Commit | Line | Data |
---|---|---|
61ec970d | 1 | #! /bin/sh |
14487e4c | 2 | # $Cambridge: exim/src/scripts/exim_install,v 1.2 2005/09/06 13:18:13 ph10 Exp $ |
61ec970d PH |
3 | |
4 | # Script to install Exim binaries in BIN_DIRECTORY, which is defined in | |
5 | # the local Makefile. It expects to be run in a build directory. It needs | |
6 | # to be run as root in order to make exim setuid to root. If exim runs setuid | |
7 | # to (e.g.) exim, this script should be run as that user or root. | |
8 | ||
9 | # This script also installs a default configuration file in CONFIGURE_FILE | |
10 | # if there is no configuration file there, but only if CONFIGURE_FILE specifies | |
11 | # single file. If it specifies a list, no action is taken. | |
12 | ||
13 | # If a default configuration file is installed, the existence of the system | |
14 | # aliases file is tested. A default, containing only comments, is installed if | |
15 | # necessary. | |
16 | ||
17 | # If INFO_DIRECTORY is defined in any of the local Makefiles, and the Exim doc | |
18 | # directory contains the Texinfo documentation, this script also installs a | |
19 | # the info files in INFO_DIRECTORY. | |
20 | ||
21 | # If DESTDIR is defined, all file paths are prefixed with ${DESTDIR}, with the | |
22 | # sole exception of the reference to the system aliases file in the default | |
23 | # configuration, because it is assumed that Exim is not actually going to be | |
24 | # run from this position. For backward compatibility, if DESTDIR is not | |
25 | # defined, ROOT is used instead. | |
26 | ||
27 | # The script can be made to output what it would do, without actually doing | |
28 | # anything, by giving it the option "-n" (cf make). Arguments are the names | |
29 | # of things to install. No arguments installs everything. | |
30 | ||
31 | do_chown=yes | |
32 | do_symlink=yes | |
33 | ||
34 | while [ $# -gt 0 ] ; do | |
35 | case "$1" in | |
36 | -n) | |
37 | real="true || " | |
38 | ver="verification " | |
39 | com=": " | |
40 | echo $com "" | |
41 | echo $com "*** Verification mode only: no commands will actually be obeyed" | |
42 | echo $com "*** You can cut and paste the bits you want to a shell, etc" | |
43 | echo $com "" | |
44 | echo cd `pwd` | |
45 | ;; | |
46 | ||
47 | -no_chown) | |
48 | do_chown=no | |
49 | ;; | |
50 | ||
51 | -no_symlink) | |
52 | do_symlink=no | |
53 | ;; | |
54 | ||
55 | *) | |
56 | break | |
57 | ;; | |
58 | esac | |
59 | shift | |
60 | done | |
61 | ||
62 | # Get the values of BIN_DIRECTORY, CONFIGURE_FILE, INFO_DIRECTORY, NO_SYMLINK, | |
63 | # SYSTEM_ALIASES_FILE, and EXE from the global Makefile (in the build | |
64 | # directory). EXE is empty except in the Cygwin environment. In each case, keep | |
65 | # the latest definition, thus respecting the Makefiles precedence. The sed | |
66 | # sequences here are messy, but have to be very "basic" in order to work on | |
67 | # Solaris, where the regular expressions in sed are primitive indeed. Modify at | |
68 | # your peril. | |
69 | ||
70 | BIN_DIRECTORY=`sed -n -e '/^ *BIN_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
71 | CONFIGURE_FILE=`sed -n -e '/^ *CONFIGURE_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
72 | INFO_DIRECTORY=`sed -n -e '/^ *INFO_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
73 | NO_SYMLINK=`sed -n -e '/^ *NO_SYMLINK *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
14487e4c PH |
74 | |
75 | CHOWN=`sed -n -e '/^ *CHOWN_COMMAND *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
76 | MV=`sed -n -e '/^ *MV_COMMAND *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
77 | ||
61ec970d PH |
78 | SYSTEM_ALIASES_FILE=`sed -n -e '/^ *SYSTEM_ALIASES_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
79 | EXE=`sed -n -e '/^ *EXE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` | |
80 | ||
81 | # Set a default for SYSTEM_ALIASES_FILE | |
82 | ||
83 | if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then | |
84 | SYSTEM_ALIASES_FILE=/etc/aliases | |
85 | fi | |
86 | ||
87 | # Allow INST_xx to over-ride xx | |
88 | case "$INST_BIN_DIRECTORY" in ?*) BIN_DIRECTORY="$INST_BIN_DIRECTORY";; esac | |
89 | case "$INST_CONFIGURE_FILE" in ?*) CONFIGURE_FILE="$INST_CONFIGURE_FILE";; esac | |
90 | case "$INST_INFO_DIRECTORY" in ?*) INFO_DIRECTORY="$INST_INFO_DIRECTORY";; esac | |
91 | case "$INST_SYSTEM_ALIASES_FILE" in ?*) SYSTEM_ALIASES_FILE="$INST_SYSTEM_ALIASES_FILE";; esac | |
92 | ||
14487e4c PH |
93 | case "$INST_CHOWN" in ?*) CHOWN="$INST_CHOWN";; esac |
94 | case "$INST_MV" in ?*) MV="$INST_MV";; esac | |
95 | ||
61ec970d PH |
96 | case "$INST_UID" in '') INST_UID=root;; *) INST_UID="$INST_UID";; esac |
97 | case "$INST_CP" in '') CP=cp;; *) CP="$INST_CP";; esac | |
61ec970d | 98 | case "$INST_LN" in '') LN=ln;; *) LN="$INST_LN";; esac |
61ec970d PH |
99 | case "$INST_CHMOD" in '') CHMOD=chmod;; *) CHMOD="$INST_CHMOD";; esac |
100 | case "$INST_DIRNAME" in '') DIRNAME=dirname;; *) DIRNAME="$INST_DIRNAME";; esac | |
101 | case "$INST_MKDIR" in '') MKDIR=mkdir;; *) MKDIR="$INST_MKDIR";; esac | |
102 | ||
103 | # Allow the user to over-ride xx | |
104 | case "$inst_dest" in ?*) BIN_DIRECTORY="$inst_dest";; esac | |
105 | case "$inst_conf" in ?*) CONFIGURE_FILE="$inst_conf";; esac | |
106 | case "$inst_info" in ?*) INFO_DIRECTORY="$inst_info";; esac | |
107 | case "$inst_aliases" in ?*) SYSTEM_ALIASES_FILE="$inst_aliases";; esac | |
108 | ||
109 | # Insert ${DESTDIR} at the start of all paths so that the whole thing can be | |
110 | # installed under a different file root. For backwards compatibility, use | |
111 | # ${ROOT} if ${DESTDIR} is not set. However, we need to save the value of | |
112 | # the real system aliases file, and use that in the default configuration. | |
113 | ||
114 | ACTUAL_SYSTEM_ALIASES_FILE=${SYSTEM_ALIASES_FILE} | |
115 | DESTDIR=${DESTDIR:-${ROOT}} | |
116 | ||
117 | BIN_DIRECTORY=${DESTDIR}${BIN_DIRECTORY} | |
118 | CONFIGURE_FILE=${DESTDIR}${CONFIGURE_FILE} | |
119 | SYSTEM_ALIASES_FILE=${DESTDIR}${SYSTEM_ALIASES_FILE} | |
120 | ||
121 | if [ "${INFO_DIRECTORY}" != "" ] ; then | |
122 | INFO_DIRECTORY=${DESTDIR}${INFO_DIRECTORY} | |
123 | fi | |
124 | ||
125 | # Overrides of other things | |
126 | case "$inst_uid" in ?*) INST_UID="$inst_uid";; esac | |
127 | case "$inst_cp" in ?*) CP="$inst_cp";; esac | |
128 | case "$inst_mv" in ?*) MV="$inst_mv";; esac | |
129 | case "$inst_ln" in ?*) LN="$inst_ln";; esac | |
130 | case "$inst_chown" in ?*) CHOWN="$inst_chown";; esac | |
131 | case "$inst_chmod" in ?*) CHMOD="$inst_chmod";; esac | |
132 | case "$inst_dirname" in ?*) DIRNAME="$inst_dirname";; esac | |
133 | case "$inst_mkdir" in ?*) MKDIR="$inst_mkdir";; esac | |
134 | ||
135 | # chown is a special case; in at least one OS it is in /usr/etc instead | |
136 | # of in /usr/bin, and therefore not likely to be on the path. Another OS | |
137 | # has it in /usr/sbin. This fudge tries to cope with these variations. | |
138 | ||
139 | # Otherwise, and for other commands, we assume that the normal PATH will | |
140 | # give access to where they are on your operating system (normally /usr/bin | |
141 | # or /bin). | |
142 | ||
143 | if [ "${CHOWN}" = "chown" -a -x /usr/sbin/chown ] ; then | |
144 | CHOWN=/usr/sbin/chown | |
145 | fi | |
146 | ||
147 | if [ "${CHOWN}" = "chown" -a ! -f /usr/bin/chown -a -f /usr/etc/chown ] ; then | |
148 | CHOWN=/usr/etc/chown | |
149 | fi | |
150 | ||
14487e4c PH |
151 | # The values of CHOWN and MV taken from the Makefile are sometimes set to |
152 | # "look_for_it", which causes a search of the usual suspects. This code is | |
153 | # similar to that in exicyclog, but has to be fudged for upper/lower case | |
154 | # distinctions. | |
155 | ||
156 | for cmd in CHOWN MV ; do | |
157 | eval "oldcmd=\$$cmd" | |
158 | if [ "$oldcmd" != "look_for_it" ] ; then continue ; fi | |
159 | if [ "$cmd" = "CHOWN" ] ; then cmdlc="chown" ; fi | |
160 | if [ "$cmd" = "MV" ] ; then cmdlc="mv" ; fi | |
161 | newcmd=$cmdlc | |
162 | for dir in /bin /usr/bin /usr/sbin /usr/etc ; do | |
163 | if [ -f $dir/$cmdlc ] ; then | |
164 | newcmd=$dir/$cmdlc | |
165 | break | |
166 | fi | |
167 | done | |
168 | eval $cmd=$newcmd | |
169 | done | |
170 | ||
61ec970d PH |
171 | # See if the exim monitor has been built |
172 | ||
173 | if [ -f eximon -a -f eximon.bin ]; then | |
174 | exim_monitor="eximon eximon.bin" | |
175 | fi | |
176 | ||
177 | # If bin directory doesn't exist, try to create it | |
178 | ||
179 | if [ ! -d "${BIN_DIRECTORY}" ]; then | |
180 | echo mkdir -p ${BIN_DIRECTORY} | |
181 | ${real} mkdir -p ${BIN_DIRECTORY} | |
182 | if [ $? -ne 0 ]; then | |
183 | echo $com "" | |
184 | echo $com "*** Exim installation ${ver}failed ***" | |
185 | exit 1 | |
186 | else | |
187 | ${real} echo $com ${BIN_DIRECTORY} created | |
188 | fi | |
189 | fi | |
190 | ||
191 | # If no arguments, install everything | |
192 | ||
193 | if [ $# -gt 0 ]; then | |
194 | set $@ | |
195 | else | |
196 | set exim${EXE} ${exim_monitor} exim_dumpdb${EXE} exim_fixdb${EXE} \ | |
197 | exim_tidydb${EXE} exinext exiwhat exim_dbmbuild${EXE} exicyclog \ | |
198 | exigrep eximstats exipick exiqgrep exiqsumm exim_lock${EXE} \ | |
199 | exim_checkaccess | |
200 | fi | |
201 | ||
202 | echo $com "" | |
203 | echo $com Installation directory is ${BIN_DIRECTORY} | |
204 | echo $com "" | |
205 | ||
206 | while [ $# -gt 0 ]; do | |
207 | name=$1 | |
208 | shift | |
209 | ||
210 | if [ ! -s ${name} ]; then | |
211 | echo $com "" | |
212 | echo $com "*** `pwd`/${name} does not exist or is empty" | |
213 | echo $com "*** Have you built Exim successfully?" | |
214 | echo $com "*** Exim installation ${ver}failed ***" | |
215 | exit 1 | |
216 | fi | |
217 | ||
218 | # The exim binary is handled specially | |
219 | ||
220 | if [ $name = exim${EXE} ]; then | |
221 | version=exim-`./exim -bV -C /dev/null | \ | |
222 | awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE} | |
223 | ||
224 | if [ "${version}" = "exim-${EXE}" ]; then | |
225 | echo $com "" | |
226 | echo $com "*** Could not run ./exim to find version number ***" | |
227 | echo $com "*** Exim installation ${ver}failed ***" | |
228 | exit 1 | |
229 | fi | |
230 | ||
231 | # Do something only if newer than existing file, or no existing file | |
232 | ||
233 | if ../scripts/newer ${name} ${BIN_DIRECTORY}/${version}; then | |
234 | echo ${CP} ${name} ${BIN_DIRECTORY}/${version} | |
235 | ${real} ${CP} ${name} ${BIN_DIRECTORY}/${version} | |
236 | if [ $? -ne 0 ]; then | |
237 | echo $com "" | |
238 | echo $com "*** Exim installation ${ver}failed ***" | |
239 | exit 1 | |
240 | fi | |
241 | ||
242 | # After copy, set ownership and permissions, unless disabled | |
243 | ||
244 | if [ "$do_chown" != "no" ]; then | |
245 | echo ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version} | |
246 | ${real} ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version} | |
247 | if [ $? -ne 0 ]; then | |
248 | echo $com "" | |
249 | echo $com "*** You must be ${INST_UID} to install exim ***" | |
250 | exit 1 | |
251 | fi | |
252 | echo ${CHMOD} a+x ${BIN_DIRECTORY}/${version} | |
253 | ${real} ${CHMOD} a+x ${BIN_DIRECTORY}/${version} | |
254 | if [ $? -ne 0 ]; then | |
255 | echo $com "" | |
256 | echo $com "*** Exim installation ${ver}failed ***" | |
257 | exit 1 | |
258 | fi | |
259 | echo ${CHMOD} u+s ${BIN_DIRECTORY}/${version} | |
260 | ${real} ${CHMOD} u+s ${BIN_DIRECTORY}/${version} | |
261 | if [ $? -ne 0 ]; then | |
262 | echo $com "" | |
263 | echo $com "*** Exim installation ${ver}failed ***" | |
264 | exit 1 | |
265 | fi | |
266 | else | |
267 | echo $com "$CHOWN $INST_UID omitted: -no_chown was specified" | |
268 | echo $com "$CHMOD u+s omitted: -no_chown was specified" | |
269 | fi | |
270 | ||
271 | # Now sort out the "exim" alias, unless NO_SYMLINK is set. | |
272 | ||
273 | if [ "X$NO_SYMLINK" = "X" ] && [ "$do_symlink" != "no" ] ; then | |
274 | ||
275 | # First check whether "exim" exists in the directory. | |
276 | if [ -f ${BIN_DIRECTORY}/exim ]; then | |
277 | ||
278 | # If it's not a symbolic link, make a copy with the old version number | |
279 | if [ `ls -l ${BIN_DIRECTORY}/exim | cut -c1-1` != 'l' ]; then | |
280 | oldversion=exim-`${BIN_DIRECTORY}/exim -bV -C /dev/null | \ | |
281 | awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE} | |
282 | if [ "${version}" = "${oldversion}" ] ; then | |
283 | echo $com "" | |
284 | echo $com "*** Existing file called exim has the same version and compile number ***" | |
285 | echo $com "*** Exim installation ${ver}failed ***" | |
286 | exit 1 | |
287 | fi | |
288 | echo ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion} | |
289 | ${real} ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion} | |
290 | if [ $? -ne 0 ]; then | |
291 | echo $com "" | |
292 | echo $com "*** Exim installation ${ver}failed ***" | |
293 | exit 1 | |
294 | fi | |
295 | fi | |
296 | ||
297 | # Now we can move the name "exim" to be a symbolic link to the new | |
298 | # version, atomically. | |
299 | ||
300 | echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} temporary_exim\) | |
301 | (${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} temporary_exim) | |
302 | if [ $? -ne 0 ]; then | |
303 | echo $com "" | |
304 | echo $com "*** Exim installation ${ver}failed ***" | |
305 | exit 1 | |
306 | fi | |
307 | ||
308 | echo ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim | |
309 | ${real} ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim | |
310 | if [ $? -ne 0 ]; then | |
311 | echo $com "" | |
312 | echo $com "*** Exim installation ${ver}failed ***" | |
313 | exit 1 | |
314 | fi | |
315 | ||
316 | # If "exim" does not already exist just create a symbolic link. | |
317 | ||
318 | else | |
319 | echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} exim\) | |
320 | (${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} exim) | |
321 | if [ $? -ne 0 ]; then | |
322 | echo $com "" | |
323 | echo $com "*** Exim installation ${ver}failed ***" | |
324 | exit 1 | |
325 | fi | |
326 | fi | |
327 | ||
328 | else | |
329 | echo $com "creation of symlink omitted" | |
330 | if [ "X$NO_SYMLINK" != "X" ] ; then | |
331 | echo $com "(NO_SYMLINK is specified in Local/Makefile)" | |
332 | else | |
333 | echo $com "(-no_symlink was specified)" | |
334 | fi | |
335 | fi | |
336 | ||
337 | # New binary is not newer than the installed file | |
338 | ||
339 | else | |
340 | echo $com ${name} is not newer than ${BIN_DIRECTORY}/${version} | |
341 | fi | |
342 | ||
343 | # Handle everything other than the exim binary itself | |
344 | ||
345 | else | |
346 | if ../scripts/newer ${name} ${BIN_DIRECTORY}/${name}; then | |
347 | if [ -f ${BIN_DIRECTORY}/${name} ]; then | |
348 | echo ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O | |
349 | ${real} ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O | |
350 | if [ $? -ne 0 ]; then | |
351 | echo $com "" | |
352 | echo $com "*** Exim installation ${ver}failed ***" | |
353 | exit 1 | |
354 | fi | |
355 | fi | |
356 | echo ${CP} ${name} ${BIN_DIRECTORY} | |
357 | ${real} ${CP} ${name} ${BIN_DIRECTORY} | |
358 | if [ $? -ne 0 ]; then | |
359 | echo $com "" | |
360 | echo $com "*** Exim installation ${ver}failed ***" | |
361 | exit 1 | |
362 | fi | |
363 | else | |
364 | echo $com ${name} is not newer than ${BIN_DIRECTORY}/${name} | |
365 | fi | |
366 | fi | |
367 | ||
368 | done | |
369 | ||
370 | ||
371 | ||
372 | # If there is no configuration file, install the default, modifying it to refer | |
373 | # to the configured system aliases file. If there is no setting for | |
374 | # SYSTEM_ALIASES_FILE, use the traditional /etc/aliases. If the file does not | |
375 | # exist, install a default (dummy) for that too. | |
376 | ||
377 | # However, if CONFIGURE_FILE specifies a list of files, skip this code. | |
378 | ||
379 | echo $com "" | |
380 | ||
381 | if [ `expr "${CONFIGURE_FILE}" : ".*:"` -ne 0 ] ; then | |
382 | echo $com Runtime configuration is specified as the following list: | |
383 | echo $com ' ' ${CONFIGURE_FILE} | |
384 | echo $com Therefore, skipping automatic installation. | |
385 | ||
386 | elif [ ! -f ${CONFIGURE_FILE} ]; then | |
387 | echo $com Installing default configuration in ${CONFIGURE_FILE} | |
388 | echo $com because there is no existing configuration file. | |
389 | if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then | |
390 | SYSTEM_ALIASES_FILE=/etc/aliases | |
391 | echo $com This configuration has system aliases in ${SYSTEM_ALIASES_FILE}. | |
392 | fi | |
393 | ||
394 | echo ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}` | |
395 | ${real} ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}` | |
396 | ||
397 | echo sed -e '\\' | |
398 | echo " \"/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'\"" '\\' | |
399 | echo " ../src/configure.default > \${CONFIGURE_FILE}" | |
400 | ||
401 | # I can't find a way of writing this using the ${real} feature because | |
402 | # it seems that the output redirection always happens, even when -n was | |
403 | # specified. So control it the hard way. | |
404 | ||
405 | if [ "$real" = "" ] ; then | |
406 | sed -e \ | |
407 | "/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'" \ | |
408 | ../src/configure.default > ${CONFIGURE_FILE} | |
409 | else | |
410 | true | |
411 | fi | |
412 | ||
413 | if [ $? -ne 0 ]; then | |
414 | echo $com "" | |
415 | echo $com "*** Exim installation ${ver}failed ***" | |
416 | exit 1 | |
417 | fi | |
418 | if [ ! -f ${SYSTEM_ALIASES_FILE} ]; then | |
419 | echo $com '****' | |
420 | echo $com Installing a dummy ${SYSTEM_ALIASES_FILE} file because you do not have | |
421 | echo $com one, and the default configuration requires it. You should | |
422 | echo $com edit ${SYSTEM_ALIASES_FILE} and at least create an alias for postmaster. | |
423 | echo $com '***' | |
424 | echo ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE} | |
425 | ${real} ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE} | |
426 | fi | |
427 | ||
428 | else | |
429 | echo $com Configuration file ${CONFIGURE_FILE} already exists | |
430 | fi | |
431 | ||
432 | # Install info files if the directory is defined and the Texinfo | |
433 | # source documentation is present. | |
434 | ||
435 | if [ "${INFO_DIRECTORY}" != "" -a -f ../doc/spec.texinfo ] ; then | |
436 | echo $com "" | |
437 | if [ ! -d "${INFO_DIRECTORY}" ] ; then | |
438 | echo mkdir -p ${INFO_DIRECTORY} | |
439 | ${real} mkdir -p ${INFO_DIRECTORY} | |
440 | if [ $? -ne 0 ]; then | |
441 | echo $com "" | |
442 | echo $com "*** Exim installation ${ver}failed ***" | |
443 | exit 1 | |
444 | else | |
445 | echo $com ${INFO_DIRECTORY} created | |
446 | fi | |
447 | fi | |
448 | ||
449 | echo $com Info installation directory is ${INFO_DIRECTORY} | |
450 | echo $com "" | |
451 | ||
452 | ${real} makeinfo --no-split --output exim.info ../doc/spec.texinfo | |
453 | echo ${CP} exim.info ${INFO_DIRECTORY} | |
454 | ${real} ${CP} exim.info ${INFO_DIRECTORY} | |
455 | ${real} install-info --section="Exim" \ | |
456 | --entry "* User guide: (exim). Exim manual" \ | |
457 | ${INFO_DIRECTORY}/exim.info ${INFO_DIRECTORY}/dir | |
458 | ${real} makeinfo --no-split --output exim_filter.info ../doc/filter.texinfo | |
459 | echo ${CP} exim_filter.info ${INFO_DIRECTORY} | |
460 | ${real} ${CP} exim_filter.info ${INFO_DIRECTORY} | |
461 | ${real} install-info --section="Exim" \ | |
462 | --entry "* Filtering: (exim_filter). Filtering mail with Exim" \ | |
463 | ${INFO_DIRECTORY}/exim_filter.info ${INFO_DIRECTORY}/dir | |
464 | fi | |
465 | ||
466 | # Everything OK | |
467 | ||
468 | echo $com "" | |
469 | echo $com Exim installation ${ver}complete | |
470 | ||
471 | # End of exim_install |