Commit | Line | Data |
---|---|---|
926e1192 | 1 | # $Cambridge: exim/src/src/EDITME,v 1.4 2004/11/05 12:33:59 ph10 Exp $ |
059ec3d9 PH |
2 | |
3 | ################################################## | |
4 | # The Exim mail transport agent # | |
5 | ################################################## | |
6 | ||
7 | # This is the template for Exim's main build-time configuration file. It | |
8 | # contains settings that are independent of any operating system. These are | |
9 | # things that are mostly sysadmin choices. The items below are divided into | |
10 | # those you must specify, those you probably want to specify, those you might | |
11 | # often want to specify, and those that you almost never need to mention. | |
12 | ||
13 | # Edit this file and save the result to a file called Local/Makefile within the | |
14 | # Exim distribution directory before running the "make" command. | |
15 | ||
16 | # Things that depend on the operating system have default settings in | |
17 | # OS/Makefile-Default, but these are overridden for some OS by files called | |
18 | # called OS/Makefile-<osname>. You can further override these by creating files | |
19 | # called Local/Makefile-<osname>, where "<osname>" stands for the name of your | |
20 | # operating system - look at the names in the OS directory to see which names | |
21 | # are recognized. | |
22 | ||
23 | # However, if you are building Exim for a single OS only, you don't need to | |
24 | # worry about setting up Local/Makefile-<osname>. Any build-time configuration | |
25 | # settings you require can in fact be placed in the one file called | |
26 | # Local/Makefile. It is only if you are building for several OS from the same | |
27 | # source files that you need to worry about splitting off your own OS-dependent | |
28 | # settings into separate files. (There's more explanation about how this all | |
29 | # works in the toplevel README file, under "Modifying the building process", as | |
30 | # well as in the Exim specification.) | |
31 | ||
32 | # One OS-specific thing that may need to be changed is the command for running | |
33 | # the C compiler; the overall default is gcc, but some OS Makefiles specify cc. | |
34 | # You can override anything that is set by putting CC=whatever in your | |
35 | # Local/Makefile. | |
36 | ||
37 | # NOTE: You should never need to edit any of the distributed Makefiles; all | |
38 | # overriding can be done in your Local/Makefile(s). This will make it easier | |
39 | # for you when the next release comes along. | |
40 | ||
41 | # The location of the X11 libraries is something else that is quite variable | |
42 | # even between different versions of the same operating system (and indeed | |
43 | # there are different versions of X11 as well, of course). The four settings | |
44 | # concerned here are X11, XINCLUDE, XLFLAGS (linking flags) and X11_LD_LIB | |
45 | # (dynamic run-time library). You need not worry about X11 unless you want to | |
46 | # compile the Exim monitor utility. Exim itself does not use X11. | |
47 | ||
48 | # Another area of variability between systems is the type and location of the | |
49 | # DBM library package. Exim has support for ndbm, gdbm, tdb, and Berkeley DB. | |
50 | # By default the code assumes ndbm; this often works with gdbm or DB, provided | |
51 | # they are correctly installed, via their compatibility interfaces. However, | |
52 | # Exim can also be configured to use the native calls for Berkeley DB (obsolete | |
53 | # versions 1.85, 2.x, 3.x, or the current 4.x version) and also for gdbm. | |
54 | ||
55 | # For some operating systems, a default DBM library (other than ndbm) is | |
56 | # selected by a setting in the OS-specific Makefile. Most modern OS now have | |
57 | # a DBM library installed as standard, and in many cases this will be selected | |
58 | # for you by the OS-specific configuration. If Exim compiles without any | |
59 | # problems, you probably do not have to worry about the DBM library. If you | |
60 | # do want or need to change it, you should first read the discussion in the | |
61 | # file doc/dbm.discuss.txt, which also contains instructions for testing Exim's | |
62 | # interface to the DBM library. | |
63 | ||
64 | # In Local/Makefiles blank lines and lines starting with # are ignored. It is | |
65 | # also permitted to use the # character to add a comment to a setting, for | |
66 | # example | |
67 | # | |
68 | # EXIM_GID=42 # the "mail" group | |
69 | # | |
70 | # However, with some versions of "make" this works only if there is no white | |
71 | # space between the end of the setting and the #, so perhaps it is best | |
72 | # avoided. A consequence of this facility is that it is not possible to have | |
73 | # the # character present in any setting, but I can't think of any cases where | |
74 | # this would be wanted. | |
75 | ############################################################################### | |
76 | ||
77 | ||
78 | ||
79 | ############################################################################### | |
80 | # THESE ARE THINGS YOU MUST SPECIFY # | |
81 | ############################################################################### | |
82 | ||
83 | # Exim will not build unless you specify BIN_DIRECTORY, CONFIGURE_FILE, and | |
84 | # EXIM_USER. You also need EXIM_GROUP if EXIM_USER specifies a uid by number. | |
85 | ||
86 | # If you don't specify SPOOL_DIRECTORY, Exim won't fail to build. However, it | |
87 | # really is a very good idea to specify it here rather than at run time. This | |
88 | # is particularly true if you let the logs go to their default location in the | |
89 | # spool directory, because it means that the location of the logs is known | |
90 | # before Exim has read the run time configuration file. | |
91 | ||
92 | #------------------------------------------------------------------------------ | |
93 | # BIN_DIRECTORY defines where the exim binary will be installed by "make | |
94 | # install". The path is also used internally by Exim when it needs to re-invoke | |
95 | # itself, either to send an error message, or to recover root privilege. Exim's | |
96 | # utility binaries and scripts are also installed in this directory. There is | |
97 | # no "standard" place for the binary directory. Some people like to keep all | |
98 | # the Exim files under one directory such as /usr/exim; others just let the | |
99 | # Exim binaries go into an existing directory such as /usr/sbin or | |
100 | # /usr/local/sbin. The installation script will try to create this directory, | |
101 | # and any superior directories, if they do not exist. | |
102 | ||
103 | BIN_DIRECTORY=/usr/exim/bin | |
104 | ||
105 | ||
106 | #------------------------------------------------------------------------------ | |
107 | # CONFIGURE_FILE defines where Exim's run time configuration file is to be | |
108 | # found. It is the complete pathname for the file, not just a directory. The | |
109 | # location of all other run time files and directories can be changed in the | |
110 | # run time configuration file. There is a lot of variety in the choice of | |
111 | # location in different OS, and in the preferences of different sysadmins. Some | |
112 | # common locations are in /etc or /etc/mail or /usr/local/etc or | |
113 | # /usr/local/etc/mail. Another possibility is to keep all the Exim files under | |
114 | # a single directory such as /usr/exim. Whatever you choose, the installation | |
115 | # script will try to make the directory and any superior directories if they | |
116 | # don't exist. It will also install a default runtime configuration if this | |
117 | # file does not exist. | |
118 | ||
119 | CONFIGURE_FILE=/usr/exim/configure | |
120 | ||
121 | # It is possible to specify a colon-separated list of files for CONFIGURE_FILE. | |
122 | # In this case, Exim will use the first of them that exists when it is run. | |
123 | # However, if a list is specified, the installation script no longer tries to | |
124 | # make superior directories or to install a default runtime configuration. | |
125 | ||
126 | ||
127 | #------------------------------------------------------------------------------ | |
128 | # The Exim binary must normally be setuid root, so that it starts executing as | |
129 | # root, but (depending on the options with which it is called) it does not | |
130 | # always need to retain the root privilege. These settings define the user and | |
131 | # group that is used for Exim processes when they no longer need to be root. In | |
132 | # particular, this applies when receiving messages and when doing remote | |
133 | # deliveries. (Local deliveries run as various non-root users, typically as the | |
134 | # owner of a local mailbox.) Specifying these values as root is very strongly | |
135 | # discouraged. | |
136 | ||
137 | EXIM_USER= | |
138 | ||
139 | # If you specify EXIM_USER as a name, this is looked up at build time, and the | |
140 | # uid number is built into the binary. However, you can specify that this | |
141 | # lookup is deferred until runtime. In this case, it is the name that is built | |
142 | # into the binary. You can do this by a setting of the form: | |
143 | ||
144 | # EXIM_USER=ref:exim | |
145 | ||
146 | # In other words, put "ref:" in front of the user name. If you set EXIM_USER | |
147 | # like this, any value specified for EXIM_GROUP is also passed "by reference". | |
148 | # Although this costs a bit of resource at runtime, it is convenient to use | |
149 | # this feature when building binaries that are to be run on multiple systems | |
150 | # where the name may refer to different uids. It also allows you to build Exim | |
151 | # on a system where there is no Exim user defined. | |
152 | ||
153 | # If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must | |
154 | # also be a setting of EXIM_GROUP. If, on the other hand, you use a name | |
155 | # for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless | |
156 | # you want to use a group other than the default group for the given user. | |
157 | ||
158 | # EXIM_GROUP= | |
159 | ||
160 | # Many sites define a user called "exim", with an appropriate default group, | |
161 | # and use | |
162 | # | |
163 | # EXIM_USER=exim | |
164 | # | |
165 | # while leaving EXIM_GROUP unspecified (commented out). | |
166 | ||
167 | ||
168 | #------------------------------------------------------------------------------ | |
169 | # SPOOL_DIRECTORY defines the directory where all the data for messages in | |
170 | # transit is kept. It is strongly recommended that you define it here, though | |
171 | # it is possible to leave this till the run time configuration. | |
172 | ||
173 | # Exim creates the spool directory if it does not exist. The owner and group | |
174 | # will be those defined by EXIM_USER and EXIM_GROUP, and this also applies to | |
175 | # all the files and directories that are created in the spool directory. | |
176 | ||
177 | # Almost all installations choose this: | |
178 | ||
179 | SPOOL_DIRECTORY=/var/spool/exim | |
180 | ||
181 | ||
182 | ||
183 | ############################################################################### | |
184 | # THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY # | |
185 | ############################################################################### | |
186 | ||
187 | # You need to specify some routers and transports if you want the Exim that you | |
188 | # are building to be capable of delivering mail. You almost certainly need at | |
189 | # least one type of lookup. You should consider whether you want to build | |
190 | # the Exim monitor or not. | |
191 | ||
192 | ||
193 | #------------------------------------------------------------------------------ | |
194 | # These settings determine which individual router drivers are included in the | |
195 | # Exim binary. There are no defaults in the code; those routers that are wanted | |
196 | # must be defined here by setting the appropriate variables to the value "yes". | |
197 | # Including a router in the binary does not cause it to be used automatically. | |
198 | # It has also to be configured in the run time configuration file. By | |
199 | # commenting out those you know you don't want to use, you can make the binary | |
200 | # a bit smaller. If you are unsure, leave all of these included for now. | |
201 | ||
202 | ROUTER_ACCEPT=yes | |
203 | ROUTER_DNSLOOKUP=yes | |
204 | ROUTER_IPLITERAL=yes | |
205 | ROUTER_MANUALROUTE=yes | |
206 | ROUTER_QUERYPROGRAM=yes | |
207 | ROUTER_REDIRECT=yes | |
208 | ||
209 | # This one is very special-purpose, so is not included by default. | |
210 | ||
211 | # ROUTER_IPLOOKUP=yes | |
212 | ||
213 | ||
214 | #------------------------------------------------------------------------------ | |
215 | # These settings determine which individual transport drivers are included in | |
216 | # the Exim binary. There are no defaults; those transports that are wanted must | |
217 | # be defined here by setting the appropriate variables to the value "yes". | |
218 | # Including a transport in the binary does not cause it to be used | |
219 | # automatically. It has also to be configured in the run time configuration | |
220 | # file. By commenting out those you know you don't want to use, you can make | |
221 | # the binary a bit smaller. If you are unsure, leave all of these included for | |
222 | # now. | |
223 | ||
224 | TRANSPORT_APPENDFILE=yes | |
225 | TRANSPORT_AUTOREPLY=yes | |
226 | TRANSPORT_PIPE=yes | |
227 | TRANSPORT_SMTP=yes | |
228 | ||
229 | # This one is special-purpose, and commonly not required, so it is not | |
230 | # included by default. | |
231 | ||
232 | # TRANSPORT_LMTP=yes | |
233 | ||
234 | ||
235 | #------------------------------------------------------------------------------ | |
236 | # The appendfile transport can write messages to local mailboxes in a number | |
237 | # of formats. The code for three specialist formats, maildir, mailstore, and | |
238 | # MBX, is included only when requested. If you do not know what this is about, | |
239 | # leave these settings commented out. | |
240 | ||
241 | # SUPPORT_MAILDIR=yes | |
242 | # SUPPORT_MAILSTORE=yes | |
243 | # SUPPORT_MBX=yes | |
244 | ||
245 | ||
246 | #------------------------------------------------------------------------------ | |
247 | # These settings determine which file and database lookup methods are included | |
248 | # in the binary. See the manual chapter entitled "File and database lookups" | |
249 | # for discussion. DBM and lsearch (linear search) are included by default. If | |
250 | # you are unsure about the others, leave them commented out for now. | |
251 | # LOOKUP_DNSDB does *not* refer to general mail routing using the DNS. It is | |
252 | # for the specialist case of using the DNS as a general database facility (not | |
253 | # common). | |
254 | ||
255 | LOOKUP_DBM=yes | |
256 | LOOKUP_LSEARCH=yes | |
257 | ||
258 | # LOOKUP_CDB=yes | |
259 | # LOOKUP_DNSDB=yes | |
260 | # LOOKUP_DSEARCH=yes | |
261 | # LOOKUP_IBASE=yes | |
262 | # LOOKUP_LDAP=yes | |
263 | # LOOKUP_MYSQL=yes | |
264 | # LOOKUP_NIS=yes | |
265 | # LOOKUP_NISPLUS=yes | |
266 | # LOOKUP_ORACLE=yes | |
267 | # LOOKUP_PASSWD=yes | |
268 | # LOOKUP_PGSQL=yes | |
269 | # LOOKUP_WHOSON=yes | |
270 | ||
271 | # These two settings are obsolete; all three lookups are compiled when | |
272 | # LOOKUP_LSEARCH is enabled. However, we retain these for backward | |
273 | # compatibility. Setting one forces LOOKUP_LSEARCH if it is not set. | |
274 | ||
275 | # LOOKUP_WILDLSEARCH=yes | |
276 | # LOOKUP_NWILDLSEARCH=yes | |
277 | ||
278 | ||
279 | #------------------------------------------------------------------------------ | |
280 | # If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate | |
281 | # which LDAP library you have. Unfortunately, though most of their functions | |
282 | # are the same, there are minor differences. Currently Exim knows about four | |
283 | # LDAP libraries: the one from the University of Michigan (also known as | |
284 | # OpenLDAP 1), OpenLDAP 2, the Netscape SDK library, and the library that comes | |
285 | # with Solaris 7 onwards. Uncomment whichever of these you are using. | |
286 | ||
287 | # LDAP_LIB_TYPE=OPENLDAP1 | |
288 | # LDAP_LIB_TYPE=OPENLDAP2 | |
289 | # LDAP_LIB_TYPE=NETSCAPE | |
290 | # LDAP_LIB_TYPE=SOLARIS | |
291 | ||
292 | # If you don't set any of these, Exim assumes the original University of | |
293 | # Michigan (OpenLDAP 1) library. | |
294 | ||
295 | ||
296 | #------------------------------------------------------------------------------ | |
297 | # Additional libraries and include directories may be required for some | |
298 | # lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on | |
299 | # the command for linking Exim itself, not on any auxiliary programs. You | |
300 | # don't need to set LOOKUP_INCLUDE if the relevant directories are already | |
301 | # specified in INCLUDE. The settings below are just examples; -lpq is for | |
302 | # PostgreSQL, -lgds is for Interbase. | |
303 | ||
304 | # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include | |
305 | # LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds | |
306 | ||
307 | #------------------------------------------------------------------------------ | |
308 | # Compiling the Exim monitor: If you want to compile the Exim monitor, a | |
309 | # program that requires an X11 display, then EXIM_MONITOR should be set to the | |
310 | # value "eximon.bin". Comment out this setting to disable compilation of the | |
311 | # monitor. The locations of various X11 directories for libraries and include | |
312 | # files are defaulted in the OS/Makefile-Default file, but can be overridden in | |
313 | # local OS-specific make files. | |
314 | ||
315 | EXIM_MONITOR=eximon.bin | |
316 | ||
317 | ||
318 | ||
319 | ############################################################################### | |
320 | # THESE ARE THINGS YOU MIGHT WANT TO SPECIFY # | |
321 | ############################################################################### | |
322 | ||
323 | # The items in this section are those that are commonly changed according to | |
324 | # the sysadmin's preferences, but whose defaults are often acceptable. The | |
325 | # first five are concerned with security issues, where differing levels of | |
326 | # paranoia are appropriate in different environments. Sysadmins also vary in | |
327 | # their views on appropriate levels of defence in these areas. If you do not | |
328 | # understand these issues, go with the defaults, which are used by many sites. | |
329 | ||
330 | ||
331 | #------------------------------------------------------------------------------ | |
332 | # Although Exim is normally a setuid program, owned by root, it refuses to run | |
333 | # local deliveries as root by default. There is a runtime option called | |
334 | # "never_users" which lists the users that must never be used for local | |
335 | # deliveries. There is also the setting below, which provides a list that | |
336 | # cannot be overridden at runtime. This guards against problems caused by | |
337 | # unauthorized changes to the runtime configuration. You are advised not to | |
338 | # remove "root" from this option, but you can add other users if you want. The | |
926e1192 | 339 | # list is colon-separated. It must NOT contain any spaces. |
059ec3d9 | 340 | |
926e1192 | 341 | # FIXED_NEVER_USERS=root:bin:daemon |
059ec3d9 PH |
342 | FIXED_NEVER_USERS=root |
343 | ||
344 | ||
345 | #------------------------------------------------------------------------------ | |
346 | # By default, Exim insists that its configuration file be owned either by root | |
347 | # or by the Exim user. You can specify one additional permitted owner here. | |
348 | ||
349 | # CONFIGURE_OWNER= | |
350 | ||
35edf2ff PH |
351 | # If the configuration file is group-writeable, Exim insists by default that it |
352 | # is owned by root or the Exim user. You can specify one additional permitted | |
353 | # group owner here. | |
354 | ||
355 | # CONFIGURE_GROUP= | |
356 | ||
357 | # If you specify CONFIGURE_OWNER or CONFIGURE_GROUP as a name, this is looked | |
358 | # up at build time, and the uid or gid number is built into the binary. | |
359 | # However, you can specify that the lookup is deferred until runtime. In this | |
360 | # case, it is the name that is built into the binary. You can do this by a | |
361 | # setting of the form: | |
059ec3d9 PH |
362 | |
363 | # CONFIGURE_OWNER=ref:mail | |
35edf2ff | 364 | # CONFIGURE_GROUP=ref:sysadmin |
059ec3d9 | 365 | |
35edf2ff PH |
366 | # In other words, put "ref:" in front of the user or group name. Although this |
367 | # costs a bit of resource at runtime, it is convenient to use this feature when | |
368 | # building binaries that are to be run on multiple systems where the names may | |
369 | # refer to different uids or gids. It also allows you to build Exim on a system | |
370 | # where the relevant user or group is not defined. | |
059ec3d9 PH |
371 | |
372 | ||
373 | #------------------------------------------------------------------------------ | |
374 | # The -C option allows Exim to be run with an alternate runtime configuration | |
375 | # file. When this is used by root or the Exim user, root privilege is retained | |
376 | # by the binary (for any other caller, it is dropped). You can restrict the | |
377 | # location of alternate configurations by defining a prefix below. Any file | |
378 | # used with -C must then start with this prefix (except that /dev/null is also | |
379 | # permitted if the caller is root, because that is used in the install script). | |
380 | # If the prefix specifies a directory that is owned by root, a compromise of | |
381 | # the Exim account does not permit arbitrary alternate configurations to be | |
382 | # used. The prefix can be more restrictive than just a directory (the second | |
383 | # example). | |
384 | ||
385 | # ALT_CONFIG_PREFIX=/some/directory/ | |
386 | # ALT_CONFIG_PREFIX=/some/directory/exim.conf- | |
387 | ||
388 | ||
389 | #------------------------------------------------------------------------------ | |
390 | # If you uncomment the following line, only root may use the -C or -D options | |
391 | # without losing root privilege. The -C option specifies an alternate runtime | |
392 | # configuration file, and the -D option changes macro values in the runtime | |
393 | # configuration. Uncommenting this line restricts what can be done with these | |
394 | # options. A call to receive a message (either one-off or via a daemon) cannot | |
395 | # successfully continue to deliver it, because the re-exec of Exim to regain | |
396 | # root privilege will fail, owing to the use of -C or -D by the Exim user. | |
397 | # However, you can still use -C for testing (as root) if you do separate Exim | |
398 | # calls for receiving a message and subsequently delivering it. | |
399 | ||
400 | # ALT_CONFIG_ROOT_ONLY=yes | |
401 | ||
402 | ||
403 | #------------------------------------------------------------------------------ | |
404 | # Uncommenting this option disables the use of the -D command line option, | |
405 | # which changes the values of macros in the runtime configuration file. | |
406 | # This is another protection against somebody breaking into the Exim account. | |
407 | ||
408 | # DISABLE_D_OPTION=yes | |
409 | ||
410 | ||
411 | #------------------------------------------------------------------------------ | |
412 | # Exim has support for the AUTH (authentication) extension of the SMTP | |
413 | # protocol, as defined by RFC 2554. If you don't know what SMTP authentication | |
414 | # is, you probably won't want to include this code, so you should leave these | |
415 | # settings commented out. If you do want to make use of SMTP authentication, | |
416 | # you must uncomment at least one of the following, so that appropriate code is | |
417 | # included in the Exim binary. You will then need to set up the run time | |
418 | # configuration to make use of the mechanism(s) selected. | |
419 | ||
420 | # AUTH_CRAM_MD5=yes | |
421 | # AUTH_CYRUS_SASL=yes | |
422 | # AUTH_PLAINTEXT=yes | |
423 | # AUTH_SPA=yes | |
424 | ||
425 | ||
426 | #------------------------------------------------------------------------------ | |
427 | # If you specified AUTH_CYRUS_SASL above, you should ensure that you have the | |
428 | # Cyrus SASL library installed before trying to build Exim, and you probably | |
429 | # want to uncomment the following line: | |
430 | ||
431 | # AUTH_LIBS=-lsasl2 | |
432 | ||
433 | ||
434 | #------------------------------------------------------------------------------ | |
435 | # When Exim is decoding MIME "words" in header lines, most commonly for use | |
436 | # in the $header_xxx expansion, it converts any foreign character sets to the | |
437 | # one that is set in the headers_charset option. The default setting is | |
438 | # defined by this setting: | |
439 | ||
440 | HEADERS_CHARSET="ISO-8859-1" | |
441 | ||
442 | # If you are going to make use of $header_xxx expansions in your configuration | |
443 | # file, or if your users are going to use them in filter files, and the normal | |
444 | # character set on your host is something other than ISO-8859-1, you might | |
445 | # like to specify a different default here. This value can be overridden in | |
446 | # the runtime configuration, and it can also be overridden in individual filter | |
447 | # files. | |
448 | # | |
449 | # IMPORTANT NOTE: The iconv() function is needed for character code | |
450 | # conversions. Please see the next item... | |
451 | ||
452 | ||
453 | #------------------------------------------------------------------------------ | |
454 | # Character code conversions are possible only if the iconv() function is | |
455 | # installed on your operating system. There are two places in Exim where this | |
456 | # is relevant: (a) The $header_xxx expansion (see the previous item), and (b) | |
457 | # the Sieve filter support. For those OS where iconv() is known to be installed | |
458 | # as standard, the file in OS/Makefile-xxxx contains | |
459 | # | |
460 | # HAVE_ICONV=yes | |
461 | # | |
462 | # If you are not using one of those systems, but have installed iconv(), you | |
463 | # need to uncomment that line above. In some cases, you may find that iconv() | |
464 | # and its header file are not in the default places. You might need to use | |
465 | # something like this: | |
466 | # | |
467 | # HAVE_ICONV=yes | |
468 | # CFLAGS=-O -I/usr/local/include | |
469 | # EXTRALIBS_EXIM=-L/usr/local/lib -liconv | |
470 | # | |
471 | # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM | |
472 | # as well. | |
473 | ||
474 | ||
475 | #------------------------------------------------------------------------------ | |
476 | # The passwords for user accounts are normally encrypted with the crypt() | |
477 | # function. Comparisons with encrypted passwords can be done using Exim's | |
478 | # "crypteq" expansion operator. (This is commonly used as part of the | |
479 | # configuration of an authenticator for use with SMTP AUTH.) At least one | |
480 | # operating system has an extended function called crypt16(), which uses up to | |
481 | # 16 characters of a password (the normal crypt() uses only the first 8). Exim | |
482 | # supports the use of crypt16() as well as crypt(). | |
483 | ||
484 | # You can always indicate a crypt16-encrypted password by preceding it with | |
485 | # "{crypt16}". If you want the default handling (without any preceding | |
486 | # indicator) to use crypt16(), uncomment the following line: | |
487 | ||
488 | # DEFAULT_CRYPT=crypt16 | |
489 | ||
490 | # If you do that, you can still access the basic crypt() function by preceding | |
491 | # an encrypted password with "{crypt}". For more details, see the description | |
492 | # of the "crypteq" condition in the manual chapter on string expansions. | |
493 | ||
494 | # Since most operating systems do not include a crypt16() function (yet?), Exim | |
495 | # has one of its own, which it uses unless HAVE_CRYPT16 is defined. Normally, | |
496 | # that will be set in an OS-specific Makefile for the OS that have such a | |
497 | # function, so you should not need to bother with it. | |
498 | ||
499 | ||
500 | #------------------------------------------------------------------------------ | |
501 | # Exim can be built to support the SMTP STARTTLS command, which implements | |
502 | # Transport Layer Security using SSL (Secure Sockets Layer). To do this, you | |
503 | # must install the OpenSSL library package or the GnuTLS library. Exim contains | |
504 | # no cryptographic code of its own. Uncomment the following lines if you want | |
505 | # to build Exim with TLS support. If you don't know what this is all about, | |
506 | # leave these settings commented out. | |
507 | ||
508 | # This setting is required for any TLS support (either OpenSSL or GnuTLS) | |
509 | # SUPPORT_TLS=yes | |
510 | ||
511 | # Uncomment this setting if you are using OpenSSL | |
512 | # TLS_LIBS=-lssl -lcrypto | |
513 | ||
514 | # Uncomment these settings if you are using GnuTLS | |
515 | # USE_GNUTLS=yes | |
516 | # TLS_LIBS=-lgnutls -ltasn1 -lgcrypt | |
517 | ||
518 | # If you are running Exim as a server, note that just building it with TLS | |
519 | # support is not all you need to do. You also need to set up a suitable | |
520 | # certificate, and tell Exim about it by means of the tls_certificate | |
521 | # and tls_privatekey run time options. You also need to set tls_advertise_hosts | |
522 | # to specify the hosts to which Exim advertises TLS support. On the other hand, | |
523 | # if you are running Exim only as a client, building it with TLS support | |
524 | # is all you need to do. | |
525 | ||
526 | # Additional libraries and include files are required for both OpenSSL and | |
527 | # GnuTLS. The TLS_LIBS settings above assume that the libraries are installed | |
528 | # with all your other libraries. If they are in a special directory, you may | |
529 | # need something like | |
530 | ||
531 | # TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto | |
532 | # or | |
533 | # TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt | |
534 | ||
535 | # TLS_LIBS is included only on the command for linking Exim itself, not on any | |
536 | # auxiliary programs. If the include files are not in a standard place, you can | |
537 | # set TLS_INCLUDE to specify where they are, for example: | |
538 | ||
539 | # TLS_INCLUDE=-I/usr/local/openssl/include/ | |
540 | # or | |
541 | # TLS_INCLUDE=-I/opt/gnu/include | |
542 | ||
543 | # You don't need to set TLS_INCLUDE if the relevant directories are already | |
544 | # specified in INCLUDE. | |
545 | ||
546 | ||
547 | #------------------------------------------------------------------------------ | |
548 | # The default distribution of Exim contains only the plain text form of the | |
549 | # documentation. Other forms are available separately. If you want to install | |
550 | # the documentation in "info" format, first fetch the Texinfo documentation | |
551 | # sources from the ftp directory and unpack them, which should create files | |
552 | # with the extension "texinfo" in the doc directory. You may find that the | |
553 | # version number of the texinfo files is different to your Exim version number, | |
554 | # because the main documentation isn't updated as often as the code. For | |
555 | # example, if you have Exim version 4.43, the source tarball upacks into a | |
556 | # directory called exim-4.43, but the texinfo tarball unpacks into exim-4.40. | |
557 | # In this case, move the contents of exim-4.40/doc into exim-4.43/doc after you | |
558 | # have unpacked them. Then set INFO_DIRECTORY to the location of your info | |
559 | # directory. This varies from system to system, but is often /usr/share/info. | |
560 | # Once you have done this, "make install" will build the info files and | |
561 | # install them in the directory you have defined. | |
562 | ||
563 | # INFO_DIRECTORY=/usr/share/info | |
564 | ||
565 | ||
566 | #------------------------------------------------------------------------------ | |
567 | # Exim log directory and files: Exim creates several log files inside a | |
568 | # single log directory. You can define the directory and the form of the | |
569 | # log file name here. If you do not set anything, Exim creates a directory | |
570 | # called "log" inside its spool directory (see SPOOL_DIRECTORY above) and uses | |
571 | # the filenames "mainlog", "paniclog", and "rejectlog". If you want to change | |
572 | # this, you can set LOG_FILE_PATH to a path name containing one occurrence of | |
573 | # %s. This will be replaced by one of the strings "main", "panic", or "reject" | |
574 | # to form the final file names. Some installations may want something like this: | |
575 | ||
576 | # LOG_FILE_PATH=/var/log/exim_%slog | |
577 | ||
578 | # which results in files with names /var/log/exim_mainlog, etc. The directory | |
579 | # in which the log files are placed must exist; Exim does not try to create | |
580 | # it for itself. It is also your responsibility to ensure that Exim is capable | |
581 | # of writing files using this path name. The Exim user (see EXIM_USER above) | |
582 | # must be able to create and update files in the directory you have specified. | |
583 | ||
584 | # You can also configure Exim to use syslog, instead of or as well as log | |
585 | # files, by settings such as these | |
586 | ||
587 | # LOG_FILE_PATH=syslog | |
588 | # LOG_FILE_PATH=syslog:/var/log/exim_%slog | |
589 | ||
590 | # The first of these uses only syslog; the second uses syslog and also writes | |
591 | # to log files. Do not include white space in such a setting as it messes up | |
592 | # the building process. | |
593 | ||
594 | ||
595 | #------------------------------------------------------------------------------ | |
596 | # When logging to syslog, the following option caters for syslog replacements | |
597 | # that are able to accept log entries longer than the 1024 characters allowed | |
598 | # by RFC 3164. It is up to you to make sure your syslog daemon can handle this. | |
599 | # Non-printable characters are usually unacceptable regardless, so log entries | |
600 | # are still split on newline characters. | |
601 | ||
602 | # SYSLOG_LONG_LINES=yes | |
603 | ||
604 | # If you are not interested in the process identifier (pid) of the Exim that is | |
605 | # making the call to syslog, then comment out the following line. | |
606 | ||
607 | SYSLOG_LOG_PID=yes | |
608 | ||
609 | ||
610 | #------------------------------------------------------------------------------ | |
611 | # Cycling log files: this variable specifies the maximum number of old | |
612 | # log files that are kept by the exicyclog log-cycling script. You don't have | |
613 | # to use exicyclog. If your operating system has other ways of cycling log | |
614 | # files, you can use them instead. The exicyclog script isn't run by default; | |
615 | # you have to set up a cron job for it if you want it. | |
616 | ||
617 | EXICYCLOG_MAX=10 | |
618 | ||
619 | ||
620 | #------------------------------------------------------------------------------ | |
621 | # The compress command is used by the exicyclog script to compress old log | |
622 | # files. Both the name of the command and the suffix that it adds to files | |
623 | # need to be defined here. See also the EXICYCLOG_MAX configuration. | |
624 | ||
625 | COMPRESS_COMMAND=/usr/bin/gzip | |
626 | COMPRESS_SUFFIX=gz | |
627 | ||
628 | ||
629 | #------------------------------------------------------------------------------ | |
630 | # If the exigrep utility is fed compressed log files, it tries to uncompress | |
631 | # them using this command. | |
632 | ||
633 | ZCAT_COMMAND=/usr/bin/zcat | |
634 | ||
635 | ||
636 | #------------------------------------------------------------------------------ | |
637 | # Compiling in support for embedded Perl: If you want to be able to | |
638 | # use Perl code in Exim's string manipulation language and you have Perl | |
639 | # (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded | |
640 | # Perl costs quite a lot of resources. Only do this if you really need it. | |
641 | ||
642 | # EXIM_PERL=perl.o | |
643 | ||
644 | ||
645 | #------------------------------------------------------------------------------ | |
646 | # Exim has support for PAM (Pluggable Authentication Modules), a facility | |
647 | # which is available in the latest releases of Solaris and in some GNU/Linux | |
648 | # distributions (see http://ftp.kernel.org/pub/linux/libs/pam/). The Exim | |
649 | # support, which is intended for use in conjunction with the SMTP AUTH | |
650 | # facilities, is included only when requested by the following setting: | |
651 | ||
652 | # SUPPORT_PAM=yes | |
653 | ||
654 | # You probably need to add -lpam to EXTRALIBS, and in some releases of | |
655 | # GNU/Linux -ldl is also needed. | |
656 | ||
657 | ||
658 | #------------------------------------------------------------------------------ | |
659 | # Support for authentication via Radius is also available. The Exim support, | |
660 | # which is intended for use in conjunction with the SMTP AUTH facilities, | |
661 | # is included only when requested by setting the following parameter to the | |
662 | # location of your Radius configuration file: | |
663 | ||
664 | # RADIUS_CONFIG_FILE=/etc/radiusclient/radiusclient.conf | |
665 | # RADIUS_CONFIG_FILE=/etc/radius.conf | |
666 | ||
667 | # If you have set RADIUS_CONFIG_FILE, you should also set one of these to | |
668 | # indicate which RADIUS library is used: | |
669 | # | |
670 | # RADIUSCLIENT is the radiusclient library; you probably need to add | |
671 | # -libradiusclient to EXTRALIBS | |
672 | # | |
673 | # RADLIB is the Radius library that comes with FreeBSD (the header file is | |
674 | # called radlib.h); you probably need to add -lradius to EXTRALIBS | |
675 | ||
676 | # RADIUS_LIB_TYPE=RADIUSCLIENT | |
677 | # RADIUS_LIB_TYPE=RADLIB | |
678 | ||
679 | # If you don't set one of these, Exim assumes the radiusclient library. | |
680 | ||
681 | ||
682 | #------------------------------------------------------------------------------ | |
683 | # Support for authentication via the Cyrus SASL pwcheck daemon is available. | |
684 | # Note, however, that pwcheck is now deprecated in favour of saslauthd (see | |
685 | # next item). The Exim support for pwcheck, which is intented for use in | |
686 | # conjunction with the SMTP AUTH facilities, is included only when requested by | |
687 | # setting the following parameter to the location of the pwcheck daemon's | |
688 | # socket. | |
689 | # | |
690 | # There is no need to install all of SASL on your system. You just need to run | |
691 | # ./configure --with-pwcheck, cd to the pwcheck directory within the sources, | |
692 | # make and make install. You must create the socket directory (default | |
693 | # /var/pwcheck) and chown it to exim's user and group. Once you have installed | |
694 | # pwcheck, you should arrange for it to be started by root at boot time. | |
695 | ||
696 | # CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck | |
697 | ||
698 | ||
699 | #------------------------------------------------------------------------------ | |
700 | # Support for authentication via the Cyrus SASL saslauthd daemon is available. | |
701 | # The Exim support, which is intented for use in conjunction with the SMTP AUTH | |
702 | # facilities, is included only when requested by setting the following | |
703 | # parameter to the location of the saslauthd daemon's socket. | |
704 | # | |
705 | # There is no need to install all of SASL on your system. You just need to run | |
706 | # ./configure --with-saslauthd (and any other options you need, for example, to | |
707 | # select or deselect authentication mechanisms), cd to the saslauthd directory | |
708 | # within the sources, make and make install. You must create the socket | |
709 | # directory (default /var/state/saslauthd) and chown it to exim's user and | |
710 | # group. Once you have installed saslauthd, you should arrange for it to be | |
711 | # started by root at boot time. | |
712 | ||
713 | # CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux | |
714 | ||
715 | ||
716 | #------------------------------------------------------------------------------ | |
717 | # TCP wrappers: If you want to use tcpwrappers from within Exim, uncomment | |
718 | # this setting. See the manual section entitled "Use of tcpwrappers" in the | |
719 | # chapter on building and installing Exim. | |
720 | # | |
721 | # USE_TCP_WRAPPERS=yes | |
722 | # | |
723 | # You may well also have to specify a local "include" file and an additional | |
724 | # library for TCP wrappers, so you probably need something like this: | |
725 | # | |
726 | # USE_TCP_WRAPPERS=yes | |
727 | # CFLAGS=-O -I/usr/local/include | |
728 | # EXTRALIBS_EXIM=-L/usr/local/lib -lwrap | |
729 | # | |
730 | # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM | |
731 | # as well. | |
732 | ||
733 | ||
734 | #------------------------------------------------------------------------------ | |
735 | # The default action of the exim_install script (which is run by "make | |
736 | # install") is to install the Exim binary with a unique name such as | |
737 | # exim-4.43-1, and then set up a symbolic link called "exim" to reference it, | |
738 | # moving the symbolic link from any previous version. If you define NO_SYMLINK | |
739 | # (the value doesn't matter), the symbolic link is not created or moved. You | |
740 | # will then have to "turn Exim on" by setting up the link manually. | |
741 | ||
742 | # NO_SYMLINK=yes | |
743 | ||
744 | ||
745 | #------------------------------------------------------------------------------ | |
746 | # Another default action of the install script is to install a default runtime | |
747 | # configuration file if one does not exist. This configuration has a router for | |
748 | # expanding system aliases. The default assumes that these aliases are kept | |
749 | # in the traditional file called /etc/aliases. If such a file does not exist, | |
750 | # the installation script creates one that contains just comments (no actual | |
751 | # aliases). The following setting can be changed to specify a different | |
752 | # location for the system alias file. | |
753 | ||
754 | SYSTEM_ALIASES_FILE=/etc/aliases | |
755 | ||
756 | ||
757 | #------------------------------------------------------------------------------ | |
758 | # There are some testing options (-be, -bt, -bv) that read data from the | |
759 | # standard input when no arguments are supplied. By default, the input lines | |
760 | # are read using the standard fgets() function. This does not support line | |
761 | # editing during interactive input (though the terminal's "erase" character | |
762 | # works as normal). If your operating system has the readline() function, and | |
763 | # in addition supports dynamic loading of library functions, you can cause | |
764 | # Exim to use readline() for the -be testing option (only) by uncommenting the | |
765 | # following setting. Dynamic loading is used so that the library is loaded only | |
766 | # when the -be testing option is given; by the time the loading occurs, | |
767 | # Exim has given up its root privilege and is running as the calling user. This | |
768 | # is the reason why readline() is NOT supported for -bt and -bv, because Exim | |
769 | # runs as root or as exim, respectively, for those options. When USE_READLINE | |
770 | # is "yes", as well as supporting line editing, a history of input lines in the | |
771 | # current run is maintained. | |
772 | ||
773 | # USE_READLINE=yes | |
774 | ||
775 | ||
776 | ||
777 | ############################################################################### | |
778 | # THINGS YOU ALMOST NEVER NEED TO MENTION # | |
779 | ############################################################################### | |
780 | ||
781 | # The settings in this section are available for use in special circumstances. | |
782 | # In the vast majority of installations you need not change anything below. | |
783 | ||
784 | ||
785 | #------------------------------------------------------------------------------ | |
786 | # The following commands live in different places in some OS. Either the | |
787 | # ultimate default settings, or the OS-specific files should already point to | |
788 | # the right place, but they can be overridden here if necessary. These settings | |
789 | # are used when building various scripts to ensure that the correct paths are | |
790 | # used when the scripts are run. They are not used in the Makefile itself. Perl | |
791 | # is not necessary for running Exim unless you set EXIM_PERL (see above) to get | |
792 | # it embedded, but there are some utilities that are Perl scripts. If you | |
793 | # haven't got Perl, Exim will still build and run; you just won't be able to | |
794 | # use those utilities. | |
795 | ||
796 | # CHOWN_COMMAND=/usr/bin/chown | |
797 | # CHGRP_COMMAND=/usr/bin/chgrp | |
798 | # MV_COMMAND=/bin/mv | |
799 | # RM_COMMAND=/bin/rm | |
800 | # PERL_COMMAND=/usr/bin/perl | |
801 | ||
802 | ||
803 | #------------------------------------------------------------------------------ | |
804 | # The following macro can be used to change the command for building a library | |
805 | # of functions. By default the "ar" command is used, with options "cq". | |
806 | # Only in rare circumstances should you need to change this. | |
807 | ||
808 | # AR=ar cq | |
809 | ||
810 | ||
811 | #------------------------------------------------------------------------------ | |
812 | # In some operating systems, the value of the TMPDIR environment variable | |
813 | # controls where temporary files are created. Exim does not make use of | |
814 | # temporary files, except when delivering to MBX mailboxes. However, if Exim | |
815 | # calls any external libraries (e.g. DBM libraries), they may use temporary | |
816 | # files, and thus be influenced by the value of TMPDIR. For this reason, when | |
817 | # Exim starts, it checks the environment for TMPDIR, and if it finds it is set, | |
818 | # it replaces the value with what is defined here. Commenting this setting | |
819 | # suppresses the check altogether. | |
820 | ||
821 | TMPDIR="/tmp" | |
822 | ||
823 | ||
824 | #------------------------------------------------------------------------------ | |
825 | # The following macros can be used to change the default modes that are used | |
826 | # by the appendfile transport. In most installations the defaults are just | |
827 | # fine, and in any case, you can change particular instances of the transport | |
828 | # at run time if you want. | |
829 | ||
830 | # APPENDFILE_MODE=0600 | |
831 | # APPENDFILE_DIRECTORY_MODE=0700 | |
832 | # APPENDFILE_LOCKFILE_MODE=0600 | |
833 | ||
834 | ||
835 | #------------------------------------------------------------------------------ | |
836 | # In some installations there may be multiple machines sharing file systems, | |
837 | # where a different configuration file is required for Exim on the different | |
838 | # machines. If CONFIGURE_FILE_USE_NODE is defined, then Exim will first look | |
839 | # for a configuration file whose name is that defined by CONFIGURE_FILE, | |
840 | # with the node name obtained by uname() tacked on the end, separated by a | |
841 | # period (for example, /usr/exim/configure.host.in.some.domain). If this file | |
842 | # does not exist, then the bare configuration file name is tried. | |
843 | ||
844 | # CONFIGURE_FILE_USE_NODE=yes | |
845 | ||
846 | ||
847 | #------------------------------------------------------------------------------ | |
848 | # In some esoteric configurations two different versions of Exim are run, | |
849 | # with different setuid values, and different configuration files are required | |
850 | # to handle the different cases. If CONFIGURE_FILE_USE_EUID is defined, then | |
851 | # Exim will first look for a configuration file whose name is that defined | |
852 | # by CONFIGURE_FILE, with the effective uid tacked on the end, separated by | |
853 | # a period (for eximple, /usr/exim/configure.0). If this file does not exist, | |
854 | # then the bare configuration file name is tried. In the case when both | |
855 | # CONFIGURE_FILE_USE_EUID and CONFIGURE_FILE_USE_NODE are set, four files | |
856 | # are tried: <name>.<euid>.<node>, <name>.<node>, <name>.<euid>, and <name>. | |
857 | ||
858 | # CONFIGURE_FILE_USE_EUID=yes | |
859 | ||
860 | ||
861 | #------------------------------------------------------------------------------ | |
862 | # The size of the delivery buffers: These specify the sizes (in bytes) of | |
863 | # the buffers that are used when copying a message from the spool to a | |
864 | # destination. There is rarely any need to change these values. | |
865 | ||
866 | # DELIVER_IN_BUFFER_SIZE=8192 | |
867 | # DELIVER_OUT_BUFFER_SIZE=8192 | |
868 | ||
869 | ||
870 | #------------------------------------------------------------------------------ | |
871 | # The mode of the database directory: Exim creates a directory called "db" | |
872 | # in its spool directory, to hold its databases of hints. This variable | |
873 | # determines the mode of the created directory. The default value in the | |
874 | # source is 0750. | |
875 | ||
876 | # EXIMDB_DIRECTORY_MODE=0750 | |
877 | ||
878 | ||
879 | #------------------------------------------------------------------------------ | |
880 | # Database file mode: The mode of files created in the "db" directory defaults | |
881 | # to 0640 in the source, and can be changed here. | |
882 | ||
883 | # EXIMDB_MODE=0640 | |
884 | ||
885 | ||
886 | #------------------------------------------------------------------------------ | |
887 | # Database lock file mode: The mode of zero-length files created in the "db" | |
888 | # directory to use for locking purposes defaults to 0640 in the source, and | |
889 | # can be changed here. | |
890 | ||
891 | # EXIMDB_LOCKFILE_MODE=0640 | |
892 | ||
893 | ||
894 | #------------------------------------------------------------------------------ | |
895 | # This parameter sets the maximum length of the header portion of a message | |
896 | # that Exim is prepared to process. The default setting is one megabyte. The | |
897 | # limit exists in order to catch rogue mailers that might connect to your SMTP | |
898 | # port, start off a header line, and then just pump junk at it for ever. The | |
899 | # message_size_limit option would also catch this, but it may not be set. | |
900 | # The value set here is the default; it can be changed at runtime. | |
901 | ||
902 | # HEADER_MAXSIZE="(1024*1024)" | |
903 | ||
904 | ||
905 | #------------------------------------------------------------------------------ | |
906 | # The mode of the input directory: The input directory is where messages are | |
907 | # kept while awaiting delivery. Exim creates it if necessary, using a mode | |
908 | # which can be defined here (default 0750). | |
909 | ||
910 | # INPUT_DIRECTORY_MODE=0750 | |
911 | ||
912 | ||
913 | #------------------------------------------------------------------------------ | |
914 | # The mode of Exim's log directory, when it is created by Exim inside the spool | |
915 | # directory, defaults to 0750 but can be changed here. | |
916 | ||
917 | # LOG_DIRECTORY_MODE=0750 | |
918 | ||
919 | ||
920 | #------------------------------------------------------------------------------ | |
921 | # The log files themselves are created as required, with a mode that defaults | |
922 | # to 0640, but which can be changed here. | |
923 | ||
924 | # LOG_MODE=0640 | |
925 | ||
926 | ||
927 | #------------------------------------------------------------------------------ | |
928 | # The TESTDB lookup is for performing tests on the handling of lookup results, | |
929 | # and is not useful for general running. It should be included only when | |
930 | # debugging the code of Exim. | |
931 | ||
932 | # LOOKUP_TESTDB=yes | |
933 | ||
934 | ||
935 | #------------------------------------------------------------------------------ | |
936 | # /bin/sh is used by default as the shell in which to run commands that are | |
937 | # defined in the makefiles. This can be changed if necessary, by uncommenting | |
938 | # this line and specifying another shell, but note that a Bourne-compatible | |
939 | # shell is expected. | |
940 | ||
941 | # MAKE_SHELL=/bin/sh | |
942 | ||
943 | ||
944 | #------------------------------------------------------------------------------ | |
945 | # The maximum number of named lists of each type (address, domain, host, and | |
946 | # local part) can be increased by changing this value. It should be set to | |
947 | # a multiple of 16. | |
948 | ||
949 | # MAX_NAMED_LIST=16 | |
950 | ||
951 | ||
952 | #------------------------------------------------------------------------------ | |
953 | # Network interfaces: Unless you set the local_interfaces option in the runtime | |
954 | # configuration file to restrict Exim to certain interfaces only, it will run | |
955 | # code to find all the interfaces there are on your host. Unfortunately, | |
956 | # the call to the OS that does this requires a buffer large enough to hold | |
957 | # data for all the interfaces - it was designed in the days when a host rarely | |
958 | # had more than three or four interfaces. Nowadays hosts can have very many | |
959 | # virtual interfaces running on the same hardware. If you have more than 250 | |
960 | # virtual interfaces, you will need to uncomment this setting and increase the | |
961 | # value. | |
962 | ||
963 | # MAXINTERFACES=250 | |
964 | ||
965 | ||
966 | #------------------------------------------------------------------------------ | |
967 | # Per-message logs: While a message is in the process of being delivered, | |
968 | # comments on its progress are written to a message log, for the benefit of | |
969 | # human administrators. These logs are held in a directory called "msglog" | |
970 | # in the spool directory. Its mode defaults to 0750, but can be changed here. | |
971 | # The message log directory is also used for storing files that are used by | |
972 | # transports for returning data to a message's sender (see the "return_output" | |
973 | # option for transports). | |
974 | ||
975 | # MSGLOG_DIRECTORY_MODE=0750 | |
976 | ||
977 | ||
978 | #------------------------------------------------------------------------------ | |
979 | # There are three options which are used when compiling the Perl interface and | |
980 | # when linking with Perl. The default values for these are placed automatically | |
981 | # at the head of the Makefile by the script which builds it. However, if you | |
982 | # want to override them, you can do so here. | |
983 | ||
984 | # PERL_CC= | |
985 | # PERL_CCOPTS= | |
986 | # PERL_LIBS= | |
987 | ||
988 | ||
989 | #------------------------------------------------------------------------------ | |
990 | # Identifying the daemon: When an Exim daemon starts up, it writes its pid | |
991 | # (process id) to a file so that it can easily be identified. The path of the | |
992 | # file can be specified here. Some installations may want something like this: | |
993 | ||
994 | # PID_FILE_PATH=/var/lock/exim.pid | |
995 | ||
996 | # If PID_FILE_PATH is not defined, Exim writes a file in its spool directory | |
997 | # using the name "exim-daemon.pid". | |
998 | ||
999 | # If you start up a daemon without the -bd option (for example, with just | |
1000 | # the -q15m option), a pid file is not written. Also, if you override the | |
1001 | # configuration file with the -oX option, no pid file is written. In other | |
1002 | # words, the pid file is written only for a "standard" daemon. | |
1003 | ||
1004 | ||
1005 | #------------------------------------------------------------------------------ | |
1006 | # If Exim creates the spool directory, it is given this mode, defaulting in the | |
1007 | # source to 0750. | |
1008 | ||
1009 | # SPOOL_DIRECTORY_MODE=0750 | |
1010 | ||
1011 | ||
1012 | #------------------------------------------------------------------------------ | |
1013 | # The mode of files on the input spool which hold the contents of messages can | |
1014 | # be changed here. The default is 0640 so that information from the spool is | |
1015 | # available to anyone who is a member of the Exim group. | |
1016 | ||
1017 | # SPOOL_MODE=0640 | |
1018 | ||
1019 | ||
1020 | #------------------------------------------------------------------------------ | |
1021 | # Moving frozen messages: If the following is uncommented, Exim is compiled | |
1022 | # with support for automatically moving frozen messages out of the main spool | |
1023 | # directory, a facility that is found useful by some large installations. A | |
1024 | # run time option is required to cause the moving actually to occur. Such | |
1025 | # messages become "invisible" to the normal management tools. | |
1026 | ||
1027 | # SUPPORT_MOVE_FROZEN_MESSAGES=yes | |
1028 | ||
1029 | # End of EDITME for Exim 4. |