Commit | Line | Data |
---|---|---|
059ec3d9 PH |
1 | /************************************************* |
2 | * Exim - an Internet mail transport agent * | |
3 | *************************************************/ | |
4 | ||
5a66c31b | 5 | /* Copyright (c) University of Cambridge 1995 - 2014 */ |
059ec3d9 PH |
6 | /* See the file NOTICE for conditions of use and distribution. */ |
7 | ||
8 | ||
9 | /* The main function: entry point, initialization, and high-level control. | |
10 | Also a few functions that don't naturally fit elsewhere. */ | |
11 | ||
12 | ||
13 | #include "exim.h" | |
14 | ||
6545de78 PP |
15 | extern void init_lookup_list(void); |
16 | ||
059ec3d9 PH |
17 | |
18 | ||
19 | /************************************************* | |
20 | * Function interface to store functions * | |
21 | *************************************************/ | |
22 | ||
23 | /* We need some real functions to pass to the PCRE regular expression library | |
24 | for store allocation via Exim's store manager. The normal calls are actually | |
25 | macros that pass over location information to make tracing easier. These | |
26 | functions just interface to the standard macro calls. A good compiler will | |
27 | optimize out the tail recursion and so not make them too expensive. There | |
28 | are two sets of functions; one for use when we want to retain the compiled | |
29 | regular expression for a long time; the other for short-term use. */ | |
30 | ||
31 | static void * | |
32 | function_store_get(size_t size) | |
33 | { | |
34 | return store_get((int)size); | |
35 | } | |
36 | ||
37 | static void | |
38 | function_dummy_free(void *block) { block = block; } | |
39 | ||
40 | static void * | |
41 | function_store_malloc(size_t size) | |
42 | { | |
43 | return store_malloc((int)size); | |
44 | } | |
45 | ||
46 | static void | |
47 | function_store_free(void *block) | |
48 | { | |
49 | store_free(block); | |
50 | } | |
51 | ||
52 | ||
53 | ||
54 | ||
98a90c36 PP |
55 | /************************************************* |
56 | * Enums for cmdline interface * | |
57 | *************************************************/ | |
58 | ||
59 | enum commandline_info { CMDINFO_NONE=0, | |
36a3ae5f | 60 | CMDINFO_HELP, CMDINFO_SIEVE, CMDINFO_DSCP }; |
98a90c36 PP |
61 | |
62 | ||
63 | ||
64 | ||
059ec3d9 PH |
65 | /************************************************* |
66 | * Compile regular expression and panic on fail * | |
67 | *************************************************/ | |
68 | ||
69 | /* This function is called when failure to compile a regular expression leads | |
70 | to a panic exit. In other cases, pcre_compile() is called directly. In many | |
71 | cases where this function is used, the results of the compilation are to be | |
72 | placed in long-lived store, so we temporarily reset the store management | |
73 | functions that PCRE uses if the use_malloc flag is set. | |
74 | ||
75 | Argument: | |
76 | pattern the pattern to compile | |
77 | caseless TRUE if caseless matching is required | |
78 | use_malloc TRUE if compile into malloc store | |
79 | ||
80 | Returns: pointer to the compiled pattern | |
81 | */ | |
82 | ||
83 | const pcre * | |
84 | regex_must_compile(uschar *pattern, BOOL caseless, BOOL use_malloc) | |
85 | { | |
86 | int offset; | |
87 | int options = PCRE_COPT; | |
88 | const pcre *yield; | |
89 | const uschar *error; | |
90 | if (use_malloc) | |
91 | { | |
92 | pcre_malloc = function_store_malloc; | |
93 | pcre_free = function_store_free; | |
94 | } | |
95 | if (caseless) options |= PCRE_CASELESS; | |
96 | yield = pcre_compile(CS pattern, options, (const char **)&error, &offset, NULL); | |
97 | pcre_malloc = function_store_get; | |
98 | pcre_free = function_dummy_free; | |
99 | if (yield == NULL) | |
100 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "regular expression error: " | |
101 | "%s at offset %d while compiling %s", error, offset, pattern); | |
102 | return yield; | |
103 | } | |
104 | ||
105 | ||
106 | ||
107 | ||
108 | /************************************************* | |
109 | * Execute regular expression and set strings * | |
110 | *************************************************/ | |
111 | ||
112 | /* This function runs a regular expression match, and sets up the pointers to | |
113 | the matched substrings. | |
114 | ||
115 | Arguments: | |
116 | re the compiled expression | |
117 | subject the subject string | |
118 | options additional PCRE options | |
119 | setup if < 0 do full setup | |
120 | if >= 0 setup from setup+1 onwards, | |
121 | excluding the full matched string | |
122 | ||
123 | Returns: TRUE or FALSE | |
124 | */ | |
125 | ||
126 | BOOL | |
127 | regex_match_and_setup(const pcre *re, uschar *subject, int options, int setup) | |
128 | { | |
129 | int ovector[3*(EXPAND_MAXN+1)]; | |
130 | int n = pcre_exec(re, NULL, CS subject, Ustrlen(subject), 0, | |
131 | PCRE_EOPT | options, ovector, sizeof(ovector)/sizeof(int)); | |
132 | BOOL yield = n >= 0; | |
133 | if (n == 0) n = EXPAND_MAXN + 1; | |
134 | if (yield) | |
135 | { | |
136 | int nn; | |
137 | expand_nmax = (setup < 0)? 0 : setup + 1; | |
138 | for (nn = (setup < 0)? 0 : 2; nn < n*2; nn += 2) | |
139 | { | |
140 | expand_nstring[expand_nmax] = subject + ovector[nn]; | |
141 | expand_nlength[expand_nmax++] = ovector[nn+1] - ovector[nn]; | |
142 | } | |
143 | expand_nmax--; | |
144 | } | |
145 | return yield; | |
146 | } | |
147 | ||
148 | ||
149 | ||
150 | ||
921b12ca TF |
151 | /************************************************* |
152 | * Set up processing details * | |
153 | *************************************************/ | |
154 | ||
155 | /* Save a text string for dumping when SIGUSR1 is received. | |
156 | Do checks for overruns. | |
157 | ||
158 | Arguments: format and arguments, as for printf() | |
159 | Returns: nothing | |
160 | */ | |
161 | ||
162 | void | |
163 | set_process_info(const char *format, ...) | |
164 | { | |
165 | int len; | |
166 | va_list ap; | |
167 | sprintf(CS process_info, "%5d ", (int)getpid()); | |
168 | len = Ustrlen(process_info); | |
169 | va_start(ap, format); | |
170 | if (!string_vformat(process_info + len, PROCESS_INFO_SIZE - len - 2, format, ap)) | |
171 | Ustrcpy(process_info + len, "**** string overflowed buffer ****"); | |
172 | len = Ustrlen(process_info); | |
173 | process_info[len+0] = '\n'; | |
174 | process_info[len+1] = '\0'; | |
175 | process_info_len = len + 1; | |
176 | DEBUG(D_process_info) debug_printf("set_process_info: %s", process_info); | |
177 | va_end(ap); | |
178 | } | |
179 | ||
180 | ||
181 | ||
182 | ||
059ec3d9 PH |
183 | /************************************************* |
184 | * Handler for SIGUSR1 * | |
185 | *************************************************/ | |
186 | ||
187 | /* SIGUSR1 causes any exim process to write to the process log details of | |
188 | what it is currently doing. It will only be used if the OS is capable of | |
189 | setting up a handler that causes automatic restarting of any system call | |
190 | that is in progress at the time. | |
191 | ||
921b12ca TF |
192 | This function takes care to be signal-safe. |
193 | ||
059ec3d9 PH |
194 | Argument: the signal number (SIGUSR1) |
195 | Returns: nothing | |
196 | */ | |
197 | ||
198 | static void | |
199 | usr1_handler(int sig) | |
200 | { | |
921b12ca TF |
201 | int fd; |
202 | ||
203 | os_restarting_signal(sig, usr1_handler); | |
204 | ||
205 | fd = Uopen(process_log_path, O_APPEND|O_WRONLY, LOG_MODE); | |
206 | if (fd < 0) | |
207 | { | |
208 | /* If we are already running as the Exim user, try to create it in the | |
209 | current process (assuming spool_directory exists). Otherwise, if we are | |
210 | root, do the creation in an exim:exim subprocess. */ | |
211 | ||
212 | int euid = geteuid(); | |
213 | if (euid == exim_uid) | |
214 | fd = Uopen(process_log_path, O_CREAT|O_APPEND|O_WRONLY, LOG_MODE); | |
215 | else if (euid == root_uid) | |
216 | fd = log_create_as_exim(process_log_path); | |
217 | } | |
218 | ||
219 | /* If we are neither exim nor root, or if we failed to create the log file, | |
220 | give up. There is not much useful we can do with errors, since we don't want | |
221 | to disrupt whatever is going on outside the signal handler. */ | |
222 | ||
223 | if (fd < 0) return; | |
224 | ||
1ac6b2e7 | 225 | {int dummy = write(fd, process_info, process_info_len); dummy = dummy; } |
921b12ca | 226 | (void)close(fd); |
059ec3d9 PH |
227 | } |
228 | ||
229 | ||
230 | ||
231 | /************************************************* | |
232 | * Timeout handler * | |
233 | *************************************************/ | |
234 | ||
235 | /* This handler is enabled most of the time that Exim is running. The handler | |
236 | doesn't actually get used unless alarm() has been called to set a timer, to | |
237 | place a time limit on a system call of some kind. When the handler is run, it | |
238 | re-enables itself. | |
239 | ||
240 | There are some other SIGALRM handlers that are used in special cases when more | |
241 | than just a flag setting is required; for example, when reading a message's | |
242 | input. These are normally set up in the code module that uses them, and the | |
243 | SIGALRM handler is reset to this one afterwards. | |
244 | ||
245 | Argument: the signal value (SIGALRM) | |
246 | Returns: nothing | |
247 | */ | |
248 | ||
249 | void | |
250 | sigalrm_handler(int sig) | |
251 | { | |
252 | sig = sig; /* Keep picky compilers happy */ | |
253 | sigalrm_seen = TRUE; | |
254 | os_non_restarting_signal(SIGALRM, sigalrm_handler); | |
255 | } | |
256 | ||
257 | ||
258 | ||
259 | /************************************************* | |
260 | * Sleep for a fractional time interval * | |
261 | *************************************************/ | |
262 | ||
263 | /* This function is called by millisleep() and exim_wait_tick() to wait for a | |
264 | period of time that may include a fraction of a second. The coding is somewhat | |
eb2c0248 PH |
265 | tedious. We do not expect setitimer() ever to fail, but if it does, the process |
266 | will wait for ever, so we panic in this instance. (There was a case of this | |
267 | when a bug in a function that calls milliwait() caused it to pass invalid data. | |
7086e875 | 268 | That's when I added the check. :-) |
059ec3d9 PH |
269 | |
270 | Argument: an itimerval structure containing the interval | |
271 | Returns: nothing | |
272 | */ | |
273 | ||
274 | static void | |
275 | milliwait(struct itimerval *itval) | |
276 | { | |
277 | sigset_t sigmask; | |
278 | sigset_t old_sigmask; | |
279 | (void)sigemptyset(&sigmask); /* Empty mask */ | |
280 | (void)sigaddset(&sigmask, SIGALRM); /* Add SIGALRM */ | |
281 | (void)sigprocmask(SIG_BLOCK, &sigmask, &old_sigmask); /* Block SIGALRM */ | |
7086e875 | 282 | if (setitimer(ITIMER_REAL, itval, NULL) < 0) /* Start timer */ |
eb2c0248 PH |
283 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, |
284 | "setitimer() failed: %s", strerror(errno)); | |
059ec3d9 PH |
285 | (void)sigfillset(&sigmask); /* All signals */ |
286 | (void)sigdelset(&sigmask, SIGALRM); /* Remove SIGALRM */ | |
287 | (void)sigsuspend(&sigmask); /* Until SIGALRM */ | |
288 | (void)sigprocmask(SIG_SETMASK, &old_sigmask, NULL); /* Restore mask */ | |
289 | } | |
290 | ||
291 | ||
292 | ||
293 | ||
294 | /************************************************* | |
295 | * Millisecond sleep function * | |
296 | *************************************************/ | |
297 | ||
298 | /* The basic sleep() function has a granularity of 1 second, which is too rough | |
299 | in some cases - for example, when using an increasing delay to slow down | |
300 | spammers. | |
301 | ||
302 | Argument: number of millseconds | |
303 | Returns: nothing | |
304 | */ | |
305 | ||
306 | void | |
307 | millisleep(int msec) | |
308 | { | |
309 | struct itimerval itval; | |
310 | itval.it_interval.tv_sec = 0; | |
311 | itval.it_interval.tv_usec = 0; | |
312 | itval.it_value.tv_sec = msec/1000; | |
313 | itval.it_value.tv_usec = (msec % 1000) * 1000; | |
314 | milliwait(&itval); | |
315 | } | |
316 | ||
317 | ||
318 | ||
319 | /************************************************* | |
320 | * Compare microsecond times * | |
321 | *************************************************/ | |
322 | ||
323 | /* | |
324 | Arguments: | |
325 | tv1 the first time | |
326 | tv2 the second time | |
327 | ||
328 | Returns: -1, 0, or +1 | |
329 | */ | |
330 | ||
331 | int | |
332 | exim_tvcmp(struct timeval *t1, struct timeval *t2) | |
333 | { | |
334 | if (t1->tv_sec > t2->tv_sec) return +1; | |
335 | if (t1->tv_sec < t2->tv_sec) return -1; | |
336 | if (t1->tv_usec > t2->tv_usec) return +1; | |
337 | if (t1->tv_usec < t2->tv_usec) return -1; | |
338 | return 0; | |
339 | } | |
340 | ||
341 | ||
342 | ||
343 | ||
344 | /************************************************* | |
345 | * Clock tick wait function * | |
346 | *************************************************/ | |
347 | ||
348 | /* Exim uses a time + a pid to generate a unique identifier in two places: its | |
349 | message IDs, and in file names for maildir deliveries. Because some OS now | |
350 | re-use pids within the same second, sub-second times are now being used. | |
351 | However, for absolute certaintly, we must ensure the clock has ticked before | |
352 | allowing the relevant process to complete. At the time of implementation of | |
353 | this code (February 2003), the speed of processors is such that the clock will | |
354 | invariably have ticked already by the time a process has done its job. This | |
355 | function prepares for the time when things are faster - and it also copes with | |
356 | clocks that go backwards. | |
357 | ||
358 | Arguments: | |
359 | then_tv A timeval which was used to create uniqueness; its usec field | |
360 | has been rounded down to the value of the resolution. | |
361 | We want to be sure the current time is greater than this. | |
362 | resolution The resolution that was used to divide the microseconds | |
363 | (1 for maildir, larger for message ids) | |
364 | ||
365 | Returns: nothing | |
366 | */ | |
367 | ||
368 | void | |
369 | exim_wait_tick(struct timeval *then_tv, int resolution) | |
370 | { | |
371 | struct timeval now_tv; | |
372 | long int now_true_usec; | |
373 | ||
374 | (void)gettimeofday(&now_tv, NULL); | |
375 | now_true_usec = now_tv.tv_usec; | |
376 | now_tv.tv_usec = (now_true_usec/resolution) * resolution; | |
377 | ||
378 | if (exim_tvcmp(&now_tv, then_tv) <= 0) | |
379 | { | |
380 | struct itimerval itval; | |
381 | itval.it_interval.tv_sec = 0; | |
382 | itval.it_interval.tv_usec = 0; | |
383 | itval.it_value.tv_sec = then_tv->tv_sec - now_tv.tv_sec; | |
384 | itval.it_value.tv_usec = then_tv->tv_usec + resolution - now_true_usec; | |
385 | ||
386 | /* We know that, overall, "now" is less than or equal to "then". Therefore, a | |
387 | negative value for the microseconds is possible only in the case when "now" | |
388 | is more than a second less than "then". That means that itval.it_value.tv_sec | |
389 | is greater than zero. The following correction is therefore safe. */ | |
390 | ||
391 | if (itval.it_value.tv_usec < 0) | |
392 | { | |
393 | itval.it_value.tv_usec += 1000000; | |
394 | itval.it_value.tv_sec -= 1; | |
395 | } | |
396 | ||
397 | DEBUG(D_transport|D_receive) | |
398 | { | |
399 | if (!running_in_test_harness) | |
400 | { | |
401 | debug_printf("tick check: %lu.%06lu %lu.%06lu\n", | |
402 | then_tv->tv_sec, then_tv->tv_usec, now_tv.tv_sec, now_tv.tv_usec); | |
403 | debug_printf("waiting %lu.%06lu\n", itval.it_value.tv_sec, | |
404 | itval.it_value.tv_usec); | |
405 | } | |
406 | } | |
407 | ||
408 | milliwait(&itval); | |
409 | } | |
410 | } | |
411 | ||
412 | ||
413 | ||
414 | ||
2632889e PH |
415 | /************************************************* |
416 | * Call fopen() with umask 777 and adjust mode * | |
417 | *************************************************/ | |
418 | ||
419 | /* Exim runs with umask(0) so that files created with open() have the mode that | |
420 | is specified in the open() call. However, there are some files, typically in | |
421 | the spool directory, that are created with fopen(). They end up world-writeable | |
422 | if no precautions are taken. Although the spool directory is not accessible to | |
423 | the world, this is an untidiness. So this is a wrapper function for fopen() | |
424 | that sorts out the mode of the created file. | |
425 | ||
426 | Arguments: | |
427 | filename the file name | |
428 | options the fopen() options | |
429 | mode the required mode | |
430 | ||
431 | Returns: the fopened FILE or NULL | |
432 | */ | |
433 | ||
434 | FILE * | |
1ba28e2b | 435 | modefopen(const uschar *filename, const char *options, mode_t mode) |
2632889e | 436 | { |
67d175de PH |
437 | mode_t saved_umask = umask(0777); |
438 | FILE *f = Ufopen(filename, options); | |
439 | (void)umask(saved_umask); | |
2632889e PH |
440 | if (f != NULL) (void)fchmod(fileno(f), mode); |
441 | return f; | |
442 | } | |
443 | ||
444 | ||
445 | ||
446 | ||
059ec3d9 PH |
447 | /************************************************* |
448 | * Ensure stdin, stdout, and stderr exist * | |
449 | *************************************************/ | |
450 | ||
451 | /* Some operating systems grumble if an exec() happens without a standard | |
452 | input, output, and error (fds 0, 1, 2) being defined. The worry is that some | |
453 | file will be opened and will use these fd values, and then some other bit of | |
454 | code will assume, for example, that it can write error messages to stderr. | |
455 | This function ensures that fds 0, 1, and 2 are open if they do not already | |
456 | exist, by connecting them to /dev/null. | |
457 | ||
458 | This function is also used to ensure that std{in,out,err} exist at all times, | |
459 | so that if any library that Exim calls tries to use them, it doesn't crash. | |
460 | ||
461 | Arguments: None | |
462 | Returns: Nothing | |
463 | */ | |
464 | ||
465 | void | |
466 | exim_nullstd(void) | |
467 | { | |
468 | int i; | |
469 | int devnull = -1; | |
470 | struct stat statbuf; | |
471 | for (i = 0; i <= 2; i++) | |
472 | { | |
473 | if (fstat(i, &statbuf) < 0 && errno == EBADF) | |
474 | { | |
475 | if (devnull < 0) devnull = open("/dev/null", O_RDWR); | |
476 | if (devnull < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s", | |
477 | string_open_failed(errno, "/dev/null")); | |
1fe64dcc | 478 | if (devnull != i) (void)dup2(devnull, i); |
059ec3d9 PH |
479 | } |
480 | } | |
1fe64dcc | 481 | if (devnull > 2) (void)close(devnull); |
059ec3d9 PH |
482 | } |
483 | ||
484 | ||
485 | ||
486 | ||
487 | /************************************************* | |
488 | * Close unwanted file descriptors for delivery * | |
489 | *************************************************/ | |
490 | ||
491 | /* This function is called from a new process that has been forked to deliver | |
492 | an incoming message, either directly, or using exec. | |
493 | ||
494 | We want any smtp input streams to be closed in this new process. However, it | |
495 | has been observed that using fclose() here causes trouble. When reading in -bS | |
496 | input, duplicate copies of messages have been seen. The files will be sharing a | |
497 | file pointer with the parent process, and it seems that fclose() (at least on | |
498 | some systems - I saw this on Solaris 2.5.1) messes with that file pointer, at | |
499 | least sometimes. Hence we go for closing the underlying file descriptors. | |
500 | ||
501 | If TLS is active, we want to shut down the TLS library, but without molesting | |
502 | the parent's SSL connection. | |
503 | ||
504 | For delivery of a non-SMTP message, we want to close stdin and stdout (and | |
505 | stderr unless debugging) because the calling process might have set them up as | |
506 | pipes and be waiting for them to close before it waits for the submission | |
507 | process to terminate. If they aren't closed, they hold up the calling process | |
508 | until the initial delivery process finishes, which is not what we want. | |
509 | ||
510 | Exception: We do want it for synchronous delivery! | |
511 | ||
512 | And notwithstanding all the above, if D_resolver is set, implying resolver | |
513 | debugging, leave stdout open, because that's where the resolver writes its | |
514 | debugging output. | |
515 | ||
516 | When we close stderr (which implies we've also closed stdout), we also get rid | |
517 | of any controlling terminal. | |
518 | ||
519 | Arguments: None | |
520 | Returns: Nothing | |
521 | */ | |
522 | ||
523 | static void | |
524 | close_unwanted(void) | |
525 | { | |
526 | if (smtp_input) | |
527 | { | |
528 | #ifdef SUPPORT_TLS | |
a400eccf | 529 | tls_close(TRUE, FALSE); /* Shut down the TLS library */ |
059ec3d9 | 530 | #endif |
1fe64dcc PH |
531 | (void)close(fileno(smtp_in)); |
532 | (void)close(fileno(smtp_out)); | |
059ec3d9 PH |
533 | smtp_in = NULL; |
534 | } | |
535 | else | |
536 | { | |
1fe64dcc PH |
537 | (void)close(0); /* stdin */ |
538 | if ((debug_selector & D_resolver) == 0) (void)close(1); /* stdout */ | |
539 | if (debug_selector == 0) /* stderr */ | |
059ec3d9 PH |
540 | { |
541 | if (!synchronous_delivery) | |
542 | { | |
1fe64dcc | 543 | (void)close(2); |
059ec3d9 PH |
544 | log_stderr = NULL; |
545 | } | |
546 | (void)setsid(); | |
547 | } | |
548 | } | |
549 | } | |
550 | ||
551 | ||
552 | ||
553 | ||
554 | /************************************************* | |
555 | * Set uid and gid * | |
556 | *************************************************/ | |
557 | ||
558 | /* This function sets a new uid and gid permanently, optionally calling | |
559 | initgroups() to set auxiliary groups. There are some special cases when running | |
560 | Exim in unprivileged modes. In these situations the effective uid will not be | |
561 | root; if we already have the right effective uid/gid, and don't need to | |
562 | initialize any groups, leave things as they are. | |
563 | ||
564 | Arguments: | |
565 | uid the uid | |
566 | gid the gid | |
567 | igflag TRUE if initgroups() wanted | |
568 | msg text to use in debugging output and failure log | |
569 | ||
570 | Returns: nothing; bombs out on failure | |
571 | */ | |
572 | ||
573 | void | |
574 | exim_setugid(uid_t uid, gid_t gid, BOOL igflag, uschar *msg) | |
575 | { | |
576 | uid_t euid = geteuid(); | |
577 | gid_t egid = getegid(); | |
578 | ||
579 | if (euid == root_uid || euid != uid || egid != gid || igflag) | |
580 | { | |
581 | /* At least one OS returns +1 for initgroups failure, so just check for | |
582 | non-zero. */ | |
583 | ||
584 | if (igflag) | |
585 | { | |
586 | struct passwd *pw = getpwuid(uid); | |
587 | if (pw != NULL) | |
588 | { | |
589 | if (initgroups(pw->pw_name, gid) != 0) | |
590 | log_write(0,LOG_MAIN|LOG_PANIC_DIE,"initgroups failed for uid=%ld: %s", | |
591 | (long int)uid, strerror(errno)); | |
592 | } | |
593 | else log_write(0, LOG_MAIN|LOG_PANIC_DIE, "cannot run initgroups(): " | |
594 | "no passwd entry for uid=%ld", (long int)uid); | |
595 | } | |
596 | ||
597 | if (setgid(gid) < 0 || setuid(uid) < 0) | |
598 | { | |
599 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "unable to set gid=%ld or uid=%ld " | |
600 | "(euid=%ld): %s", (long int)gid, (long int)uid, (long int)euid, msg); | |
601 | } | |
602 | } | |
603 | ||
604 | /* Debugging output included uid/gid and all groups */ | |
605 | ||
606 | DEBUG(D_uid) | |
607 | { | |
cd59ab18 | 608 | int group_count, save_errno; |
059ec3d9 PH |
609 | gid_t group_list[NGROUPS_MAX]; |
610 | debug_printf("changed uid/gid: %s\n uid=%ld gid=%ld pid=%ld\n", msg, | |
611 | (long int)geteuid(), (long int)getegid(), (long int)getpid()); | |
612 | group_count = getgroups(NGROUPS_MAX, group_list); | |
cd59ab18 | 613 | save_errno = errno; |
059ec3d9 PH |
614 | debug_printf(" auxiliary group list:"); |
615 | if (group_count > 0) | |
616 | { | |
617 | int i; | |
618 | for (i = 0; i < group_count; i++) debug_printf(" %d", (int)group_list[i]); | |
619 | } | |
cd59ab18 PP |
620 | else if (group_count < 0) |
621 | debug_printf(" <error: %s>", strerror(save_errno)); | |
059ec3d9 PH |
622 | else debug_printf(" <none>"); |
623 | debug_printf("\n"); | |
624 | } | |
625 | } | |
626 | ||
627 | ||
628 | ||
629 | ||
630 | /************************************************* | |
631 | * Exit point * | |
632 | *************************************************/ | |
633 | ||
634 | /* Exim exits via this function so that it always clears up any open | |
635 | databases. | |
636 | ||
637 | Arguments: | |
638 | rc return code | |
639 | ||
640 | Returns: does not return | |
641 | */ | |
642 | ||
643 | void | |
644 | exim_exit(int rc) | |
645 | { | |
646 | search_tidyup(); | |
647 | DEBUG(D_any) | |
648 | debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d terminating with rc=%d " | |
649 | ">>>>>>>>>>>>>>>>\n", (int)getpid(), rc); | |
650 | exit(rc); | |
651 | } | |
652 | ||
653 | ||
654 | ||
655 | ||
656 | /************************************************* | |
657 | * Extract port from host address * | |
658 | *************************************************/ | |
659 | ||
660 | /* Called to extract the port from the values given to -oMa and -oMi. | |
b90c388a PH |
661 | It also checks the syntax of the address, and terminates it before the |
662 | port data when a port is extracted. | |
059ec3d9 PH |
663 | |
664 | Argument: | |
665 | address the address, with possible port on the end | |
666 | ||
667 | Returns: the port, or zero if there isn't one | |
668 | bombs out on a syntax error | |
669 | */ | |
670 | ||
671 | static int | |
672 | check_port(uschar *address) | |
673 | { | |
7cd1141b | 674 | int port = host_address_extract_port(address); |
8e669ac1 | 675 | if (string_is_ip_address(address, NULL) == 0) |
059ec3d9 PH |
676 | { |
677 | fprintf(stderr, "exim abandoned: \"%s\" is not an IP address\n", address); | |
678 | exit(EXIT_FAILURE); | |
679 | } | |
680 | return port; | |
681 | } | |
682 | ||
683 | ||
684 | ||
685 | /************************************************* | |
686 | * Test/verify an address * | |
687 | *************************************************/ | |
688 | ||
689 | /* This function is called by the -bv and -bt code. It extracts a working | |
690 | address from a full RFC 822 address. This isn't really necessary per se, but it | |
691 | has the effect of collapsing source routes. | |
692 | ||
693 | Arguments: | |
694 | s the address string | |
695 | flags flag bits for verify_address() | |
696 | exit_value to be set for failures | |
697 | ||
a5a28604 | 698 | Returns: nothing |
059ec3d9 PH |
699 | */ |
700 | ||
701 | static void | |
702 | test_address(uschar *s, int flags, int *exit_value) | |
703 | { | |
704 | int start, end, domain; | |
705 | uschar *parse_error = NULL; | |
706 | uschar *address = parse_extract_address(s, &parse_error, &start, &end, &domain, | |
707 | FALSE); | |
708 | if (address == NULL) | |
709 | { | |
710 | fprintf(stdout, "syntax error: %s\n", parse_error); | |
711 | *exit_value = 2; | |
712 | } | |
713 | else | |
714 | { | |
715 | int rc = verify_address(deliver_make_addr(address,TRUE), stdout, flags, -1, | |
4deaf07d | 716 | -1, -1, NULL, NULL, NULL); |
059ec3d9 PH |
717 | if (rc == FAIL) *exit_value = 2; |
718 | else if (rc == DEFER && *exit_value == 0) *exit_value = 1; | |
719 | } | |
720 | } | |
721 | ||
722 | ||
723 | ||
059ec3d9 PH |
724 | /************************************************* |
725 | * Show supported features * | |
726 | *************************************************/ | |
727 | ||
4b2241d2 PP |
728 | /* This function is called for -bV/--version and for -d to output the optional |
729 | features of the current Exim binary. | |
059ec3d9 PH |
730 | |
731 | Arguments: a FILE for printing | |
732 | Returns: nothing | |
733 | */ | |
734 | ||
735 | static void | |
736 | show_whats_supported(FILE *f) | |
737 | { | |
44bbabb5 PP |
738 | auth_info *authi; |
739 | ||
059ec3d9 PH |
740 | #ifdef DB_VERSION_STRING |
741 | fprintf(f, "Berkeley DB: %s\n", DB_VERSION_STRING); | |
742 | #elif defined(BTREEVERSION) && defined(HASHVERSION) | |
743 | #ifdef USE_DB | |
744 | fprintf(f, "Probably Berkeley DB version 1.8x (native mode)\n"); | |
745 | #else | |
746 | fprintf(f, "Probably Berkeley DB version 1.8x (compatibility mode)\n"); | |
747 | #endif | |
748 | #elif defined(_DBM_RDONLY) || defined(dbm_dirfno) | |
749 | fprintf(f, "Probably ndbm\n"); | |
750 | #elif defined(USE_TDB) | |
751 | fprintf(f, "Using tdb\n"); | |
752 | #else | |
753 | #ifdef USE_GDBM | |
754 | fprintf(f, "Probably GDBM (native mode)\n"); | |
755 | #else | |
756 | fprintf(f, "Probably GDBM (compatibility mode)\n"); | |
757 | #endif | |
758 | #endif | |
759 | ||
760 | fprintf(f, "Support for:"); | |
9cec981f PH |
761 | #ifdef SUPPORT_CRYPTEQ |
762 | fprintf(f, " crypteq"); | |
763 | #endif | |
059ec3d9 PH |
764 | #if HAVE_ICONV |
765 | fprintf(f, " iconv()"); | |
766 | #endif | |
767 | #if HAVE_IPV6 | |
768 | fprintf(f, " IPv6"); | |
769 | #endif | |
79378e0f PH |
770 | #ifdef HAVE_SETCLASSRESOURCES |
771 | fprintf(f, " use_setclassresources"); | |
929ba01c | 772 | #endif |
059ec3d9 PH |
773 | #ifdef SUPPORT_PAM |
774 | fprintf(f, " PAM"); | |
775 | #endif | |
776 | #ifdef EXIM_PERL | |
777 | fprintf(f, " Perl"); | |
778 | #endif | |
1a46a8c5 PH |
779 | #ifdef EXPAND_DLFUNC |
780 | fprintf(f, " Expand_dlfunc"); | |
781 | #endif | |
059ec3d9 PH |
782 | #ifdef USE_TCP_WRAPPERS |
783 | fprintf(f, " TCPwrappers"); | |
784 | #endif | |
785 | #ifdef SUPPORT_TLS | |
786 | #ifdef USE_GNUTLS | |
787 | fprintf(f, " GnuTLS"); | |
788 | #else | |
789 | fprintf(f, " OpenSSL"); | |
790 | #endif | |
791 | #endif | |
b2f5a032 PH |
792 | #ifdef SUPPORT_TRANSLATE_IP_ADDRESS |
793 | fprintf(f, " translate_ip_address"); | |
794 | #endif | |
f174f16e PH |
795 | #ifdef SUPPORT_MOVE_FROZEN_MESSAGES |
796 | fprintf(f, " move_frozen_messages"); | |
797 | #endif | |
8523533c TK |
798 | #ifdef WITH_CONTENT_SCAN |
799 | fprintf(f, " Content_Scanning"); | |
800 | #endif | |
80a47a2c TK |
801 | #ifndef DISABLE_DKIM |
802 | fprintf(f, " DKIM"); | |
803 | #endif | |
8523533c TK |
804 | #ifdef WITH_OLD_DEMIME |
805 | fprintf(f, " Old_Demime"); | |
806 | #endif | |
807 | #ifdef EXPERIMENTAL_SPF | |
808 | fprintf(f, " Experimental_SPF"); | |
809 | #endif | |
810 | #ifdef EXPERIMENTAL_SRS | |
811 | fprintf(f, " Experimental_SRS"); | |
812 | #endif | |
813 | #ifdef EXPERIMENTAL_BRIGHTMAIL | |
814 | fprintf(f, " Experimental_Brightmail"); | |
815 | #endif | |
6a8f9482 TK |
816 | #ifdef EXPERIMENTAL_DCC |
817 | fprintf(f, " Experimental_DCC"); | |
818 | #endif | |
4840604e TL |
819 | #ifdef EXPERIMENTAL_DMARC |
820 | fprintf(f, " Experimental_DMARC"); | |
821 | #endif | |
ccf08019 JH |
822 | #ifdef EXPERIMENTAL_OCSP |
823 | fprintf(f, " Experimental_OCSP"); | |
824 | #endif | |
fd98a5c6 JH |
825 | #ifdef EXPERIMENTAL_PRDR |
826 | fprintf(f, " Experimental_PRDR"); | |
827 | #endif | |
930407fb TL |
828 | #ifdef EXPERIMENTAL_PROXY |
829 | fprintf(f, " Experimental_Proxy"); | |
830 | #endif | |
d68218c7 JH |
831 | #ifdef EXPERIMENTAL_TPDA |
832 | fprintf(f, " Experimental_TPDA"); | |
833 | #endif | |
9bdd29ad TL |
834 | #ifdef EXPERIMENTAL_REDIS |
835 | fprintf(f, " Experimental_Redis"); | |
836 | #endif | |
059ec3d9 PH |
837 | fprintf(f, "\n"); |
838 | ||
e6d225ae DW |
839 | fprintf(f, "Lookups (built-in):"); |
840 | #if defined(LOOKUP_LSEARCH) && LOOKUP_LSEARCH!=2 | |
059ec3d9 PH |
841 | fprintf(f, " lsearch wildlsearch nwildlsearch iplsearch"); |
842 | #endif | |
e6d225ae | 843 | #if defined(LOOKUP_CDB) && LOOKUP_CDB!=2 |
059ec3d9 PH |
844 | fprintf(f, " cdb"); |
845 | #endif | |
e6d225ae | 846 | #if defined(LOOKUP_DBM) && LOOKUP_DBM!=2 |
4a6a987a | 847 | fprintf(f, " dbm dbmjz dbmnz"); |
059ec3d9 | 848 | #endif |
e6d225ae | 849 | #if defined(LOOKUP_DNSDB) && LOOKUP_DNSDB!=2 |
059ec3d9 PH |
850 | fprintf(f, " dnsdb"); |
851 | #endif | |
e6d225ae | 852 | #if defined(LOOKUP_DSEARCH) && LOOKUP_DSEARCH!=2 |
059ec3d9 PH |
853 | fprintf(f, " dsearch"); |
854 | #endif | |
e6d225ae | 855 | #if defined(LOOKUP_IBASE) && LOOKUP_IBASE!=2 |
059ec3d9 PH |
856 | fprintf(f, " ibase"); |
857 | #endif | |
e6d225ae | 858 | #if defined(LOOKUP_LDAP) && LOOKUP_LDAP!=2 |
059ec3d9 PH |
859 | fprintf(f, " ldap ldapdn ldapm"); |
860 | #endif | |
e6d225ae | 861 | #if defined(LOOKUP_MYSQL) && LOOKUP_MYSQL!=2 |
059ec3d9 PH |
862 | fprintf(f, " mysql"); |
863 | #endif | |
e6d225ae | 864 | #if defined(LOOKUP_NIS) && LOOKUP_NIS!=2 |
059ec3d9 PH |
865 | fprintf(f, " nis nis0"); |
866 | #endif | |
e6d225ae | 867 | #if defined(LOOKUP_NISPLUS) && LOOKUP_NISPLUS!=2 |
059ec3d9 PH |
868 | fprintf(f, " nisplus"); |
869 | #endif | |
e6d225ae | 870 | #if defined(LOOKUP_ORACLE) && LOOKUP_ORACLE!=2 |
059ec3d9 PH |
871 | fprintf(f, " oracle"); |
872 | #endif | |
e6d225ae | 873 | #if defined(LOOKUP_PASSWD) && LOOKUP_PASSWD!=2 |
059ec3d9 PH |
874 | fprintf(f, " passwd"); |
875 | #endif | |
e6d225ae | 876 | #if defined(LOOKUP_PGSQL) && LOOKUP_PGSQL!=2 |
059ec3d9 PH |
877 | fprintf(f, " pgsql"); |
878 | #endif | |
e6d225ae | 879 | #if defined(LOOKUP_SQLITE) && LOOKUP_SQLITE!=2 |
13b685f9 PH |
880 | fprintf(f, " sqlite"); |
881 | #endif | |
e6d225ae | 882 | #if defined(LOOKUP_TESTDB) && LOOKUP_TESTDB!=2 |
059ec3d9 PH |
883 | fprintf(f, " testdb"); |
884 | #endif | |
e6d225ae | 885 | #if defined(LOOKUP_WHOSON) && LOOKUP_WHOSON!=2 |
059ec3d9 PH |
886 | fprintf(f, " whoson"); |
887 | #endif | |
888 | fprintf(f, "\n"); | |
889 | ||
890 | fprintf(f, "Authenticators:"); | |
891 | #ifdef AUTH_CRAM_MD5 | |
892 | fprintf(f, " cram_md5"); | |
893 | #endif | |
894 | #ifdef AUTH_CYRUS_SASL | |
895 | fprintf(f, " cyrus_sasl"); | |
896 | #endif | |
14aa5a05 PH |
897 | #ifdef AUTH_DOVECOT |
898 | fprintf(f, " dovecot"); | |
899 | #endif | |
44bbabb5 PP |
900 | #ifdef AUTH_GSASL |
901 | fprintf(f, " gsasl"); | |
902 | #endif | |
dde3daac PP |
903 | #ifdef AUTH_HEIMDAL_GSSAPI |
904 | fprintf(f, " heimdal_gssapi"); | |
905 | #endif | |
059ec3d9 PH |
906 | #ifdef AUTH_PLAINTEXT |
907 | fprintf(f, " plaintext"); | |
908 | #endif | |
909 | #ifdef AUTH_SPA | |
910 | fprintf(f, " spa"); | |
911 | #endif | |
912 | fprintf(f, "\n"); | |
913 | ||
914 | fprintf(f, "Routers:"); | |
915 | #ifdef ROUTER_ACCEPT | |
916 | fprintf(f, " accept"); | |
917 | #endif | |
918 | #ifdef ROUTER_DNSLOOKUP | |
919 | fprintf(f, " dnslookup"); | |
920 | #endif | |
921 | #ifdef ROUTER_IPLITERAL | |
922 | fprintf(f, " ipliteral"); | |
923 | #endif | |
924 | #ifdef ROUTER_IPLOOKUP | |
925 | fprintf(f, " iplookup"); | |
926 | #endif | |
927 | #ifdef ROUTER_MANUALROUTE | |
928 | fprintf(f, " manualroute"); | |
929 | #endif | |
930 | #ifdef ROUTER_QUERYPROGRAM | |
931 | fprintf(f, " queryprogram"); | |
932 | #endif | |
933 | #ifdef ROUTER_REDIRECT | |
934 | fprintf(f, " redirect"); | |
935 | #endif | |
936 | fprintf(f, "\n"); | |
937 | ||
938 | fprintf(f, "Transports:"); | |
939 | #ifdef TRANSPORT_APPENDFILE | |
940 | fprintf(f, " appendfile"); | |
941 | #ifdef SUPPORT_MAILDIR | |
942 | fprintf(f, "/maildir"); | |
943 | #endif | |
944 | #ifdef SUPPORT_MAILSTORE | |
945 | fprintf(f, "/mailstore"); | |
946 | #endif | |
947 | #ifdef SUPPORT_MBX | |
948 | fprintf(f, "/mbx"); | |
949 | #endif | |
950 | #endif | |
951 | #ifdef TRANSPORT_AUTOREPLY | |
952 | fprintf(f, " autoreply"); | |
953 | #endif | |
954 | #ifdef TRANSPORT_LMTP | |
955 | fprintf(f, " lmtp"); | |
956 | #endif | |
957 | #ifdef TRANSPORT_PIPE | |
958 | fprintf(f, " pipe"); | |
959 | #endif | |
960 | #ifdef TRANSPORT_SMTP | |
961 | fprintf(f, " smtp"); | |
962 | #endif | |
963 | fprintf(f, "\n"); | |
964 | ||
965 | if (fixed_never_users[0] > 0) | |
966 | { | |
967 | int i; | |
968 | fprintf(f, "Fixed never_users: "); | |
969 | for (i = 1; i <= (int)fixed_never_users[0] - 1; i++) | |
970 | fprintf(f, "%d:", (unsigned int)fixed_never_users[i]); | |
971 | fprintf(f, "%d\n", (unsigned int)fixed_never_users[i]); | |
972 | } | |
21c28500 | 973 | |
73a46702 | 974 | fprintf(f, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t)); |
36f12725 | 975 | |
6545de78 PP |
976 | /* Everything else is details which are only worth reporting when debugging. |
977 | Perhaps the tls_version_report should move into this too. */ | |
978 | DEBUG(D_any) do { | |
979 | ||
980 | int i; | |
981 | ||
b3c261f7 PP |
982 | /* clang defines __GNUC__ (at least, for me) so test for it first */ |
983 | #if defined(__clang__) | |
984 | fprintf(f, "Compiler: CLang [%s]\n", __clang_version__); | |
985 | #elif defined(__GNUC__) | |
986 | fprintf(f, "Compiler: GCC [%s]\n", | |
987 | # ifdef __VERSION__ | |
988 | __VERSION__ | |
989 | # else | |
990 | "? unknown version ?" | |
991 | # endif | |
992 | ); | |
993 | #else | |
994 | fprintf(f, "Compiler: <unknown>\n"); | |
995 | #endif | |
996 | ||
754a0503 PP |
997 | #ifdef SUPPORT_TLS |
998 | tls_version_report(f); | |
999 | #endif | |
1000 | ||
44bbabb5 PP |
1001 | for (authi = auths_available; *authi->driver_name != '\0'; ++authi) { |
1002 | if (authi->version_report) { | |
1003 | (*authi->version_report)(f); | |
1004 | } | |
1005 | } | |
6545de78 | 1006 | |
decd95cb | 1007 | /* PCRE_PRERELEASE is either defined and empty or a bare sequence of |
6475bd82 PP |
1008 | characters; unless it's an ancient version of PCRE in which case it |
1009 | is not defined. */ | |
1010 | #ifndef PCRE_PRERELEASE | |
1011 | #define PCRE_PRERELEASE | |
1012 | #endif | |
1013 | #define QUOTE(X) #X | |
1014 | #define EXPAND_AND_QUOTE(X) QUOTE(X) | |
6545de78 PP |
1015 | fprintf(f, "Library version: PCRE: Compile: %d.%d%s\n" |
1016 | " Runtime: %s\n", | |
1017 | PCRE_MAJOR, PCRE_MINOR, | |
6475bd82 | 1018 | EXPAND_AND_QUOTE(PCRE_PRERELEASE) "", |
6545de78 | 1019 | pcre_version()); |
6475bd82 PP |
1020 | #undef QUOTE |
1021 | #undef EXPAND_AND_QUOTE | |
6545de78 PP |
1022 | |
1023 | init_lookup_list(); | |
1024 | for (i = 0; i < lookup_list_count; i++) | |
1025 | { | |
1026 | if (lookup_list[i]->version_report) | |
1027 | lookup_list[i]->version_report(f); | |
1028 | } | |
1029 | ||
b70d2586 PP |
1030 | #ifdef WHITELIST_D_MACROS |
1031 | fprintf(f, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS); | |
1032 | #else | |
1033 | fprintf(f, "WHITELIST_D_MACROS unset\n"); | |
1034 | #endif | |
1035 | #ifdef TRUSTED_CONFIG_LIST | |
1036 | fprintf(f, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST); | |
1037 | #else | |
1038 | fprintf(f, "TRUSTED_CONFIG_LIST unset\n"); | |
1039 | #endif | |
1040 | ||
6545de78 | 1041 | } while (0); |
059ec3d9 PH |
1042 | } |
1043 | ||
1044 | ||
98a90c36 PP |
1045 | /************************************************* |
1046 | * Show auxiliary information about Exim * | |
1047 | *************************************************/ | |
1048 | ||
1049 | static void | |
1050 | show_exim_information(enum commandline_info request, FILE *stream) | |
1051 | { | |
1052 | const uschar **pp; | |
1053 | ||
1054 | switch(request) | |
1055 | { | |
1056 | case CMDINFO_NONE: | |
1057 | fprintf(stream, "Oops, something went wrong.\n"); | |
1058 | return; | |
1059 | case CMDINFO_HELP: | |
1060 | fprintf(stream, | |
1061 | "The -bI: flag takes a string indicating which information to provide.\n" | |
1062 | "If the string is not recognised, you'll get this help (on stderr).\n" | |
1063 | "\n" | |
1064 | " exim -bI:help this information\n" | |
36a3ae5f | 1065 | " exim -bI:dscp dscp value keywords known\n" |
98a90c36 PP |
1066 | " exim -bI:sieve list of supported sieve extensions, one per line.\n" |
1067 | ); | |
1068 | return; | |
1069 | case CMDINFO_SIEVE: | |
1070 | for (pp = exim_sieve_extension_list; *pp; ++pp) | |
1071 | fprintf(stream, "%s\n", *pp); | |
1072 | return; | |
36a3ae5f PP |
1073 | case CMDINFO_DSCP: |
1074 | dscp_list_to_stream(stream); | |
1075 | return; | |
98a90c36 PP |
1076 | } |
1077 | } | |
059ec3d9 PH |
1078 | |
1079 | ||
1080 | /************************************************* | |
1081 | * Quote a local part * | |
1082 | *************************************************/ | |
1083 | ||
1084 | /* This function is used when a sender address or a From: or Sender: header | |
1085 | line is being created from the caller's login, or from an authenticated_id. It | |
1086 | applies appropriate quoting rules for a local part. | |
1087 | ||
1088 | Argument: the local part | |
1089 | Returns: the local part, quoted if necessary | |
1090 | */ | |
1091 | ||
1092 | uschar * | |
1093 | local_part_quote(uschar *lpart) | |
1094 | { | |
1095 | BOOL needs_quote = FALSE; | |
1096 | int size, ptr; | |
1097 | uschar *yield; | |
1098 | uschar *t; | |
1099 | ||
1100 | for (t = lpart; !needs_quote && *t != 0; t++) | |
1101 | { | |
1102 | needs_quote = !isalnum(*t) && strchr("!#$%&'*+-/=?^_`{|}~", *t) == NULL && | |
1103 | (*t != '.' || t == lpart || t[1] == 0); | |
1104 | } | |
1105 | ||
1106 | if (!needs_quote) return lpart; | |
1107 | ||
1108 | size = ptr = 0; | |
1109 | yield = string_cat(NULL, &size, &ptr, US"\"", 1); | |
1110 | ||
1111 | for (;;) | |
1112 | { | |
1113 | uschar *nq = US Ustrpbrk(lpart, "\\\""); | |
1114 | if (nq == NULL) | |
1115 | { | |
1116 | yield = string_cat(yield, &size, &ptr, lpart, Ustrlen(lpart)); | |
1117 | break; | |
1118 | } | |
1119 | yield = string_cat(yield, &size, &ptr, lpart, nq - lpart); | |
1120 | yield = string_cat(yield, &size, &ptr, US"\\", 1); | |
1121 | yield = string_cat(yield, &size, &ptr, nq, 1); | |
1122 | lpart = nq + 1; | |
1123 | } | |
1124 | ||
1125 | yield = string_cat(yield, &size, &ptr, US"\"", 1); | |
1126 | yield[ptr] = 0; | |
1127 | return yield; | |
1128 | } | |
1129 | ||
1130 | ||
1131 | ||
1132 | #ifdef USE_READLINE | |
1133 | /************************************************* | |
1134 | * Load readline() functions * | |
1135 | *************************************************/ | |
1136 | ||
1137 | /* This function is called from testing executions that read data from stdin, | |
1138 | but only when running as the calling user. Currently, only -be does this. The | |
1139 | function loads the readline() function library and passes back the functions. | |
1140 | On some systems, it needs the curses library, so load that too, but try without | |
1141 | it if loading fails. All this functionality has to be requested at build time. | |
1142 | ||
1143 | Arguments: | |
1144 | fn_readline_ptr pointer to where to put the readline pointer | |
1145 | fn_addhist_ptr pointer to where to put the addhistory function | |
1146 | ||
1147 | Returns: the dlopen handle or NULL on failure | |
1148 | */ | |
1149 | ||
1150 | static void * | |
1ba28e2b PP |
1151 | set_readline(char * (**fn_readline_ptr)(const char *), |
1152 | void (**fn_addhist_ptr)(const char *)) | |
059ec3d9 PH |
1153 | { |
1154 | void *dlhandle; | |
e12f8c32 | 1155 | void *dlhandle_curses = dlopen("libcurses." DYNLIB_FN_EXT, RTLD_GLOBAL|RTLD_LAZY); |
059ec3d9 | 1156 | |
e12f8c32 | 1157 | dlhandle = dlopen("libreadline." DYNLIB_FN_EXT, RTLD_GLOBAL|RTLD_NOW); |
059ec3d9 PH |
1158 | if (dlhandle_curses != NULL) dlclose(dlhandle_curses); |
1159 | ||
1160 | if (dlhandle != NULL) | |
1161 | { | |
1ba28e2b PP |
1162 | /* Checked manual pages; at least in GNU Readline 6.1, the prototypes are: |
1163 | * char * readline (const char *prompt); | |
1164 | * void add_history (const char *string); | |
1165 | */ | |
1166 | *fn_readline_ptr = (char *(*)(const char*))dlsym(dlhandle, "readline"); | |
1167 | *fn_addhist_ptr = (void(*)(const char*))dlsym(dlhandle, "add_history"); | |
059ec3d9 PH |
1168 | } |
1169 | else | |
1170 | { | |
1171 | DEBUG(D_any) debug_printf("failed to load readline: %s\n", dlerror()); | |
1172 | } | |
1173 | ||
1174 | return dlhandle; | |
1175 | } | |
1176 | #endif | |
1177 | ||
1178 | ||
1179 | ||
1180 | /************************************************* | |
1181 | * Get a line from stdin for testing things * | |
1182 | *************************************************/ | |
1183 | ||
1184 | /* This function is called when running tests that can take a number of lines | |
1185 | of input (for example, -be and -bt). It handles continuations and trailing | |
1186 | spaces. And prompting and a blank line output on eof. If readline() is in use, | |
1187 | the arguments are non-NULL and provide the relevant functions. | |
1188 | ||
1189 | Arguments: | |
1190 | fn_readline readline function or NULL | |
1191 | fn_addhist addhist function or NULL | |
1192 | ||
1193 | Returns: pointer to dynamic memory, or NULL at end of file | |
1194 | */ | |
1195 | ||
1196 | static uschar * | |
1ba28e2b | 1197 | get_stdinput(char *(*fn_readline)(const char *), void(*fn_addhist)(const char *)) |
059ec3d9 PH |
1198 | { |
1199 | int i; | |
1200 | int size = 0; | |
1201 | int ptr = 0; | |
1202 | uschar *yield = NULL; | |
1203 | ||
328895cc | 1204 | if (fn_readline == NULL) { printf("> "); fflush(stdout); } |
059ec3d9 PH |
1205 | |
1206 | for (i = 0;; i++) | |
1207 | { | |
1208 | uschar buffer[1024]; | |
1209 | uschar *p, *ss; | |
1210 | ||
1211 | #ifdef USE_READLINE | |
1212 | char *readline_line = NULL; | |
1213 | if (fn_readline != NULL) | |
1214 | { | |
1215 | if ((readline_line = fn_readline((i > 0)? "":"> ")) == NULL) break; | |
1216 | if (*readline_line != 0 && fn_addhist != NULL) fn_addhist(readline_line); | |
1217 | p = US readline_line; | |
1218 | } | |
1219 | else | |
1220 | #endif | |
1221 | ||
1222 | /* readline() not in use */ | |
1223 | ||
1224 | { | |
1225 | if (Ufgets(buffer, sizeof(buffer), stdin) == NULL) break; | |
1226 | p = buffer; | |
1227 | } | |
1228 | ||
1229 | /* Handle the line */ | |
1230 | ||
1231 | ss = p + (int)Ustrlen(p); | |
1232 | while (ss > p && isspace(ss[-1])) ss--; | |
1233 | ||
1234 | if (i > 0) | |
1235 | { | |
1236 | while (p < ss && isspace(*p)) p++; /* leading space after cont */ | |
1237 | } | |
1238 | ||
1239 | yield = string_cat(yield, &size, &ptr, p, ss - p); | |
1240 | ||
1241 | #ifdef USE_READLINE | |
1242 | if (fn_readline != NULL) free(readline_line); | |
1243 | #endif | |
1244 | ||
1245 | if (ss == p || yield[ptr-1] != '\\') | |
1246 | { | |
1247 | yield[ptr] = 0; | |
1248 | break; | |
1249 | } | |
1250 | yield[--ptr] = 0; | |
1251 | } | |
1252 | ||
1253 | if (yield == NULL) printf("\n"); | |
1254 | return yield; | |
1255 | } | |
1256 | ||
1257 | ||
1258 | ||
81ea09ca NM |
1259 | /************************************************* |
1260 | * Output usage information for the program * | |
1261 | *************************************************/ | |
1262 | ||
1263 | /* This function is called when there are no recipients | |
1264 | or a specific --help argument was added. | |
1265 | ||
1266 | Arguments: | |
1267 | progname information on what name we were called by | |
1268 | ||
1269 | Returns: DOES NOT RETURN | |
1270 | */ | |
1271 | ||
1272 | static void | |
1273 | exim_usage(uschar *progname) | |
1274 | { | |
1275 | ||
1276 | /* Handle specific program invocation varients */ | |
1277 | if (Ustrcmp(progname, US"-mailq") == 0) | |
1278 | { | |
1279 | fprintf(stderr, | |
e765a0f1 | 1280 | "mailq - list the contents of the mail queue\n\n" |
81ea09ca NM |
1281 | "For a list of options, see the Exim documentation.\n"); |
1282 | exit(EXIT_FAILURE); | |
1283 | } | |
1284 | ||
1285 | /* Generic usage - we output this whatever happens */ | |
1286 | fprintf(stderr, | |
1287 | "Exim is a Mail Transfer Agent. It is normally called by Mail User Agents,\n" | |
1288 | "not directly from a shell command line. Options and/or arguments control\n" | |
1289 | "what it does when called. For a list of options, see the Exim documentation.\n"); | |
1290 | ||
1291 | exit(EXIT_FAILURE); | |
1292 | } | |
1293 | ||
1294 | ||
1295 | ||
a7cbbf50 PP |
1296 | /************************************************* |
1297 | * Validate that the macros given are okay * | |
1298 | *************************************************/ | |
1299 | ||
1300 | /* Typically, Exim will drop privileges if macros are supplied. In some | |
1301 | cases, we want to not do so. | |
1302 | ||
1303 | Arguments: none (macros is a global) | |
1304 | Returns: true if trusted, false otherwise | |
1305 | */ | |
1306 | ||
1307 | static BOOL | |
1308 | macros_trusted(void) | |
1309 | { | |
1310 | #ifdef WHITELIST_D_MACROS | |
1311 | macro_item *m; | |
1312 | uschar *whitelisted, *end, *p, **whites, **w; | |
1313 | int white_count, i, n; | |
1314 | size_t len; | |
1315 | BOOL prev_char_item, found; | |
1316 | #endif | |
1317 | ||
1318 | if (macros == NULL) | |
1319 | return TRUE; | |
1320 | #ifndef WHITELIST_D_MACROS | |
1321 | return FALSE; | |
1322 | #else | |
1323 | ||
66581d1e PP |
1324 | /* We only trust -D overrides for some invoking users: |
1325 | root, the exim run-time user, the optional config owner user. | |
1326 | I don't know why config-owner would be needed, but since they can own the | |
1327 | config files anyway, there's no security risk to letting them override -D. */ | |
1328 | if ( ! ((real_uid == root_uid) | |
1329 | || (real_uid == exim_uid) | |
1330 | #ifdef CONFIGURE_OWNER | |
1331 | || (real_uid == config_uid) | |
1332 | #endif | |
1333 | )) | |
1334 | { | |
1335 | debug_printf("macros_trusted rejecting macros for uid %d\n", (int) real_uid); | |
1336 | return FALSE; | |
1337 | } | |
1338 | ||
a7cbbf50 PP |
1339 | /* Get a list of macros which are whitelisted */ |
1340 | whitelisted = string_copy_malloc(US WHITELIST_D_MACROS); | |
1341 | prev_char_item = FALSE; | |
1342 | white_count = 0; | |
1343 | for (p = whitelisted; *p != '\0'; ++p) | |
1344 | { | |
1345 | if (*p == ':' || isspace(*p)) | |
1346 | { | |
1347 | *p = '\0'; | |
1348 | if (prev_char_item) | |
1349 | ++white_count; | |
1350 | prev_char_item = FALSE; | |
1351 | continue; | |
1352 | } | |
1353 | if (!prev_char_item) | |
1354 | prev_char_item = TRUE; | |
1355 | } | |
1356 | end = p; | |
1357 | if (prev_char_item) | |
1358 | ++white_count; | |
1359 | if (!white_count) | |
1360 | return FALSE; | |
1361 | whites = store_malloc(sizeof(uschar *) * (white_count+1)); | |
1362 | for (p = whitelisted, i = 0; (p != end) && (i < white_count); ++p) | |
1363 | { | |
1364 | if (*p != '\0') | |
1365 | { | |
1366 | whites[i++] = p; | |
1367 | if (i == white_count) | |
1368 | break; | |
1369 | while (*p != '\0' && p < end) | |
1370 | ++p; | |
1371 | } | |
1372 | } | |
1373 | whites[i] = NULL; | |
1374 | ||
1375 | /* The list of macros should be very short. Accept the N*M complexity. */ | |
1376 | for (m = macros; m != NULL; m = m->next) | |
1377 | { | |
1378 | found = FALSE; | |
1379 | for (w = whites; *w; ++w) | |
1380 | if (Ustrcmp(*w, m->name) == 0) | |
1381 | { | |
1382 | found = TRUE; | |
1383 | break; | |
1384 | } | |
1385 | if (!found) | |
1386 | return FALSE; | |
1387 | if (m->replacement == NULL) | |
1388 | continue; | |
1389 | len = Ustrlen(m->replacement); | |
1390 | if (len == 0) | |
1391 | continue; | |
1392 | n = pcre_exec(regex_whitelisted_macro, NULL, CS m->replacement, len, | |
1393 | 0, PCRE_EOPT, NULL, 0); | |
1394 | if (n < 0) | |
1395 | { | |
1396 | if (n != PCRE_ERROR_NOMATCH) | |
1397 | debug_printf("macros_trusted checking %s returned %d\n", m->name, n); | |
1398 | return FALSE; | |
1399 | } | |
1400 | } | |
43236f35 | 1401 | DEBUG(D_any) debug_printf("macros_trusted overridden to true by whitelisting\n"); |
a7cbbf50 PP |
1402 | return TRUE; |
1403 | #endif | |
1404 | } | |
1405 | ||
1406 | ||
059ec3d9 PH |
1407 | /************************************************* |
1408 | * Entry point and high-level code * | |
1409 | *************************************************/ | |
1410 | ||
1411 | /* Entry point for the Exim mailer. Analyse the arguments and arrange to take | |
1412 | the appropriate action. All the necessary functions are present in the one | |
1413 | binary. I originally thought one should split it up, but it turns out that so | |
1414 | much of the apparatus is needed in each chunk that one might as well just have | |
1415 | it all available all the time, which then makes the coding easier as well. | |
1416 | ||
1417 | Arguments: | |
1418 | argc count of entries in argv | |
1419 | argv argument strings, with argv[0] being the program name | |
1420 | ||
1421 | Returns: EXIT_SUCCESS if terminated successfully | |
1422 | EXIT_FAILURE otherwise, except when a message has been sent | |
1423 | to the sender, and -oee was given | |
1424 | */ | |
1425 | ||
1426 | int | |
1427 | main(int argc, char **cargv) | |
1428 | { | |
1429 | uschar **argv = USS cargv; | |
1430 | int arg_receive_timeout = -1; | |
1431 | int arg_smtp_receive_timeout = -1; | |
1432 | int arg_error_handling = error_handling; | |
f05da2e8 PH |
1433 | int filter_sfd = -1; |
1434 | int filter_ufd = -1; | |
059ec3d9 | 1435 | int group_count; |
1670ef10 | 1436 | int i, rv; |
059ec3d9 PH |
1437 | int list_queue_option = 0; |
1438 | int msg_action = 0; | |
1439 | int msg_action_arg = -1; | |
1440 | int namelen = (argv[0] == NULL)? 0 : Ustrlen(argv[0]); | |
1441 | int queue_only_reason = 0; | |
1442 | #ifdef EXIM_PERL | |
1443 | int perl_start_option = 0; | |
1444 | #endif | |
1445 | int recipients_arg = argc; | |
1446 | int sender_address_domain = 0; | |
1447 | int test_retry_arg = -1; | |
1448 | int test_rewrite_arg = -1; | |
1449 | BOOL arg_queue_only = FALSE; | |
1450 | BOOL bi_option = FALSE; | |
1451 | BOOL checking = FALSE; | |
1452 | BOOL count_queue = FALSE; | |
1453 | BOOL expansion_test = FALSE; | |
1454 | BOOL extract_recipients = FALSE; | |
f4ee74ac | 1455 | BOOL flag_G = FALSE; |
12f69989 | 1456 | BOOL flag_n = FALSE; |
059ec3d9 PH |
1457 | BOOL forced_delivery = FALSE; |
1458 | BOOL f_end_dot = FALSE; | |
1459 | BOOL deliver_give_up = FALSE; | |
1460 | BOOL list_queue = FALSE; | |
1461 | BOOL list_options = FALSE; | |
1462 | BOOL local_queue_only; | |
1463 | BOOL more = TRUE; | |
1464 | BOOL one_msg_action = FALSE; | |
1465 | BOOL queue_only_set = FALSE; | |
1466 | BOOL receiving_message = TRUE; | |
33d73e3b | 1467 | BOOL sender_ident_set = FALSE; |
8669f003 | 1468 | BOOL session_local_queue_only; |
059ec3d9 PH |
1469 | BOOL unprivileged; |
1470 | BOOL removed_privilege = FALSE; | |
81ea09ca | 1471 | BOOL usage_wanted = FALSE; |
059ec3d9 PH |
1472 | BOOL verify_address_mode = FALSE; |
1473 | BOOL verify_as_sender = FALSE; | |
1474 | BOOL version_printed = FALSE; | |
1475 | uschar *alias_arg = NULL; | |
1476 | uschar *called_as = US""; | |
a3fb9793 | 1477 | uschar *cmdline_syslog_name = NULL; |
059ec3d9 PH |
1478 | uschar *start_queue_run_id = NULL; |
1479 | uschar *stop_queue_run_id = NULL; | |
328895cc | 1480 | uschar *expansion_test_message = NULL; |
059ec3d9 PH |
1481 | uschar *ftest_domain = NULL; |
1482 | uschar *ftest_localpart = NULL; | |
1483 | uschar *ftest_prefix = NULL; | |
1484 | uschar *ftest_suffix = NULL; | |
8544e77a | 1485 | uschar *malware_test_file = NULL; |
059ec3d9 PH |
1486 | uschar *real_sender_address; |
1487 | uschar *originator_home = US"/"; | |
a3fb9793 | 1488 | size_t sz; |
059ec3d9 PH |
1489 | void *reset_point; |
1490 | ||
1491 | struct passwd *pw; | |
1492 | struct stat statbuf; | |
1493 | pid_t passed_qr_pid = (pid_t)0; | |
1494 | int passed_qr_pipe = -1; | |
1495 | gid_t group_list[NGROUPS_MAX]; | |
1496 | ||
98a90c36 PP |
1497 | /* For the -bI: flag */ |
1498 | enum commandline_info info_flag = CMDINFO_NONE; | |
1499 | BOOL info_stdout = FALSE; | |
1500 | ||
059ec3d9 PH |
1501 | /* Possible options for -R and -S */ |
1502 | ||
1503 | static uschar *rsopts[] = { US"f", US"ff", US"r", US"rf", US"rff" }; | |
1504 | ||
1505 | /* Need to define this in case we need to change the environment in order | |
1506 | to get rid of a bogus time zone. We have to make it char rather than uschar | |
1507 | because some OS define it in /usr/include/unistd.h. */ | |
1508 | ||
1509 | extern char **environ; | |
1510 | ||
35edf2ff | 1511 | /* If the Exim user and/or group and/or the configuration file owner/group were |
059ec3d9 PH |
1512 | defined by ref:name at build time, we must now find the actual uid/gid values. |
1513 | This is a feature to make the lives of binary distributors easier. */ | |
1514 | ||
1515 | #ifdef EXIM_USERNAME | |
1516 | if (route_finduser(US EXIM_USERNAME, &pw, &exim_uid)) | |
1517 | { | |
10385c15 PP |
1518 | if (exim_uid == 0) |
1519 | { | |
1520 | fprintf(stderr, "exim: refusing to run with uid 0 for \"%s\"\n", | |
1521 | EXIM_USERNAME); | |
1522 | exit(EXIT_FAILURE); | |
1523 | } | |
084c1d8c PP |
1524 | /* If ref:name uses a number as the name, route_finduser() returns |
1525 | TRUE with exim_uid set and pw coerced to NULL. */ | |
1526 | if (pw) | |
1527 | exim_gid = pw->pw_gid; | |
1528 | #ifndef EXIM_GROUPNAME | |
1529 | else | |
1530 | { | |
1531 | fprintf(stderr, | |
1532 | "exim: ref:name should specify a usercode, not a group.\n" | |
1533 | "exim: can't let you get away with it unless you also specify a group.\n"); | |
1534 | exit(EXIT_FAILURE); | |
1535 | } | |
1536 | #endif | |
059ec3d9 PH |
1537 | } |
1538 | else | |
1539 | { | |
1540 | fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n", | |
1541 | EXIM_USERNAME); | |
1542 | exit(EXIT_FAILURE); | |
1543 | } | |
1544 | #endif | |
1545 | ||
1546 | #ifdef EXIM_GROUPNAME | |
1547 | if (!route_findgroup(US EXIM_GROUPNAME, &exim_gid)) | |
1548 | { | |
1549 | fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n", | |
1550 | EXIM_GROUPNAME); | |
1551 | exit(EXIT_FAILURE); | |
1552 | } | |
1553 | #endif | |
1554 | ||
1555 | #ifdef CONFIGURE_OWNERNAME | |
1556 | if (!route_finduser(US CONFIGURE_OWNERNAME, NULL, &config_uid)) | |
1557 | { | |
1558 | fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n", | |
1559 | CONFIGURE_OWNERNAME); | |
1560 | exit(EXIT_FAILURE); | |
1561 | } | |
1562 | #endif | |
1563 | ||
79d4bc3d PP |
1564 | /* We default the system_filter_user to be the Exim run-time user, as a |
1565 | sane non-root value. */ | |
1566 | system_filter_uid = exim_uid; | |
1567 | ||
35edf2ff PH |
1568 | #ifdef CONFIGURE_GROUPNAME |
1569 | if (!route_findgroup(US CONFIGURE_GROUPNAME, &config_gid)) | |
1570 | { | |
1571 | fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n", | |
1572 | CONFIGURE_GROUPNAME); | |
1573 | exit(EXIT_FAILURE); | |
1574 | } | |
1575 | #endif | |
1576 | ||
059ec3d9 PH |
1577 | /* In the Cygwin environment, some initialization needs doing. It is fudged |
1578 | in by means of this macro. */ | |
1579 | ||
1580 | #ifdef OS_INIT | |
1581 | OS_INIT | |
1582 | #endif | |
1583 | ||
1584 | /* Check a field which is patched when we are running Exim within its | |
1585 | testing harness; do a fast initial check, and then the whole thing. */ | |
1586 | ||
1587 | running_in_test_harness = | |
1588 | *running_status == '<' && Ustrcmp(running_status, "<<<testing>>>") == 0; | |
1589 | ||
1590 | /* The C standard says that the equivalent of setlocale(LC_ALL, "C") is obeyed | |
1591 | at the start of a program; however, it seems that some environments do not | |
1592 | follow this. A "strange" locale can affect the formatting of timestamps, so we | |
1593 | make quite sure. */ | |
1594 | ||
1595 | setlocale(LC_ALL, "C"); | |
1596 | ||
1597 | /* Set up the default handler for timing using alarm(). */ | |
1598 | ||
1599 | os_non_restarting_signal(SIGALRM, sigalrm_handler); | |
1600 | ||
1601 | /* Ensure we have a buffer for constructing log entries. Use malloc directly, | |
1602 | because store_malloc writes a log entry on failure. */ | |
1603 | ||
1604 | log_buffer = (uschar *)malloc(LOG_BUFFER_SIZE); | |
1605 | if (log_buffer == NULL) | |
1606 | { | |
1607 | fprintf(stderr, "exim: failed to get store for log buffer\n"); | |
1608 | exit(EXIT_FAILURE); | |
1609 | } | |
1610 | ||
1611 | /* Set log_stderr to stderr, provided that stderr exists. This gets reset to | |
1612 | NULL when the daemon is run and the file is closed. We have to use this | |
1613 | indirection, because some systems don't allow writing to the variable "stderr". | |
1614 | */ | |
1615 | ||
1616 | if (fstat(fileno(stderr), &statbuf) >= 0) log_stderr = stderr; | |
1617 | ||
1618 | /* Arrange for the PCRE regex library to use our store functions. Note that | |
1619 | the normal calls are actually macros that add additional arguments for | |
1620 | debugging purposes so we have to assign specially constructed functions here. | |
1621 | The default is to use store in the stacking pool, but this is overridden in the | |
1622 | regex_must_compile() function. */ | |
1623 | ||
1624 | pcre_malloc = function_store_get; | |
1625 | pcre_free = function_dummy_free; | |
1626 | ||
1627 | /* Ensure there is a big buffer for temporary use in several places. It is put | |
1628 | in malloc store so that it can be freed for enlargement if necessary. */ | |
1629 | ||
1630 | big_buffer = store_malloc(big_buffer_size); | |
1631 | ||
1632 | /* Set up the handler for the data request signal, and set the initial | |
1633 | descriptive text. */ | |
1634 | ||
1635 | set_process_info("initializing"); | |
1636 | os_restarting_signal(SIGUSR1, usr1_handler); | |
1637 | ||
1638 | /* SIGHUP is used to get the daemon to reconfigure. It gets set as appropriate | |
1639 | in the daemon code. For the rest of Exim's uses, we ignore it. */ | |
1640 | ||
1641 | signal(SIGHUP, SIG_IGN); | |
1642 | ||
1643 | /* We don't want to die on pipe errors as the code is written to handle | |
1644 | the write error instead. */ | |
1645 | ||
1646 | signal(SIGPIPE, SIG_IGN); | |
1647 | ||
1648 | /* Under some circumstance on some OS, Exim can get called with SIGCHLD | |
1649 | set to SIG_IGN. This causes subprocesses that complete before the parent | |
1650 | process waits for them not to hang around, so when Exim calls wait(), nothing | |
1651 | is there. The wait() code has been made robust against this, but let's ensure | |
1652 | that SIGCHLD is set to SIG_DFL, because it's tidier to wait and get a process | |
1653 | ending status. We use sigaction rather than plain signal() on those OS where | |
1654 | SA_NOCLDWAIT exists, because we want to be sure it is turned off. (There was a | |
1655 | problem on AIX with this.) */ | |
1656 | ||
1657 | #ifdef SA_NOCLDWAIT | |
1658 | { | |
1659 | struct sigaction act; | |
1660 | act.sa_handler = SIG_DFL; | |
1661 | sigemptyset(&(act.sa_mask)); | |
1662 | act.sa_flags = 0; | |
1663 | sigaction(SIGCHLD, &act, NULL); | |
1664 | } | |
1665 | #else | |
1666 | signal(SIGCHLD, SIG_DFL); | |
1667 | #endif | |
1668 | ||
1669 | /* Save the arguments for use if we re-exec exim as a daemon after receiving | |
1670 | SIGHUP. */ | |
1671 | ||
1672 | sighup_argv = argv; | |
1673 | ||
1674 | /* Set up the version number. Set up the leading 'E' for the external form of | |
1675 | message ids, set the pointer to the internal form, and initialize it to | |
1676 | indicate no message being processed. */ | |
1677 | ||
1678 | version_init(); | |
1679 | message_id_option[0] = '-'; | |
1680 | message_id_external = message_id_option + 1; | |
1681 | message_id_external[0] = 'E'; | |
1682 | message_id = message_id_external + 1; | |
1683 | message_id[0] = 0; | |
1684 | ||
67d175de | 1685 | /* Set the umask to zero so that any files Exim creates using open() are |
2632889e PH |
1686 | created with the modes that it specifies. NOTE: Files created with fopen() have |
1687 | a problem, which was not recognized till rather late (February 2006). With this | |
1688 | umask, such files will be world writeable. (They are all content scanning files | |
1689 | in the spool directory, which isn't world-accessible, so this is not a | |
1690 | disaster, but it's untidy.) I don't want to change this overall setting, | |
1691 | however, because it will interact badly with the open() calls. Instead, there's | |
1692 | now a function called modefopen() that fiddles with the umask while calling | |
1693 | fopen(). */ | |
059ec3d9 | 1694 | |
67d175de | 1695 | (void)umask(0); |
059ec3d9 PH |
1696 | |
1697 | /* Precompile the regular expression for matching a message id. Keep this in | |
1698 | step with the code that generates ids in the accept.c module. We need to do | |
1699 | this here, because the -M options check their arguments for syntactic validity | |
1700 | using mac_ismsgid, which uses this. */ | |
1701 | ||
1702 | regex_ismsgid = | |
1703 | regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", FALSE, TRUE); | |
1704 | ||
a5bd321b | 1705 | /* Precompile the regular expression that is used for matching an SMTP error |
d6a96edc PH |
1706 | code, possibly extended, at the start of an error message. Note that the |
1707 | terminating whitespace character is included. */ | |
a5bd321b PH |
1708 | |
1709 | regex_smtp_code = | |
1710 | regex_must_compile(US"^\\d\\d\\d\\s(?:\\d\\.\\d\\d?\\d?\\.\\d\\d?\\d?\\s)?", | |
1711 | FALSE, TRUE); | |
1712 | ||
a7cbbf50 PP |
1713 | #ifdef WHITELIST_D_MACROS |
1714 | /* Precompile the regular expression used to filter the content of macros | |
1715 | given to -D for permissibility. */ | |
1716 | ||
1717 | regex_whitelisted_macro = | |
1718 | regex_must_compile(US"^[A-Za-z0-9_/.-]*$", FALSE, TRUE); | |
1719 | #endif | |
1720 | ||
1721 | ||
059ec3d9 PH |
1722 | /* If the program is called as "mailq" treat it as equivalent to "exim -bp"; |
1723 | this seems to be a generally accepted convention, since one finds symbolic | |
1724 | links called "mailq" in standard OS configurations. */ | |
1725 | ||
1726 | if ((namelen == 5 && Ustrcmp(argv[0], "mailq") == 0) || | |
1727 | (namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/mailq", 6) == 0)) | |
1728 | { | |
1729 | list_queue = TRUE; | |
1730 | receiving_message = FALSE; | |
1731 | called_as = US"-mailq"; | |
1732 | } | |
1733 | ||
1734 | /* If the program is called as "rmail" treat it as equivalent to | |
1735 | "exim -i -oee", thus allowing UUCP messages to be input using non-SMTP mode, | |
1736 | i.e. preventing a single dot on a line from terminating the message, and | |
1737 | returning with zero return code, even in cases of error (provided an error | |
1738 | message has been sent). */ | |
1739 | ||
1740 | if ((namelen == 5 && Ustrcmp(argv[0], "rmail") == 0) || | |
1741 | (namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/rmail", 6) == 0)) | |
1742 | { | |
1743 | dot_ends = FALSE; | |
1744 | called_as = US"-rmail"; | |
1745 | errors_sender_rc = EXIT_SUCCESS; | |
1746 | } | |
1747 | ||
1748 | /* If the program is called as "rsmtp" treat it as equivalent to "exim -bS"; | |
1749 | this is a smail convention. */ | |
1750 | ||
1751 | if ((namelen == 5 && Ustrcmp(argv[0], "rsmtp") == 0) || | |
1752 | (namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/rsmtp", 6) == 0)) | |
1753 | { | |
1754 | smtp_input = smtp_batched_input = TRUE; | |
1755 | called_as = US"-rsmtp"; | |
1756 | } | |
1757 | ||
1758 | /* If the program is called as "runq" treat it as equivalent to "exim -q"; | |
1759 | this is a smail convention. */ | |
1760 | ||
1761 | if ((namelen == 4 && Ustrcmp(argv[0], "runq") == 0) || | |
1762 | (namelen > 4 && Ustrncmp(argv[0] + namelen - 5, "/runq", 5) == 0)) | |
1763 | { | |
1764 | queue_interval = 0; | |
1765 | receiving_message = FALSE; | |
1766 | called_as = US"-runq"; | |
1767 | } | |
1768 | ||
1769 | /* If the program is called as "newaliases" treat it as equivalent to | |
1770 | "exim -bi"; this is a sendmail convention. */ | |
1771 | ||
1772 | if ((namelen == 10 && Ustrcmp(argv[0], "newaliases") == 0) || | |
1773 | (namelen > 10 && Ustrncmp(argv[0] + namelen - 11, "/newaliases", 11) == 0)) | |
1774 | { | |
1775 | bi_option = TRUE; | |
1776 | receiving_message = FALSE; | |
1777 | called_as = US"-newaliases"; | |
1778 | } | |
1779 | ||
1780 | /* Save the original effective uid for a couple of uses later. It should | |
1781 | normally be root, but in some esoteric environments it may not be. */ | |
1782 | ||
1783 | original_euid = geteuid(); | |
1784 | ||
1785 | /* Get the real uid and gid. If the caller is root, force the effective uid/gid | |
1786 | to be the same as the real ones. This makes a difference only if Exim is setuid | |
1787 | (or setgid) to something other than root, which could be the case in some | |
1788 | special configurations. */ | |
1789 | ||
1790 | real_uid = getuid(); | |
1791 | real_gid = getgid(); | |
1792 | ||
1793 | if (real_uid == root_uid) | |
1794 | { | |
1670ef10 PP |
1795 | rv = setgid(real_gid); |
1796 | if (rv) | |
1797 | { | |
1798 | fprintf(stderr, "exim: setgid(%ld) failed: %s\n", | |
1799 | (long int)real_gid, strerror(errno)); | |
1800 | exit(EXIT_FAILURE); | |
1801 | } | |
1802 | rv = setuid(real_uid); | |
1803 | if (rv) | |
1804 | { | |
1805 | fprintf(stderr, "exim: setuid(%ld) failed: %s\n", | |
1806 | (long int)real_uid, strerror(errno)); | |
1807 | exit(EXIT_FAILURE); | |
1808 | } | |
059ec3d9 PH |
1809 | } |
1810 | ||
1811 | /* If neither the original real uid nor the original euid was root, Exim is | |
1812 | running in an unprivileged state. */ | |
1813 | ||
1814 | unprivileged = (real_uid != root_uid && original_euid != root_uid); | |
1815 | ||
059ec3d9 PH |
1816 | /* Scan the program's arguments. Some can be dealt with right away; others are |
1817 | simply recorded for checking and handling afterwards. Do a high-level switch | |
1818 | on the second character (the one after '-'), to save some effort. */ | |
1819 | ||
1820 | for (i = 1; i < argc; i++) | |
1821 | { | |
1822 | BOOL badarg = FALSE; | |
1823 | uschar *arg = argv[i]; | |
1824 | uschar *argrest; | |
1825 | int switchchar; | |
1826 | ||
1827 | /* An argument not starting with '-' is the start of a recipients list; | |
1828 | break out of the options-scanning loop. */ | |
1829 | ||
1830 | if (arg[0] != '-') | |
1831 | { | |
1832 | recipients_arg = i; | |
1833 | break; | |
1834 | } | |
1835 | ||
1836 | /* An option consistion of -- terminates the options */ | |
1837 | ||
1838 | if (Ustrcmp(arg, "--") == 0) | |
1839 | { | |
1840 | recipients_arg = i + 1; | |
1841 | break; | |
1842 | } | |
1843 | ||
1844 | /* Handle flagged options */ | |
1845 | ||
1846 | switchchar = arg[1]; | |
1847 | argrest = arg+2; | |
1848 | ||
1849 | /* Make all -ex options synonymous with -oex arguments, since that | |
1850 | is assumed by various callers. Also make -qR options synonymous with -R | |
1851 | options, as that seems to be required as well. Allow for -qqR too, and | |
1852 | the same for -S options. */ | |
1853 | ||
1854 | if (Ustrncmp(arg+1, "oe", 2) == 0 || | |
1855 | Ustrncmp(arg+1, "qR", 2) == 0 || | |
1856 | Ustrncmp(arg+1, "qS", 2) == 0) | |
1857 | { | |
1858 | switchchar = arg[2]; | |
1859 | argrest++; | |
1860 | } | |
1861 | else if (Ustrncmp(arg+1, "qqR", 3) == 0 || Ustrncmp(arg+1, "qqS", 3) == 0) | |
1862 | { | |
1863 | switchchar = arg[3]; | |
1864 | argrest += 2; | |
1865 | queue_2stage = TRUE; | |
1866 | } | |
1867 | ||
1868 | /* Make -r synonymous with -f, since it is a documented alias */ | |
1869 | ||
1870 | else if (arg[1] == 'r') switchchar = 'f'; | |
1871 | ||
1872 | /* Make -ov synonymous with -v */ | |
1873 | ||
1874 | else if (Ustrcmp(arg, "-ov") == 0) | |
1875 | { | |
1876 | switchchar = 'v'; | |
1877 | argrest++; | |
1878 | } | |
1879 | ||
4b2241d2 PP |
1880 | /* deal with --option_aliases */ |
1881 | else if (switchchar == '-') | |
1882 | { | |
1883 | if (Ustrcmp(argrest, "help") == 0) | |
1884 | { | |
1885 | usage_wanted = TRUE; | |
1886 | break; | |
1887 | } | |
1888 | else if (Ustrcmp(argrest, "version") == 0) | |
1889 | { | |
1890 | switchchar = 'b'; | |
73a46702 | 1891 | argrest = US"V"; |
4b2241d2 PP |
1892 | } |
1893 | } | |
1894 | ||
059ec3d9 PH |
1895 | /* High-level switch on active initial letter */ |
1896 | ||
1897 | switch(switchchar) | |
1898 | { | |
a3fb9793 PP |
1899 | |
1900 | /* sendmail uses -Ac and -Am to control which .cf file is used; | |
1901 | we ignore them. */ | |
1902 | case 'A': | |
1903 | if (*argrest == '\0') { badarg = TRUE; break; } | |
1904 | else | |
1905 | { | |
1906 | BOOL ignore = FALSE; | |
1907 | switch (*argrest) | |
1908 | { | |
1909 | case 'c': | |
1910 | case 'm': | |
1911 | if (*(argrest + 1) == '\0') | |
1912 | ignore = TRUE; | |
1913 | break; | |
1914 | } | |
1915 | if (!ignore) { badarg = TRUE; break; } | |
1916 | } | |
1917 | break; | |
1918 | ||
059ec3d9 PH |
1919 | /* -Btype is a sendmail option for 7bit/8bit setting. Exim is 8-bit clean |
1920 | so has no need of it. */ | |
1921 | ||
1922 | case 'B': | |
1923 | if (*argrest == 0) i++; /* Skip over the type */ | |
1924 | break; | |
1925 | ||
1926 | ||
1927 | case 'b': | |
1928 | receiving_message = FALSE; /* Reset TRUE for -bm, -bS, -bs below */ | |
1929 | ||
1930 | /* -bd: Run in daemon mode, awaiting SMTP connections. | |
1931 | -bdf: Ditto, but in the foreground. | |
1932 | */ | |
1933 | ||
1934 | if (*argrest == 'd') | |
1935 | { | |
1936 | daemon_listen = TRUE; | |
1937 | if (*(++argrest) == 'f') background_daemon = FALSE; | |
1938 | else if (*argrest != 0) { badarg = TRUE; break; } | |
1939 | } | |
1940 | ||
328895cc PH |
1941 | /* -be: Run in expansion test mode |
1942 | -bem: Ditto, but read a message from a file first | |
1943 | */ | |
059ec3d9 PH |
1944 | |
1945 | else if (*argrest == 'e') | |
328895cc | 1946 | { |
059ec3d9 | 1947 | expansion_test = checking = TRUE; |
328895cc PH |
1948 | if (argrest[1] == 'm') |
1949 | { | |
1950 | if (++i >= argc) { badarg = TRUE; break; } | |
1951 | expansion_test_message = argv[i]; | |
1952 | argrest++; | |
1953 | } | |
1954 | if (argrest[1] != 0) { badarg = TRUE; break; } | |
1955 | } | |
059ec3d9 | 1956 | |
f05da2e8 PH |
1957 | /* -bF: Run system filter test */ |
1958 | ||
1959 | else if (*argrest == 'F') | |
1960 | { | |
1961 | filter_test |= FTEST_SYSTEM; | |
1962 | if (*(++argrest) != 0) { badarg = TRUE; break; } | |
1963 | if (++i < argc) filter_test_sfile = argv[i]; else | |
1964 | { | |
1965 | fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]); | |
1966 | exit(EXIT_FAILURE); | |
1967 | } | |
1968 | } | |
1969 | ||
1970 | /* -bf: Run user filter test | |
059ec3d9 PH |
1971 | -bfd: Set domain for filter testing |
1972 | -bfl: Set local part for filter testing | |
1973 | -bfp: Set prefix for filter testing | |
1974 | -bfs: Set suffix for filter testing | |
1975 | */ | |
1976 | ||
f05da2e8 | 1977 | else if (*argrest == 'f') |
059ec3d9 | 1978 | { |
f05da2e8 | 1979 | if (*(++argrest) == 0) |
059ec3d9 | 1980 | { |
f05da2e8 PH |
1981 | filter_test |= FTEST_USER; |
1982 | if (++i < argc) filter_test_ufile = argv[i]; else | |
059ec3d9 PH |
1983 | { |
1984 | fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]); | |
1985 | exit(EXIT_FAILURE); | |
1986 | } | |
1987 | } | |
1988 | else | |
1989 | { | |
1990 | if (++i >= argc) | |
1991 | { | |
1992 | fprintf(stderr, "exim: string expected after %s\n", arg); | |
1993 | exit(EXIT_FAILURE); | |
1994 | } | |
1995 | if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i]; | |
1996 | else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i]; | |
1997 | else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i]; | |
1998 | else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = argv[i]; | |
1999 | else { badarg = TRUE; break; } | |
2000 | } | |
2001 | } | |
2002 | ||
2003 | /* -bh: Host checking - an IP address must follow. */ | |
2004 | ||
2005 | else if (Ustrcmp(argrest, "h") == 0 || Ustrcmp(argrest, "hc") == 0) | |
2006 | { | |
2007 | if (++i >= argc) { badarg = TRUE; break; } | |
2008 | sender_host_address = argv[i]; | |
2009 | host_checking = checking = log_testing_mode = TRUE; | |
2010 | host_checking_callout = argrest[1] == 'c'; | |
2011 | } | |
2012 | ||
2013 | /* -bi: This option is used by sendmail to initialize *the* alias file, | |
2014 | though it has the -oA option to specify a different file. Exim has no | |
2015 | concept of *the* alias file, but since Sun's YP make script calls | |
2016 | sendmail this way, some support must be provided. */ | |
2017 | ||
2018 | else if (Ustrcmp(argrest, "i") == 0) bi_option = TRUE; | |
2019 | ||
98a90c36 PP |
2020 | /* -bI: provide information, of the type to follow after a colon. |
2021 | This is an Exim flag. */ | |
2022 | ||
2023 | else if (argrest[0] == 'I' && Ustrlen(argrest) >= 2 && argrest[1] == ':') | |
2024 | { | |
2025 | uschar *p = &argrest[2]; | |
2026 | info_flag = CMDINFO_HELP; | |
2027 | if (Ustrlen(p)) | |
2028 | { | |
2029 | if (strcmpic(p, CUS"sieve") == 0) | |
2030 | { | |
2031 | info_flag = CMDINFO_SIEVE; | |
2032 | info_stdout = TRUE; | |
2033 | } | |
36a3ae5f PP |
2034 | else if (strcmpic(p, CUS"dscp") == 0) |
2035 | { | |
2036 | info_flag = CMDINFO_DSCP; | |
2037 | info_stdout = TRUE; | |
2038 | } | |
98a90c36 PP |
2039 | else if (strcmpic(p, CUS"help") == 0) |
2040 | { | |
2041 | info_stdout = TRUE; | |
2042 | } | |
2043 | } | |
2044 | } | |
2045 | ||
059ec3d9 PH |
2046 | /* -bm: Accept and deliver message - the default option. Reinstate |
2047 | receiving_message, which got turned off for all -b options. */ | |
2048 | ||
2049 | else if (Ustrcmp(argrest, "m") == 0) receiving_message = TRUE; | |
2050 | ||
8544e77a PP |
2051 | /* -bmalware: test the filename given for malware */ |
2052 | ||
2053 | else if (Ustrcmp(argrest, "malware") == 0) | |
2054 | { | |
2055 | if (++i >= argc) { badarg = TRUE; break; } | |
2056 | malware_test_file = argv[i]; | |
2057 | } | |
2058 | ||
059ec3d9 PH |
2059 | /* -bnq: For locally originating messages, do not qualify unqualified |
2060 | addresses. In the envelope, this causes errors; in header lines they | |
2061 | just get left. */ | |
2062 | ||
2063 | else if (Ustrcmp(argrest, "nq") == 0) | |
2064 | { | |
2065 | allow_unqualified_sender = FALSE; | |
2066 | allow_unqualified_recipient = FALSE; | |
2067 | } | |
2068 | ||
2069 | /* -bpxx: List the contents of the mail queue, in various forms. If | |
2070 | the option is -bpc, just a queue count is needed. Otherwise, if the | |
2071 | first letter after p is r, then order is random. */ | |
2072 | ||
2073 | else if (*argrest == 'p') | |
2074 | { | |
2075 | if (*(++argrest) == 'c') | |
2076 | { | |
2077 | count_queue = TRUE; | |
2078 | if (*(++argrest) != 0) badarg = TRUE; | |
2079 | break; | |
2080 | } | |
2081 | ||
2082 | if (*argrest == 'r') | |
2083 | { | |
2084 | list_queue_option = 8; | |
2085 | argrest++; | |
2086 | } | |
2087 | else list_queue_option = 0; | |
2088 | ||
2089 | list_queue = TRUE; | |
2090 | ||
2091 | /* -bp: List the contents of the mail queue, top-level only */ | |
2092 | ||
2093 | if (*argrest == 0) {} | |
2094 | ||
2095 | /* -bpu: List the contents of the mail queue, top-level undelivered */ | |
2096 | ||
2097 | else if (Ustrcmp(argrest, "u") == 0) list_queue_option += 1; | |
2098 | ||
2099 | /* -bpa: List the contents of the mail queue, including all delivered */ | |
2100 | ||
2101 | else if (Ustrcmp(argrest, "a") == 0) list_queue_option += 2; | |
2102 | ||
2103 | /* Unknown after -bp[r] */ | |
2104 | ||
2105 | else | |
2106 | { | |
2107 | badarg = TRUE; | |
2108 | break; | |
2109 | } | |
2110 | } | |
2111 | ||
2112 | ||
2113 | /* -bP: List the configuration variables given as the address list. | |
2114 | Force -v, so configuration errors get displayed. */ | |
2115 | ||
2116 | else if (Ustrcmp(argrest, "P") == 0) | |
2117 | { | |
2118 | list_options = TRUE; | |
2119 | debug_selector |= D_v; | |
2120 | debug_file = stderr; | |
2121 | } | |
2122 | ||
2123 | /* -brt: Test retry configuration lookup */ | |
2124 | ||
2125 | else if (Ustrcmp(argrest, "rt") == 0) | |
2126 | { | |
2127 | test_retry_arg = i + 1; | |
2128 | goto END_ARG; | |
2129 | } | |
2130 | ||
2131 | /* -brw: Test rewrite configuration */ | |
2132 | ||
2133 | else if (Ustrcmp(argrest, "rw") == 0) | |
2134 | { | |
2135 | test_rewrite_arg = i + 1; | |
2136 | goto END_ARG; | |
2137 | } | |
2138 | ||
2139 | /* -bS: Read SMTP commands on standard input, but produce no replies - | |
2140 | all errors are reported by sending messages. */ | |
2141 | ||
2142 | else if (Ustrcmp(argrest, "S") == 0) | |
2143 | smtp_input = smtp_batched_input = receiving_message = TRUE; | |
2144 | ||
2145 | /* -bs: Read SMTP commands on standard input and produce SMTP replies | |
2146 | on standard output. */ | |
2147 | ||
2148 | else if (Ustrcmp(argrest, "s") == 0) smtp_input = receiving_message = TRUE; | |
2149 | ||
2150 | /* -bt: address testing mode */ | |
2151 | ||
2152 | else if (Ustrcmp(argrest, "t") == 0) | |
2153 | address_test_mode = checking = log_testing_mode = TRUE; | |
2154 | ||
2155 | /* -bv: verify addresses */ | |
2156 | ||
2157 | else if (Ustrcmp(argrest, "v") == 0) | |
2158 | verify_address_mode = checking = log_testing_mode = TRUE; | |
2159 | ||
2160 | /* -bvs: verify sender addresses */ | |
2161 | ||
2162 | else if (Ustrcmp(argrest, "vs") == 0) | |
2163 | { | |
2164 | verify_address_mode = checking = log_testing_mode = TRUE; | |
2165 | verify_as_sender = TRUE; | |
2166 | } | |
2167 | ||
2168 | /* -bV: Print version string and support details */ | |
2169 | ||
2170 | else if (Ustrcmp(argrest, "V") == 0) | |
2171 | { | |
2172 | printf("Exim version %s #%s built %s\n", version_string, | |
2173 | version_cnumber, version_date); | |
2174 | printf("%s\n", CS version_copyright); | |
2175 | version_printed = TRUE; | |
2176 | show_whats_supported(stdout); | |
2177 | } | |
2178 | ||
9ee44efb PP |
2179 | /* -bw: inetd wait mode, accept a listening socket as stdin */ |
2180 | ||
2181 | else if (*argrest == 'w') | |
2182 | { | |
2183 | inetd_wait_mode = TRUE; | |
2184 | background_daemon = FALSE; | |
2185 | daemon_listen = TRUE; | |
2186 | if (*(++argrest) != '\0') | |
2187 | { | |
2188 | inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE); | |
2189 | if (inetd_wait_timeout <= 0) | |
2190 | { | |
2191 | fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]); | |
2192 | exit(EXIT_FAILURE); | |
2193 | } | |
2194 | } | |
2195 | } | |
2196 | ||
059ec3d9 PH |
2197 | else badarg = TRUE; |
2198 | break; | |
2199 | ||
2200 | ||
2201 | /* -C: change configuration file list; ignore if it isn't really | |
2202 | a change! Enforce a prefix check if required. */ | |
2203 | ||
2204 | case 'C': | |
2205 | if (*argrest == 0) | |
2206 | { | |
2207 | if(++i < argc) argrest = argv[i]; else | |
2208 | { badarg = TRUE; break; } | |
2209 | } | |
2210 | if (Ustrcmp(config_main_filelist, argrest) != 0) | |
2211 | { | |
2212 | #ifdef ALT_CONFIG_PREFIX | |
2213 | int sep = 0; | |
2214 | int len = Ustrlen(ALT_CONFIG_PREFIX); | |
2215 | uschar *list = argrest; | |
2216 | uschar *filename; | |
2217 | while((filename = string_nextinlist(&list, &sep, big_buffer, | |
2218 | big_buffer_size)) != NULL) | |
2219 | { | |
2220 | if ((Ustrlen(filename) < len || | |
2221 | Ustrncmp(filename, ALT_CONFIG_PREFIX, len) != 0 || | |
2222 | Ustrstr(filename, "/../") != NULL) && | |
2223 | (Ustrcmp(filename, "/dev/null") != 0 || real_uid != root_uid)) | |
2224 | { | |
2225 | fprintf(stderr, "-C Permission denied\n"); | |
2226 | exit(EXIT_FAILURE); | |
2227 | } | |
2228 | } | |
2229 | #endif | |
261dc43e DW |
2230 | if (real_uid != root_uid) |
2231 | { | |
90b6341f | 2232 | #ifdef TRUSTED_CONFIG_LIST |
261dc43e | 2233 | |
90b6341f DW |
2234 | if (real_uid != exim_uid |
2235 | #ifdef CONFIGURE_OWNER | |
2236 | && real_uid != config_uid | |
2237 | #endif | |
2238 | ) | |
261dc43e DW |
2239 | trusted_config = FALSE; |
2240 | else | |
2241 | { | |
90b6341f | 2242 | FILE *trust_list = Ufopen(TRUSTED_CONFIG_LIST, "rb"); |
261dc43e DW |
2243 | if (trust_list) |
2244 | { | |
2245 | struct stat statbuf; | |
2246 | ||
2247 | if (fstat(fileno(trust_list), &statbuf) != 0 || | |
2248 | (statbuf.st_uid != root_uid /* owner not root */ | |
2249 | #ifdef CONFIGURE_OWNER | |
2250 | && statbuf.st_uid != config_uid /* owner not the special one */ | |
2251 | #endif | |
2252 | ) || /* or */ | |
2253 | (statbuf.st_gid != root_gid /* group not root */ | |
2254 | #ifdef CONFIGURE_GROUP | |
2255 | && statbuf.st_gid != config_gid /* group not the special one */ | |
2256 | #endif | |
2257 | && (statbuf.st_mode & 020) != 0 /* group writeable */ | |
2258 | ) || /* or */ | |
2259 | (statbuf.st_mode & 2) != 0) /* world writeable */ | |
2260 | { | |
2261 | trusted_config = FALSE; | |
2262 | fclose(trust_list); | |
2263 | } | |
2264 | else | |
2265 | { | |
2266 | /* Well, the trust list at least is up to scratch... */ | |
2267 | void *reset_point = store_get(0); | |
90b6341f DW |
2268 | uschar *trusted_configs[32]; |
2269 | int nr_configs = 0; | |
261dc43e DW |
2270 | int i = 0; |
2271 | ||
2272 | while (Ufgets(big_buffer, big_buffer_size, trust_list)) | |
2273 | { | |
2274 | uschar *start = big_buffer, *nl; | |
2275 | while (*start && isspace(*start)) | |
2276 | start++; | |
1e83d68b | 2277 | if (*start != '/') |
261dc43e DW |
2278 | continue; |
2279 | nl = Ustrchr(start, '\n'); | |
2280 | if (nl) | |
2281 | *nl = 0; | |
90b6341f DW |
2282 | trusted_configs[nr_configs++] = string_copy(start); |
2283 | if (nr_configs == 32) | |
261dc43e DW |
2284 | break; |
2285 | } | |
2286 | fclose(trust_list); | |
2287 | ||
90b6341f | 2288 | if (nr_configs) |
261dc43e DW |
2289 | { |
2290 | int sep = 0; | |
2291 | uschar *list = argrest; | |
2292 | uschar *filename; | |
2293 | while (trusted_config && (filename = string_nextinlist(&list, | |
2294 | &sep, big_buffer, big_buffer_size)) != NULL) | |
2295 | { | |
90b6341f | 2296 | for (i=0; i < nr_configs; i++) |
261dc43e | 2297 | { |
90b6341f | 2298 | if (Ustrcmp(filename, trusted_configs[i]) == 0) |
261dc43e DW |
2299 | break; |
2300 | } | |
90b6341f | 2301 | if (i == nr_configs) |
261dc43e DW |
2302 | { |
2303 | trusted_config = FALSE; | |
2304 | break; | |
2305 | } | |
2306 | } | |
1e83d68b | 2307 | store_reset(reset_point); |
261dc43e DW |
2308 | } |
2309 | else | |
2310 | { | |
2311 | /* No valid prefixes found in trust_list file. */ | |
2312 | trusted_config = FALSE; | |
2313 | } | |
2314 | } | |
2315 | } | |
2316 | else | |
2317 | { | |
2318 | /* Could not open trust_list file. */ | |
2319 | trusted_config = FALSE; | |
2320 | } | |
2321 | } | |
2322 | #else | |
2323 | /* Not root; don't trust config */ | |
2324 | trusted_config = FALSE; | |
2325 | #endif | |
2326 | } | |
059ec3d9 PH |
2327 | |
2328 | config_main_filelist = argrest; | |
2329 | config_changed = TRUE; | |
2330 | } | |
2331 | break; | |
2332 | ||
2333 | ||
2334 | /* -D: set up a macro definition */ | |
2335 | ||
2336 | case 'D': | |
2337 | #ifdef DISABLE_D_OPTION | |
2338 | fprintf(stderr, "exim: -D is not available in this Exim binary\n"); | |
2339 | exit(EXIT_FAILURE); | |
2340 | #else | |
2341 | { | |
2342 | int ptr = 0; | |
2343 | macro_item *mlast = NULL; | |
2344 | macro_item *m; | |
2345 | uschar name[24]; | |
2346 | uschar *s = argrest; | |
2347 | ||
2348 | while (isspace(*s)) s++; | |
2349 | ||
2350 | if (*s < 'A' || *s > 'Z') | |
2351 | { | |
2352 | fprintf(stderr, "exim: macro name set by -D must start with " | |
2353 | "an upper case letter\n"); | |
2354 | exit(EXIT_FAILURE); | |
2355 | } | |
2356 | ||
2357 | while (isalnum(*s) || *s == '_') | |
2358 | { | |
2359 | if (ptr < sizeof(name)-1) name[ptr++] = *s; | |
2360 | s++; | |
2361 | } | |
2362 | name[ptr] = 0; | |
2363 | if (ptr == 0) { badarg = TRUE; break; } | |
2364 | while (isspace(*s)) s++; | |
2365 | if (*s != 0) | |
2366 | { | |
2367 | if (*s++ != '=') { badarg = TRUE; break; } | |
2368 | while (isspace(*s)) s++; | |
2369 | } | |
2370 | ||
2371 | for (m = macros; m != NULL; m = m->next) | |
2372 | { | |
2373 | if (Ustrcmp(m->name, name) == 0) | |
2374 | { | |
2375 | fprintf(stderr, "exim: duplicated -D in command line\n"); | |
2376 | exit(EXIT_FAILURE); | |
2377 | } | |
2378 | mlast = m; | |
2379 | } | |
2380 | ||
2381 | m = store_get(sizeof(macro_item) + Ustrlen(name)); | |
2382 | m->next = NULL; | |
2383 | m->command_line = TRUE; | |
2384 | if (mlast == NULL) macros = m; else mlast->next = m; | |
2385 | Ustrcpy(m->name, name); | |
2386 | m->replacement = string_copy(s); | |
2387 | ||
2388 | if (clmacro_count >= MAX_CLMACROS) | |
2389 | { | |
2390 | fprintf(stderr, "exim: too many -D options on command line\n"); | |
2391 | exit(EXIT_FAILURE); | |
2392 | } | |
2393 | clmacros[clmacro_count++] = string_sprintf("-D%s=%s", m->name, | |
2394 | m->replacement); | |
2395 | } | |
2396 | #endif | |
2397 | break; | |
2398 | ||
2399 | /* -d: Set debug level (see also -v below) or set the drop_cr option. | |
8e669ac1 | 2400 | The latter is now a no-op, retained for compatibility only. If -dd is used, |
3d235903 | 2401 | debugging subprocesses of the daemon is disabled. */ |
059ec3d9 PH |
2402 | |
2403 | case 'd': | |
2404 | if (Ustrcmp(argrest, "ropcr") == 0) | |
2405 | { | |
2406 | /* drop_cr = TRUE; */ | |
2407 | } | |
2408 | ||
2409 | /* Use an intermediate variable so that we don't set debugging while | |
2410 | decoding the debugging bits. */ | |
2411 | ||
2412 | else | |
2413 | { | |
2414 | unsigned int selector = D_default; | |
2415 | debug_selector = 0; | |
2416 | debug_file = NULL; | |
3d235903 PH |
2417 | if (*argrest == 'd') |
2418 | { | |
2419 | debug_daemon = TRUE; | |
2420 | argrest++; | |
2421 | } | |
059ec3d9 | 2422 | if (*argrest != 0) |
1fe64dcc | 2423 | decode_bits(&selector, NULL, D_memory, 0, argrest, debug_options, |
ed7f7860 | 2424 | debug_options_count, US"debug", 0); |
059ec3d9 PH |
2425 | debug_selector = selector; |
2426 | } | |
2427 | break; | |
2428 | ||
2429 | ||
2430 | /* -E: This is a local error message. This option is not intended for | |
2431 | external use at all, but is not restricted to trusted callers because it | |
2432 | does no harm (just suppresses certain error messages) and if Exim is run | |
2433 | not setuid root it won't always be trusted when it generates error | |
2434 | messages using this option. If there is a message id following -E, point | |
2435 | message_reference at it, for logging. */ | |
2436 | ||
2437 | case 'E': | |
2438 | local_error_message = TRUE; | |
2439 | if (mac_ismsgid(argrest)) message_reference = argrest; | |
2440 | break; | |
2441 | ||
2442 | ||
2443 | /* -ex: The vacation program calls sendmail with the undocumented "-eq" | |
2444 | option, so it looks as if historically the -oex options are also callable | |
2445 | without the leading -o. So we have to accept them. Before the switch, | |
2446 | anything starting -oe has been converted to -e. Exim does not support all | |
2447 | of the sendmail error options. */ | |
2448 | ||
2449 | case 'e': | |
2450 | if (Ustrcmp(argrest, "e") == 0) | |
2451 | { | |
2452 | arg_error_handling = ERRORS_SENDER; | |
2453 | errors_sender_rc = EXIT_SUCCESS; | |
2454 | } | |
2455 | else if (Ustrcmp(argrest, "m") == 0) arg_error_handling = ERRORS_SENDER; | |
2456 | else if (Ustrcmp(argrest, "p") == 0) arg_error_handling = ERRORS_STDERR; | |
2457 | else if (Ustrcmp(argrest, "q") == 0) arg_error_handling = ERRORS_STDERR; | |
2458 | else if (Ustrcmp(argrest, "w") == 0) arg_error_handling = ERRORS_SENDER; | |
2459 | else badarg = TRUE; | |
2460 | break; | |
2461 | ||
2462 | ||
2463 | /* -F: Set sender's full name, used instead of the gecos entry from | |
2464 | the password file. Since users can usually alter their gecos entries, | |
2465 | there's no security involved in using this instead. The data can follow | |
2466 | the -F or be in the next argument. */ | |
2467 | ||
2468 | case 'F': | |
2469 | if (*argrest == 0) | |
2470 | { | |
2471 | if(++i < argc) argrest = argv[i]; else | |
2472 | { badarg = TRUE; break; } | |
2473 | } | |
2474 | originator_name = argrest; | |
2fe1a124 | 2475 | sender_name_forced = TRUE; |
059ec3d9 PH |
2476 | break; |
2477 | ||
2478 | ||
2479 | /* -f: Set sender's address - this value is only actually used if Exim is | |
2480 | run by a trusted user, or if untrusted_set_sender is set and matches the | |
2481 | address, except that the null address can always be set by any user. The | |
2482 | test for this happens later, when the value given here is ignored when not | |
2483 | permitted. For an untrusted user, the actual sender is still put in Sender: | |
2484 | if it doesn't match the From: header (unless no_local_from_check is set). | |
2485 | The data can follow the -f or be in the next argument. The -r switch is an | |
2486 | obsolete form of -f but since there appear to be programs out there that | |
2487 | use anything that sendmail has ever supported, better accept it - the | |
2488 | synonymizing is done before the switch above. | |
2489 | ||
2490 | At this stage, we must allow domain literal addresses, because we don't | |
2491 | know what the setting of allow_domain_literals is yet. Ditto for trailing | |
2492 | dots and strip_trailing_dot. */ | |
2493 | ||
2494 | case 'f': | |
2495 | { | |
2496 | int start, end; | |
2497 | uschar *errmess; | |
2498 | if (*argrest == 0) | |
2499 | { | |
2500 | if (i+1 < argc) argrest = argv[++i]; else | |
2501 | { badarg = TRUE; break; } | |
2502 | } | |
2503 | if (*argrest == 0) | |
2504 | { | |
2505 | sender_address = string_sprintf(""); /* Ensure writeable memory */ | |
2506 | } | |
2507 | else | |
2508 | { | |
2509 | uschar *temp = argrest + Ustrlen(argrest) - 1; | |
2510 | while (temp >= argrest && isspace(*temp)) temp--; | |
2511 | if (temp >= argrest && *temp == '.') f_end_dot = TRUE; | |
2512 | allow_domain_literals = TRUE; | |
2513 | strip_trailing_dot = TRUE; | |
2514 | sender_address = parse_extract_address(argrest, &errmess, &start, &end, | |
2515 | &sender_address_domain, TRUE); | |
2516 | allow_domain_literals = FALSE; | |
2517 | strip_trailing_dot = FALSE; | |
2518 | if (sender_address == NULL) | |
2519 | { | |
2520 | fprintf(stderr, "exim: bad -f address \"%s\": %s\n", argrest, errmess); | |
2521 | return EXIT_FAILURE; | |
2522 | } | |
2523 | } | |
2524 | sender_address_forced = TRUE; | |
2525 | } | |
2526 | break; | |
2527 | ||
a3fb9793 | 2528 | /* -G: sendmail invocation to specify that it's a gateway submission and |
f4ee74ac PP |
2529 | sendmail may complain about problems instead of fixing them. |
2530 | We make it equivalent to an ACL "control = suppress_local_fixups" and do | |
2531 | not at this time complain about problems. */ | |
059ec3d9 PH |
2532 | |
2533 | case 'G': | |
f4ee74ac | 2534 | flag_G = TRUE; |
059ec3d9 PH |
2535 | break; |
2536 | ||
2537 | /* -h: Set the hop count for an incoming message. Exim does not currently | |
2538 | support this; it always computes it by counting the Received: headers. | |
2539 | To put it in will require a change to the spool header file format. */ | |
2540 | ||
2541 | case 'h': | |
2542 | if (*argrest == 0) | |
2543 | { | |
2544 | if(++i < argc) argrest = argv[i]; else | |
2545 | { badarg = TRUE; break; } | |
2546 | } | |
2547 | if (!isdigit(*argrest)) badarg = TRUE; | |
2548 | break; | |
2549 | ||
2550 | ||
2551 | /* -i: Set flag so dot doesn't end non-SMTP input (same as -oi, seems | |
2552 | not to be documented for sendmail but mailx (at least) uses it) */ | |
2553 | ||
2554 | case 'i': | |
2555 | if (*argrest == 0) dot_ends = FALSE; else badarg = TRUE; | |
2556 | break; | |
2557 | ||
2558 | ||
a3fb9793 PP |
2559 | /* -L: set the identifier used for syslog; equivalent to setting |
2560 | syslog_processname in the config file, but needs to be an admin option. */ | |
2561 | ||
2562 | case 'L': | |
2563 | if (*argrest == '\0') | |
2564 | { | |
2565 | if(++i < argc) argrest = argv[i]; else | |
2566 | { badarg = TRUE; break; } | |
2567 | } | |
2568 | sz = Ustrlen(argrest); | |
2569 | if (sz > 32) | |
2570 | { | |
2571 | fprintf(stderr, "exim: the -L syslog name is too long: \"%s\"\n", argrest); | |
2572 | return EXIT_FAILURE; | |
2573 | } | |
2574 | if (sz < 1) | |
2575 | { | |
2576 | fprintf(stderr, "exim: the -L syslog name is too short\n"); | |
2577 | return EXIT_FAILURE; | |
2578 | } | |
2579 | cmdline_syslog_name = argrest; | |
2580 | break; | |
2581 | ||
059ec3d9 PH |
2582 | case 'M': |
2583 | receiving_message = FALSE; | |
2584 | ||
2585 | /* -MC: continue delivery of another message via an existing open | |
2586 | file descriptor. This option is used for an internal call by the | |
2587 | smtp transport when there is a pending message waiting to go to an | |
2588 | address to which it has got a connection. Five subsequent arguments are | |
2589 | required: transport name, host name, IP address, sequence number, and | |
2590 | message_id. Transports may decline to create new processes if the sequence | |
2591 | number gets too big. The channel is stdin. This (-MC) must be the last | |
2592 | argument. There's a subsequent check that the real-uid is privileged. | |
2593 | ||
2594 | If we are running in the test harness. delay for a bit, to let the process | |
2595 | that set this one up complete. This makes for repeatability of the logging, | |
2596 | etc. output. */ | |
2597 | ||
2598 | if (Ustrcmp(argrest, "C") == 0) | |
2599 | { | |
41c7c167 PH |
2600 | union sockaddr_46 interface_sock; |
2601 | EXIM_SOCKLEN_T size = sizeof(interface_sock); | |
2602 | ||
059ec3d9 PH |
2603 | if (argc != i + 6) |
2604 | { | |
2605 | fprintf(stderr, "exim: too many or too few arguments after -MC\n"); | |
2606 | return EXIT_FAILURE; | |
2607 | } | |
2608 | ||
2609 | if (msg_action_arg >= 0) | |
2610 | { | |
2611 | fprintf(stderr, "exim: incompatible arguments\n"); | |
2612 | return EXIT_FAILURE; | |
2613 | } | |
2614 | ||
2615 | continue_transport = argv[++i]; | |
2616 | continue_hostname = argv[++i]; | |
2617 | continue_host_address = argv[++i]; | |
2618 | continue_sequence = Uatoi(argv[++i]); | |
2619 | msg_action = MSG_DELIVER; | |
2620 | msg_action_arg = ++i; | |
2621 | forced_delivery = TRUE; | |
2622 | queue_run_pid = passed_qr_pid; | |
2623 | queue_run_pipe = passed_qr_pipe; | |
2624 | ||
2625 | if (!mac_ismsgid(argv[i])) | |
2626 | { | |
2627 | fprintf(stderr, "exim: malformed message id %s after -MC option\n", | |
2628 | argv[i]); | |
2629 | return EXIT_FAILURE; | |
2630 | } | |
2631 | ||
41c7c167 PH |
2632 | /* Set up $sending_ip_address and $sending_port */ |
2633 | ||
2634 | if (getsockname(fileno(stdin), (struct sockaddr *)(&interface_sock), | |
2635 | &size) == 0) | |
2636 | sending_ip_address = host_ntoa(-1, &interface_sock, NULL, | |
2637 | &sending_port); | |
2638 | else | |
2639 | { | |
2640 | fprintf(stderr, "exim: getsockname() failed after -MC option: %s\n", | |
2641 | strerror(errno)); | |
2642 | return EXIT_FAILURE; | |
2643 | } | |
2644 | ||
059ec3d9 PH |
2645 | if (running_in_test_harness) millisleep(500); |
2646 | break; | |
2647 | } | |
2648 | ||
2649 | /* -MCA: set the smtp_authenticated flag; this is useful only when it | |
2650 | precedes -MC (see above). The flag indicates that the host to which | |
2651 | Exim is connected has accepted an AUTH sequence. */ | |
2652 | ||
2653 | else if (Ustrcmp(argrest, "CA") == 0) | |
2654 | { | |
2655 | smtp_authenticated = TRUE; | |
2656 | break; | |
2657 | } | |
2658 | ||
2659 | /* -MCP: set the smtp_use_pipelining flag; this is useful only when | |
2660 | it preceded -MC (see above) */ | |
2661 | ||
2662 | else if (Ustrcmp(argrest, "CP") == 0) | |
2663 | { | |
2664 | smtp_use_pipelining = TRUE; | |
2665 | break; | |
2666 | } | |
2667 | ||
2668 | /* -MCQ: pass on the pid of the queue-running process that started | |
2669 | this chain of deliveries and the fd of its synchronizing pipe; this | |
2670 | is useful only when it precedes -MC (see above) */ | |
2671 | ||
2672 | else if (Ustrcmp(argrest, "CQ") == 0) | |
2673 | { | |
2674 | if(++i < argc) passed_qr_pid = (pid_t)(Uatol(argv[i])); | |
2675 | else badarg = TRUE; | |
2676 | if(++i < argc) passed_qr_pipe = (int)(Uatol(argv[i])); | |
2677 | else badarg = TRUE; | |
2678 | break; | |
2679 | } | |
2680 | ||
2681 | /* -MCS: set the smtp_use_size flag; this is useful only when it | |
2682 | precedes -MC (see above) */ | |
2683 | ||
2684 | else if (Ustrcmp(argrest, "CS") == 0) | |
2685 | { | |
2686 | smtp_use_size = TRUE; | |
2687 | break; | |
2688 | } | |
2689 | ||
2690 | /* -MCT: set the tls_offered flag; this is useful only when it | |
2691 | precedes -MC (see above). The flag indicates that the host to which | |
2692 | Exim is connected has offered TLS support. */ | |
2693 | ||
2694 | #ifdef SUPPORT_TLS | |
2695 | else if (Ustrcmp(argrest, "CT") == 0) | |
2696 | { | |
2697 | tls_offered = TRUE; | |
2698 | break; | |
2699 | } | |
2700 | #endif | |
2701 | ||
2702 | /* -M[x]: various operations on the following list of message ids: | |
2703 | -M deliver the messages, ignoring next retry times and thawing | |
2704 | -Mc deliver the messages, checking next retry times, no thawing | |
2705 | -Mf freeze the messages | |
2706 | -Mg give up on the messages | |
2707 | -Mt thaw the messages | |
2708 | -Mrm remove the messages | |
2709 | In the above cases, this must be the last option. There are also the | |
2710 | following options which are followed by a single message id, and which | |
2711 | act on that message. Some of them use the "recipient" addresses as well. | |
2712 | -Mar add recipient(s) | |
2713 | -Mmad mark all recipients delivered | |
2714 | -Mmd mark recipients(s) delivered | |
2715 | -Mes edit sender | |
0ef732d9 | 2716 | -Mset load a message for use with -be |
059ec3d9 | 2717 | -Mvb show body |
a96603a0 | 2718 | -Mvc show copy (of whole message, in RFC 2822 format) |
059ec3d9 PH |
2719 | -Mvh show header |
2720 | -Mvl show log | |
2721 | */ | |
2722 | ||
2723 | else if (*argrest == 0) | |
2724 | { | |
2725 | msg_action = MSG_DELIVER; | |
2726 | forced_delivery = deliver_force_thaw = TRUE; | |
2727 | } | |
2728 | else if (Ustrcmp(argrest, "ar") == 0) | |
2729 | { | |
2730 | msg_action = MSG_ADD_RECIPIENT; | |
2731 | one_msg_action = TRUE; | |
2732 | } | |
2733 | else if (Ustrcmp(argrest, "c") == 0) msg_action = MSG_DELIVER; | |
2734 | else if (Ustrcmp(argrest, "es") == 0) | |
2735 | { | |
2736 | msg_action = MSG_EDIT_SENDER; | |
2737 | one_msg_action = TRUE; | |
2738 | } | |
2739 | else if (Ustrcmp(argrest, "f") == 0) msg_action = MSG_FREEZE; | |
2740 | else if (Ustrcmp(argrest, "g") == 0) | |
2741 | { | |
2742 | msg_action = MSG_DELIVER; | |
2743 | deliver_give_up = TRUE; | |
2744 | } | |
2745 | else if (Ustrcmp(argrest, "mad") == 0) | |
2746 | { | |
2747 | msg_action = MSG_MARK_ALL_DELIVERED; | |
2748 | } | |
2749 | else if (Ustrcmp(argrest, "md") == 0) | |
2750 | { | |
2751 | msg_action = MSG_MARK_DELIVERED; | |
2752 | one_msg_action = TRUE; | |
2753 | } | |
2754 | else if (Ustrcmp(argrest, "rm") == 0) msg_action = MSG_REMOVE; | |
0ef732d9 PH |
2755 | else if (Ustrcmp(argrest, "set") == 0) |
2756 | { | |
2757 | msg_action = MSG_LOAD; | |
2758 | one_msg_action = TRUE; | |
2759 | } | |
059ec3d9 PH |
2760 | else if (Ustrcmp(argrest, "t") == 0) msg_action = MSG_THAW; |
2761 | else if (Ustrcmp(argrest, "vb") == 0) | |
2762 | { | |
2763 | msg_action = MSG_SHOW_BODY; | |
2764 | one_msg_action = TRUE; | |
2765 | } | |
a96603a0 PH |
2766 | else if (Ustrcmp(argrest, "vc") == 0) |
2767 | { | |
2768 | msg_action = MSG_SHOW_COPY; | |
2769 | one_msg_action = TRUE; | |
2770 | } | |
059ec3d9 PH |
2771 | else if (Ustrcmp(argrest, "vh") == 0) |
2772 | { | |
2773 | msg_action = MSG_SHOW_HEADER; | |
2774 | one_msg_action = TRUE; | |
2775 | } | |
2776 | else if (Ustrcmp(argrest, "vl") == 0) | |
2777 | { | |
2778 | msg_action = MSG_SHOW_LOG; | |
2779 | one_msg_action = TRUE; | |
2780 | } | |
2781 | else { badarg = TRUE; break; } | |
2782 | ||
2783 | /* All the -Mxx options require at least one message id. */ | |
2784 | ||
2785 | msg_action_arg = i + 1; | |
2786 | if (msg_action_arg >= argc) | |
2787 | { | |
2788 | fprintf(stderr, "exim: no message ids given after %s option\n", arg); | |
2789 | return EXIT_FAILURE; | |
2790 | } | |
2791 | ||
2792 | /* Some require only message ids to follow */ | |
2793 | ||
2794 | if (!one_msg_action) | |
2795 | { | |
2796 | int j; | |
2797 | for (j = msg_action_arg; j < argc; j++) if (!mac_ismsgid(argv[j])) | |
2798 | { | |
2799 | fprintf(stderr, "exim: malformed message id %s after %s option\n", | |
2800 | argv[j], arg); | |
2801 | return EXIT_FAILURE; | |
2802 | } | |
2803 | goto END_ARG; /* Remaining args are ids */ | |
2804 | } | |
2805 | ||
2806 | /* Others require only one message id, possibly followed by addresses, | |
2807 | which will be handled as normal arguments. */ | |
2808 | ||
2809 | else | |
2810 | { | |
2811 | if (!mac_ismsgid(argv[msg_action_arg])) | |
2812 | { | |
2813 | fprintf(stderr, "exim: malformed message id %s after %s option\n", | |
2814 | argv[msg_action_arg], arg); | |
2815 | return EXIT_FAILURE; | |
2816 | } | |
2817 | i++; | |
2818 | } | |
2819 | break; | |
2820 | ||
2821 | ||
2822 | /* Some programs seem to call the -om option without the leading o; | |
2823 | for sendmail it askes for "me too". Exim always does this. */ | |
2824 | ||
2825 | case 'm': | |
2826 | if (*argrest != 0) badarg = TRUE; | |
2827 | break; | |
2828 | ||
2829 | ||
2830 | /* -N: don't do delivery - a debugging option that stops transports doing | |
2831 | their thing. It implies debugging at the D_v level. */ | |
2832 | ||
2833 | case 'N': | |
2834 | if (*argrest == 0) | |
2835 | { | |
2836 | dont_deliver = TRUE; | |
2837 | debug_selector |= D_v; | |
2838 | debug_file = stderr; | |
2839 | } | |
2840 | else badarg = TRUE; | |
2841 | break; | |
2842 | ||
2843 | ||
12f69989 PP |
2844 | /* -n: This means "don't alias" in sendmail, apparently. |
2845 | For normal invocations, it has no effect. | |
2846 | It may affect some other options. */ | |
059ec3d9 PH |
2847 | |
2848 | case 'n': | |
12f69989 | 2849 | flag_n = TRUE; |
059ec3d9 PH |
2850 | break; |
2851 | ||
2852 | /* -O: Just ignore it. In sendmail, apparently -O option=value means set | |
2853 | option to the specified value. This form uses long names. We need to handle | |
2854 | -O option=value and -Ooption=value. */ | |
2855 | ||
2856 | case 'O': | |
2857 | if (*argrest == 0) | |
2858 | { | |
2859 | if (++i >= argc) | |
2860 | { | |
2861 | fprintf(stderr, "exim: string expected after -O\n"); | |
2862 | exit(EXIT_FAILURE); | |
2863 | } | |
2864 | } | |
2865 | break; | |
2866 | ||
2867 | case 'o': | |
2868 | ||
2869 | /* -oA: Set an argument for the bi command (sendmail's "alternate alias | |
2870 | file" option). */ | |
2871 | ||
2872 | if (*argrest == 'A') | |
2873 | { | |
2874 | alias_arg = argrest + 1; | |
2875 | if (alias_arg[0] == 0) | |
2876 | { | |
2877 | if (i+1 < argc) alias_arg = argv[++i]; else | |
2878 | { | |
2879 | fprintf(stderr, "exim: string expected after -oA\n"); | |
2880 | exit(EXIT_FAILURE); | |
2881 | } | |
2882 | } | |
2883 | } | |
2884 | ||
2885 | /* -oB: Set a connection message max value for remote deliveries */ | |
2886 | ||
2887 | else if (*argrest == 'B') | |
2888 | { | |
2889 | uschar *p = argrest + 1; | |
2890 | if (p[0] == 0) | |
2891 | { | |
2892 | if (i+1 < argc && isdigit((argv[i+1][0]))) p = argv[++i]; else | |
2893 | { | |
2894 | connection_max_messages = 1; | |
2895 | p = NULL; | |
2896 | } | |
2897 | } | |
2898 | ||
2899 | if (p != NULL) | |
2900 | { | |
2901 | if (!isdigit(*p)) | |
2902 | { | |
2903 | fprintf(stderr, "exim: number expected after -oB\n"); | |
2904 | exit(EXIT_FAILURE); | |
2905 | } | |
2906 | connection_max_messages = Uatoi(p); | |
2907 | } | |
2908 | } | |
2909 | ||
2910 | /* -odb: background delivery */ | |
2911 | ||
2912 | else if (Ustrcmp(argrest, "db") == 0) | |
2913 | { | |
2914 | synchronous_delivery = FALSE; | |
2915 | arg_queue_only = FALSE; | |
2916 | queue_only_set = TRUE; | |
2917 | } | |
2918 | ||
2919 | /* -odf: foreground delivery (smail-compatible option); same effect as | |
2920 | -odi: interactive (synchronous) delivery (sendmail-compatible option) | |
2921 | */ | |
2922 | ||
2923 | else if (Ustrcmp(argrest, "df") == 0 || Ustrcmp(argrest, "di") == 0) | |
2924 | { | |
2925 | synchronous_delivery = TRUE; | |
2926 | arg_queue_only = FALSE; | |
2927 | queue_only_set = TRUE; | |
2928 | } | |
2929 | ||
2930 | /* -odq: queue only */ | |
2931 | ||
2932 | else if (Ustrcmp(argrest, "dq") == 0) | |
2933 | { | |
2934 | synchronous_delivery = FALSE; | |
2935 | arg_queue_only = TRUE; | |
2936 | queue_only_set = TRUE; | |
2937 | } | |
2938 | ||
2939 | /* -odqs: queue SMTP only - do local deliveries and remote routing, | |
2940 | but no remote delivery */ | |
2941 | ||
2942 | else if (Ustrcmp(argrest, "dqs") == 0) | |
2943 | { | |
2944 | queue_smtp = TRUE; | |
2945 | arg_queue_only = FALSE; | |
2946 | queue_only_set = TRUE; | |
2947 | } | |
2948 | ||
2949 | /* -oex: Sendmail error flags. As these are also accepted without the | |
2950 | leading -o prefix, for compatibility with vacation and other callers, | |
2951 | they are handled with -e above. */ | |
2952 | ||
2953 | /* -oi: Set flag so dot doesn't end non-SMTP input (same as -i) | |
2954 | -oitrue: Another sendmail syntax for the same */ | |
2955 | ||
2956 | else if (Ustrcmp(argrest, "i") == 0 || | |
2957 | Ustrcmp(argrest, "itrue") == 0) | |
2958 | dot_ends = FALSE; | |
2959 | ||
2960 | /* -oM*: Set various characteristics for an incoming message; actually | |
2961 | acted on for trusted callers only. */ | |
2962 | ||
2963 | else if (*argrest == 'M') | |
2964 | { | |
2965 | if (i+1 >= argc) | |
2966 | { | |
2967 | fprintf(stderr, "exim: data expected after -o%s\n", argrest); | |
2968 | exit(EXIT_FAILURE); | |
2969 | } | |
2970 | ||
2971 | /* -oMa: Set sender host address */ | |
2972 | ||
2973 | if (Ustrcmp(argrest, "Ma") == 0) sender_host_address = argv[++i]; | |
2974 | ||
2975 | /* -oMaa: Set authenticator name */ | |
2976 | ||
2977 | else if (Ustrcmp(argrest, "Maa") == 0) | |
2978 | sender_host_authenticated = argv[++i]; | |
2979 | ||
2980 | /* -oMas: setting authenticated sender */ | |
2981 | ||
2982 | else if (Ustrcmp(argrest, "Mas") == 0) authenticated_sender = argv[++i]; | |
2983 | ||
2984 | /* -oMai: setting authenticated id */ | |
2985 | ||
2986 | else if (Ustrcmp(argrest, "Mai") == 0) authenticated_id = argv[++i]; | |
2987 | ||
2988 | /* -oMi: Set incoming interface address */ | |
2989 | ||
2990 | else if (Ustrcmp(argrest, "Mi") == 0) interface_address = argv[++i]; | |
2991 | ||
2992 | /* -oMr: Received protocol */ | |
2993 | ||
2994 | else if (Ustrcmp(argrest, "Mr") == 0) received_protocol = argv[++i]; | |
2995 | ||
2996 | /* -oMs: Set sender host name */ | |
2997 | ||
2998 | else if (Ustrcmp(argrest, "Ms") == 0) sender_host_name = argv[++i]; | |
2999 | ||
3000 | /* -oMt: Set sender ident */ | |
3001 | ||
33d73e3b PH |
3002 | else if (Ustrcmp(argrest, "Mt") == 0) |
3003 | { | |
3004 | sender_ident_set = TRUE; | |
3005 | sender_ident = argv[++i]; | |
3006 | } | |
059ec3d9 PH |
3007 | |
3008 | /* Else a bad argument */ | |
3009 | ||
3010 | else | |
3011 | { | |
3012 | badarg = TRUE; | |
3013 | break; | |
3014 | } | |
3015 | } | |
3016 | ||
3017 | /* -om: Me-too flag for aliases. Exim always does this. Some programs | |
3018 | seem to call this as -m (undocumented), so that is also accepted (see | |
3019 | above). */ | |
3020 | ||
3021 | else if (Ustrcmp(argrest, "m") == 0) {} | |
3022 | ||
3023 | /* -oo: An ancient flag for old-style addresses which still seems to | |
3024 | crop up in some calls (see in SCO). */ | |
3025 | ||
3026 | else if (Ustrcmp(argrest, "o") == 0) {} | |
3027 | ||
3028 | /* -oP <name>: set pid file path for daemon */ | |
3029 | ||
3030 | else if (Ustrcmp(argrest, "P") == 0) | |
3031 | override_pid_file_path = argv[++i]; | |
3032 | ||
3033 | /* -or <n>: set timeout for non-SMTP acceptance | |
3034 | -os <n>: set timeout for SMTP acceptance */ | |
3035 | ||
3036 | else if (*argrest == 'r' || *argrest == 's') | |
3037 | { | |
3038 | int *tp = (*argrest == 'r')? | |
3039 | &arg_receive_timeout : &arg_smtp_receive_timeout; | |
3040 | if (argrest[1] == 0) | |
3041 | { | |
3042 | if (i+1 < argc) *tp= readconf_readtime(argv[++i], 0, FALSE); | |
3043 | } | |
3044 | else *tp = readconf_readtime(argrest + 1, 0, FALSE); | |
3045 | if (*tp < 0) | |
3046 | { | |
3047 | fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]); | |
3048 | exit(EXIT_FAILURE); | |
3049 | } | |
3050 | } | |
3051 | ||
3052 | /* -oX <list>: Override local_interfaces and/or default daemon ports */ | |
3053 | ||
3054 | else if (Ustrcmp(argrest, "X") == 0) | |
3055 | override_local_interfaces = argv[++i]; | |
3056 | ||
3057 | /* Unknown -o argument */ | |
3058 | ||
3059 | else badarg = TRUE; | |
3060 | break; | |
3061 | ||
3062 | ||
3063 | /* -ps: force Perl startup; -pd force delayed Perl startup */ | |
3064 | ||
3065 | case 'p': | |
3066 | #ifdef EXIM_PERL | |
3067 | if (*argrest == 's' && argrest[1] == 0) | |
3068 | { | |
3069 | perl_start_option = 1; | |
3070 | break; | |
3071 | } | |
3072 | if (*argrest == 'd' && argrest[1] == 0) | |
3073 | { | |
3074 | perl_start_option = -1; | |
3075 | break; | |
3076 | } | |
3077 | #endif | |
3078 | ||
3079 | /* -panythingelse is taken as the Sendmail-compatible argument -prval:sval, | |
3080 | which sets the host protocol and host name */ | |
3081 | ||
3082 | if (*argrest == 0) | |
3083 | { | |
3084 | if (i+1 < argc) argrest = argv[++i]; else | |
3085 | { badarg = TRUE; break; } | |
3086 | } | |
3087 | ||
3088 | if (*argrest != 0) | |
3089 | { | |
3090 | uschar *hn = Ustrchr(argrest, ':'); | |
3091 | if (hn == NULL) | |
3092 | { | |
3093 | received_protocol = argrest; | |
3094 | } | |
3095 | else | |
3096 | { | |
3097 | received_protocol = string_copyn(argrest, hn - argrest); | |
3098 | sender_host_name = hn + 1; | |
3099 | } | |
3100 | } | |
3101 | break; | |
3102 | ||
3103 | ||
3104 | case 'q': | |
3105 | receiving_message = FALSE; | |
3cc66b45 PH |
3106 | if (queue_interval >= 0) |
3107 | { | |
3108 | fprintf(stderr, "exim: -q specified more than once\n"); | |
3109 | exit(EXIT_FAILURE); | |
3110 | } | |
059ec3d9 PH |
3111 | |
3112 | /* -qq...: Do queue runs in a 2-stage manner */ | |
3113 | ||
3114 | if (*argrest == 'q') | |
3115 | { | |
3116 | queue_2stage = TRUE; | |
3117 | argrest++; | |
3118 | } | |
3119 | ||
3120 | /* -qi...: Do only first (initial) deliveries */ | |
3121 | ||
3122 | if (*argrest == 'i') | |
3123 | { | |
3124 | queue_run_first_delivery = TRUE; | |
3125 | argrest++; | |
3126 | } | |
3127 | ||
3128 | /* -qf...: Run the queue, forcing deliveries | |
3129 | -qff..: Ditto, forcing thawing as well */ | |
3130 | ||
3131 | if (*argrest == 'f') | |
3132 | { | |
3133 | queue_run_force = TRUE; | |
3134 | if (*(++argrest) == 'f') | |
3135 | { | |
3136 | deliver_force_thaw = TRUE; | |
3137 | argrest++; | |
3138 | } | |
3139 | } | |
3140 | ||
3141 | /* -q[f][f]l...: Run the queue only on local deliveries */ | |
3142 | ||
3143 | if (*argrest == 'l') | |
3144 | { | |
3145 | queue_run_local = TRUE; | |
3146 | argrest++; | |
3147 | } | |
3148 | ||
3149 | /* -q[f][f][l]: Run the queue, optionally forced, optionally local only, | |
3150 | optionally starting from a given message id. */ | |
3151 | ||
3152 | if (*argrest == 0 && | |
3153 | (i + 1 >= argc || argv[i+1][0] == '-' || mac_ismsgid(argv[i+1]))) | |
3154 | { | |
3155 | queue_interval = 0; | |
3156 | if (i+1 < argc && mac_ismsgid(argv[i+1])) | |
3157 | start_queue_run_id = argv[++i]; | |
3158 | if (i+1 < argc && mac_ismsgid(argv[i+1])) | |
3159 | stop_queue_run_id = argv[++i]; | |
3160 | } | |
3161 | ||
3162 | /* -q[f][f][l]<n>: Run the queue at regular intervals, optionally forced, | |
3163 | optionally local only. */ | |
3164 | ||
3165 | else | |
3166 | { | |
3167 | if (*argrest != 0) | |
3168 | queue_interval = readconf_readtime(argrest, 0, FALSE); | |
3169 | else | |
3170 | queue_interval = readconf_readtime(argv[++i], 0, FALSE); | |
3171 | if (queue_interval <= 0) | |
3172 | { | |
3173 | fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]); | |
3174 | exit(EXIT_FAILURE); | |
3175 | } | |
3176 | } | |
3177 | break; | |
3178 | ||
3179 | ||
3180 | case 'R': /* Synonymous with -qR... */ | |
3181 | receiving_message = FALSE; | |
3182 | ||
3183 | /* -Rf: As -R (below) but force all deliveries, | |
3184 | -Rff: Ditto, but also thaw all frozen messages, | |
3185 | -Rr: String is regex | |
3186 | -Rrf: Regex and force | |
3187 | -Rrff: Regex and force and thaw | |
3188 | ||
3189 | in all cases provided there are no further characters in this | |
3190 | argument. */ | |
3191 | ||
3192 | if (*argrest != 0) | |
3193 | { | |
3194 | int i; | |
3195 | for (i = 0; i < sizeof(rsopts)/sizeof(uschar *); i++) | |
3196 | { | |
3197 | if (Ustrcmp(argrest, rsopts[i]) == 0) | |
3198 | { | |
3199 | if (i != 2) queue_run_force = TRUE; | |
3200 | if (i >= 2) deliver_selectstring_regex = TRUE; | |
3201 | if (i == 1 || i == 4) deliver_force_thaw = TRUE; | |
3202 | argrest += Ustrlen(rsopts[i]); | |
3203 | } | |
3204 | } | |
3205 | } | |
3206 | ||
3207 | /* -R: Set string to match in addresses for forced queue run to | |
3208 | pick out particular messages. */ | |
3209 | ||
3210 | if (*argrest == 0) | |
3211 | { | |
3212 | if (i+1 < argc) deliver_selectstring = argv[++i]; else | |
3213 | { | |
3214 | fprintf(stderr, "exim: string expected after -R\n"); | |
3215 | exit(EXIT_FAILURE); | |
3216 | } | |
3217 | } | |
3218 | else deliver_selectstring = argrest; | |
059ec3d9 PH |
3219 | break; |
3220 | ||
3221 | ||
3222 | /* -r: an obsolete synonym for -f (see above) */ | |
3223 | ||
3224 | ||
3225 | /* -S: Like -R but works on sender. */ | |
3226 | ||
3227 | case 'S': /* Synonymous with -qS... */ | |
3228 | receiving_message = FALSE; | |
3229 | ||
3230 | /* -Sf: As -S (below) but force all deliveries, | |
3231 | -Sff: Ditto, but also thaw all frozen messages, | |
3232 | -Sr: String is regex | |
3233 | -Srf: Regex and force | |
3234 | -Srff: Regex and force and thaw | |
3235 | ||
3236 | in all cases provided there are no further characters in this | |
3237 | argument. */ | |
3238 | ||
3239 | if (*argrest != 0) | |
3240 | { | |
3241 | int i; | |
3242 | for (i = 0; i < sizeof(rsopts)/sizeof(uschar *); i++) | |
3243 | { | |
3244 | if (Ustrcmp(argrest, rsopts[i]) == 0) | |
3245 | { | |
3246 | if (i != 2) queue_run_force = TRUE; | |
3247 | if (i >= 2) deliver_selectstring_sender_regex = TRUE; | |
3248 | if (i == 1 || i == 4) deliver_force_thaw = TRUE; | |
3249 | argrest += Ustrlen(rsopts[i]); | |
3250 | } | |
3251 | } | |
3252 | } | |
3253 | ||
3254 | /* -S: Set string to match in addresses for forced queue run to | |
3255 | pick out particular messages. */ | |
3256 | ||
3257 | if (*argrest == 0) | |
3258 | { | |
3259 | if (i+1 < argc) deliver_selectstring_sender = argv[++i]; else | |
3260 | { | |
3261 | fprintf(stderr, "exim: string expected after -S\n"); | |
3262 | exit(EXIT_FAILURE); | |
3263 | } | |
3264 | } | |
3265 | else deliver_selectstring_sender = argrest; | |
059ec3d9 PH |
3266 | break; |
3267 | ||
3268 | /* -Tqt is an option that is exclusively for use by the testing suite. | |
3269 | It is not recognized in other circumstances. It allows for the setting up | |
3270 | of explicit "queue times" so that various warning/retry things can be | |
3271 | tested. Otherwise variability of clock ticks etc. cause problems. */ | |
3272 | ||
3273 | case 'T': | |
3274 | if (running_in_test_harness && Ustrcmp(argrest, "qt") == 0) | |
3275 | fudged_queue_times = argv[++i]; | |
3276 | else badarg = TRUE; | |
3277 | break; | |
3278 | ||
3279 | ||
3280 | /* -t: Set flag to extract recipients from body of message. */ | |
3281 | ||
3282 | case 't': | |
3283 | if (*argrest == 0) extract_recipients = TRUE; | |
3284 | ||
3285 | /* -ti: Set flag to extract recipients from body of message, and also | |
3286 | specify that dot does not end the message. */ | |
3287 | ||
3288 | else if (Ustrcmp(argrest, "i") == 0) | |
3289 | { | |
3290 | extract_recipients = TRUE; | |
3291 | dot_ends = FALSE; | |
3292 | } | |
3293 | ||
3294 | /* -tls-on-connect: don't wait for STARTTLS (for old clients) */ | |
3295 | ||
3296 | #ifdef SUPPORT_TLS | |
817d9f57 | 3297 | else if (Ustrcmp(argrest, "ls-on-connect") == 0) tls_in.on_connect = TRUE; |
059ec3d9 PH |
3298 | #endif |
3299 | ||
3300 | else badarg = TRUE; | |
3301 | break; | |
3302 | ||
3303 | ||
3304 | /* -U: This means "initial user submission" in sendmail, apparently. The | |
3305 | doc claims that in future sendmail may refuse syntactically invalid | |
3306 | messages instead of fixing them. For the moment, we just ignore it. */ | |
3307 | ||
3308 | case 'U': | |
3309 | break; | |
3310 | ||
3311 | ||
3312 | /* -v: verify things - this is a very low-level debugging */ | |
3313 | ||
3314 | case 'v': | |
3315 | if (*argrest == 0) | |
3316 | { | |
3317 | debug_selector |= D_v; | |
3318 | debug_file = stderr; | |
3319 | } | |
3320 | else badarg = TRUE; | |
3321 | break; | |
3322 | ||
3323 | ||
3324 | /* -x: AIX uses this to indicate some fancy 8-bit character stuff: | |
3325 | ||
3326 | The -x flag tells the sendmail command that mail from a local | |
3327 | mail program has National Language Support (NLS) extended characters | |
3328 | in the body of the mail item. The sendmail command can send mail with | |
3329 | extended NLS characters across networks that normally corrupts these | |
3330 | 8-bit characters. | |
3331 | ||
3332 | As Exim is 8-bit clean, it just ignores this flag. */ | |
3333 | ||
3334 | case 'x': | |
3335 | if (*argrest != 0) badarg = TRUE; | |
3336 | break; | |
3337 | ||
a3fb9793 PP |
3338 | /* -X: in sendmail: takes one parameter, logfile, and sends debugging |
3339 | logs to that file. We swallow the parameter and otherwise ignore it. */ | |
3340 | ||
3341 | case 'X': | |
3342 | if (*argrest == '\0') | |
3343 | { | |
3344 | if (++i >= argc) | |
3345 | { | |
3346 | fprintf(stderr, "exim: string expected after -X\n"); | |
3347 | exit(EXIT_FAILURE); | |
3348 | } | |
3349 | } | |
3350 | break; | |
3351 | ||
059ec3d9 PH |
3352 | /* All other initial characters are errors */ |
3353 | ||
3354 | default: | |
3355 | badarg = TRUE; | |
3356 | break; | |
3357 | } /* End of high-level switch statement */ | |
3358 | ||
3359 | /* Failed to recognize the option, or syntax error */ | |
3360 | ||
3361 | if (badarg) | |
3362 | { | |
3363 | fprintf(stderr, "exim abandoned: unknown, malformed, or incomplete " | |
3364 | "option %s\n", arg); | |
3365 | exit(EXIT_FAILURE); | |
3366 | } | |
3367 | } | |
3368 | ||
3369 | ||
3cc66b45 PH |
3370 | /* If -R or -S have been specified without -q, assume a single queue run. */ |
3371 | ||
3372 | if ((deliver_selectstring != NULL || deliver_selectstring_sender != NULL) && | |
3373 | queue_interval < 0) queue_interval = 0; | |
3374 | ||
3375 | ||
059ec3d9 | 3376 | END_ARG: |
81ea09ca NM |
3377 | /* If usage_wanted is set we call the usage function - which never returns */ |
3378 | if (usage_wanted) exim_usage(called_as); | |
3379 | ||
3380 | /* Arguments have been processed. Check for incompatibilities. */ | |
059ec3d9 PH |
3381 | if (( |
3382 | (smtp_input || extract_recipients || recipients_arg < argc) && | |
3383 | (daemon_listen || queue_interval >= 0 || bi_option || | |
3384 | test_retry_arg >= 0 || test_rewrite_arg >= 0 || | |
f05da2e8 | 3385 | filter_test != FTEST_NONE || (msg_action_arg > 0 && !one_msg_action)) |
059ec3d9 PH |
3386 | ) || |
3387 | ( | |
3388 | msg_action_arg > 0 && | |
0ef732d9 PH |
3389 | (daemon_listen || queue_interval >= 0 || list_options || |
3390 | (checking && msg_action != MSG_LOAD) || | |
3391 | bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0) | |
059ec3d9 PH |
3392 | ) || |
3393 | ( | |
3394 | (daemon_listen || queue_interval >= 0) && | |
3395 | (sender_address != NULL || list_options || list_queue || checking || | |
0ef732d9 | 3396 | bi_option) |
059ec3d9 PH |
3397 | ) || |
3398 | ( | |
3399 | daemon_listen && queue_interval == 0 | |
3400 | ) || | |
3401 | ( | |
9ee44efb PP |
3402 | inetd_wait_mode && queue_interval >= 0 |
3403 | ) || | |
3404 | ( | |
059ec3d9 PH |
3405 | list_options && |
3406 | (checking || smtp_input || extract_recipients || | |
f05da2e8 | 3407 | filter_test != FTEST_NONE || bi_option) |
059ec3d9 PH |
3408 | ) || |
3409 | ( | |
3410 | verify_address_mode && | |
3411 | (address_test_mode || smtp_input || extract_recipients || | |
f05da2e8 | 3412 | filter_test != FTEST_NONE || bi_option) |
059ec3d9 PH |
3413 | ) || |
3414 | ( | |
3415 | address_test_mode && (smtp_input || extract_recipients || | |
f05da2e8 | 3416 | filter_test != FTEST_NONE || bi_option) |
059ec3d9 PH |
3417 | ) || |
3418 | ( | |
f05da2e8 | 3419 | smtp_input && (sender_address != NULL || filter_test != FTEST_NONE || |
059ec3d9 PH |
3420 | extract_recipients) |
3421 | ) || | |
3422 | ( | |
3423 | deliver_selectstring != NULL && queue_interval < 0 | |
328895cc PH |
3424 | ) || |
3425 | ( | |
3426 | msg_action == MSG_LOAD && | |
3427 | (!expansion_test || expansion_test_message != NULL) | |
059ec3d9 PH |
3428 | ) |
3429 | ) | |
3430 | { | |
3431 | fprintf(stderr, "exim: incompatible command-line options or arguments\n"); | |
3432 | exit(EXIT_FAILURE); | |
3433 | } | |
3434 | ||
3435 | /* If debugging is set up, set the file and the file descriptor to pass on to | |
3436 | child processes. It should, of course, be 2 for stderr. Also, force the daemon | |
3437 | to run in the foreground. */ | |
3438 | ||
3439 | if (debug_selector != 0) | |
3440 | { | |
3441 | debug_file = stderr; | |
3442 | debug_fd = fileno(debug_file); | |
3443 | background_daemon = FALSE; | |
3444 | if (running_in_test_harness) millisleep(100); /* lets caller finish */ | |
3445 | if (debug_selector != D_v) /* -v only doesn't show this */ | |
3446 | { | |
3447 | debug_printf("Exim version %s uid=%ld gid=%ld pid=%d D=%x\n", | |
3448 | version_string, (long int)real_uid, (long int)real_gid, (int)getpid(), | |
3449 | debug_selector); | |
6545de78 PP |
3450 | if (!version_printed) |
3451 | show_whats_supported(stderr); | |
059ec3d9 PH |
3452 | } |
3453 | } | |
3454 | ||
3455 | /* When started with root privilege, ensure that the limits on the number of | |
3456 | open files and the number of processes (where that is accessible) are | |
3457 | sufficiently large, or are unset, in case Exim has been called from an | |
3458 | environment where the limits are screwed down. Not all OS have the ability to | |
3459 | change some of these limits. */ | |
3460 | ||
3461 | if (unprivileged) | |
3462 | { | |
3463 | DEBUG(D_any) debug_print_ids(US"Exim has no root privilege:"); | |
3464 | } | |
3465 | else | |
3466 | { | |
3467 | struct rlimit rlp; | |
3468 | ||
3469 | #ifdef RLIMIT_NOFILE | |
3470 | if (getrlimit(RLIMIT_NOFILE, &rlp) < 0) | |
3471 | { | |
3472 | log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NOFILE) failed: %s", | |
3473 | strerror(errno)); | |
3474 | rlp.rlim_cur = rlp.rlim_max = 0; | |
3475 | } | |
eb2c0248 PH |
3476 | |
3477 | /* I originally chose 1000 as a nice big number that was unlikely to | |
a494b1e1 PH |
3478 | be exceeded. It turns out that some older OS have a fixed upper limit of |
3479 | 256. */ | |
eb2c0248 | 3480 | |
059ec3d9 PH |
3481 | if (rlp.rlim_cur < 1000) |
3482 | { | |
3483 | rlp.rlim_cur = rlp.rlim_max = 1000; | |
3484 | if (setrlimit(RLIMIT_NOFILE, &rlp) < 0) | |
eb2c0248 | 3485 | { |
a494b1e1 PH |
3486 | rlp.rlim_cur = rlp.rlim_max = 256; |
3487 | if (setrlimit(RLIMIT_NOFILE, &rlp) < 0) | |
3488 | log_write(0, LOG_MAIN|LOG_PANIC, "setrlimit(RLIMIT_NOFILE) failed: %s", | |
3489 | strerror(errno)); | |
eb2c0248 | 3490 | } |
059ec3d9 PH |
3491 | } |
3492 | #endif | |
3493 | ||
3494 | #ifdef RLIMIT_NPROC | |
3495 | if (getrlimit(RLIMIT_NPROC, &rlp) < 0) | |
3496 | { | |
3497 | log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NPROC) failed: %s", | |
3498 | strerror(errno)); | |
3499 | rlp.rlim_cur = rlp.rlim_max = 0; | |
3500 | } | |
3501 | ||
3502 | #ifdef RLIM_INFINITY | |
3503 | if (rlp.rlim_cur != RLIM_INFINITY && rlp.rlim_cur < 1000) | |
3504 | { | |
3505 | rlp.rlim_cur = rlp.rlim_max = RLIM_INFINITY; | |
3506 | #else | |
3507 | if (rlp.rlim_cur < 1000) | |
3508 | { | |
3509 | rlp.rlim_cur = rlp.rlim_max = 1000; | |
3510 | #endif | |
3511 | if (setrlimit(RLIMIT_NPROC, &rlp) < 0) | |
3512 | log_write(0, LOG_MAIN|LOG_PANIC, "setrlimit(RLIMIT_NPROC) failed: %s", | |
3513 | strerror(errno)); | |
3514 | } | |
3515 | #endif | |
3516 | } | |
3517 | ||
3518 | /* Exim is normally entered as root (but some special configurations are | |
3519 | possible that don't do this). However, it always spins off sub-processes that | |
3520 | set their uid and gid as required for local delivery. We don't want to pass on | |
3521 | any extra groups that root may belong to, so we want to get rid of them all at | |
3522 | this point. | |
3523 | ||
3524 | We need to obey setgroups() at this stage, before possibly giving up root | |
3525 | privilege for a changed configuration file, but later on we might need to | |
3526 | check on the additional groups for the admin user privilege - can't do that | |
3527 | till after reading the config, which might specify the exim gid. Therefore, | |
3528 | save the group list here first. */ | |
3529 | ||
3530 | group_count = getgroups(NGROUPS_MAX, group_list); | |
cd59ab18 PP |
3531 | if (group_count < 0) |
3532 | { | |
3533 | fprintf(stderr, "exim: getgroups() failed: %s\n", strerror(errno)); | |
3534 | exit(EXIT_FAILURE); | |
3535 | } | |
059ec3d9 PH |
3536 | |
3537 | /* There is a fundamental difference in some BSD systems in the matter of | |
3538 | groups. FreeBSD and BSDI are known to be different; NetBSD and OpenBSD are | |
3539 | known not to be different. On the "different" systems there is a single group | |
3540 | list, and the first entry in it is the current group. On all other versions of | |
3541 | Unix there is a supplementary group list, which is in *addition* to the current | |
3542 | group. Consequently, to get rid of all extraneous groups on a "standard" system | |
3543 | you pass over 0 groups to setgroups(), while on a "different" system you pass | |
3544 | over a single group - the current group, which is always the first group in the | |
3545 | list. Calling setgroups() with zero groups on a "different" system results in | |
3546 | an error return. The following code should cope with both types of system. | |
3547 | ||
3548 | However, if this process isn't running as root, setgroups() can't be used | |
3549 | since you have to be root to run it, even if throwing away groups. Not being | |
3550 | root here happens only in some unusual configurations. We just ignore the | |
3551 | error. */ | |
3552 | ||
3553 | if (setgroups(0, NULL) != 0) | |
3554 | { | |
3555 | if (setgroups(1, group_list) != 0 && !unprivileged) | |
3556 | { | |
3557 | fprintf(stderr, "exim: setgroups() failed: %s\n", strerror(errno)); | |
3558 | exit(EXIT_FAILURE); | |
3559 | } | |
3560 | } | |
3561 | ||
3562 | /* If the configuration file name has been altered by an argument on the | |
3563 | command line (either a new file name or a macro definition) and the caller is | |
cd25e41d DW |
3564 | not root, or if this is a filter testing run, remove any setuid privilege the |
3565 | program has and run as the underlying user. | |
059ec3d9 | 3566 | |
cd25e41d DW |
3567 | The exim user is locked out of this, which severely restricts the use of -C |
3568 | for some purposes. | |
059ec3d9 PH |
3569 | |
3570 | Otherwise, set the real ids to the effective values (should be root unless run | |
3571 | from inetd, which it can either be root or the exim uid, if one is configured). | |
3572 | ||
3573 | There is a private mechanism for bypassing some of this, in order to make it | |
3574 | possible to test lots of configurations automatically, without having either to | |
3575 | recompile each time, or to patch in an actual configuration file name and other | |
3576 | values (such as the path name). If running in the test harness, pretend that | |
3577 | configuration file changes and macro definitions haven't happened. */ | |
3578 | ||
3579 | if (( /* EITHER */ | |
a7cbbf50 PP |
3580 | (!trusted_config || /* Config changed, or */ |
3581 | !macros_trusted()) && /* impermissible macros and */ | |
059ec3d9 | 3582 | real_uid != root_uid && /* Not root, and */ |
059ec3d9 PH |
3583 | !running_in_test_harness /* Not fudged */ |
3584 | ) || /* OR */ | |
3585 | expansion_test /* expansion testing */ | |
3586 | || /* OR */ | |
f05da2e8 | 3587 | filter_test != FTEST_NONE) /* Filter testing */ |
059ec3d9 PH |
3588 | { |
3589 | setgroups(group_count, group_list); | |
3590 | exim_setugid(real_uid, real_gid, FALSE, | |
3591 | US"-C, -D, -be or -bf forces real uid"); | |
3592 | removed_privilege = TRUE; | |
3593 | ||
3594 | /* In the normal case when Exim is called like this, stderr is available | |
3595 | and should be used for any logging information because attempts to write | |
3596 | to the log will usually fail. To arrange this, we unset really_exim. However, | |
3597 | if no stderr is available there is no point - we might as well have a go | |
b7487bce | 3598 | at the log (if it fails, syslog will be written). |
059ec3d9 | 3599 | |
b7487bce PP |
3600 | Note that if the invoker is Exim, the logs remain available. Messing with |
3601 | this causes unlogged successful deliveries. */ | |
3602 | ||
3603 | if ((log_stderr != NULL) && (real_uid != exim_uid)) | |
3604 | really_exim = FALSE; | |
059ec3d9 PH |
3605 | } |
3606 | ||
3607 | /* Privilege is to be retained for the moment. It may be dropped later, | |
3608 | depending on the job that this Exim process has been asked to do. For now, set | |
3609 | the real uid to the effective so that subsequent re-execs of Exim are done by a | |
3610 | privileged user. */ | |
3611 | ||
3612 | else exim_setugid(geteuid(), getegid(), FALSE, US"forcing real = effective"); | |
3613 | ||
f05da2e8 | 3614 | /* If testing a filter, open the file(s) now, before wasting time doing other |
059ec3d9 PH |
3615 | setups and reading the message. */ |
3616 | ||
f05da2e8 PH |
3617 | if ((filter_test & FTEST_SYSTEM) != 0) |
3618 | { | |
3619 | filter_sfd = Uopen(filter_test_sfile, O_RDONLY, 0); | |
3620 | if (filter_sfd < 0) | |
3621 | { | |
3622 | fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_sfile, | |
3623 | strerror(errno)); | |
3624 | return EXIT_FAILURE; | |
3625 | } | |
3626 | } | |
3627 | ||
3628 | if ((filter_test & FTEST_USER) != 0) | |
059ec3d9 | 3629 | { |
f05da2e8 PH |
3630 | filter_ufd = Uopen(filter_test_ufile, O_RDONLY, 0); |
3631 | if (filter_ufd < 0) | |
059ec3d9 | 3632 | { |
f05da2e8 | 3633 | fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_ufile, |
059ec3d9 PH |
3634 | strerror(errno)); |
3635 | return EXIT_FAILURE; | |
3636 | } | |
3637 | } | |
3638 | ||
8829633f PP |
3639 | /* Initialise lookup_list |
3640 | If debugging, already called above via version reporting. | |
3641 | In either case, we initialise the list of available lookups while running | |
3642 | as root. All dynamically modules are loaded from a directory which is | |
3643 | hard-coded into the binary and is code which, if not a module, would be | |
3644 | part of Exim already. Ability to modify the content of the directory | |
3645 | is equivalent to the ability to modify a setuid binary! | |
3646 | ||
3647 | This needs to happen before we read the main configuration. */ | |
3648 | init_lookup_list(); | |
3649 | ||
059ec3d9 PH |
3650 | /* Read the main runtime configuration data; this gives up if there |
3651 | is a failure. It leaves the configuration file open so that the subsequent | |
3652 | configuration data for delivery can be read if needed. */ | |
3653 | ||
3654 | readconf_main(); | |
3655 | ||
a3fb9793 PP |
3656 | /* If an action on specific messages is requested, or if a daemon or queue |
3657 | runner is being started, we need to know if Exim was called by an admin user. | |
3658 | This is the case if the real user is root or exim, or if the real group is | |
3659 | exim, or if one of the supplementary groups is exim or a group listed in | |
3660 | admin_groups. We don't fail all message actions immediately if not admin_user, | |
3661 | since some actions can be performed by non-admin users. Instead, set admin_user | |
3662 | for later interrogation. */ | |
3663 | ||
3664 | if (real_uid == root_uid || real_uid == exim_uid || real_gid == exim_gid) | |
3665 | admin_user = TRUE; | |
3666 | else | |
3667 | { | |
3668 | int i, j; | |
3669 | for (i = 0; i < group_count; i++) | |
3670 | { | |
3671 | if (group_list[i] == exim_gid) admin_user = TRUE; | |
3672 | else if (admin_groups != NULL) | |
3673 | { | |
3674 | for (j = 1; j <= (int)(admin_groups[0]); j++) | |
3675 | if (admin_groups[j] == group_list[i]) | |
3676 | { admin_user = TRUE; break; } | |
3677 | } | |
3678 | if (admin_user) break; | |
3679 | } | |
3680 | } | |
3681 | ||
3682 | /* Another group of privileged users are the trusted users. These are root, | |
3683 | exim, and any caller matching trusted_users or trusted_groups. Trusted callers | |
3684 | are permitted to specify sender_addresses with -f on the command line, and | |
3685 | other message parameters as well. */ | |
3686 | ||
3687 | if (real_uid == root_uid || real_uid == exim_uid) | |
3688 | trusted_caller = TRUE; | |
3689 | else | |
3690 | { | |
3691 | int i, j; | |
3692 | ||
3693 | if (trusted_users != NULL) | |
3694 | { | |
3695 | for (i = 1; i <= (int)(trusted_users[0]); i++) | |
3696 | if (trusted_users[i] == real_uid) | |
3697 | { trusted_caller = TRUE; break; } | |
3698 | } | |
3699 | ||
3700 | if (!trusted_caller && trusted_groups != NULL) | |
3701 | { | |
3702 | for (i = 1; i <= (int)(trusted_groups[0]); i++) | |
3703 | { | |
3704 | if (trusted_groups[i] == real_gid) | |
3705 | trusted_caller = TRUE; | |
3706 | else for (j = 0; j < group_count; j++) | |
3707 | { | |
3708 | if (trusted_groups[i] == group_list[j]) | |
3709 | { trusted_caller = TRUE; break; } | |
3710 | } | |
3711 | if (trusted_caller) break; | |
3712 | } | |
3713 | } | |
3714 | } | |
3715 | ||
059ec3d9 PH |
3716 | /* Handle the decoding of logging options. */ |
3717 | ||
ed7f7860 PP |
3718 | decode_bits(&log_write_selector, &log_extra_selector, 0, 0, |
3719 | log_selector_string, log_options, log_options_count, US"log", 0); | |
059ec3d9 PH |
3720 | |
3721 | DEBUG(D_any) | |
3722 | { | |
3723 | debug_printf("configuration file is %s\n", config_main_filename); | |
3724 | debug_printf("log selectors = %08x %08x\n", log_write_selector, | |
3725 | log_extra_selector); | |
3726 | } | |
3727 | ||
3728 | /* If domain literals are not allowed, check the sender address that was | |
3729 | supplied with -f. Ditto for a stripped trailing dot. */ | |
3730 | ||
3731 | if (sender_address != NULL) | |
3732 | { | |
3733 | if (sender_address[sender_address_domain] == '[' && !allow_domain_literals) | |
3734 | { | |
3735 | fprintf(stderr, "exim: bad -f address \"%s\": domain literals not " | |
3736 | "allowed\n", sender_address); | |
3737 | return EXIT_FAILURE; | |
3738 | } | |
3739 | if (f_end_dot && !strip_trailing_dot) | |
3740 | { | |
3741 | fprintf(stderr, "exim: bad -f address \"%s.\": domain is malformed " | |
3742 | "(trailing dot not allowed)\n", sender_address); | |
3743 | return EXIT_FAILURE; | |
3744 | } | |
3745 | } | |
3746 | ||
a3fb9793 PP |
3747 | /* See if an admin user overrode our logging. */ |
3748 | ||
3749 | if (cmdline_syslog_name != NULL) | |
3750 | { | |
3751 | if (admin_user) | |
3752 | { | |
3753 | syslog_processname = cmdline_syslog_name; | |
3754 | log_file_path = string_copy(CUS"syslog"); | |
3755 | } | |
3756 | else | |
3757 | { | |
3758 | /* not a panic, non-privileged users should not be able to spam paniclog */ | |
3759 | fprintf(stderr, | |
3760 | "exim: you lack sufficient privilege to specify syslog process name\n"); | |
3761 | return EXIT_FAILURE; | |
3762 | } | |
3763 | } | |
3764 | ||
059ec3d9 PH |
3765 | /* Paranoia check of maximum lengths of certain strings. There is a check |
3766 | on the length of the log file path in log.c, which will come into effect | |
3767 | if there are any calls to write the log earlier than this. However, if we | |
3768 | get this far but the string is very long, it is better to stop now than to | |
3769 | carry on and (e.g.) receive a message and then have to collapse. The call to | |
3770 | log_write() from here will cause the ultimate panic collapse if the complete | |
3771 | file name exceeds the buffer length. */ | |
3772 | ||
3773 | if (Ustrlen(log_file_path) > 200) | |
3774 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, | |
3775 | "log_file_path is longer than 200 chars: aborting"); | |
3776 | ||
3777 | if (Ustrlen(pid_file_path) > 200) | |
3778 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, | |
3779 | "pid_file_path is longer than 200 chars: aborting"); | |
3780 | ||
3781 | if (Ustrlen(spool_directory) > 200) | |
3782 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, | |
3783 | "spool_directory is longer than 200 chars: aborting"); | |
3784 | ||
3785 | /* Length check on the process name given to syslog for its TAG field, | |
3786 | which is only permitted to be 32 characters or less. See RFC 3164. */ | |
3787 | ||
3788 | if (Ustrlen(syslog_processname) > 32) | |
3789 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, | |
3790 | "syslog_processname is longer than 32 chars: aborting"); | |
3791 | ||
3792 | /* In some operating systems, the environment variable TMPDIR controls where | |
3793 | temporary files are created; Exim doesn't use these (apart from when delivering | |
3794 | to MBX mailboxes), but called libraries such as DBM libraries may require them. | |
3795 | If TMPDIR is found in the environment, reset it to the value defined in the | |
3796 | TMPDIR macro, if this macro is defined. */ | |
3797 | ||
3798 | #ifdef TMPDIR | |
3799 | { | |
3800 | uschar **p; | |
3801 | for (p = USS environ; *p != NULL; p++) | |
3802 | { | |
3803 | if (Ustrncmp(*p, "TMPDIR=", 7) == 0 && | |
3804 | Ustrcmp(*p+7, TMPDIR) != 0) | |
3805 | { | |
3806 | uschar *newp = malloc(Ustrlen(TMPDIR) + 8); | |
3807 | sprintf(CS newp, "TMPDIR=%s", TMPDIR); | |
3808 | *p = newp; | |
3809 | DEBUG(D_any) debug_printf("reset TMPDIR=%s in environment\n", TMPDIR); | |
3810 | } | |
3811 | } | |
3812 | } | |
3813 | #endif | |
3814 | ||
3815 | /* Timezone handling. If timezone_string is "utc", set a flag to cause all | |
3816 | timestamps to be in UTC (gmtime() is used instead of localtime()). Otherwise, | |
3817 | we may need to get rid of a bogus timezone setting. This can arise when Exim is | |
3818 | called by a user who has set the TZ variable. This then affects the timestamps | |
3819 | in log files and in Received: headers, and any created Date: header lines. The | |
3820 | required timezone is settable in the configuration file, so nothing can be done | |
3821 | about this earlier - but hopefully nothing will normally be logged earlier than | |
3822 | this. We have to make a new environment if TZ is wrong, but don't bother if | |
3823 | timestamps_utc is set, because then all times are in UTC anyway. */ | |
3824 | ||
3825 | if (timezone_string != NULL && strcmpic(timezone_string, US"UTC") == 0) | |
3826 | { | |
3827 | timestamps_utc = TRUE; | |
3828 | } | |
3829 | else | |
3830 | { | |
3831 | uschar *envtz = US getenv("TZ"); | |
3832 | if ((envtz == NULL && timezone_string != NULL) || | |
3833 | (envtz != NULL && | |
3834 | (timezone_string == NULL || | |
3835 | Ustrcmp(timezone_string, envtz) != 0))) | |
3836 | { | |
3837 | uschar **p = USS environ; | |
3838 | uschar **new; | |
3839 | uschar **newp; | |
3840 | int count = 0; | |
3841 | while (*p++ != NULL) count++; | |
3842 | if (envtz == NULL) count++; | |
3843 | newp = new = malloc(sizeof(uschar *) * (count + 1)); | |
3844 | for (p = USS environ; *p != NULL; p++) | |
3845 | { | |
3846 | if (Ustrncmp(*p, "TZ=", 3) == 0) continue; | |
3847 | *newp++ = *p; | |
3848 | } | |
3849 | if (timezone_string != NULL) | |
3850 | { | |
3851 | *newp = malloc(Ustrlen(timezone_string) + 4); | |
3852 | sprintf(CS *newp++, "TZ=%s", timezone_string); | |
3853 | } | |
3854 | *newp = NULL; | |
3855 | environ = CSS new; | |
3856 | tzset(); | |
3857 | DEBUG(D_any) debug_printf("Reset TZ to %s: time is %s\n", timezone_string, | |
3858 | tod_stamp(tod_log)); | |
3859 | } | |
3860 | } | |
3861 | ||
3862 | /* Handle the case when we have removed the setuid privilege because of -C or | |
cd25e41d | 3863 | -D. This means that the caller of Exim was not root. |
059ec3d9 | 3864 | |
cd25e41d DW |
3865 | There is a problem if we were running as the Exim user. The sysadmin may |
3866 | expect this case to retain privilege because "the binary was called by the | |
3867 | Exim user", but it hasn't, because either the -D option set macros, or the | |
261dc43e | 3868 | -C option set a non-trusted configuration file. There are two possibilities: |
059ec3d9 PH |
3869 | |
3870 | (1) If deliver_drop_privilege is set, Exim is not going to re-exec in order | |
3871 | to do message deliveries. Thus, the fact that it is running as a | |
3872 | non-privileged user is plausible, and might be wanted in some special | |
3873 | configurations. However, really_exim will have been set false when | |
3874 | privilege was dropped, to stop Exim trying to write to its normal log | |
3875 | files. Therefore, re-enable normal log processing, assuming the sysadmin | |
3876 | has set up the log directory correctly. | |
3877 | ||
3878 | (2) If deliver_drop_privilege is not set, the configuration won't work as | |
3879 | apparently intended, and so we log a panic message. In order to retain | |
261dc43e DW |
3880 | root for -C or -D, the caller must either be root or be invoking a |
3881 | trusted configuration file (when deliver_drop_privilege is false). */ | |
059ec3d9 | 3882 | |
e2f5dc15 | 3883 | if (removed_privilege && (!trusted_config || macros != NULL) && |
059ec3d9 PH |
3884 | real_uid == exim_uid) |
3885 | { | |
059ec3d9 PH |
3886 | if (deliver_drop_privilege) |
3887 | really_exim = TRUE; /* let logging work normally */ | |
3888 | else | |
3889 | log_write(0, LOG_MAIN|LOG_PANIC, | |
cd25e41d | 3890 | "exim user lost privilege for using %s option", |
90b6341f | 3891 | trusted_config? "-D" : "-C"); |
059ec3d9 PH |
3892 | } |
3893 | ||
3894 | /* Start up Perl interpreter if Perl support is configured and there is a | |
3895 | perl_startup option, and the configuration or the command line specifies | |
3896 | initializing starting. Note that the global variables are actually called | |
3897 | opt_perl_xxx to avoid clashing with perl's namespace (perl_*). */ | |
3898 | ||
3899 | #ifdef EXIM_PERL | |
3900 | if (perl_start_option != 0) | |
3901 | opt_perl_at_start = (perl_start_option > 0); | |
3902 | if (opt_perl_at_start && opt_perl_startup != NULL) | |
3903 | { | |
3904 | uschar *errstr; | |
3905 | DEBUG(D_any) debug_printf("Starting Perl interpreter\n"); | |
3906 | errstr = init_perl(opt_perl_startup); | |
3907 | if (errstr != NULL) | |
3908 | { | |
3909 | fprintf(stderr, "exim: error in perl_startup code: %s\n", errstr); | |
3910 | return EXIT_FAILURE; | |
3911 | } | |
3912 | opt_perl_started = TRUE; | |
3913 | } | |
3914 | #endif /* EXIM_PERL */ | |
3915 | ||
3916 | /* Log the arguments of the call if the configuration file said so. This is | |
3917 | a debugging feature for finding out what arguments certain MUAs actually use. | |
3918 | Don't attempt it if logging is disabled, or if listing variables or if | |
3919 | verifying/testing addresses or expansions. */ | |
3920 | ||
31619da6 PH |
3921 | if (((debug_selector & D_any) != 0 || (log_extra_selector & LX_arguments) != 0) |
3922 | && really_exim && !list_options && !checking) | |
059ec3d9 PH |
3923 | { |
3924 | int i; | |
3925 | uschar *p = big_buffer; | |
1ac6b2e7 JH |
3926 | char * dummy; |
3927 | Ustrcpy(p, "cwd= (failed)"); | |
3928 | dummy = /* quieten compiler */ getcwd(CS p+4, big_buffer_size - 4); | |
059ec3d9 PH |
3929 | while (*p) p++; |
3930 | (void)string_format(p, big_buffer_size - (p - big_buffer), " %d args:", argc); | |
3931 | while (*p) p++; | |
3932 | for (i = 0; i < argc; i++) | |
3933 | { | |
3934 | int len = Ustrlen(argv[i]); | |
3935 | uschar *printing; | |
3936 | uschar *quote; | |
3937 | if (p + len + 8 >= big_buffer + big_buffer_size) | |
3938 | { | |
3939 | Ustrcpy(p, " ..."); | |
3940 | log_write(0, LOG_MAIN, "%s", big_buffer); | |
3941 | Ustrcpy(big_buffer, "..."); | |
3942 | p = big_buffer + 3; | |
3943 | } | |
3944 | printing = string_printing(argv[i]); | |
3945 | if (printing[0] == 0) quote = US"\""; else | |
3946 | { | |
3947 | uschar *pp = printing; | |
3948 | quote = US""; | |
3949 | while (*pp != 0) if (isspace(*pp++)) { quote = US"\""; break; } | |
3950 | } | |
3951 | sprintf(CS p, " %s%.*s%s", quote, (int)(big_buffer_size - | |
3952 | (p - big_buffer) - 4), printing, quote); | |
3953 | while (*p) p++; | |
3954 | } | |
31619da6 PH |
3955 | |
3956 | if ((log_extra_selector & LX_arguments) != 0) | |
3957 | log_write(0, LOG_MAIN, "%s", big_buffer); | |
3958 | else | |
3959 | debug_printf("%s\n", big_buffer); | |
059ec3d9 PH |
3960 | } |
3961 | ||
3962 | /* Set the working directory to be the top-level spool directory. We don't rely | |
3963 | on this in the code, which always uses fully qualified names, but it's useful | |
3964 | for core dumps etc. Don't complain if it fails - the spool directory might not | |
3965 | be generally accessible and calls with the -C option (and others) have lost | |
ba18e66a PH |
3966 | privilege by now. Before the chdir, we try to ensure that the directory exists. |
3967 | */ | |
059ec3d9 PH |
3968 | |
3969 | if (Uchdir(spool_directory) != 0) | |
3970 | { | |
1ac6b2e7 | 3971 | int dummy; |
ba18e66a | 3972 | (void)directory_make(spool_directory, US"", SPOOL_DIRECTORY_MODE, FALSE); |
1ac6b2e7 | 3973 | dummy = /* quieten compiler */ Uchdir(spool_directory); |
059ec3d9 PH |
3974 | } |
3975 | ||
3976 | /* Handle calls with the -bi option. This is a sendmail option to rebuild *the* | |
3977 | alias file. Exim doesn't have such a concept, but this call is screwed into | |
3978 | Sun's YP makefiles. Handle this by calling a configured script, as the real | |
3979 | user who called Exim. The -oA option can be used to pass an argument to the | |
3980 | script. */ | |
3981 | ||
3982 | if (bi_option) | |
3983 | { | |
1fe64dcc | 3984 | (void)fclose(config_file); |
059ec3d9 PH |
3985 | if (bi_command != NULL) |
3986 | { | |
3987 | int i = 0; | |
3988 | uschar *argv[3]; | |
3989 | argv[i++] = bi_command; | |
3990 | if (alias_arg != NULL) argv[i++] = alias_arg; | |
3991 | argv[i++] = NULL; | |
3992 | ||
3993 | setgroups(group_count, group_list); | |
3994 | exim_setugid(real_uid, real_gid, FALSE, US"running bi_command"); | |
3995 | ||
3996 | DEBUG(D_exec) debug_printf("exec %.256s %.256s\n", argv[0], | |
3997 | (argv[1] == NULL)? US"" : argv[1]); | |
3998 | ||
3999 | execv(CS argv[0], (char *const *)argv); | |
4000 | fprintf(stderr, "exim: exec failed: %s\n", strerror(errno)); | |
4001 | exit(EXIT_FAILURE); | |
4002 | } | |
4003 | else | |
4004 | { | |
4005 | DEBUG(D_any) debug_printf("-bi used but bi_command not set; exiting\n"); | |
4006 | exit(EXIT_SUCCESS); | |
4007 | } | |
4008 | } | |
4009 | ||
a3fb9793 PP |
4010 | /* We moved the admin/trusted check to be immediately after reading the |
4011 | configuration file. We leave these prints here to ensure that syslog setup, | |
4012 | logfile setup, and so on has already happened. */ | |
059ec3d9 PH |
4013 | |
4014 | if (trusted_caller) DEBUG(D_any) debug_printf("trusted user\n"); | |
4015 | if (admin_user) DEBUG(D_any) debug_printf("admin user\n"); | |
4016 | ||
4017 | /* Only an admin user may start the daemon or force a queue run in the default | |
4018 | configuration, but the queue run restriction can be relaxed. Only an admin | |
4019 | user may request that a message be returned to its sender forthwith. Only an | |
4020 | admin user may specify a debug level greater than D_v (because it might show | |
4021 | passwords, etc. in lookup queries). Only an admin user may request a queue | |
8544e77a PP |
4022 | count. Only an admin user can use the test interface to scan for email |
4023 | (because Exim will be in the spool dir and able to look at mails). */ | |
059ec3d9 PH |
4024 | |
4025 | if (!admin_user) | |
4026 | { | |
4027 | BOOL debugset = (debug_selector & ~D_v) != 0; | |
8544e77a | 4028 | if (deliver_give_up || daemon_listen || malware_test_file || |
059ec3d9 PH |
4029 | (count_queue && queue_list_requires_admin) || |
4030 | (list_queue && queue_list_requires_admin) || | |
4031 | (queue_interval >= 0 && prod_requires_admin) || | |
4032 | (debugset && !running_in_test_harness)) | |
4033 | { | |
4034 | fprintf(stderr, "exim:%s permission denied\n", debugset? " debugging" : ""); | |
4035 | exit(EXIT_FAILURE); | |
4036 | } | |
4037 | } | |
4038 | ||
4039 | /* If the real user is not root or the exim uid, the argument for passing | |
4040 | in an open TCP/IP connection for another message is not permitted, nor is | |
4041 | running with the -N option for any delivery action, unless this call to exim is | |
4042 | one that supplied an input message, or we are using a patched exim for | |
4043 | regression testing. */ | |
4044 | ||
4045 | if (real_uid != root_uid && real_uid != exim_uid && | |
4046 | (continue_hostname != NULL || | |
4047 | (dont_deliver && | |
4048 | (queue_interval >= 0 || daemon_listen || msg_action_arg > 0) | |
4049 | )) && !running_in_test_harness) | |
4050 | { | |
4051 | fprintf(stderr, "exim: Permission denied\n"); | |
4052 | return EXIT_FAILURE; | |
4053 | } | |
4054 | ||
4055 | /* If the caller is not trusted, certain arguments are ignored when running for | |
f05da2e8 PH |
4056 | real, but are permitted when checking things (-be, -bv, -bt, -bh, -bf, -bF). |
4057 | Note that authority for performing certain actions on messages is tested in the | |
059ec3d9 PH |
4058 | queue_action() function. */ |
4059 | ||
f05da2e8 | 4060 | if (!trusted_caller && !checking && filter_test == FTEST_NONE) |
059ec3d9 PH |
4061 | { |
4062 | sender_host_name = sender_host_address = interface_address = | |
4063 | sender_ident = received_protocol = NULL; | |
4064 | sender_host_port = interface_port = 0; | |
4065 | sender_host_authenticated = authenticated_sender = authenticated_id = NULL; | |
4066 | } | |
4067 | ||
4068 | /* If a sender host address is set, extract the optional port number off the | |
4069 | end of it and check its syntax. Do the same thing for the interface address. | |
4070 | Exim exits if the syntax is bad. */ | |
4071 | ||
4072 | else | |
4073 | { | |
4074 | if (sender_host_address != NULL) | |
4075 | sender_host_port = check_port(sender_host_address); | |
4076 | if (interface_address != NULL) | |
4077 | interface_port = check_port(interface_address); | |
4078 | } | |
4079 | ||
f4ee74ac PP |
4080 | /* If the caller is trusted, then they can use -G to suppress_local_fixups. */ |
4081 | if (flag_G) | |
4082 | { | |
4083 | if (trusted_caller) | |
4084 | { | |
4085 | suppress_local_fixups = suppress_local_fixups_default = TRUE; | |
4086 | DEBUG(D_acl) debug_printf("suppress_local_fixups forced on by -G\n"); | |
4087 | } | |
4088 | else | |
4089 | { | |
4090 | fprintf(stderr, "exim: permission denied (-G requires a trusted user)\n"); | |
4091 | return EXIT_FAILURE; | |
4092 | } | |
4093 | } | |
4094 | ||
059ec3d9 PH |
4095 | /* If an SMTP message is being received check to see if the standard input is a |
4096 | TCP/IP socket. If it is, we assume that Exim was called from inetd if the | |
4097 | caller is root or the Exim user, or if the port is a privileged one. Otherwise, | |
4098 | barf. */ | |
4099 | ||
4100 | if (smtp_input) | |
4101 | { | |
4102 | union sockaddr_46 inetd_sock; | |
36a3b041 | 4103 | EXIM_SOCKLEN_T size = sizeof(inetd_sock); |
059ec3d9 PH |
4104 | if (getpeername(0, (struct sockaddr *)(&inetd_sock), &size) == 0) |
4105 | { | |
4106 | int family = ((struct sockaddr *)(&inetd_sock))->sa_family; | |
4107 | if (family == AF_INET || family == AF_INET6) | |
4108 | { | |
4109 | union sockaddr_46 interface_sock; | |
4110 | size = sizeof(interface_sock); | |
4111 | ||
4112 | if (getsockname(0, (struct sockaddr *)(&interface_sock), &size) == 0) | |
4113 | interface_address = host_ntoa(-1, &interface_sock, NULL, | |
4114 | &interface_port); | |
4115 | ||
817d9f57 | 4116 | if (host_is_tls_on_connect_port(interface_port)) tls_in.on_connect = TRUE; |
059ec3d9 PH |
4117 | |
4118 | if (real_uid == root_uid || real_uid == exim_uid || interface_port < 1024) | |
4119 | { | |
4120 | is_inetd = TRUE; | |
4121 | sender_host_address = host_ntoa(-1, (struct sockaddr *)(&inetd_sock), | |
4122 | NULL, &sender_host_port); | |
4123 | if (mua_wrapper) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Input from " | |
4124 | "inetd is not supported when mua_wrapper is set"); | |
4125 | } | |
4126 | else | |
4127 | { | |
4128 | fprintf(stderr, | |
4129 | "exim: Permission denied (unprivileged user, unprivileged port)\n"); | |
4130 | return EXIT_FAILURE; | |
4131 | } | |
4132 | } | |
4133 | } | |
4134 | } | |
4135 | ||
4136 | /* If the load average is going to be needed while receiving a message, get it | |
4137 | now for those OS that require the first call to os_getloadavg() to be done as | |
4138 | root. There will be further calls later for each message received. */ | |
4139 | ||
4140 | #ifdef LOAD_AVG_NEEDS_ROOT | |
4141 | if (receiving_message && | |
4142 | (queue_only_load >= 0 || | |
4143 | (is_inetd && smtp_load_reserve >= 0) | |
4144 | )) | |
4145 | { | |
8669f003 | 4146 | load_average = OS_GETLOADAVG(); |
059ec3d9 PH |
4147 | } |
4148 | #endif | |
4149 | ||
4150 | /* The queue_only configuration option can be overridden by -odx on the command | |
4151 | line, except that if queue_only_override is false, queue_only cannot be unset | |
4152 | from the command line. */ | |
4153 | ||
4154 | if (queue_only_set && (queue_only_override || arg_queue_only)) | |
4155 | queue_only = arg_queue_only; | |
4156 | ||
4157 | /* The receive_timeout and smtp_receive_timeout options can be overridden by | |
4158 | -or and -os. */ | |
4159 | ||
4160 | if (arg_receive_timeout >= 0) receive_timeout = arg_receive_timeout; | |
4161 | if (arg_smtp_receive_timeout >= 0) | |
4162 | smtp_receive_timeout = arg_smtp_receive_timeout; | |
4163 | ||
4164 | /* If Exim was started with root privilege, unless we have already removed the | |
4165 | root privilege above as a result of -C, -D, -be, -bf or -bF, remove it now | |
4166 | except when starting the daemon or doing some kind of delivery or address | |
4167 | testing (-bt). These are the only cases when root need to be retained. We run | |
4168 | as exim for -bv and -bh. However, if deliver_drop_privilege is set, root is | |
805e5aab TF |
4169 | retained only for starting the daemon. We always do the initgroups() in this |
4170 | situation (controlled by the TRUE below), in order to be as close as possible | |
4171 | to the state Exim usually runs in. */ | |
059ec3d9 PH |
4172 | |
4173 | if (!unprivileged && /* originally had root AND */ | |
4174 | !removed_privilege && /* still got root AND */ | |
4175 | !daemon_listen && /* not starting the daemon */ | |
4176 | queue_interval <= 0 && /* (either kind of daemon) */ | |
4177 | ( /* AND EITHER */ | |
4178 | deliver_drop_privilege || /* requested unprivileged */ | |
4179 | ( /* OR */ | |
4180 | queue_interval < 0 && /* not running the queue */ | |
4181 | (msg_action_arg < 0 || /* and */ | |
4182 | msg_action != MSG_DELIVER) && /* not delivering and */ | |
4183 | (!checking || !address_test_mode) /* not address checking */ | |
4184 | ) | |
4185 | )) | |
4186 | { | |
805e5aab | 4187 | exim_setugid(exim_uid, exim_gid, TRUE, US"privilege not needed"); |
059ec3d9 PH |
4188 | } |
4189 | ||
4190 | /* When we are retaining a privileged uid, we still change to the exim gid. */ | |
4191 | ||
1670ef10 PP |
4192 | else |
4193 | { | |
4194 | int rv; | |
4195 | rv = setgid(exim_gid); | |
4196 | /* Impact of failure is that some stuff might end up with an incorrect group. | |
4197 | We track this for failures from root, since any attempt to change privilege | |
4198 | by root should succeed and failures should be examined. For non-root, | |
4199 | there's no security risk. For me, it's { exim -bV } on a just-built binary, | |
4200 | no need to complain then. */ | |
4201 | if (rv == -1) | |
4202 | { | |
33191679 | 4203 | if (!(unprivileged || removed_privilege)) |
1670ef10 PP |
4204 | { |
4205 | fprintf(stderr, | |
4206 | "exim: changing group failed: %s\n", strerror(errno)); | |
4207 | exit(EXIT_FAILURE); | |
4208 | } | |
4209 | else | |
33191679 | 4210 | DEBUG(D_any) debug_printf("changing group to %ld failed: %s\n", |
1670ef10 PP |
4211 | (long int)exim_gid, strerror(errno)); |
4212 | } | |
4213 | } | |
059ec3d9 | 4214 | |
8544e77a PP |
4215 | /* Handle a request to scan a file for malware */ |
4216 | if (malware_test_file) | |
4217 | { | |
dbc4b90d | 4218 | #ifdef WITH_CONTENT_SCAN |
8544e77a PP |
4219 | int result; |
4220 | set_process_info("scanning file for malware"); | |
4221 | result = malware_in_file(malware_test_file); | |
4222 | if (result == FAIL) | |
4223 | { | |
4224 | printf("No malware found.\n"); | |
4225 | exit(EXIT_SUCCESS); | |
4226 | } | |
4227 | if (result != OK) | |
4228 | { | |
4229 | printf("Malware lookup returned non-okay/fail: %d\n", result); | |
4230 | exit(EXIT_FAILURE); | |
4231 | } | |
4232 | if (malware_name) | |
4233 | printf("Malware found: %s\n", malware_name); | |
4234 | else | |
4235 | printf("Malware scan detected malware of unknown name.\n"); | |
dbc4b90d PP |
4236 | #else |
4237 | printf("Malware scanning not enabled at compile time.\n"); | |
4238 | #endif | |
8544e77a PP |
4239 | exit(EXIT_FAILURE); |
4240 | } | |
4241 | ||
059ec3d9 PH |
4242 | /* Handle a request to list the delivery queue */ |
4243 | ||
4244 | if (list_queue) | |
4245 | { | |
4246 | set_process_info("listing the queue"); | |
4247 | queue_list(list_queue_option, argv + recipients_arg, argc - recipients_arg); | |
4248 | exit(EXIT_SUCCESS); | |
4249 | } | |
4250 | ||
4251 | /* Handle a request to count the delivery queue */ | |
4252 | ||
4253 | if (count_queue) | |
4254 | { | |
4255 | set_process_info("counting the queue"); | |
4256 | queue_count(); | |
4257 | exit(EXIT_SUCCESS); | |
4258 | } | |
4259 | ||
0ef732d9 PH |
4260 | /* Handle actions on specific messages, except for the force delivery and |
4261 | message load actions, which are done below. Some actions take a whole list of | |
4262 | message ids, which are known to continue up to the end of the arguments. Others | |
4263 | take a single message id and then operate on the recipients list. */ | |
059ec3d9 | 4264 | |
0ef732d9 | 4265 | if (msg_action_arg > 0 && msg_action != MSG_DELIVER && msg_action != MSG_LOAD) |
059ec3d9 PH |
4266 | { |
4267 | int yield = EXIT_SUCCESS; | |
4268 | set_process_info("acting on specified messages"); | |
4269 | ||
4270 | if (!one_msg_action) | |
4271 | { | |
4272 | for (i = msg_action_arg; i < argc; i++) | |
4273 | if (!queue_action(argv[i], msg_action, NULL, 0, 0)) | |
4274 | yield = EXIT_FAILURE; | |
4275 | } | |
4276 | ||
4277 | else if (!queue_action(argv[msg_action_arg], msg_action, argv, argc, | |
4278 | recipients_arg)) yield = EXIT_FAILURE; | |
4279 | exit(yield); | |
4280 | } | |
4281 | ||
cb46fd2b JH |
4282 | /* We used to set up here to skip reading the ACL section, on |
4283 | (msg_action_arg > 0 || (queue_interval == 0 && !daemon_listen) | |
4284 | Now, since the intro of the ${acl } expansion, ACL definitions may be | |
4285 | needed in transports so we lost the optimisation. */ | |
059ec3d9 | 4286 | |
cb46fd2b | 4287 | readconf_rest(); |
059ec3d9 PH |
4288 | |
4289 | /* The configuration data will have been read into POOL_PERM because we won't | |
4290 | ever want to reset back past it. Change the current pool to POOL_MAIN. In fact, | |
4291 | this is just a bit of pedantic tidiness. It wouldn't really matter if the | |
4292 | configuration were read into POOL_MAIN, because we don't do any resets till | |
4293 | later on. However, it seems right, and it does ensure that both pools get used. | |
4294 | */ | |
4295 | ||
4296 | store_pool = POOL_MAIN; | |
4297 | ||
4298 | /* Handle the -brt option. This is for checking out retry configurations. | |
4299 | The next three arguments are a domain name or a complete address, and | |
4300 | optionally two error numbers. All it does is to call the function that | |
4301 | scans the retry configuration data. */ | |
4302 | ||
4303 | if (test_retry_arg >= 0) | |
4304 | { | |
4305 | retry_config *yield; | |
4306 | int basic_errno = 0; | |
4307 | int more_errno = 0; | |
4308 | uschar *s1, *s2; | |
4309 | ||
4310 | if (test_retry_arg >= argc) | |
4311 | { | |
4312 | printf("-brt needs a domain or address argument\n"); | |
4313 | exim_exit(EXIT_FAILURE); | |
4314 | } | |
4315 | s1 = argv[test_retry_arg++]; | |
4316 | s2 = NULL; | |
4317 | ||
4318 | /* If the first argument contains no @ and no . it might be a local user | |
4319 | or it might be a single-component name. Treat as a domain. */ | |
4320 | ||
4321 | if (Ustrchr(s1, '@') == NULL && Ustrchr(s1, '.') == NULL) | |
4322 | { | |
4323 | printf("Warning: \"%s\" contains no '@' and no '.' characters. It is " | |
4324 | "being \ntreated as a one-component domain, not as a local part.\n\n", | |
4325 | s1); | |
4326 | } | |
4327 | ||
4328 | /* There may be an optional second domain arg. */ | |
4329 | ||
4330 | if (test_retry_arg < argc && Ustrchr(argv[test_retry_arg], '.') != NULL) | |
4331 | s2 = argv[test_retry_arg++]; | |
4332 | ||
4333 | /* The final arg is an error name */ | |
4334 | ||
4335 | if (test_retry_arg < argc) | |
4336 | { | |
4337 | uschar *ss = argv[test_retry_arg]; | |
4338 | uschar *error = | |
4339 | readconf_retry_error(ss, ss + Ustrlen(ss), &basic_errno, &more_errno); | |
4340 | if (error != NULL) | |
4341 | { | |
4342 | printf("%s\n", CS error); | |
4343 | return EXIT_FAILURE; | |
4344 | } | |
4345 | ||
e97957bc PH |
4346 | /* For the {MAIL,RCPT,DATA}_4xx errors, a value of 255 means "any", and a |
4347 | code > 100 as an error is for matching codes to the decade. Turn them into | |
4348 | a real error code, off the decade. */ | |
059ec3d9 | 4349 | |
e97957bc PH |
4350 | if (basic_errno == ERRNO_MAIL4XX || |
4351 | basic_errno == ERRNO_RCPT4XX || | |
4352 | basic_errno == ERRNO_DATA4XX) | |
059ec3d9 PH |
4353 | { |
4354 | int code = (more_errno >> 8) & 255; | |
4355 | if (code == 255) | |
4356 | more_errno = (more_errno & 0xffff00ff) | (21 << 8); | |
4357 | else if (code > 100) | |
4358 | more_errno = (more_errno & 0xffff00ff) | ((code - 96) << 8); | |
4359 | } | |
4360 | } | |
4361 | ||
4362 | yield = retry_find_config(s1, s2, basic_errno, more_errno); | |
4363 | if (yield == NULL) printf("No retry information found\n"); else | |
4364 | { | |
4365 | retry_rule *r; | |
4366 | more_errno = yield->more_errno; | |
4367 | printf("Retry rule: %s ", yield->pattern); | |
4368 | ||
4369 | if (yield->basic_errno == ERRNO_EXIMQUOTA) | |
4370 | { | |
4371 | printf("quota%s%s ", | |
4372 | (more_errno > 0)? "_" : "", | |
4373 | (more_errno > 0)? readconf_printtime(more_errno) : US""); | |
4374 | } | |
4375 | else if (yield->basic_errno == ECONNREFUSED) | |
4376 | { | |
4377 | printf("refused%s%s ", | |
4378 | (more_errno > 0)? "_" : "", | |
4379 | (more_errno == 'M')? "MX" : | |
4380 | (more_errno == 'A')? "A" : ""); | |
4381 | } | |
4382 | else if (yield->basic_errno == ETIMEDOUT) | |
4383 | { | |
4384 | printf("timeout"); | |
4385 | if ((more_errno & RTEF_CTOUT) != 0) printf("_connect"); | |
4386 | more_errno &= 255; | |
4387 | if (more_errno != 0) printf("_%s", | |
4388 | (more_errno == 'M')? "MX" : "A"); | |
4389 | printf(" "); | |
4390 | } | |
4391 | else if (yield->basic_errno == ERRNO_AUTHFAIL) | |
4392 | printf("auth_failed "); | |
4393 | else printf("* "); | |
4394 | ||
4395 | for (r = yield->rules; r != NULL; r = r->next) | |
4396 | { | |
4397 | printf("%c,%s", r->rule, readconf_printtime(r->timeout)); /* Do not */ | |
4398 | printf(",%s", readconf_printtime(r->p1)); /* amalgamate */ | |
4399 | if (r->rule == 'G') | |
4400 | { | |
4401 | int x = r->p2; | |
4402 | int f = x % 1000; | |
4403 | int d = 100; | |
4404 | printf(",%d.", x/1000); | |
4405 | do | |
4406 | { | |
4407 | printf("%d", f/d); | |
4408 | f %= d; | |
4409 | d /= 10; | |
4410 | } | |
4411 | while (f != 0); | |
4412 | } | |
4413 | printf("; "); | |
4414 | } | |
4415 | ||
4416 | printf("\n"); | |
4417 | } | |
4418 | exim_exit(EXIT_SUCCESS); | |
4419 | } | |
4420 | ||
4421 | /* Handle a request to list one or more configuration options */ | |
12f69989 | 4422 | /* If -n was set, we suppress some information */ |
059ec3d9 PH |
4423 | |
4424 | if (list_options) | |
4425 | { | |
4426 | set_process_info("listing variables"); | |
12f69989 | 4427 | if (recipients_arg >= argc) readconf_print(US"all", NULL, flag_n); |
059ec3d9 PH |
4428 | else for (i = recipients_arg; i < argc; i++) |
4429 | { | |
4430 | if (i < argc - 1 && | |
4431 | (Ustrcmp(argv[i], "router") == 0 || | |
4432 | Ustrcmp(argv[i], "transport") == 0 || | |
5d9c27ec TK |
4433 | Ustrcmp(argv[i], "authenticator") == 0 || |
4434 | Ustrcmp(argv[i], "macro") == 0)) | |
059ec3d9 | 4435 | { |
12f69989 | 4436 | readconf_print(argv[i+1], argv[i], flag_n); |
059ec3d9 PH |
4437 | i++; |
4438 | } | |
12f69989 | 4439 | else readconf_print(argv[i], NULL, flag_n); |
059ec3d9 PH |
4440 | } |
4441 | exim_exit(EXIT_SUCCESS); | |
4442 | } | |
4443 | ||
4444 | ||
4445 | /* Handle a request to deliver one or more messages that are already on the | |
0ef732d9 PH |
4446 | queue. Values of msg_action other than MSG_DELIVER and MSG_LOAD are dealt with |
4447 | above. MSG_LOAD is handled with -be (which is the only time it applies) below. | |
4448 | ||
4449 | Delivery of specific messages is typically used for a small number when | |
4450 | prodding by hand (when the option forced_delivery will be set) or when | |
4451 | re-execing to regain root privilege. Each message delivery must happen in a | |
4452 | separate process, so we fork a process for each one, and run them sequentially | |
4453 | so that debugging output doesn't get intertwined, and to avoid spawning too | |
4454 | many processes if a long list is given. However, don't fork for the last one; | |
4455 | this saves a process in the common case when Exim is called to deliver just one | |
4456 | message. */ | |
4457 | ||
4458 | if (msg_action_arg > 0 && msg_action != MSG_LOAD) | |
059ec3d9 PH |
4459 | { |
4460 | if (prod_requires_admin && !admin_user) | |
4461 | { | |
4462 | fprintf(stderr, "exim: Permission denied\n"); | |
4463 | exim_exit(EXIT_FAILURE); | |
4464 | } | |
4465 | set_process_info("delivering specified messages"); | |
4466 | if (deliver_give_up) forced_delivery = deliver_force_thaw = TRUE; | |
4467 | for (i = msg_action_arg; i < argc; i++) | |
4468 | { | |
4469 | int status; | |
4470 | pid_t pid; | |
4471 | if (i == argc - 1) | |
4472 | (void)deliver_message(argv[i], forced_delivery, deliver_give_up); | |
4473 | else if ((pid = fork()) == 0) | |
4474 | { | |
4475 | (void)deliver_message(argv[i], forced_delivery, deliver_give_up); | |
4476 | _exit(EXIT_SUCCESS); | |
4477 | } | |
4478 | else if (pid < 0) | |
4479 | { | |
4480 | fprintf(stderr, "failed to fork delivery process for %s: %s\n", argv[i], | |
4481 | strerror(errno)); | |
4482 | exim_exit(EXIT_FAILURE); | |
4483 | } | |
4484 | else wait(&status); | |
4485 | } | |
4486 | exim_exit(EXIT_SUCCESS); | |
4487 | } | |
4488 | ||
4489 | ||
4490 | /* If only a single queue run is requested, without SMTP listening, we can just | |
4491 | turn into a queue runner, with an optional starting message id. */ | |
4492 | ||
4493 | if (queue_interval == 0 && !daemon_listen) | |
4494 | { | |
4495 | DEBUG(D_queue_run) debug_printf("Single queue run%s%s%s%s\n", | |
4496 | (start_queue_run_id == NULL)? US"" : US" starting at ", | |
4497 | (start_queue_run_id == NULL)? US"" : start_queue_run_id, | |
4498 | (stop_queue_run_id == NULL)? US"" : US" stopping at ", | |
4499 | (stop_queue_run_id == NULL)? US"" : stop_queue_run_id); | |
4500 | set_process_info("running the queue (single queue run)"); | |
4501 | queue_run(start_queue_run_id, stop_queue_run_id, FALSE); | |
4502 | exim_exit(EXIT_SUCCESS); | |
4503 | } | |
4504 | ||
4505 | ||
4506 | /* Find the login name of the real user running this process. This is always | |
4507 | needed when receiving a message, because it is written into the spool file. It | |
4508 | may also be used to construct a from: or a sender: header, and in this case we | |
4509 | need the user's full name as well, so save a copy of it, checked for RFC822 | |
4510 | syntax and munged if necessary, if it hasn't previously been set by the -F | |
4511 | argument. We may try to get the passwd entry more than once, in case NIS or | |
4512 | other delays are in evidence. Save the home directory for use in filter testing | |
4513 | (only). */ | |
4514 | ||
4515 | for (i = 0;;) | |
4516 | { | |
4517 | if ((pw = getpwuid(real_uid)) != NULL) | |
4518 | { | |
4519 | originator_login = string_copy(US pw->pw_name); | |
4520 | originator_home = string_copy(US pw->pw_dir); | |
4521 | ||
4522 | /* If user name has not been set by -F, set it from the passwd entry | |
4523 | unless -f has been used to set the sender address by a trusted user. */ | |
4524 | ||
4525 | if (originator_name == NULL) | |
4526 | { | |
4527 | if (sender_address == NULL || | |
f05da2e8 | 4528 | (!trusted_caller && filter_test == FTEST_NONE)) |
059ec3d9 PH |
4529 | { |
4530 | uschar *name = US pw->pw_gecos; | |
4531 | uschar *amp = Ustrchr(name, '&'); | |
4532 | uschar buffer[256]; | |
4533 | ||
4534 | /* Most Unix specify that a '&' character in the gecos field is | |
4535 | replaced by a copy of the login name, and some even specify that | |
4536 | the first character should be upper cased, so that's what we do. */ | |
4537 | ||
4538 | if (amp != NULL) | |
4539 | { | |
4540 | int loffset; | |
4541 | string_format(buffer, sizeof(buffer), "%.*s%n%s%s", | |
4542 | amp - name, name, &loffset, originator_login, amp + 1); | |
4543 | buffer[loffset] = toupper(buffer[loffset]); | |
4544 | name = buffer; | |
4545 | } | |
4546 | ||
4547 | /* If a pattern for matching the gecos field was supplied, apply | |
4548 | it and then expand the name string. */ | |
4549 | ||
4550 | if (gecos_pattern != NULL && gecos_name != NULL) | |
4551 | { | |
4552 | const pcre *re; | |
4553 | re = regex_must_compile(gecos_pattern, FALSE, TRUE); /* Use malloc */ | |
4554 | ||
4555 | if (regex_match_and_setup(re, name, 0, -1)) | |
4556 | { | |
4557 | uschar *new_name = expand_string(gecos_name); | |
4558 | expand_nmax = -1; | |
4559 | if (new_name != NULL) | |
4560 | { | |
4561 | DEBUG(D_receive) debug_printf("user name \"%s\" extracted from " | |
4562 | "gecos field \"%s\"\n", new_name, name); | |
4563 | name = new_name; | |
4564 | } | |
4565 | else DEBUG(D_receive) debug_printf("failed to expand gecos_name string " | |
4566 | "\"%s\": %s\n", gecos_name, expand_string_message); | |
4567 | } | |
4568 | else DEBUG(D_receive) debug_printf("gecos_pattern \"%s\" did not match " | |
4569 | "gecos field \"%s\"\n", gecos_pattern, name); | |
4570 | store_free((void *)re); | |
4571 | } | |
4572 | originator_name = string_copy(name); | |
4573 | } | |
4574 | ||
4575 | /* A trusted caller has used -f but not -F */ | |
4576 | ||
4577 | else originator_name = US""; | |
4578 | } | |
4579 | ||
4580 | /* Break the retry loop */ | |
4581 | ||
4582 | break; | |
4583 | } | |
4584 | ||
4585 | if (++i > finduser_retries) break; | |
4586 | sleep(1); | |
4587 | } | |
4588 | ||
4589 | /* If we cannot get a user login, log the incident and give up, unless the | |
4590 | configuration specifies something to use. When running in the test harness, | |
8800895a | 4591 | any setting of unknown_login overrides the actual name. */ |
059ec3d9 PH |
4592 | |
4593 | if (originator_login == NULL || running_in_test_harness) | |
4594 | { | |
4595 | if (unknown_login != NULL) | |
4596 | { | |
4597 | originator_login = expand_string(unknown_login); | |
4598 | if (originator_name == NULL && unknown_username != NULL) | |
4599 | originator_name = expand_string(unknown_username); | |
4600 | if (originator_name == NULL) originator_name = US""; | |
4601 | } | |
4602 | if (originator_login == NULL) | |
4603 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed to get user name for uid %d", | |
4604 | (int)real_uid); | |
4605 | } | |
4606 | ||
4607 | /* Ensure that the user name is in a suitable form for use as a "phrase" in an | |
4608 | RFC822 address.*/ | |
4609 | ||
4610 | originator_name = string_copy(parse_fix_phrase(originator_name, | |
4611 | Ustrlen(originator_name), big_buffer, big_buffer_size)); | |
4612 | ||
4613 | /* If a message is created by this call of Exim, the uid/gid of its originator | |
4614 | are those of the caller. These values are overridden if an existing message is | |
4615 | read in from the spool. */ | |
4616 | ||
4617 | originator_uid = real_uid; | |
4618 | originator_gid = real_gid; | |
4619 | ||
4620 | DEBUG(D_receive) debug_printf("originator: uid=%d gid=%d login=%s name=%s\n", | |
4621 | (int)originator_uid, (int)originator_gid, originator_login, originator_name); | |
4622 | ||
4623 | /* Run in daemon and/or queue-running mode. The function daemon_go() never | |
4624 | returns. We leave this till here so that the originator_ fields are available | |
47c7a64a PH |
4625 | for incoming messages via the daemon. The daemon cannot be run in mua_wrapper |
4626 | mode. */ | |
059ec3d9 | 4627 | |
9ee44efb | 4628 | if (daemon_listen || inetd_wait_mode || queue_interval > 0) |
059ec3d9 | 4629 | { |
47c7a64a PH |
4630 | if (mua_wrapper) |
4631 | { | |
4632 | fprintf(stderr, "Daemon cannot be run when mua_wrapper is set\n"); | |
4633 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Daemon cannot be run when " | |
4634 | "mua_wrapper is set"); | |
4635 | } | |
059ec3d9 PH |
4636 | daemon_go(); |
4637 | } | |
4638 | ||
4639 | /* If the sender ident has not been set (by a trusted caller) set it to | |
4640 | the caller. This will get overwritten below for an inetd call. If a trusted | |
4641 | caller has set it empty, unset it. */ | |
4642 | ||
4643 | if (sender_ident == NULL) sender_ident = originator_login; | |
4644 | else if (sender_ident[0] == 0) sender_ident = NULL; | |
4645 | ||
4646 | /* Handle the -brw option, which is for checking out rewriting rules. Cause log | |
4647 | writes (on errors) to go to stderr instead. Can't do this earlier, as want the | |
4648 | originator_* variables set. */ | |
4649 | ||
4650 | if (test_rewrite_arg >= 0) | |
4651 | { | |
4652 | really_exim = FALSE; | |
4653 | if (test_rewrite_arg >= argc) | |
4654 | { | |
4655 | printf("-brw needs an address argument\n"); | |
4656 | exim_exit(EXIT_FAILURE); | |
4657 | } | |
4658 | rewrite_test(argv[test_rewrite_arg]); | |
4659 | exim_exit(EXIT_SUCCESS); | |
4660 | } | |
4661 | ||
4662 | /* A locally-supplied message is considered to be coming from a local user | |
4663 | unless a trusted caller supplies a sender address with -f, or is passing in the | |
4664 | message via SMTP (inetd invocation or otherwise). */ | |
4665 | ||
4666 | if ((sender_address == NULL && !smtp_input) || | |
f05da2e8 | 4667 | (!trusted_caller && filter_test == FTEST_NONE)) |
059ec3d9 PH |
4668 | { |
4669 | sender_local = TRUE; | |
4670 | ||
4671 | /* A trusted caller can supply authenticated_sender and authenticated_id | |
33d73e3b PH |
4672 | via -oMas and -oMai and if so, they will already be set. Otherwise, force |
4673 | defaults except when host checking. */ | |
059ec3d9 | 4674 | |
33d73e3b | 4675 | if (authenticated_sender == NULL && !host_checking) |
059ec3d9 PH |
4676 | authenticated_sender = string_sprintf("%s@%s", originator_login, |
4677 | qualify_domain_sender); | |
33d73e3b PH |
4678 | if (authenticated_id == NULL && !host_checking) |
4679 | authenticated_id = originator_login; | |
059ec3d9 PH |
4680 | } |
4681 | ||
4682 | /* Trusted callers are always permitted to specify the sender address. | |
4683 | Untrusted callers may specify it if it matches untrusted_set_sender, or if what | |
4684 | is specified is the empty address. However, if a trusted caller does not | |
4685 | specify a sender address for SMTP input, we leave sender_address unset. This | |
4686 | causes the MAIL commands to be honoured. */ | |
4687 | ||
4688 | if ((!smtp_input && sender_address == NULL) || | |
4689 | !receive_check_set_sender(sender_address)) | |
4690 | { | |
4691 | /* Either the caller is not permitted to set a general sender, or this is | |
4692 | non-SMTP input and the trusted caller has not set a sender. If there is no | |
4693 | sender, or if a sender other than <> is set, override with the originator's | |
4694 | login (which will get qualified below), except when checking things. */ | |
4695 | ||
4696 | if (sender_address == NULL /* No sender_address set */ | |
4697 | || /* OR */ | |
4698 | (sender_address[0] != 0 && /* Non-empty sender address, AND */ | |
4699 | !checking && /* Not running tests, AND */ | |
f05da2e8 | 4700 | filter_test == FTEST_NONE)) /* Not testing a filter */ |
059ec3d9 PH |
4701 | { |
4702 | sender_address = originator_login; | |
4703 | sender_address_forced = FALSE; | |
4704 | sender_address_domain = 0; | |
4705 | } | |
4706 | } | |
4707 | ||
4708 | /* Remember whether an untrusted caller set the sender address */ | |
4709 | ||
4710 | sender_set_untrusted = sender_address != originator_login && !trusted_caller; | |
4711 | ||
4712 | /* Ensure that the sender address is fully qualified unless it is the empty | |
4713 | address, which indicates an error message, or doesn't exist (root caller, smtp | |
4714 | interface, no -f argument). */ | |
4715 | ||
4716 | if (sender_address != NULL && sender_address[0] != 0 && | |
4717 | sender_address_domain == 0) | |
4718 | sender_address = string_sprintf("%s@%s", local_part_quote(sender_address), | |
4719 | qualify_domain_sender); | |
4720 | ||
4721 | DEBUG(D_receive) debug_printf("sender address = %s\n", sender_address); | |
4722 | ||
4723 | /* Handle a request to verify a list of addresses, or test them for delivery. | |
4724 | This must follow the setting of the sender address, since routers can be | |
4725 | predicated upon the sender. If no arguments are given, read addresses from | |
4726 | stdin. Set debug_level to at least D_v to get full output for address testing. | |
4727 | */ | |
4728 | ||
4729 | if (verify_address_mode || address_test_mode) | |
4730 | { | |
4731 | int exit_value = 0; | |
4732 | int flags = vopt_qualify; | |
4733 | ||
4734 | if (verify_address_mode) | |
4735 | { | |
4736 | if (!verify_as_sender) flags |= vopt_is_recipient; | |
4737 | DEBUG(D_verify) debug_print_ids(US"Verifying:"); | |
4738 | } | |
4739 | ||
4740 | else | |
4741 | { | |
4742 | flags |= vopt_is_recipient; | |
4743 | debug_selector |= D_v; | |
4744 | debug_file = stderr; | |
4745 | debug_fd = fileno(debug_file); | |
4746 | DEBUG(D_verify) debug_print_ids(US"Address testing:"); | |
4747 | } | |
4748 | ||
4749 | if (recipients_arg < argc) | |
4750 | { | |
4751 | while (recipients_arg < argc) | |
4752 | { | |
4753 | uschar *s = argv[recipients_arg++]; | |
4754 | while (*s != 0) | |
4755 | { | |
4756 | BOOL finished = FALSE; | |
4757 | uschar *ss = parse_find_address_end(s, FALSE); | |
4758 | if (*ss == ',') *ss = 0; else finished = TRUE; | |
4759 | test_address(s, flags, &exit_value); | |
4760 | s = ss; | |
4761 | if (!finished) | |
4762 | while (*(++s) != 0 && (*s == ',' || isspace(*s))); | |
4763 | } | |
4764 | } | |
4765 | } | |
4766 | ||
4767 | else for (;;) | |
4768 | { | |
4769 | uschar *s = get_stdinput(NULL, NULL); | |
4770 | if (s == NULL) break; | |
4771 | test_address(s, flags, &exit_value); | |
4772 | } | |
4773 | ||
4774 | route_tidyup(); | |
4775 | exim_exit(exit_value); | |
4776 | } | |
4777 | ||
0ef732d9 PH |
4778 | /* Handle expansion checking. Either expand items on the command line, or read |
4779 | from stdin if there aren't any. If -Mset was specified, load the message so | |
328895cc PH |
4780 | that its variables can be used, but restrict this facility to admin users. |
4781 | Otherwise, if -bem was used, read a message from stdin. */ | |
059ec3d9 PH |
4782 | |
4783 | if (expansion_test) | |
4784 | { | |
0ef732d9 PH |
4785 | if (msg_action_arg > 0 && msg_action == MSG_LOAD) |
4786 | { | |
4787 | uschar spoolname[256]; /* Not big_buffer; used in spool_read_header() */ | |
4788 | if (!admin_user) | |
4789 | { | |
4790 | fprintf(stderr, "exim: permission denied\n"); | |
4791 | exit(EXIT_FAILURE); | |
4792 | } | |
4793 | message_id = argv[msg_action_arg]; | |
4794 | (void)string_format(spoolname, sizeof(spoolname), "%s-H", message_id); | |
4795 | if (!spool_open_datafile(message_id)) | |
4796 | printf ("Failed to load message datafile %s\n", message_id); | |
4797 | if (spool_read_header(spoolname, TRUE, FALSE) != spool_read_OK) | |
4798 | printf ("Failed to load message %s\n", message_id); | |
4799 | } | |
4800 | ||
328895cc PH |
4801 | /* Read a test message from a file. We fudge it up to be on stdin, saving |
4802 | stdin itself for later reading of expansion strings. */ | |
4803 | ||
4804 | else if (expansion_test_message != NULL) | |
4805 | { | |
4806 | int save_stdin = dup(0); | |
4807 | int fd = Uopen(expansion_test_message, O_RDONLY, 0); | |
4808 | if (fd < 0) | |
4809 | { | |
4810 | fprintf(stderr, "exim: failed to open %s: %s\n", expansion_test_message, | |
4811 | strerror(errno)); | |
4812 | return EXIT_FAILURE; | |
4813 | } | |
4814 | (void) dup2(fd, 0); | |
4815 | filter_test = FTEST_USER; /* Fudge to make it look like filter test */ | |
4816 | message_ended = END_NOTENDED; | |
4817 | read_message_body(receive_msg(extract_recipients)); | |
2d2b05f4 | 4818 | message_linecount += body_linecount; |
328895cc PH |
4819 | (void)dup2(save_stdin, 0); |
4820 | (void)close(save_stdin); | |
935ff400 | 4821 | clearerr(stdin); /* Required by Darwin */ |
328895cc PH |
4822 | } |
4823 | ||
4824 | /* Allow $recipients for this testing */ | |
4825 | ||
4826 | enable_dollar_recipients = TRUE; | |
4827 | ||
0ef732d9 PH |
4828 | /* Expand command line items */ |
4829 | ||
059ec3d9 PH |
4830 | if (recipients_arg < argc) |
4831 | { | |
4832 | while (recipients_arg < argc) | |
4833 | { | |
4834 | uschar *s = argv[recipients_arg++]; | |
4835 | uschar *ss = expand_string(s); | |
0ef732d9 | 4836 | if (ss == NULL) printf ("Failed: %s\n", expand_string_message); |
059ec3d9 PH |
4837 | else printf("%s\n", CS ss); |
4838 | } | |
4839 | } | |
4840 | ||
4841 | /* Read stdin */ | |
4842 | ||
4843 | else | |
4844 | { | |
1ba28e2b PP |
4845 | char *(*fn_readline)(const char *) = NULL; |
4846 | void (*fn_addhist)(const char *) = NULL; | |
059ec3d9 PH |
4847 | |
4848 | #ifdef USE_READLINE | |
4849 | void *dlhandle = set_readline(&fn_readline, &fn_addhist); | |
4850 | #endif | |
4851 | ||
4852 | for (;;) | |
4853 | { | |
4854 | uschar *ss; | |
4855 | uschar *source = get_stdinput(fn_readline, fn_addhist); | |
4856 | if (source == NULL) break; | |
4857 | ss = expand_string(source); | |
4858 | if (ss == NULL) | |
4859 | printf ("Failed: %s\n", expand_string_message); | |
4860 | else printf("%s\n", CS ss); | |
4861 | } | |
4862 | ||
4863 | #ifdef USE_READLINE | |
4864 | if (dlhandle != NULL) dlclose(dlhandle); | |
4865 | #endif | |
4866 | } | |
4867 | ||
0ef732d9 PH |
4868 | /* The data file will be open after -Mset */ |
4869 | ||
4870 | if (deliver_datafile >= 0) | |
4871 | { | |
4872 | (void)close(deliver_datafile); | |
4873 | deliver_datafile = -1; | |
4874 | } | |
4875 | ||
059ec3d9 PH |
4876 | exim_exit(EXIT_SUCCESS); |
4877 | } | |
4878 | ||
4879 | ||
4880 | /* The active host name is normally the primary host name, but it can be varied | |
4881 | for hosts that want to play several parts at once. We need to ensure that it is | |
4882 | set for host checking, and for receiving messages. */ | |
4883 | ||
4884 | smtp_active_hostname = primary_hostname; | |
4885 | if (raw_active_hostname != NULL) | |
4886 | { | |
4887 | uschar *nah = expand_string(raw_active_hostname); | |
4888 | if (nah == NULL) | |
4889 | { | |
4890 | if (!expand_string_forcedfail) | |
4891 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand \"%s\" " | |
4892 | "(smtp_active_hostname): %s", raw_active_hostname, | |
4893 | expand_string_message); | |
4894 | } | |
4895 | else if (nah[0] != 0) smtp_active_hostname = nah; | |
4896 | } | |
4897 | ||
4898 | /* Handle host checking: this facility mocks up an incoming SMTP call from a | |
33d73e3b PH |
4899 | given IP address so that the blocking and relay configuration can be tested. |
4900 | Unless a sender_ident was set by -oMt, we discard it (the default is the | |
4901 | caller's login name). An RFC 1413 call is made only if we are running in the | |
4902 | test harness and an incoming interface and both ports are specified, because | |
4903 | there is no TCP/IP call to find the ident for. */ | |
059ec3d9 PH |
4904 | |
4905 | if (host_checking) | |
4906 | { | |
8e669ac1 | 4907 | int x[4]; |
6f0c9a4f | 4908 | int size; |
8e669ac1 | 4909 | |
33d73e3b PH |
4910 | if (!sender_ident_set) |
4911 | { | |
4912 | sender_ident = NULL; | |
4913 | if (running_in_test_harness && sender_host_port != 0 && | |
4914 | interface_address != NULL && interface_port != 0) | |
4915 | verify_get_ident(1413); | |
4916 | } | |
8e669ac1 | 4917 | |
6f0c9a4f PH |
4918 | /* In case the given address is a non-canonical IPv6 address, canonicize |
4919 | it. The code works for both IPv4 and IPv6, as it happens. */ | |
8e669ac1 | 4920 | |
6f0c9a4f PH |
4921 | size = host_aton(sender_host_address, x); |
4922 | sender_host_address = store_get(48); /* large enough for full IPv6 */ | |
4923 | (void)host_nmtoa(size, x, -1, sender_host_address, ':'); | |
4924 | ||
4925 | /* Now set up for testing */ | |
059ec3d9 PH |
4926 | |
4927 | host_build_sender_fullhost(); | |
4928 | smtp_input = TRUE; | |
4929 | smtp_in = stdin; | |
4930 | smtp_out = stdout; | |
4931 | sender_local = FALSE; | |
4932 | sender_host_notsocket = TRUE; | |
4933 | debug_file = stderr; | |
4934 | debug_fd = fileno(debug_file); | |
4935 | fprintf(stdout, "\n**** SMTP testing session as if from host %s\n" | |
4936 | "**** but without any ident (RFC 1413) callback.\n" | |
4937 | "**** This is not for real!\n\n", | |
4938 | sender_host_address); | |
4939 | ||
4940 | if (verify_check_host(&hosts_connection_nolog) == OK) | |
4941 | log_write_selector &= ~L_smtp_connection; | |
4942 | log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info()); | |
4943 | ||
24796b8d PH |
4944 | /* NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails, |
4945 | because a log line has already been written for all its failure exists | |
4946 | (usually "connection refused: <reason>") and writing another one is | |
4947 | unnecessary clutter. */ | |
4948 | ||
059ec3d9 PH |
4949 | if (smtp_start_session()) |
4950 | { | |
4951 | reset_point = store_get(0); | |
4952 | for (;;) | |
4953 | { | |
4954 | store_reset(reset_point); | |
4955 | if (smtp_setup_msg() <= 0) break; | |
4956 | if (!receive_msg(FALSE)) break; | |
4957 | } | |
24796b8d | 4958 | smtp_log_no_mail(); |
059ec3d9 PH |
4959 | } |
4960 | exim_exit(EXIT_SUCCESS); | |
4961 | } | |
4962 | ||
4963 | ||
4964 | /* Arrange for message reception if recipients or SMTP were specified; | |
4965 | otherwise complain unless a version print (-bV) happened or this is a filter | |
98a90c36 PP |
4966 | verification test or info dump. |
4967 | In the former case, show the configuration file name. */ | |
059ec3d9 PH |
4968 | |
4969 | if (recipients_arg >= argc && !extract_recipients && !smtp_input) | |
4970 | { | |
4971 | if (version_printed) | |
4972 | { | |
4973 | printf("Configuration file is %s\n", config_main_filename); | |
4974 | return EXIT_SUCCESS; | |
4975 | } | |
81ea09ca | 4976 | |
98a90c36 PP |
4977 | if (info_flag != CMDINFO_NONE) |
4978 | { | |
4979 | show_exim_information(info_flag, info_stdout ? stdout : stderr); | |
4980 | return info_stdout ? EXIT_SUCCESS : EXIT_FAILURE; | |
4981 | } | |
4982 | ||
f05da2e8 | 4983 | if (filter_test == FTEST_NONE) |
81ea09ca | 4984 | exim_usage(called_as); |
059ec3d9 PH |
4985 | } |
4986 | ||
4987 | ||
4988 | /* If mua_wrapper is set, Exim is being used to turn an MUA that submits on the | |
4989 | standard input into an MUA that submits to a smarthost over TCP/IP. We know | |
4990 | that we are not called from inetd, because that is rejected above. The | |
4991 | following configuration settings are forced here: | |
4992 | ||
4993 | (1) Synchronous delivery (-odi) | |
4994 | (2) Errors to stderr (-oep == -oeq) | |
4995 | (3) No parallel remote delivery | |
4996 | (4) Unprivileged delivery | |
4997 | ||
4998 | We don't force overall queueing options because there are several of them; | |
4999 | instead, queueing is avoided below when mua_wrapper is set. However, we do need | |
5000 | to override any SMTP queueing. */ | |
5001 | ||
5002 | if (mua_wrapper) | |
5003 | { | |
5004 | synchronous_delivery = TRUE; | |
5005 | arg_error_handling = ERRORS_STDERR; | |
5006 | remote_max_parallel = 1; | |
5007 | deliver_drop_privilege = TRUE; | |
5008 | queue_smtp = FALSE; | |
5009 | queue_smtp_domains = NULL; | |
5010 | } | |
5011 | ||
5012 | ||
5013 | /* Prepare to accept one or more new messages on the standard input. When a | |
5014 | message has been read, its id is returned in message_id[]. If doing immediate | |
5015 | delivery, we fork a delivery process for each received message, except for the | |
5016 | last one, where we can save a process switch. | |
5017 | ||
5018 | It is only in non-smtp mode that error_handling is allowed to be changed from | |
5019 | its default of ERRORS_SENDER by argument. (Idle thought: are any of the | |
5020 | sendmail error modes other than -oem ever actually used? Later: yes.) */ | |
5021 | ||
5022 | if (!smtp_input) error_handling = arg_error_handling; | |
5023 | ||
5024 | /* If this is an inetd call, ensure that stderr is closed to prevent panic | |
5025 | logging being sent down the socket and make an identd call to get the | |
5026 | sender_ident. */ | |
5027 | ||
5028 | else if (is_inetd) | |
5029 | { | |
1fe64dcc | 5030 | (void)fclose(stderr); |
059ec3d9 PH |
5031 | exim_nullstd(); /* Re-open to /dev/null */ |
5032 | verify_get_ident(IDENT_PORT); | |
5033 | host_build_sender_fullhost(); | |
5034 | set_process_info("handling incoming connection from %s via inetd", | |
5035 | sender_fullhost); | |
5036 | } | |
5037 | ||
5038 | /* If the sender host address has been set, build sender_fullhost if it hasn't | |
5039 | already been done (which it will have been for inetd). This caters for the | |
5040 | case when it is forced by -oMa. However, we must flag that it isn't a socket, | |
5041 | so that the test for IP options is skipped for -bs input. */ | |
5042 | ||
5043 | if (sender_host_address != NULL && sender_fullhost == NULL) | |
5044 | { | |
5045 | host_build_sender_fullhost(); | |
5046 | set_process_info("handling incoming connection from %s via -oMa", | |
5047 | sender_fullhost); | |
5048 | sender_host_notsocket = TRUE; | |
5049 | } | |
5050 | ||
5051 | /* Otherwise, set the sender host as unknown except for inetd calls. This | |
5052 | prevents host checking in the case of -bs not from inetd and also for -bS. */ | |
5053 | ||
5054 | else if (!is_inetd) sender_host_unknown = TRUE; | |
5055 | ||
5056 | /* If stdout does not exist, then dup stdin to stdout. This can happen | |
5057 | if exim is started from inetd. In this case fd 0 will be set to the socket, | |
5058 | but fd 1 will not be set. This also happens for passed SMTP channels. */ | |
5059 | ||
1fe64dcc | 5060 | if (fstat(1, &statbuf) < 0) (void)dup2(0, 1); |
059ec3d9 | 5061 | |
273f34d0 PH |
5062 | /* Set up the incoming protocol name and the state of the program. Root is |
5063 | allowed to force received protocol via the -oMr option above. If we have come | |
5064 | via inetd, the process info has already been set up. We don't set | |
5065 | received_protocol here for smtp input, as it varies according to | |
5066 | batch/HELO/EHLO/AUTH/TLS. */ | |
059ec3d9 PH |
5067 | |
5068 | if (smtp_input) | |
5069 | { | |
273f34d0 PH |
5070 | if (!is_inetd) set_process_info("accepting a local %sSMTP message from <%s>", |
5071 | smtp_batched_input? "batched " : "", | |
5072 | (sender_address!= NULL)? sender_address : originator_login); | |
059ec3d9 PH |
5073 | } |
5074 | else | |
5075 | { | |
5076 | if (received_protocol == NULL) | |
5077 | received_protocol = string_sprintf("local%s", called_as); | |
5078 | set_process_info("accepting a local non-SMTP message from <%s>", | |
5079 | sender_address); | |
5080 | } | |
5081 | ||
8669f003 PH |
5082 | /* Initialize the session_local_queue-only flag (this will be ignored if |
5083 | mua_wrapper is set) */ | |
059ec3d9 PH |
5084 | |
5085 | queue_check_only(); | |
8669f003 | 5086 | session_local_queue_only = queue_only; |
059ec3d9 PH |
5087 | |
5088 | /* For non-SMTP and for batched SMTP input, check that there is enough space on | |
5089 | the spool if so configured. On failure, we must not attempt to send an error | |
5090 | message! (For interactive SMTP, the check happens at MAIL FROM and an SMTP | |
5091 | error code is given.) */ | |
5092 | ||
5093 | if ((!smtp_input || smtp_batched_input) && !receive_check_fs(0)) | |
5094 | { | |
5095 | fprintf(stderr, "exim: insufficient disk space\n"); | |
5096 | return EXIT_FAILURE; | |
5097 | } | |
5098 | ||
273f34d0 PH |
5099 | /* If this is smtp input of any kind, real or batched, handle the start of the |
5100 | SMTP session. | |
24796b8d PH |
5101 | |
5102 | NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails, | |
5103 | because a log line has already been written for all its failure exists | |
5104 | (usually "connection refused: <reason>") and writing another one is | |
5105 | unnecessary clutter. */ | |
059ec3d9 PH |
5106 | |
5107 | if (smtp_input) | |
5108 | { | |
5109 | smtp_in = stdin; | |
5110 | smtp_out = stdout; | |
5111 | if (verify_check_host(&hosts_connection_nolog) == OK) | |
5112 | log_write_selector &= ~L_smtp_connection; | |
5113 | log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info()); | |
5114 | if (!smtp_start_session()) | |
5115 | { | |
5116 | mac_smtp_fflush(); | |
5117 | exim_exit(EXIT_SUCCESS); | |
5118 | } | |
5119 | } | |
5120 | ||
45b91596 | 5121 | /* Otherwise, set up the input size limit here. */ |
059ec3d9 PH |
5122 | |
5123 | else | |
5124 | { | |
d45b1de8 PH |
5125 | thismessage_size_limit = expand_string_integer(message_size_limit, TRUE); |
5126 | if (expand_string_message != NULL) | |
059ec3d9 PH |
5127 | { |
5128 | if (thismessage_size_limit == -1) | |
5129 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand " | |
5130 | "message_size_limit: %s", expand_string_message); | |
5131 | else | |
5132 | log_write(0, LOG_MAIN|LOG_PANIC_DIE, "invalid value for " | |
5133 | "message_size_limit: %s", expand_string_message); | |
5134 | } | |
5135 | } | |
5136 | ||
5137 | /* Loop for several messages when reading SMTP input. If we fork any child | |
5138 | processes, we don't want to wait for them unless synchronous delivery is | |
5139 | requested, so set SIGCHLD to SIG_IGN in that case. This is not necessarily the | |
5140 | same as SIG_DFL, despite the fact that documentation often lists the default as | |
5141 | "ignore". This is a confusing area. This is what I know: | |
5142 | ||
5143 | At least on some systems (e.g. Solaris), just setting SIG_IGN causes child | |
5144 | processes that complete simply to go away without ever becoming defunct. You | |
5145 | can't then wait for them - but we don't want to wait for them in the | |
5146 | non-synchronous delivery case. However, this behaviour of SIG_IGN doesn't | |
5147 | happen for all OS (e.g. *BSD is different). | |
5148 | ||
5149 | But that's not the end of the story. Some (many? all?) systems have the | |
5150 | SA_NOCLDWAIT option for sigaction(). This requests the behaviour that Solaris | |
5151 | has by default, so it seems that the difference is merely one of default | |
5152 | (compare restarting vs non-restarting signals). | |
5153 | ||
5154 | To cover all cases, Exim sets SIG_IGN with SA_NOCLDWAIT here if it can. If not, | |
5155 | it just sets SIG_IGN. To be on the safe side it also calls waitpid() at the end | |
5156 | of the loop below. Paranoia rules. | |
5157 | ||
5158 | February 2003: That's *still* not the end of the story. There are now versions | |
5159 | of Linux (where SIG_IGN does work) that are picky. If, having set SIG_IGN, a | |
5160 | process then calls waitpid(), a grumble is written to the system log, because | |
5161 | this is logically inconsistent. In other words, it doesn't like the paranoia. | |
5162 | As a consequenc of this, the waitpid() below is now excluded if we are sure | |
5163 | that SIG_IGN works. */ | |
5164 | ||
5165 | if (!synchronous_delivery) | |
5166 | { | |
5167 | #ifdef SA_NOCLDWAIT | |
5168 | struct sigaction act; | |
5169 | act.sa_handler = SIG_IGN; | |
5170 | sigemptyset(&(act.sa_mask)); | |
5171 | act.sa_flags = SA_NOCLDWAIT; | |
5172 | sigaction(SIGCHLD, &act, NULL); | |
5173 | #else | |
5174 | signal(SIGCHLD, SIG_IGN); | |
5175 | #endif | |
5176 | } | |
5177 | ||
5178 | /* Save the current store pool point, for resetting at the start of | |
5179 | each message, and save the real sender address, if any. */ | |
5180 | ||
5181 | reset_point = store_get(0); | |
5182 | real_sender_address = sender_address; | |
5183 | ||
5184 | /* Loop to receive messages; receive_msg() returns TRUE if there are more | |
5185 | messages to be read (SMTP input), or FALSE otherwise (not SMTP, or SMTP channel | |
5186 | collapsed). */ | |
5187 | ||
5188 | while (more) | |
5189 | { | |
5190 | store_reset(reset_point); | |
5191 | message_id[0] = 0; | |
5192 | ||
273f34d0 PH |
5193 | /* Handle the SMTP case; call smtp_setup_mst() to deal with the initial SMTP |
5194 | input and build the recipients list, before calling receive_msg() to read the | |
5195 | message proper. Whatever sender address is given in the SMTP transaction is | |
5196 | often ignored for local senders - we use the actual sender, which is normally | |
5197 | either the underlying user running this process or a -f argument provided by | |
5198 | a trusted caller. It is saved in real_sender_address. The test for whether to | |
5199 | accept the SMTP sender is encapsulated in receive_check_set_sender(). */ | |
059ec3d9 PH |
5200 | |
5201 | if (smtp_input) | |
5202 | { | |
5203 | int rc; | |
5204 | if ((rc = smtp_setup_msg()) > 0) | |
5205 | { | |
5206 | if (real_sender_address != NULL && | |
5207 | !receive_check_set_sender(sender_address)) | |
5208 | { | |
5209 | sender_address = raw_sender = real_sender_address; | |
5210 | sender_address_unrewritten = NULL; | |
5211 | } | |
273f34d0 PH |
5212 | |
5213 | /* For batched SMTP, we have to run the acl_not_smtp_start ACL, since it | |
5214 | isn't really SMTP, so no other ACL will run until the acl_not_smtp one at | |
5215 | the very end. The result of the ACL is ignored (as for other non-SMTP | |
5216 | messages). It is run for its potential side effects. */ | |
5217 | ||
5218 | if (smtp_batched_input && acl_not_smtp_start != NULL) | |
5219 | { | |
5220 | uschar *user_msg, *log_msg; | |
5221 | enable_dollar_recipients = TRUE; | |
5222 | (void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start, | |
5223 | &user_msg, &log_msg); | |
5224 | enable_dollar_recipients = FALSE; | |
5225 | } | |
5226 | ||
5227 | /* Now get the data for the message */ | |
5228 | ||
059ec3d9 PH |
5229 | more = receive_msg(extract_recipients); |
5230 | if (message_id[0] == 0) | |
5231 | { | |
5232 | if (more) continue; | |
b4ed4da0 | 5233 | smtp_log_no_mail(); /* Log no mail if configured */ |
059ec3d9 PH |
5234 | exim_exit(EXIT_FAILURE); |
5235 | } | |
5236 | } | |
b4ed4da0 PH |
5237 | else |
5238 | { | |
5239 | smtp_log_no_mail(); /* Log no mail if configured */ | |
5240 | exim_exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE); | |
5241 | } | |
059ec3d9 PH |
5242 | } |
5243 | ||
5244 | /* In the non-SMTP case, we have all the information from the command | |
5245 | line, but must process it in case it is in the more general RFC822 | |
5246 | format, and in any case, to detect syntax errors. Also, it appears that | |
5247 | the use of comma-separated lists as single arguments is common, so we | |
5248 | had better support them. */ | |
5249 | ||
5250 | else | |
5251 | { | |
5252 | int i; | |
5253 | int rcount = 0; | |
5254 | int count = argc - recipients_arg; | |
5255 | uschar **list = argv + recipients_arg; | |
eb2c0248 | 5256 | |
69358f02 | 5257 | /* These options cannot be changed dynamically for non-SMTP messages */ |
eb2c0248 | 5258 | |
69358f02 | 5259 | active_local_sender_retain = local_sender_retain; |
eb2c0248 | 5260 | active_local_from_check = local_from_check; |
059ec3d9 PH |
5261 | |
5262 | /* Save before any rewriting */ | |
5263 | ||
5264 | raw_sender = string_copy(sender_address); | |
5265 | ||
5266 | /* Loop for each argument */ | |
5267 | ||
5268 | for (i = 0; i < count; i++) | |
5269 | { | |
5270 | int start, end, domain; | |
5271 | uschar *errmess; | |
5272 | uschar *s = list[i]; | |
5273 | ||
5274 | /* Loop for each comma-separated address */ | |
5275 | ||
5276 | while (*s != 0) | |
5277 | { | |
5278 | BOOL finished = FALSE; | |
5279 | uschar *recipient; | |
5280 | uschar *ss = parse_find_address_end(s, FALSE); | |
5281 | ||
5282 | if (*ss == ',') *ss = 0; else finished = TRUE; | |
5283 | ||
5284 | /* Check max recipients - if -t was used, these aren't recipients */ | |
5285 | ||
5286 | if (recipients_max > 0 && ++rcount > recipients_max && | |
5287 | !extract_recipients) | |
5288 | { | |
5289 | if (error_handling == ERRORS_STDERR) | |
5290 | { | |
5291 | fprintf(stderr, "exim: too many recipients\n"); | |
5292 | exim_exit(EXIT_FAILURE); | |
5293 | } | |
5294 | else | |
5295 | { | |
5296 | return | |
5297 | moan_to_sender(ERRMESS_TOOMANYRECIP, NULL, NULL, stdin, TRUE)? | |
5298 | errors_sender_rc : EXIT_FAILURE; | |
5299 | } | |
5300 | } | |
5301 | ||
5302 | recipient = | |
5303 | parse_extract_address(s, &errmess, &start, &end, &domain, FALSE); | |
5304 | ||
5305 | if (domain == 0 && !allow_unqualified_recipient) | |
5306 | { | |
5307 | recipient = NULL; | |
5308 | errmess = US"unqualified recipient address not allowed"; | |
5309 | } | |
5310 | ||
5311 | if (recipient == NULL) | |
5312 | { | |
5313 | if (error_handling == ERRORS_STDERR) | |
5314 | { | |
5315 | fprintf(stderr, "exim: bad recipient address \"%s\": %s\n", | |
5316 | string_printing(list[i]), errmess); | |
5317 | exim_exit(EXIT_FAILURE); | |
5318 | } | |
5319 | else | |
5320 | { | |
5321 | error_block eblock; | |
5322 | eblock.next = NULL; | |
5323 | eblock.text1 = string_printing(list[i]); | |
5324 | eblock.text2 = errmess; | |
5325 | return | |
5326 | moan_to_sender(ERRMESS_BADARGADDRESS, &eblock, NULL, stdin, TRUE)? | |
5327 | errors_sender_rc : EXIT_FAILURE; | |
5328 | } | |
5329 | } | |
5330 | ||
5331 | receive_add_recipient(recipient, -1); | |
5332 | s = ss; | |
5333 | if (!finished) | |
5334 | while (*(++s) != 0 && (*s == ',' || isspace(*s))); | |
5335 | } | |
5336 | } | |
5337 | ||
5338 | /* Show the recipients when debugging */ | |
5339 | ||
5340 | DEBUG(D_receive) | |
5341 | { | |
5342 | int i; | |
5343 | if (sender_address != NULL) debug_printf("Sender: %s\n", sender_address); | |
5344 | if (recipients_list != NULL) | |
5345 | { | |
5346 | debug_printf("Recipients:\n"); | |
5347 | for (i = 0; i < recipients_count; i++) | |
5348 | debug_printf(" %s\n", recipients_list[i].address); | |
5349 | } | |
5350 | } | |
5351 | ||
45b91596 PH |
5352 | /* Run the acl_not_smtp_start ACL if required. The result of the ACL is |
5353 | ignored; rejecting here would just add complication, and it can just as | |
5354 | well be done later. Allow $recipients to be visible in the ACL. */ | |
5355 | ||
5356 | if (acl_not_smtp_start != NULL) | |
5357 | { | |
5358 | uschar *user_msg, *log_msg; | |
5359 | enable_dollar_recipients = TRUE; | |
5360 | (void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start, | |
5361 | &user_msg, &log_msg); | |
5362 | enable_dollar_recipients = FALSE; | |
5363 | } | |
5364 | ||
f05da2e8 PH |
5365 | /* Read the data for the message. If filter_test is not FTEST_NONE, this |
5366 | will just read the headers for the message, and not write anything onto the | |
5367 | spool. */ | |
059ec3d9 PH |
5368 | |
5369 | message_ended = END_NOTENDED; | |
5370 | more = receive_msg(extract_recipients); | |
5371 | ||
5372 | /* more is always FALSE here (not SMTP message) when reading a message | |
5373 | for real; when reading the headers of a message for filter testing, | |
5374 | it is TRUE if the headers were terminated by '.' and FALSE otherwise. */ | |
5375 | ||
5376 | if (message_id[0] == 0) exim_exit(EXIT_FAILURE); | |
5377 | } /* Non-SMTP message reception */ | |
5378 | ||
5379 | /* If this is a filter testing run, there are headers in store, but | |
5380 | no message on the spool. Run the filtering code in testing mode, setting | |
5381 | the domain to the qualify domain and the local part to the current user, | |
5382 | unless they have been set by options. The prefix and suffix are left unset | |
5383 | unless specified. The the return path is set to to the sender unless it has | |
5384 | already been set from a return-path header in the message. */ | |
5385 | ||
f05da2e8 | 5386 | if (filter_test != FTEST_NONE) |
059ec3d9 PH |
5387 | { |
5388 | deliver_domain = (ftest_domain != NULL)? | |
5389 | ftest_domain : qualify_domain_recipient; | |
5390 | deliver_domain_orig = deliver_domain; | |
5391 | deliver_localpart = (ftest_localpart != NULL)? | |
5392 | ftest_localpart : originator_login; | |
5393 | deliver_localpart_orig = deliver_localpart; | |
5394 | deliver_localpart_prefix = ftest_prefix; | |
5395 | deliver_localpart_suffix = ftest_suffix; | |
5396 | deliver_home = originator_home; | |
5397 | ||
5398 | if (return_path == NULL) | |
5399 | { | |
5400 | printf("Return-path copied from sender\n"); | |
5401 | return_path = string_copy(sender_address); | |
5402 | } | |
5403 | else | |
5404 | { | |
5405 | printf("Return-path = %s\n", (return_path[0] == 0)? US"<>" : return_path); | |
5406 | } | |
5407 | printf("Sender = %s\n", (sender_address[0] == 0)? US"<>" : sender_address); | |
5408 | ||
5409 | receive_add_recipient( | |
5410 | string_sprintf("%s%s%s@%s", | |
5411 | (ftest_prefix == NULL)? US"" : ftest_prefix, | |
5412 | deliver_localpart, | |
5413 | (ftest_suffix == NULL)? US"" : ftest_suffix, | |
5414 | deliver_domain), -1); | |
5415 | ||
5416 | printf("Recipient = %s\n", recipients_list[0].address); | |
5417 | if (ftest_prefix != NULL) printf("Prefix = %s\n", ftest_prefix); | |
5418 | if (ftest_suffix != NULL) printf("Suffix = %s\n", ftest_suffix); | |
5419 | ||
1ac6b2e7 JH |
5420 | if (chdir("/")) /* Get away from wherever the user is running this from */ |
5421 | { | |
5422 | DEBUG(D_receive) debug_printf("chdir(\"/\") failed\n"); | |
5423 | exim_exit(EXIT_FAILURE); | |
5424 | } | |
8e669ac1 PH |
5425 | |
5426 | /* Now we run either a system filter test, or a user filter test, or both. | |
5427 | In the latter case, headers added by the system filter will persist and be | |
5428 | available to the user filter. We need to copy the filter variables | |
f05da2e8 | 5429 | explicitly. */ |
8e669ac1 | 5430 | |
f05da2e8 PH |
5431 | if ((filter_test & FTEST_SYSTEM) != 0) |
5432 | { | |
5433 | if (!filter_runtest(filter_sfd, filter_test_sfile, TRUE, more)) | |
5434 | exim_exit(EXIT_FAILURE); | |
8e669ac1 PH |
5435 | } |
5436 | ||
f05da2e8 | 5437 | memcpy(filter_sn, filter_n, sizeof(filter_sn)); |
8e669ac1 | 5438 | |
f05da2e8 PH |
5439 | if ((filter_test & FTEST_USER) != 0) |
5440 | { | |
5441 | if (!filter_runtest(filter_ufd, filter_test_ufile, FALSE, more)) | |
5442 | exim_exit(EXIT_FAILURE); | |
8e669ac1 PH |
5443 | } |
5444 | ||
f05da2e8 | 5445 | exim_exit(EXIT_SUCCESS); |
059ec3d9 PH |
5446 | } |
5447 | ||
5448 | /* Else act on the result of message reception. We should not get here unless | |
8669f003 PH |
5449 | message_id[0] is non-zero. If queue_only is set, session_local_queue_only |
5450 | will be TRUE. If it is not, check on the number of messages received in this | |
5451 | connection. */ | |
5452 | ||
5453 | if (!session_local_queue_only && | |
5454 | smtp_accept_queue_per_connection > 0 && | |
5455 | receive_messagecount > smtp_accept_queue_per_connection) | |
059ec3d9 | 5456 | { |
8669f003 PH |
5457 | session_local_queue_only = TRUE; |
5458 | queue_only_reason = 2; | |
5459 | } | |
5460 | ||
5461 | /* Initialize local_queue_only from session_local_queue_only. If it is false, | |
5462 | and queue_only_load is set, check that the load average is below it. If it is | |
5463 | not, set local_queue_only TRUE. If queue_only_load_latch is true (the | |
5464 | default), we put the whole session into queue_only mode. It then remains this | |
5465 | way for any subsequent messages on the same SMTP connection. This is a | |
5466 | deliberate choice; even though the load average may fall, it doesn't seem | |
5467 | right to deliver later messages on the same call when not delivering earlier | |
5468 | ones. However, there are odd cases where this is not wanted, so this can be | |
5469 | changed by setting queue_only_load_latch false. */ | |
5470 | ||
5471 | local_queue_only = session_local_queue_only; | |
5472 | if (!local_queue_only && queue_only_load >= 0) | |
5473 | { | |
5474 | local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load; | |
5475 | if (local_queue_only) | |
059ec3d9 | 5476 | { |
8669f003 PH |
5477 | queue_only_reason = 3; |
5478 | if (queue_only_load_latch) session_local_queue_only = TRUE; | |
059ec3d9 PH |
5479 | } |
5480 | } | |
5481 | ||
5482 | /* If running as an MUA wrapper, all queueing options and freezing options | |
5483 | are ignored. */ | |
5484 | ||
5485 | if (mua_wrapper) | |
5486 | local_queue_only = queue_only_policy = deliver_freeze = FALSE; | |
5487 | ||
5488 | /* Log the queueing here, when it will get a message id attached, but | |
5489 | not if queue_only is set (case 0). Case 1 doesn't happen here (too many | |
5490 | connections). */ | |
5491 | ||
5492 | if (local_queue_only) switch(queue_only_reason) | |
5493 | { | |
5494 | case 2: | |
5495 | log_write(L_delay_delivery, | |
5496 | LOG_MAIN, "no immediate delivery: more than %d messages " | |
5497 | "received in one connection", smtp_accept_queue_per_connection); | |
5498 | break; | |
5499 | ||
5500 | case 3: | |
5501 | log_write(L_delay_delivery, | |
5502 | LOG_MAIN, "no immediate delivery: load average %.2f", | |
5503 | (double)load_average/1000.0); | |
5504 | break; | |
5505 | } | |
5506 | ||
5507 | /* Else do the delivery unless the ACL or local_scan() called for queue only | |
5508 | or froze the message. Always deliver in a separate process. A fork failure is | |
5509 | not a disaster, as the delivery will eventually happen on a subsequent queue | |
eb2c0248 PH |
5510 | run. The search cache must be tidied before the fork, as the parent will |
5511 | do it before exiting. The child will trigger a lookup failure and | |
5512 | thereby defer the delivery if it tries to use (for example) a cached ldap | |
5513 | connection that the parent has called unbind on. */ | |
059ec3d9 PH |
5514 | |
5515 | else if (!queue_only_policy && !deliver_freeze) | |
5516 | { | |
5517 | pid_t pid; | |
eb2c0248 PH |
5518 | search_tidyup(); |
5519 | ||
059ec3d9 PH |
5520 | if ((pid = fork()) == 0) |
5521 | { | |
5522 | int rc; | |
5523 | close_unwanted(); /* Close unwanted file descriptors and TLS */ | |
5524 | exim_nullstd(); /* Ensure std{in,out,err} exist */ | |
5525 | ||
5526 | /* Re-exec Exim if we need to regain privilege (note: in mua_wrapper | |
5527 | mode, deliver_drop_privilege is forced TRUE). */ | |
5528 | ||
5529 | if (geteuid() != root_uid && !deliver_drop_privilege && !unprivileged) | |
5530 | { | |
5531 | (void)child_exec_exim(CEE_EXEC_EXIT, FALSE, NULL, FALSE, 2, US"-Mc", | |
5532 | message_id); | |
5533 | /* Control does not return here. */ | |
5534 | } | |
5535 | ||
5536 | /* No need to re-exec */ | |
5537 | ||
5538 | rc = deliver_message(message_id, FALSE, FALSE); | |
5539 | search_tidyup(); | |
5540 | _exit((!mua_wrapper || rc == DELIVER_MUA_SUCCEEDED)? | |
5541 | EXIT_SUCCESS : EXIT_FAILURE); | |
5542 | } | |
5543 | ||
5544 | if (pid < 0) | |
5545 | { | |
5546 | log_write(0, LOG_MAIN|LOG_PANIC, "failed to fork automatic delivery " | |
5547 | "process: %s", strerror(errno)); | |
5548 | } | |
5549 | ||
5550 | /* In the parent, wait if synchronous delivery is required. This will | |
5551 | always be the case in MUA wrapper mode. */ | |
5552 | ||
5553 | else if (synchronous_delivery) | |
5554 | { | |
5555 | int status; | |
5556 | while (wait(&status) != pid); | |
5557 | if ((status & 0x00ff) != 0) | |
5558 | log_write(0, LOG_MAIN|LOG_PANIC, | |
5559 | "process %d crashed with signal %d while delivering %s", | |
5560 | (int)pid, status & 0x00ff, message_id); | |
5561 | if (mua_wrapper && (status & 0xffff) != 0) exim_exit(EXIT_FAILURE); | |
5562 | } | |
5563 | } | |
5564 | ||
5565 | /* The loop will repeat if more is TRUE. If we do not know know that the OS | |
5566 | automatically reaps children (see comments above the loop), clear away any | |
5567 | finished subprocesses here, in case there are lots of messages coming in | |
5568 | from the same source. */ | |
5569 | ||
5570 | #ifndef SIG_IGN_WORKS | |
5571 | while (waitpid(-1, NULL, WNOHANG) > 0); | |
5572 | #endif | |
5573 | } | |
5574 | ||
5575 | exim_exit(EXIT_SUCCESS); /* Never returns */ | |
5576 | return 0; /* To stop compiler warning */ | |
5577 | } | |
5578 | ||
5579 | /* End of exim.c */ |