | return (*s == 0 || *s == '%' || | |
133 | (*s == '/' && maskptr != NULL && *maskptr != 0))? yield : 0; | |
059ec3d9 PH |
134 | } |
135 | ||
136 | /* Test for IPv4 address, which may be the tail-end of an IPv6 address. */ | |
137 | ||
138 | for (i = 0; i < 4; i++) | |
139 | { | |
140 | if (i != 0 && *s++ != '.') return 0; | |
141 | if (!isdigit(*s++)) return 0; | |
142 | if (isdigit(*s) && isdigit(*(++s))) s++; | |
143 | } | |
144 | ||
1688f43b PH |
145 | return (*s == 0 || (*s == '/' && maskptr != NULL && *maskptr != 0))? |
146 | yield : 0; | |
059ec3d9 PH |
147 | } |
148 | #endif /* COMPILE_UTILITY */ | |
149 | ||
150 | ||
151 | /************************************************* | |
152 | * Format message size * | |
153 | *************************************************/ | |
154 | ||
155 | /* Convert a message size in bytes to printing form, rounding | |
156 | according to the magnitude of the number. A value of zero causes | |
157 | a string of spaces to be returned. | |
158 | ||
159 | Arguments: | |
160 | size the message size in bytes | |
161 | buffer where to put the answer | |
162 | ||
163 | Returns: pointer to the buffer | |
164 | a string of exactly 5 characters is normally returned | |
165 | */ | |
166 | ||
167 | uschar * | |
168 | string_format_size(int size, uschar *buffer) | |
169 | { | |
170 | if (size == 0) Ustrcpy(CS buffer, " "); | |
171 | else if (size < 1024) sprintf(CS buffer, "%5d", size); | |
172 | else if (size < 10*1024) | |
173 | sprintf(CS buffer, "%4.1fK", (double)size / 1024.0); | |
174 | else if (size < 1024*1024) | |
175 | sprintf(CS buffer, "%4dK", (size + 512)/1024); | |
176 | else if (size < 10*1024*1024) | |
177 | sprintf(CS buffer, "%4.1fM", (double)size / (1024.0 * 1024.0)); | |
178 | else | |
179 | sprintf(CS buffer, "%4dM", (size + 512 * 1024)/(1024*1024)); | |
180 | return buffer; | |
181 | } | |
182 | ||
183 | ||
184 | ||
185 | #ifndef COMPILE_UTILITY | |
186 | /************************************************* | |
187 | * Convert a number to base 62 format * | |
188 | *************************************************/ | |
189 | ||
190 | /* Convert a long integer into an ASCII base 62 string. For Cygwin the value of | |
191 | BASE_62 is actually 36. Always return exactly 6 characters plus zero, in a | |
192 | static area. | |
193 | ||
194 | Argument: a long integer | |
195 | Returns: pointer to base 62 string | |
196 | */ | |
197 | ||
198 | uschar * | |
199 | string_base62(unsigned long int value) | |
200 | { | |
201 | static uschar yield[7]; | |
202 | uschar *p = yield + sizeof(yield) - 1; | |
203 | *p = 0; | |
204 | while (p > yield) | |
205 | { | |
206 | *(--p) = base62_chars[value % BASE_62]; | |
207 | value /= BASE_62; | |
208 | } | |
209 | return yield; | |
210 | } | |
211 | #endif /* COMPILE_UTILITY */ | |
212 | ||
213 | ||
214 | ||
215 | #ifndef COMPILE_UTILITY | |
216 | /************************************************* | |
217 | * Interpret escape sequence * | |
218 | *************************************************/ | |
219 | ||
220 | /* This function is called from several places where escape sequences are to be | |
221 | interpreted in strings. | |
222 | ||
223 | Arguments: | |
224 | pp points a pointer to the initiating "\" in the string; | |
225 | the pointer gets updated to point to the final character | |
226 | Returns: the value of the character escape | |
227 | */ | |
228 | ||
229 | int | |
230 | string_interpret_escape(uschar **pp) | |
231 | { | |
232 | int ch; | |
233 | uschar *p = *pp; | |
234 | ch = *(++p); | |
235 | if (isdigit(ch) && ch != '8' && ch != '9') | |
236 | { | |
237 | ch -= '0'; | |
238 | if (isdigit(p[1]) && p[1] != '8' && p[1] != '9') | |
239 | { | |
240 | ch = ch * 8 + *(++p) - '0'; | |
241 | if (isdigit(p[1]) && p[1] != '8' && p[1] != '9') | |
242 | ch = ch * 8 + *(++p) - '0'; | |
243 | } | |
244 | } | |
245 | else switch(ch) | |
246 | { | |
247 | case 'n': ch = '\n'; break; | |
248 | case 'r': ch = '\r'; break; | |
249 | case 't': ch = '\t'; break; | |
250 | case 'x': | |
251 | ch = 0; | |
252 | if (isxdigit(p[1])) | |
253 | { | |
254 | ch = ch * 16 + | |
255 | Ustrchr(hex_digits, tolower(*(++p))) - hex_digits; | |
256 | if (isxdigit(p[1])) ch = ch * 16 + | |
257 | Ustrchr(hex_digits, tolower(*(++p))) - hex_digits; | |
258 | } | |
259 | break; | |
260 | } | |
261 | *pp = p; | |
262 | return ch; | |
263 | } | |
264 | #endif /* COMPILE_UTILITY */ | |
265 | ||
266 | ||
267 | ||
268 | #ifndef COMPILE_UTILITY | |
269 | /************************************************* | |
270 | * Ensure string is printable * | |
271 | *************************************************/ | |
272 | ||
273 | /* This function is called for critical strings. It checks for any | |
274 | non-printing characters, and if any are found, it makes a new copy | |
275 | of the string with suitable escape sequences. It is most often called by the | |
276 | macro string_printing(), which sets allow_tab TRUE. | |
277 | ||
278 | Arguments: | |
279 | s the input string | |
280 | allow_tab TRUE to allow tab as a printing character | |
281 | ||
282 | Returns: string with non-printers encoded as printing sequences | |
283 | */ | |
284 | ||
285 | uschar * | |
286 | string_printing2(uschar *s, BOOL allow_tab) | |
287 | { | |
288 | int nonprintcount = 0; | |
289 | int length = 0; | |
290 | uschar *t = s; | |
291 | uschar *ss, *tt; | |
292 | ||
293 | while (*t != 0) | |
294 | { | |
295 | int c = *t++; | |
296 | if (!mac_isprint(c) || (!allow_tab && c == '\t')) nonprintcount++; | |
297 | length++; | |
298 | } | |
299 | ||
300 | if (nonprintcount == 0) return s; | |
301 | ||
302 | /* Get a new block of store guaranteed big enough to hold the | |
303 | expanded string. */ | |
304 | ||
305 | ss = store_get(length + nonprintcount * 4 + 1); | |
306 | ||
307 | /* Copy everying, escaping non printers. */ | |
308 | ||
309 | t = s; | |
310 | tt = ss; | |
311 | ||
312 | while (*t != 0) | |
313 | { | |
314 | int c = *t; | |
315 | if (mac_isprint(c) && (allow_tab || c != '\t')) *tt++ = *t++; else | |
316 | { | |
317 | *tt++ = '\\'; | |
318 | switch (*t) | |
319 | { | |
320 | case '\n': *tt++ = 'n'; break; | |
321 | case '\r': *tt++ = 'r'; break; | |
322 | case '\b': *tt++ = 'b'; break; | |
323 | case '\v': *tt++ = 'v'; break; | |
324 | case '\f': *tt++ = 'f'; break; | |
325 | case '\t': *tt++ = 't'; break; | |
326 | default: sprintf(CS tt, "%03o", *t); tt += 3; break; | |
327 | } | |
328 | t++; | |
329 | } | |
330 | } | |
331 | *tt = 0; | |
332 | return ss; | |
333 | } | |
334 | #endif /* COMPILE_UTILITY */ | |
335 | ||
336 | ||
337 | ||
338 | ||
339 | /************************************************* | |
340 | * Copy and save string * | |
341 | *************************************************/ | |
342 | ||
343 | /* This function assumes that memcpy() is faster than strcpy(). | |
344 | ||
345 | Argument: string to copy | |
346 | Returns: copy of string in new store | |
347 | */ | |
348 | ||
349 | uschar * | |
350 | string_copy(uschar *s) | |
351 | { | |
352 | int len = Ustrlen(s) + 1; | |
353 | uschar *ss = store_get(len); | |
354 | memcpy(ss, s, len); | |
355 | return ss; | |
356 | } | |
357 | ||
358 | ||
359 | ||
360 | /************************************************* | |
361 | * Copy and save string in malloc'd store * | |
362 | *************************************************/ | |
363 | ||
364 | /* This function assumes that memcpy() is faster than strcpy(). | |
365 | ||
366 | Argument: string to copy | |
367 | Returns: copy of string in new store | |
368 | */ | |
369 | ||
370 | uschar * | |
371 | string_copy_malloc(uschar *s) | |
372 | { | |
373 | int len = Ustrlen(s) + 1; | |
374 | uschar *ss = store_malloc(len); | |
375 | memcpy(ss, s, len); | |
376 | return ss; | |
377 | } | |
378 | ||
379 | ||
380 | ||
381 | /************************************************* | |
382 | * Copy, lowercase and save string * | |
383 | *************************************************/ | |
384 | ||
385 | /* | |
386 | Argument: string to copy | |
387 | Returns: copy of string in new store, with letters lowercased | |
388 | */ | |
389 | ||
390 | uschar * | |
391 | string_copylc(uschar *s) | |
392 | { | |
393 | uschar *ss = store_get(Ustrlen(s) + 1); | |
394 | uschar *p = ss; | |
395 | while (*s != 0) *p++ = tolower(*s++); | |
396 | *p = 0; | |
397 | return ss; | |
398 | } | |
399 | ||
400 | ||
401 | ||
402 | /************************************************* | |
403 | * Copy and save string, given length * | |
404 | *************************************************/ | |
405 | ||
406 | /* It is assumed the data contains no zeros. A zero is added | |
407 | onto the end. | |
408 | ||
409 | Arguments: | |
410 | s string to copy | |
411 | n number of characters | |
412 | ||
413 | Returns: copy of string in new store | |
414 | */ | |
415 | ||
416 | uschar * | |
417 | string_copyn(uschar *s, int n) | |
418 | { | |
419 | uschar *ss = store_get(n + 1); | |
420 | Ustrncpy(ss, s, n); | |
421 | ss[n] = 0; | |
422 | return ss; | |
423 | } | |
424 | ||
425 | ||
426 | /************************************************* | |
427 | * Copy, lowercase, and save string, given length * | |
428 | *************************************************/ | |
429 | ||
430 | /* It is assumed the data contains no zeros. A zero is added | |
431 | onto the end. | |
432 | ||
433 | Arguments: | |
434 | s string to copy | |
435 | n number of characters | |
436 | ||
437 | Returns: copy of string in new store, with letters lowercased | |
438 | */ | |
439 | ||
440 | uschar * | |
441 | string_copynlc(uschar *s, int n) | |
442 | { | |
443 | uschar *ss = store_get(n + 1); | |
444 | uschar *p = ss; | |
445 | while (n-- > 0) *p++ = tolower(*s++); | |
446 | *p = 0; | |
447 | return ss; | |
448 | } | |
449 | ||
450 | ||
451 | ||
452 | /************************************************* | |
453 | * Copy returned DNS domain name, de-escaping * | |
454 | *************************************************/ | |
455 | ||
456 | /* If a domain name contains top-bit characters, some resolvers return | |
457 | the fully qualified name with those characters turned into escapes. The | |
458 | convention is a backslash followed by _decimal_ digits. We convert these | |
459 | back into the original binary values. This will be relevant when | |
460 | allow_utf8_domains is set true and UTF-8 characters are used in domain | |
461 | names. Backslash can also be used to escape other characters, though we | |
462 | shouldn't come across them in domain names. | |
463 | ||
464 | Argument: the domain name string | |
465 | Returns: copy of string in new store, de-escaped | |
466 | */ | |
467 | ||
468 | uschar * | |
469 | string_copy_dnsdomain(uschar *s) | |
470 | { | |
471 | uschar *yield; | |
472 | uschar *ss = yield = store_get(Ustrlen(s) + 1); | |
473 | ||
474 | while (*s != 0) | |
475 | { | |
476 | if (*s != '\\') | |
477 | { | |
478 | *ss++ = *s++; | |
479 | } | |
480 | else if (isdigit(s[1])) | |
481 | { | |
482 | *ss++ = (s[1] - '0')*100 + (s[2] - '0')*10 + s[3] - '0'; | |
483 | s += 4; | |
484 | } | |
485 | else if (*(++s) != 0) | |
486 | { | |
487 | *ss++ = *s++; | |
488 | } | |
489 | } | |
490 | ||
491 | *ss = 0; | |
492 | return yield; | |
493 | } | |
494 | ||
495 | ||
496 | #ifndef COMPILE_UTILITY | |
497 | /************************************************* | |
498 | * Copy space-terminated or quoted string * | |
499 | *************************************************/ | |
500 | ||
501 | /* This function copies from a string until its end, or until whitespace is | |
502 | encountered, unless the string begins with a double quote, in which case the | |
503 | terminating quote is sought, and escaping within the string is done. The length | |
504 | of a de-quoted string can be no longer than the original, since escaping always | |
505 | turns n characters into 1 character. | |
506 | ||
507 | Argument: pointer to the pointer to the first character, which gets updated | |
508 | Returns: the new string | |
509 | */ | |
510 | ||
511 | uschar * | |
512 | string_dequote(uschar **sptr) | |
513 | { | |
514 | uschar *s = *sptr; | |
515 | uschar *t, *yield; | |
516 | ||
517 | /* First find the end of the string */ | |
518 | ||
519 | if (*s != '\"') | |
520 | { | |
521 | while (*s != 0 && !isspace(*s)) s++; | |
522 | } | |
523 | else | |
524 | { | |
525 | s++; | |
526 | while (*s != 0 && *s != '\"') | |
527 | { | |
528 | if (*s == '\\') (void)string_interpret_escape(&s); | |
529 | s++; | |
530 | } | |
531 | if (*s != 0) s++; | |
532 | } | |
533 | ||
534 | /* Get enough store to copy into */ | |
535 | ||
536 | t = yield = store_get(s - *sptr + 1); | |
537 | s = *sptr; | |
538 | ||
539 | /* Do the copy */ | |
540 | ||
541 | if (*s != '\"') | |
542 | { | |
543 | while (*s != 0 && !isspace(*s)) *t++ = *s++; | |
544 | } | |
545 | else | |
546 | { | |
547 | s++; | |
548 | while (*s != 0 && *s != '\"') | |
549 | { | |
550 | if (*s == '\\') *t++ = string_interpret_escape(&s); | |
551 | else *t++ = *s; | |
552 | s++; | |
553 | } | |
554 | if (*s != 0) s++; | |
555 | } | |
556 | ||
557 | /* Update the pointer and return the terminated copy */ | |
558 | ||
559 | *sptr = s; | |
560 | *t = 0; | |
561 | return yield; | |
562 | } | |
563 | #endif /* COMPILE_UTILITY */ | |
564 | ||
565 | ||
566 | ||
567 | /************************************************* | |
568 | * Format a string and save it * | |
569 | *************************************************/ | |
570 | ||
571 | /* The formatting is done by string_format, which checks the length of | |
572 | everything. | |
573 | ||
574 | Arguments: | |
575 | format a printf() format - deliberately char * rather than uschar * | |
576 | because it will most usually be a literal string | |
577 | ... arguments for format | |
578 | ||
579 | Returns: pointer to fresh piece of store containing sprintf'ed string | |
580 | */ | |
581 | ||
582 | uschar * | |
583 | string_sprintf(char *format, ...) | |
584 | { | |
585 | va_list ap; | |
586 | uschar buffer[STRING_SPRINTF_BUFFER_SIZE]; | |
587 | va_start(ap, format); | |
588 | if (!string_vformat(buffer, sizeof(buffer), format, ap)) | |
589 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, | |
590 | "string_sprintf expansion was longer than %d", sizeof(buffer)); | |
591 | va_end(ap); | |
592 | return string_copy(buffer); | |
593 | } | |
594 | ||
595 | ||
596 | ||
597 | /************************************************* | |
598 | * Case-independent strncmp() function * | |
599 | *************************************************/ | |
600 | ||
601 | /* | |
602 | Arguments: | |
603 | s first string | |
604 | t second string | |
605 | n number of characters to compare | |
606 | ||
607 | Returns: < 0, = 0, or > 0, according to the comparison | |
608 | */ | |
609 | ||
610 | int | |
611 | strncmpic(uschar *s, uschar *t, int n) | |
612 | { | |
613 | while (n--) | |
614 | { | |
615 | int c = tolower(*s++) - tolower(*t++); | |
616 | if (c) return c; | |
617 | } | |
618 | return 0; | |
619 | } | |
620 | ||
621 | ||
622 | /************************************************* | |
623 | * Case-independent strcmp() function * | |
624 | *************************************************/ | |
625 | ||
626 | /* | |
627 | Arguments: | |
628 | s first string | |
629 | t second string | |
630 | ||
631 | Returns: < 0, = 0, or > 0, according to the comparison | |
632 | */ | |
633 | ||
634 | int | |
635 | strcmpic(uschar *s, uschar *t) | |
636 | { | |
637 | while (*s != 0) | |
638 | { | |
639 | int c = tolower(*s++) - tolower(*t++); | |
640 | if (c != 0) return c; | |
641 | } | |
642 | return *t; | |
643 | } | |
644 | ||
645 | ||
646 | /************************************************* | |
647 | * Case-independent strstr() function * | |
648 | *************************************************/ | |
649 | ||
650 | /* The third argument specifies whether whitespace is required | |
651 | to follow the matched string. | |
652 | ||
653 | Arguments: | |
654 | s string to search | |
655 | t substring to search for | |
656 | space_follows if TRUE, match only if whitespace follows | |
657 | ||
658 | Returns: pointer to substring in string, or NULL if not found | |
659 | */ | |
660 | ||
661 | uschar * | |
662 | strstric(uschar *s, uschar *t, BOOL space_follows) | |
663 | { | |
664 | uschar *p = t; | |
665 | uschar *yield = NULL; | |
666 | int cl = tolower(*p); | |
667 | int cu = toupper(*p); | |
668 | ||
669 | while (*s) | |
670 | { | |
671 | if (*s == cl || *s == cu) | |
672 | { | |
673 | if (yield == NULL) yield = s; | |
674 | if (*(++p) == 0) | |
675 | { | |
676 | if (!space_follows || s[1] == ' ' || s[1] == '\n' ) return yield; | |
677 | yield = NULL; | |
678 | p = t; | |
679 | } | |
680 | cl = tolower(*p); | |
681 | cu = toupper(*p); | |
682 | s++; | |
683 | } | |
684 | else if (yield != NULL) | |
685 | { | |
686 | yield = NULL; | |
687 | p = t; | |
688 | cl = tolower(*p); | |
689 | cu = toupper(*p); | |
690 | } | |
691 | else s++; | |
692 | } | |
693 | return NULL; | |
694 | } | |
695 | ||
696 | ||
697 | ||
698 | #ifndef COMPILE_UTILITY | |
699 | /************************************************* | |
700 | * Get next string from separated list * | |
701 | *************************************************/ | |
702 | ||
703 | /* Leading and trailing space is removed from each item. The separator in the | |
704 | list is controlled by the int pointed to by the separator argument as follows: | |
705 | ||
706 | If its value is > 0 it is used as the delimiter. | |
707 | (If its value is actually > UCHAR_MAX there is only one item in the list. | |
708 | This is used for some cases when called via functions that sometimes | |
709 | plough through lists, and sometimes are given single items.) | |
710 | If its value is <= 0, the string is inspected for a leading <x, where | |
711 | x is an ispunct() value. If found, it is used as the delimiter. If not | |
712 | found: (a) if separator == 0, ':' is used | |
713 | (b) if separator <0, then -separator is used | |
714 | In all cases the value of the separator that is used is written back to | |
715 | the int so that it is used on subsequent calls as we progress through | |
716 | the list. | |
717 | ||
718 | The separator can always be represented in the string by doubling. | |
719 | ||
720 | Arguments: | |
721 | listptr points to a pointer to the current start of the list; the | |
722 | pointer gets updated to point after the end of the next item | |
723 | separator a pointer to the separator character in an int (see above) | |
724 | buffer where to put a copy of the next string in the list; or | |
725 | NULL if the next string is returned in new memory | |
726 | buflen when buffer is not NULL, the size of buffer; otherwise ignored | |
727 | ||
728 | Returns: pointer to buffer, containing the next substring, | |
729 | or NULL if no more substrings | |
730 | */ | |
731 | ||
732 | uschar * | |
733 | string_nextinlist(uschar **listptr, int *separator, uschar *buffer, int buflen) | |
734 | { | |
735 | register int p = 0; | |
736 | register int sep = *separator; | |
737 | register uschar *s = *listptr; | |
738 | ||
739 | if (s == NULL) return NULL; | |
740 | while (isspace(*s)) s++; | |
741 | ||
742 | if (sep <= 0) | |
743 | { | |
744 | if (*s == '<' && ispunct(s[1])) | |
745 | { | |
746 | sep = s[1]; | |
747 | s += 2; | |
748 | while (isspace(*s)) s++; | |
749 | } | |
750 | else | |
751 | { | |
752 | sep = (sep == 0)? ':' : -sep; | |
753 | } | |
754 | *separator = sep; | |
755 | } | |
756 | ||
757 | if (*s == 0) return NULL; | |
758 | ||
759 | /* Handle the case when a buffer is provided. */ | |
760 | ||
761 | if (buffer != NULL) | |
762 | { | |
763 | for (; *s != 0; s++) | |
764 | { | |
765 | if (*s == sep && *(++s) != sep) break; | |
766 | if (p < buflen - 1) buffer[p++] = *s; | |
767 | } | |
768 | while (p > 0 && isspace(buffer[p-1])) p--; | |
769 | buffer[p] = 0; | |
770 | } | |
771 | ||
772 | /* Handle the case when a buffer is not provided. */ | |
773 | ||
774 | else | |
775 | { | |
776 | /* We know that *s != 0 at this point. However, it might be pointing to a | |
777 | separator, which could indicate an empty string, or could be doubled to | |
778 | indicate a separator character as data at the start of a string. */ | |
779 | ||
780 | if (*s == sep) | |
781 | { | |
782 | s++; | |
783 | if (*s != sep) buffer = string_copy(US""); | |
784 | } | |
785 | ||
786 | if (buffer == NULL) | |
787 | { | |
788 | int size = 0; | |
789 | int ptr = 0; | |
790 | uschar *ss; | |
791 | for (;;) | |
792 | { | |
793 | for (ss = s + 1; *ss != 0 && *ss != sep; ss++); | |
794 | buffer = string_cat(buffer, &size, &ptr, s, ss-s); | |
795 | s = ss; | |
796 | if (*s == 0 || *(++s) != sep) break; | |
797 | } | |
798 | while (ptr > 0 && isspace(buffer[ptr-1])) ptr--; | |
799 | buffer[ptr] = 0; | |
800 | } | |
801 | } | |
802 | ||
803 | /* Update the current pointer and return the new string */ | |
804 | ||
805 | *listptr = s; | |
806 | return buffer; | |
807 | } | |
808 | #endif /* COMPILE_UTILITY */ | |
809 | ||
810 | ||
811 | ||
812 | #ifndef COMPILE_UTILITY | |
813 | /************************************************* | |
814 | * Add chars to string * | |
815 | *************************************************/ | |
816 | ||
817 | /* This function is used when building up strings of unknown length. Room is | |
818 | always left for a terminating zero to be added to the string that is being | |
819 | built. This function does not require the string that is being added to be NUL | |
820 | terminated, because the number of characters to add is given explicitly. It is | |
821 | sometimes called to extract parts of other strings. | |
822 | ||
823 | Arguments: | |
824 | string points to the start of the string that is being built, or NULL | |
825 | if this is a new string that has no contents yet | |
826 | size points to a variable that holds the current capacity of the memory | |
827 | block (updated if changed) | |
828 | ptr points to a variable that holds the offset at which to add | |
829 | characters, updated to the new offset | |
830 | s points to characters to add | |
831 | count count of characters to add; must not exceed the length of s, if s | |
832 | is a C string | |
833 | ||
834 | If string is given as NULL, *size and *ptr should both be zero. | |
835 | ||
836 | Returns: pointer to the start of the string, changed if copied for expansion. | |
837 | Note that a NUL is not added, though space is left for one. This is | |
838 | because string_cat() is often called multiple times to build up a | |
839 | string - there's no point adding the NUL till the end. | |
840 | */ | |
841 | ||
842 | uschar * | |
843 | string_cat(uschar *string, int *size, int *ptr, const uschar *s, int count) | |
844 | { | |
845 | int p = *ptr; | |
846 | ||
847 | if (p + count >= *size) | |
848 | { | |
849 | int oldsize = *size; | |
850 | ||
851 | /* Mostly, string_cat() is used to build small strings of a few hundred | |
852 | characters at most. There are times, however, when the strings are very much | |
853 | longer (for example, a lookup that returns a vast number of alias addresses). | |
854 | To try to keep things reasonable, we use increments whose size depends on the | |
855 | existing length of the string. */ | |
856 | ||
857 | int inc = (oldsize < 4096)? 100 : 1024; | |
858 | while (*size <= p + count) *size += inc; | |
859 | ||
860 | /* New string */ | |
861 | ||
862 | if (string == NULL) string = store_get(*size); | |
863 | ||
864 | /* Try to extend an existing allocation. If the result of calling | |
865 | store_extend() is false, either there isn't room in the current memory block, | |
866 | or this string is not the top item on the dynamic store stack. We then have | |
867 | to get a new chunk of store and copy the old string. When building large | |
868 | strings, it is helpful to call store_release() on the old string, to release | |
869 | memory blocks that have become empty. (The block will be freed if the string | |
870 | is at its start.) However, we can do this only if we know that the old string | |
871 | was the last item on the dynamic memory stack. This is the case if it matches | |
872 | store_last_get. */ | |
873 | ||
874 | else if (!store_extend(string, oldsize, *size)) | |
875 | { | |
876 | BOOL release_ok = store_last_get[store_pool] == string; | |
877 | uschar *newstring = store_get(*size); | |
878 | memcpy(newstring, string, p); | |
879 | if (release_ok) store_release(string); | |
880 | string = newstring; | |
881 | } | |
882 | } | |
883 | ||
884 | /* Because we always specify the exact number of characters to copy, we can | |
885 | use memcpy(), which is likely to be more efficient than strncopy() because the | |
886 | latter has to check for zero bytes. */ | |
887 | ||
888 | memcpy(string + p, s, count); | |
889 | *ptr = p + count; | |
890 | return string; | |
891 | } | |
892 | #endif /* COMPILE_UTILITY */ | |
893 | ||
894 | ||
895 | ||
896 | #ifndef COMPILE_UTILITY | |
897 | /************************************************* | |
898 | * Append strings to another string * | |
899 | *************************************************/ | |
900 | ||
901 | /* This function can be used to build a string from many other strings. | |
902 | It calls string_cat() to do the dirty work. | |
903 | ||
904 | Arguments: | |
905 | string points to the start of the string that is being built, or NULL | |
906 | if this is a new string that has no contents yet | |
907 | size points to a variable that holds the current capacity of the memory | |
908 | block (updated if changed) | |
909 | ptr points to a variable that holds the offset at which to add | |
910 | characters, updated to the new offset | |
911 | count the number of strings to append | |
912 | ... "count" uschar* arguments, which must be valid zero-terminated | |
913 | C strings | |
914 | ||
915 | Returns: pointer to the start of the string, changed if copied for expansion. | |
916 | The string is not zero-terminated - see string_cat() above. | |
917 | */ | |
918 | ||
919 | uschar * | |
920 | string_append(uschar *string, int *size, int *ptr, int count, ...) | |
921 | { | |
922 | va_list ap; | |
923 | int i; | |
924 | ||
925 | va_start(ap, count); | |
926 | for (i = 0; i < count; i++) | |
927 | { | |
928 | uschar *t = va_arg(ap, uschar *); | |
929 | string = string_cat(string, size, ptr, t, Ustrlen(t)); | |
930 | } | |
931 | va_end(ap); | |
932 | ||
933 | return string; | |
934 | } | |
935 | #endif | |
936 | ||
937 | ||
938 | ||
939 | /************************************************* | |
940 | * Format a string with length checks * | |
941 | *************************************************/ | |
942 | ||
943 | /* This function is used to format a string with checking of the length of the | |
944 | output for all conversions. It protects Exim from absent-mindedness when | |
945 | calling functions like debug_printf and string_sprintf, and elsewhere. There | |
946 | are two different entry points to what is actually the same function, depending | |
947 | on whether the variable length list of data arguments are given explicitly or | |
948 | as a va_list item. | |
949 | ||
950 | The formats are the usual printf() ones, with some omissions (never used) and | |
0d7eb84a PH |
951 | two additions for strings: %S forces lower case, and %#s or %#S prints nothing |
952 | for a NULL string. Without the # "NULL" is printed (useful in debugging). There | |
953 | is also the addition of %D, which inserts the date in the form used for | |
059ec3d9 PH |
954 | datestamped log files. |
955 | ||
956 | Arguments: | |
957 | buffer a buffer in which to put the formatted string | |
958 | buflen the length of the buffer | |
959 | format the format string - deliberately char * and not uschar * | |
960 | ... or ap variable list of supplementary arguments | |
961 | ||
962 | Returns: TRUE if the result fitted in the buffer | |
963 | */ | |
964 | ||
965 | BOOL | |
966 | string_format(uschar *buffer, int buflen, char *format, ...) | |
967 | { | |
968 | BOOL yield; | |
969 | va_list ap; | |
970 | va_start(ap, format); | |
971 | yield = string_vformat(buffer, buflen, format, ap); | |
972 | va_end(ap); | |
973 | return yield; | |
974 | } | |
975 | ||
976 | ||
977 | BOOL | |
978 | string_vformat(uschar *buffer, int buflen, char *format, va_list ap) | |
979 | { | |
b1c749bb PH |
980 | enum { L_NORMAL, L_SHORT, L_LONG, L_LONGLONG, L_LONGDOUBLE }; |
981 | ||
059ec3d9 PH |
982 | BOOL yield = TRUE; |
983 | int width, precision; | |
984 | char *fp = format; /* Deliberately not unsigned */ | |
985 | uschar *p = buffer; | |
986 | uschar *last = buffer + buflen - 1; | |
987 | ||
988 | string_datestamp_offset = -1; /* Datestamp not inserted */ | |
989 | ||
990 | /* Scan the format and handle the insertions */ | |
991 | ||
992 | while (*fp != 0) | |
993 | { | |
b1c749bb | 994 | int length = L_NORMAL; |
059ec3d9 PH |
995 | int *nptr; |
996 | int slen; | |
997 | char *null = "NULL"; /* ) These variables */ | |
998 | char *item_start, *s; /* ) are deliberately */ | |
999 | char newformat[16]; /* ) not unsigned */ | |
1000 | ||
1001 | /* Non-% characters just get copied verbatim */ | |
1002 | ||
1003 | if (*fp != '%') | |
1004 | { | |
1005 | if (p >= last) { yield = FALSE; break; } | |
1006 | *p++ = (uschar)*fp++; | |
1007 | continue; | |
1008 | } | |
1009 | ||
1010 | /* Deal with % characters. Pick off the width and precision, for checking | |
1011 | strings, skipping over the flag and modifier characters. */ | |
1012 | ||
1013 | item_start = fp; | |
1014 | width = precision = -1; | |
1015 | ||
1016 | if (strchr("-+ #0", *(++fp)) != NULL) | |
1017 | { | |
1018 | if (*fp == '#') null = ""; | |
1019 | fp++; | |
1020 | } | |
1021 | ||
1022 | if (isdigit((uschar)*fp)) | |
1023 | { | |
1024 | width = *fp++ - '0'; | |
1025 | while (isdigit((uschar)*fp)) width = width * 10 + *fp++ - '0'; | |
1026 | } | |
1027 | else if (*fp == '*') | |
1028 | { | |
1029 | width = va_arg(ap, int); | |
1030 | fp++; | |
1031 | } | |
1032 | ||
1033 | if (*fp == '.') | |
1034 | { | |
1035 | if (*(++fp) == '*') | |
1036 | { | |
1037 | precision = va_arg(ap, int); | |
1038 | fp++; | |
1039 | } | |
1040 | else | |
1041 | { | |
1042 | precision = 0; | |
1043 | while (isdigit((uschar)*fp)) | |
1044 | precision = precision*10 + *fp++ - '0'; | |
1045 | } | |
1046 | } | |
1047 | ||
b1c749bb PH |
1048 | /* Skip over 'h', 'L', 'l', and 'll', remembering the item length */ |
1049 | ||
1050 | if (*fp == 'h') | |
1051 | { fp++; length = L_SHORT; } | |
1052 | else if (*fp == 'L') | |
1053 | { fp++; length = L_LONGDOUBLE; } | |
1054 | else if (*fp == 'l') | |
1055 | { | |
1056 | if (fp[1] == 'l') | |
1057 | { | |
1058 | fp += 2; | |
1059 | length = L_LONGLONG; | |
1060 | } | |
1061 | else | |
1062 | { | |
1063 | fp++; | |
1064 | length = L_LONG; | |
1065 | } | |
1066 | } | |
059ec3d9 PH |
1067 | |
1068 | /* Handle each specific format type. */ | |
1069 | ||
1070 | switch (*fp++) | |
1071 | { | |
1072 | case 'n': | |
1073 | nptr = va_arg(ap, int *); | |
1074 | *nptr = p - buffer; | |
1075 | break; | |
1076 | ||
1077 | case 'd': | |
1078 | case 'o': | |
1079 | case 'u': | |
1080 | case 'x': | |
1081 | case 'X': | |
1549ea3b PH |
1082 | if (p >= last - ((length > L_LONG)? 24 : 12)) |
1083 | { yield = FALSE; goto END_FORMAT; } | |
059ec3d9 PH |
1084 | strncpy(newformat, item_start, fp - item_start); |
1085 | newformat[fp - item_start] = 0; | |
b1c749bb PH |
1086 | |
1087 | /* Short int is promoted to int when passing through ..., so we must use | |
1088 | int for va_arg(). */ | |
1089 | ||
1090 | switch(length) | |
1091 | { | |
1092 | case L_SHORT: | |
1093 | case L_NORMAL: sprintf(CS p, newformat, va_arg(ap, int)); break; | |
1094 | case L_LONG: sprintf(CS p, newformat, va_arg(ap, long int)); break; | |
c6c2dc1d | 1095 | case L_LONGLONG: sprintf(CS p, newformat, va_arg(ap, LONGLONG_T)); break; |
b1c749bb | 1096 | } |
059ec3d9 PH |
1097 | while (*p) p++; |
1098 | break; | |
1099 | ||
1100 | case 'p': | |
1101 | if (p >= last - 24) { yield = FALSE; goto END_FORMAT; } | |
1102 | strncpy(newformat, item_start, fp - item_start); | |
1103 | newformat[fp - item_start] = 0; | |
1104 | sprintf(CS p, newformat, va_arg(ap, void *)); | |
1105 | while (*p) p++; | |
1106 | break; | |
1107 | ||
1108 | /* %f format is inherently insecure if the numbers that it may be | |
870f6ba8 TF |
1109 | handed are unknown (e.g. 1e300). However, in Exim, %f is used for |
1110 | printing load averages, and these are actually stored as integers | |
1111 | (load average * 1000) so the size of the numbers is constrained. | |
1112 | It is also used for formatting sending rates, where the simplicity | |
1113 | of the format prevents overflow. */ | |
059ec3d9 PH |
1114 | |
1115 | case 'f': | |
1116 | case 'e': | |
1117 | case 'E': | |
1118 | case 'g': | |
1119 | case 'G': | |
1120 | if (precision < 0) precision = 6; | |
1121 | if (p >= last - precision - 8) { yield = FALSE; goto END_FORMAT; } | |
1122 | strncpy(newformat, item_start, fp - item_start); | |
1123 | newformat[fp-item_start] = 0; | |
b1c749bb PH |
1124 | if (length == L_LONGDOUBLE) |
1125 | sprintf(CS p, newformat, va_arg(ap, long double)); | |
1126 | else | |
1127 | sprintf(CS p, newformat, va_arg(ap, double)); | |
059ec3d9 PH |
1128 | while (*p) p++; |
1129 | break; | |
1130 | ||
1131 | /* String types */ | |
1132 | ||
1133 | case '%': | |
1134 | if (p >= last) { yield = FALSE; goto END_FORMAT; } | |
1135 | *p++ = '%'; | |
1136 | break; | |
1137 | ||
1138 | case 'c': | |
1139 | if (p >= last) { yield = FALSE; goto END_FORMAT; } | |
1140 | *p++ = va_arg(ap, int); | |
1141 | break; | |
1142 | ||
1143 | case 'D': /* Insert datestamp for log file names */ | |
1144 | s = CS tod_stamp(tod_log_datestamp); | |
1145 | string_datestamp_offset = p - buffer; /* Passed back via global */ | |
1146 | goto INSERT_STRING; | |
1147 | ||
1148 | case 's': | |
1149 | case 'S': /* Forces *lower* case */ | |
1150 | s = va_arg(ap, char *); | |
1151 | ||
1152 | INSERT_STRING: /* Come to from %D above */ | |
1153 | if (s == NULL) s = null; | |
1154 | slen = Ustrlen(s); | |
1155 | ||
1156 | /* If the width is specified, check that there is a precision | |
1157 | set; if not, set it to the width to prevent overruns of long | |
1158 | strings. */ | |
1159 | ||
1160 | if (width >= 0) | |
1161 | { | |
1162 | if (precision < 0) precision = width; | |
1163 | } | |
1164 | ||
1165 | /* If a width is not specified and the precision is specified, set | |
1166 | the width to the precision, or the string length if shorted. */ | |
1167 | ||
1168 | else if (precision >= 0) | |
1169 | { | |
1170 | width = (precision < slen)? precision : slen; | |
1171 | } | |
1172 | ||
1173 | /* If neither are specified, set them both to the string length. */ | |
1174 | ||
1175 | else width = precision = slen; | |
1176 | ||
1177 | /* Check string space, and add the string to the buffer if ok. If | |
1178 | not OK, add part of the string (debugging uses this to show as | |
1179 | much as possible). */ | |
1180 | ||
1181 | if (p >= last - width) | |
1182 | { | |
1183 | yield = FALSE; | |
1184 | width = precision = last - p - 1; | |
1185 | } | |
1186 | sprintf(CS p, "%*.*s", width, precision, s); | |
1187 | if (fp[-1] == 'S') | |
1188 | while (*p) { *p = tolower(*p); p++; } | |
1189 | else | |
1190 | while (*p) p++; | |
1191 | if (!yield) goto END_FORMAT; | |
1192 | break; | |
1193 | ||
1194 | /* Some things are never used in Exim; also catches junk. */ | |
1195 | ||
1196 | default: | |
1197 | strncpy(newformat, item_start, fp - item_start); | |
1198 | newformat[fp-item_start] = 0; | |
1199 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "string_format: unsupported type " | |
1200 | "in \"%s\" in \"%s\"", newformat, format); | |
1201 | break; | |
1202 | } | |
1203 | } | |
1204 | ||
1205 | /* Ensure string is complete; return TRUE if got to the end of the format */ | |
1206 | ||
1207 | END_FORMAT: | |
1208 | ||
1209 | *p = 0; | |
1210 | return yield; | |
1211 | } | |
1212 | ||
1213 | ||
1214 | ||
1215 | #ifndef COMPILE_UTILITY | |
1216 | /************************************************* | |
1217 | * Generate an "open failed" message * | |
1218 | *************************************************/ | |
1219 | ||
1220 | /* This function creates a message after failure to open a file. It includes a | |
1221 | string supplied as data, adds the strerror() text, and if the failure was | |
1222 | "Permission denied", reads and includes the euid and egid. | |
1223 | ||
1224 | Arguments: | |
1225 | eno the value of errno after the failure | |
1226 | format a text format string - deliberately not uschar * | |
1227 | ... arguments for the format string | |
1228 | ||
1229 | Returns: a message, in dynamic store | |
1230 | */ | |
1231 | ||
1232 | uschar * | |
1233 | string_open_failed(int eno, char *format, ...) | |
1234 | { | |
1235 | va_list ap; | |
1236 | uschar buffer[1024]; | |
1237 | ||
1238 | Ustrcpy(buffer, "failed to open "); | |
1239 | va_start(ap, format); | |
1240 | ||
1241 | /* Use the checked formatting routine to ensure that the buffer | |
1242 | does not overflow. It should not, since this is called only for internally | |
1243 | specified messages. If it does, the message just gets truncated, and there | |
1244 | doesn't seem much we can do about that. */ | |
1245 | ||
1246 | (void)string_vformat(buffer+15, sizeof(buffer) - 15, format, ap); | |
1247 | ||
1248 | return (eno == EACCES)? | |
1249 | string_sprintf("%s: %s (euid=%ld egid=%ld)", buffer, strerror(eno), | |
1250 | (long int)geteuid(), (long int)getegid()) : | |
1251 | string_sprintf("%s: %s", buffer, strerror(eno)); | |
1252 | } | |
1253 | #endif /* COMPILE_UTILITY */ | |
1254 | ||
1255 | ||
1256 | ||
1257 | #ifndef COMPILE_UTILITY | |
1258 | /************************************************* | |
1259 | * Generate local prt for logging * | |
1260 | *************************************************/ | |
1261 | ||
1262 | /* This function is a subroutine for use in string_log_address() below. | |
1263 | ||
1264 | Arguments: | |
1265 | addr the address being logged | |
1266 | yield the current dynamic buffer pointer | |
1267 | sizeptr points to current size | |
1268 | ptrptr points to current insert pointer | |
1269 | ||
1270 | Returns: the new value of the buffer pointer | |
1271 | */ | |
1272 | ||
1273 | static uschar * | |
1274 | string_get_localpart(address_item *addr, uschar *yield, int *sizeptr, | |
1275 | int *ptrptr) | |
1276 | { | |
1277 | if (testflag(addr, af_include_affixes) && addr->prefix != NULL) | |
1278 | yield = string_cat(yield, sizeptr, ptrptr, addr->prefix, | |
1279 | Ustrlen(addr->prefix)); | |
1280 | yield = string_cat(yield, sizeptr, ptrptr, addr->local_part, | |
1281 | Ustrlen(addr->local_part)); | |
1282 | if (testflag(addr, af_include_affixes) && addr->suffix != NULL) | |
1283 | yield = string_cat(yield, sizeptr, ptrptr, addr->suffix, | |
1284 | Ustrlen(addr->suffix)); | |
1285 | return yield; | |
1286 | } | |
1287 | ||
1288 | ||
1289 | /************************************************* | |
1290 | * Generate log address list * | |
1291 | *************************************************/ | |
1292 | ||
1293 | /* This function generates a list consisting of an address and its parents, for | |
1294 | use in logging lines. For saved onetime aliased addresses, the onetime parent | |
1295 | field is used. If the address was delivered by a transport with rcpt_include_ | |
1296 | affixes set, the af_include_affixes bit will be set in the address. In that | |
1297 | case, we include the affixes here too. | |
1298 | ||
1299 | Arguments: | |
1300 | addr bottom (ultimate) address | |
1301 | all_parents if TRUE, include all parents | |
1302 | success TRUE for successful delivery | |
1303 | ||
1304 | Returns: a string in dynamic store | |
1305 | */ | |
1306 | ||
1307 | uschar * | |
1308 | string_log_address(address_item *addr, BOOL all_parents, BOOL success) | |
1309 | { | |
1310 | int size = 64; | |
1311 | int ptr = 0; | |
1312 | BOOL add_topaddr = TRUE; | |
1313 | uschar *yield = store_get(size); | |
1314 | address_item *topaddr; | |
1315 | ||
1316 | /* Find the ultimate parent */ | |
1317 | ||
1318 | for (topaddr = addr; topaddr->parent != NULL; topaddr = topaddr->parent); | |
1319 | ||
1320 | /* We start with just the local part for pipe, file, and reply deliveries, and | |
1321 | for successful local deliveries from routers that have the log_as_local flag | |
1322 | set. File deliveries from filters can be specified as non-absolute paths in | |
1323 | cases where the transport is goin to complete the path. If there is an error | |
1324 | before this happens (expansion failure) the local part will not be updated, and | |
1325 | so won't necessarily look like a path. Add extra text for this case. */ | |
1326 | ||
1327 | if (testflag(addr, af_pfr) || | |
1328 | (success && | |
1329 | addr->router != NULL && addr->router->log_as_local && | |
1330 | addr->transport != NULL && addr->transport->info->local)) | |
1331 | { | |
1332 | if (testflag(addr, af_file) && addr->local_part[0] != '/') | |
1333 | yield = string_cat(yield, &size, &ptr, CUS"save ", 5); | |
1334 | yield = string_get_localpart(addr, yield, &size, &ptr); | |
1335 | } | |
1336 | ||
1337 | /* Other deliveries start with the full address. It we have split it into local | |
1338 | part and domain, use those fields. Some early failures can happen before the | |
1339 | splitting is done; in those cases use the original field. */ | |
1340 | ||
1341 | else | |
1342 | { | |
1343 | if (addr->local_part != NULL) | |
1344 | { | |
1345 | yield = string_get_localpart(addr, yield, &size, &ptr); | |
1346 | yield = string_cat(yield, &size, &ptr, US"@", 1); | |
1347 | yield = string_cat(yield, &size, &ptr, addr->domain, | |
1348 | Ustrlen(addr->domain) ); | |
1349 | } | |
1350 | else | |
1351 | { | |
1352 | yield = string_cat(yield, &size, &ptr, addr->address, Ustrlen(addr->address)); | |
1353 | } | |
1354 | yield[ptr] = 0; | |
1355 | ||
1356 | /* If the address we are going to print is the same as the top address, | |
1357 | and all parents are not being included, don't add on the top address. First | |
1358 | of all, do a caseless comparison; if this succeeds, do a caseful comparison | |
1359 | on the local parts. */ | |
1360 | ||
1361 | if (strcmpic(yield, topaddr->address) == 0 && | |
1362 | Ustrncmp(yield, topaddr->address, Ustrchr(yield, '@') - yield) == 0 && | |
1363 | addr->onetime_parent == NULL && | |
1364 | (!all_parents || addr->parent == NULL || addr->parent == topaddr)) | |
1365 | add_topaddr = FALSE; | |
1366 | } | |
1367 | ||
1368 | /* If all parents are requested, or this is a local pipe/file/reply, and | |
1369 | there is at least one intermediate parent, show it in brackets, and continue | |
1370 | with all of them if all are wanted. */ | |
1371 | ||
1372 | if ((all_parents || testflag(addr, af_pfr)) && | |
1373 | addr->parent != NULL && | |
1374 | addr->parent != topaddr) | |
1375 | { | |
1376 | uschar *s = US" ("; | |
1377 | address_item *addr2; | |
1378 | for (addr2 = addr->parent; addr2 != topaddr; addr2 = addr2->parent) | |
1379 | { | |
1380 | yield = string_cat(yield, &size, &ptr, s, 2); | |
1381 | yield = string_cat(yield, &size, &ptr, addr2->address, Ustrlen(addr2->address)); | |
1382 | if (!all_parents) break; | |
1383 | s = US", "; | |
1384 | } | |
1385 | yield = string_cat(yield, &size, &ptr, US")", 1); | |
1386 | } | |
1387 | ||
1388 | /* Add the top address if it is required */ | |
1389 | ||
1390 | if (add_topaddr) | |
1391 | { | |
1392 | yield = string_cat(yield, &size, &ptr, US" <", 2); | |
1393 | ||
1394 | if (addr->onetime_parent == NULL) | |
1395 | yield = string_cat(yield, &size, &ptr, topaddr->address, | |
1396 | Ustrlen(topaddr->address)); | |
1397 | else | |
1398 | yield = string_cat(yield, &size, &ptr, addr->onetime_parent, | |
1399 | Ustrlen(addr->onetime_parent)); | |
1400 | ||
1401 | yield = string_cat(yield, &size, &ptr, US">", 1); | |
1402 | } | |
1403 | ||
1404 | yield[ptr] = 0; /* string_cat() leaves space */ | |
1405 | return yield; | |
1406 | } | |
1407 | #endif /* COMPILE_UTILITY */ | |
1408 | ||
1409 | ||
1410 | ||
1411 | ||
1412 | ||
1413 | /************************************************* | |
1414 | ************************************************** | |
1415 | * Stand-alone test program * | |
1416 | ************************************************** | |
1417 | *************************************************/ | |
1418 | ||
1419 | #ifdef STAND_ALONE | |
1420 | int main(void) | |
1421 | { | |
1422 | uschar buffer[256]; | |
1423 | ||
1424 | printf("Testing is_ip_address\n"); | |
1425 | ||
1426 | while (fgets(CS buffer, sizeof(buffer), stdin) != NULL) | |
1427 | { | |
1428 | int offset; | |
1429 | buffer[Ustrlen(buffer) - 1] = 0; | |
1430 | printf("%d\n", string_is_ip_address(buffer, NULL)); | |
1431 | printf("%d %d %s\n", string_is_ip_address(buffer, &offset), offset, buffer); | |
1432 | } | |
1433 | ||
1434 | printf("Testing string_nextinlist\n"); | |
1435 | ||
1436 | while (fgets(CS buffer, sizeof(buffer), stdin) != NULL) | |
1437 | { | |
1438 | uschar *list = buffer; | |
1439 | uschar *lp1, *lp2; | |
1440 | uschar item[256]; | |
1441 | int sep1 = 0; | |
1442 | int sep2 = 0; | |
1443 | ||
1444 | if (*list == '<') | |
1445 | { | |
1446 | sep1 = sep2 = list[1]; | |
1447 | list += 2; | |
1448 | } | |
1449 | ||
1450 | lp1 = lp2 = list; | |
1451 | for (;;) | |
1452 | { | |
1453 | uschar *item1 = string_nextinlist(&lp1, &sep1, item, sizeof(item)); | |
1454 | uschar *item2 = string_nextinlist(&lp2, &sep2, NULL, 0); | |
1455 | ||
1456 | if (item1 == NULL && item2 == NULL) break; | |
1457 | if (item == NULL || item2 == NULL || Ustrcmp(item1, item2) != 0) | |
1458 | { | |
1459 | printf("***ERROR\nitem1=\"%s\"\nitem2=\"%s\"\n", | |
1460 | (item1 == NULL)? "NULL" : CS item1, | |
1461 | (item2 == NULL)? "NULL" : CS item2); | |
1462 | break; | |
1463 | } | |
1464 | else printf(" \"%s\"\n", CS item1); | |
1465 | } | |
1466 | } | |
1467 | ||
1468 | /* This is a horrible lash-up, but it serves its purpose. */ | |
1469 | ||
1470 | printf("Testing string_format\n"); | |
1471 | ||
1472 | while (fgets(CS buffer, sizeof(buffer), stdin) != NULL) | |
1473 | { | |
1474 | void *args[3]; | |
ed72ace5 | 1475 | long long llargs[3]; |
059ec3d9 PH |
1476 | double dargs[3]; |
1477 | int dflag = 0; | |
ed72ace5 | 1478 | int llflag = 0; |
059ec3d9 PH |
1479 | int n = 0; |
1480 | int count; | |
1481 | int countset = 0; | |
1482 | uschar format[256]; | |
1483 | uschar outbuf[256]; | |
1484 | uschar *s; | |
1485 | buffer[Ustrlen(buffer) - 1] = 0; | |
1486 | ||
1487 | s = Ustrchr(buffer, ','); | |
1488 | if (s == NULL) s = buffer + Ustrlen(buffer); | |
1489 | ||
1490 | Ustrncpy(format, buffer, s - buffer); | |
1491 | format[s-buffer] = 0; | |
1492 | ||
1493 | if (*s == ',') s++; | |
1494 | ||
1495 | while (*s != 0) | |
1496 | { | |
1497 | uschar *ss = s; | |
1498 | s = Ustrchr(ss, ','); | |
1499 | if (s == NULL) s = ss + Ustrlen(ss); | |
1500 | ||
1501 | if (isdigit(*ss)) | |
1502 | { | |
1503 | Ustrncpy(outbuf, ss, s-ss); | |
1504 | if (Ustrchr(outbuf, '.') != NULL) | |
1505 | { | |
1506 | dflag = 1; | |
1507 | dargs[n++] = Ustrtod(outbuf, NULL); | |
1508 | } | |
ed72ace5 PH |
1509 | else if (Ustrstr(outbuf, "ll") != NULL) |
1510 | { | |
1511 | llflag = 1; | |
1512 | llargs[n++] = strtoull(CS outbuf, NULL, 10); | |
1513 | } | |
059ec3d9 PH |
1514 | else |
1515 | { | |
1516 | args[n++] = (void *)Uatoi(outbuf); | |
1517 | } | |
1518 | } | |
1519 | ||
1520 | else if (Ustrcmp(ss, "*") == 0) | |
1521 | { | |
1522 | args[n++] = (void *)(&count); | |
1523 | countset = 1; | |
1524 | } | |
1525 | ||
1526 | else | |
1527 | { | |
1528 | uschar *sss = malloc(s - ss + 1); | |
1529 | Ustrncpy(sss, ss, s-ss); | |
1530 | args[n++] = sss; | |
1531 | } | |
1532 | ||
1533 | if (*s == ',') s++; | |
1534 | } | |
1535 | ||
ed72ace5 PH |
1536 | if (!dflag && !llflag) |
1537 | printf("%s\n", string_format(outbuf, sizeof(outbuf), CS format, | |
1538 | args[0], args[1], args[2])? "True" : "False"); | |
1539 | ||
1540 | else if (dflag) | |
1541 | printf("%s\n", string_format(outbuf, sizeof(outbuf), CS format, | |
1542 | dargs[0], dargs[1], dargs[2])? "True" : "False"); | |
059ec3d9 PH |
1543 | |
1544 | else printf("%s\n", string_format(outbuf, sizeof(outbuf), CS format, | |
ed72ace5 | 1545 | llargs[0], llargs[1], llargs[2])? "True" : "False"); |
059ec3d9 PH |
1546 | |
1547 | printf("%s\n", CS outbuf); | |
1548 | if (countset) printf("count=%d\n", count); | |
1549 | } | |
1550 | ||
1551 | return 0; | |
1552 | } | |
1553 | #endif | |
1554 | ||
1555 | /* End of string.c */ |